#include <TH1F.h>
#include <TH2I.h>
#include <TGraph.h>
+#include <TExec.h>
#include <TStyle.h>
+#include <TString.h>
+#include <TSystem.h>
#include <TGrid.h>
#include <TLine.h>
#include <TCanvas.h>
//
// Origin: F. Prino (prino@to.infn.it)
-void ShowCalibrationSDD(Int_t iMod=0, Char_t *filnam="$ALICE_ROOT/ITS/Calib/CalibSDD/Run0_9999999_v0_s0.root"){
+void MakePalette(){
+ Int_t palette[3]={kGray,2,3};
+ gStyle->SetPalette(3,palette);
+}
+
+void ShowCalibrationSDD(Char_t *filnam="$ALICE_ROOT/OCDB/ITS/Calib/CalibSDD/Run0_9999999_v0_s0.root", Int_t iMod=0){
TFile *f=TFile::Open(filnam);
hlay4->GetYaxis()->SetTitle("Ladder");
hlay4->SetStats(0);
hlay4->SetMinimum(-1);
+ TH2I* hdeadlay3=new TH2I("hdlay3","Layer 3",6,-0.5,5.5,14,-0.5,13.5);
+ hdeadlay3->GetXaxis()->SetTitle("Detector");
+ hdeadlay3->GetYaxis()->SetTitle("Ladder");
+ hdeadlay3->GetXaxis()->SetTickLength(0);
+ hdeadlay3->GetYaxis()->SetTickLength(0);
+ hdeadlay3->SetStats(0);
+ hdeadlay3->SetMinimum(-1.);
+ TH2I* hdeadlay4=new TH2I("hdlay4","Layer 4",8,-0.5,7.5,22,-0.5,21.5);
+ hdeadlay4->GetXaxis()->SetTitle("Detector");
+ hdeadlay4->GetYaxis()->SetTitle("Ladder");
+ hdeadlay4->GetXaxis()->SetTickLength(0);
+ hdeadlay4->GetYaxis()->SetTickLength(0);
+ hdeadlay4->GetYaxis()->SetTitle("Ladder");
+ hdeadlay4->SetStats(0);
+ hdeadlay4->SetMinimum(-1.);
TObjArray *calSDD = (TObjArray *)ent->GetObject();
printf("Entries in array=%d\n",calSDD->GetEntriesFast());
if(i<84) badAnodeCounter3+=cal->GetDeadChannels();
else badAnodeCounter4+=cal->GetDeadChannels();
hnbadch->SetBinContent(i+1,cal->GetDeadChannels());
+ if(lay==3) hdeadlay3->SetBinContent(det,lad,cal->GetDeadChannels());
+ if(lay==4) hdeadlay4->SetBinContent(det,lad,cal->GetDeadChannels());
for(Int_t iAn=0; iAn<512; iAn++){
Int_t ic=cal->GetChip(iAn);
if(!cal->IsChipBad(ic) && !cal->IsBad() && cal->IsBadChannel(iAn)){
printf("---------------------------------------------------\n");
+ TLine* lin=new TLine(0,0,0,23);
+ TExec *ex1 = new TExec("ex1","MakePalette();");
+ TExec *ex2 = new TExec("ex2","gStyle->SetPalette(1);");
+
+ TCanvas* clay=new TCanvas("clay","Layer status",900,600);
+ clay->Divide(2,1);
+ clay->cd(1);
+ hlay3->Draw("col");
+ ex1->Draw();
+ hlay3->DrawCopy("col same");
+ for(Int_t i=0;i<6;i++){
+ lin->SetY1(-0.5);
+ lin->SetY2(13.5);
+ lin->SetX1(i+0.5);
+ lin->SetX2(i+0.5);
+ lin->DrawClone();
+ }
+ for(Int_t i=0;i<14;i++){
+ lin->SetX1(-0.5);
+ lin->SetX2(5.5);
+ lin->SetY1(i+0.5);
+ lin->SetY2(i+0.5);
+ lin->DrawClone();
+ }
+ clay->cd(2);
+ hlay4->DrawCopy("col");
+ for(Int_t i=0;i<8;i++){
+ lin->SetY1(-0.5);
+ lin->SetY2(21.5);
+ lin->SetX1(i+0.5);
+ lin->SetX2(i+0.5);
+ lin->DrawClone();
+ }
+ for(Int_t i=0;i<22;i++){
+ lin->SetX1(-0.5);
+ lin->SetX2(7.5);
+ lin->SetY1(i+0.5);
+ lin->SetY2(i+0.5);
+ lin->DrawClone();
+ }
+
TCanvas *c0=new TCanvas("c0","Module status",800,800);
c0->Divide(1,2);
c0->cd(1);
hmodstatus->GetYaxis()->SetTitle("Module status (1=OK, 0=BAD)");
c0->cd(2);
hnbadch->Draw();
- hnbadch->GetXaxis()->SetTitle("Module number");
+ hnbadch->GetXaxis()->SetTitle("Module number");
hnbadch->GetYaxis()->SetTitle("Number of bad anodes");
- TCanvas *c1=new TCanvas("c1","Anode calibration",800,800);
- c1->Divide(2,2);
- c1->cd(1);
- hbase->Draw();
- hbase->GetXaxis()->SetTitle("Baseline after equalization");
- hbase->GetXaxis()->CenterTitle();
- c1->cd(2);
- hnoise->Draw();
- hnoise->GetXaxis()->SetTitle("Noise");
- hnoise->GetXaxis()->CenterTitle();
- c1->cd(3);
- hgain->Draw();
- hgain->GetXaxis()->SetTitle("Gain");
- hgain->GetXaxis()->CenterTitle();
- c1->cd(4);
- hchstatus->Draw();
- hchstatus->GetXaxis()->SetTitle("Anode status (0=bad, 1=OK)");
- hchstatus->GetXaxis()->CenterTitle();
- Int_t palette[3]={kGray,2,3};
- gStyle->SetPalette(3,palette);
-
- TLine* lin=new TLine(0,0,0,23);
- TCanvas* clay=new TCanvas("clay","Layer status",900,600);
- clay->Divide(2,1);
- clay->cd(1);
- hlay3->Draw("col");
+
+
+
+ TCanvas *c0b=new TCanvas("c0b","Bad Channels",900,600);
+ c0b->Divide(2,1);
+ c0b->cd(1);
+ hdeadlay3->DrawCopy("colz");
+ ex2->Draw();
+ hdeadlay3->DrawCopy("colz same");
for(Int_t i=0;i<6;i++){
lin->SetY1(-0.5);
lin->SetY2(13.5);
lin->SetY2(i+0.5);
lin->DrawClone();
}
- clay->cd(2);
- hlay4->Draw("col");
+ c0b->cd(2);
+ hdeadlay4->DrawCopy("colz");
+ ex2->Draw();
+ hdeadlay4->DrawCopy("colz same");
for(Int_t i=0;i<8;i++){
lin->SetY1(-0.5);
lin->SetY2(21.5);
}
+
+ TCanvas *c1=new TCanvas("c1","Anode calibration",800,800);
+ c1->Divide(2,2);
+ c1->cd(1);
+ hbase->Draw();
+ hbase->GetXaxis()->SetTitle("Baseline after equalization");
+ hbase->GetXaxis()->CenterTitle();
+ c1->cd(2);
+ hnoise->Draw();
+ hnoise->GetXaxis()->SetTitle("Noise");
+ hnoise->GetXaxis()->CenterTitle();
+ c1->cd(3);
+ hgain->Draw();
+ hgain->GetXaxis()->SetTitle("Gain");
+ hgain->GetXaxis()->CenterTitle();
+ c1->cd(4);
+ hchstatus->Draw();
+ hchstatus->GetXaxis()->SetTitle("Anode status (0=bad, 1=OK)");
+ hchstatus->GetXaxis()->CenterTitle();
+
+
+
+
+
+
+
+
// Plot quantities for specified module
gbad->GetYaxis()->SetTitle("Anode Status (1=OK, 0=bad)");
}
-void ShowCalibrationSDD(Int_t nrun, Int_t nv, Int_t year=2009, Int_t nmod=0){
+void ShowCalibrationSDD(Int_t nrun, Int_t year=2010, Int_t nmod=0){
TGrid::Connect("alien:",0,0,"t");
- Char_t filnam[200];
- sprintf(filnam,"alien:///alice/data/%d/OCDB/ITS/Calib/CalibSDD/Run%d_999999999_v%d_s0.root",year,nrun,nv);
- printf("Open file: %s\n",filnam);
- ShowCalibrationSDD(nmod,filnam);
+ TString cmd=Form("gbbox find \"/alice/data/%d/OCDB/ITS/Calib/CalibSDD\" \"Run%d*.root\" > run.txt",year,nrun);
+ gSystem->Exec(cmd.Data());
+ Char_t filnam[200],filnamalien[200];
+ FILE* runtxt=fopen("run.txt","r");
+ fscanf(runtxt,"%s\n",filnam);
+ if(!strstr(filnam,"/alice/data/")){
+ printf("Bad run number\n");
+ gSystem->Exec("rm run.txt");
+ return;
+ }
+ sprintf(filnamalien,"alien://%s",filnam);
+
+ printf("Open file: %s\n",filnamalien);
+ ShowCalibrationSDD(filnamalien,nmod);
+ fclose(runtxt);
+ gSystem->Exec("rm run.txt");
}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff