#include "AliRecoParam.h"
#include "AliLog.h"
+#include "AliCDBManager.h"
+#include "AliCDBEntry.h"
+
#include <Riostream.h>
ClassImp(AliMUONRecoParam)
fRemoveConnectedTracksInSt12(kFALSE),
fMaxTriggerTracks(0),
fMaxTrackCandidates(0),
- fSelectTrackOnSlope(kFALSE)
-{
+ fSelectTrackOnSlope(kFALSE),
+ fMissingPadFractionLimit(-1),
+ fFractionOfBuspatchOutsideOccupancyLimit(0),
+ fAverageNoisePadCharge(0.22875),
+ fClusterChargeCut(2.0),
+ fEventSizeSoftLimit(35.0),
+ fEventSizeHardLimit(45.0),
+ fTokenLostLimit(0.0),
+ fTryRecover(kFALSE)
+{
/// Constructor
SetNameTitle("Dummy","Dummy");
+ for (Int_t iCh = 0; iCh < 10; iCh++) {
+ fUseChamber[iCh] = kTRUE;
+ fDefaultNonBendingReso[iCh] = 0.;
+ fDefaultBendingReso[iCh] = 0.;
+ }
+ for (Int_t iSt = 0; iSt < 5; iSt++) fRequestStation[iSt] = kTRUE;
SetDefaultLimits();
}
/// NOGAIN : only do pedestal subtraction
/// GAIN : do pedestal subtraction, and apply gain correction, but with a
/// single capacitance value for all channels
+ /// INJECTIONGAIN : as GAIN, but with gain values taken as EMELEC factory values
/// GAINCONSTANTCAPA : as GAIN, but with a channel-dependent capacitance value
return fCalibrationMode.Data();
return param;
}
+//_____________________________________________________________________________
+AliMUONRecoParam *AliMUONRecoParam::GetCalibrationParam()
+{
+ /// Return default (dummy) reconstruction parameters for calibration environment
+
+ AliMUONRecoParam *param = new AliMUONRecoParam();
+ param->SetCalibrationParam();
+
+ return param;
+}
+
+
//_____________________________________________________________________________
void AliMUONRecoParam::SetLowFluxParam()
{
SetNameTitle("Low Flux","Low Flux");
SetEventSpecie(AliRecoParam::kLowMult);
- fMinBendingMomentum = 1.;
- fMaxBendingMomentum = 3000.;
+ fMinBendingMomentum = 0.8;
+ fMaxBendingMomentum = 1.e10;
fMaxNonBendingSlope = 0.3;
fMaxBendingSlope = 0.4;
fSelectTrackOnSlope = kFALSE;
fMaxBendingDistanceToTrack = 1.;
fSigmaCutForTracking = 6.;
fSigmaCutForImprovement = 5.;
- fSigmaCutForTrigger = 8.;
+ fSigmaCutForTrigger = 4.;
fStripCutForTrigger = 1.;
fMaxStripAreaForTrigger = 3.;
- fMaxNormChi2MatchTrigger = 16.;
+ fMaxNormChi2MatchTrigger = fSigmaCutForTrigger * fSigmaCutForTrigger;
fCombinedClusterTrackReco = kFALSE;
fTrackAllTracks = kTRUE;
fRecoverTracks = kTRUE;
fMakeMoreTrackCandidates = kFALSE;
fComplementTracks = kTRUE;
fImproveTracks = kTRUE;
- fRemoveConnectedTracksInSt12 = kTRUE;
+ fRemoveConnectedTracksInSt12 = kFALSE;
fUseSmoother = kTRUE;
for (Int_t iCh = 0; iCh < 10; iCh++) {
fUseChamber[iCh] = kTRUE;
for (Int_t iSt = 0; iSt < 5; iSt++) fRequestStation[iSt] = kTRUE;
fBypassSt45 = 0;
fMaxTriggerTracks = 100;
- fMaxTrackCandidates = 10000;
-
+ fMaxTrackCandidates = 10000;
}
//_____________________________________________________________________________
SetNameTitle("High Flux","High Flux");
SetEventSpecie(AliRecoParam::kHighMult);
- fMinBendingMomentum = 1.;
- fMaxBendingMomentum = 3000.;
+ fMinBendingMomentum = 0.8;
+ fMaxBendingMomentum = 1.e10;
fMaxNonBendingSlope = 0.3;
fMaxBendingSlope = 0.4;
fSelectTrackOnSlope = kFALSE;
fMaxBendingDistanceToTrack = 1.;
fSigmaCutForTracking = 6.;
fSigmaCutForImprovement = 5.;
- fSigmaCutForTrigger = 8.;
+ fSigmaCutForTrigger = 4.;
fStripCutForTrigger = 1.;
fMaxStripAreaForTrigger = 3.;
- fMaxNormChi2MatchTrigger = 16.;
+ fMaxNormChi2MatchTrigger = fSigmaCutForTrigger * fSigmaCutForTrigger;
fCombinedClusterTrackReco = kFALSE;
fTrackAllTracks = kTRUE;
fRecoverTracks = kTRUE;
fBypassSt45 = 0;
fMaxTriggerTracks = 100;
fMaxTrackCandidates = 10000;
-
}
//_____________________________________________________________________________
SetNameTitle("Cosmic","Cosmic");
SetEventSpecie(AliRecoParam::kCosmic);
- fMinBendingMomentum = 1.;
- fMaxBendingMomentum = 10000000.;
- fMaxNonBendingSlope = 0.4;
- fMaxBendingSlope = 0.5;
+ fMinBendingMomentum = 0.8;
+ fMaxBendingMomentum = 1.e10;
+ fMaxNonBendingSlope = 0.3;
+ fMaxBendingSlope = 0.4;
fSelectTrackOnSlope = kTRUE;
- fNonBendingVertexDispersion = 200.;
- fBendingVertexDispersion = 200.;
+ fNonBendingVertexDispersion = 170.;
+ fBendingVertexDispersion = 170.;
fMaxNonBendingDistanceToTrack = 1.;
fMaxBendingDistanceToTrack = 1.;
fSigmaCutForTracking = 7.;
- fSigmaCutForImprovement = 7.;
- fSigmaCutForTrigger = 8.;
+ fSigmaCutForImprovement = 6.;
+ fSigmaCutForTrigger = 4.;
fStripCutForTrigger = 1.5;
fMaxStripAreaForTrigger = 3.;
- fMaxNormChi2MatchTrigger = 16.;
+ fMaxNormChi2MatchTrigger = fSigmaCutForTrigger * fSigmaCutForTrigger;
fPercentOfFullClusterInESD = 100.;
fCombinedClusterTrackReco = kFALSE;
fTrackAllTracks = kTRUE;
fDefaultNonBendingReso[iCh] = 0.4;
fDefaultBendingReso[iCh] = 0.4;
}
- for (Int_t iSt = 0; iSt < 5; iSt++) fRequestStation[iSt] = kTRUE;
+ fRequestStation[0] = kTRUE;
+ fRequestStation[1] = kTRUE;
+ fRequestStation[2] = kTRUE;
+ fRequestStation[3] = kTRUE;
+ fRequestStation[4] = kTRUE;
fBypassSt45 = 0;
fPadGoodnessMask = 0x400BE80; // Ped Mean is Zero | Ped Mean Too Low | Ped Mean Too High | Ped Sigma Too Low | Ped Sigma Too High | Ped is missing | HV is missing | manu occupancy too high
fMaxTriggerTracks = 100;
fMaxTrackCandidates = 10000;
- SetManuOccupancyLimits(-1,0.5); // reject manu above occ=50%
+ SetPedMeanLimits(20, 700);
+ SetManuOccupancyLimits(-1.,0.01); // reject manu above occ=1%
+
+ SetBuspatchOccupancyLimits(-1,0.05);
+ SetFractionOfBuspatchOutsideOccupancyLimit(0.10); // 10 %
+}
+
+
+//_____________________________________________________________________________
+void AliMUONRecoParam::SetCalibrationParam()
+{
+ /// Set (dummy) reconstruction parameters for calibration environment
+
+ SetNameTitle("Calibration","Calibration");
+ SetEventSpecie(AliRecoParam::kCalib);
+
+ fPedMeanLimits[0] = 5000;
+ fPedMeanLimits[1] = 0;
+
+ fPadGoodnessMask = 0x8C00; // Pedestal is missing | is too low | too high
+
}
//_____________________________________________________________________________
if (IsDefault()) cout<<"\t\t*** Parameters used by default ***"<<endl;
+ cout << "Event Specie=" << GetEventSpecie() << endl;
+
cout<<Form("Calibration mode = %s",fCalibrationMode.Data())<<endl;
cout<<Form("Clustering mode = %s",fClusteringMode.Data())<<endl;
cout<<Form("Tracking mode = %s",fTrackingMode.Data())<<endl;
cout << "The pad limits we are using are :" << endl;
- cout << Form("%5.0f <= HVSt12 <= %5.0f Volts",HVSt12LowLimit(),HVSt12HighLimit()) << endl;
- cout << Form("%5.0f <= HVSt345 <= %5.0f Volts",HVSt345LowLimit(),HVSt345HighLimit()) << endl;
+ for ( int ichamber = 0; ichamber < 10; ++ichamber )
+ {
+ cout << Form("HV Ch %d must be >= %5.2f",ichamber,HVLimit(ichamber)) << endl;
+ }
+
cout << Form("%7.2f <= Pedestal mean <= %7.2f",PedMeanLowLimit(),PedMeanHighLimit()) << endl;
cout << Form("%7.2f <= Pedestal sigma <= %7.2f",PedSigmaLowLimit(),PedSigmaHighLimit()) << endl;
cout << Form("%e <= Gain linear term <= %e",GainA1LowLimit(),GainA1HighLimit()) << endl;
cout << "Occupancy limits are :" << endl;
- cout << Form("%7.2f <= Manu occupancy < %7.2f",ManuOccupancyLowLimit(),ManuOccupancyHighLimit()) << endl;
- cout << Form("%7.2f <= Buspatch occupancy < %7.2f",BuspatchOccupancyLowLimit(),BuspatchOccupancyHighLimit()) << endl;
- cout << Form("%7.2f <= DE occupancy < %7.2f",DEOccupancyLowLimit(),DEOccupancyHighLimit()) << endl;
+ cout << Form("%e <= Manu occupancy < %7.2f",ManuOccupancyLowLimit(),ManuOccupancyHighLimit()) << endl;
+ cout << Form("%e <= Buspatch occupancy < %7.2f",BuspatchOccupancyLowLimit(),BuspatchOccupancyHighLimit()) << endl;
+ cout << Form("%e <= DE occupancy < %7.2f",DEOccupancyLowLimit(),DEOccupancyHighLimit()) << endl;
+
+ cout << "'QAChecker' limits" << endl;
+ cout << Form("FractionOfBuspatchOutsideOccupancyLimit = %5.2f %%",FractionOfBuspatchOutsideOccupancyLimit()*100.0) << endl;
+ cout << Form("Event size limit = %5.2f KB/event (soft) and %5.2f KB/event (hard)",fEventSizeSoftLimit,fEventSizeHardLimit) << endl;
+ if ( fTokenLostLimit > 0 )
+ {
+ cout << Form("We tolerate up to %5.2f %% token lost errors per event",fTokenLostLimit) << endl;
+ }
+ else
+ {
+ cout << "We dot not tolerate any token lost error !" << endl;
+ }
cout << "chamber non bending resolution = |";
for (Int_t iCh = 0; iCh < 10; iCh++) cout << Form(" %6.3f |",fDefaultNonBendingReso[iCh]);
cout << endl;
cout<<Form("maximum number of trigger tracks above which the tracking is cancelled = %d",fMaxTriggerTracks)<<endl;
cout<<Form("maximum number of track candidates above which the tracking is abandonned = %d",fMaxTrackCandidates)<<endl;
+
+ cout << Form("The average noise pad charge is assumed to be %7.2f fC",AverageNoisePadCharge()) << endl;
+ cout << Form("and clusters below %5.2f times this noise charge (i.e. %7.2f fC) are discarded",
+ ClusterChargeCut(),ClusterChargeCut()*AverageNoisePadCharge()) << endl;
+ cout << Form("Note that LowestPadCharge is then %7.2f fC",LowestPadCharge()) << endl;
+ if (TryRecover())
+ {
+ cout << "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" << endl;
+ cout << "!!! WILL TRY TO RECOVER CORRUPTED RAW DATA !!!" << endl;
+ cout << "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" << endl;
+ }
cout<<"\t-----------------------------------------------------"<<endl<<endl;
}
//_____________________________________________________________________________
void
-AliMUONRecoParam::SetDefaultLimits()
+AliMUONRecoParam::SetHVLimit(Int_t chamberId, Double_t value)
{
- /// Set the default limits and pad goodness policy
+ /// Set the HV limit for a given chamber (or all chambers
+ /// if chamberId==-1
+
+ if ( chamberId == -1 )
+ {
+ for ( Int_t i = 0; i < 10; ++i )
+ {
+ fHVLimit[i] = value;
+ }
+ }
+ else if ( chamberId >= 0 && chamberId < 10 )
+ {
+ fHVLimit[chamberId]=value;
+ }
+ else
+ {
+ AliError(Form("chamberId = %d is not a valid chamberId",chamberId));
+ }
+}
+
+//_____________________________________________________________________________
+Double_t AliMUONRecoParam::HVLimit(Int_t chamberId) const
+{
+ /// Get the HV limit for a given chamber
+ if ( chamberId >= 0 && chamberId < 10 )
+ {
+ return fHVLimit[chamberId];
+ }
+ AliError(Form("chamberId = %d is not a valid chamberId",chamberId));
- fHVSt12Limits[0]=1500;
- fHVSt12Limits[1]=2000;
+ return 0.0;
+}
- fHVSt345Limits[0]=1500;
- fHVSt345Limits[1]=2000;
+//_____________________________________________________________________________
+void
+AliMUONRecoParam::SetDefaultLimits()
+{
+ /// Set the default limits and pad goodness policy
- fPedMeanLimits[0] = 50;
+ fHVSt12Limits[0]=1500; // kept for backward compatibility only
+ fHVSt12Limits[1]=2000; // kept for backward compatibility only
+ fHVSt345Limits[0]=1500; // kept for backward compatibility only
+ fHVSt345Limits[1]=2000; // kept for backward compatibility only
+
+ SetHVLimit(-1,1590); // this one is the real HV limit used now
+
+ fPedMeanLimits[0] = 20;
fPedMeanLimits[1] = 1024;
fPedSigmaLimits[0] = 0.6;
fManuOccupancyLimits[0] = -1.0;
fManuOccupancyLimits[1] = 1.0;
- fBuspatchOccupancyLimits[0] = -1.0;
+ fBuspatchOccupancyLimits[0] = 1E-6;
fBuspatchOccupancyLimits[1] = 1.0;
fDEOccupancyLimits[0] = -1.0;
fDEOccupancyLimits[1] = 1.0;
- fChargeSigmaCut = 4.0;
+ fMissingPadFractionLimit = -1; // DEPRECATED
+ fFractionOfBuspatchOutsideOccupancyLimit = 0.05; // 5 %
+
+ ChargeSigmaCut(4.0); // pad with charge < 4.0 x sigma will be removed (where sigma is the actual noise of that very pad, i.e. not the average)
+
+ AverageNoisePadCharge(0.22875); // 0.22875 coulombs ~ 1.5 ADC channels
+
+ ClusterChargeCut(2.0); // will cut cluster below 2.0 x LowestPadCharge()
+
+ SetEventSizeLimits(35.0,45.0);
+
+ SetTokenLostLimit(0.0);
+
+ fTryRecover = kFALSE;
}
+
+//-----------------------------------------------------------------------
+TObjArray*
+AliMUONRecoParam::Create(const char* settings)
+{
+ /// Create pre-defined recoparam array, according to settings.
+ /// settings is case-insensitive.
+ ///
+ /// Currently defined are :
+ ///
+ /// "cosmics" :
+ /// Cosmic (default)
+ /// Calibration
+ /// "ppideal"
+ /// LowFlux (default)
+ /// Calibration
+ /// "ppreal"
+ /// LowFlux (modified to reconstruct real p-p data)
+ /// Calibration
+ /// "pprealsim"
+ /// LowFlux (modified to reconstruct realistic p-p simulation)
+ /// Calibration
+ /// "pbpbreal"
+ /// HighFlux (modified to reconstruct real Pb-Pb data)
+ /// Calibration
+
+ AliMUONRecoParam* param(0x0);
+
+ AliRecoParam::EventSpecie_t defaultParam = AliRecoParam::kLowMult;
+
+ TString stype(settings);
+ stype.ToLower();
+
+ if ( stype == "cosmics" )
+ {
+ // set parameters for cosmic runs
+ param = AliMUONRecoParam::GetCosmicParam();
+ defaultParam = AliRecoParam::kCosmic;
+ }
+ else if ( stype == "ppideal" )
+ {
+ // set default lowFlux parameters
+ param = AliMUONRecoParam::GetLowFluxParam();
+ }
+ else if ( stype == "ppreal" || stype == "pprealsim" || stype == "pprealnofield" )
+ {
+ // common parameters for p-p data and realistic p-p simu
+ param = AliMUONRecoParam::GetLowFluxParam();
+ param->SaveFullClusterInESD(kTRUE, 100.);
+ for (Int_t iCh=0; iCh<10; iCh++)
+ {
+ param->SetDefaultNonBendingReso(iCh,0.4);
+ param->SetDefaultBendingReso(iCh,0.4);
+ }
+ param->SetSigmaCutForTracking(7.);
+ param->SetStripCutForTrigger(1.5);
+ param->SetSigmaCutForTrigger(6.);
+ param->ImproveTracks(kTRUE, 6.);
+ param->SetPedMeanLimits(20, 700);
+ param->SetManuOccupancyLimits(-1.,0.01);
+ param->SetBuspatchOccupancyLimits(-1.,0.01);
+ param->SetFractionOfBuspatchOutsideOccupancyLimit(0.05); // 5 %
+ param->SetEventSizeLimits(45., 65.);
+
+ // specific parameters for p-p data or realistic p-p simu
+ if ( stype == "ppreal" || stype == "pprealnofield" )
+ {
+ param->SetPadGoodnessMask(0x400BE9B);
+ }
+ else
+ {
+ param->SetPadGoodnessMask(0x8080);
+ }
+
+ if ( stype == "pprealnofield" )
+ {
+ param->TryRecover(kTRUE);
+ }
+ }
+ else if ( stype == "pbpbreal" || stype == "pbpbrealsim" )
+ {
+ // common parameters for Pb-Pb data and realistic Pb-Pb simu
+ param = AliMUONRecoParam::GetHighFluxParam();
+ defaultParam = AliRecoParam::kHighMult;
+ param->SaveFullClusterInESD(kTRUE, 100.);
+ for (Int_t iCh=0; iCh<10; iCh++)
+ {
+ param->SetDefaultNonBendingReso(iCh,0.2);
+ param->SetDefaultBendingReso(iCh,0.2);
+ }
+ param->SetSigmaCutForTracking(5.);
+ param->SetStripCutForTrigger(1.5);
+ param->SetSigmaCutForTrigger(4.);
+ param->ImproveTracks(kTRUE, 4.);
+ param->SetPedMeanLimits(20, 700);
+ param->SetManuOccupancyLimits(-1.,0.03);
+ param->SetBuspatchOccupancyLimits(-1.,0.1); // 10 % (this cut not used for the reco anyway)
+ param->SetFractionOfBuspatchOutsideOccupancyLimit(0.05); // 5 %
+ param->SetEventSizeLimits(100., 150.);
+
+ // specific parameters for Pb-Pb data or realistic Pb-Pb simu
+ if ( stype == "pbpbreal" )
+ {
+ param->SetPadGoodnessMask(0x400BE9B);
+ }
+ else
+ {
+ param->SetPadGoodnessMask(0x8080);
+ }
+ }
+ else
+ {
+ AliErrorClass("Unknown settings !");
+ return 0x0;
+ }
+
+ TObjArray* recoParams = new TObjArray;
+
+ recoParams->AddLast(param);
+
+ // set (dummy) parameters for calibration runs
+ param = AliMUONRecoParam::GetCalibrationParam();
+ recoParams->AddLast(param);
+
+ // set parameters for Pb-Pb runs
+ // param = AliMUONRecoParam::GetHighFluxParam();
+ // recoParams.AddLast(param);
+
+ // identify default parameters (exit if identification failed)
+ Bool_t defaultIsSet = kFALSE;
+ TIter next(recoParams);
+ while ( (param = static_cast<AliMUONRecoParam*>(next())) )
+ {
+ if (param->GetEventSpecie() == defaultParam)
+ {
+ param->SetAsDefault();
+ defaultIsSet = kTRUE;
+ }
+ param->Print("FULL");
+ }
+
+ if (!defaultIsSet)
+ {
+ AliErrorClass("The default reconstruction parameters are not set! Exiting...");
+ return 0x0;
+ }
+
+ return recoParams;
+}
+
+//______________________________________________________________________________
+void
+AliMUONRecoParam::Show(Int_t runNumber, const char* ocdb)
+{
+ /// Show what we have in the designated OCDB for that run, as far as RecoParams are concerned
+
+ AliCDBManager::Instance()->SetDefaultStorage(ocdb);
+ AliCDBManager::Instance()->SetRun(runNumber);
+
+ AliCDBEntry* entry = AliCDBManager::Instance()->Get("MUON/Calib/RecoParam");
+
+ if (!entry) return;
+
+ TObject* o = entry->GetObject();
+
+ if ( o->IsA() == TObjArray::Class() )
+ {
+ TObjArray* array = static_cast<TObjArray*>(o);
+ for ( Int_t i = 0; i <= array->GetLast(); ++i )
+ {
+ AliDetectorRecoParam* p = static_cast<AliDetectorRecoParam*>(array->At(i));
+ cout << Form("array[%d]=%s %s %s",i,
+ p ? p->ClassName() : "",
+ p ? AliRecoParam::GetEventSpecieName(AliRecoParam::Convert(p->GetEventSpecie())) :"",
+ p ? ( p->IsDefault() ? "default" : "") : "" ) << endl;
+ }
+ cout << "=========== dumps below ====== " << endl;
+
+ for ( Int_t i = 0; i <= array->GetLast(); ++i )
+ {
+ AliDetectorRecoParam* p = static_cast<AliDetectorRecoParam*>(array->At(i));
+ if ( p ) p->Print("");
+ }
+ }
+ else
+ {
+ o->Print();
+ }
+}