\page README_rec Reconstruction
-The reconstruction is a multistage process, driven by the AliMUONReconstructor class :
-
-- We read the RAW data, convert them (convert them back for simulated data) to
-AliMUONDigit. Performed by AliMUONDigitMaker.
-- We calibrate the digits, by subtracting pedestals and multiplying by gains. Performed
- by AliMUONDigitCalibrator. Calibrated digits might be saved (back) to TreeD.
-- We make clusters by associating digits, producing AliMUONRawCluster objects that end up
- in TreeR of MUON.RecPoints#.root file(s). Steered by AliMUONClusterReconstructor. @ref AliMUONVClusterFinder "More..."
-
-Part of the reconstruction, but not really steered by AliMUONReconstructor, is the
- last stage, the tracking, i.e. associating clusters to form tracks. Steered by AliMUONTracker.
- Producing AliMUONTrack objects that end up in TreeT of MUON.Tracks#.root and AliESDMuonTrack objects
-that end up in the ESD (Event Summary Data), AliESDs.root file. @ref AliMUONVTrackReconstructor "More..."
-
-
-\section rec_s1 How to tune muon track reconstruction
-
-Several options and adjustable parameters are available for both Kalman and Original
-tracking algorithms (hard coded for the moment in AliMUONVTrackReconstructor.cxx):
-- *fgkSigmaToCutForTracking* : quality cut used to select new clusters to be
- attached to the track candidate and to select good tracks.
-- *fgkMakeTrackCandidatesFast* : if this flag is set to 'true', the track candidates
- are made assuming linear propagation between stations 4 and 5.
-- *fgkTrackAllTracks* : according to the value of this flag, in case that several
- new clusters pass the quality cut, either we consider all the possibilities
- (duplicating tracks) or we attach only the best cluster.
-- *fgkRecoverTracks* : if this flag is set to 'true', we try to recover the tracks
- lost during the tracking by removing the worst of the 2 clusters attached in the
- previous station.
-- *fgkImproveTracks* : if this flag is set to 'true', we try to improve the quality
- of the tracks at the end of the tracking by removing clusters that do not pass
- new quality cut (within the limit that we must keep at least one cluster per
- the station).
-- *fgkSigmaToCutForImprovement* : quality cut used when we try to improve the
- quality of the tracks.
+The reconstruction is a multistage process, driven by the AliMUONTracker and AliMUONReconstructor classes
+via the AliReconstruction class, which is divided into three parts:
+- the digitization of the electronic response,
+- the clustering of the digits to locate the crossing point of the muon with the chamber,
+- the tracking to reconstruct the trajectory of the muon in the spectrometer from which we can extract the kinematics.
+
+All the adjustable options and parameters used to tune the different part of the reconstruction are handled by the class AliMUONRecoParam.
+
+
+\section rec_s1 Digitization
+
+- We read the RAW data, convert them (convert them back for simulated data) to digit (object inheriting from AliMUONVDigit
+stored into containers inheriting from AliMUONVDigitStore). This conversion is performed by the class AliMUONDigitMaker.
+- We calibrate the digits, via AliMUONDigitCalibrator, by subtracting pedestals and multiplying by gains. All the calibration parameters
+(pedestals, gains, capacitances and HV) are read from the OCDB and stored into AliMUONCalibrationData objects.
+- We create the status of the digit (e.g. pedestal higher than maximum or HV switched off), using AliMUONPadStatusMaker.
+- We create the status map for each digit, i.e the global status (good/bad) of that digit and of its neighbords, using AliMUONPadStatusMapMaker.
+- Calibrated digits might be saved (back) to TreeD in MUON.Digits.root file.
+
+
+\section rec_s2 Clustering
+
+- We convert the digits having a positive charge into pads (AliMUONPad objects), which also contain information about the digit geometrical
+position.
+- We loop over pads in the bending and non-bending planes of the DE to form groups of contiguous pads. We then merge the overlapping groups
+of pads from both cathodes to build the pre-clusters that are the objects to be clusterized.
+- We unfold each pre-cluster in order to extract the number and the position of individual clusters merged in it (complex pre-clusters are
+made of a superimposition of signals from muon, from physical background (e.g. hadrons) and from electronic noise).
+- We finally determine the MC label: take the one of the simulated track that contribute the most to the total charge of the 2 (bending and the
+non bending) pads located below the cluster position. This is possible only if we perform the reconstruction from simulated digits (which contain
+the list of MC track contributions). We set it to -1 when reconstructing from raw data or in case of failure.
+
+Several versions of pre-clustering are available, all inheriting from AliMUONVClusterFinder, with different ways to loop over pads to form
+pre-clusters:
+- AliMUONPreClusterFinder
+- AliMUONPreClusterFinderV2
+- AliMUONPreClusterFinderV3
+
+Several version of clustering are available, all inheriting from AliMUONVClusterFinder, with different degrees of complexity:
+- AliMUONClusterFinderCOG simply compute the Center Of Gravity of the charge distribution in the pre-cluster.
+- AliMUONClusterFinderSimpleFit simply fit the charge distribution with a single 2D Mathieson function.
+- AliMUONClusterFinderMLEM uses the Maximum Likelihood Expectation Minimization algorithm.
+This is a recursive procedure which determines the number and the approximate position of clusters into the pre-cluster that are needed
+to reproduce the whole charge distribution. It assumes that the charge distribution of each single cluster follow a 2D Mathieson function.
+If the estimated number of clusters is too high (>3), the pre-cluster is split into several groups of 1-2 or 3 clusters selected having
+the minimum total coupling to all the other clusters into the pre-cluster. Each group of clusters is then fitted with a sum of 2D Mathieson
+functions to extract their exact position.
+- AliMUONClusterFinderPeakCOG is a simplified version of the MLEM clusterizer, without splitting and computing the Center Of Gravity of the
+local charge distribution to extract the position of every clusters found in the pre-cluster.
+- AliMUONClusterFinderPeakFit is another simplified version of the MLEM clusterizer again without splitting. The pre-cluster is fitted with
+a sum of 2D Mathieson if it contains less than 3 clusters or we switch to the above COG method.
+
+The cluster recontruction is driven by the class AliMUONSimpleClusterServer, inheriting from AliMUONVClusterServer.
+It can be performed either before or during the tracking. In the first case, all the chambers are fully clusterized and the clusters (objects
+inheriting from AliMUONVCluster stored into containers inheriting from AliMUONVClusterStore) are saved to TreeR in Muon.RecPoints.root file.
+We use the class AliMUONLegacyClusterServer (also inheriting from AliMUONVClusterServer) read back the TreeR and provide clusters to the tracking.
+In the second case, we clusterize the chambers only in the region where we are looking for new clusters to be attached to the track candidates.
+This makes the clustering faster but the clusters cannot be saved to the TreeR.
+
+
+\section rec_s3 Tracking
+
+The MUON code provides two different algorithms to reconstruct the muon trajectory. In both cases the general tracking procedure is the same,
+the only difference being the way the track parameters are computed from the cluster positions. The "Original" algorithm perform a fit of the
+track parameters using the MINUIT package of Root, while the "Kalman" algorithm compute them using analytical formulae. The classes driving
+the tracking are AliMUONTrackReconstructor and AliMUONTrackReconstructorK for the "Original" and the "Kalman" algorithms respectively,
+both inheriting from AliMUONVTrackReconstructor. The reconstructed muon tracks are objects of the class AliMUONTrack.
+
+The general tracking procedure is as follow:
+- Build primary track candidates using clusters on station 4 and 5: Make all combination of clusters between the two chambers of station 5(4).
+For each combination compute the local position and impact parameter of the tracklet at vertex and estimate its bending momentum given the averaged
+magnetic field inside the dipole and assuming that the track is coming from the vertex. Also compute the corresponding error and covariances of
+these parameters. Then select pairs for which the estimated bending momentum and the non-bending impact parameter at vertex are within given limits
+taking into account the errors. Extrapolate the primary track candidates to station 4(5), look for at least one compatible cluster to validate them
+and recompute the track parameters and covariances.
+- Remove the identical track candidates (i.e. the ones sharing exactly the same clusters), and the ones whose bending momentum and non-bending
+impact parameter at vertex are out of given limits taking into account the errors.
+- Propagate the track to stations 3, 2 then 1. At each station, ask the "ClusterServer" to provide clusters in the region of interest defined in
+the reconstruction parameters. Select the one(s) compatible with the track and recompute the track parameters and covariances. Remove the track if
+no good cluster is found or if its re-computed bending momentum and non-bending impact parameter at vertex are out of given limits taking into
+account the errors.
+- Remove the connected tracks (i.e. the ones sharing one cluster or more in stations 3, 4 or 5) keeping the one with the largest number of cluster
+or the one with the lowest chi2 in case of equality. Then recompute the track parameters and covariances at each attached cluster (using the
+so-called Smoother algorithm in the case of the "Kalman" tracking).
+- Find the MC label from the label of each attached cluster (if available): more than 50% of clusters must share the same label, including 1 before
+and 1 after the dipole. Set it to -1 when reconstructing real data or in case of failure.
+- The reconstructed tracks are finally matched with the trigger tracks (reconstructed from the local response of the trigger) to identify the
+muon(s) that made the trigger.
+
+The new clusters to be attached to the track are selected according to their local chi2 (i.e. their transverse position relatively to the track,
+normalized by the convolution of the cluster resolution with the resolution of the track extrapolated to the cluster location).
+If several compatible clusters are found on the same chamber, the track candidate is duplicated to consider all the possibilities.
+
+The last part of the tracking is the extrapolation of the reconstructed tracks to the vertex of the collision. The vertex position is measured
+by the SPD (the Silicon Pixel layers of the ITS Detector). In order to be able to perform any kind of muon analysis, we need to compute the track
+parameters assuming the muon has been produced in the initial collision as well as the track parameters in the vertex plane. The first set of
+parameters is obtained by correcting for energy loss and multiple Coulomb scattering in the front absorber (we force the track to come from the
+exact vertex position (x,y,z) by using the Branson correction), while the second one is obtained by correcting for energy loss only.
+
+The final results of the reconstruction - from which we will perform the physical analyses, compute detector efficiencies and perform calibration
+checks - are stored in objects of the class AliESDMuonTrack and saved in AliESD.root file. Three kinds of track can be saved: a tracker track
+matched with a trigger track, a tracker track alone and a trigger track alone (unused data members are set to default in the last two cases).
+The complete list of MUON data saved into ESD is given in section @ref rec_s5.
+
+
+\section rec_s4 How to tune the muon reconstruction
+
+Several options and adjustable parameters allow to tune the entire reconstruction. They are stored in the OCDB in the directory MUON/Calib/RecoParam.
+However, it is possible to customize the parameters by adding the following lines in the reconstruction macro (runReconstruction.C):
+\verbatim
+ AliMUONRecoParam *muonRecoParam = AliMUONRecoParam::Get...Param();
+ muonRecoParam->Use...();
+ muonRecoParam->Set...();
+ ...
+ MuonRec->SetRecoParam("MUON",muonRecoParam);
+\endverbatim
+
+Three sets of default parameters are available:
+- <code>GetLowFluxParam()</code>: parameters for p-p collisions
+- <code>GetHighFluxParam()</code>: parameters for Pb-Pb collisions
+- <code>GetCosmicParam()</code>: parameters for cosmic runs
+
+Every option/parameter can be set one by one. Here is the complete list of available setters:
+- <code>SetCalibrationMode("mode")</code>: set the calibration mode: NOGAIN (only do pedestal subtraction),
+ GAIN (do pedestal subtraction and apply gain correction, but with a single capacitance value for all channels),
+ GAINCONSTANTCAPA (as GAIN, but with a channel-dependent capacitance value).
+- <code>SetClusteringMode("mode")</code>: set the clustering (pre-clustering) mode: NOCLUSTERING, PRECLUSTER, PRECLUSTERV2, PRECLUSTERV3, COG,
+ SIMPLEFIT, SIMPLEFITV3, MLEM:DRAW, MLEM, MLEMV2, MLEMV3.
+- <code>SetTrackingMode("mode")</code>: Set the tracking mode: ORIGINAL, KALMAN.
+- <code>CombineClusterTrackReco(flag)</code>: switch on/off the combined cluster/track reconstruction
+- <code>SaveFullClusterInESD(flag, % of event)</code>: save all cluster info (including pads) in ESD, for the given percentage of events
+ (100% by default)
+- <code>SelectOnTrackSlope(flag)</code>: switch to select tracks on their slope instead of impact parameter at vertex and/or bending momentum.
+- <code>SetMinBendingMomentum(value)</code>: set the minimum acceptable value (GeV/c) of track momentum in bending plane
+- <code>SetMaxBendingMomentum(value)</code>: set the maximum acceptable value (GeV/c) of track momentum in bending plane
+- <code>SetMaxNonBendingSlope(value)</code>: set the maximum value of the track slope in non bending plane (used when selecting on track slope).
+- <code>SetMaxBendingSlope(value)</code>: set the maximum value of the track slope in non bending plane (used when selecting on track slope).
+- <code>SetNonBendingVertexDispersion(value)</code>: set the vertex dispersion (cm) in non bending plane (used for the original tracking and to
+ select track on their non-bending impact parameter at vertex).
+- <code>SetBendingVertexDispersion(value)</code>: set the vertex dispersion (cm) in bending plane (used for the original tracking, to compute the
+ error on the estimated bending momentum at the very begining and to select track on their bending impact parameter at vertex (used when B=0)).
+- <code>SetMaxNonBendingDistanceToTrack(value)</code>: set the maximum distance to the track to search for compatible cluster(s) in non bending
+ direction. This value is convoluted with both the track and the cluster resolutions to define the region of interest.
+- <code>SetMaxBendingDistanceToTrack(value)</code>: set the maximum distance to the track to search for compatible cluster(s) in bending direction
+ This value is convoluted with both the track and the cluster resolutions to define the region of interest.
+- <code>SetSigmaCutForTracking(value)</code>: set the cut in sigma to apply on cluster (local chi2) and track (global chi2) during tracking
+- <code>ImproveTracks(flag, sigma cut)</code>: recompute the local chi2 of each cluster with the final track parameters and removed the ones that
+ do not pass a new quality cut. The track is removed if we do not end with at least one good cluster per requested station and two clusters in
+ station 4 and 5 together whatever they are requested or not.
+- <code>ImproveTracks(flag)</code>: same as above using the default quality cut
+- <code>SetSigmaCutForTrigger(value)</code>: set the cut in sigma to apply on track during trigger hit pattern search
+- <code>SetStripCutForTrigger(value)</code>: set the cut in strips to apply on trigger track during trigger chamber efficiency
+- <code>SetMaxStripAreaForTrigger(value)</code>: set the maximum search area in strips to apply on trigger track during trigger chamber efficiency
+- <code>SetMaxNormChi2MatchTrigger(value)</code>: set the maximum normalized chi2 for tracker/trigger track matching
+- <code>TrackAllTracks(flag)</code>: consider all the clusters passing the sigma cut (duplicate the track) or only the best one
+- <code>RecoverTracks(flag)</code>: during the tracking procedure, if no cluster is found in station 1 or 2, we try it again after having removed
+ (if possible with respect to the condition to keep at least 1 cluster per requested station) the worst cluster attached in the previous station
+ (assuming it was a cluster from background).
+- <code>MakeTrackCandidatesFast(flag)</code>: make the primary track candidates formed by cluster on stations 4 and 5 assuming there is no
+ magnetic field in that region to speed up the reconstruction.
+- <code>MakeMoreTrackCandidates(Bool_t flag)</code>: make the primary track candidate using 1 cluster on station 4 and 1 cluster on station 5
+ instead of starting from 2 clusters in the same station.
+- <code>ComplementTracks(Bool_t flag)</code>: look for potentially missing cluster to be attached to the track (a track may contain up to 2
+ clusters per chamber do to the superimposition of DE, while the tracking procedure is done in such a way that only 1 can be attached).
+- <code>RemoveConnectedTracksInSt12(Bool_t flag)</code>: extend the definition of connected tracks to be removed at the end of the tracking
+ procedure to the ones sharing one cluster on more in any station, including stations 1 and 2.
+- <code>UseSmoother(Bool_t flag)</code>: use or not the smoother to recompute the track parameters at each attached cluster
+ (used for Kalman tracking only)
+- <code>UseChamber(Int_t iCh, Bool_t flag)</code>: set the chambers to be used (disable the clustering if the chamber is not used).
+- <code>RequestStation(Int_t iSt, Bool_t flag)</code>: impose/release the condition "at least 1 cluster per station" for that station.
+- <code>BypassSt45(Bool_t st4, Bool_t st5)</code>: make the primary track candidate from the trigger track instead of using stations 4 and/or 5.
+- <code>SetHVSt12Limits(float low, float high)</code>: Set Low and High threshold for St12 HV
+- <code>SetHVSt345Limits(float low, float high)</code>: Set Low and High threshold for St345 HV
+- <code>SetPedMeanLimits(float low, float high)</code>: Set Low and High threshold for pedestal mean
+- <code>SetPedSigmaLimits(float low, float high)</code>: Set Low and High threshold for pedestal sigma
+- <code>SetGainA1Limits(float low, float high)</code>: Set Low and High threshold for gain a0 term
+- <code>SetGainA2Limits(float low, float high)</code>: Set Low and High threshold for gain a1 term
+- <code>SetGainThresLimits(float low, float high)</code>: Set Low and High threshold for gain threshold term
+- <code>SetPadGoodnessMask(UInt_t mask)</code>: Set the goodness mask (see AliMUONPadStatusMapMaker)
+- <code>ChargeSigmaCut(Double_t value)</code>: Number of sigma cut we must apply when cutting on adc-ped
+- <code>SetDefaultNonBendingReso(Int_t iCh, Double_t val)</code>: Set the default non bending resolution of chamber iCh
+- <code>SetDefaultBendingReso(Int_t iCh, Double_t val)</code>: Set the default bending resolution of chamber iCh
+- <code>SetMaxTriggerTracks(Int_t val)</code>: Set the maximum number of trigger tracks above which the tracking is cancelled
+- <code>SetMaxTrackCandidates(Int_t val)</code>: Set the maximum number of track candidates above which the tracking abort
+
+We can use the method Print("FULL") to printout all the parameters and options set in the class AliMUONRecoParam.
+
+RecoParams can be put into OCDB using the MakeMUONSingleRecoParam.C or MakeMUONRecoParamArray.C macros.
+
+\section rec_s5 ESD content
+
+Three kinds of track can be saved in ESD: a tracker track matched with a trigger track, a tracker track alone and a trigger track alone (unused
+data members are set to default values in the last two cases). These tracks are stored in objects of the class AliESDMuonTrack. Two methods can be
+used to know the content of an ESD track:
+- <code>ContainTrackerData()</code>: Return kTRUE if the track contain tracker data
+- <code>ContainTriggerData()</code>: Return kTRUE if the track contain trigger data
+
+The AliESDMuonTrack objects contain:
+- Tracker track parameters (x, theta_x, y, theta_y, 1/p_yz) at vertex (x=x_vtx; y=y_vtx)
+- Tracker track parameters in the vertex plane
+- Tracker track parameters at first cluster
+- Tracker track parameter covariances at first cluster
+- Tracker track global informations (track ID, chi2, number of clusters, cluster map, MC label if any)
+- TClonesArray of associated clusters stored in AliESDMuonCluster objects
+- Trigger track informations (local trigger decision, strip pattern, hit pattern, ...)
+- Chi2 of tracker/trigger track matching
+
+The AliESDMuonCluster objects contain:
+- Cluster ID providing information about the location of the cluster (chamber ID and DE ID)
+- Cluster position (x,y,z)
+- Cluster resolution (sigma_x,sigma_y)
+- Charge
+- Chi2
+- MC label if any
+- TClonesArray of associated pads stored in AliESDMuonPad objects for a given fraction of events
+
+The AliESDMuonPad objects contain:
+- Digit ID providing information about the location of the digit (DE ID, Manu ID, Manu channel and cathode)
+- Raw charge (ADC value)
+- Calibrated charge
+- One saturation bit and one calibration bit to say whether it is saturated/calibrated or not
+
+
+\section rec_s6 Conversion between MUON/ESD objects
+
+Every conversion between MUON objects (AliMUONVDigit/AliMUONVCluster/AliMUONTrack) and ESD objects
+(AliESDMuonPad/AliESDMuonCluster/AliESDMuonTrack) is done by the class AliMUONESDInterface. There are 2 ways of using this class:
+
+1) Using the static methods to convert the objects one by one (and possibly put them into the provided store):
+- Get track parameters at vertex, at DCA, ...:
+\verbatim
+ ...
+ AliESDMuonTrack* esdTrack = esd->GetMuonTrack(iTrack);
+ AliMUONTrackParam param;
+ AliMUONESDInterface::GetParamAtVertex(*esdTrack, param);
+\endverbatim
+
+- Convert an AliMUONVDigit to an AliESDMuonPad:
+\verbatim
+ ...
+ AliMUONVDigit *digit = ...;
+ AliESDMuonPad esdPad;
+ AliMUONESDInterface::MUONToESD(*digit, esdPad);
+\endverbatim
+
+- Convert an AliMUONLocalTrigger to a ghost AliESDMuonTrack (containing only trigger informations):
+\verbatim
+ ...
+ AliMUONLocalTrigger* locTrg = ...;
+ AliMUONTriggerTrack* triggerTrack = ...;
+ AliESDMuonTrack esdTrack;
+ AliMUONESDInterface::MUONToESD(*locTrg, esdTrack, trackId, triggerTrack);
+\endverbatim
+
+- Convert an AliESDMuonTrack to an AliMUONTrack:
+\verbatim
+ ...
+ AliESDMuonTrack* esdTrack = esd->GetMuonTrack(iTrack);
+ AliMUONTrack track;
+ AliMUONESDInterface::ESDToMUON(*esdTrack, track);
+\endverbatim
+
+- Add an AliESDMuonTrack (converted into AliMUONTrack object) into an AliMUONVTrackStore:
+\verbatim
+ ...
+ AliESDMuonTrack* esdTrack = esd->GetMuonTrack(iTrack);
+ AliMUONVTrackStore *trackStore = AliMUONESDInteface::NewTrackStore();
+ AliMUONTrack* trackInStore = AliMUONESDInterface::Add(*esdTrack, *trackStore);
+\endverbatim
+
+2) Loading an entire ESDEvent and using the finders and/or the iterators to access the corresponding MUON objects:
+- First load the ESD event:
+\verbatim
+ AliMUONESDInterface esdInterface;
+ esdInterface.LoadEvent(*esd);
+\endverbatim
+
+- Get the track store:
+\verbatim
+ AliMUONVTrackStore* trackStore = esdInterface.GetTracks();
+\endverbatim
+
+- Access the number of digits in a particular cluster:
+\verbatim
+ Int_t nDigits = esdInterface.GetNDigitsInCluster(clusterId);
+\endverbatim
+
+- Find a particular digit using its ID:
+\verbatim
+ AliMUONVDigit *digit = esdInterface.FindDigit(digitId);
+\endverbatim
+
+- Find a particular cluster in a given track using their IDs:
+\verbatim
+ AliMUONVCluster* cluster = esdInterface.FindCluster(trackId, clusterId);
+\endverbatim
+
+- Iterate over all clusters of a particular track using an iterator:
+\verbatim
+ TIterator* nextCluster = esdInterface.CreateClusterIterator(trackId);
+ while ((cluster = static_cast<AliMUONVCluster*>(nextCluster()))) {...}
+\endverbatim
+
+Note: You can change (via static method) the type of the store this class is using:
+\verbatim
+ AliMUONESDInterface::UseTrackStore("name");
+ AliMUONESDInterface::UseClusterStore("name");
+ AliMUONESDInterface::UseDigitStore("name");
+ AliMUONESDInterface::UseTriggerStore("name");
+\endverbatim
+
+
+\section rec_s7 ESD cluster/track refitting
+
+We can re-clusterize and re-track the clusters/tracks stored into the ESD by using the class AliMUONRefitter. This class gets the MUON objects
+to be refitted from an instance of AliMUONESDInterface (see section @ref rec_s6), then uses the reconstruction framework to refit the
+objects. The reconstruction parameters are still set via the class AliMUONRecoParam (see section @ref rec_s5). The initial data are not changed.
+Results are stored into new MUON objects. The aim of the refitting is to be able to study effects of changing the reconstruction parameter, the
+calibration parameters or the alignment without re-running the entire reconstruction.
+
+To use this class we first have to connect it to the ESD interface containing MUON objects:
+\verbatim
+ AliMUONRefitter refitter;
+ refitter.Connect(&esdInterface);
+\endverbatim
+
+We can then:
+- Re-clusterize the ESD clusters using the attached ESD pads (several new clusters can be reconstructed per ESD cluster):
+\verbatim
+ AliMUONVClusterStore* clusterStore = refitter.ReClusterize(iTrack, iCluster);
+ AliMUONVClusterStore* clusterStore = refitter.ReClusterize(clusterId);
+\endverbatim
+
+- Re-fit the ESD tracks using the attached ESD clusters:
+\verbatim
+ AliMUONTrack* track = refitter.RetrackFromClusters(iTrack);
+ AliMUONVTrackStore* trackStore = refitter.ReconstructFromClusters();
+\endverbatim
+
+- Reconstruct the ESD tracks from ESD pads (i.e. re-clusterize the attached clusters). Consider all the combination of clusters and return only
+ the best one:
+\verbatim
+ AliMUONTrack* track = refitter.RetrackFromDigits(iTrack);
+ AliMUONVTrackStore* trackStore = refitter.ReconstructFromDigits();
+\endverbatim
+
+The macro MUONRefit.C is an example of using this class. The results are stored in a new AliESDs.root file.
+
This chapter is defined in the READMErec.txt file.
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff