#include "AliMUONVCalibParam.h"
#include "AliMUONVDigitStore.h"
#include "AliMUONGeometryTransformer.h" //ADDED for trigger noise
+#include "AliMUONRecoParam.h"
#include "AliMUONTriggerChamberEfficiency.h"
#include "AliMUONTriggerUtilities.h"
//-----------------------------------------------------------------------------
/// \class AliMUONDigitizerV3
+///
/// The digitizer is performing the transformation to go from SDigits (digits
/// w/o any electronic noise) to Digits (w/ electronic noise, and decalibration)
///
/// (for performance reason mainly, and because anyway we know we have to do it
/// here, at the digitization level).
///
+/// August 2011. In order to remove the need for specific MC OCDB storages,
+/// we're introducing a dependence of simulation on AliMUONRecoParam (stored
+/// in MUON/Calib/RecoParam in OCDB), which is normally (or conceptually, if
+/// you will) only a reconstruction object. That's not a pretty solution, but,
+/// well, we have to do it...
+/// This dependence comes from the fact that we must know how to decalibrate
+/// the digits, so that the decalibration (done here) - calibration (done during
+/// reco) process is (as much as possible) neutral.
+///
+///
/// \author Laurent Aphecetche
+///
//-----------------------------------------------------------------------------
namespace
fDigitStore(0x0),
fOutputDigitStore(0x0),
fInputDigitStores(0x0),
+fRecoParam(0x0),
fTriggerEfficiency(0x0),
fTriggerUtilities(0x0),
fEfficiencyResponse(2*AliMUONConstants::NTriggerCh()*AliMUONConstants::NTriggerCircuit())
/// - add some electronics noise (thus leading to a realistic adc), if requested to do so
/// - sets the signal to zero if below 3*sigma of the noise
- Float_t charge = digit.IsChargeInFC() ? digit.Charge()*AliMUONConstants::FC2ADC() : digit.Charge();
+ Float_t charge = digit.Charge();
+
+ if (!digit.IsChargeInFC())
+ {
+ charge *= AliMUONConstants::DefaultADC2MV()*AliMUONConstants::DefaultA0()*AliMUONConstants::DefaultCapa();
+ fLogger->Log("CHECK ME ! WAS NOT SUPPOSED TO BE HERE !!! ARE YOU RECONSTRUCTING OLD SIMULATIONS ? ");
+ AliError("CHECK ME ! WAS NOT SUPPOSED TO BE HERE !!! ARE YOU RECONSTRUCTING OLD SIMULATIONS ? ");
+ }
// We set the charge to 0, as the only relevant piece of information
// after Digitization is the ADC value.
}
Int_t adc = DecalibrateTrackerDigit(*pedestal,*gain,manuChannel,charge,addNoise,
- digit.IsNoiseOnly());
+ digit.IsNoiseOnly(),
+ fRecoParam->GetCalibrationMode());
digit.SetADC(adc);
}
Int_t channel,
Float_t charge,
Bool_t addNoise,
- Bool_t noiseOnly)
+ Bool_t noiseOnly,
+ const TString& calibrationMode)
{
/// Decalibrate (i.e. go from charge to adc) a tracker digit, given its
/// pedestal and gain parameters.
/// Must insure before calling that channel is valid (i.e. between 0 and
/// pedestals or gains->GetSize()-1, but also corresponding to a valid channel
/// otherwise results are not predictible...)
-
+ ///
+ /// This method is completely tied to what happens in its sister method :
+ /// AliMUONDigitCalibrator::CalibrateDigit, which is doing the reverse work...
+ ///
+
static const Int_t kMaxADC = (1<<12)-1; // We code the charge on a 12 bits ADC.
+ Bool_t nogain = calibrationMode.Contains("NOGAIN");
+
+ Float_t a1(0.0);
+ Int_t thres(4095);
+ Int_t qual(0xF);
+ Float_t capa(AliMUONConstants::DefaultCapa()); // capa = 0.2 and a0 = 1.25
+ Float_t a0(AliMUONConstants::DefaultA0()); // is equivalent to gain = 4 mV/fC
+ Float_t adc2mv(AliMUONConstants::DefaultADC2MV()); // 1 ADC channel = 0.61 mV
+
+ if ( ! nogain )
+ {
+ a0 = gains.ValueAsFloat(channel,0);
+ a1 = gains.ValueAsFloat(channel,1);
+ thres = gains.ValueAsInt(channel,2);
+ qual = gains.ValueAsInt(channel,3);
+ }
+
Float_t pedestalMean = pedestals.ValueAsFloat(channel,0);
Float_t pedestalSigma = pedestals.ValueAsFloat(channel,1);
AliDebugClass(1,Form("DE %04d MANU %04d CH %02d PEDMEAN %7.2f PEDSIGMA %7.2f",
pedestals.ID0(),pedestals.ID1(),channel,pedestalMean,pedestalSigma));
- Float_t a0 = gains.ValueAsFloat(channel,0);
- Float_t a1 = gains.ValueAsFloat(channel,1);
- Int_t thres = gains.ValueAsInt(channel,2);
- Int_t qual = gains.ValueAsInt(channel,3);
-
if ( qual <= 0 ) return 0;
Float_t chargeThres = a0*thres;
Float_t padc(0); // (adc - ped) value
- if ( charge <= chargeThres || TMath::Abs(a1) < 1E-12 )
+ if ( nogain || charge <= chargeThres || TMath::Abs(a1) < 1E-12 )
{
// linear part only
}
else
{
+ // FIXME: when we'll use capacitances and real gains, revise this part
+ // to take capa properly into account...
+
+ AliWarningClass("YOU PROBABLY NEED TO REVISE THIS PART OF CODE !!!");
+
// linear + parabolic part
Double_t qt = chargeThres - charge;
Double_t delta = a0*a0-4*a1*qt;
}
}
+ padc /= capa*adc2mv;
+
Int_t adc(0);
Float_t adcNoise = 0.0;
return f;
}
+//_____________________________________________________________________________
+void AliMUONDigitizerV3::SetCalibrationData(AliMUONCalibrationData* calibrationData,
+ AliMUONRecoParam* recoParam)
+{
+ fCalibrationData = calibrationData;
+ fRecoParam = recoParam;
+ if (!fRecoParam)
+ {
+ AliError("Cannot work (e.g. decalibrate) without recoparams !");
+ }
+}
+