static AliMUONRecoParam *GetLowFluxParam();
static AliMUONRecoParam *GetHighFluxParam();
static AliMUONRecoParam *GetCosmicParam();
+ static AliMUONRecoParam *GetCalibrationParam();
/// set the calibration mode (see GetCalibrationMode() for possible modes)
void SetCalibrationMode(Option_t* mode) { fCalibrationMode = mode; fCalibrationMode.ToUpper();}
/// get the clustering (pre-clustering) mode
Option_t* GetClusteringMode() const {return fClusteringMode.Data();}
+ /// Get the (truncated) average of sigmas of pedestal measurements, i.e. noise, of pads
+ Double_t AverageNoisePadCharge() const { return fAverageNoisePadCharge; }
+ /// Set the average of sigmas of pedestal measurements, i.e. noise, of pads
+ void AverageNoisePadCharge(Double_t noise) { fAverageNoisePadCharge = noise; }
+
+ /// Get the lowest charge we allow for pads
+ Double_t LowestPadCharge() const { return fChargeSigmaCut*fAverageNoisePadCharge; }
+
+ /// Get the cut applied to cut on cluster charge (the charge is cut if below fClusterChargeCut*LowestPadCharge())
+ Double_t ClusterChargeCut() const { return fClusterChargeCut; }
+ /// Set the cut applied to cut on cluster charge (the charge is cut if below fClusterChargeCut*LowestPadCharge())
+ void ClusterChargeCut(Double_t n) { fClusterChargeCut=n; }
+
+ /// Get the lowest possible cluster charge
+ Double_t LowestClusterCharge() const { return ClusterChargeCut()*LowestPadCharge(); }
+
/// set the tracking mode
void SetTrackingMode(Option_t* mode) {fTrackingMode = mode; fTrackingMode.ToUpper();}
/// get the tracking mode
void SetMaxBendingMomentum(Double_t val) {fMaxBendingMomentum = val;}
/// return the maximum value (GeV/c) of momentum in bending plane
Double_t GetMaxBendingMomentum() const {return fMaxBendingMomentum;}
+
/// set the maximum value of the non bending slope
void SetMaxNonBendingSlope(Double_t val) {fMaxNonBendingSlope = val;}
/// return the maximum value of the non bending slope
/// return the maximum value of the bending slope
Double_t GetMaxBendingSlope() const {return fMaxBendingSlope;}
- /// set the vertex dispersion (cm) in non bending plane (used for original tracking only)
+ /// switch on/off the track selection according to their slope (instead of their impact parameter)
+ void SelectOnTrackSlope(Bool_t flag) {fSelectTrackOnSlope = flag;}
+ /// return kTRUE/kFALSE if tracks are selected according to their slope/impact parameter
+ Bool_t SelectOnTrackSlope() const {return fSelectTrackOnSlope;}
+
+ /// set the vertex dispersion (cm) in non bending plane
void SetNonBendingVertexDispersion(Double_t val) {fNonBendingVertexDispersion = val;}
- /// return the vertex dispersion (cm) in non bending plane (used for original tracking only)
+ /// return the vertex dispersion (cm) in non bending plane
Double_t GetNonBendingVertexDispersion() const {return fNonBendingVertexDispersion;}
- /// set the vertex dispersion (cm) in bending plane (used for original tracking only)
+ /// set the vertex dispersion (cm) in bending plane
void SetBendingVertexDispersion(Double_t val) {fBendingVertexDispersion = val;}
- /// return the vertex dispersion (cm) in bending plane (used for original tracking only)
+ /// return the vertex dispersion (cm) in bending plane
Double_t GetBendingVertexDispersion() const {return fBendingVertexDispersion;}
/// set the maximum distance to the track to search for compatible cluster(s) in non bending direction
Double_t GetSigmaCutForImprovement() const {return fSigmaCutForImprovement;}
/// set the cut in sigma to apply on track during trigger hit pattern search
- void SetSigmaCutForTrigger(Double_t val) {fSigmaCutForTrigger = val;}
+ void SetSigmaCutForTrigger(Double_t val) {fSigmaCutForTrigger = val; fMaxNormChi2MatchTrigger = val*val;}
/// return the cut in sigma to apply on track during trigger hit pattern search
Double_t GetSigmaCutForTrigger() const {return fSigmaCutForTrigger;}
/// set the cut in strips to apply on trigger track during trigger chamber efficiency
/// return the maximum search area in strips to apply on trigger track during trigger chamber efficiency
Double_t GetMaxStripAreaForTrigger() const {return fMaxStripAreaForTrigger;}
- /// set the maximum normalized chi2 of tracking/trigger track matching
- void SetMaxNormChi2MatchTrigger(Double_t val) {fMaxNormChi2MatchTrigger = val;}
/// return the maximum normalized chi2 of tracking/trigger track matching
Double_t GetMaxNormChi2MatchTrigger() const {return fMaxNormChi2MatchTrigger;}
/// Get the default bending resolution of chamber iCh
Double_t GetDefaultBendingReso(Int_t iCh) const {return (iCh >= 0 && iCh < 10) ? fDefaultBendingReso[iCh] : FLT_MAX;}
+ /// Set the maximum number of trigger tracks above which the tracking is cancelled
+ void SetMaxTriggerTracks(Int_t maxTriggerTracks) {fMaxTriggerTracks = maxTriggerTracks;}
+ /// Get the maximum number of trigger tracks above which the tracking is cancelled
+ Int_t GetMaxTriggerTracks() const {return fMaxTriggerTracks;}
+
+ /// Set the maximum number of track candidates above which the tracking abort
+ void SetMaxTrackCandidates(Int_t maxTrackCandidates) {fMaxTrackCandidates = maxTrackCandidates;}
+ /// Get the maximum number of track candidates above which the tracking abort
+ Int_t GetMaxTrackCandidates() const {return fMaxTrackCandidates;}
+
+ /// Set the limits for the acceptable manu occupancy
+ void SetManuOccupancyLimits(float low, float high) { fManuOccupancyLimits[0]=low; fManuOccupancyLimits[1]=high; }
+ /// Retrieve low value of manu occupancy limit
+ Float_t ManuOccupancyLowLimit() const { return fManuOccupancyLimits[0]; }
+ /// Retrieve high value of manu occupancy limit
+ Float_t ManuOccupancyHighLimit() const { return fManuOccupancyLimits[1]; }
+
+ /// Set the limits for the acceptable bp occupancy
+ void SetBuspatchOccupancyLimits(float low, float high) { fBuspatchOccupancyLimits[0]=low; fBuspatchOccupancyLimits[1]=high; }
+ /// Retrieve low value of bp occupancy limit
+ Float_t BuspatchOccupancyLowLimit() const { return fBuspatchOccupancyLimits[0]; }
+ /// Retrieve high value of bp occupancy limit
+ Float_t BuspatchOccupancyHighLimit() const { return fBuspatchOccupancyLimits[1]; }
+
+ /// Set the limits for the acceptable DE occupancy
+ void SetDEOccupancyLimits(float low, float high) { fDEOccupancyLimits[0]=low; fDEOccupancyLimits[1]=high; }
+ /// Retrieve low value of DE occupancy limit
+ Float_t DEOccupancyLowLimit() const { return fDEOccupancyLimits[0]; }
+ /// Retrieve high value of DE occupancy limit
+ Float_t DEOccupancyHighLimit() const { return fDEOccupancyLimits[1]; }
+
+ /// Set the missing pad fraction limit
+ void SetMissingPadFractionLimit(float v) { fMissingPadFractionLimit = v; }
+ /// Get the missing pad fraction limit
+ Float_t MissingPadFractionLimit() const { return fMissingPadFractionLimit; }
+
+ /// Set the fraction of buspatches outside the occupancy limits
+ void SetFractionOfBuspatchOutsideOccupancyLimit(float v) { fFractionOfBuspatchOutsideOccupancyLimit = v; }
+ /// Get the fraction of buspatches outside the occupancy limits
+ Float_t FractionOfBuspatchOutsideOccupancyLimit() const { return fFractionOfBuspatchOutsideOccupancyLimit; }
+
virtual void Print(Option_t *option = "") const;
-
private:
void SetDefaultLimits();
-
private:
/// clustering mode: NOCLUSTERING, PRECLUSTER, PRECLUSTERV2, PRECLUSTERV3, COG, <pre>
Bool_t fSaveFullClusterInESD; ///< kTRUE to save all cluster info (including pads) in ESD
- /// calibration mode: GAIN, NOGAIN, GAINCONSTANTCAPA
+ /// calibration mode: GAIN, NOGAIN, GAINCONSTANTCAPA, INJECTIONGAIN
TString fCalibrationMode; ///<\brief calibration mode
Int_t fBypassSt45; ///< non-zero to use trigger tracks to generate "fake" clusters in St 4 and 5. Can be 0, 4, 5 or 45 only
Bool_t fRemoveConnectedTracksInSt12; ///< kTRUE to remove tracks sharing cluster in station 1 and 2
+ Int_t fMaxTriggerTracks; ///< maximum number of trigger tracks above which the tracking is cancelled
+ Int_t fMaxTrackCandidates; ///< maximum number of track candidates above which the tracking abort
+
+ Bool_t fSelectTrackOnSlope; ///< select track candidates according to their slope (instead of their impact parameter)
+
+ Double32_t fManuOccupancyLimits[2]; ///< low and high thresholds for manu occupancy cut
+ Double32_t fBuspatchOccupancyLimits[2]; ///< low and high thresholds for bus patch occupancy cut
+ Double32_t fDEOccupancyLimits[2]; ///< low and high thresholds for DE occupancy cut
+
+ Double32_t fMissingPadFractionLimit; ///< above this fraction, we consider we have too few pads alive...
+ Double32_t fFractionOfBuspatchOutsideOccupancyLimit; ///< above this limit, we consider we have too many buspatches out of the allowed occupancy range
+
+ Double32_t fAverageNoisePadCharge; ///< the (truncated, typically at 10%) mean of the sigma of the pedestals, in femto-coulomb
+ Double32_t fClusterChargeCut; ///< the cluster is cut if its charge is below fClusterChargeCut*LowestPadCharge()
+
// functions
void SetLowFluxParam();
void SetHighFluxParam();
void SetCosmicParam();
+ void SetCalibrationParam();
-
- ClassDef(AliMUONRecoParam,11) // MUON reco parameters
+ ClassDef(AliMUONRecoParam,166) // MUON reco parameters
};
#endif
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff