#include "AliMUONTransientDigit.h"
#include "AliMUONTriggerCircuit.h"
#include "AliMUONGeometryBuilder.h"
+#include "AliMUONCommonGeometryBuilder.h"
#include "AliMUONVGeometryBuilder.h"
+#include "AliMUONGeometryDEIndexing.h"
+#include "AliMUONGeometrySegmentation.h"
#include "AliMUONDigitizerv2.h"
#include "AliMUONSDigitizerv1.h"
#include "AliMUONRawData.h"
+#include "AliMUONFactoryV2.h"
+#include "AliLog.h"
// Defaults parameters for Z positions of chambers
// taken from values for "stations" in AliMUON::AliMUON
fChambers(0),
fTriggerCircuits(0),
fGeometryBuilder(0),
+ fSegmentationType(2),// set to 2 default wise new seg
+ fDEIndexing(0),
fAccCut(kFALSE),
fAccMin(0.),
fAccMax(0.),
fMaxDestepAlu(0.),
fMaxIterPad(0),
fCurIterPad(0),
- fMerger(0)
+ fMerger(0),
+ fFactory(0)
{
// Default Constructor
//
fChambers(0),
fTriggerCircuits(0),
fGeometryBuilder(0),
+ fSegmentationType(2),// set to 2 default wise new seg
+ fDEIndexing(0),
fAccCut(kFALSE),
fAccMin(0.),
fAccMax(0.),
fMaxDestepAlu(-1), // in the calculation of the tracking parameters
fMaxIterPad(0),
fCurIterPad(0),
- fMerger(0)
+ fMerger(0),
+ fFactory(0)
{
fIshunt = 0;
SetMarkerColor(kRed);//
+
+ // Geometry builder
+ fGeometryBuilder = new AliMUONGeometryBuilder(this);
+
+ // Common geometry definitions
+ fGeometryBuilder
+ ->AddBuilder(new AliMUONCommonGeometryBuilder(this));
+
+ // Define the global transformation:
+ // Transformation from the old ALICE coordinate system to a new one:
+ // x->-x, z->-z
+ TGeoRotation* rotGlobal
+ = new TGeoRotation("rotGlobal", 90., 180., 90., 90., 180., 0.);
+ fGeometryBuilder
+ ->SetGlobalTransformation (TGeoCombiTrans(0., 0., 0., rotGlobal));
+
+ // Detection elements indexing
+ fDEIndexing = new AliMUONGeometryDEIndexing();
+
//
// Creating List of Chambers
Int_t ch;
//
chamber->InitGeo(AliMUONConstants::DefaultChamberZ(ch));
// Set chamber inner and outer radius to default
- chamber->SetRInner(AliMUONConstants::Dmin(st)/2);
- chamber->SetROuter(AliMUONConstants::Dmax(st)/2);
+ chamber->SetRInner(AliMUONConstants::Dmin(st)/2.);
+ chamber->SetROuter(AliMUONConstants::Dmax(st)/2.);
//
} // Chamber stCH (0, 1) in
} // Station st (0...)
for (Int_t circ=0; circ<AliMUONConstants::NTriggerCircuit(); circ++) {
fTriggerCircuits->AddAt(new AliMUONTriggerCircuit(),circ);
}
-
- // Geometry builder
- fGeometryBuilder = new AliMUONGeometryBuilder(this);
}
//____________________________________________________________________
{
// Protected copy constructor
- Fatal("AliMUONMergerModule", "Not implemented.");
+ AliFatal("Not implemented.");
}
//____________________________________________________________________
AliMUON::~AliMUON()
{
// Destructor
- if(fDebug) printf("%s: Calling AliMUON destructor !!!\n",ClassName());
+ AliDebug(1,"Calling AliMUON destructor");
fIshunt = 0;
if (fMerger) delete fMerger;
}
delete fMUONData;
delete fGeometryBuilder;
+ delete fDEIndexing;
+ delete fFactory;
}
//________________________________________________________________________
if (this == &rhs) return *this;
- Fatal("operator=", "Not implemented.");
+ AliFatal("Not implemented.");
return *this;
}
{
// Geometry for event display
- for (Int_t i=0; i<7; i++) {
- for (Int_t j=0; j<2; j++) {
- Int_t id=2*i+j+1;
- this->Chamber(id-1).SegmentationModel(1)->Draw("eventdisplay");
- }
- }
+ if (!fSegmentationType) {
+ AliFatal("No Segmentation Type defined.");
+ return;
+ }
+
+
+// for (Int_t i = 0; i < AliMUONConstants::NCh(); i++)
+// this->Chamber(i).SegmentationModel2(1)->Draw("eventdisplay");// to be check !
+
+
}
//__________________________________________________________________
fHits = GetMUONData()->Hits(); // Added by Ivana to use the methods FisrtHit, NextHit of AliDetector
}
-//____________________________________________________________________
-void AliMUON::SetPadSize(Int_t id, Int_t isec, Float_t p1, Float_t p2)
-{
-// Set the pad size for chamber id and cathode isec
- Int_t i=2*(id-1);
- ((AliMUONChamber*) fChambers->At(i)) ->SetPadSize(isec,p1,p2);
- ((AliMUONChamber*) fChambers->At(i+1))->SetPadSize(isec,p1,p2);
-}
-
//___________________________________________
void AliMUON::SetChambersZ(const Float_t *Z)
{
fMaxDestepAlu=p1;
}
-//___________________________________________________________________
-void AliMUON::SetAcceptance(Bool_t acc, Float_t angmin, Float_t angmax)
-{
-// Set acceptance cuts
- fAccCut=acc;
- fAccMin=angmin*TMath::Pi()/180;
- fAccMax=angmax*TMath::Pi()/180;
- Int_t ch;
- if (acc) {
- for (Int_t st = 0; st < AliMUONConstants::NCh() / 2; st++) {
- // Loop over 2 chambers in the station
- for (Int_t stCH = 0; stCH < 2; stCH++) {
- ch = 2 * st + stCH;
- // Set chamber inner and outer radius according to acceptance cuts
- Chamber(ch).SetRInner(TMath::Abs(AliMUONConstants::DefaultChamberZ(ch)*TMath::Tan(fAccMin)));
- Chamber(ch).SetROuter(TMath::Abs(AliMUONConstants::DefaultChamberZ(ch)*TMath::Tan(fAccMax)));
- } // chamber loop
- } // station loop
- }
-}
-
//____________________________________________________________________
Float_t AliMUON::GetMaxStepGas() const
{
}
//____________________________________________________________________
-void AliMUON::SetSegmentationModel(Int_t id, Int_t isec, AliSegmentation *segmentation)
+ void AliMUON::SetAlign(Bool_t align)
+{
+ // Sets option for alignement to geometry builder
+
+ fGeometryBuilder->SetAlign(align);
+}
+
+//____________________________________________________________________
+void AliMUON::SetSegmentationModel(Int_t id, Int_t isec, AliMUONGeometrySegmentation* segmentation)
{
// Set the segmentation for chamber id cathode isec
((AliMUONChamber*) fChambers->At(id))->SetSegmentationModel(isec, segmentation);
// write TreeD here
if (!fMerger) {
- if (gAlice->GetDebug()>0) {
- cerr<<"AliMUON::SDigits2Digits: create default AliMUONMerger "<<endl;
- cerr<<" no merging, just digitization of 1 event will be done"<<endl;
- }
- fMerger = new AliMUONMerger();
+ AliDebug(1,"Create default AliMUONMerger ");
+ AliDebug(1," no merging, just digitization of 1 event will be done");
+ fMerger = new AliMUONMerger();
}
fMerger->Init();
fMerger->Digitise();
AliMUONRawData* rawData;
rawData = new AliMUONRawData(fLoader);
- if (!rawData->WriteRawData()) Info("MUON","pb writting raw data");
+ if (!rawData->WriteRawData()) AliInfo("pb writting raw data");
delete rawData;
return;
}
//builds standard getter (AliLoader type)
//if detector wants to use castomized getter, it must overload this method
- if (GetDebug())
- Info("MakeLoader",
- "Creating standard getter for detector %s. Top folder is %s.",
- GetName(),topfoldername);
+
+ AliDebug(1,Form("Creating standard getter for detector %s. Top folder is %s.",
+ GetName(),topfoldername));
fLoader = new AliLoader(GetName(),topfoldername);
fMUONData = new AliMUONData(fLoader,GetName(),GetName());
fMUONData->SetSplitLevel(fSplitLevel);
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff