/* History of cvs commits:
*
* $Log$
- * Revision 1.105 2007/01/12 21:44:29 kharlov
- * Simulate and reconstruct two gains simulaneouslsy
- *
- * Revision 1.104 2006/11/23 13:40:44 hristov
- * Common class for raw data reading and ALTRO mappiing for PHOS and EMCAL (Gustavo, Cvetan)
- *
- * Revision 1.103 2006/11/14 17:11:15 hristov
- * Removing inheritances from TAttLine, TAttMarker and AliRndm in AliModule. The copy constructor and assignment operators are moved to the private part of the class and not implemented. The corresponding changes are propagated to the detectors
- *
- * Revision 1.102 2006/10/27 17:14:27 kharlov
- * Introduce AliDebug and AliLog (B.Polichtchouk)
- *
- * Revision 1.101 2006/10/13 06:47:29 kharlov
- * Simulation of RAW data applies real mapping (B.Polichtchouk)
- *
- * Revision 1.100 2006/08/11 12:36:26 cvetan
- * Update of the PHOS code needed in order to read and reconstruct the beam test raw data (i.e. without an existing galice.root)
+ * Revision 1.116 2007/10/10 09:05:10 schutz
+ * Changing name QualAss to QA
*
- * Revision 1.99 2006/06/28 11:36:09 cvetan
- * New detector numbering scheme (common for DAQ/HLT/Offline). All the subdetectors shall use the AliDAQ class for the sim and rec of the raw data. The AliDAQ and raw reader classes now provide all the necessary interfaces to write and select the detector specific raw-data payload. Look into the AliDAQ.h and AliRawReader.h for more details.
+ * Revision 1.115 2007/08/22 09:20:50 hristov
+ * Updated QA classes (Yves)
*
- * Revision 1.98 2006/05/11 11:30:48 cvetan
- * Major changes in AliAltroBuffer. Now it can be used only for writing of raw data. All the corresponding read method are removed. It is based now on AliFstream in order to avoid endianess problems. The altro raw data is written always with little endian
+ * Revision 1.114 2007/08/07 14:12:03 kharlov
+ * Quality assurance added (Yves Schutz)
*
- * Revision 1.97 2006/04/22 10:30:17 hristov
- * Add fEnergy to AliPHOSDigit and operate with EMC amplitude in energy units (Yu.Kharlov)
+ * Revision 1.113 2007/07/18 16:29:54 policheh
+ * Raw Sdigits energy converted to GeV.
*
- * Revision 1.96 2006/04/07 08:41:59 hristov
- * Follow AliAlignObj framework and remove AliPHOSAlignData (Yu.Kharlov)
+ * Revision 1.112 2007/02/25 22:59:13 policheh
+ * Digits2Raw(): ALTRO buffer and mapping created per each DDL.
*
- * Revision 1.95 2006/03/14 19:40:41 kharlov
- * Remove De-digitizing of raw data and digitizing the raw data fit
+ * Revision 1.111 2007/02/18 15:21:47 kharlov
+ * Corrections for memory leak in Digits2Raw due to AliAltroMapping
*
- * Revision 1.94 2006/03/07 18:56:25 kharlov
- * CDB is passed via environment variable
+ * Revision 1.110 2007/02/13 10:52:08 policheh
+ * Raw2SDigits() implemented
*
- * Revision 1.93 2005/11/22 08:45:11 kharlov
- * Calibration is read from CDB if any (Boris Polichtchouk)
+ * Revision 1.109 2007/02/05 10:43:25 hristov
+ * Changes for correct initialization of Geant4 (Mihaela)
*
- * Revision 1.92 2005/11/03 13:09:19 hristov
- * Removing meaningless const declarations (linuxicc)
+ * Revision 1.108 2007/02/01 10:34:47 hristov
+ * Removing warnings on Solaris x86
*
- * Revision 1.91 2005/07/27 15:08:53 kharlov
- * Mixture ArCO2 is corrected
+ * Revision 1.107 2007/01/29 16:29:37 kharlov
+ * Digits2Raw(): special workaround for digits with time out of range
*
- * Revision 1.90 2005/06/17 07:39:07 hristov
- * Removing GetDebug and SetDebug from AliRun and AliModule. Using AliLog for the messages
- *
- * Revision 1.89 2005/05/28 12:10:07 schutz
- * Copy constructor is corrected (by T.P.)
+ * Revision 1.106 2007/01/17 17:28:56 kharlov
+ * Extract ALTRO sample generation to a separate class AliPHOSPulseGenerator
*
+ * Revision 1.105 2007/01/12 21:44:29 kharlov
+ * Simulate and reconstruct two gains simulaneouslsy
*/
//_________________________________________________________________________
// --- AliRoot header files ---
#include "AliMagF.h"
#include "AliPHOS.h"
-#include "AliPHOSGetter.h"
+#include "AliPHOSLoader.h"
#include "AliRun.h"
#include "AliPHOSDigitizer.h"
#include "AliPHOSSDigitizer.h"
#include "AliPHOSCalibData.h"
#include "AliPHOSPulseGenerator.h"
#include "AliDAQ.h"
+#include "AliPHOSRawDecoder.h"
+#include "AliPHOSRawDigiProducer.h"
+#include "AliPHOSQAChecker.h"
+#include "AliPHOSRecoParamEmc.h"
+#include "AliPHOSSimParam.h"
+#include "AliPHOSCpvRawWrite.h"
ClassImp(AliPHOS)
Float_t aG10[4] = { 12., 1., 16., 28.} ;
Float_t zG10[4] = { 6., 1., 8., 14.} ;
Float_t wG10[4] = { .259, .288, .248, .205} ;
- Float_t dG10 = 1.7 ;
+ Float_t dG10 = 1.7 ;
+
AliMixture(12, "G10$", aG10, zG10, dG10, -4, wG10);
wArCO[1] = (1-arContent)*1;
wArCO[2] = (1-arContent)*2;
Float_t dArCO = arContent*dAr + (1-arContent)*dCO ;
- AliMixture(16, "ArCO2$", aArCO, zArCO, dArCO, -3, wArCO) ;
+ AliMixture(16, "ArCO2$", aArCO, zArCO, dArCO, -3, wArCO) ;
+
// --- Stainless steel (let it be pure iron) ---
AliMaterial(17, "Steel$", 55.845, 26, 7.87, 1.76, 0., 0, 0) ;
// DEFINITION OF THE TRACKING MEDIA
// for PHOS: idtmed[699->798] equivalent to fIdtmed[0->100]
- Int_t * idtmed = fIdtmed->GetArray() - 699 ;
Int_t isxfld = gAlice->Field()->Integ() ;
Float_t sxmgmx = gAlice->Field()->Max() ;
// Air -> idtmed[798]
AliMedium(99, "Air $", 99, 0,
isxfld, sxmgmx, 10.0, 1.0, 0.1, 0.1, 10.0, 0, 0) ;
+}
+//_____________________________________________________________________________
+void AliPHOS::Init()
+{
+ //
+ // Initialises cuts for PHOS
+ //
// --- Set decent energy thresholds for gamma and electron tracking
+ Int_t * idtmed = fIdtmed->GetArray() - 699 ;
// Tracking threshold for photons and electrons in the scintillator crystal
gMC->Gstpar(idtmed[699], "CUTGAM",0.5E-4) ;
gMC->Gstpar(idtmed[715], "LOSS",2.) ;
gMC->Gstpar(idtmed[715], "DRAY",0.) ;
gMC->Gstpar(idtmed[715], "STRA",2.) ;
-
}
//____________________________________________________________________________
{
// convert digits of the current event to raw data
+ if(AliPHOSSimParam::GetInstance()->IsEDigitizationOn()){
+ AliError("Energy digitization should be OFF if use Digits2Raw") ;
+ }
+
AliPHOSLoader * loader = dynamic_cast<AliPHOSLoader*>(fLoader) ;
// get the digits
return;
}
+ // get mapping from OCDB
+ const TObjArray* maps = AliPHOSRecoParamEmc::GetMappings();
+ if(!maps) AliFatal("Cannot retrieve ALTRO mappings!!");
+
// some digitization constants
const Float_t kThreshold = 0.001; // skip digits below 1 MeV
const Int_t kAdcThreshold = 1; // Lower ADC threshold to write to raw data
- AliAltroBuffer* buffer = NULL;
Int_t prevDDL = -1;
// Create a shaper pulse object
AliPHOSPulseGenerator *pulse = new AliPHOSPulseGenerator();
-
+
Int_t *adcValuesLow = new Int_t[pulse->GetRawFormatTimeBins()];
Int_t *adcValuesHigh= new Int_t[pulse->GetRawFormatTimeBins()];
+
+ const Int_t maxDDL = 20;
+ AliAltroBuffer *buffer[maxDDL];
+ AliAltroMapping *mapping[maxDDL];
+
+ for(Int_t jDDL=0; jDDL<maxDDL; jDDL++) {
+ buffer[jDDL]=0;
+ mapping[jDDL]=0;
+ }
//!!!!for debug!!!
Int_t modMax=-111;
Float_t eMax=-333;
//!!!for debug!!!
+ TObjArray *cpvDigitsAll = new TObjArray();
+ TClonesArray *cpvDigitsModule;
+ Int_t *nCPVdigits = new Int_t[geom->GetNModules()];
+ Int_t module;
+ for (module=0; module<geom->GetNModules(); module++) {
+ cpvDigitsAll->Add(new TClonesArray("AliPHOSDigit",100));
+ nCPVdigits[module] = 0;
+ }
+
// loop over digits (assume ordered digits)
for (Int_t iDigit = 0; iDigit < digits->GetEntries(); iDigit++) {
AliPHOSDigit* digit = dynamic_cast<AliPHOSDigit *>(digits->At(iDigit)) ;
+
+ // Skip small energy below treshold
if (digit->GetEnergy() < kThreshold)
continue;
+
Int_t relId[4];
geom->AbsToRelNumbering(digit->GetId(), relId);
- Int_t module = relId[0];
+ module = relId[0];
+
+ // Fill TObjArray of TClonesArray's with CPV digits per module
+ if (digit->GetId() > geom->GetNModules() * geom->GetNCristalsInModule()) {
+ cpvDigitsModule = (TClonesArray*)cpvDigitsAll->At(module-1);
+ new((*cpvDigitsModule)[nCPVdigits[module-1]++])
+ AliPHOSDigit(-1,digit->GetId(),digit->GetAmp(),digit->GetTime());
+ continue;
+ }
+
// Begin FIXME
if (relId[1] != 0)
// new DDL
if (iDDL != prevDDL) {
- // write real header and close previous file
- if (buffer) {
- buffer->Flush();
- buffer->WriteDataHeader(kFALSE, kFALSE);
- delete buffer;
+ if (buffer[iDDL] == 0) {
+ // open new file and write dummy header
+ TString fileName = AliDAQ::DdlFileName("PHOS",iDDL);
+
+ TString path = gSystem->Getenv("ALICE_ROOT");
+ path += "/PHOS/mapping/RCU";
+ path += iRCU;
+ path += ".data";
+
+ mapping[iDDL] = (AliAltroMapping*)maps->At(iRCU);
+ buffer[iDDL] = new AliAltroBuffer(fileName.Data(),mapping[iDDL]);
+ buffer[iDDL]->WriteDataHeader(kTRUE, kFALSE); //Dummy;
}
-
- // open new file and write dummy header
- TString fileName = AliDAQ::DdlFileName("PHOS",iDDL);
-
- TString path = gSystem->Getenv("ALICE_ROOT");
- path += "/PHOS/mapping/RCU";
- path += iRCU;
- path += ".data";
-
- AliAltroMapping* mapping = new AliCaloAltroMapping(path.Data());
- buffer = new AliAltroBuffer(fileName.Data(),mapping);
- buffer->WriteDataHeader(kTRUE, kFALSE); //Dummy;
-
prevDDL = iDDL;
}
- // out of time range signal (?)
- if (digit->GetTimeR() > pulse->GetRawFormatTimeMax() ) {
+ AliDebug(2,Form("digit E=%.4f GeV, t=%g s, (mod,col,row)=(%d,%d,%d)\n",
+ digit->GetEnergy(),digit->GetTimeR(),
+ relId[0]-1,relId[3]-1,relId[2]-1));
+ // if a signal is out of time range, write only trailer
+ if (digit->GetTimeR() > pulse->GetRawFormatTimeMax()*0.5 ) {
AliInfo("Signal is out of time range.\n");
- buffer->FillBuffer((Int_t)digit->GetEnergy());
- buffer->FillBuffer(pulse->GetRawFormatTimeBins() ); // time bin
- buffer->FillBuffer(3); // bunch length
- buffer->WriteTrailer(3, relId[3], relId[2], module); // trailer
+ buffer[iDDL]->FillBuffer(0);
+ buffer[iDDL]->FillBuffer(pulse->GetRawFormatTimeBins() ); // time bin
+ buffer[iDDL]->FillBuffer(3); // bunch length
+ buffer[iDDL]->WriteTrailer(3, relId[3]-1, relId[2]-1, 0); // trailer
// calculate the time response function
} else {
Double_t energy = 0 ;
- Int_t module = relId[0];
- if ( digit->GetId() <= geom->GetNModules() * geom->GetNCristalsInModule()) {
+ module = relId[0];
+ if (digit->GetId() <= geom->GetNModules() * geom->GetNCristalsInModule()) {
energy=digit->GetEnergy();
- AliDebug(2,Form("digit energy: %f\n",digit->GetEnergy()));
if(energy>eMax) {eMax=energy; modMax=module; colMax=col; rowMax=row;}
}
else {
energy = 0; // CPV raw data format is now know yet
- }
+ }
pulse->SetAmplitude(energy);
pulse->SetTZero(digit->GetTimeR());
pulse->MakeSamples();
pulse->GetSamples(adcValuesHigh, adcValuesLow) ;
-
- buffer->WriteChannel(relId[3]-1, relId[2]-1, 0,
+ buffer[iDDL]->WriteChannel(relId[3]-1, relId[2]-1, 0,
pulse->GetRawFormatTimeBins(), adcValuesLow , kAdcThreshold);
- buffer->WriteChannel(relId[3]-1, relId[2]-1, 1,
+ buffer[iDDL]->WriteChannel(relId[3]-1, relId[2]-1, 1,
pulse->GetRawFormatTimeBins(), adcValuesHigh, kAdcThreshold);
-
}
}
// write real header and close last file
- if (buffer) {
- buffer->Flush();
- buffer->WriteDataHeader(kFALSE, kFALSE);
- delete buffer;
+ for (Int_t iDDL=0; iDDL<maxDDL; iDDL++) {
+ if (buffer[iDDL]) {
+ buffer[iDDL]->Flush();
+ buffer[iDDL]->WriteDataHeader(kFALSE, kFALSE);
+ delete buffer[iDDL];
+ //if (mapping[iDDL]) delete mapping[iDDL];
+ }
}
AliDebug(1,Form("Digit with max. energy: modMax %d colMax %d rowMax %d eMax %f\n",
modMax,colMax,rowMax,eMax));
delete pulse;
+
+ for (module=0; module<geom->GetNModules(); module++) {
+ AliDebug(2,Form("Number of CPV digits in module %d: %d/%d",
+ module,
+ ((TClonesArray*)cpvDigitsAll->At(module))->GetEntriesFast(),
+ nCPVdigits[module]));
+ }
+ AliPHOSCpvRawWrite *cpvRaw = new AliPHOSCpvRawWrite();
+ cpvRaw->WriteRaw(cpvDigitsAll);
+ delete cpvRaw;
loader->UnloadDigits();
}
AliPHOSSDigitizer phosDigitizer(fLoader->GetRunLoader()->GetFileName().Data()) ;
phosDigitizer.SetEventRange(0, -1) ; // do all the events
+
phosDigitizer.ExecuteTask("all") ;
}
+
//____________________________________________________________________________
AliLoader* AliPHOS::MakeLoader(const char* topfoldername)
{
}
}
+//____________________________________________________________________________
+Bool_t AliPHOS::Raw2SDigits(AliRawReader* rawReader)
+{
+
+ AliPHOSLoader * loader = dynamic_cast<AliPHOSLoader*>(fLoader) ;
+
+ TTree * tree = 0 ;
+ tree = loader->TreeS() ;
+ if ( !tree ) {
+ loader->MakeTree("S");
+ tree = loader->TreeS() ;
+ }
+
+ TClonesArray * sdigits = loader->SDigits() ;
+ if(!sdigits) {
+ loader->MakeSDigitsArray();
+ sdigits = loader->SDigits();
+ }
+ sdigits->Clear();
+
+ AliPHOSRawDecoder dc(rawReader);
+ AliPHOSRawDigiProducer pr;
+ pr.MakeDigits(sdigits,&dc);
+
+ Int_t bufferSize = 32000 ;
+ // TBranch * sdigitsBranch = tree->Branch("PHOS",&sdigits,bufferSize);
+ tree->Branch("PHOS",&sdigits,bufferSize);
+ tree->Fill();
+
+ fLoader->WriteSDigits("OVERWRITE");
+ return kTRUE;
+
+}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff