/*
$Log$
+Revision 1.20 2001/03/29 22:01:53 barbera
+New flag added to change the material for some service supports as asked by the PMD people. Some changes to the services due to the new drawings from the engineers
+
+Revision 1.19 2001/03/29 05:28:56 barbera
+Rails material changed from aluminum to carbon fiber according with the decision of the last Technical Board
+
+Revision 1.18 2001/03/28 06:40:21 barbera
+Central and services mother volumes made consistenf for detailed and coarse geometry. Switch for rails added to the coarse geometries
+
+Revision 1.17 2001/03/13 18:13:30 barbera
+Some mother volumes sligthly modified to eliminate an overlap with the absorber
+
+Revision 1.16 2001/02/09 00:05:31 nilsen
+Added fMajor/MinorVersion variables and made other changes to better make
+use of the new code changes in AliITSgeom related classes.
+
+Revision 1.15 2001/01/30 09:23:13 hristov
+Streamers removed (R.Brun)
+
+Revision 1.14 2001/01/17 07:41:29 barbera
+Some media parameters modified
+
+Revision 1.13 2001/01/15 13:13:52 barbera
+Some comments added
+
+Revision 1.12 2000/12/10 16:00:44 barbera
+Added last definition of special media like end-ladder boxes and cones
+
Revision 1.11 2000/10/30 08:02:25 barbera
PCON's changed into simpler CONS and TUBS. Services now allow for the rails to go through them.
// strongly encouraged to uses AliITSv5.
// //
///////////////////////////////////////////////////////////////////////////////
-
+#include <iostream.h>
#include <TMath.h>
#include <TRandom.h>
#include <TVector.h>
// Standard default constructor for the ITS version 7.
////////////////////////////////////////////////////////////////////////
- fIdN = 6;
- fIdName = new TString[fIdN];
- fIdName[0] = "ITS1";
- fIdName[1] = "ITS2";
- fIdName[2] = "ITS3";
- fIdName[3] = "ITS4";
- fIdName[4] = "ITS5";
- fIdName[5] = "ITS6";
- fIdSens = new Int_t[fIdN];
- for (Int_t i=0;i<fIdN;i++) fIdSens[i]=fIdName[i].Length();
+ fIdN = 0;
+ fIdName = 0;
+ fIdSens = 0;
+ fMajorVersion = 8;
+ fMinorVersion = 0;
}
//_____________________________________________________________________________
AliITSvPPRcoarsesymm::AliITSvPPRcoarsesymm(const char *name, const char *title) : AliITS(name, title){
// Standard constructor for the ITS version 7.
////////////////////////////////////////////////////////////////////////
- fIdN = 6;
- fIdName = new TString[fIdN];
- fIdName[0] = "ITS1";
- fIdName[1] = "ITS2";
- fIdName[2] = "ITS3";
- fIdName[3] = "ITS4";
- fIdName[4] = "ITS5";
- fIdName[5] = "ITS6";
- fIdSens = new Int_t[fIdN];
- for (Int_t i=0;i<fIdN;i++) fIdSens[i]=fIdName[i].Length();
-
+ fIdN = 6;
+ fIdName = new TString[fIdN];
+ fIdName[0] = "ITS1";
+ fIdName[1] = "ITS2";
+ fIdName[2] = "ITS3";
+ fIdName[3] = "ITS4";
+ fIdName[4] = "ITS5";
+ fIdName[5] = "ITS6";
+ fIdSens = new Int_t[fIdN];
+ for (Int_t i=0;i<fIdN;i++) fIdSens[i]=0;
+ fMajorVersion = 9;
+ fMinorVersion = 0;
}
//____________________________________________________________________________
AliITSvPPRcoarsesymm::AliITSvPPRcoarsesymm(const AliITSvPPRcoarsesymm &source){
// Copy Constructor for ITS version 7.
////////////////////////////////////////////////////////////////////////
if(&source == this) return;
- printf("Not allowed to copy AliITSvPPRcoarsesymm\n");
+ Warning("Copy Constructor","Not allowed to copy AliITSvPPRcoarsesymm");
return;
}
//_____________________________________________________________________________
// Assignment operator for the ITS version 7.
////////////////////////////////////////////////////////////////////////
if(&source == this) return *this;
- printf("Not allowed to copy AliITSvPPRcoarsesymm\n");
+ Warning("= operator","Not allowed to copy AliITSvPPRcoarsesymm");
return *this;
}
//_____________________________________________________________________________
Float_t dits[3], rlim, zmax;
Float_t zpos;
- Float_t pcits[15], xltpc;
- Int_t idrotm[399], i;
- Float_t dgh[50];
+ Float_t pcits[100], ztpc;
+ Int_t idrotm[1999], i;
+ Float_t dgh[100];
+
+ Int_t rails = 1; // flag for rails (1 --> rails in; 0 --> rails out)
+ Int_t suppmat = 0; // flag to change the material of the services
+ // supports (=0 copper, =1 aluminum, =2 carbon)
+ rails = GetRails();
+
+ if(rails != 0 && rails != 1) {
+ cout << "WARNING: the switch for rails is not set neither to 0 (rails out) nor to 1 (rails in)."
+ " The default value of 1 (rails in) will be used." << endl;
+ }
+
+ if (rails == 0 ) {
+ cout << "Rails are out." << endl;
+ } else {
+ cout << "Rails are in." << endl;
+ }
+ suppmat = GetSupportMaterial();
+
+ if (suppmat != 0 && suppmat != 1 && suppmat != 2) {
+ cout << "WARNING: the flag for the material of services supports is not set neither to 0 (copper) nor to 1 (aluminum) nor to 2 (carbon)."
+ " The default value of 0 (copper) will be used." << endl;
+ }
+
+ if (suppmat == 0) {
+ cout << "The material of the services supports is copper." << endl;
+ } else if (suppmat == 1){
+ cout << "The material of the services supports is aluminum." << endl;
+ } else {
+ cout << "The material of the services supports is carbon." << endl;
+ }
+
+
Int_t *idtmed = fIdtmed->GetArray()-199;
// CONVERT INTO CM (RL(SI)=9.36 CM)
// FIELD CAGE HALF LENGTH
rlim = 56.;
- zmax = 76.708;
- xltpc = 284.;
+ zmax = 74.;
+ ztpc = 284.;
// --- Define ghost volume containing the whole ITS (including services)
// and fill it with air
dgh[0] = 0.;
dgh[1] = 360.;
- dgh[2] = 12.;
- dgh[3] = -xltpc-5.-0.1;
+ dgh[2] = 16.;
+ dgh[3] = -ztpc-5.-0.1;
dgh[4] = 62.4;
dgh[5] = 85.;
- dgh[6] = -xltpc;
- dgh[7] = 61.5;
+ dgh[6] = -ztpc;
+ dgh[7] = 62;
dgh[8] = 85.;
- dgh[9] = -xltpc;
- dgh[10] = 61.5;
- dgh[11] = 61.5+4.;
- dgh[12] = -100.7;
- dgh[13] = 44.9;
- dgh[14] = 56.1;
- dgh[15] = -77.2;
- dgh[16] = 44.9;
- dgh[17] = 56.1;
- dgh[18] = -40.;
- dgh[19] = 3.295;
- dgh[20] = 56.1;
-
-/*
- dgh[21] = -35.;
- dgh[22] = 3.295;
- dgh[23] = 56.1;
-
- dgh[24] = -35.;
- dgh[25] = 5.;
- dgh[26] = 56.1;
-
- dgh[27] = -29.;
- dgh[28] = 5.;
- dgh[29] = 56.1;
-
- dgh[30] = -29.;
- dgh[31] = 3.295;
- dgh[32] = 56.1;
-
-*/
-
-
- dgh[21] = 40.;
- dgh[22] = 3.295;
- dgh[23] = 56.1;
- dgh[24] = 77.2;
- dgh[25] = 44.9;
- dgh[26] = 56.1;
- dgh[27] = 100.7;
- dgh[28] = 44.9;
- dgh[29] = 56.1;
- dgh[30] = xltpc;
- dgh[31] = 61.5;
- dgh[32] = 61.5+4.;
- dgh[33] = xltpc;
- dgh[34] = 61.5;
- dgh[35] = 85.;
- dgh[36] = xltpc+4.+0.1;
- dgh[37] = 62.4;
- dgh[38] = 85.;
-
- gMC->Gsvolu("ITSV", "PCON", idtmed[275], dgh, 39);
+ dgh[9] = -ztpc;
+ dgh[10] = 62;
+ dgh[11] = 62+4.;
+ dgh[12] = -97.5;
+ dgh[13] = 46;
+ dgh[14] = rlim+0.1;
+ dgh[15] = -zmax;
+ dgh[16] = 46;
+ dgh[17] = rlim+0.1;
+ dgh[18] = -48;
+ dgh[19] = 6;
+ dgh[20] = rlim+0.1;
+ dgh[21] = -28.6;
+ dgh[22] = 6;
+ dgh[23] = rlim+0.1;
+ dgh[24] = -27.6;
+ dgh[25] = 3.295;
+ dgh[26] = rlim+0.1;
+ dgh[27] = 27.6;
+ dgh[28] = 3.295;
+ dgh[29] = rlim+0.1;
+ dgh[30] = 28.6;
+ dgh[31] = 6;
+ dgh[32] = rlim+0.1;
+ dgh[33] = 48;
+ dgh[34] = 6;
+ dgh[35] = rlim+0.1;
+ dgh[36] = zmax;
+ dgh[37] = 46;
+ dgh[38] = rlim+0.1;
+ dgh[39] = 97.5;
+ dgh[40] = 46;
+ dgh[41] = rlim+0.1;
+ dgh[42] = ztpc;
+ dgh[43] = 62;
+ dgh[44] = 62+4.;
+ dgh[45] = ztpc;
+ dgh[46] = 62;
+ dgh[47] = 85.;
+ dgh[48] = ztpc+4.+0.1;
+ dgh[49] = 62.4;
+ dgh[50] = 85.;
+ gMC->Gsvolu("ITSV", "PCON", idtmed[275], dgh, 51);
// --- Place the ghost volume in its mother volume (ALIC) and make it
// invisible
// --- Define ghost volume containing the six layers and fill it with air
-
+
dgh[0] = 0.;
dgh[1] = 360.;
- dgh[2] = 4.;
- dgh[3] = -77.2;
- dgh[4] = 45.;
- dgh[5] = 56.;
- dgh[6] = -40.;
- dgh[7] = 3.3;
- dgh[8] = 56.;
- dgh[9] = 40.;
- dgh[10] = 3.3;
- dgh[11] = 56.;
- dgh[12] = 77.2;
- dgh[13] = 45.;
- dgh[14] = 56.;
- gMC->Gsvolu("ITSD", "PCON", idtmed[275], dgh, 15);
+ dgh[2] = 8.;
+ dgh[3] = -zmax;
+ dgh[4] = 46.;
+ dgh[5] = rlim;
+ dgh[6] = -47.5;
+ dgh[7] = 6.005;
+ dgh[8] = rlim;
+ dgh[9] = -28.5;
+ dgh[10] = 6.005;
+ dgh[11] = rlim;
+ dgh[12] = -27.5;
+ dgh[13] = 3.3;
+ dgh[14] = rlim;
+ dgh[15] = 27.5;
+ dgh[16] = 3.3;
+ dgh[17] = rlim;
+ dgh[18] = 28.5;
+ dgh[19] = 6.005;
+ dgh[20] = rlim;
+ dgh[21] = 47.5;
+ dgh[22] = 6.005;
+ dgh[23] = rlim;
+ dgh[24] = zmax;
+ dgh[25] = 46.;
+ dgh[26] = rlim;
+ gMC->Gsvolu("ITSD", "PCON", idtmed[275], dgh, 27);
// --- Place the ghost volume in its mother volume (ALIC) and make it
// invisible
gMC->Gspos("ITSD", 1, "ITSV", 0., 0., 0., 0, "ONLY");
- //gMC->Gsatt("ITSV", "SEEN", 0);
+ //gMC->Gsatt("ITSD", "SEEN", 0);
// ITS LAYERS (SILICON)
pcits[2] = 8.5+0.1;
pcits[3] = 28.;
pcits[4] = 28.+0.1;
- gMC->Gsvolu("ICO1", "CONE", idtmed[274], pcits, 5);
+ gMC->Gsvolu("ICO1", "CONE", idtmed[238], pcits, 5);
AliMatrix(idrotm[200], 90., 0., 90., 90., 180., 0.);
gMC->Gspos("ICO1", 1, "ITSD", 0., 0., 42.5+pcits[0], 0, "ONLY");
gMC->Gspos("ICO1", 2, "ITSD", 0., 0., -(42.5+pcits[0]), idrotm[200], "ONLY");
pcits[0] = (59.5-0.13/2.)/2.;
pcits[1] = (59.5+0.13/2.)/2.;
pcits[2] = 57.;
- gMC->Gsvolu("ICY2", "TUBE", idtmed[240], pcits, 3);
+ gMC->Gsvolu("ICY2", "TUBE", idtmed[274], pcits, 3);
gMC->Gspos("ICY2", 1, "ITSD", 0., 0., 0., 0, "ONLY");
// DEFINE END CONES FOR SSD
pcits[2] = 28.+0.1;
pcits[3] = 47.;
pcits[4] = 47.+0.1;
- gMC->Gsvolu("ICO2", "CONE", idtmed[266], pcits, 5);
+ gMC->Gsvolu("ICO2", "CONE", idtmed[264], pcits, 5);
gMC->Gspos("ICO2", 1, "ITSD", 0., 0., 59.+pcits[0], 0, "ONLY");
gMC->Gspos("ICO2", 2, "ITSD", 0., 0., -(59.+pcits[0]), idrotm[200], "ONLY");
- // SERVICES
+ // **************************** SERVICES *********************************
+
+
+ // --- DEFINE CABLES AT THE END OF THE ITS CONES - COPPER PART
+ // UPPER PART
+ dgh[0] = 46.;
+ dgh[1] = 46.+1.0;
+ dgh[2] = 9.5;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+
+ if (suppmat == 0) {
+ gMC->Gsvolu("I1CU", "TUBS", idtmed[279], dgh, 5); // copper
+ } else if (suppmat == 1) {
+ gMC->Gsvolu("I1CU", "TUBS", idtmed[285], dgh, 5); // aluminum
+ } else {
+ gMC->Gsvolu("I1CU", "TUBS", idtmed[274], dgh, 5); // carbon
+ }
+ gMC->Gspos("I1CU", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
+ gMC->Gspos("I1CU", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
// --- DEFINE CABLES AT THE END OF THE ITS CONES - COPPER PART
+ // LOWER PART
- dgh[0] = 45.;
- dgh[1] = 45.+1.0;
+ dgh[0] = 46.;
+ dgh[1] = 46.+1.0;
dgh[2] = 9.5;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
- gMC->Gsvolu("ICCU", "TUBE", idtmed[279], dgh, 3);
- gMC->Gspos("ICCU", 1, "ITSV", 0., 0., 86.7, 0, "ONLY");
- gMC->Gspos("ICCU", 2, "ITSV", 0., 0., -86.7, idrotm[200], "ONLY");
-
+ if (suppmat == 0) {
+ gMC->Gsvolu("I2CU", "TUBS", idtmed[279], dgh, 5); // copper
+ } else if (suppmat == 1) {
+ gMC->Gsvolu("I2CU", "TUBS", idtmed[285], dgh, 5); // aluminum
+ } else {
+ gMC->Gsvolu("I2CU", "TUBS", idtmed[274], dgh, 5); // carbon
+ }
+ gMC->Gspos("I2CU", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
+ gMC->Gspos("I2CU", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
+
+
// --- DEFINE CABLES AT THE END OF THE ITS CONES - CARBON PART
+ // UPPER PART
- dgh[0] = 45.+1.0;
- dgh[1] = 45.+1.0+1.5;
+ dgh[0] = 46.+1.0;
+ dgh[1] = 46.+1.0+1.5;
dgh[2] = 9.5;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
- gMC->Gsvolu("ICCC", "TUBE", idtmed[274], dgh, 3);
- gMC->Gspos("ICCC", 1, "ITSV", 0., 0., 86.7, 0, "ONLY");
- gMC->Gspos("ICCC", 2, "ITSV", 0., 0., -86.7, idrotm[200], "ONLY");
+ gMC->Gsvolu("I1CC", "TUBS", idtmed[274], dgh, 5);
+ gMC->Gspos("I1CC", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
+ gMC->Gspos("I1CC", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
- // --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES
+ // --- DEFINE CABLES AT THE END OF THE ITS CONES - CARBON PART
+ // LOWER PART
+
+ dgh[0] = 46.+1.0;
+ dgh[1] = 46.+1.0+1.5;
+ dgh[2] = 9.5;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
- dgh[0] = 45.;
+ gMC->Gsvolu("I2CC", "TUBS", idtmed[274], dgh, 5);
+ gMC->Gspos("I2CC", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
+ gMC->Gspos("I2CC", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
+
+ // --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES
+ // UPPER PART
+
+ dgh[0] = 46.;
dgh[1] = 56.;
dgh[2] = 2.25;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
- gMC->Gsvolu("IPAN", "TUBE", idtmed[285], dgh, 3);
- gMC->Gspos("IPAN", 1, "ITSV", 0., 0., 98.45, 0, "ONLY");
- gMC->Gspos("IPAN", 2, "ITSV", 0., 0., -98.45, idrotm[200], "ONLY");
+ gMC->Gsvolu("IPA1", "TUBS", idtmed[285], dgh, 5);
+ gMC->Gspos("IPA1", 1, "ITSV", 0., 0., 95.25, 0, "ONLY");
+ gMC->Gspos("IPA1", 2, "ITSV", 0., 0., -95.25, idrotm[200], "ONLY");
+
+
+ // --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES
+ // LOWER PART
+
+ dgh[0] = 46.;
+ dgh[1] = 56.;
+ dgh[2] = 2.25;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ gMC->Gsvolu("IPA2", "TUBS", idtmed[285], dgh, 5);
+ gMC->Gspos("IPA2", 1, "ITSV", 0., 0., 95.25, 0, "ONLY");
+ gMC->Gspos("IPA2", 2, "ITSV", 0., 0., -95.25, idrotm[200], "ONLY");
+
// --- DEFINE CABLES/COOLING BELOW THE TPC - COPPER PART - UPPER PART
- dgh[0] = (xltpc-100.7)/2.;
- dgh[1] = 45.2;
- dgh[2] = 45.2+1.0;
- dgh[3] = 61.8;
- dgh[4] = 61.8+1.0;
+ dgh[0] = (ztpc-97.5)/2.;
+ dgh[1] = 46.2;
+ dgh[2] = 46.2+1.0;
+ dgh[3] = 62.3;
+ dgh[4] = 62.3+1.0;
dgh[5] = 12.;
dgh[6] = 168.;
gMC->Gsvolu("ICU1", "CONS", idtmed[279], dgh, 7);
- gMC->Gspos("ICU1", 1, "ITSV", 0., 0., 100.7+dgh[0], 0, "ONLY");
- gMC->Gspos("ICU1", 2, "ITSV", 0., 0., -(100.7+dgh[0]), idrotm[200], "ONLY");
+ gMC->Gspos("ICU1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICU1", 2, "ITSV", 0., 0., -(97.5+dgh[0]), idrotm[200], "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC - COPPER PART - LOWER PART
- dgh[0] = (xltpc-100.7)/2.;
- dgh[1] = 45.2;
- dgh[2] = 45.2+1.0;
- dgh[3] = 61.8;
- dgh[4] = 61.8+1.0;
+ dgh[0] = (ztpc-97.5)/2.;
+ dgh[1] = 46.2;
+ dgh[2] = 46.2+1.0;
+ dgh[3] = 62.3;
+ dgh[4] = 62.3+1.0;
dgh[5] = 192.;
dgh[6] = 348.;
gMC->Gsvolu("ICU2", "CONS", idtmed[279], dgh, 7);
- gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 100.7+dgh[0], 0, "ONLY");
- gMC->Gspos("ICU2", 2, "ITSV", 0., 0., -(100.7+dgh[0]), idrotm[200], "ONLY");
+ gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICU2", 2, "ITSV", 0., 0., -(97.5+dgh[0]), idrotm[200], "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC - CARBON PART - UPPER PART
- dgh[0] = (xltpc-100.7)/2.;
- dgh[1] = 45.2+1.0;
- dgh[2] = 45.2+1.0+1.5;
- dgh[3] = 61.8+1.0;
- dgh[4] = 61.8+1.0+1.5;
+ dgh[0] = (ztpc-97.5)/2.;
+ dgh[1] = 46.2+1.0;
+ dgh[2] = 46.2+1.0+1.5;
+ dgh[3] = 62.3+1.0;
+ dgh[4] = 62.3+1.0+1.5;
dgh[5] = 12.;
dgh[6] = 168.;
gMC->Gsvolu("ICC1", "CONS", idtmed[274], dgh, 7);
- gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 100.7+dgh[0], 0, "ONLY");
- gMC->Gspos("ICC1", 2, "ITSV", 0., 0., -(100.7+dgh[0]), idrotm[200], "ONLY");
+ gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICC1", 2, "ITSV", 0., 0., -(97.5+dgh[0]), idrotm[200], "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC - CARBON PART - LOWER PART
- dgh[0] = (xltpc-100.7)/2.;
- dgh[1] = 45.2+1.0;
- dgh[2] = 45.2+1.0+1.5;
- dgh[3] = 61.8+1.0;
- dgh[4] = 61.8+1.0+1.5;
+ dgh[0] = (ztpc-97.5)/2.;
+ dgh[1] = 46.2+1.0;
+ dgh[2] = 46.2+1.0+1.5;
+ dgh[3] = 62.3+1.0;
+ dgh[4] = 62.3+1.0+1.5;
dgh[5] = 192.;
dgh[6] = 348.;
gMC->Gsvolu("ICC2", "CONS", idtmed[274], dgh, 7);
- gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 100.7+dgh[0], 0, "ONLY");
- gMC->Gspos("ICC2", 2, "ITSV", 0., 0., -(100.7+dgh[0]), idrotm[200], "ONLY");
+ gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICC2", 2, "ITSV", 0., 0., -(97.5+dgh[0]), idrotm[200], "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC - COPPER PART - UPPER PART
- dgh[0] = 62.5;
+ dgh[0] = 62.1;
dgh[1] = 74.5;
dgh[2] = 0.5;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICU3", "TUBS", idtmed[279], dgh, 5);
- gMC->Gspos("ICU3", 1, "ITSV", 0., 0., xltpc+1.5+dgh[2], 0, "ONLY");
- gMC->Gspos("ICU3", 2, "ITSV", 0., 0., -(xltpc+1.5+dgh[2]), idrotm[200], "ONLY");
+ gMC->Gspos("ICU3", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICU3", 2, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]), idrotm[200], "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC - COPPER PART - LOWER PART
- dgh[0] = 62.5;
+ dgh[0] = 62.1;
dgh[1] = 74.5;
dgh[2] = 0.5;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICU4", "TUBS", idtmed[279], dgh, 5);
- gMC->Gspos("ICU4", 1, "ITSV", 0., 0., xltpc+1.5+dgh[2], 0, "ONLY");
- gMC->Gspos("ICU4", 2, "ITSV", 0., 0., -(xltpc+1.5+dgh[2]), idrotm[200], "ONLY");
+ gMC->Gspos("ICU4", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICU4", 2, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]), idrotm[200], "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC - CARBON PART - UPPER PART
- dgh[0] = 62.5;
+ dgh[0] = 62.1;
dgh[1] = 74.5;
dgh[2] = 0.75;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICC3", "TUBS", idtmed[274], dgh, 5);
- gMC->Gspos("ICC3", 1, "ITSV", 0., 0., xltpc+dgh[2], 0, "ONLY");
- gMC->Gspos("ICC3", 2, "ITSV", 0., 0., -(xltpc+dgh[2]), idrotm[200], "ONLY");
+ gMC->Gspos("ICC3", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICC3", 2, "ITSV", 0., 0., -(ztpc+dgh[2]), idrotm[200], "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC - CARBON PART - LOWER PART
- dgh[0] = 62.5;
+ dgh[0] = 62.1;
dgh[1] = 74.5;
dgh[2] = 0.75;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICC4", "TUBS", idtmed[274], dgh, 5);
- gMC->Gspos("ICC4", 1, "ITSV", 0., 0., xltpc+dgh[2], 0, "ONLY");
- gMC->Gspos("ICC4", 2, "ITSV", 0., 0., -(xltpc+dgh[2]), idrotm[200], "ONLY");
+ gMC->Gspos("ICC4", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICC4", 2, "ITSV", 0., 0., -(ztpc+dgh[2]), idrotm[200], "ONLY");
// --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - UPPER PART
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("IHK1", "TUBS", idtmed[284], dgh, 5);
- gMC->Gspos("IHK1", 1, "ITSV", 0., 0., -xltpc-dgh[2], 0, "ONLY");
+ gMC->Gspos("IHK1", 1, "ITSV", 0., 0., -ztpc-dgh[2], 0, "ONLY");
// --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - LOWER PART
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("IHK2", "TUBS", idtmed[284], dgh, 5);
- gMC->Gspos("IHK2", 1, "ITSV", 0., 0., -xltpc-dgh[2], 0, "ONLY");
+ gMC->Gspos("IHK2", 1, "ITSV", 0., 0., -ztpc-dgh[2], 0, "ONLY");
// --- DEFINE RAILS BETWEEN THE ITS AND THE TPC
- //dgh[0] = 0.85;
- //dgh[1] = 10.;
- //dgh[2] = 190.;
- //gMC->Gsvolu("IRAI", "BOX ", idtmed[285], dgh, 3);
- //gMC->Gspos("IRAI", 1, "ITSV", 53., 0., -69.5, 0, "ONLY");
- //gMC->Gspos("IRAI", 2, "ITSV", -53., 0., -69.5, 0, "ONLY");
+ if (rails == 1) {
+
+ dgh[0] = 2.;
+ dgh[1] = 8.;
+ dgh[2] = 190.;
+ gMC->Gsvolu("IRA1", "BOX ", idtmed[239], dgh, 3);
+ gMC->Gspos("IRA1", 1, "ITSV", 53.5, 0., -69.5, 0, "ONLY");
+ gMC->Gsvolu("IRA2", "BOX ", idtmed[239], dgh, 3);
+ gMC->Gspos("IRA2", 1, "ITSV", -53.5, 0., -69.5, 0, "ONLY");
+
+ dgh[0] = 2.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
+ dgh[1] = 8.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
+ dgh[2] = 190.;
+ gMC->Gsvolu("IRA3", "BOX ", idtmed[275], dgh, 3);
+ gMC->Gspos("IRA3", 1, "IRA1", 0., 0., 0., 0, "ONLY");
+ gMC->Gsvolu("IRA4", "BOX ", idtmed[275], dgh, 3);
+ gMC->Gspos("IRA4", 1, "IRA2", 0., 0., 0., 0, "ONLY");
+
+ }
// --- DEFINE CYLINDERS HOLDING RAILS BETWEEN THE ITS AND THE TPC
-
- dgh[0] = 58.;
+ dgh[0] = 56.9;
dgh[1] = 59.;
- dgh[2] = 0.6;
+ dgh[2] = 0.6;
gMC->Gsvolu("ICYL", "TUBE", idtmed[285], dgh, 3);
- gMC->Gspos("ICYL", 1, "ALIC", 0., 0., 74., 0, "ONLY");
- gMC->Gspos("ICYL", 2, "ALIC", 0., 0., -74., idrotm[200], "ONLY");
-
+ gMC->Gspos("ICYL", 1, "ALIC", 0., 0., 74.1, 0, "ONLY");
+ gMC->Gspos("ICYL", 2, "ALIC", 0., 0., -74.1, idrotm[200], "ONLY");
+
+ // --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE CYLINDERS
+
+ dgh[0] = 0.;
+ dgh[1] = 3.;
+ dgh[2] = 5.; // 5. comes from the fact that the volume has to be 567.6/2 cm^3
+ gMC->Gsvolu("ISR1", "TUBE", idtmed[286], dgh, 3);
+ gMC->Gspos("ISR1", 1, "ALIC", 54.9, 11., 79.5, 0, "ONLY");
+ gMC->Gspos("ISR1", 2, "ALIC", 54.9, -11., 79.5, 0, "ONLY");
+ gMC->Gspos("ISR1", 3, "ALIC", -54.9, 11., 79.5, 0, "ONLY");
+ gMC->Gspos("ISR1", 4, "ALIC", -54.9, -11., 79.5, 0, "ONLY");
+ gMC->Gspos("ISR1", 5, "ALIC", 54.9, 11., -79.5, 0, "ONLY");
+ gMC->Gspos("ISR1", 6, "ALIC", 54.9, -11., -79.5, 0, "ONLY");
+ gMC->Gspos("ISR1", 7, "ALIC", -54.9, 11., -79.5, 0, "ONLY");
+ gMC->Gspos("ISR1", 8, "ALIC", -54.9, -11., -79.5, 0, "ONLY");
+
+ // --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE ABSORBER
+
+ dgh[0] = 5.;
+ dgh[1] = 12.;
+ dgh[2] = 5.;
+ gMC->Gsvolu("ISR2", "BOX ", idtmed[285], dgh, 3);
+ gMC->Gspos("ISR2", 1, "ALIC", 53.5, 0., 125.5, 0, "ONLY");
+ gMC->Gsvolu("ISR3", "BOX ", idtmed[285], dgh, 3);
+ gMC->Gspos("ISR3", 1, "ALIC", -53.5, 0., 125.5, 0, "ONLY");
+
+ dgh[0] = 5.-2.;
+ dgh[1] = 12.-2.;
+ dgh[2] = 5.;
+ gMC->Gsvolu("ISR4", "BOX ", idtmed[275], dgh, 3);
+ gMC->Gspos("ISR4", 1, "ISR2", 0., 0., 0., 0, "ONLY");
+ gMC->Gsvolu("ISR5", "BOX ", idtmed[275], dgh, 3);
+ gMC->Gspos("ISR5", 1, "ISR3", 0., 0., 0., 0, "ONLY");
+
+ // --- DEFINE SUPPORTS TO ATTACH THE ITS TO THE TPC
+
+ dgh[0] = 0.;
+ dgh[1] = 5.;
+ dgh[2] = 2.;
+ gMC->Gsvolu("ISR6", "TUBE", idtmed[285], dgh, 3);
+ gMC->Gspos("ISR6", 1, "ALIC", 0., 54., 77., 0, "ONLY");
+ gMC->Gspos("ISR6", 2, "ALIC", 0., 54., -77., 0, "ONLY");
+ gMC->Gspos("ISR6", 3, "ALIC", 0., -54., -77., 0, "ONLY");
+
// --- Outputs the geometry tree in the EUCLID/CAD format
if (fEuclidOut) {
// Create ITS materials
// This function defines the default materials used in the Geant
// Monte Carlo simulations for the geometries AliITSv1, AliITSv3,
- // AliITSvPPRcoarsesymm, AliITSvPPRcoarseasymm.
+ // AliITSvPPRcoarseasymm.
// In general it is automatically replaced by
// the CreatMaterials routine defined in AliITSv?. Should the function
// CreateMaterials not exist for the geometry version you are using this
// 200-224 --> Silicon Pixel Detectors (detectors, chips, buses, cooling,..)
- AliMaterial(0, "SPD Si$", 28.0855, 14., 2.33, 9.36, 999);
- AliMaterial(1, "SPD Si chip$", 28.0855, 14., 2.33, 9.36, 999);
- AliMaterial(2, "SPD Si bus$", 28.0855, 14., 2.33, 9.36, 999);
- AliMaterial(3, "SPD C$", 12.011, 6., 2.265,18.8, 999);
+ AliMaterial(0, "SPD Si$", 28.0855, 14., 2.33, 9.36, 999.);
+ AliMaterial(1, "SPD Si chip$", 28.0855, 14., 2.33, 9.36, 999.);
+ AliMaterial(2, "SPD Si bus$", 28.0855, 14., 2.33, 9.36, 999.);
+ AliMaterial(3, "SPD C$", 12.011, 6., 2.265,18.8, 999.);
// v. dens
- AliMaterial(4, "SPD Air$", 14.61, 7.3, .001205, 30423., 999);
+ AliMaterial(4, "SPD Air$", 14.61, 7.3, .001205, 30423., 999.);
AliMaterial(5, "SPD Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16);
- AliMaterial(6, "SPD Al$", 26.981539, 13., 2.6989, 8.9, 999);
+ AliMaterial(6, "SPD Al$", 26.981539, 13., 2.6989, 8.9, 999.);
AliMixture( 7, "SPD Water $", awat, zwat, denswat, -2, wwat);
AliMixture( 8, "SPD Freon$", afre, zfre, densfre, -2, wfre);
- AliMaterial(9, "SPD End ladder$", 55.845, 26., 7.87/10., 1.76*10., 999);
- //AliMaterial(9, "SPD End ladder$", 55.845, 26., -7.87/10., -1.76*10., 999);
- AliMaterial(10, "SPD cone$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
+ AliMaterial(9, "SPD End ladder$", 55.845, 26., 7.87/10., 1.76*10., 999.);
+ //AliMaterial(9, "SPD End ladder$", 55.845, 26., -7.87/10., -1.76*10., 999.);
+ AliMaterial(10, "SPD cone$",28.0855, 14., 2.33, 9.36, 999.); // check !!!!
// **
- AliMedium(0, "SPD Si$", 0, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(1, "SPD Si chip$", 1, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(2, "SPD Si bus$", 2, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(3, "SPD C$", 3, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(4, "SPD Air$", 4, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(5, "SPD Vacuum$", 5, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00);
- AliMedium(6, "SPD Al$", 6, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(7, "SPD Water $", 7, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(8, "SPD Freon$", 8, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(9, "SPD End ladder",9, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(10, "SPD cone$", 10, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(0, "SPD Si$", 0, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(1, "SPD Si chip$", 1, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(2, "SPD Si bus$", 2, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(3, "SPD C$", 3, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(4, "SPD Air$", 4, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(5, "SPD Vacuum$", 5, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00);
+ AliMedium(6, "SPD Al$", 6, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(7, "SPD Water $", 7, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(8, "SPD Freon$", 8, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(9, "SPD End ladder$",9, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(10, "SPD cone$", 10, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
// 225-249 --> Silicon Drift Detectors (detectors, chips, buses, cooling,..)
- AliMaterial(25, "SDD Si$", 28.0855, 14., 2.33, 9.36, 999);
- AliMaterial(26, "SDD Si chip$", 28.0855, 14., 2.33, 9.36, 999);
- AliMaterial(27, "SDD Si bus$", 28.0855, 14., 2.33, 9.36, 999);
- AliMaterial(28, "SDD C$", 12.011, 6., 2.265,18.8, 999);
+ AliMaterial(25, "SDD Si$", 28.0855, 14., 2.33, 9.36, 999.);
+ AliMaterial(26, "SDD Si chip$", 28.0855, 14., 2.33, 9.36, 999.);
+ AliMaterial(27, "SDD Si bus$", 28.0855, 14., 2.33, 9.36, 999.);
+ AliMaterial(28, "SDD C$", 12.011, 6., 2.265,18.8, 999.);
// v. dens
- AliMaterial(29, "SDD Air$", 14.61, 7.3, .001205, 30423., 999);
+ AliMaterial(29, "SDD Air$", 14.61, 7.3, .001205, 30423., 999.);
AliMaterial(30, "SDD Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16);
- AliMaterial(31, "SDD Al$", 26.981539, 13., 2.6989, 8.9, 999);
+ AliMaterial(31, "SDD Al$", 26.981539, 13., 2.6989, 8.9, 999.);
// After a call with ratios by number (negative number of elements),
// the ratio array is changed to the ratio by weight, so all successive
// calls with the same array must specify the number of elements as
// positive
AliMixture( 33, "SDD Freon$", afre, zfre, densfre, 2, wfre);
AliMixture( 34, "SDD PCB$", apcb, zpcb, denspcb, 3, wpcb);
- AliMaterial(35, "SDD Copper$", 63.546, 29., 8.96, 1.43, 999);
+ AliMaterial(35, "SDD Copper$", 63.546, 29., 8.96, 1.43, 999.);
AliMixture( 36, "SDD Ceramics$", acer, zcer, denscer, -5, wcer);
- AliMaterial(37, "SDD Kapton$", 12.011, 6., 1.3, 31.27, 999);
- AliMaterial(38, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999);
- AliMaterial(39, "SDD cone$", 63.546, 29., 1.15, 1.265, 999);
- //AliMaterial(38, "SDD End ladder$", 69.9298, 29.8246, -0.3824, -36.5103, 999);
- //AliMaterial(39, "SDD cone$", 63.546, 29., -1.15, -1.265, 999);
+ AliMaterial(37, "SDD Kapton$", 12.011, 6., 1.3, 31.27, 999.);
+ AliMaterial(38, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999.);
+ AliMaterial(39, "SDD cone$",63.546, 29., 1.15, 1.265, 999.);
+ AliMaterial(40, "SDD M55J$",12.3565, 6.4561, 1.8097, 22.9570, 999.);
+ //AliMaterial(38, "SDD End ladder$", 69.9298, 29.8246, -0.3824, -36.5103, 999.);
+ //AliMaterial(39, "SDD cone$",63.546, 29., -1.15, -1.265, 999.);
+
// **
// check A and Z
- AliMedium(25, "SDD Si$", 25, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(26, "SDD Si chip$", 26, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(27, "SDD Si bus$", 27, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(28, "SDD C$", 28, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(29, "SDD Air$", 29, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(30, "SDD Vacuum$", 30, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00);
- AliMedium(31, "SDD Al$", 31, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(32, "SDD Water $", 32, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(33, "SDD Freon$", 33, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(34, "SDD PCB$", 34, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(35, "SDD Copper$", 35, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(36, "SDD Ceramics$",36, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(37, "SDD Kapton$", 37, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(38, "SDD End ladder",38, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(39, "SDD cone$", 39, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
+ AliMedium(25, "SDD Si$", 25, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(26, "SDD Si chip$", 26, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(27, "SDD Si bus$", 27, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(28, "SDD C$", 28, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(29, "SDD Air$", 29, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(30, "SDD Vacuum$", 30, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00);
+ AliMedium(31, "SDD Al$", 31, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(32, "SDD Water $", 32, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(33, "SDD Freon$", 33, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(34, "SDD PCB$", 34, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(35, "SDD Copper$", 35, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(36, "SDD Ceramics$", 36, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(37, "SDD Kapton$", 37, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(38, "SDD End ladder$",38, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(39, "SDD cone$", 39, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(40, "SDD M55J$", 40, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
// 250-274 --> Silicon Strip Detectors (detectors, chips, buses, cooling,..)
AliMaterial(50, "SSD Si$", 28.0855, 14., 2.33, 9.36, 999.);
AliMaterial(52, "SSD Si bus$", 28.0855, 14., 2.33, 9.36, 999.);
AliMaterial(53, "SSD C$", 12.011, 6., 2.265,18.8, 999.);
// v. dens
- AliMaterial(54, "SSD Air$", 14.61, 7.3, .001205, 30423., 999);
+ AliMaterial(54, "SSD Air$", 14.61, 7.3, .001205, 30423., 999.);
AliMaterial(55, "SSD Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16);
- AliMaterial(56, "SSD Al$", 26.981539, 13., 2.6989, 8.9, 999);
+ AliMaterial(56, "SSD Al$", 26.981539, 13., 2.6989, 8.9, 999.);
// After a call with ratios by number (negative number of elements),
// the ratio array is changed to the ratio by weight, so all successive
// calls with the same array must specify the number of elements as
// the ratio array is changed to the ratio by weight, so all successive
// calls with the same array must specify the number of elements as
// positive
- AliMixture( 61, "SSD Ceramics$", acer, zcer, denscer, 5, wcer);
+ AliMixture(61, "SSD Ceramics$", acer, zcer, denscer, 5, wcer);
AliMaterial(62, "SSD Kapton$", 12.011, 6., 1.3, 31.27, 999.);
// check A and Z
AliMaterial(63, "SSD G10FR4$", 17.749, 8.875, 1.8, 21.822, 999.);
- AliMaterial(64, "SSD End ladder$", 32.0988, 15.4021, 0.68, 35.3238, 999);
- AliMaterial(65, "SSD cone$",63.546, 29., 1.15, 1.265, 999);
- //AliMaterial(64, "SSD End ladder$", 32.0988, 15.4021, -0.68, -35.3238, 999);
- //AliMaterial(65, "SSD cone$",63.546, 29., -1.15, -1.265, 999);
+ AliMaterial(64, "SSD End ladder$", 32.0988, 15.4021, 0.68, 35.3238, 999.);
+ AliMaterial(65, "SSD cone$",63.546, 29., 1.15, 1.265, 999.);
+ //AliMaterial(64, "SSD End ladder$", 32.0988, 15.4021, -0.68, -35.3238, 999.);
+ //AliMaterial(65, "SSD cone$",63.546, 29., -1.15, -1.265, 999.);
// **
- AliMedium(50, "SSD Si$", 50, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(51, "SSD Si chip$", 51, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(52, "SSD Si bus$", 52, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(53, "SSD C$", 53, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(54, "SSD Air$", 54, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(55, "SSD Vacuum$", 55, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00);
- AliMedium(56, "SSD Al$", 56, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(57, "SSD Water $", 57, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(58, "SSD Freon$", 58, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(59, "SSD PCB$", 59, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(60, "SSD Copper$", 60, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(61, "SSD Ceramics$",61, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(62, "SSD Kapton$", 62, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(63, "SSD G10FR4$", 63, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(64, "SPD End ladder",64, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(65, "SPD cone$", 65, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
+ AliMedium(50, "SSD Si$", 50, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(51, "SSD Si chip$", 51, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(52, "SSD Si bus$", 52, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(53, "SSD C$", 53, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(54, "SSD Air$", 54, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(55, "SSD Vacuum$", 55, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00);
+ AliMedium(56, "SSD Al$", 56, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(57, "SSD Water $", 57, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(58, "SSD Freon$", 58, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(59, "SSD PCB$", 59, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(60, "SSD Copper$", 60, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(61, "SSD Ceramics$", 61, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(62, "SSD Kapton$", 62, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(63, "SSD G10FR4$", 63, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(64, "SSD End ladder$",64, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(65, "SSD cone$", 65, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+
// 275-299 --> General (end-caps, frames, cooling, cables, etc.)
AliMaterial(75, "GEN C$", 12.011, 6., 2.265, 18.8, 999.);
// verify density
- AliMaterial(76, "GEN Air$", 14.61, 7.3, .001205, 30423., 999);
+ AliMaterial(76, "GEN Air$", 14.61, 7.3, .001205, 30423., 999.);
AliMaterial(77, "GEN Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16);
AliMixture( 78, "GEN POLYETHYL$", apoly, zpoly, .95, -2, wpoly);
AliMixture( 79, "GEN SERVICES$", aserv, zserv, 4.68, 4, wserv);
- AliMaterial(80, "GEN Copper$", 63.546, 29., 8.96, 1.43, 999.);
+ AliMaterial(80, "GEN Copper$", 63.546, 29., 8.96, 1.43, 999.);
// After a call with ratios by number (negative number of elements),
// the ratio array is changed to the ratio by weight, so all successive
// calls with the same array must specify the number of elements as
// positive
AliMixture(81, "GEN Water $", awat, zwat, denswat, 2, wwat);
- //AliMaterial(82, "GEN Cables$", 12.011, 6., 2.265, 18.8, 999.); // check !!!
- //AliMaterial(83, "GEN patch pan$", 12.011, 6., 2.265, 18.8, 999.); // check !!!
- //AliMaterial(84, "GEN serv$", 12.011, 6., 2.265, 18.8, 999.); // check !!!
+// AliMaterial(82, "GEN Cables$", 12.011, 6., 2.265, 18.8, 999.); // check !!!
+// AliMaterial(83, "GEN patch pan$", 12.011, 6., 2.265, 18.8, 999.); // check !!!
+// AliMaterial(84, "GEN serv$", 12.011, 6., 2.265, 18.8, 999.); // check !!!
AliMixture(85, "GEN Inox$", asteel, zsteel, 7.88, 4, wsteel);
- AliMaterial(86, "GEN Al$", 26.981539, 13., 2.6989, 8.9, 999);
+ AliMaterial(86, "GEN Al$", 26.981539, 13., 2.6989, 8.9, 999.);
+ AliMaterial(87,"inox/alum$", 32.1502,15.3383,3.0705,6.9197,999.);
// **
AliMedium(75,"GEN C$", 75, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(76,"GEN Air$", 76, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(79,"GEN SERVICES$", 79, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(80,"GEN Copper$", 80, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(81,"GEN Water $", 81, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- //AliMedium(82,"GEN Cables$", 82, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- //AliMedium(83,"GEN patch pan$",83, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- //AliMedium(84,"GEN serv$", 84, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+// AliMedium(82,"GEN Cables$", 82, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+// AliMedium(83,"GEN patch pan$",83, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+// AliMedium(84,"GEN serv$", 84, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(85,"GEN Inox$", 85, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(86, "GEN Al$", 86, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(87,"inox/alum$", 87, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
}
//_____________________________________________________________________________
////////////////////////////////////////////////////////////////////////
// Initialise the ITS after it has been created.
////////////////////////////////////////////////////////////////////////
+ Int_t i;
- //
+ cout << endl;
+ for(i=0;i<25;i++) cout << "*";cout << " ITSvPPRcoarsesymm_Init ";
+ for(i=0;i<25;i++) cout << "*";cout << endl;
+//
AliITS::Init();
- fMajorVersion = 1;
- fMinorVersion = 0;
+//
+ for(i=0;i<72;i++) cout << "*";
+ cout << endl;
+
}
//_____________________________________________________________________________
//
*/
}
-/*
-//____________________________________________________________________________
-void AliITSvPPRcoarsesymm::Streamer(TBuffer &R__b){
-////////////////////////////////////////////////////////////////////////
-// A dummy Streamer function for this class AliITSvPPRcoarsesymm. By default it
-// only streams the AliITS class as it is required. Since this class
-// dosen't contain any "real" data to be saved, it doesn't.
-////////////////////////////////////////////////////////////////////////
-
- if (R__b.IsReading()) {
- Version_t R__v = R__b.ReadVersion(); if (R__v) { }
- AliITS::Streamer(R__b);
- } else {
- R__b.WriteVersion(AliITSvPPRcoarsesymm::IsA());
- AliITS::Streamer(R__b);
- } // end if R__b.IsReading()
-}
-*/
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff