-void SetViewVolumes(const char* opt){
+//----------------------------------------------------------------------
+
+AliITSv11GeometrySPD *gspd;
+AliITSv11GeometrySDD *gsdd;
+AliITSv11GeometrySupport *gsupp;
+AliITSv11GeometrySSD *gssd;
+//
+//----------------------------------------------------------------------
+void Displayv11(const char* filename=""){
+ // Display AliITSv11 Geometry
+ // Inputs:
+ // const char* filename output file with the display in it
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+
+ gSystem->Load("libGeom");
+ //
+ if(gGeoManager) delete gGeoManager;
+ mgr2 = gGeoManager = new TGeoManager("ITSGeometry",
+ " ITS Simulation Geometry Manager");
+ //
+ TGeoMaterial *vacmat = new TGeoMaterial("Vacume",0,0,0);
+ TGeoMedium *vacmed = new TGeoMedium("Vacume_med",1,vacmat);
+ TGeoVolume *ALIC = mgr2->MakeBox("ALIC",vacmed,1000.,1000.,2000.);
+ mgr2->SetTopVolume(ALIC);
+ TGeoVolume *ITS = mgr2->MakeBox("ITSV",vacmed,990.,990.,1990.);
+ TGeoVolumeAssembly *ITSspd = new TGeoVolumeAssembly("ITSspd");
+ ITS->AddNode(ITSspd,1);
+ ALIC->AddNode(ITS,1);
+ //
+ /*
+ AliITSv11 *its = new AliITSv11(0,3);
+ its->SetDebug(ISetits(0,-1));
+ its->GetSPDGeometry()->SetDebug(ISetits(0,-1));
+ its->GetSupGeometry()->SetDebug(ISetits(0,-1));
+ its->CreateMaterials();
+ its->CreateGeometry();
+ */
+ gspd = new AliITSv11GeometrySPD(0);
+ //gsdd = new AliITSv11GeometrySDD();
+ gsupp = new AliITSv11GeometrySupport(0);
+ //gssd = new AliITSv11GeometrySSD();
//
- if(!strstr(opt,"all")) return;
+ Int_t imat=1,imed=1,ireturn=0;
+ ireturn = gspd->CreateSPDCentralMaterials(imed,imat);
+ gspd->SPDSector(ITSspd,mgr2);
+ gsupp->SPDCone(ITS,mgr2);
+ gsupp->SetDebug(0);
+ gsupp->SDDCone(ITS,mgr2);
+ //gsdd->Layer3(ITS);
+ //gsdd->Layer4(ITS);
+ gsupp->SSDCone(ITS,mgr2);
+ gsupp->ServicesCableSupport(ITS);
//
+ mgr2->CloseGeometry();
+ //
+ TControlBar *bar=new TControlBar("vertical","ITS Geometry Display",10,10);
+ bar->AddButton("Set Clipping on","ISetits(2,1)","Clipping on");
+ bar->AddButton("Set Cllipping off","ISetits(2,0)","Clipping off");
+ bar->AddButton("Set axis on","ISetits(3,1)","Show Axis on");
+ bar->AddButton("Set axis off","ISetits(3,0)","Show Axis off");
+ bar->AddButton("Set perspective on","ISetits(4,1)","Perspective on");
+ bar->AddButton("Set perspective off","ISetits(4,0)","Perspective off");
+ bar->AddButton("Set RayTrace on","ISetits(5,1)","Perspective on");
+ bar->AddButton("Set RayTrace off","ISetits(5,0)","Perspective off");
+ bar->AddButton("Set circle/80","ISetits(1,80)","circles ~ by 80 lines");
+ bar->AddButton("Display Geometry","Displayit()","Run Displayit");
+ bar->AddButton("Display SPD Sector Volume","EngineeringSPDSector()",
+ "Run EngineeringSPDSector");
+ bar->AddButton("Display SPD Ceneral Volume","EngineeringSPDCenter()",
+ "Run EngineeringSPDCenter");
+ bar->AddButton("Display SPD Thermal Sheald","EngineeringSPDThS()",
+ "Run EngineeringSPDThS");
+ bar->AddButton("Display SPD Sector Cross Sections","EngineeringSPDSCS()",
+ "Run EngineeringSPDSCS");
+ bar->AddButton("Display SDD Layer 3","EngineeringSDDLayer3()",
+ "Run EngineeringSDDLayer3");
+ bar->AddButton("Display SDD Layer 4","EngineeringSDDLayer4()",
+ "Run EngineeringSDDLayer4");
+ bar->AddButton("Display SDD Cone","EngineeringSDDCone()",
+ "Run EngineeringSDDCone");
+ bar->AddButton("Display SDD Centeral Cylinder","EngineeringSDDCylinder()",
+ "Run EngineeringSDDCylinder");
+ bar->AddButton("Display SSD Cone","EngineeringSSDCone()",
+ "Run EngineeringSSDCone");
+ bar->AddButton("Display SSD Centeral Cylinder","EngineeringSSDCylinder()",
+ "Run EngineeringSSDCylinder");
+ bar->AddButton("Display SUP RB24 side","EngineeringSupRB24()",
+ "Run EngineeringSupRB24");
+ bar->AddButton("Display Cable Trays RB24 side","EngineeringSupTrayRB24()",
+ "Run EngineeringSupTrayRB24");
+ bar->AddButton("Display SUP RB26 side","EngineeringSupRB26()",
+ "Run EngineeringSupRB26");
+ bar->AddButton("Save Geometry to File","ExportToFile()",
+ "Run ExportToFile");
+ bar->AddButton("Quit/Exit",".q","Exit");
+ bar->Show();
+ gROOT->SaveContext();
+ //Displayit();
}
//----------------------------------------------------------------------
-void Displayv11(const char* filename=""){
- // Display AliITSv11 Geometry
+void ExportToFile(){
+ // Quirry file name and write geometry to a root file.
// Inputs:
// const char* filename output file with the display in it
// Outputs:
// none.
// Retrurn:
// none.
+ Char_t filename[100];
+
+ printf("Eneter File name:");
+ scanf("%s",filename);
+
+ gGeoManager->Export(filename);
+}
+//----------------------------------------------------------------------
+Int_t ISetits(Int_t t,Int_t v){
+ static Int_t itsdebug=1,nsegments=80,cut=0,axis=1,perspective=0,ray=0;
+
+ switch (t) {
+ case 0:
+ if(v<0) return itsdebug;
+ itsdebug = v;
+ break;
+ case 1:
+ if(v<0) return nsegments;
+ nsegments= v;
+ break;
+ case 2:
+ if(v<0) return cut;
+ cut = v;
+ break;
+ case 3:
+ if(v<0) return axis;
+ axis = v;
+ break;
+ case 4:
+ if(v<0) return perspective;
+ perspective = v;
+ break;
+ case 5:
+ if(v<0) return ray;
+ ray = v;
+ break;
+ }// end switch
+ return 0;
+}
+//----------------------------------------------------------------------
+Double_t DSetits(Int_t t,Double_t v){
+ static Double_t phimincut=0.0,phimaxcut=180.0;
+ static Double_t longitude=90.0,latitude=0.0,psi=0.0;
- Displayit();
+ switch (t) {
+ case 0:
+ if(v<0.) return phimincut;
+ phimincut = v;
+ break;
+ case 1:
+ if(v<0.) return phimaxcut;
+ phimaxcut = v;
+ break;
+ case 2:
+ if(v<0.) return longitude;
+ longitude = v;
+ break;
+ case 3:
+ if(v<0.) return latitude;
+ latitude = v;
+ break;
+ case 4:
+ if(v<0.) return latitude;
+ latitude = v;
+ break;
+ }// end switch
+ return 0;
}
//----------------------------------------------------------------------
void Displayit(){
// none.
// Retrurn:
// none.
-
- gSystem->Load("libGeom");
+ Int_t irr;
//
- TCanvas *c1 = new TCanvas("C1","ITS Simulation Geometry",900,900);
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoVolume *ALIC = mgr2->GetTopVolume();
+ TCanvas *c1;
+ if(!(c1 = (TCanvas*)gROOT->FindObject("C1")))
+ c1 = new TCanvas("C1","ITS Simulation Geometry",900,900);
c1->Divide(2,2);
//
- if(gGeoManager) delete gGeoManager;
- TGeoManager *mgr2 = gGeoManager = new TGeoManager("ITSGeometry",
- " ITS Simulation Geometry Manager");
- //
- TGeoMaterial *vacmat = new TGeoMaterial("Vacume",0,0,0);
- TGeoMedium *vacmed = new TGeoMedium("Vacume_med",1,vacmat);
- TGeoVolume *ALIC = mgr2->MakeBox("ALIC",vacmed,100.,100.,200.);
- mgr2->SetTopVolume(ALIC);
- //
- AliITSv11 *its = new AliITSv11();
- its->SetDebug(1);
- its->CreateMaterials();
- its->CreateGeometry();
- //SetViewVolumes("all");
- //
- mgr2->CloseGeometry();
- mgr2->SetNsegments(80);
+ mgr2->SetNsegments(ISetits(1,-1));
//
mgr2->SetVisLevel(6);
mgr2->SetVisOption(0);
//mgr2->CheckOverlaps(0.01);
//mgr2->PrintOverlaps();
- //mgr2->SetPhiRange(0.0,180.0);
+ if(ISetits(2,-1)==1){
+ TGeoShape *clip = new TGeoTubeSeg(0, 1000, 2000, 45, 90);
+ mgr2->SetClippingShape(clip);
+ } // end if
+ if(ISetits(2,-1)!=0) mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
//
c1->cd(1);
ALIC->Draw();
TPad *p1 = c1->GetPad(1);
TView *view1 = p1->GetView();
if(view1){
- view1->SetParralel();
+ view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view1->SetParallel();
+ else view1->SetPerspective();
view1->Front();
- view1->ShowAxis();
- } // end if view2
+ if(ISetits(3,-1)!=0) view1->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) ALIC->Raytrace();
c1->cd(2);
ALIC->Draw();
TPad *p2 = c1->GetPad(2);
TView *view2 = p2->GetView();
if(view2){
- view2->SetParralel();
+ view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view2->SetParallel();
+ else view2->SetPerspective();
view2->RotateView(60.,30.);
- view2->ShowAxis();
+ if(ISetits(3,-1)!=0) view2->ShowAxis();
} // end if view2
+ if(ISetits(5,-1)==1) ALIC->Raytrace();
c1->cd(3);
- c1->SetPhi(90.0); c1->SetTheta(90.0);
ALIC->Draw();
+ c1->SetPhi(90.0); c1->SetTheta(90.0);
TPad *p3 = c1->GetPad(3);
TView *view3 = p3->GetView();
if(view3){
- view3->SetParralel();
+ view3->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view3->SetParallel();
+ else view3->SetPerspective();
view3->Top();
- view3->ShowAxis();
+ if(ISetits(3,-1)!=0) view3->ShowAxis();
} // end if view3
+ if(ISetits(5,-1)==1) ALIC->Raytrace();
c1->cd(4);
ALIC->Draw();
TPad *p4 = c1->GetPad(4);
TView *view4 = p4->GetView();
if(view4){
- view4->SetParralel();
+ view4->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view4->SetParallel();
+ else view4->SetPerspective();
view4->Side();
- view4->ShowAxis();
+ if(ISetits(3,-1)!=0) view4->ShowAxis();
} // end if view4
+ if(ISetits(5,-1)==1) ALIC->Raytrace();
+ //
+}
+//----------------------------------------------------------------------
+void EngineeringSPDSCS(){
+ // Display SPD Carbon Fiber Sector Cross sections A and B
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return:
+ // none.
+ TPolyLine *a0,*a1,*b0,*b1;
+ TPolyMarker *p;
+ TCanvas *cSPDSCS=0;
+ Int_t i;
+ Double_t max=0.0;
+
+ a0 = new TPolyLine();
+ a1 = new TPolyLine();
+ b0 = new TPolyLine();
+ b1 = new TPolyLine();
+ p = new TPolyMarker();
+ a0->SetLineColor(1);
+ a1->SetLineColor(4);
+ b0->SetLineColor(3);
+ b0->SetLineStyle(2); // dashed
+ b1->SetLineColor(6);
+ b1->SetLineStyle(2); // dashed
+ p->SetMarkerColor(2);
+ p->SetMarkerStyle(5);
+ if(gspd->Make2DcrossSections(*a0,*a1,*b0,*b1,*p)==kFALSE) return;
+ for(i=0;i<a0->GetN();i++) {
+ if(TMath::Abs(a0->GetX()[i])>max) max = TMath::Abs(a0->GetX()[i]);
+ if(TMath::Abs(a0->GetY()[i])>max) max = TMath::Abs(a0->GetY()[i]);
+ } // end for i
+ for(i=0;i<a1->GetN();i++) {
+ if(TMath::Abs(a1->GetX()[i])>max) max = TMath::Abs(a0->GetX()[i]);
+ if(TMath::Abs(a1->GetY()[i])>max) max = TMath::Abs(a1->GetY()[i]);
+ } // end for i
+ for(i=0;i<b0->GetN();i++) {
+ if(TMath::Abs(b0->GetX()[i])>max) max = TMath::Abs(b0->GetX()[i]);
+ if(TMath::Abs(b0->GetY()[i])>max) max = TMath::Abs(b0->GetY()[i]);
+ } // end for i
+ for(i=0;i<b1->GetN();i++) {
+ if(TMath::Abs(b1->GetX()[i])>max) max = TMath::Abs(b1->GetX()[i]);
+ if(TMath::Abs(b1->GetY()[i])>max) max = TMath::Abs(b1->GetY()[i]);
+ } // end for i
+ max *= 1.05;
+ cSPDSCS = gROOT->FindObject("cSPDSCS");
+ if(cSPDSCS==0) delete cSPDSCS;
+ cSPDSCS = new TCanvas("cSPDSCS","SPD Carbon Fiber Sector Cross sections",2);
+ cSPDSCS->Range(-max,-max,max,max);
+ //cSPDSCS->RangeAxis();
+ cSPDSCS->SetFixedAspectRatio(kTRUE);
+ //
+ a0->Draw("");
+ a1->Draw("same");
+ p->Draw("same");
+ b0->Draw("same");
+ b1->Draw("same");
+ cSPDSCS->Update();
+ return;
+}
+//----------------------------------------------------------------------
+void EngineeringSPDSector(){
+ // Display SPD Sector Geometry
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Int_t irr;
+ //
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoVolume *ALIC = mgr2->GetTopVolume();
+ TCanvas *c4;
+ if(!(c4 = (TCanvas*)gROOT->FindObject("C4")))
+ c4 = new TCanvas("C4","ITS SPD Layer Geometry Side View",500,500);
+ TGeoVolume *ITS,*ITSspd,*SPDLay=0;
+ TGeoNode *node;
+ TArrow *arrow=new TArrow();
+ //
+ node = ALIC->FindNode("ITSV_1");
+ ITS = node->GetVolume();
+ node = ITS->FindNode("ITSspd_1");
+ ITSspd = node->GetVolume();
+ node = ITSspd->FindNode("ITSSPDCarbonFiberSectorV_1");
+ //node = ITSspd->FindNode("ITSSPDTempSPDMotherVolume_1");
+ SPDLay = node->GetVolume();
+ //
+ mgr2->SetNsegments(ISetits(1,-1));
+ //
+ mgr2->SetVisLevel(6);
+ mgr2->SetVisOption(0);
+ //mgr2->CheckOverlaps(0.01);
+ //mgr2->PrintOverlaps();
+ if(ISetits(2,-1)==1){
+ TGeoShape *clip = new TGeoTubeSeg(0, 1000, 2000, 45, 90);
+ mgr2->SetClippingShape(clip);
+ } // end if
+ mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ if(ISetits(2,-1)!=0) mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ //
+ SPDLay->Draw();
+ TView *view1 = c4->GetView();
+ if(view1){
+ view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view1->SetParallel();
+ else view1->SetPerspective();
+ view1->Front();
+ if(ISetits(3,-1)!=0) view1->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SPDLay->Raytrace();
+ //
+ if(!(c5 = (TCanvas*)gROOT->FindObject("C5")))
+ c5 = new TCanvas("C5","ITS SPD Sector Geometry End View",500,500);
+ SPDLay->Draw();
+ TView *view2 = c5->GetView();
+ if(view2){
+ view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view2->SetParallel();
+ else view2->SetPerspective();
+ view2->Top();
+ if(ISetits(3,-1)!=0) view2->ShowAxis();
+ } // end if view2
+ if(ISetits(5,-1)==1) SPDLay->Raytrace();
+ //
+}
+//----------------------------------------------------------------------
+void EngineeringSPDCenter(){
+ // Display SPD Centeral Geometry
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Int_t irr;
+ //
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoVolume *ALIC = mgr2->GetTopVolume();
+ TCanvas *c4;
+ if(!(c4 = (TCanvas*)gROOT->FindObject("C4")))
+ c4 = new TCanvas("C4","ITS SPD Layer Geometry Side View",500,500);
+ TGeoVolume *ITS,*ITSspd,*SPDLay=0;
+ TGeoNode *node;
+ TArrow *arrow=new TArrow();
+ //
+ node = ALIC->FindNode("ITSV_1");
+ ITS = node->GetVolume();
+ node = ITS->FindNode("ITSspd_1");
+ ITSspd = node->GetVolume();
+ //
+ mgr2->SetNsegments(ISetits(1,-1));
+ //
+ mgr2->SetVisLevel(6);
+ mgr2->SetVisOption(0);
+ //mgr2->CheckOverlaps(0.01);
+ //mgr2->PrintOverlaps();
+ if(ISetits(2,-1)==1){
+ TGeoShape *clip = new TGeoTubeSeg(0, 1000, 2000, 45, 90);
+ mgr2->SetClippingShape(clip);
+ } // end if
+ mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ if(ISetits(2,-1)!=0) mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ //
+ ITSspd->Draw();
+ TView *view1 = c4->GetView();
+ if(view1){
+ view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view1->SetParallel();
+ else view1->SetPerspective();
+ view1->Front();
+ if(ISetits(3,-1)!=0) view1->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SPDLay->Raytrace();
+ //
+ if(!(c5 = (TCanvas*)gROOT->FindObject("C5")))
+ c5 = new TCanvas("C5","ITS SPD Centeral Geometry End View",500,500);
+ ITSspd->Draw();
+ TView *view2 = c5->GetView();
+ if(view2){
+ view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view2->SetParallel();
+ else view2->SetPerspective();
+ view2->Top();
+ if(ISetits(3,-1)!=0) view2->ShowAxis();
+ } // end if view2
+ if(ISetits(5,-1)==1) ITSspd->Raytrace();
+ //
+}
+//----------------------------------------------------------------------
+void EngineeringSPDThS(){
+ // Display SPD Thermal Sheald Geometry
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Int_t irr;
+ //
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoVolume *ALIC = mgr2->GetTopVolume();
+ TCanvas *c4;
+ if(!(c4 = (TCanvas*)gROOT->FindObject("C4")))
+ c4 = new TCanvas("C4","ITS SDD Cylinder Geometry",900,450);
+ c4->Divide(2,1);
+ TGeoVolume *ITS,*SPDThS=0;
+ TGeoNode *node;
+ TArrow *arrow=new TArrow();
+ //
+ node = ALIC->FindNode("ITSV_1");
+ ITS = node->GetVolume();
+ node = ITS->FindNode("ITSspdThermalShealdMother_1");
+ SPDThS = node->GetVolume();
+ //
+ mgr2->SetNsegments(ISetits(1,-1));
+ //
+ mgr2->SetVisLevel(6);
+ mgr2->SetVisOption(0);
+ //mgr2->CheckOverlaps(0.01);
+ //mgr2->PrintOverlaps();
+ if(ISetits(2,-1)==1){
+ TGeoShape *clip = new TGeoTubeSeg(0, 1000, 2000, 45, 90);
+ mgr2->SetClippingShape(clip);
+ } // end if
+ mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ if(ISetits(2,-1)!=0) mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ //
+ c4->cd(1);
+ SPDThS->Draw();
+ TPad *p1 = c4->GetPad(1);
+ TView *view1 = p1->GetView();
+ if(view1){
+ view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view1->SetParallel();
+ else view1->SetPerspective();
+ view1->Front();
+ if(ISetits(3,-1)!=0) view1->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SPDThS->Raytrace();
+ //
+ c4->cd(2);
+ SPDThS->Draw();
+ TPad *p2 = c4->GetPad(2);
+ TView *view2 = p2->GetView();
+ if(view2){
+ view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view2->SetParallel();
+ else view2->SetPerspective();
+ view2->Top();
+ if(ISetits(3,-1)!=0) view2->ShowAxis();
+ } // end if view2
+ if(ISetits(5,-1)==1) SPDThS->Raytrace();
+ //
+}
+//----------------------------------------------------------------------
+void EngineeringSDDLayer3(){
+ // Display SDD Layer 3 Geometry
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Int_t irr;
+ //
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoVolume *ALIC = mgr2->GetTopVolume();
+ TCanvas *c4;
+ if(!(c4 = (TCanvas*)gROOT->FindObject("C4")))
+ c4 = new TCanvas("C4","ITS SDD Layer 3 Geometry Side View",500,500);
+ TGeoVolume *ITS,*SDDLay3=0;
+ TGeoNode *node;
+ TArrow *arrow=new TArrow();
+ //
+ node = ALIC->FindNode("ITSV_1");
+ ITS = node->GetVolume();
+ node = ITS->FindNode("ITSsddLayer3_1");
+ SDDLay3 = node->GetVolume();
+ //
+ mgr2->SetNsegments(ISetits(1,-1));
+ //
+ mgr2->SetVisLevel(6);
+ mgr2->SetVisOption(0);
+ //mgr2->CheckOverlaps(0.01);
+ //mgr2->PrintOverlaps();
+ if(ISetits(2,-1)==1){
+ TGeoShape *clip = new TGeoTubeSeg(0, 1000, 2000, 45, 90);
+ mgr2->SetClippingShape(clip);
+ } // end if
+ mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ if(ISetits(2,-1)!=0) mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ //
+ SDDLay3->Draw();
+ TView *view1 = c4->GetView();
+ if(view1){
+ view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view1->SetParallel();
+ else view1->SetPerspective();
+ view1->Front();
+ if(ISetits(3,-1)!=0) view1->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SDDLay3->Raytrace();
+ //
+ if(!(c5 = (TCanvas*)gROOT->FindObject("C5")))
+ c5 = new TCanvas("C5","ITS SDD Layer 3 Geometry End View",500,500);
+ SDDLay3->Draw();
+ TView *view2 = c5->GetView();
+ if(view2){
+ view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view2->SetParallel();
+ else view2->SetPerspective();
+ view2->Top();
+ if(ISetits(3,-1)!=0) view2->ShowAxis();
+ } // end if view2
+ if(ISetits(5,-1)==1) SDDLay3->Raytrace();
//
}
+//----------------------------------------------------------------------
+void EngineeringSDDLayer4(){
+ // Display SDD Layer 4 Geometry
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Int_t irr;
+ //
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoVolume *ALIC = mgr2->GetTopVolume();
+ TCanvas *c4;
+ if(!(c4 = (TCanvas*)gROOT->FindObject("C4")))
+ c4 = new TCanvas("C4","ITS SDD Layer 4 Geometry Side View",500,500);
+ TGeoVolume *ITS,*SDDLay4=0;
+ TGeoNode *node;
+ TArrow *arrow=new TArrow();
+ //
+ node = ALIC->FindNode("ITSV_1");
+ ITS = node->GetVolume();
+ node = ITS->FindNode("ITSsddLayer4_1");
+ SDDLay4 = node->GetVolume();
+ //
+ mgr2->SetNsegments(ISetits(1,-1));
+ //
+ mgr2->SetVisLevel(6);
+ mgr2->SetVisOption(0);
+ //mgr2->CheckOverlaps(0.01);
+ //mgr2->PrintOverlaps();
+ if(ISetits(2,-1)==1){
+ TGeoShape *clip = new TGeoTubeSeg(0, 1000, 2000, 45, 90);
+ mgr2->SetClippingShape(clip);
+ } // end if
+ mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ if(ISetits(2,-1)!=0) mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ //
+ SDDLay4->Draw();
+ TView *view1 = c4->GetView();
+ if(view1){
+ view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view1->SetParallel();
+ else view1->SetPerspective();
+ view1->Front();
+ if(ISetits(3,-1)!=0) view1->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SDDLay4->Raytrace();
+ //
+ if(!(c5 = (TCanvas*)gROOT->FindObject("C5")))
+ c5 = new TCanvas("C5","ITS SDD Layer 4 Geometry End View",500,500);
+ SDDLay4->Draw();
+ TView *view2 = c5->GetView();
+ if(view2){
+ view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view2->SetParallel();
+ else view2->SetPerspective();
+ view2->Top();
+ if(ISetits(3,-1)!=0) view2->ShowAxis();
+ } // end if view2
+ if(ISetits(5,-1)==1) SDDLay4->Raytrace();
+ //
+}
+//----------------------------------------------------------------------
+void EngineeringSDDCone(){
+ // Display SDD Cone Geometry
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Int_t irr;
+ //
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoVolume *ALIC = mgr2->GetTopVolume();
+ TCanvas *c2;
+ if(!(c2 = (TCanvas*)gROOT->FindObject("C2")))
+ c2 = new TCanvas("C2","ITS SDD Cone Geometry",900,450);
+ c2->Divide(2,1);
+ TGeoVolume *ITS,*SDD=0;
+ TGeoNode *node;
+ //
+ node = ALIC->FindNode("ITSV_1");
+ ITS = node->GetVolume();
+ node = ITS->FindNode("ITSsddConeL_1");
+ SDD = node->GetVolume();
+ //
+ mgr2->SetNsegments(ISetits(1,-1));
+ //
+ mgr2->SetVisLevel(6);
+ mgr2->SetVisOption(0);
+ //mgr2->CheckOverlaps(0.01);
+ //mgr2->PrintOverlaps();
+ if(ISetits(2,-1)==1){
+ TGeoShape *clip = new TGeoTubeSeg(0, 1000, 2000, 45, 90);
+ mgr2->SetClippingShape(clip);
+ } // end if
+ mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ if(ISetits(2,-1)!=0) mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ //
+ c2->cd(1);
+ SDD->Draw();
+ TPad *p1 = c2->GetPad(1);
+ TView *view1 = p1->GetView();
+ if(view1){
+ view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view1->SetParallel();
+ else view1->SetPerspective();
+ view1->Front();
+ if(ISetits(3,-1)!=0) view1->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SDD->Raytrace();
+ //
+ c2->cd(2);
+ SDD->Draw();
+ TPad *p2 = c2->GetPad(2);
+ TView *view2 = p2->GetView();
+ if(view2){
+ view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view2->SetParallel();
+ else view2->SetPerspective();
+ view2->Top();
+ if(ISetits(3,-1)!=0) view2->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SDD->Raytrace();
+ //
+}
+//----------------------------------------------------------------------
+void EngineeringSDDCylinder(){
+ // Display SDD Cylinder Geometry
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Int_t irr;
+ //
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoVolume *ALIC = mgr2->GetTopVolume();
+ TCanvas *c3;
+ if(!(c3 = (TCanvas*)gROOT->FindObject("C3")))
+ c3 = new TCanvas("C3","ITS SDD Cylinder Geometry",900,450);
+ c3->Divide(2,1);
+ TGeoVolume *ITS,*SDD=0;
+ TGeoNode *node;
+ TArrow *arrow=new TArrow();
+ //
+ node = ALIC->FindNode("ITSV_1");
+ ITS = node->GetVolume();
+ node = ITS->FindNode("ITSsddCentCylCF_1");
+ SDD = node->GetVolume();
+ Double_t Rmin = ((TGeoTube*)(SDD->GetShape()))->GetRmin();
+ Double_t Rmax = ((TGeoTube*)(SDD->GetShape()))->GetRmax();
+ Double_t Dz = ((TGeoTube*)(SDD->GetShape()))->GetDz();
+ //
+ mgr2->SetNsegments(ISetits(1,-1));
+ //
+ mgr2->SetVisLevel(6);
+ mgr2->SetVisOption(0);
+ //mgr2->CheckOverlaps(0.01);
+ //mgr2->PrintOverlaps();
+ if(ISetits(2,-1)==1){
+ TGeoShape *clip = new TGeoTubeSeg(0, 1000, 2000, 45, 90);
+ mgr2->SetClippingShape(clip);
+ } // end if
+ mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ if(ISetits(2,-1)!=0) mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ //
+ c3->cd(1);
+ SDD->Draw();
+ TPad *p1 = c3->GetPad(1);
+ TView *view1 = p1->GetView();
+ if(view1){
+ view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view1->SetParallel();
+ else view1->SetPerspective();
+ view1->Front();
+ if(ISetits(3,-1)!=0) view1->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SDD->Raytrace();
+ //arrow->DrawArrow(1.01*Rmax,-Dz,1.01*Rmax,+Dz);
+ //
+ c3->cd(2);
+ SDD->Draw();
+ TPad *p2 = c3->GetPad(2);
+ TView *view2 = p2->GetView();
+ if(view2){
+ view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view2->SetParallel();
+ else view2->SetPerspective();
+ view2->Top();
+ if(ISetits(3,-1)!=0) view2->ShowAxis();
+ } // end if view2
+ if(ISetits(5,-1)==1) SDD->Raytrace();
+ //arrow->DrawArrow(Rmax,0.0,Rmax,0.0);
+ //Double_t s = TMath::Sin(0.7),c = TMath::Cos(0.7);
+ //arrow->DrawArrow(-Rmin*c,-Rmin*s,Rmin*c,Rmin*s);
+ //
+}
+//----------------------------------------------------------------------
+void EngineeringSSDCone(){
+ // Display SSD Cone Geometry
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Int_t irr;
+ //
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoVolume *ALIC = mgr2->GetTopVolume();
+ TCanvas *c2;
+ if(!(c2 = (TCanvas*)gROOT->FindObject("C2")))
+ c2 = new TCanvas("C2","ITS SSD Cone Geometry",900,450);
+ c2->Divide(2,1);
+ TGeoVolume *ITS,*SSD=0;
+ TGeoNode *node;
+ //
+ node = ALIC->FindNode("ITSV_1");
+ ITS = node->GetVolume();
+ node = ITS->FindNode("ITSssdConeA_1");
+ SSD = node->GetVolume();
+ //
+ mgr2->SetNsegments(ISetits(1,-1));
+ //
+ mgr2->SetVisLevel(6);
+ mgr2->SetVisOption(0);
+ //mgr2->CheckOverlaps(0.01);
+ //mgr2->PrintOverlaps();
+ if(ISetits(2,-1)==1){
+ TGeoShape *clip = new TGeoTubeSeg(0, 1000, 2000, 45, 90);
+ mgr2->SetClippingShape(clip);
+ } // end if
+ mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ if(ISetits(2,-1)!=0) mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ //
+ c2->cd(1);
+ SSD->Draw();
+ TPad *p1 = c2->GetPad(1);
+ TView *view1 = p1->GetView();
+ if(view1){
+ view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view1->SetParallel();
+ else view1->SetPerspective();
+ view1->Top();
+ if(ISetits(3,-1)!=0) view1->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SSD->Raytrace();
+ //
+ c2->cd(2);
+ SSD->Draw();
+ TPad *p2 = c2->GetPad(2);
+ TView *view2 = p2->GetView();
+ if(view2){
+ view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view2->SetParallel();
+ else view2->SetPerspective();
+ view2->Front();
+ if(ISetits(3,-1)!=0) view2->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SSD->Raytrace();
+ //
+}
+//----------------------------------------------------------------------
+void EngineeringSSDCylinder(){
+ // Display SSD Cylinder Geometry
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Int_t irr;
+ //
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoVolume *ALIC = mgr2->GetTopVolume();
+ TCanvas *c3;
+ if(!(c3 = (TCanvas*)gROOT->FindObject("C3")))
+ c3 = new TCanvas("C3","ITS SSD Cylinder Geometry",900,450);
+ c3->Divide(2,1);
+ TGeoVolume *ITS,*SSD=0;
+ TGeoNode *node;
+ TArrow *arrow=new TArrow();
+ //
+ node = ALIC->FindNode("ITSV_1");
+ ITS = node->GetVolume();
+ node = ITS->FindNode("ITSssdCentCylCA_1");
+ SSD = node->GetVolume();
+ //Double_t Rmin = ((TGeoPcon*)(SSD->GetShape()))->GetRmin();
+ //Double_t Rmax = ((TGeoPcon*)(SSD->GetShape()))->GetRmax();
+ //Double_t Dz = ((TGeoPcon*)(SSD->GetShape()))->GetDz();
+ //
+ mgr2->SetNsegments(ISetits(1,-1));
+ //
+ mgr2->SetVisLevel(6);
+ mgr2->SetVisOption(0);
+ //mgr2->CheckOverlaps(0.01);
+ //mgr2->PrintOverlaps();
+ if(ISetits(2,-1)==1){
+ TGeoShape *clip = new TGeoTubeSeg(0, 1000, 2000, 45, 90);
+ mgr2->SetClippingShape(clip);
+ } // end if
+ mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ if(ISetits(2,-1)!=0) mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ //
+ c3->cd(1);
+ SSD->Draw();
+ TPad *p1 = c3->GetPad(1);
+ TView *view1 = p1->GetView();
+ if(view1){
+ view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view1->SetParallel();
+ else view1->SetPerspective();
+ view1->Front();
+ if(ISetits(3,-1)!=0) view1->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SSD->Raytrace();
+ //arrow->DrawArrow(1.01*Rmax,-Dz,1.01*Rmax,+Dz);
+ //
+ c3->cd(2);
+ SSD->Draw();
+ TPad *p2 = c3->GetPad(2);
+ TView *view2 = p2->GetView();
+ if(view2){
+ view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view2->SetParallel();
+ else view2->SetPerspective();
+ view2->Top();
+ if(ISetits(3,-1)!=0) view2->ShowAxis();
+ } // end if view2
+ if(ISetits(5,-1)==1) SSD->Raytrace();
+ //arrow->DrawArrow(Rmax,0.0,Rmax,0.0);
+ //Double_t s = TMath::Sin(0.7),c = TMath::Cos(0.7);
+ //arrow->DrawArrow(-Rmin*c,-Rmin*s,Rmin*c,Rmin*s);
+ //
+}
+//----------------------------------------------------------------------
+void EngineeringSupRB24(){
+ // Display RB 24 side cable tray support structure Geometry
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Int_t irr;
+ //
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoVolume *ALIC = mgr2->GetTopVolume();
+ TCanvas *c4;
+ if(!(c4 = (TCanvas*)gROOT->FindObject("C4")))
+ c4 = new TCanvas("C4","ITS SDD Cylinder Geometry",900,450);
+ c4->Divide(2,1);
+ TGeoVolume *ITS,*SUPRB24=0;
+ TGeoNode *node;
+ TArrow *arrow=new TArrow();
+ //
+ node = ALIC->FindNode("ITSV_1");
+ ITS = node->GetVolume();
+ node = ITS->FindNode("ITSsupFrameM24_1");
+ SUPRB24 = node->GetVolume();
+ //
+ mgr2->SetNsegments(ISetits(1,-1));
+ //
+ mgr2->SetVisLevel(6);
+ mgr2->SetVisOption(0);
+ //mgr2->CheckOverlaps(0.01);
+ //mgr2->PrintOverlaps();
+ if(ISetits(2,-1)==1){
+ TGeoShape *clip = new TGeoTubeSeg(0, 1000, 2000, 45, 90);
+ mgr2->SetClippingShape(clip);
+ } // end if
+ mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ if(ISetits(2,-1)!=0) mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ //
+ c4->cd(1);
+ SUPRB24->Draw();
+ TPad *p1 = c4->GetPad(1);
+ TView *view1 = p1->GetView();
+ if(view1){
+ view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view1->SetParallel();
+ else view1->SetPerspective();
+ view1->Front();
+ if(ISetits(3,-1)!=0) view1->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SUPRB24->Raytrace();
+ //
+ c4->cd(2);
+ SUPRB24->Draw();
+ TPad *p2 = c4->GetPad(2);
+ TView *view2 = p2->GetView();
+ if(view2){
+ view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view2->SetParallel();
+ else view2->SetPerspective();
+ view2->Top();
+ if(ISetits(3,-1)!=0) view2->ShowAxis();
+ } // end if view2
+ if(ISetits(5,-1)==1) SUPRB24->Raytrace();
+ //
+}
+//----------------------------------------------------------------------
+void EngineeringSupTrayRB24(){
+ // Display RB 24 side cable tray support structure Geometry
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Int_t irr;
+ //
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoVolume *ALIC = mgr2->GetTopVolume();
+ TCanvas *c4,*c5;
+ //if(!(c4 = (TCanvas*)gROOT->FindObject("C4")))
+ c4 = new TCanvas("C4","ITS RB24 Cable Trays and Patch Pannels",500,500);
+ //c4->Divide(2,1);
+ TGeoVolume *ITS,*SUPRB24=0;
+ TGeoNode *node;
+ TArrow *arrow=new TArrow();
+ //
+ node = ALIC->FindNode("ITSV_1");
+ ITS = node->GetVolume();
+ node = ITS->FindNode("ITSsupCableTrayMotherMT24_1");
+ SUPRB24 = node->GetVolume();
+ //
+ mgr2->SetNsegments(ISetits(1,-1));
+ //
+ mgr2->SetVisLevel(6);
+ mgr2->SetVisOption(0);
+ //mgr2->CheckOverlaps(0.01);
+ //mgr2->PrintOverlaps();
+ if(ISetits(2,-1)==1){
+ TGeoShape *clip = new TGeoTubeSeg(0, 1000, 2000, 45, 90);
+ mgr2->SetClippingShape(clip);
+ } // end if
+ mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ if(ISetits(2,-1)!=0) mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ //
+ c4->cd(1);
+ SUPRB24->Draw();
+ //TPad *p1 = c4->GetPad(1);
+ //TView *view1 = p1->GetView();
+ TView *view1 = c4->GetView();
+ if(view1){
+ view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view1->SetParallel();
+ else view1->SetPerspective();
+ view1->Front();
+ if(ISetits(3,-1)!=0) view1->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SUPRB24->Raytrace();
+ //
+ //c4->cd(2);
+ c5 = new TCanvas("C5","ITS RB24 Cable Trays and Patch Pannels",500,500);
+ c5->cd(1);
+ SUPRB24->Draw();
+ //TPad *p2 = c5->GetPad(1);
+ //TView *view2 = p2->GetView();
+ TView *view2 = c5->GetView();
+ if(view2){
+ view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view2->SetParallel();
+ else view2->SetPerspective();
+ view2->Top();
+ if(ISetits(3,-1)!=0) view2->ShowAxis();
+ } // end if view2
+ if(ISetits(5,-1)==1) SUPRB24->Raytrace();
+ //
+}
+//----------------------------------------------------------------------
+void EngineeringSupRB26(){
+ // Display RB 26 side cable tray support structure
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Int_t irr;
+ //
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoVolume *ALIC = mgr2->GetTopVolume();
+ TCanvas *c5;
+ if(!(c5 = (TCanvas*)gROOT->FindObject("C5")))
+ c5 = new TCanvas("C5","ITS SDD Cylinder Geometry",900,450);
+ c5->Divide(2,1);
+ TGeoVolume *ITS,*SUPRB26=0;
+ TGeoNode *node;
+ TArrow *arrow=new TArrow();
+ //
+ node = ALIC->FindNode("ITSV_1");
+ ITS = node->GetVolume();
+ node = ITS->FindNode("ITSsupFrameM26_1");
+ SUPRB26 = node->GetVolume();
+ //
+ mgr2->SetNsegments(ISetits(1,-1));
+ //
+ mgr2->SetVisLevel(6);
+ mgr2->SetVisOption(0);
+ //mgr2->CheckOverlaps(0.01);
+ //mgr2->PrintOverlaps();
+ if(ISetits(2,-1)==1){
+ TGeoShape *clip = new TGeoTubeSeg(0, 1000, 2000, 45, 90);
+ mgr2->SetClippingShape(clip);
+ } // end if
+ mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ if(ISetits(2,-1)!=0) mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ //
+ c5->cd(1);
+ SUPRB26->Draw();
+ TPad *p1 = c5->GetPad(1);
+ TView *view1 = p1->GetView();
+ if(view1){
+ view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view1->SetParallel();
+ else view1->SetPerspective();
+ view1->Front();
+ if(ISetits(3,-1)!=0) view1->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SUPRB26->Raytrace();
+ //
+ c5->cd(2);
+ SUPRB26->Draw();
+ TPad *p2 = c5->GetPad(2);
+ TView *view2 = p2->GetView();
+ if(view2){
+ view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view2->SetParallel();
+ else view2->SetPerspective();
+ view2->Top();
+ if(ISetits(3,-1)!=0) view2->ShowAxis();
+ } // end if view2
+ if(ISetits(5,-1)==1) SUPRB26->Raytrace();
+ //
+}
\ No newline at end of file
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff