#include "AliITSOnlineSPDscanMultiple.h"
#include "AliITSOnlineSPDscanMeanTh.h"
#include "AliITSOnlineSPDscanAnalyzer.h"
+#include "AliITSOnlineCalibrationSPDhandler.h"
#include "AliLog.h"
#include <iostream>
#include <fstream>
#include <TROOT.h>
#include <TPluginManager.h>
-
+#include <TObjArray.h>
+#include <TString.h>
int main(int argc, char **argv) {
if (argc<2) {
system("mkdir ./calibResults >& /dev/null");
system("mkdir ./calibResults/Noisy >& /dev/null");
system("mkdir ./calibResults/NoisyToFXS >& /dev/null");
+ system("mkdir ./calibResults/DCSconfigToFXS >& /dev/null");
system("mkdir ./calibResults/Parameters >& /dev/null");
system("mkdir ./calibResults/Reference >& /dev/null");
char *saveDirNoisy = "./calibResults/Noisy";
-#ifndef SPD_DA_OFF
char *saveDirNoisyToFXS = "./calibResults/NoisyToFXS";
-#endif
+ char *saveDirDCSconfigToFXS= "./calibResults/DCSconfigToFXS";
char *saveDirParameters = "./calibResults/Parameters";
char *saveDirRef = "./calibResults/Reference";
+ char *paramsFileName = "./standal_params.txt";
+ char *permNoisyFileName = "./perm_noisy.txt";
+
// This line is needed in case of a stand-alone application w/o
// $ROOTSYS/etc/system.rootrc file
gROOT->GetPluginManager()->AddHandler("TVirtualStreamerInfo",
enum calib_types{MINTH,MEANTH,DAC,UNIMA,NOISE,DELAY};
- // ********* STEP 1: Produce scan container files. ***********************************
+ // ********* STEP 0: Get configuration files from db (if there are any) *******************************
+ UInt_t nrTuningParams = 0;
+ TObjArray paramNames; paramNames.SetOwner(kTRUE);
+ TObjArray paramVals; paramVals.SetOwner(kTRUE);
+
+ // tuning parameters:
+ Int_t status = 0;
+#ifndef SPD_DA_OFF
+ TString idp = "spd_standal_params";
+ status=daqDA_DB_getFile(idp.Data(),paramsFileName);
+ if (status) {
+ printf("Failed to get config file %s: status=%d. Using default tuning parameters.\n",idp.Data(),status);
+ }
+#endif
+ if (status==0) {
+ ifstream paramsFile;
+ paramsFile.open(paramsFileName, ifstream::in);
+ if (paramsFile.fail()) {
+ printf("No config file (%s) present. Using default tuning parameters.\n",paramsFileName);
+ }
+ else {
+ while(1) {
+ Char_t paramN[50];
+ Char_t paramV[50];
+ paramsFile >> paramN;
+ if (paramsFile.eof()) break;
+ paramsFile >> paramV;
+ TString* paramNS = new TString(paramN);
+ TString* paramVS = new TString(paramV);
+ paramNames.AddAtAndExpand((TObject*)paramNS,nrTuningParams);
+ paramVals.AddAtAndExpand((TObject*)paramVS,nrTuningParams);
+ nrTuningParams++;
+ if (paramsFile.eof()) break;
+ }
+ paramsFile.close();
+ }
+ }
+ // for (UInt_t i=0; i<nrTuningParams; i++) {
+ // printf("Entry %d: N=%s , V=%s\n",i,((TString*)paramNames.At(i))->Data(),((TString*)paramVals.At(i))->Data());
+ // }
+
+ // perm noisy list:
+ Int_t permstatus = 0;
+#ifndef SPD_DA_OFF
+ TString idn = "spd_perm_noisy";
+ permstatus=daqDA_DB_getFile(idn.Data(),permNoisyFileName);
+ if (permstatus) {
+ printf("Failed to get config file %s: status=%d. No additional noisy pixels added.\n",idn.Data(),permstatus);
+ }
+#endif
+
+
+
+
+ // ********* STEP 1: Produce scan container files (Reference Data). ***********************************
int startSeg = 1;
#ifndef SPD_DA_OFF
startSeg = 2;
#endif
-#ifndef SPD_DA_OFF
- UInt_t nrNoisyFilesProduced=0;
-#endif
-
// container objects
AliITSOnlineSPDscan *scanObj[20];
Bool_t bScanInit[20];
if (!bScanInit[eqId]) {
// initialize container object
- Char_t fileName[200];
- sprintf(fileName,"%s/SPDcal_run_%d_eq_%d.root",saveDirRef,runNr,eqId);
+ TString fileName = Form("%s/SPDcal_run_%d_eq_%d.root",saveDirRef,runNr,eqId);
switch (type[eqId]) {
case NOISE:
case UNIMA:
- scanObj[eqId] = new AliITSOnlineSPDscanSingle(fileName);
+ scanObj[eqId] = new AliITSOnlineSPDscanSingle(fileName.Data());
((AliITSOnlineSPDscanSingle*)scanObj[eqId])->ClearThis();
bScanInit[eqId]=kTRUE;
break;
case MINTH:
case DAC:
case DELAY:
- scanObj[eqId] = new AliITSOnlineSPDscanMultiple(fileName);
+ scanObj[eqId] = new AliITSOnlineSPDscanMultiple(fileName.Data());
scanObj[eqId]->ClearThis();
bScanInit[eqId]=kTRUE;
break;
case MEANTH:
- scanObj[eqId] = new AliITSOnlineSPDscanMeanTh(fileName);
+ scanObj[eqId] = new AliITSOnlineSPDscanMeanTh(fileName.Data());
scanObj[eqId]->ClearThis();
bScanInit[eqId]=kTRUE;
break;
}
-
+
if (bScanInit[eqId]) {
while (str->Next()) {
UInt_t hs = str->GetHalfStaveNr();
UInt_t chip = str->GetChipAddr();
+ //***remove last condition when minthpresent put correctly in calib header?
#ifndef SPD_DA_OFF
- if (type[eqId]!=MINTH || minTHchipPresent[eqId][chip]) {
+ if (type[eqId]!=MINTH || minTHchipPresent[eqId][chip] || runNr<=416900) {
#else
- if (type[eqId]!=MINTH || minTHchipPresent[eqId][chip] || runNr<=416900) {
+ if (type[eqId]!=MINTH || minTHchipPresent[eqId][chip] || runNr<=416900) {
#endif
+ //*************************************************************************
scanObj[eqId]->IncrementHits(currentStep[eqId],hs,chip,str->GetChipCol(),str->GetChipRow());
-
+
if (!hitEventHSIncremented[hs]) {
scanObj[eqId]->IncrementHitEventsTot(currentStep[eqId],hs);
hitEventHSIncremented[hs]=kTRUE;
- // ********* STEP 2: Analyze scan container files. ***********************************
-#ifndef SPD_DA_OFF
- // clear noisyToFXS dir:
- Char_t command[200];
- sprintf(command,"cd %s; rm -f *",saveDirNoisyToFXS);
- system(command);
-#endif
+ // ********* STEP 2: Analyze scan container files. ************************************************
+
+ // clear noisyToFXS and DCSconfigToFXS dirs:
+ TString command = Form("cd %s; rm -f *",saveDirNoisyToFXS);
+ system(command.Data());
+ TString command2 = Form("cd %s; rm -f *",saveDirDCSconfigToFXS);
+ system(command2.Data());
+ UInt_t nrNoisyFilesProduced=0;
+ UInt_t nrDCSconfigFilesProduced=0;
AliITSOnlineSPDscanAnalyzer *analyzer;
// *** *** *** start loop over equipments (eq_id)
for (int eqId=0; eqId<20; eqId++) {
- Char_t fileName[200];
- sprintf(fileName,"%s/SPDcal_run_%d_eq_%d.root",saveDirRef,runNr,eqId);
- analyzer = new AliITSOnlineSPDscanAnalyzer(fileName);
+ // create analyzer for this eq
+ TString fileName = Form("%s/SPDcal_run_%d_eq_%d.root",saveDirRef,runNr,eqId);
+ analyzer = new AliITSOnlineSPDscanAnalyzer(fileName.Data());
+
+ // configure analyzer with tuning parameters etc:
+ for (UInt_t i=0; i<nrTuningParams; i++) {
+ analyzer->SetParam(((TString*)paramNames.At(i))->Data(),((TString*)paramVals.At(i))->Data());
+ }
Int_t type = analyzer->GetType();
Int_t dacId = analyzer->GetDacId();
}
else printf("SPD calibrator Step2: eqId %d type %d\n",eqId,type);
}
+
-
-
+ // algorithms for the different types of scans:
if (type==UNIMA) {
+
}
+
else if (type==NOISE) {
if (analyzer->ProcessNoisyPixels(saveDirNoisy)) {
- for (UInt_t module=0; module<240; module++) {
+ // init dcs config text file
+ TString dcsConfigFileName = Form("%s/dcsConfig_run_%d_eq_%d.txt",saveDirDCSconfigToFXS,runNr,eqId);
+ ofstream dcsfile;
+ dcsfile.open(dcsConfigFileName.Data());
+ dcsfile << "[SPD SCAN]\n";
+ dcsfile << "RunNumber=" << runNr << "\n";
+ dcsfile << "Type=" << type << "\n";
+ dcsfile << "ActualDetCoonfiguration=" << "0,-1,-1\n"; // dummy values for now
+ dcsfile << "[NOISY]\n";
+ nrDCSconfigFilesProduced++;
+ for (UInt_t iModule=0; iModule<12; iModule++) {
+ UInt_t module = AliITSRawStreamSPD::GetModuleNumber(eqId,iModule);
+ AliITSOnlineCalibrationSPDhandler *handler = analyzer->GetOnlineCalibrationHandler(module);
+ if (permstatus==0) { // add permanent noisy list
+ UInt_t newNoisy = handler->ReadNoisyFromText(permNoisyFileName);
+ if (newNoisy>0) {
+ printf("%d additional noisy pixels added from permanent list.\n",newNoisy);
+ }
+ }
if (analyzer->SaveDeadNoisyPixels(module,saveDirNoisy)) {
-#ifndef SPD_DA_OFF
+ UInt_t nrNoisy = handler->GetNrNoisy(module);
+ UInt_t headkey=20*10*6;
+ for (UInt_t ind=0; ind<nrNoisy; ind++) {
+ UInt_t newkey = handler->GetNoisyEqIdAt(module,ind)*10*6 +
+ handler->GetNoisyHSAt(module,ind)*10 +
+ handler->GetNoisyChipAt(module,ind);
+ if (newkey!=headkey) { // print eqId,hs,chip_header
+ headkey = newkey;
+ dcsfile << "-" << newkey/(6*10) << "," << (newkey%(6*10))/10 << "," << (newkey%(6*10))%10 << "\n";
+ }
+ dcsfile << handler->GetNoisyColAt(module,ind) << "," << handler->GetNoisyRowAt(module,ind) << "\n";
+ }
nrNoisyFilesProduced++;
- Char_t command[100];
- sprintf(command,"cp %s/SPD_DeadNoisy_%d.root %s/.",saveDirNoisy,module,saveDirNoisyToFXS);
- system(command);
-#endif
+ TString command = Form("cp %s/SPD_DeadNoisy_%d.root %s/.",saveDirNoisy,module,saveDirNoisyToFXS);
+ system(command.Data());
}
}
+ dcsfile.close();
}
}
-// else if (type==DAC && dacId==42) {
-// Char_t ofileName[100];
-// sprintf(ofileName,"%s/delay_eq_%d.txt",saveDirParameters,eqId);
-// ofstream ofile;
-// ofile.open (ofileName);
-// for (UInt_t hs=0; hs<6; hs++) {
-// for (UInt_t chipNr=0; chipNr<10; chipNr++) {
-// ofile << analyzer->GetDelay(hs,chipNr);
-// ofile << "\t";
-// }
-// ofile << "\n";
-// }
-// ofile.close();
-//#ifndef SPD_DA_OFF
-// Char_t id[20];
-// sprintf(id,"SPD_delay_%d",eqId);
-// Int_t status = daqDA_FES_storeFile(ofileName,id);
-// if (status) {
-// printf("Failed to export file %s , status %d\n",ofileName,status);
-// }
-//#endif
-// }
+
else if (type==MINTH || (type==DAC && dacId==39)) {
- Char_t ofileName[100];
- sprintf(ofileName,"%s/minth_eq_%d.txt",saveDirParameters,eqId);
+ // init dcs config text file
+ TString dcsConfigFileName = Form("%s/dcsConfig_run_%d_eq_%d.txt",saveDirDCSconfigToFXS,runNr,eqId);
+ ofstream dcsfile;
+ dcsfile.open(dcsConfigFileName.Data());
+ dcsfile << "[SPD SCAN]\n";
+ dcsfile << "RunNumber=" << runNr << "\n";
+ dcsfile << "Type=" << type << "\n";
+ dcsfile << "ActualDetCoonfiguration=" << "0,-1,-1\n"; // dummy values for now
+ dcsfile << "[DACvalues]\n";
+ nrDCSconfigFilesProduced++;
+ TString ofileName = Form("%s/minth_eq_%d.txt",saveDirParameters,eqId);
ofstream ofile;
- ofile.open (ofileName);
+ ofile.open (ofileName.Data());
for (UInt_t hs=0; hs<6; hs++) {
for (UInt_t chipNr=0; chipNr<10; chipNr++) {
- ofile << analyzer->GetMinTh(hs,chipNr);
+ Int_t minTh = -1;
+ if (analyzer->GetOnlineScan()->GetChipPresent(hs,chipNr)) {
+ minTh = analyzer->GetMinTh(hs,chipNr);
+ if (minTh!=-1) {
+ dcsfile << "39," << eqId << "," << hs << "," << chipNr << "=" << minTh << "\n";
+ }
+ else {
+ printf("MinTh failed for Eq %d , HS %d , Chip %d\n",eqId,hs,chipNr);
+ }
+ }
+ ofile << minTh;
ofile << "\t";
}
ofile << "\n";
}
ofile.close();
-#ifndef SPD_DA_OFF
- Char_t id[20];
- sprintf(id,"SPD_minth_%d",eqId);
- Int_t status = daqDA_FES_storeFile(ofileName,id);
- if (status) {
- printf("Failed to export file %s , status %d\n",ofileName,status);
- }
-#endif
+ dcsfile.close();
}
+
else if (type==DELAY) {
- Char_t ofileName[100];
- sprintf(ofileName,"%s/delay_eq_%d.txt",saveDirParameters,eqId);
+ // init dcs config text file
+ TString dcsConfigFileName = Form("%s/dcsConfig_run_%d_eq_%d.txt",saveDirDCSconfigToFXS,runNr,eqId);
+ ofstream dcsfile;
+ dcsfile.open(dcsConfigFileName.Data());
+ dcsfile << "[SPD SCAN]\n";
+ dcsfile << "RunNumber=" << runNr << "\n";
+ dcsfile << "Type=" << type << "\n";
+ dcsfile << "ActualDetCoonfiguration=" << "0,-1,-1\n"; // dummy values for now
+ dcsfile << "[DACvalues]\n";
+ nrDCSconfigFilesProduced++;
+ TString ofileName = Form("%s/delay_eq_%d.txt",saveDirParameters,eqId);
ofstream ofile;
- ofile.open (ofileName);
+ ofile.open (ofileName.Data());
for (UInt_t hs=0; hs<6; hs++) {
for (UInt_t chipNr=0; chipNr<10; chipNr++) {
- UInt_t clockCycle = analyzer->GetDelay(hs,chipNr);
- UInt_t delayCtrl = clockCycle/2;
- UInt_t miscCtrl = 192;
- if (clockCycle%2==1) miscCtrl = 128;
+ Int_t clockCycle = -1;
+ Int_t delayCtrl = -1;
+ Int_t miscCtrl = -1;
+ if (analyzer->GetOnlineScan()->GetChipPresent(hs,chipNr)) {
+ clockCycle = analyzer->GetDelay(hs,chipNr);
+ delayCtrl = clockCycle/2;
+ miscCtrl = 192;
+ if (clockCycle!=-1) {
+ if (clockCycle%2==1) miscCtrl = 128;
+ dcsfile << "42," << eqId << "," << hs << "," << chipNr << "=" << delayCtrl << "\n";
+ dcsfile << "43," << eqId << "," << hs << "," << chipNr << "=" << miscCtrl << "\n";
+ }
+ else {
+ printf("Delay failed for Eq %d , HS %d , Chip %d\n",eqId,hs,chipNr);
+ }
+ }
ofile << delayCtrl << "/" << miscCtrl;
ofile << "\t";
}
ofile << "\n";
}
ofile.close();
-#ifndef SPD_DA_OFF
- Char_t id[20];
- sprintf(id,"SPD_delay_%d",eqId);
- Int_t status = daqDA_FES_storeFile(ofileName,id);
- if (status) {
- printf("Failed to export file %s , status %d\n",ofileName,status);
- }
-#endif
+ dcsfile.close();
}
-
delete analyzer;
#ifndef SPD_DA_OFF
// *** *** *** end loop over equipments (eq_id)
-#ifndef SPD_DA_OFF
if (nrNoisyFilesProduced>0) {
// send a tared file of all new noisy maps
- sprintf(command,"cd %s; tar -cf noisy.tar *",saveDirNoisyToFXS);
- printf("\n\n%s\n\n",command);
- system(command);
- Char_t fileName[200];
- sprintf(fileName,"%s/noisy.tar",saveDirNoisyToFXS);
- Char_t id[20];
- sprintf(id,"SPD_noisy");
- Int_t status = daqDA_FES_storeFile(fileName,id);
+ TString command = Form("cd %s; tar -cf noisy.tar *",saveDirNoisyToFXS);
+ printf("\n\n%s\n\n",command.Data());
+ system(command.Data());
+#ifndef SPD_DA_OFF
+ TString fileName = Form("%s/noisy.tar",saveDirNoisyToFXS);
+ TString id = "SPD_noisy";
+ Int_t status = daqDA_FES_storeFile(fileName.Data(),id.Data());
if (status!=0) {
- printf("Failed to export file %s , status %d\n",fileName,status);
+ printf("Failed to export file %s , status %d\n",fileName.Data(),status);
return -1;
}
+#endif
}
+
+ if (nrDCSconfigFilesProduced>0) {
+ // send a tared file of all the dcsConfig text files
+ TString command = Form("cd %s; tar -cf dcsConfig.tar *",saveDirDCSconfigToFXS);
+ // printf("\n\n%s\n\n",command.Data());
+ system(command.Data());
+#ifndef SPD_DA_OFF
+ TString fileName = Form("%s/dcsConfig.tar",saveDirDCSconfigToFXS);
+ TString id = "SPD_dcsConfig";
+ Int_t status = daqDA_FES_storeFile(fileName.Data(),id.Data());
+ if (status!=0) {
+ printf("Failed to export file %s , status %d\n",fileName.Data(),status);
+ return -1;
+ }
#endif
+ }
+
return 0;
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff