-/**************************************************************************
+ /**************************************************************************
* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
* *
* Author: The ALICE Off-line Project. *
* provided "as is" without express or implied warranty. *
**************************************************************************/
-/*
-$Log$
-Revision 1.15 2001/04/04 07:02:16 barbera
-Position of the cylinders holding rails corrected
-
-Revision 1.14 2001/03/29 22:02:30 barbera
-Some changes to the services due to the new drawings from the engineers.
-
-Revision 1.13 2001/03/29 05:28:56 barbera
-Rails material changed from aluminum to carbon fiber according with the decision of the last Technical Board
-
-Revision 1.12 2001/03/28 06:40:20 barbera
-Central and services mother volumes made consistenf for detailed and coarse geometry. Switch for rails added to the coarse geometries
-
-Revision 1.11 2001/03/23 00:12:23 nilsen
-Set Reading of AliITSgeom data from Geant3 common blocks as the default and
-not a .det file. Removed redundent calls to BuildGeometry.
-
-Revision 1.10 2001/03/15 13:47:55 barbera
-Some service mother volumes modified
-
-Revision 1.9 2001/03/13 18:13:30 barbera
-Some mother volumes sligthly modified to eliminate an overlap with the absorber
-
-Revision 1.8 2001/03/13 08:36:24 hristov
-fabsf replaced by TMath::Abs
-
-Revision 1.7 2001/03/13 00:43:43 barbera
-Updated version of the PPR detailed geometry with symmetric services. Of course, the central part of the detector (volume ITSD and its daughters) is the same of AliITSvPPRasymm.cxx
-
-Revision 1.6 2001/02/13 16:53:35 nilsen
-Fixed a but when trying to use GEANT4. Needed to replace
-if(!((TGeant3*)gMC)) with if(!(dynamic_casst<TGeant3*>(gMC)))
-because just casting gMC to be TGeant3* even when it realy is a TGeant3 pointer
-did not result in a zero value. For AliITSv5asymm and AliITSv5symm, needed
-to fix a bug in the initilizers and a bug in BuildGeometry. This is now done
-in the same way as in AliITSv5.cxx.
-
-Revision 1.5 2001/02/09 20:06:26 nilsen
-Fixed bug in distructor. Can't distroy fixxed length arrays. Thanks Peter.
-
-Revision 1.4 2001/02/09 00:05:31 nilsen
-Added fMajor/MinorVersion variables and made other changes to better make
-use of the new code changes in AliITSgeom related classes.
-
-Revision 1.3 2001/01/30 09:23:13 hristov
-Streamers removed (R.Brun)
-
-Revision 1.2 2001/01/26 20:01:19 hristov
-Major upgrade of AliRoot code
-
-Revision 1.1.2.1 2001/01/15 13:38:32 barbera
-New ITS detailed geometry to be used for the PPR
-
-Revision 1.12 2000/12/10 16:00:44 barbera
-Added last definition of special media like end-ladder boxes and cones
-
-Revision 1.11 2000/10/30 08:02:25 barbera
-PCON's changed into simpler CONS and TUBS. Services now allow for the rails to go through them.
-
-Revision 1.3.2.7 2000/10/27 17:20:00 barbera
-Position of rails w.r.t. the interaction point corrected.
-
-Revision 1.9 2000/10/27 13:31:29 barbera
-Rails between ITS and TPC added.
-
-Revision 1.8 2000/10/27 13:03:08 barbera
-Small changes in the SPD volumes and materials
-
-Revision 1.6 2000/10/16 14:45:37 barbera
-Mother volume ITSD modified to avoid some overlaps
-
-Revision 1.5 2000/10/16 13:49:15 barbera
-Services volumes slightly modified and material added following Pierluigi Barberis' information
-
-Revision 1.4 2000/10/07 15:33:07 barbera
-Small corrections to the ITSV mother volume
-
-Revision 1.3 2000/10/07 13:06:50 barbera
-Some new materials and media defined
-
-Revision 1.2 2000/10/07 10:42:43 barbera
-Mother volume ITSV corrected
-
-Revision 1.1 2000/10/06 23:09:12 barbera
-New geometry (symmetric services
-
-Revision 1.20 2000/10/02 21:28:08 fca
-Removal of useless dependecies via forward declarations
-
-Revision 1.19 2000/07/10 16:07:19 fca
-Release version of ITS code
-
-Revision 1.14.2.2 2000/05/19 10:09:21 nilsen
-fix for bug with HP and Sun unix + fix for event display in ITS-working branch
-
-Revision 1.14.2.1 2000/03/04 23:45:19 nilsen
-Fixed up the comments/documentation.
-
-Revision 1.14 1999/11/25 06:52:56 fca
-Correct value of drca
-
-Revision 1.13.2.1 1999/11/25 06:52:21 fca
-Correct value of drca
-
-Revision 1.13 1999/10/27 11:16:26 fca
-Correction of problem in geometry
-
-Revision 1.12 1999/10/22 08:25:25 fca
-remove double definition of destructors
-
-Revision 1.11 1999/10/22 08:16:49 fca
-Correct destructors, thanks to I.Hrivnacova
-
-Revision 1.10 1999/10/06 19:56:50 fca
-Add destructor
-
-Revision 1.9 1999/10/05 08:05:09 fca
-Minor corrections for uninitialised variables.
-
-Revision 1.8 1999/09/29 09:24:20 fca
-Introduction of the Copyright and cvs Log
-
-*/
+/* $Id$ */
//////////////////////////////////////////////////////////////////////////////
// //
// //
//////////////////////////////////////////////////////////////////////////////
// See AliITSvPPRsymm::StepManager().
-#include <iostream.h>
-#include <iomanip.h>
+#include <Riostream.h>
#include <stdio.h>
#include <stdlib.h>
-#include <TMath.h>
+
+#include <TBRIK.h>
+#include <TCanvas.h>
+#include <TClonesArray.h>
+#include <TFile.h> // only required for Tracking function?
#include <TGeometry.h>
+#include <TLorentzVector.h>
+#include <TMath.h>
#include <TNode.h>
-#include <TTUBE.h>
-#include <TFile.h> // only required for Tracking function?
-#include <TCanvas.h>
#include <TObjArray.h>
-#include <TLorentzVector.h>
#include <TObjString.h>
-#include <TClonesArray.h>
-#include <TBRIK.h>
+#include <TPCON.h>
#include <TSystem.h>
+#include <TTUBE.h>
+#include <TTUBS.h>
+#include <TVirtualMC.h>
-#include "AliMC.h"
#include "AliRun.h"
#include "AliMagF.h"
#include "AliConst.h"
-#include "../TGeant3/TGeant3.h"
#include "AliITSGeant3Geometry.h"
-#include "AliITShit.h"
-#include "AliITS.h"
-#include "AliITSvPPRsymm.h"
#include "AliITSgeom.h"
-#include "AliITSgeomSPD.h"
#include "AliITSgeomSDD.h"
+#include "AliITSgeomSPD.h"
#include "AliITSgeomSSD.h"
-
+#include "AliITShit.h"
+#include "AliITSresponseSDD.h"
+#include "AliITSresponseSPD.h"
+#include "AliITSresponseSSD.h"
+#include "AliITSsegmentationSDD.h"
+#include "AliITSsegmentationSPD.h"
+#include "AliITSsegmentationSSD.h"
+#include "AliITSsimulationSDD.h"
+#include "AliITSsimulationSPD.h"
+#include "AliITSsimulationSSD.h"
+#include "AliITSvPPRsymm.h"
+#include "AliMagF.h"
+#include "AliRun.h"
ClassImp(AliITSvPPRsymm)
//_____________________________________________________________________________
-AliITSvPPRsymm::AliITSvPPRsymm() {
+AliITSvPPRsymm::AliITSvPPRsymm() : AliITSvPPRasymm() {
////////////////////////////////////////////////////////////////////////
// Standard default constructor for the ITS version 9.
////////////////////////////////////////////////////////////////////////
- Int_t i;
-
- fIdN = 0;
- fIdName = 0;
- fIdSens = 0;
- fEuclidOut = kFALSE; // Don't write Euclide file
- fGeomDetOut = kFALSE; // Don't write .det file
- fGeomDetIn = kFALSE; // Don't Read .det file
- fMajorVersion = IsVersion();
- fMinorVersion = -1;
- for(i=0;i<60;i++) fRead[i] = '\0';
- for(i=0;i<60;i++) fWrite[i] = '\0';
- for(i=0;i<60;i++) fEuclidGeomDet[i] = '\0';
}
//_____________________________________________________________________________
-AliITSvPPRsymm::AliITSvPPRsymm(const char *name, const char *title) : AliITS(name, title){
+AliITSvPPRsymm::AliITSvPPRsymm(const char *name, const char *title) : AliITSvPPRasymm(name, title){
////////////////////////////////////////////////////////////////////////
// Standard constructor for the ITS version 9.
////////////////////////////////////////////////////////////////////////
- Int_t i;
-
- fIdN = 6;
- fIdName = new TString[fIdN];
- fIdName[0] = "ITS1";
- fIdName[1] = "ITS2";
- fIdName[2] = "ITS3";
- fIdName[3] = "ITS4";
- fIdName[4] = "ITS5";
- fIdName[5] = "ITS6";
- fIdSens = new Int_t[fIdN];
- for (i=0;i<fIdN;i++) fIdSens[i] = 0;
- fMajorVersion = IsVersion();
- fMinorVersion = 2;
- fEuclidOut = kFALSE; // Don't write Euclide file
- fGeomDetOut = kFALSE; // Don't write .det file
- fGeomDetIn = kFALSE; // Don't Read .det file
- SetThicknessDet1();
- SetThicknessDet2();
- SetThicknessChip1();
- SetThicknessChip2();
-
- fEuclidGeometry="$ALICE_ROOT/ITS/ITSgeometry_vPPRsymm2.euc";
- strncpy(fEuclidGeomDet,"$ALICE_ROOT/ITS/ITSgeometry_vPPRsymm2.det",60);
- strncpy(fRead,fEuclidGeomDet,60);
- strncpy(fWrite,fEuclidGeomDet,60);
-
-}
-//____________________________________________________________________________
-AliITSvPPRsymm::AliITSvPPRsymm(const AliITSvPPRsymm &source){
-////////////////////////////////////////////////////////////////////////
-// Copy Constructor for ITS version 9.
-////////////////////////////////////////////////////////////////////////
- if(&source == this) return;
- Warning("Copy Constructor","Not allowed to copy AliITSvPPRsymm");
- return;
-}
-//_____________________________________________________________________________
-AliITSvPPRsymm& AliITSvPPRsymm::operator=(const AliITSvPPRsymm &source){
-////////////////////////////////////////////////////////////////////////
-// Assignment operator for the ITS version 9.
-////////////////////////////////////////////////////////////////////////
- if(&source == this) return *this;
- Warning("= operator","Not allowed to copy AliITSvPPRsymm");
- return *this;
}
//_____________________________________________________________________________
AliITSvPPRsymm::~AliITSvPPRsymm() {
// Standard destructor for the ITS version 9.
////////////////////////////////////////////////////////////////////////
}
-//__________________________________________________________________________
-void AliITSvPPRsymm::BuildGeometry(){
-////////////////////////////////////////////////////////////////////////
-// Geometry builder for the ITS version 9.
-////////////////////////////////////////////////////////////////////////
- TNode *node, *top;
- const int kColorITS=kYellow;
- //
- top = gAlice->GetGeometry()->GetNode("alice");
-
- new TTUBE("S_layer1","Layer1 of ITS","void",3.95,3.95+0.05475,12.25);
- top->cd();
- node = new TNode("Layer1","Layer1","S_layer1",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer2","Layer2 of ITS","void",7.,7.+0.05475,16.3);
- top->cd();
- node = new TNode("Layer2","Layer2","S_layer2",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer3","Layer3 of ITS","void",15.,15.+0.05288,21.1);
- top->cd();
- node = new TNode("Layer3","Layer3","S_layer3",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer4","Layer4 of ITS","void",24,24+0.05288,29.6);
- top->cd();
- node = new TNode("Layer4","Layer4","S_layer4",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer5","Layer5 of ITS","void",40,40+0.05382,45.1);
- top->cd();
- node = new TNode("Layer5","Layer5","S_layer5",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer6","Layer6 of ITS","void",45,45+0.05382,50.4);
- top->cd();
- node = new TNode("Layer6","Layer6","S_layer6",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-}
//_____________________________________________________________________________
void AliITSvPPRsymm::CreateGeometry(){
////////////////////////////////////////////////////////////////////////
Float_t di1d3[3], di20a[3], di1d2[3]; // for layer 2
Float_t di108[3], di104[3]; // for both layers
- Float_t ddet1=300.; // total detector thickness on layer 1 (micron)
- Float_t dchip1=300.; // total chip thickness on layer 1 (micron)
+ Float_t ddet1=200.; // total detector thickness on layer 1 (micron)
+ Float_t dchip1=200.; // total chip thickness on layer 1 (micron)
- Float_t ddet2=300.; // total detector thickness on layer 2 (micron)
- Float_t dchip2=300.; // total chip thickness on layer 2 (micron)
+ Float_t ddet2=200.; // total detector thickness on layer 2 (micron)
+ Float_t dchip2=200.; // total chip thickness on layer 2 (micron)
- Float_t dbus=200.; // total bus thickness on both layers (micron)
+ Float_t dbus=300.; // total bus thickness on both layers (micron)
ddet1 = GetThicknessDet1();
ddet2 = GetThicknessDet2();
dchip2 = GetThicknessChip2();
if(ddet1 < 100. || ddet1 > 300.) {
- cout << "WARNING: the detector thickness for layer 1 is outside the range of [100,300] microns."
- " The default value of 300 microns will be used." << endl;
- ddet1=300.;
+ cout << "ITS - WARNING: the detector thickness for layer 1 is outside the range of [100,300] microns."
+ " The default value of 200 microns will be used." << endl;
+ ddet1=200.;
}
if(ddet2 < 100. || ddet2 > 300.) {
- cout << "WARNING: the detector thickness for layer 2 is outside the range of [100,300] microns."
- " The default value of 300 microns will be used." << endl;
- ddet2=300.;
+ cout << "ITS - WARNING: the detector thickness for layer 2 is outside the range of [100,300] microns."
+ " The default value of 200 microns will be used." << endl;
+ ddet2=200.;
}
- if(dchip1 < 150. || dchip1 > 300.) {
- cout << "WARNING: the chip thickness for layer 1 is outside the range of [150,300] microns."
- " The default value of 300 microns will be used." << endl;
- dchip1=300.;
+ if(dchip1 < 100. || dchip1 > 300.) {
+ cout << "ITS - WARNING: the chip thickness for layer 1 is outside the range of [100,300] microns."
+ " The default value of 200 microns will be used." << endl;
+ dchip1=200.;
}
- if(dchip2 < 150. || dchip2 > 300.) {
- cout << "WARNING: the chip thickness for layer 2 is outside the range of [150,300] microns."
- " The default value of 300 microns will be used." << endl;
- dchip2=300.;
+ if(dchip2 < 100. || dchip2 > 300.) {
+ cout << "ITS - WARNING: the chip thickness for layer 2 is outside the range of [100,300] microns."
+ " The default value of 200 microns will be used." << endl;
+ dchip2=200.;
}
Int_t rails = 1; // flag for rails (1 --> rails in; 0 --> rails out)
fluid = GetCoolingFluid();
if(rails != 0 && rails != 1) {
- cout << "WARNING: the switch for rails is not set neither to 0 (rails out) nor to 1 (rails in)."
+ cout << "ITS - WARNING: the switch for rails is not set neither to 0 (rails out) nor to 1 (rails in)."
" The default value of 1 (rails in) will be used." << endl;
}
if(fluid != 0 && fluid != 1) {
- cout << "WARNING: the switch for cooling fluid is not set neither to 0 (freon) nor to 1 (water)."
+ cout << "ITS - WARNING: the switch for cooling fluid is not set neither to 0 (freon) nor to 1 (water)."
" The default value of 1 (water) will be used." << endl;
}
- cout << "Detector thickness on layer 1 is set to " << ddet1 << " microns." << endl;
- cout << "Chip thickness on layer 1 is set to " << dchip1 << " microns." << endl;
- cout << "Detector thickness on layer 2 is set to " << ddet2 << " microns." << endl;
- cout << "Chip thickness on layer 2 is set to " << dchip2 << " microns." << endl;
+ cout << "ITS: Detector thickness on layer 1 is set to " << ddet1 << " microns." << endl;
+ cout << "ITS: Chip thickness on layer 1 is set to " << dchip1 << " microns." << endl;
+ cout << "ITS: Detector thickness on layer 2 is set to " << ddet2 << " microns." << endl;
+ cout << "ITS: Chip thickness on layer 2 is set to " << dchip2 << " microns." << endl;
if(rails == 0 ) {
- cout << "Rails are out." << endl;
+ cout << "ITS: Rails are out." << endl;
} else {
- cout << "Rails are in." << endl;
+ cout << "ITS: Rails are in." << endl;
}
if(fluid == 0 ) {
- cout << "The cooling fluid is freon." << endl;
+ cout << "ITS: The cooling fluid is freon." << endl;
} else {
- cout << "The cooling fluid is water." << endl;
+ cout << "ITS: The cooling fluid is water." << endl;
}
ddet1 = ddet1*0.0001/2.; // conversion from tot length in um to half in cm
Float_t deltax, deltay;
- Int_t thickness = fMinorVersion/10;
- Int_t option = fMinorVersion - 10*thickness;
+ Int_t thickness = GetMinorVersion()/10;
+ Int_t option = GetMinorVersion() - 10*thickness;
// Define some variables for SDD
AliMatrix(idrotm[234],90.0,71.9991,90.0,161.9991,0.0,0.0);
AliMatrix(idrotm[235],90.0,270.0,90.0,0.0,0.0,0.0);
AliMatrix(idrotm[236],90.0,180.013702,90.0,270.013702,0.0,0.0);
- AliMatrix(idrotm[237],90.0,0.0,90.0,90.0,180.0,0.0);
+ AliMatrix(idrotm[237],90.0,180.0,90.0,90.0,0.0,0.0);
AliMatrix(idrotm[238],90.0,144.0,90.0,234.0,0.0,0.0);
AliMatrix(idrotm[239],90.0,216.0,90.0,306.0,0.0,0.0);
AliMatrix(idrotm[240],90.0,288.0,90.0,18.0,0.0,0.0);
AliMatrix(idrotm[241],90.0,324.0,90.0,54.0,0.0,0.0);
AliMatrix(idrotm[242],90.0,36.0,90.0,126.0,0.0,0.0);
AliMatrix(idrotm[243],90.0,108.0,90.0,198.0,0.0,0.0);
- AliMatrix(idrotm[244],90.0,0.0,90.0,270.0,180.0,0.0);
- AliMatrix(idrotm[245],90.0,342.0,90.0,252.0,180.0,0.0);
- AliMatrix(idrotm[246],90.0,130.0,90.0,40.0,180.0,0.0);
- AliMatrix(idrotm[247],90.0,139.0,90.0,49.0,180.0,0.0);
- AliMatrix(idrotm[248],90.0,148.0,90.0,58.0,180.0,0.0);
- AliMatrix(idrotm[249],90.0,157.0,90.0,67.0,180.0,0.0);
+ AliMatrix(idrotm[244],90.0,180.0,90.0,270.0,0.0,0.0);
+ AliMatrix(idrotm[245],90.0,162.0,90.0,252.0,0.0,0.0);
+ AliMatrix(idrotm[246],90.0,310.0,90.0,40.0,0.0,0.0);
+ AliMatrix(idrotm[247],90.0,319.0,90.0,49.0,0.0,0.0);
+ AliMatrix(idrotm[248],90.0,328.0,90.0,58.0,0.0,0.0);
+ AliMatrix(idrotm[249],90.0,337.0,90.0,67.0,0.0,0.0);
AliMatrix(idrotm[1003],90.0,73.5,90.0,163.5,0.0,0.0);
AliMatrix(idrotm[1011],90.0,342.0,90.0,72.0,0.0,0.0);
AliMatrix(idrotm[1039],90.0,72.0,90.0,162.0,0.0,0.0);
if (option == 2) {
- AliMatrix(idrotm[201],90.0,0.0,90.0,90.0,180.0,0.0);
+ AliMatrix(idrotm[201],90.0,0.0,90.0,90.0,0.0,0.0);
AliMatrix(idrotm[202],90.0,90.0,90.0,0.0,0.0,0.0);
AliMatrix(idrotm[203],90.0,350.0,90.0,260.0,0.0,0.0);
AliMatrix(idrotm[204],90.0,170.0,90.0,80.0,0.0,0.0);
AliMatrix(idrotm[235],90.0,270.0,90.0,0.0,0.0,0.0);
AliMatrix(idrotm[236],90.0,180.013702,90.0,270.013702,0.0,0.0);
AliMatrix(idrotm[237],90.0,90.0,90.0,180.0,0.0,0.0);
- AliMatrix(idrotm[238],90.0,0.0,90.0,270.0,180.0,0.0);
- AliMatrix(idrotm[239],90.0,342.0,90.0,252.0,180.0,0.0);
- AliMatrix(idrotm[240],90.0,130.0,90.0,40.0,180.0,0.0);
- AliMatrix(idrotm[241],90.0,139.0,90.0,49.0,180.0,0.0);
- AliMatrix(idrotm[242],90.0,148.0,90.0,58.0,180.0,0.0);
- AliMatrix(idrotm[243],90.0,157.0,90.0,67.0,180.0,0.0);
+ AliMatrix(idrotm[238],90.0,180.0,90.0,270.0,0.0,0.0);
+ AliMatrix(idrotm[239],90.0,162.0,90.0,252.0,0.0,0.0);
+ AliMatrix(idrotm[240],90.0,310.0,90.0,40.0,0.0,0.0);
+ AliMatrix(idrotm[241],90.0,319.0,90.0,49.0,0.0,0.0);
+ AliMatrix(idrotm[242],90.0,328.0,90.0,58.0,0.0,0.0);
+ AliMatrix(idrotm[243],90.0,337.0,90.0,67.0,0.0,0.0);
AliMatrix(idrotm[244],90.0,216.0,90.0,306.0,0.0,0.0);
AliMatrix(idrotm[245],90.0,36.0,90.0,126.0,0.0,0.0);
AliMatrix(idrotm[246],90.0,108.0,90.0,198.0,0.0,0.0);
// FIELD CAGE HALF LENGTH
- rlim = 56.;
+ rlim = 50.;
zmax = 74.;
ztpc = 284.;
dgh[11] = 62+4.;
dgh[12] = -97.5;
dgh[13] = 46;
- dgh[14] = rlim+0.1;
+ dgh[14] = rlim+6;
dgh[15] = -zmax;
dgh[16] = 46;
- dgh[17] = rlim+0.1;
+ dgh[17] = rlim+6;
dgh[18] = -48;
dgh[19] = 6;
- dgh[20] = rlim+0.1;
+ dgh[20] = rlim+6;
dgh[21] = -28.6;
dgh[22] = 6;
- dgh[23] = rlim+0.1;
+ dgh[23] = rlim+6;
dgh[24] = -27.6;
dgh[25] = 3.295;
- dgh[26] = rlim+0.1;
+ dgh[26] = rlim+6;
dgh[27] = 27.6;
dgh[28] = 3.295;
- dgh[29] = rlim+0.1;
+ dgh[29] = rlim+6;
dgh[30] = 28.6;
dgh[31] = 6;
- dgh[32] = rlim+0.1;
+ dgh[32] = rlim+6;
dgh[33] = 48;
dgh[34] = 6;
- dgh[35] = rlim+0.1;
+ dgh[35] = rlim+6;
dgh[36] = zmax;
dgh[37] = 46;
- dgh[38] = rlim+0.1;
+ dgh[38] = rlim+6;
dgh[39] = 97.5;
dgh[40] = 46;
- dgh[41] = rlim+0.1;
+ dgh[41] = rlim+6;
dgh[42] = ztpc;
dgh[43] = 62;
dgh[44] = 62+4.;
gMC->Gspos("I126",2,"I12A",-0.7799,7.2874,0.0,idrotm[217],"ONLY");
gMC->Gspos("I125",2,"I12A",-0.6315,7.0883,0.0,idrotm[216],"ONLY");
gMC->Gspos("I124",2,"I12A",-0.4965,6.8742,0.0,idrotm[215],"ONLY");
- gMC->Gspos("I103",3,"I10A",-0.05,-di10a[1]+2.*di104[1]+di103[1],-3.536,idrotm[237],"ONLY");
- gMC->Gspos("I103",4,"I10A",-0.05,-di10a[1]+2.*di104[1]+di103[1],-10.708,idrotm[237],"ONLY");
+ gMC->Gspos("I103",3,"I10A",-0.05,-di10a[1]+2.*di104[1]+di103[1],-3.536,0,"ONLY");
+ gMC->Gspos("I103",4,"I10A",-0.05,-di10a[1]+2.*di104[1]+di103[1],-10.708,0,"ONLY");
gMC->Gspos("I103",1,"I10A",-0.05,-di10a[1]+2.*di104[1]+di103[1],10.708,0,"ONLY");
gMC->Gspos("I103",2,"I10A",-0.05,-di10a[1]+2.*di104[1]+di103[1],3.536,0,"ONLY");
gMC->Gspos("I105",1,"I10A",-0.05,0.01,-16.844,idrotm[237],"ONLY");
gMC->Gspos("I105",2,"I10A",-0.05,0.01,16.844,0,"ONLY");
gMC->Gspos("I104",1,"I10A",0.0,-di10a[1]+di104[1],0.0,0,"ONLY");
- gMC->Gspos("I1D3",3,"I20A",-0.05,-di20a[1]+2.*di104[1]+di1d3[1],-3.536,idrotm[237],"ONLY");
- gMC->Gspos("I1D3",4,"I20A",-0.05,-di20a[1]+2.*di104[1]+di1d3[1],-10.708,idrotm[237],"ONLY");
+ gMC->Gspos("I1D3",3,"I20A",-0.05,-di20a[1]+2.*di104[1]+di1d3[1],-3.536,0,"ONLY");
+ gMC->Gspos("I1D3",4,"I20A",-0.05,-di20a[1]+2.*di104[1]+di1d3[1],-10.708,0,"ONLY");
gMC->Gspos("I1D3",1,"I20A",-0.05,-di20a[1]+2.*di104[1]+di1d3[1],10.708,0,"ONLY");
gMC->Gspos("I1D3",2,"I20A",-0.05,-di20a[1]+2.*di104[1]+di1d3[1],3.536,0,"ONLY");
gMC->Gspos("I105",3,"I20A",-0.05,0.01,-16.844,idrotm[237],"ONLY");
gMC->Gspos("I105",4,"I10B",-0.05,-0.01,16.844,0,"ONLY");
gMC->Gspos("I107",2,"I10B",-0.0455,-di10b[1]+di107[1],3.536,0,"ONLY");
gMC->Gspos("I107",1,"I10B",-0.0455,-di10b[1]+di107[1],10.708,0,"ONLY");
- gMC->Gspos("I107",4,"I10B",-0.0455,-di10b[1]+di107[1],-10.708,idrotm[201],"ONLY");
- gMC->Gspos("I107",3,"I10B",-0.0455,-di10b[1]+di107[1],-3.536,idrotm[201],"ONLY");
+ gMC->Gspos("I107",4,"I10B",-0.0455,-di10b[1]+di107[1],-10.708,0,"ONLY");
+ gMC->Gspos("I107",3,"I10B",-0.0455,-di10b[1]+di107[1],-3.536,0,"ONLY");
gMC->Gspos("I109",1,"I10B",-0.138,0.015,-16.844,idrotm[201],"ONLY");
gMC->Gspos("I109",2,"I10B",-0.138,0.015,16.844,0,"ONLY");
gMC->Gspos("I108",1,"I10B",-0.138,-di10b[1]+2.*di107[1]+di108[1],0.0,0,"ONLY");
gMC->Gspos("I570",34,"IT56",21.7497,40.1899,-0.27,idrotm[549],"ONLY");
gMC->Gspos("I570",35,"IT56",14.7884,43.0772,-0.27,idrotm[550],"ONLY");
gMC->Gspos("I570",36,"IT56",7.5216,45.0744,-0.27,idrotm[551],"ONLY");
- gMC->Gspos("I570",37,"IT56",-0.27,45.545,-0.27,0,"ONLY");
+ gMC->Gspos("I570",37,"IT56",0.,45.545,-0.27,0,"ONLY");
gMC->Gspos("I570",38,"IT56",-7.5216,45.0744,-0.27,idrotm[552],"ONLY");
gMC->Gspos("I570",1,"IT56",-14.7884,43.0772,-0.27,idrotm[553],"ONLY");
gMC->Gspos("I570",2,"IT56",-21.7497,40.1899,-0.27,idrotm[620],"ONLY");
// --- Place volumes of cylinders between SPD and SDD and SDD and SSD
- gMC->Gspos("ICY1",1,"ITSD",0.0,0.0,0.,0,"ONLY");
- gMC->Gspos("ICY2",1,"ITSD",0.0,0.0,0.,0,"ONLY");
+ gMC->Gspos("ICY1",1,"IS02",0.0,0.0,0.,0,"ONLY");
+ gMC->Gspos("ICY2",1,"IS01",0.0,0.0,0.,0,"ONLY");
// --- Place volumes of SDD cone ----------------------------------
dgh[1] = 3.;
dgh[2] = 5.; // 5. comes from the fact that the volume has to be 567.6/2 cm^3
gMC->Gsvolu("ISR1", "TUBE", idtmed[284], dgh, 3);
- gMC->Gspos("ISR1", 1, "ALIC", 54.9, 11., 79.5, 0, "ONLY");
- gMC->Gspos("ISR1", 2, "ALIC", 54.9, -11., 79.5, 0, "ONLY");
- gMC->Gspos("ISR1", 3, "ALIC", -54.9, 11., 79.5, 0, "ONLY");
- gMC->Gspos("ISR1", 4, "ALIC", -54.9, -11., 79.5, 0, "ONLY");
- gMC->Gspos("ISR1", 5, "ALIC", 54.9, 11., -79.5, 0, "ONLY");
- gMC->Gspos("ISR1", 6, "ALIC", 54.9, -11., -79.5, 0, "ONLY");
- gMC->Gspos("ISR1", 7, "ALIC", -54.9, 11., -79.5, 0, "ONLY");
- gMC->Gspos("ISR1", 8, "ALIC", -54.9, -11., -79.5, 0, "ONLY");
+ gMC->Gspos("ISR1", 1, "ITSV", 53.4292, 10.7053, 79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 2, "ITSV", 53.4292, -10.7053, 79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 3, "ITSV", -53.4292, 10.7053, 79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 4, "ITSV", -53.4292, -10.7053, 79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 5, "ITSV", 53.4292, 10.7053, -79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 6, "ITSV", 53.4292, -10.7053, -79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 7, "ITSV", -53.4292, 10.7053, -79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 8, "ITSV", -53.4292, -10.7053, -79.75, 0, "ONLY");
// --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE ABSORBER
// --- Outputs the geometry tree in the EUCLID/CAD format
- if (fEuclidOut) {
+ if (GetEUCLID()) {
gMC->WriteEuclid("ITSgeometry", "ITSV", 1, 5);
}
}
-//_____________________________________________________________________________
-void AliITSvPPRsymm::CreateMaterials(){
-////////////////////////////////////////////////////////////////////////
- //
- // Create ITS materials
- // This function defines the default materials used in the Geant
- // Monte Carlo simulations for the geometries AliITSv1, AliITSv3,
- // AliITSvPPRsymm.
- // In general it is automatically replaced by
- // the CreatMaterials routine defined in AliITSv?. Should the function
- // CreateMaterials not exist for the geometry version you are using this
- // one is used. See the definition found in AliITSv5 or the other routine
- // for a complete definition.
- //
-
- Int_t isxfld = gAlice->Field()->Integ();
- Float_t sxmgmx = gAlice->Field()->Max();
-
- // Freon
- Float_t afre[2] = { 12.011,18.9984032 };
- Float_t zfre[2] = { 6.,9. };
- Float_t wfre[2] = { 5.,12. };
- Float_t densfre = 1.5;
-
- // --- Define the various materials and media for GEANT ---
-
- AliMaterial(1,"SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(1,"SI$",1,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(2,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(2,"SPD SI CHIP$",2,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01, 0);
-
- AliMaterial(3,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(3,"SPD SI BUS$",3,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(4,"C (M55J)$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
- AliMedium(4,"C (M55J)$",4,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(5,"AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
- AliMedium(5,"AIR$",5,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E-02,.10000E+01,0);
-
- AliMaterial(6,"GEN AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
- AliMedium(6,"GEN AIR$",6,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E-02,.10000E+01,0);
-
- AliMaterial(7,"SDD SI CHIP$",0.374952E+02,0.178184E+02,0.24485E+01,0.76931E+01,0.99900E+03);
- AliMedium(7,"SDD SI CHIP$",7,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(9,"SDD C (M55J)$",0.123565E+02,0.64561E+01,0.18097E+01,0.229570E+02,0.99900E+03);
- AliMedium(9,"SDD C (M55J)$",9,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(10,"SDD AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
- AliMedium(10,"SDD AIR$",10,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E-02,.10000E+01,0);
-
- AliMaterial(11,"AL$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
- AliMedium(11,"AL$",11,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(12,"WATER$",0.14322E+02,0.72167E+01,0.10000E+01,0.35759E+02,0.94951E+02);
- AliMedium(12,"WATER$",12,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMixture(13,"Freon$",afre,zfre,densfre,-2,wfre);
- AliMedium(13,"Freon$",13,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(14,"COPPER$",0.63546E+02,0.29000E+02,0.89600E+01,0.14300E+01,0.99900E+03);
- AliMedium(14,"COPPER$",14,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(15,"CERAMICS$",0.22314E+02,0.10856E+02,0.36000E+01,0.76200E+01,0.31901E+02);
- AliMedium(15,"CERAMICS$",15,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(20,"SSD C (M55J)$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
- AliMedium(20,"SSD C (M55J)$",20,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(21,"SSD AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
- AliMedium(21,"SSD AIR$",21,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E-02,.10000E+01,0);
-
- AliMaterial(25,"G10FR4$",0.17749E+02,0.88750E+01,0.18000E+01,0.21822E+02,0.99900E+03);
- AliMedium(25,"G10FR4$",25,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(26,"GEN C (M55J)$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
- AliMedium(26,"GEN C (M55J)$",26,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(27,"GEN Air$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
- AliMedium(27,"GEN Air$",27,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E-02,.10000E+01,0);
-
- AliMaterial(51,"SPD SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(51,"SPD SI$",51,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(52,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(52,"SPD SI CHIP$",52,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(53,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(53,"SPD SI BUS$",53,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(54,"SPD C (M55J)$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
- AliMedium(54,"SPD C (M55J)$",54,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(55,"SPD AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
- AliMedium(55,"SPD AIR$",55,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E-02,.10000E+01,0);
-
- AliMaterial(56,"SPD KAPTON(POLYCH2)$",0.14000E+02,0.71770E+01,0.13000E+01,0.31270E+02,0.99900E+03);
- AliMedium(56,"SPD KAPTON(POLYCH2)$",56,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(61,"EPOXY$",0.17749E+02,0.88750E+01,0.18000E+01,0.21822E+02,0.99900E+03);
- AliMedium(61,"EPOXY$",61,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(62,"SILICON$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(62,"SILICON$",62,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(63,"KAPTONH(POLYCH2)$",0.14000E+02,0.71770E+01,0.13000E+01,0.31270E+02,0.99900E+03);
- AliMedium(63,"KAPTONH(POLYCH2)$",63,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(64,"ALUMINUM$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
- AliMedium(64,"ALUMINUM$",64,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(65,"INOX$",0.55098E+02,0.2572E+02,0.7900E+01,0.17800E+01,0.99900E+03);
- AliMedium(65,"INOX$",65,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(68,"ROHACELL$",0.123974E+02,0.62363E+01,0.500E-01,0.80986E+03,0.99900E+03);
- AliMedium(68,"ROHACELL$",68,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(69,"SDD C AL (M55J)$",0.138802E+02,0.71315E+01,0.19837E+01,0.176542E+02,0.99900E+03);
- AliMedium(69,"SDD C AL (M55J)$",69,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(70,"SDDKAPTON (POLYCH2)$",0.14000E+02,0.71770E+01,0.13000E+01,0.31270E+02,0.99900E+03);
- AliMedium(70,"SDDKAPTON (POLYCH2)$",70,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(71,"ITS SANDW A$",0.12011E+02,0.60000E+01,0.2115E+00,0.17479E+03,0.99900E+03);
- AliMedium(71,"ITS SANDW A$",71,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(72,"ITS SANDW B$",0.12011E+02,0.60000E+01,0.27000E+00,0.18956E+03,0.99900E+03);
- AliMedium(72,"ITS SANDW B$",72,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(73,"ITS SANDW C$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
- AliMedium(73,"ITS SANDW C$",73,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(74,"HEAT COND GLUE$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
- AliMedium(74,"HEAT COND GLUE$",74,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(75,"ELASTO SIL$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(75,"ELASTO SIL$",75,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(76,"SPDBUS(AL+KPT+EPOX)$",0.19509E+02,0.96502E+01,0.19060E+01,0.15413E+02,0.99900E+03);
- AliMedium(76,"SPDBUS(AL+KPT+EPOX)$",76,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(77,"SDD X7R capacitors$",0.1157516E+03,0.477056E+02,0.67200E+01,0.14236E+01,0.99900E+03);
- AliMedium(77,"SDD X7R capacitors$",77,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(78,"SDD ruby sph. Al2O3$",0.218101E+02,0.106467E+02,0.39700E+01,0.48539E+01,0.99900E+03);
- AliMedium(78,"SDD ruby sph. Al2O3$",78,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(79,"SDD SI insensitive$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(79,"SDD SI insensitive$",79,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(80,"SDD HV microcable$",0.159379E+02,0.78598E+01,0.16087E+01,0.217906E+02,0.99900E+03);
- AliMedium(80,"SDD HV microcable$",80,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(81,"SDD LV+signal cable$",0.223689E+02,0.108531+02,0.21035E+01,0.13440E+02,0.99900E+03);
- AliMedium(81,"SDD LV+signal cable$",81,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(82,"SDD hybrid microcab$",0.218254E+02,0.106001E+02,0.20502E+01,0.137308E+02,0.99900E+03);
- AliMedium(82,"SDD hybrid microcab$",82,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(83,"SDD anode microcab$",0.186438E+02,0.91193E+01,0.17854E+01,0.176451E+02,0.99900E+03);
- AliMedium(83,"SDD anode microcab$",83,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(84,"SDD/SSD rings$",0.123565E+02,0.64561E+01,0.18097E+01,0.229570E+02,0.99900E+03);
- AliMedium(84,"SDD/SSD rings$",84,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(85,"inox/alum$",0.321502E+02,0.153383E+02,0.30705E+01,0.69197E+01,0.99900E+03);
- AliMedium(85,"inox/alum$",85,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
-
- // Special media
-
- AliMaterial(90,"SPD shield$", 12.011, 6., 1.93/10. , 22.1*10., 999);
- AliMedium(90,"SPD shield$",90, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
- AliMaterial(91, "SPD End ladder$", 47.0447, 21.7963, 3.6374, 4.4711, 999);
- AliMedium(91, "SPD End ladder$",91, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
- AliMaterial(92, "SPD cone$",28.0855, 14., 2.33, 9.36, 999);
- AliMedium(92, "SPD cone$", 92, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
- AliMaterial(93, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999);
- AliMedium(93, "SDD End ladder$",93, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
- AliMaterial(94, "SDD cone$",63.546, 29., 1.15, 1.265, 999);
- AliMedium(94, "SDD cone$", 94, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
- AliMaterial(95, "SSD End ladder$", 32.0988, 15.4021, 0.68, 35.3238, 999);
- AliMedium(95, "SSD End ladder$",95, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
- AliMaterial(96, "SSD cone$",63.546, 29., 1.15, 1.265, 999);
- AliMedium(96, "SSD cone$", 96, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
-
-}
-//______________________________________________________________________
-void AliITSvPPRsymm::InitAliITSgeom(){
-// Based on the geometry tree defined in Geant 3.21, this
-// routine initilizes the Class AliITSgeom from the Geant 3.21 ITS geometry
-// sturture.
- if(!(dynamic_cast<TGeant3*>(gMC))) {
- Error("InitAliITSgeom",
- "Wrong Monte Carlo. InitAliITSgeom uses TGeant3 calls");
- return;
- } // end if
- cout << "Reading Geometry transformation directly from Geant 3." << endl;
- const Int_t nlayers = 6;
- const Int_t ndeep = 9;
- Int_t itsGeomTreeNames[nlayers][ndeep],lnam[20],lnum[20];
- Int_t nlad[nlayers],ndet[nlayers];
- Double_t t[3],r[10];
- Float_t par[20],att[20];
- Int_t npar,natt,idshape,imat,imed;
- AliITSGeant3Geometry *ig = new AliITSGeant3Geometry();
- Int_t mod,lay,lad,det,i,j,k;
- Char_t names[nlayers][ndeep][4];
- Int_t itsGeomTreeCopys[nlayers][ndeep];
- if(fMinorVersion == 1){ // Option A
- Char_t *namesA[nlayers][ndeep] = {
- {"ALIC","ITSV","ITSD","IT12","I12A","I10A","I103","I101","ITS1"}, // lay=1
- {"ALIC","ITSV","ITSD","IT12","I12A","I20A","I1D3","I1D1","ITS2"}, // lay=2
- {"ALIC","ITSV","ITSD","IT34","I004","I302","ITS3"," "," "}, // lay=3
- {"ALIC","ITSV","ITSD","IT34","I005","I402","ITS4"," "," "}, // lay=4
- {"ALIC","ITSV","ITSD","IT56","I565","I562","ITS5"," "," "}, // lay=5
- {"ALIC","ITSV","ITSD","IT56","I569","I566","ITS6"," "," "}};// lay=6
- Int_t itsGeomTreeCopysA[nlayers][ndeep]= {{1,1,1,1,10, 2, 4,1,1},// lay=1
- {1,1,1,1,10, 4, 4,1,1},// lay=2
- {1,1,1,1,14, 6, 1,0,0},// lay=3
- {1,1,1,1,22, 8, 1,0,0},// lay=4
- {1,1,1,1,34,22, 1,0,0},// lay=5
- {1,1,1,1,38,25, 1,0,0}};//lay=6
- for(i=0;i<nlayers;i++)for(j=0;j<ndeep;j++){
- for(k=0;k<4;k++) names[i][j][k] = namesA[i][j][k];
- itsGeomTreeCopys[i][j] = itsGeomTreeCopysA[i][j];
- } // end for i,j
- }else if(fMinorVersion == 2){ // Option B
- Char_t *namesB[nlayers][ndeep] = {
- {"ALIC","ITSV","ITSD","IT12","I12B","I10B","I107","I101","ITS1"}, // lay=1
- {"ALIC","ITSV","ITSD","IT12","I12B","I20B","I1D7","I1D1","ITS2"}, // lay=2
- {"ALIC","ITSV","ITSD","IT34","I004","I302","ITS3"," "," "}, // lay=3
- {"ALIC","ITSV","ITSD","IT34","I005","I402","ITS4"," "," "}, // lay=4
- {"ALIC","ITSV","ITSD","IT56","I565","I562","ITS5"," "," "}, // lay=5
- {"ALIC","ITSV","ITSD","IT56","I569","I566","ITS6"," "," "}};// lay=6
- Int_t itsGeomTreeCopysB[nlayers][ndeep]= {{1,1,1,1,10, 2, 4,1,1},// lay=1
- {1,1,1,1,10, 4, 4,1,1},// lay=2
- {1,1,1,1,14, 6, 1,0,0},// lay=3
- {1,1,1,1,22, 8, 1,0,0},// lay=4
- {1,1,1,1,34,22, 1,0,0},// lay=5
- {1,1,1,1,38,25, 1,0,0}};//lay=6
- for(i=0;i<nlayers;i++)for(j=0;j<ndeep;j++){
- for(k=0;k<4;k++) names[i][j][k] = namesB[i][j][k];
- itsGeomTreeCopys[i][j] = itsGeomTreeCopysB[i][j];
- } // end for i,j
- } // end if fMinorVersion
- // Sorry, but this is not very pritty code. It should be replaced
- // at some point with a version that can search through the geometry
- // tree its self.
- cout << "Reading Geometry informaton from Geant3 common blocks" << endl;
- for(i=0;i<20;i++) lnam[i] = lnum[i] = 0;
- for(i=0;i<nlayers;i++)for(j=0;j<ndeep;j++)
- itsGeomTreeNames[i][j] = ig->StringToInt(names[i][j]);
- mod = 0;
- for(i=0;i<nlayers;i++){
- k = 1;
- for(j=0;j<ndeep;j++) if(itsGeomTreeCopys[i][j]!=0)
- k *= TMath::Abs(itsGeomTreeCopys[i][j]);
- mod += k;
- } // end for i
-
- if(fITSgeom!=0) delete fITSgeom;
- nlad[0]=20;nlad[1]=40;nlad[2]=14;nlad[3]=22;nlad[4]=34;nlad[5]=38;
- ndet[0]=4;ndet[1]=4;ndet[2]=6;ndet[3]=8;ndet[4]=22;ndet[5]=25;
- fITSgeom = new AliITSgeom(0,6,nlad,ndet,mod);
- mod = -1;
- for(lay=1;lay<=nlayers;lay++){
- for(j=0;j<ndeep;j++) lnam[j] = itsGeomTreeNames[lay-1][j];
- for(j=0;j<ndeep;j++) lnum[j] = itsGeomTreeCopys[lay-1][j];
- switch (lay){
- case 1: case 2: // layers 1 and 2 are a bit special
- lad = 0;
- for(j=1;j<=itsGeomTreeCopys[lay-1][4];j++){
- lnum[4] = j;
- for(k=1;k<=itsGeomTreeCopys[lay-1][5];k++){
- lad++;
- lnum[5] = k;
- for(det=1;det<=itsGeomTreeCopys[lay-1][6];det++){
- lnum[6] = det;
- mod++;
- ig->GetGeometry(ndeep,lnam,lnum,t,r,idshape,npar,natt,
- par,att,imat,imed);
- fITSgeom->CreatMatrix(mod,lay,lad,det,kSPD,t,r);
- if(!(fITSgeom->IsShapeDefined((Int_t)kSPD)))
- fITSgeom->ReSetShape(kSPD,
- new AliITSgeomSPD425Short());
- } // end for det
- } // end for k
- } // end for j
- break;
- case 3: case 4: case 5: case 6: // layers 3-6
- lnum[6] = 1;
- for(lad=1;lad<=itsGeomTreeCopys[lay-1][4];lad++){
- lnum[4] = lad;
- for(det=1;det<=itsGeomTreeCopys[lay-1][5];det++){
- lnum[5] = det;
- mod++;
- ig->GetGeometry(7,lnam,lnum,t,r,idshape,npar,natt,
- par,att,imat,imed);
- switch (lay){
- case 3: case 4:
- fITSgeom->CreatMatrix(mod,lay,lad,det,kSDD,t,r);
- if(!(fITSgeom->IsShapeDefined(kSDD)))
- fITSgeom->ReSetShape(kSDD,new AliITSgeomSDD256());
- break;
- case 5:
- fITSgeom->CreatMatrix(mod,lay,lad,det,kSSD,t,r);
- if(!(fITSgeom->IsShapeDefined(kSSD)))
- fITSgeom->ReSetShape(kSSD,
- new AliITSgeomSSD275and75());
- break;
- case 6:
- fITSgeom->CreatMatrix(mod,lay,lad,det,kSSDp,t,r);
- if(!(fITSgeom->IsShapeDefined(kSSDp)))
- fITSgeom->ReSetShape(kSSDp,
- new AliITSgeomSSD75and275());
- break;
- } // end switch
- } // end for det
- } // end for lad
- break;
- } // end switch
- } // end for lay
- return;
-}
-//_____________________________________________________________________________
-void AliITSvPPRsymm::Init(){
-////////////////////////////////////////////////////////////////////////
-// Initialise the ITS after it has been created.
-////////////////////////////////////////////////////////////////////////
- Int_t i;
-
- cout << endl;
- for(i=0;i<26;i++) cout << "*";
- cout << " ITSvPPRsymm" << fMinorVersion << "_Init ";
- for(i=0;i<25;i++) cout << "*";cout << endl;
-//
- if(fRead[0]=='\0') strncpy(fRead,fEuclidGeomDet,60);
- if(fWrite[0]=='\0') strncpy(fWrite,fEuclidGeomDet,60);
- if(fITSgeom!=0) delete fITSgeom;
- fITSgeom = new AliITSgeom();
- if(fGeomDetIn) fITSgeom->ReadNewFile(fRead);
- if(!fGeomDetIn) this->InitAliITSgeom();
- if(fGeomDetOut) fITSgeom->WriteNewFile(fWrite);
- AliITS::Init();
-//
- for(i=0;i<72;i++) cout << "*";
- cout << endl;
-}
-//_____________________________________________________________________________
-void AliITSvPPRsymm::DrawModule(){
-////////////////////////////////////////////////////////////////////////
-// Draw a shaded view of the FMD version 9.
-////////////////////////////////////////////////////////////////////////
-
- // Set everything unseen
- gMC->Gsatt("*", "seen", -1);
- //
- // Set ALIC mother visible
- gMC->Gsatt("ALIC","SEEN",0);
- //
- // Set the volumes visible
- gMC->Gsatt("ITSD","SEEN",0);
- gMC->Gsatt("ITS1","SEEN",1);
- gMC->Gsatt("ITS2","SEEN",1);
- gMC->Gsatt("ITS3","SEEN",1);
- gMC->Gsatt("ITS4","SEEN",1);
- gMC->Gsatt("ITS5","SEEN",1);
- gMC->Gsatt("ITS6","SEEN",1);
-
- gMC->Gsatt("IPCB","SEEN",1);
- gMC->Gsatt("ICO2","SEEN",1);
- gMC->Gsatt("ICER","SEEN",0);
- gMC->Gsatt("ISI2","SEEN",0);
- gMC->Gsatt("IPLA","SEEN",0);
- gMC->Gsatt("ICO3","SEEN",0);
- gMC->Gsatt("IEPX","SEEN",0);
- gMC->Gsatt("ISI3","SEEN",1);
- gMC->Gsatt("ISUP","SEEN",0);
- gMC->Gsatt("ICHO","SEEN",0);
- gMC->Gsatt("ICMO","SEEN",0);
- gMC->Gsatt("ICMD","SEEN",0);
- gMC->Gsatt("ICCO","SEEN",1);
- gMC->Gsatt("ICCM","SEEN",0);
- gMC->Gsatt("ITMD","SEEN",0);
- gMC->Gsatt("ITTT","SEEN",1);
-
- //
- gMC->Gdopt("hide", "on");
- gMC->Gdopt("shad", "on");
- gMC->Gsatt("*", "fill", 7);
- gMC->SetClipBox(".");
- gMC->SetClipBox("*", 0, 300, -300, 300, -300, 300);
- gMC->DefaultRange();
- gMC->Gdraw("alic", 40, 30, 0, 11, 10, .07, .07);
- gMC->Gdhead(1111, "Inner Tracking System Version 1");
- gMC->Gdman(17, 6, "MAN");
-}
-//_____________________________________________________________________________
-void AliITSvPPRsymm::StepManager(){
-////////////////////////////////////////////////////////////////////////
-// Called for every step in the ITS, then calles the AliITShit class
-// creator with the information to be recoreded about that hit.
-// The value of the macro ALIITSPRINTGEOM if set to 1 will allow the
-// printing of information to a file which can be used to create a .det
-// file read in by the routine CreateGeometry(). If set to 0 or any other
-// value except 1, the default behavior, then no such file is created nor
-// it the extra variables and the like used in the printing allocated.
-////////////////////////////////////////////////////////////////////////
- Int_t copy, id;
- Int_t copy1,copy2;
- Float_t hits[8];
- Int_t vol[4];
- TLorentzVector position, momentum;
- TClonesArray &lhits = *fHits;
- //
- // Track status
- vol[3] = 0;
- if(gMC->IsTrackInside()) vol[3] += 1;
- if(gMC->IsTrackEntering()) vol[3] += 2;
- if(gMC->IsTrackExiting()) vol[3] += 4;
- if(gMC->IsTrackOut()) vol[3] += 8;
- if(gMC->IsTrackDisappeared()) vol[3] += 16;
- if(gMC->IsTrackStop()) vol[3] += 32;
- if(gMC->IsTrackAlive()) vol[3] += 64;
- //
- // Fill hit structure.
- if(!(gMC->TrackCharge())) return;
- //
- // Only entering charged tracks
- if((id = gMC->CurrentVolID(copy)) == fIdSens[0]) {
- vol[0] = 1;
- id = gMC->CurrentVolOffID(0,copy);
- //detector copy in the ladder = 1<->4 (ITS1 < I101 < I103 < I10A)
- vol[1] = copy;
- gMC->CurrentVolOffID(1,copy1);
- //ladder copy in the module = 1<->2 (I10A < I12A)
- gMC->CurrentVolOffID(2,copy2);
- //module copy in the layer = 1<->10 (I12A < IT12)
- vol[2] = copy1+(copy2-1)*2;//# of ladders in one module = 2
- } else if(id == fIdSens[1]){
- vol[0] = 2;
- id = gMC->CurrentVolOffID(0,copy);
- //detector copy in the ladder = 1<->4 (ITS2 < I1D1 < I1D3 < I20A)
- vol[1] = copy;
- gMC->CurrentVolOffID(1,copy1);
- //ladder copy in the module = 1<->4 (I20A < I12A)
- gMC->CurrentVolOffID(2,copy2);
- //module copy in the layer = 1<->10 (I12A < IT12)
- vol[2] = copy1+(copy2-1)*4;//# of ladders in one module = 4
- } else if(id == fIdSens[2]){
- vol[0] = 3;
- id = gMC->CurrentVolOffID(1,copy);
- //detector copy in the ladder = 1<->6 (ITS3 < I302 < I004)
- vol[1] = copy;
- id = gMC->CurrentVolOffID(2,copy);
- //ladder copy in the layer = 1<->14 (I004 < IT34)
- vol[2] = copy;
- } else if(id == fIdSens[3]){
- vol[0] = 4;
- id = gMC->CurrentVolOffID(1,copy);
- //detector copy in the ladder = 1<->8 (ITS4 < I402 < I005)
- vol[1] = copy;
- id = gMC->CurrentVolOffID(2,copy);
- //ladder copy in the layer = 1<->22 (I005 < IT34))
- vol[2] = copy;
- }else if(id == fIdSens[4]){
- vol[0] = 5;
- id = gMC->CurrentVolOffID(1,copy);
- //detector copy in the ladder = 1<->22 (ITS5 < I562 < I565)
- vol[1] = copy;
- id = gMC->CurrentVolOffID(2,copy);
- //ladder copy in the layer = 1<->34 (I565 < IT56)
- vol[2] = copy;
- }else if(id == fIdSens[5]){
- vol[0] = 6;
- id = gMC->CurrentVolOffID(1,copy);
- //detector copy in the ladder = 1<->25 (ITS6 < I566 < I569)
- vol[1] = copy;
- id = gMC->CurrentVolOffID(2,copy);
- //ladder copy in the layer = 1<->38 (I569 < IT56)
- vol[2] = copy;
- } else {
- return; // not an ITS volume?
- } // end if/else if (gMC->CurentVolID(copy) == fIdSens[i])
-//
- gMC->TrackPosition(position);
- gMC->TrackMomentum(momentum);
- hits[0]=position[0];
- hits[1]=position[1];
- hits[2]=position[2];
- hits[3]=momentum[0];
- hits[4]=momentum[1];
- hits[5]=momentum[2];
- hits[6]=gMC->Edep();
- hits[7]=gMC->TrackTime();
- // Fill hit structure with this new hit.
- new(lhits[fNhits++]) AliITShit(fIshunt,gAlice->CurrentTrack(),vol,hits);
-
- return;
-
-}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff