#include "AliLog.h"
#include <iostream>
#include <fstream>
+#include <time.h>
#include <TROOT.h>
#include <TPluginManager.h>
#include <TObjArray.h>
+#include <TObjString.h>
#include <TString.h>
+
int main(int argc, char **argv) {
if (argc<2) {
- printf("Wrong number of arguments\n");
+ printf("SPD DA ERROR: Wrong number of arguments\n");
return -1;
}
- // directory structure, hard coded
+ UInt_t nrErrors = 0;
+
+ // directory structure, hard coded // FOR OFFLINE VERSION:
char *saveDirDead = "./calibResults/Dead"; // may NOT delete content
char *saveDirDeadToFXS = "./calibResults/DeadToFXS"; // may delete content
char *saveDirDeadRef = "./calibResults/DeadReference"; // may delete content
char *saveDirNoisyRef = "./calibResults/NoisyReference"; // may delete content
char *saveDirIdsToFXS = "./calibResults/IdsToFXS"; // may delete content
char *configFilesDir = "./configFiles"; // may delete content
- // make sure the directory structure is put up correctly:
+ // clean up and make sure the directory structure is put up correctly:
+#ifndef SPD_DA_OFF
+ system("rm ./calibResults -rf >& /dev/null");
+ system("rm ./ITS -rf >& /dev/null");
+#else
+ system("rm ./calibResults/DeadToFXS -rf >& /dev/null");
+ system("rm ./calibResults/DeadReference -rf >& /dev/null");
+ system("rm ./calibResults/NoisyToFXS -rf >& /dev/null");
+ system("rm ./calibResults/NoisyReference -rf >& /dev/null");
+ system("rm ./calibResults/IdsToFXS -rf >& /dev/null");
+#endif
system("mkdir ./calibResults >& /dev/null");
system("mkdir ./calibResults/Dead >& /dev/null");
system("mkdir ./calibResults/DeadToFXS >& /dev/null");
system("mkdir ./calibResults/NoisyReference >& /dev/null");
system("mkdir ./calibResults/IdsToFXS >& /dev/null");
system("mkdir ./configFiles >& /dev/null");
+#ifndef SPD_DA_OFF
+ system("mkdir ./ITS >& /dev/null");
+ system("mkdir ./ITS/Calib >& /dev/null");
+ system("mkdir ./ITS/Calib/SPDNoisy >& /dev/null");
+#endif
// parameters config file
TString paramsFileName = Form("%s/physics_params.txt",configFilesDir);
"TStreamerInfo()");
// turn off annoying warning messages
- new AliLog;
- AliLog::Instance()->SetGlobalDebugLevel(-20);
-
+ // NB: Should not be handled here
+ AliLog* logger = AliLog::GetRootLogger();
+ logger->SetGlobalDebugLevel(-20);
// ********* STEP 0: Get configuration files from db (if there are any) , then read parameters*********
UInt_t nrTuningParams = 0;
TString idp = "spd_physics_params";
par_status=daqDA_DB_getFile(idp.Data(),paramsFileName.Data());
if (par_status) {
- printf("Failed to get config file %s: status=%d. Using default tuning parameters.\n",idp.Data(),par_status);
+ printf("SPD DA: Failed to get config file %s: status=%d. Using default tuning parameters.\n",idp.Data(),par_status);
+ TString rmCmd = Form("rm -f %s",paramsFileName.Data());
+ system(rmCmd.Data());
}
#endif
if (par_status==0) {
ifstream paramsFile;
paramsFile.open(paramsFileName.Data(), ifstream::in);
if (paramsFile.fail()) {
- printf("No config file (%s) present. Using default tuning parameters.\n",paramsFileName.Data());
+ printf("SPD DA: No config file (%s) present. Using default tuning parameters.\n",paramsFileName.Data());
}
else {
while(1) {
paramsFile >> paramN;
if (paramsFile.eof()) break;
paramsFile >> paramV;
- TString* paramNS = new TString(paramN);
- TString* paramVS = new TString(paramV);
- paramNames.AddAtAndExpand((TObject*)paramNS,nrTuningParams);
- paramVals.AddAtAndExpand((TObject*)paramVS,nrTuningParams);
+ paramNames.AddAtAndExpand(new TObjString(paramN),nrTuningParams);
+ paramVals.AddAtAndExpand(new TObjString(paramV),nrTuningParams);
nrTuningParams++;
if (paramsFile.eof()) break;
}
}
}
// for (UInt_t i=0; i<nrTuningParams; i++) {
- // printf("Entry %d: N=%s , V=%s\n",i,((TString*)paramNames.At(i))->Data(),((TString*)paramVals.At(i))->Data());
+ // // printf("Entry %d: N=%s , V=%s\n",i,((TString*)paramNames.At(i))->Data(),((TString*)paramVals.At(i))->Data());
+ // printf("Entry %d: N=%s , V=%s\n",i,((TObjString*)paramNames.At(i))->GetString().Data(),((TObjString*)paramVals.At(i))->GetString().Data());
// }
// create calibration handler (needed already at step 1 in order to fill which eq,hs,chips are active
AliITSOnlineCalibrationSPDhandler* handler = new AliITSOnlineCalibrationSPDhandler();
+
// Read silent=dead+inactive info from previous calibrations
+#ifndef SPD_DA_OFF
+ for (UInt_t eq=0; eq<20; eq++) {
+ Int_t getPreviousDead_status = 0;
+ TString idpd = Form("spd_previous_dead_%d",eq);
+ TString fileName = Form("%s/SPD_Dead_%d.root",saveDirDead,eq);
+ getPreviousDead_status = daqDA_DB_getFile(idpd.Data(),fileName.Data());
+ // printf("daqDA_DB_getFile(%s,%s)\n",idpd.Data(),fileName.Data());
+ if (getPreviousDead_status) {
+ printf("SPD DA: Failed to get dead file %s: status=%d. Dead search will start from zero for this eq.\n",idpd.Data(),getPreviousDead_status);
+ TString rmCmd = Form("rm -f %s",fileName.Data());
+ system(rmCmd.Data());
+ }
+ }
+#endif
handler->SetFileLocation(saveDirDead);
handler->ReadSilentFromFiles();
-//!!! // start by deactivating all eq - should then be activated when found in raw data
-//!!! for (UInt_t eq=0; eq<20; eq++) {
-//!!! handler->ActivateEq(eq,kFALSE);
-//!!! }
+ printf("SPD DA: Number of single dead pixels from previous runs: %d\n",handler->GetNrDead());
+
+ // Read hit-maps from previous runs
+#ifndef SPD_DA_OFF
+ for (UInt_t eq=0; eq<20; eq++) {
+ Int_t getPreviousHitmap_status = 0;
+ TString idph = Form("spd_previous_hitmap_%d",eq);
+ TString fileName = Form("%s/SPDphys_dead_run_0_0_eq_%d.root",saveDirDeadRefTmp,eq);
+ getPreviousHitmap_status = daqDA_DB_getFile(idph.Data(),fileName.Data());
+ // printf("daqDA_DB_getFile(%s,%s)\n",idph.Data(),fileName.Data());
+ if (getPreviousHitmap_status) {
+ printf("SPD DA: Failed to get previous hitmap file %s: status=%d. Dead search will start with empty hitmap for this eq.\n",idph.Data(),getPreviousHitmap_status);
+ TString rmCmd = Form("rm -f %s",fileName.Data());
+ system(rmCmd.Data());
+ }
+ }
+#endif
#ifndef SPD_DA_OFF
if (getenv("DATE_RUN_NUMBER")==0) {
- printf("DATE_RUN_NUMBER not properly set.\n");
+ printf("SPD DA ERROR: DATE_RUN_NUMBER not properly set.\n");
return -1;
}
int runNr = atoi(getenv("DATE_RUN_NUMBER"));
// container objects
AliITSOnlineSPDphys *physObj[20];
Bool_t bPhysInit[20];
- for (UInt_t eqId=0; eqId<20; eqId++) {
- physObj[eqId]=NULL;
- bPhysInit[eqId]=kFALSE;
+ for (UInt_t eq=0; eq<20; eq++) {
+ physObj[eq]=NULL;
+ bPhysInit[eq]=kFALSE;
}
+ UInt_t eventNr=0;
+
// loop over run segments in case of offline mode
#ifdef SPD_DA_OFF
for (int segNr=startSeg; segNr<argc; segNr++) {
status=monitorSetDataSource( argv[segNr] );
#endif
if (status!=0) {
- printf("monitorSetDataSource() failed : %s\n",monitorDecodeError(status));
+ printf("SPD DA ERROR: monitorSetDataSource() failed : %s\n",monitorDecodeError(status));
return -1;
}
/* declare monitoring program */
status=monitorDeclareMp("ITS_SPD_PHYS");
if (status!=0) {
- printf("monitorDeclareMp() failed : %s\n",monitorDecodeError(status));
+ printf("SPD DA ERROR: monitorDeclareMp() failed : %s\n",monitorDecodeError(status));
return -1;
}
/* define wait event timeout - 1s max */
monitorSetNoWaitNetworkTimeout(1000);
- UInt_t eventNr=0;
-
/* main loop (infinite) */
for(;;) {
/* get next event (blocking call until timeout) */
status=monitorGetEventDynamic((void **)&event);
if (status==MON_ERR_EOF) {
- printf ("End of File detected\n");
+ printf ("SPD DA: End of File detected\n");
break; /* end of monitoring file has been reached */
}
if (status!=0) {
- printf("monitorGetEventDynamic() failed : %s\n",monitorDecodeError(status));
+ printf("SPD DA: monitorGetEventDynamic() failed : %s\n",monitorDecodeError(status));
break;
}
while (str->Next()) {
- Int_t eqId = reader->GetDDLID();
+ Int_t eq = reader->GetDDLID();
// check that this hs is active in handler object
- if (!(handler->IsActiveEq(eqId))) {
- printf("Warning: Found Eq (%d) , previously inactive in this run!\n",eqId);
- handler->ActivateEq(eqId);
+ if (!(handler->IsActiveEq(eq))) {
+ printf("SPD DA: Found Eq (%d) , previously inactive\n",eq);
+ handler->ActivateEq(eq);
}
- if (eqId>=0 && eqId<20) {
- if (!bPhysInit[eqId]) { // this code is duplicated for the moment... (see also below)
- TString fileName = Form("%s/SPDphys_run_%d_eq_%d.root",saveDirNoisyRef,runNr,eqId);
- physObj[eqId] = new AliITSOnlineSPDphys(fileName.Data());
- physObj[eqId]->AddRunNr(runNr);
- physObj[eqId]->SetEqNr(eqId);
- bPhysInit[eqId]=kTRUE;
+ if (eq>=0 && eq<20) {
+ if (!bPhysInit[eq]) { // this code is duplicated for the moment... (see also below)
+ TString fileName = Form("%s/SPDphys_run_%d_eq_%d.root",saveDirNoisyRef,runNr,eq);
+ physObj[eq] = new AliITSOnlineSPDphys(fileName.Data());
+ physObj[eq]->AddRunNr(runNr);
+ physObj[eq]->SetEqNr(eq);
+ bPhysInit[eq]=kTRUE;
}
UInt_t hs = str->GetHalfStaveNr();
// check that this hs is active in handler object
- if (!(handler->IsActiveHS(eqId,hs))) {
- printf("Warning: Found HS (%d,%d) , previously inactive in this run!\n",eqId,hs);
- handler->ActivateHS(eqId,hs);
+ if (!(handler->IsActiveHS(eq,hs))) {
+ printf("SPD DA: Found HS (%d,%d) , previously inactive\n",eq,hs);
+ handler->ActivateHS(eq,hs);
}
UInt_t chip = str->GetChipAddr();
// check that this chip is active in handler object
- if (!(handler->IsActiveChip(eqId,hs,chip))) {
- printf("Info: Found Chip (%d,%d,%d) , inactive in previous run.\n",eqId,hs,chip);
- handler->ActivateChip(eqId,hs,chip);
+ if (!(handler->IsActiveChip(eq,hs,chip))) {
+ printf("SPD DA: Found Chip (%d,%d,%d) , previously inactive\n",eq,hs,chip);
+ handler->ActivateChip(eq,hs,chip);
}
- physObj[eqId]->IncrementHits(hs,chip,str->GetChipCol(),str->GetChipRow());
+ physObj[eq]->IncrementHits(hs,chip,str->GetChipCol(),str->GetChipRow());
}
}
- // check which eq and hs are active for first event only
+ // check which eq and hs are active, for first event only
if (eventNr==0) {
- for (UInt_t eqId=0; eqId<20; eqId++) {
+ for (UInt_t eq=0; eq<20; eq++) {
// activate Eq and HSs in handler object
- if (str->IsActiveEq(eqId)) {
- handler->ActivateEq(eqId);
+ if (str->IsActiveEq(eq)) {
+ handler->ActivateEq(eq);
for (UInt_t hs=0; hs<6; hs++) {
- handler->ActivateHS(eqId,hs,str->IsActiveHS(eqId,hs));
+ if (str->IsActiveHS(eq,hs)) {
+ handler->ActivateHS(eq,hs);
+ for (UInt_t chip=0; chip<10; chip++) {
+ if (str->IsActiveChip(eq,hs,chip)) {
+ handler->ActivateChip(eq,hs,chip);
+ }
+ else {
+ handler->ActivateChip(eq,hs,chip,kFALSE);
+ }
+ }
+ }
+ else {
+ handler->ActivateHS(eq,hs,kFALSE);
+ }
}
- if (!bPhysInit[eqId]) { // this code is duplicated for the moment... (see also above)
- TString fileName = Form("%s/SPDphys_run_%d_eq_%d.root",saveDirNoisyRef,runNr,eqId);
- physObj[eqId] = new AliITSOnlineSPDphys(fileName.Data());
- physObj[eqId]->AddRunNr(runNr);
- physObj[eqId]->SetEqNr(eqId);
- bPhysInit[eqId]=kTRUE;
+ if (!bPhysInit[eq]) { // this code is duplicated for the moment... (see also above)
+ TString fileName = Form("%s/SPDphys_run_%d_eq_%d.root",saveDirNoisyRef,runNr,eq);
+ physObj[eq] = new AliITSOnlineSPDphys(fileName.Data());
+ physObj[eq]->AddRunNr(runNr);
+ physObj[eq]->SetEqNr(eq);
+ bPhysInit[eq]=kTRUE;
}
}
else {
- handler->ActivateEq(eqId,kFALSE);
+ handler->ActivateEq(eq,kFALSE);
}
}
}
#ifdef SPD_DA_OFF
- printf("progress: %d\n",(unsigned int)( ((Float_t)(segNr-startSeg+1))/(argc-startSeg)*50 ));
+ printf("SPD DA: progress: %d\n",(unsigned int)( ((Float_t)(segNr-startSeg+1))/(argc-startSeg)*50 ));
}
#endif
-
+
// clean up phys objects (also saves them)
for (UInt_t eq=0; eq<20; eq++) {
if (physObj[eq]!=NULL) delete physObj[eq];
}
+ printf("SPD DA: %d events collected for this run.\n",eventNr);
// ********* STEP 2: Analyze phys container files. ************************************************
- // clear noisyToFXS dir:
- TString command;
- command = Form("cd %s; rm -f *",saveDirNoisyToFXS);
- system(command.Data());
- // clear deadToFXS dir:
- command = Form("cd %s; rm -f *",saveDirDeadToFXS);
- system(command.Data());
-
+ time_t timeStamp = time(NULL);
+ // printf("*** Start step2 , %d\n",time(NULL) - timeStamp);
UInt_t firstRunNrDead = runNr;
// check data in container
if (noisyAnalyzer->GetEqNr() != eq) {
if (noisyAnalyzer->GetEqNr() != 999) {
- printf("Error: Mismatching EqId in Container data and filename (%d!=%d). Skipping.\n",
- noisyAnalyzer->GetEqNr(),eq);
+ printf("SPD DA ERROR: Mismatching EqId in Container data and filename (%d!=%d). Skipping eq.\n",noisyAnalyzer->GetEqNr(),eq);
}
delete noisyAnalyzer;
continue;
// configure analyzer with tuning parameters etc:
for (UInt_t i=0; i<nrTuningParams; i++) {
- noisyAnalyzer->SetParam(((TString*)paramNames.At(i))->Data(),((TString*)paramVals.At(i))->Data());
+ noisyAnalyzer->SetParam(((TObjString*)paramNames.At(i))->GetString().Data(),((TObjString*)paramVals.At(i))->GetString().Data());
}
- printf("SPD phys STEP 2: Noisy search for eq %d\n",eq);
+ printf("SPD DA: SPD phys STEP 2: Noisy search for eq %d\n",eq);
// search for noisy pixels:
nrEnoughStatNoisy += noisyAnalyzer->ProcessNoisyPixels();
delete noisyAnalyzer;
#ifndef SPD_DA_OFF
- daqDA_progressReport((unsigned int)((eq+1)*2.5));
+ // daqDA_progressReport((unsigned int)((eq+1)*2.5));
+ printf("SPD DA: progress: %d , %ld\n",(unsigned int)(50+(eq+1)*2.5), time(NULL) - timeStamp);
#else
- printf("progress: %d\n",(unsigned int)(50+(eq+1)*1.25));
+ // printf("SPD DA: progress: %d\n",(unsigned int)(50+(eq+1)*1.25));
+ printf("SPD DA: progress: %d , %ld\n",(unsigned int)(50+(eq+1)*1.25), time(NULL) - timeStamp);
#endif
}
// *** *** *** end loop over equipments (eq_id)
- printf("Noisy search finished. %d noisy pixels found. %d chips (%d) had enough statistics.\n",
- handler->GetNrNoisy(),nrEnoughStatNoisy,nrEqActiveNoisy*60);
+ printf("SPD DA: Noisy search finished. %d noisy pixels found. %d chips had enough statistics.\n",
+ handler->GetNrNoisy(),nrEnoughStatNoisy);
handler->SetFileLocation(saveDirNoisyToFXS);
- handler->WriteNoisyToFiles();
-
-
-
+ UInt_t nrNoisyFilesProduced = handler->WriteNoisyToFiles();
+#ifndef SPD_DA_OFF
+ // save noisy to local OCDB
+ handler->WriteNoisyToDB(runNr,9999999,".");
+ // store local OCDB file in daq Det DB
+ TString ocdb_fileName = Form("./ITS/Calib/SPDNoisy/Run%d_9999999_v0_s0.root",runNr);
+ TString idod = "spd_noisy_ocdb";
+ Int_t ocdb_store_status = daqDA_DB_storeFile(ocdb_fileName.Data(),idod.Data());
+ // printf("daqDA_DB_storeFile(%s,%s)\n",ocdb_fileName.Data(),idod.Data());
+ if (ocdb_store_status) {
+ printf("SPD DA ERROR: Failed to store noisy ocdb file %s in daqDetDB: status=%d.\n",idod.Data(),ocdb_store_status);
+ }
+#endif
// check data in container
if (deadAnalyzer->GetEqNr() != eq) {
if (deadAnalyzer->GetEqNr() != 999) {
- printf("Error: Mismatching EqId in Dead Container data and filename (%d!=%d). Skipping.\n",
- deadAnalyzer->GetEqNr(),eq);
+ printf("SPD DA ERROR: Mismatching EqId in Dead Container data and filename (%d!=%d). Skipping eq.\n",deadAnalyzer->GetEqNr(),eq);
}
delete deadAnalyzer;
- //!!! nrDeadChips+=60; // since this eq is inactive...
+ nrDeadChips+=60; // since this eq is inactive...
continue;
}
// configure analyzer with tuning parameters etc:
for (UInt_t i=0; i<nrTuningParams; i++) {
- deadAnalyzer->SetParam(((TString*)paramNames.At(i))->Data(),((TString*)paramVals.At(i))->Data());
+ deadAnalyzer->SetParam(((TObjString*)paramNames.At(i))->GetString().Data(),((TObjString*)paramVals.At(i))->GetString().Data());
}
- printf("SPD phys STEP 2: Dead search for eq %d\n",eq);
+ UInt_t nrEventsCollected = physObj->GetNrEvents();
+ printf("SPD DA: SPD phys STEP 2: Dead search for eq %d (%d events)\n",eq,nrEventsCollected);
// search for dead pixels:
nrEnoughStatChips += deadAnalyzer->ProcessDeadPixels();
delete deadAnalyzer;
+
#ifndef SPD_DA_OFF
- daqDA_progressReport((unsigned int)(50+(eq+1)*2.5));
+ // daqDA_progressReport((unsigned int)(50+(eq+1)*2.5));
+ printf("SPD DA: progress: %d , %ld\n",(unsigned int)(50+(eq+1)*2.5), time(NULL) - timeStamp);
#else
- printf("progress: %d\n",(unsigned int)(75+(eq+1)*1.25));
+ // printf("SPD DA: progress: %d\n",(unsigned int)(75+(eq+1)*1.25));
+ printf("SPD DA: progress: %d , %ld\n",(unsigned int)(75+(eq+1)*1.25), time(NULL) - timeStamp);
#endif
}
- // *** *** *** end loop over equipments (eq_id)
+ // *** *** *** end loop over equipments (eq)
+
+
- printf("Dead search finished. %d dead pixels in total.\n%d chips (%d) had enough statistics. %d chips were dead. %d chips were inefficient.\n",handler->GetNrDead(),nrEnoughStatChips,nrEqActiveDead*60,nrDeadChips,nrInefficientChips);
+ printf("SPD DA: Dead search finished.\n");
+ printf("SPD DA: %d single dead pixels , %d dead or inactive pixels in total.\n",handler->GetNrDead(),handler->GetNrSilent());
+ printf("SPD DA: %d chips had enough statistics. %d chips are dead. %d chips are inefficient.\n",nrEnoughStatChips,nrDeadChips,nrInefficientChips);
handler->SetFileLocation(saveDirDead);
handler->WriteSilentToFilesAlways();
handler->SetFileLocation(saveDirDeadToFXS);
handler->WriteSilentToFilesAlways();
- printf("Opening id list file\n");
+ // printf("SPD DA: Opening id list file\n");
+ printf("SPD DA: Opening id list file , %ld\n",time(NULL) - timeStamp);
TString idsFXSFileName = Form("%s/FXSids_run_%d.txt",saveDirIdsToFXS,runNr);
ofstream idsFXSfile;
idsFXSfile.open(idsFXSFileName.Data());
+ // store dead+inactive pixels in DB, used as starting point for later runs
+#ifndef SPD_DA_OFF
+ printf("store previous dead in DB , %ld\n",time(NULL) - timeStamp);
+ for (UInt_t eq=0; eq<20; eq++) {
+ Int_t storePreviousDead_status = 0;
+ TString idpd = Form("spd_previous_dead_%d",eq);
+ TString fileName = Form("%s/SPD_Dead_%d.root",saveDirDead,eq);
+ storePreviousDead_status = daqDA_DB_storeFile(fileName.Data(),idpd.Data());
+ // printf("daqDA_DB_storeFile(%s,%s)\n",fileName.Data(),idpd.Data());
+ if (storePreviousDead_status) {
+ printf("SPD DA ERROR: Failed to store dead file %s in daqDetDB: status=%d.\n",idpd.Data(),storePreviousDead_status);
+ }
+ }
+#endif
+
+
// send (dead) reference data for this run to FXS - only if there is no chip in category "needsMoreStat"
- if (nrEnoughStatChips+nrDeadChips+nrInefficientChips == nrEqActiveDead*60) {
- printf("Dead calibration is complete.\n"); // calibration is complete
- printf("Preparing dead reference data\n");
+ if (nrEnoughStatChips>0 && nrEnoughStatChips+nrDeadChips+nrInefficientChips == 1200) {
+ printf("SPD DA: Dead calibration is complete.\n");
+ printf("SPD DA: Preparing dead reference data\n");
// send reference data for dead pixels to FXS
TString tarFiles = "";
for (UInt_t eq=0; eq<20; eq++) {
if (eqActiveDead[eq]) {
- printf("Preparing dead pixels for eq %d\n",eq);
+ printf("SPD DA: Preparing dead pixels for eq %d\n",eq);
// move file to ref dir
TString fileName = Form("%s/SPDphys_dead_run_0_0_eq_%d.root",saveDirDeadRefTmp,eq);
TString newFileName = Form("%s/SPDphys_dead_run_%d_%d_eq_%d.root",saveDirDeadRef,firstRunNrDead,runNr,eq);
TString command = Form("mv -f %s %s",fileName.Data(),newFileName.Data());
system(command.Data());
-
tarFiles.Append(Form("SPDphys_dead_run_%d_%d_eq_%d.root ",firstRunNrDead,runNr,eq));
+ // create empty hitmap file to send to DB later
+ AliITSOnlineSPDphys* physObj = new AliITSOnlineSPDphys(fileName.Data());
+ physObj->SetEqNr(eq);
+ delete physObj;
}
}
- TString send_command = Form("cd %s; tar -cf ref_phys_dead.tar %s",saveDirDeadRef,tarFiles.Data());
- system(send_command.Data());
- TString fileName = Form("%s/ref_phys_dead.tar",saveDirDeadRef);
- TString id = "SPD_ref_phys_dead";
+ if (tarFiles.Length() > 0) { // make sure there are some files to send
+ TString send_command = Form("cd %s; tar -cf ref_phys_dead.tar %s",saveDirDeadRef,tarFiles.Data());
+ system(send_command.Data());
+ TString fileName = Form("%s/ref_phys_dead.tar",saveDirDeadRef);
+ TString id = "SPD_ref_phys_dead";
#ifndef SPD_DA_OFF
- status = daqDA_FES_storeFile(fileName.Data(),id.Data());
- if (status!=0) {
- printf("Failed to export file %s , status %d\n",fileName.Data(),status);
- return -1;
- }
+ status = daqDA_FES_storeFile(fileName.Data(),id.Data());
+ if (status!=0) {
+ printf("SPD DA ERROR: Failed to export file %s , status %d\n",fileName.Data(),status);
+ nrErrors++;
+ }
#endif
- idsFXSfile << Form("%s\n",id.Data());
+ idsFXSfile << Form("%s\n",id.Data());
+ }
+ }
+
+ // store hitmaps (maybe empty) in DB, used as starting point for later runs:
+#ifndef SPD_DA_OFF
+ printf("store previous hitmaps in DB , %ld\n",time(NULL) - timeStamp);
+ for (UInt_t eq=0; eq<20; eq++) {
+ Int_t storePreviousHitmap_status = 0;
+ TString idph = Form("spd_previous_hitmap_%d",eq);
+ TString fileName = Form("%s/SPDphys_dead_run_0_0_eq_%d.root",saveDirDeadRefTmp,eq);
+ storePreviousHitmap_status = daqDA_DB_storeFile(fileName.Data(),idph.Data());
+ // printf("daqDA_DB_storeFile(%s,%s)\n",fileName.Data(),idph.Data());
+ if (storePreviousHitmap_status) {
+ printf("SPD DA ERROR: Failed to store hitmap file %s in daqDetDB: status=%d.\n",idph.Data(),storePreviousHitmap_status);
+ }
}
+#endif
+
// send (noisy) reference data for this run to FXS
- printf("Preparing noisy reference data\n");
+ // printf("SPD DA: Preparing physics reference data for this run\n");
+ printf("SPD DA: Preparing physics reference data for this run , %ld\n",time(NULL) - timeStamp);
TString tarFiles = "";
for (UInt_t eq=0; eq<20; eq++) {
if (eqActiveNoisy[eq]) {
tarFiles.Append(Form("SPDphys_run_%d_eq_%d.root ",runNr,eq));
}
}
- TString send_command = Form("cd %s; tar -cf ref_phys.tar %s",saveDirNoisyRef,tarFiles.Data());
- system(send_command.Data());
- TString fileName = Form("%s/ref_phys.tar",saveDirNoisyRef);
- TString id = "SPD_ref_phys";
+ if (tarFiles.Length() > 0) { // make sure there are any files to send
+ TString send_command = Form("cd %s; tar -cf ref_phys.tar %s",saveDirNoisyRef,tarFiles.Data());
+ system(send_command.Data());
+ TString fileName = Form("%s/ref_phys.tar",saveDirNoisyRef);
+ TString id = "SPD_ref_phys";
#ifndef SPD_DA_OFF
- status = daqDA_FES_storeFile(fileName.Data(),id.Data());
- if (status!=0) {
- printf("Failed to export file %s , status %d\n",fileName.Data(),status);
- return -1;
- }
+ status = daqDA_FES_storeFile(fileName.Data(),id.Data());
+ if (status!=0) {
+ printf("SPD DA ERROR: Failed to export file %s , status %d\n",fileName.Data(),status);
+ nrErrors++;
+ }
#endif
- idsFXSfile << Form("%s\n",id.Data());
+ idsFXSfile << Form("%s\n",id.Data());
+ }
+
// send dead pixels to FXS
- printf("Preparing dead files\n");
+ // printf("SPD DA: Preparing dead files for FXS\n");
+ printf("SPD DA: Preparing dead files for FXS , %ld\n",time(NULL) - timeStamp);
// send a tared file of all the dead files
- send_command = Form("cd %s; tar -cf dead_phys.tar *",saveDirDeadToFXS);
+ TString send_command = Form("cd %s; tar -cf dead_phys.tar *",saveDirDeadToFXS);
// printf("\n\n%s\n\n",command.Data());
system(send_command.Data());
- fileName = Form("%s/dead_phys.tar",saveDirDeadToFXS);
- id = "SPD_phys_dead";
+ TString fileName = Form("%s/dead_phys.tar",saveDirDeadToFXS);
+ TString id = "SPD_phys_dead";
#ifndef SPD_DA_OFF
Int_t send_status = daqDA_FES_storeFile(fileName.Data(),id.Data());
if (send_status!=0) {
- printf("Failed to export file %s , status %d\n",fileName.Data(),send_status);
- return -1;
+ printf("SPD DA ERROR: Failed to export file %s , status %d\n",fileName.Data(),send_status);
+ nrErrors++;
}
#endif
idsFXSfile << Form("%s\n",id.Data());
+
// send noisy pixels to FXS
- if (handler->GetNrNoisy()>0) { // there must be at least one file created
- printf("Preparing noisy files\n");
+ if (nrNoisyFilesProduced > 0) { // make sure there is at least one file created
+ // printf("SPD DA: Preparing noisy files for FXS\n");
+ printf("SPD DA: Preparing noisy files for FXS , %ld\n",time(NULL) - timeStamp);
// send a tared file of all the noisy files
TString command = Form("cd %s; tar -cf noisy_phys.tar *",saveDirNoisyToFXS);
// printf("\n\n%s\n\n",command.Data());
#ifndef SPD_DA_OFF
status = daqDA_FES_storeFile(fileName.Data(),id.Data());
if (status!=0) {
- printf("Failed to export file %s , status %d\n",fileName.Data(),status);
- return -1;
+ printf("SPD DA ERROR: Failed to export file %s , status %d\n",fileName.Data(),status);
+ nrErrors++;
}
#endif
idsFXSfile << Form("%s\n",id.Data());
}
+
// send ids file to FXS
idsFXSfile.close();
id = "SPD_id_list";
#ifndef SPD_DA_OFF
status = daqDA_FES_storeFile(idsFXSFileName.Data(),id.Data());
if (status!=0) {
- printf("Failed to export file %s , status %d\n",idsFXSFileName.Data(),status);
- return -1;
+ printf("SPD DA ERROR: Failed to export file %s , status %d\n",idsFXSFileName.Data(),status);
+ nrErrors++;
}
#endif
delete handler;
+ printf("SPD DA: End of all operations, %d errors, %ld\n", nrErrors, time(NULL) - timeStamp);
+
+ if (nrErrors>0) return -1;
return 0;
+
}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff