* provided "as is" without express or implied warranty. *
**************************************************************************/
-/*
-$Log$
-Revision 1.2 1999/09/29 09:24:28 fca
-Introduction of the Copyright and cvs Log
-
-*/
+// $Id$
///////////////////////////////////////////////////////////////////////////
// Class AliSignal
-// Handling of ALICE (extrapolated) signals.
+// Generic handling of (extrapolated) detector signals.
+//
+// The user can decide to store either calibrated or uncalibrated signals.
+// Via the specification of a gain and offset or/and an explicit
+// (de)calibration function both calibrated and uncalibrated signals
+// can always be obtained. For details see the documentation of the
+// memberfunction GetSignal() and the class AliAttrib.
+// The explicit specification of a (de)calibration function offers the
+// maximum flexibility and also allows automatic indication whether
+// calibrated or uncalibrated data has been stored.
+// The latter can be achieved by only specifying a calibration function
+// (and no de-calibration function) in case uncalibrated data is stored,
+// whereas in case of stored calibrated data the user should only
+// provide a de-calibration function (and no calibration function).
//
// Note :
// ------
// ---------
//
// AliSignal s;
+// s.SetName("Start counter");
// Float_t pos[3]={-1,25,7};
// Float_t err[3]={0.03,0.7,0.18};
// Float_t signal=120.8;
// Float_t error=1.73;
+// Float_t offset=-12.78;
+// Float_t gain=250;
// s.SetPosition(pos,"car");
// s.SetPositionErrors(err,"car");
// s.SetSignal(signal);
// s.SetSignalError(error);
+// s.SetOffset(offset);
+// s.SetGain(gain);
// Float_t loc[3],dr[3],sigma;
// s.GetPosition(loc,"sph");
// s.GetPositionErrors(dr,"sph");
// Float_t adc=s.GetSignal();
// Float_t sigma=s.GetSignalError();
//
-// AliSignal q(3); // q can store 3 signal values with their errors
-// // In the example below a signal contains the
+// AliSignal q; // In the example below a signal contains the
// // following data : timing, ADC and dE/dx
+// q.SetNameTitle("Hybrid","Test for multiple signal data");
// q.SetPosition(pos,"car");
// q.SetPositionErrors(err,"car");
-// signal=82.5; // e.q. signal time in ns
+// signal=82.5; // e.g. signal time in ns
// error=2.01;
+// offset=0.003;
+// q.SetSlotName("TOF",1);
// q.SetSignal(signal,1);
// q.SetSignalError(error,1);
+// q.SetOffset(offset,1);
// signal=268.1; // e.g. ADC value of signal
// error=3.75;
-// q.SetSignal(signal,2);
-// q.SetSignalError(error,2);
+// gain=120.78;
+// offset=1.5732;
+// // Addressing via name specification instead of index
+// q.SetSlotName("ADC",2);
+// q.SetSignal(signal,"ADC");
+// q.SetSignalError(error,"ADC");
+// q.SetGain(gain,"ADC");
+// q.SetOffset(offset,"ADC");
// signal=23.7; // e.g. corresponding dE/dx value
// error=0.48;
-// q.SetSignal(signal,3);
-// q.SetSignalError(error,3);
+// TF1 f=("calib","[0]*pow(x,2)+[1]"); // dE/dx calib. function
+// f.SetParameter(0,3.285);
+// f.SetParameter(1,-18.67);
+// q.SetSlotName("dE/dx",3);
+// q.SetCalFunction(&f,"dE/dx");
+// q.SetSignal(signal,"dE/dx");
+// q.SetSignalError(error,"dE/dx");
+//
+// // Signal retrieval with various (de)calibration modes
+// Float_t tof=q.GetSignal("TOF");
+// Float_t adc=q.GetSignal("ADC",1);
+// Float_t dedx=q.GetSignal("dE/dx",3);
//
//--- Author: Nick van Eijndhoven 23-jan-1999 UU-SAP Utrecht
-//- Modified: NvE 30-oct-1999 UU-SAP Utrecht
+//- Modified: NvE $Date$ UU-SAP Utrecht
///////////////////////////////////////////////////////////////////////////
#include "AliSignal.h"
+#include "AliTrack.h"
+#include "Riostream.h"
ClassImp(AliSignal) // Class implementation to enable ROOT I/O
-AliSignal::AliSignal(Int_t n)
+AliSignal::AliSignal() : TNamed(),AliPosition(),AliAttrib()
{
// Creation of an AliSignal object and initialisation of parameters.
-// A total of n (default n=1) values (with errors) can be stored.
- fNvalues=n;
- fSignal=0;
- fDsignal=0;
+// Several signal values (with errors) can be stored in different slots.
+// If needed, the storage for values (and errors) will be expanded automatically
+// when entering values and/or errors.
+ fSignals=0;
+ fDsignals=0;
+ fWaveforms=0;
+ fLinks=0;
+ fDevice=0;
}
///////////////////////////////////////////////////////////////////////////
AliSignal::~AliSignal()
{
// Destructor to delete dynamically allocated memory
- if (fSignal)
+ if (fSignals)
+ {
+ delete fSignals;
+ fSignals=0;
+ }
+ if (fDsignals)
+ {
+ delete fDsignals;
+ fDsignals=0;
+ }
+ if (fWaveforms)
{
- delete fSignal;
- fSignal=0;
+ delete fWaveforms;
+ fWaveforms=0;
}
- if (fDsignal)
+ if (fLinks)
{
- delete fDsignal;
- fDsignal=0;
+ // Remove this signal from all related tracks
+ for (Int_t i=1; i<=fLinks->GetNobjects(); i++)
+ {
+ TObject* obj=fLinks->GetObject(i);
+ if (!obj) continue;
+ if (obj->InheritsFrom("AliTrack"))
+ {
+ AliTrack* tx=(AliTrack*)obj;
+ tx->RemoveSignal(*this);
+ }
+ }
+ delete fLinks;
+ fLinks=0;
}
}
///////////////////////////////////////////////////////////////////////////
-void AliSignal::Reset()
+AliSignal::AliSignal(const AliSignal& s) : TNamed(s),AliPosition(s),AliAttrib(s)
+{
+// Copy constructor
+ fSignals=0;
+ fDsignals=0;
+ fWaveforms=0;
+ fLinks=0;
+
+ // Don't copy the owning device pointer for the copy
+ fDevice=0;
+
+ Int_t n=s.GetNvalues();
+ Double_t val;
+ for (Int_t i=1; i<=n; i++)
+ {
+ val=s.GetSignal(i);
+ SetSignal(val,i);
+ }
+
+ n=s.GetNerrors();
+ for (Int_t j=1; j<=n; j++)
+ {
+ val=s.GetSignalError(j);
+ SetSignalError(val,j);
+ }
+
+ n=s.GetNwaveforms();
+ for (Int_t k=1; k<=n; k++)
+ {
+ TH1F* hist=s.GetWaveform(k);
+ if (hist) SetWaveform(hist,k);
+ }
+
+ TArrayI slotarr;
+ TArrayI posarr;
+ TObject* dum=0;
+ n=s.GetIndices(dum,slotarr,posarr);
+ Int_t slot,pos;
+ for (Int_t idx=0; idx<n; idx++)
+ {
+ slot=slotarr.At(idx);
+ pos=posarr.At(idx);
+ TObject* obj=s.GetLink(slot,pos);
+ if (obj) SetLink(obj,slot,pos);
+ }
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::Reset(Int_t mode)
{
// Reset all signal and position values and errors to 0.
-// The data arrays are also created if not already existing.
+//
+// mode = 0 Reset position and all signal values and their errors to 0.
+// The waveform histograms are reset, but the calibration
+// constants (i.e. gains and offsets) are kept.
+// 1 Reset position and delete the signal and error storage arrays.
+// Also the waveform histograms, gains and offset arrays are deleted.
+//
+// The default when invoking Reset() corresponds to mode=0.
+//
+// Note : In all cases the storage of the various links will be reset.
+// The UniqueID, name and title will NOT be reset.
+// In case the user wants to reset these attributes, this has to
+// be done explicitly via the SET facilities.
+//
+// The usage of mode=0 allows to re-use the allocated memory for new
+// signal (and error) values. This behaviour is preferable (i.e. faster)
+// in case the various signals always contain the same number of values
+// and have the same calibration constants.
+// The usage of mode=1 is slower, but allows a more efficient memory
+// occupation (and smaller output file size) in case the different
+// signals have a variable number of values.
+//
+// For more specific actions see ResetPosition(), ResetSignals(),
+// DeleteSignals(), ResetGain(), ResetOffset(), ResetLink(), ResetWaveform(),
+// DeleteWaveform() and DeleteCalibrations().
+//
- if (!fSignal) fSignal=new TArrayF(fNvalues);
- if (!fDsignal) fDsignal=new TArrayF(fNvalues);
+ if (mode<0 || mode>1)
+ {
+ cout << " *AliSignal::Reset* Invalid argument mode = " << mode << endl;
+ cout << " Default mode=0 will be used." << endl;
+ mode=0;
+ }
- Double_t r[3]={0,0,0};
- SetPosition(r,"sph");
- SetErrors(r,"car");
- for (Int_t i=0; i<fSignal->GetSize(); i++)
+ ResetPosition();
+ if (!mode)
{
- fSignal->AddAt(0,i);
- fDsignal->AddAt(0,i);
+ ResetSignals();
}
+ else
+ {
+ DeleteSignals();
+ DeleteCalibrations();
+ }
+
+ if (fLinks) fLinks->Reset();
+ fDevice=0;
}
///////////////////////////////////////////////////////////////////////////
-void AliSignal::ResetSignals()
+void AliSignal::ResetSignals(Int_t mode)
{
-// Reset all signal values and errors to 0.
-// The data arrays are also created if not already existing.
+// Reset various signal data according to user selection.
+//
+// mode = 0 Reset all signal values and their errors to 0.
+// 1 Reset only signal values
+// 2 Reset only signal errors
+//
+// The default when invoking ResetSignals() corresponds to mode=0.
+//
+// Irrespective of the mode, the waveform histograms are reset.
+
+ if (mode<0 || mode>2)
+ {
+ cout << " *AliSignal::ResetSignals* Invalid argument mode = " << mode << endl;
+ cout << " Default mode=0 will be used." << endl;
+ mode=0;
+ }
- if (!fSignal) fSignal=new TArrayF(fNvalues);
- if (!fDsignal) fDsignal=new TArrayF(fNvalues);
+ if (fSignals && (mode==0 || mode==1))
+ {
+ for (Int_t i=0; i<fSignals->GetSize(); i++)
+ {
+ fSignals->AddAt(0,i);
+ }
+ }
- for (Int_t i=0; i<fSignal->GetSize(); i++)
+ if (fDsignals && (mode==0 || mode==2))
{
- fSignal->AddAt(0,i);
- fDsignal->AddAt(0,i);
+ for (Int_t j=0; j<fDsignals->GetSize(); j++)
+ {
+ fDsignals->AddAt(0,j);
+ }
}
+
+ ResetWaveform(0);
}
///////////////////////////////////////////////////////////////////////////
-void AliSignal::ResetPosition()
+void AliSignal::DeleteSignals(Int_t mode)
{
-// Reset position and errors to 0.
- Double_t r[3]={0,0,0};
- SetPosition(r,"sph");
- SetErrors(r,"car");
+// Delete storage arrays of various signal data according to user selection.
+//
+// mode = 0 Delete arrays of both signal values and their errors.
+// 1 Delete only signal values array
+// 2 Delete only signal errors array
+//
+// The default when invoking DeleteSignals() corresponds to mode=0.
+//
+// Irrespective of the mode, the waveform histograms are deleted.
+
+ if (mode<0 || mode>2)
+ {
+ cout << " *AliSignal::DeleteSignals* Invalid argument mode = " << mode << endl;
+ cout << " Default mode=0 will be used." << endl;
+ mode=0;
+ }
+
+ if (fSignals && (mode==0 || mode==1))
+ {
+ delete fSignals;
+ fSignals=0;
+ }
+
+ if (fDsignals && (mode==0 || mode==2))
+ {
+ delete fDsignals;
+ fDsignals=0;
+ }
+
+ DeleteWaveform(0);
}
///////////////////////////////////////////////////////////////////////////
void AliSignal::SetSignal(Double_t sig,Int_t j)
{
-// Store j-th (default j=1) signal value.
-// Note : The first signal value is at j=1.
+// Store signal value for the j-th (default j=1) slot.
+// Note : The first signal slot is at j=1.
+// In case the value of the index j exceeds the maximum number of reserved
+// slots for signal values, the number of reserved slots for the
+// signal values is increased automatically.
- if (!fSignal) ResetSignals();
-
- Int_t size=fSignal->GetSize();
- if (j<=size)
+ if (!fSignals)
{
- fSignal->AddAt(float(sig),j-1);
+ fSignals=new TArrayF(j);
+ ResetSignals(1);
}
- else
+
+ Int_t size=fSignals->GetSize();
+
+ if (j>size)
{
- cout << "*AliSignal::SetSignal* Index mismatch j : " << j
- << " size : " << size << endl;
+ fSignals->Set(j);
}
+
+ fSignals->AddAt(float(sig),j-1);
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::SetSignal(Double_t sig,TString name)
+{
+// Store signal value for the name-specified slot.
+//
+// This procedure involves a slot-index search based on the specified name
+// at each invokation. This may become slow in case many slots have been
+// defined and/or when this procedure is invoked many times.
+// In such cases it is preferable to use indexed addressing in the user code
+// either directly or via a few invokations of GetSlotIndex().
+
+ Int_t j=GetSlotIndex(name);
+ if (j>0) SetSignal(sig,j);
}
///////////////////////////////////////////////////////////////////////////
void AliSignal::AddSignal(Double_t sig,Int_t j)
{
-// Add value to j-th (default j=1) signal value.
-// Note : The first signal value is at j=1.
+// Add value to the signal of the j-th (default j=1) slot.
+// Note : The first signal slot is at j=1.
+// In case the value of the index j exceeds the maximum number of reserved
+// slots for signal values, the number of reserved slots for the
+// signal values is increased automatically.
+
+ if (!fSignals)
+ {
+ fSignals=new TArrayF(j);
+ ResetSignals(1);
+ }
+
+ Int_t size=fSignals->GetSize();
+
+ if (j>size)
+ {
+ fSignals->Set(j);
+ }
+
+ Float_t sum=(fSignals->At(j-1))+sig;
+ fSignals->AddAt(sum,j-1);
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::AddSignal(Double_t sig,TString name)
+{
+// Add value to the signal of the name-specified slot.
+//
+// This procedure involves a slot-index search based on the specified name
+// at each invokation. This may become slow in case many slots have been
+// defined and/or when this procedure is invoked many times.
+// In such cases it is preferable to use indexed addressing in the user code
+// either directly or via a few invokations of GetSlotIndex().
+
+ Int_t j=GetSlotIndex(name);
+ if (j>0) AddSignal(sig,j);
+}
+///////////////////////////////////////////////////////////////////////////
+Float_t AliSignal::GetSignal(Int_t j,Int_t mode) const
+{
+// Provide signal value of the j-th (default j=1) slot.
+// Note : The first signal slot is at j=1.
+// In case no signal is present or the input argument "j" or "mode" is invalid,
+// the value 0 is returned.
+// The parameter "mode" allows for automatic (de)calibration of the signal
+// (e.g. gain etc... correction or via explicit (de)calibration functions).
+//
+// mode = 0 : Just the j-th signal is returned.
+// 1 : The j-th signal is corrected for the gain, offset, dead flag etc...
+// In case the j-th slot was marked dead, 0 is returned.
+// In case the gain value was not set, gain=1 will be assumed.
+// In case the gain value was 0, a signal value of 0 is returned.
+// In case the offset value was not set, offset=0 will be assumed.
+// 2 : Same as mode=1 but gain, offset dead flag etc... are taken from
+// the AliDevice which owns this AliSignal object.
+// The corresponding AliDevice slot is obtained via matching of
+// the slotnames. In case this fails, the slotindex "j" of the
+// input argument will be used.
+// In case this AliSignal object has no parent AliDevice, just
+// the j-th signal is returned (like with mode=0).
+// 3 : The j-th signal is corrected using the corresponding calibration
+// function.
+// In case the j-th slot was marked dead, 0 is returned.
+// In case no calibration function is present, just the j-th signal
+// is returned (like with mode=0).
+// 4 : Same as mode=3 but the calibration function and dead flag are
+// taken from the AliDevice which owns this AliSignal object.
+// The corresponding AliDevice slot is obtained via matching of
+// the slotnames. In case this fails, the slotindex "j" of the
+// input argument will be used.
+// 5 : Same as mode=2 but in case no parent AliDevice is present
+// an automatic switch to mode=1 will be made.
+// 6 : Same as mode=4 but in case no parent AliDevice is present
+// an automatic switch to mode=3 will be made.
+// 7 : Same as mode=3 but in case no calibration function is present
+// an automatic switch to mode=4 will be made.
+// 8 : Same as mode=7 but also the corresponding dead flag of the
+// parent device (if any) will be checked.
+// If either the dead flag of the requested signal slot of this
+// AliSignal object or the corresponding parent device slot is
+// set, 0 is returned.
+//
+// <0 : The corresponding de-correction or de-calibration is performed
+//
+// The corrected signal (sigc) is determined as follows :
+//
+// sigc=(signal/gain)-offset
+//
+// The de-corrected signal is determined as follows :
+//
+// signal=(sigc+offset)*gain
+//
+// The default is mode=0.
+
+ if (abs(mode)>8) return 0;
+
+ Int_t jcal=j;
+ Float_t sig=0;
+ Float_t gain=1;
+ Float_t offset=0;
+
+ // Get the corresponding slot index (and dead flag) of the parent device
+ Int_t pj=0;
+ Int_t pdead=0;
+ AliSignal* parent=(AliSignal*)GetDevice();
+ if ((abs(mode)==2 || abs(mode)>=4) && parent)
+ {
+ TString name=GetSlotName(j);
+ if (strlen(name.Data())) pj=parent->GetSlotIndex(name);
+ if (abs(mode)==8 && pj) pdead=parent->GetDeadValue(pj);
+ }
+ if (mode==8) mode=7;
+ if (mode==-8) mode=-7;
+
+ AliSignal* sx=(AliSignal*)this;
+
+ TF1* f=0;
+ if (mode==7)
+ {
+ f=sx->GetCalFunction(jcal);
+ if (f)
+ {
+ mode=3;
+ }
+ else
+ {
+ mode=4;
+ }
+ }
+ if (mode==-7)
+ {
+ f=sx->GetDecalFunction(jcal);
+ if (f)
+ {
+ mode=-3;
+ }
+ else
+ {
+ mode=-4;
+ }
+ }
+
+ if (abs(mode)==2 || abs(mode)>=4)
+ {
+ sx=(AliSignal*)GetDevice();
+ if (pj) jcal=pj;
+ }
+ if (!sx && abs(mode)>=5) sx=(AliSignal*)this;
+ if (mode==5) mode=2;
+ if (mode==-5) mode=-2;
+ if (mode==6) mode=3;
+ if (mode==-6) mode=-3;
+
+ if (fSignals)
+ {
+ if (j>0 && j<=(fSignals->GetSize()))
+ {
+ sig=fSignals->At(j-1);
+
+ if (mode==0 || !sx) return sig;
+
+ // Check for the dead flag setting
+ if (sx->GetDeadValue(jcal) || pdead) return 0;
+
+ // (De)correct the signal for the gain and offset
+ if (abs(mode)==1 || abs(mode)==2)
+ {
+ if (sx->GetGainFlag(jcal)) gain=sx->GetGain(jcal);
+ if (sx->GetOffsetFlag(jcal)) offset=sx->GetOffset(jcal);
+
+ if (fabs(gain)>0.)
+ {
+ if (mode>0) sig=(sig/gain)-offset; // Gain and offset correction
+ if (mode<0) sig=(sig+offset)*gain; // Gain and offset de-correction
+ }
+ else
+ {
+ sig=0;
+ }
+ return sig;
+ }
+
+ // (De)calibrate the signal with the corresponding (de)calibration function
+ if (abs(mode)==3 || abs(mode)==4)
+ {
+ f=sx->GetCalFunction(jcal);
+ if (mode<0) f=sx->GetDecalFunction(jcal);
+ if (f) sig=f->Eval(sig);
+ return sig;
+ }
+ }
+ else
+ {
+ cout << " *AliSignal::GetSignal* Index j = " << j << " invalid." << endl;
+ }
+ }
+ return sig;
+}
+///////////////////////////////////////////////////////////////////////////
+Float_t AliSignal::GetSignal(TString name,Int_t mode) const
+{
+// Provide signal value of the name-specified slot.
+// In case no signal is present, 0 is returned.
+// The parameter "mode" allows for automatic (de)calibration of the signal
+// (e.g. gain etc... correction or via explicit (de)calibration functions).
+// For further details about the (de)calibration modes, please refer to the
+// corresponding slot-index based memberfunction.
+//
+// The default is mode=0.
+//
+// This procedure involves a slot-index search based on the specified name
+// at each invokation. This may become slow in case many slots have been
+// defined and/or when this procedure is invoked many times.
+// In such cases it is preferable to use indexed addressing in the user code
+// either directly or via a few invokations of GetSlotIndex().
+
+ Int_t j=GetSlotIndex(name);
+ Float_t val=0;
+ if (j>0) val=GetSignal(j,mode);
+ return val;
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::SetSignalError(Double_t dsig,Int_t j)
+{
+// Store error on the signal for the j-th (default j=1) slot.
+// Note : The first signal slot is at j=1.
+// In case the value of the index j exceeds the maximum number of reserved
+// slots for signal error values, the number of reserved slots for the
+// signal errors is increased automatically.
+
+ if (!fDsignals)
+ {
+ fDsignals=new TArrayF(j);
+ ResetSignals(2);
+ }
+
+ Int_t size=fDsignals->GetSize();
+
+ if (j>size)
+ {
+ fDsignals->Set(j);
+ }
+
+ fDsignals->AddAt(float(dsig),j-1);
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::SetSignalError(Double_t dsig,TString name)
+{
+// Store error on the signal for the name-specified slot.
+//
+// This procedure involves a slot-index search based on the specified name
+// at each invokation. This may become slow in case many slots have been
+// defined and/or when this procedure is invoked many times.
+// In such cases it is preferable to use indexed addressing in the user code
+// either directly or via a few invokations of GetSlotIndex().
+
+ Int_t j=GetSlotIndex(name);
+ if (j>0) SetSignalError(dsig,j);
+}
+///////////////////////////////////////////////////////////////////////////
+Float_t AliSignal::GetSignalError(Int_t j) const
+{
+// Provide error on the signal of the j-th (default j=1) slot.
+// Note : The first signal slot is at j=1.
+// In case no signal is present or the argument j is invalid, 0 is returned.
+ Float_t err=0;
+ if (fDsignals)
+ {
+ if (j>0 && j<=(fDsignals->GetSize()))
+ {
+ err=fDsignals->At(j-1);
+ }
+ else
+ {
+ cout << " *AliSignal::GetSignalError* Index j = " << j << " invalid." << endl;
+ }
+ }
+ return err;
+}
+///////////////////////////////////////////////////////////////////////////
+Float_t AliSignal::GetSignalError(TString name) const
+{
+// Provide error on the signal of the name-specified slot.
+//
+// This procedure involves a slot-index search based on the specified name
+// at each invokation. This may become slow in case many slots have been
+// defined and/or when this procedure is invoked many times.
+// In such cases it is preferable to use indexed addressing in the user code
+// either directly or via a few invokations of GetSlotIndex().
+
+ Int_t j=GetSlotIndex(name);
+ Float_t val=0;
+ if (j>0) val=GetSignalError(j);
+ return val;
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::Data(TString f,TString u) const
+{
+// Provide all signal information within the coordinate frame f.
+//
+// The string argument "u" allows to choose between different angular units
+// in case e.g. a spherical frame is selected.
+// u = "rad" : angles provided in radians
+// "deg" : angles provided in degrees
+//
+// The defaults are f="car" and u="rad".
- if (!fSignal) ResetSignals();
+ const char* name=GetName();
+ const char* title=GetTitle();
- Int_t size=fSignal->GetSize();
- if (j<=size)
+ cout << " *" << ClassName() << "::Data* Id : " << GetUniqueID();
+ if (strlen(name)) cout << " Name : " << name;
+ if (strlen(title)) cout << " Title : " << title;
+ cout << endl;
+ cout << " Position";
+ AliPosition::Data(f,u);
+ if (fDevice)
{
- Float_t sum=(fSignal->At(j-1))+sig;
- fSignal->AddAt(sum,j-1);
+ const char* devname=fDevice->GetName();
+ const char* devtitle=fDevice->GetTitle();
+ cout << " Owned by device : " << fDevice->ClassName()
+ << " Id : " << fDevice->GetUniqueID();
+ if (strlen(devname)) cout << " Name : " << devname;
+ if (strlen(devtitle)) cout << " Title : " << devtitle;
+ cout << endl;
+ }
+
+ // Provide an overview of the stored waveforms
+ ListWaveform(-1);
+
+ // Provide an overview of all the data and attribute slots
+ List(-1);
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::List(Int_t j) const
+{
+// Provide signal information for the j-th slot.
+// The first slot is at j=1.
+// In case j=0 (default) the data of all slots will be listed.
+// In case j=-1 the data of all slots will be listed, but the header
+// information will be suppressed.
+
+ if (j<-1)
+ {
+ cout << " *AliSignal::List* Invalid argument j = " << j << endl;
+ return;
+ }
+
+ if (j != -1)
+ {
+ const char* name=GetName();
+ const char* title=GetTitle();
+
+ cout << " *" << ClassName() << "::Data* Id :" << GetUniqueID();
+ if (strlen(name)) cout << " Name : " << name;
+ if (strlen(title)) cout << " Title : " << title;
+ cout << endl;
+ if (fDevice)
+ {
+ const char* devname=fDevice->GetName();
+ const char* devtitle=fDevice->GetTitle();
+ cout << " Owned by device : " << fDevice->ClassName();
+ if (strlen(devname)) cout << " Name : " << devname;
+ if (strlen(devtitle)) cout << " Title : " << devtitle;
+ cout << endl;
+ }
+ }
+
+ Int_t nvalues=GetNvalues();
+ Int_t nerrors=GetNerrors();
+ Int_t nlinkslots=0;
+ if (fLinks) nlinkslots=fLinks->GetMaxColumn();
+ Int_t ncalibs=GetNcalflags();
+ Int_t ncalfuncs=GetNcalfuncs();
+ Int_t ndecalfuncs=GetNdecalfuncs();
+
+ Int_t n=nvalues;
+ if (nerrors>n) n=nerrors;
+ if (nlinkslots>n) n=nlinkslots;
+ if (InheritsFrom("AliDevice"))
+ {
+ if (ncalibs>n) n=ncalibs;
+ if (ncalfuncs>n) n=ncalfuncs;
+ if (ndecalfuncs>n) n=ndecalfuncs;
+ }
+
+ TObject* obj=0;
+ Int_t nrefs=0;
+ TArrayI posarr;
+ Int_t pos;
+
+ if (j<=0)
+ {
+ for (Int_t i=1; i<=n; i++)
+ {
+ cout << " Slot : " << i;
+ if (i<=nvalues) cout << " Signal value : " << GetSignal(i);
+ if (i<=nerrors) cout << " error : " << GetSignalError(i);
+ AliAttrib::List(i);
+ cout << endl;
+ obj=0;
+ nrefs=GetIndices(obj,i,posarr);
+ for (Int_t k=0; k<nrefs; k++)
+ {
+ pos=posarr.At(k);
+ obj=GetLink(i,pos);
+ if (obj)
+ {
+ cout << " Link at position " << pos << " to : " << obj->ClassName();
+ if (obj->InheritsFrom("TNamed"))
+ {
+ const char* lname=obj->GetName();
+ const char* ltitle=obj->GetTitle();
+ if (strlen(lname)) cout << " Name : " << lname;
+ if (strlen(ltitle)) cout << " Title : " << ltitle;
+ }
+ cout << endl;
+ }
+ }
+ }
}
else
{
- cout << "*AliSignal::AddSignal* Index mismatch j : " << j
- << " size : " << size << endl;
+ if (j<=n)
+ {
+ cout << " Slot : " << j;
+ if (j<=nvalues) cout << " Signal value : " << GetSignal(j);
+ if (j<=nerrors) cout << " error : " << GetSignalError(j);
+ AliAttrib::List(j);
+ cout << endl;
+ obj=0;
+ nrefs=GetIndices(obj,j,posarr);
+ for (Int_t kj=0; kj<nrefs; kj++)
+ {
+ pos=posarr.At(kj);
+ obj=GetLink(j,pos);
+ if (obj)
+ {
+ cout << " Link at position " << pos << " to : " << obj->ClassName();
+ if (obj->InheritsFrom("TNamed"))
+ {
+ const char* lnamej=obj->GetName();
+ const char* ltitlej=obj->GetTitle();
+ if (strlen(lnamej)) cout << " Name : " << lnamej;
+ if (strlen(ltitlej)) cout << " Title : " << ltitlej;
+ }
+ cout << endl;
+ }
+ }
+ }
}
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::List(TString name) const
+{
+// Provide signal information for the name-specified slot.
+//
+// This procedure involves a slot-index search based on the specified name
+// at each invokation. This may become slow in case many slots have been
+// defined and/or when this procedure is invoked many times.
+// In such cases it is preferable to use indexed addressing in the user code
+// either directly or via a few invokations of GetSlotIndex().
+
+ Int_t j=GetSlotIndex(name);
+ if (j>0) List(j);
}
///////////////////////////////////////////////////////////////////////////
-Float_t AliSignal::GetSignal(Int_t j)
+void AliSignal::ListWaveform(Int_t j) const
{
-// Provide j-th (default j=1) signal value.
-// Note : The first signal value is at j=1.
- if (fSignal)
+// Provide information for the j-th waveform.
+// The first waveform is at j=1.
+// In case j=0 (default) the info of all waveforms will be listed.
+// In case j=-1 the info of all waveforms will be listed, but the header
+// information will be suppressed.
+
+ if (j<-1)
{
- return fSignal->At(j-1);
+ cout << " *AliSignal::ListWaveform* Invalid argument j = " << j << endl;
+ return;
+ }
+
+ if (j != -1)
+ {
+ const char* name=GetName();
+ const char* title=GetTitle();
+
+ cout << " *" << ClassName() << "::Data* Id :" << GetUniqueID();
+ if (strlen(name)) cout << " Name : " << name;
+ if (strlen(title)) cout << " Title : " << title;
+ cout << endl;
+ if (fDevice)
+ {
+ const char* devname=fDevice->GetName();
+ const char* devtitle=fDevice->GetTitle();
+ cout << " Owned by device : " << fDevice->ClassName();
+ if (strlen(devname)) cout << " Name : " << devname;
+ if (strlen(devtitle)) cout << " Title : " << devtitle;
+ cout << endl;
+ }
+ }
+
+ Int_t n=GetNwaveforms();
+ TObject* obj=0;
+
+ if (j<=0)
+ {
+ for (Int_t i=1; i<=n; i++)
+ {
+ obj=GetWaveform(i);
+ if (obj)
+ {
+ const char* wfname=obj->GetName();
+ const char* wftitle=obj->GetTitle();
+ cout << " Waveform " << i << " : " << obj->ClassName();
+ if (strlen(wfname)) cout << " Name : " << wfname;
+ if (strlen(wftitle)) cout << " Title : " << wftitle;
+ cout << endl;
+ }
+ }
}
else
{
- return 0;
+ if (j<=n)
+ {
+ obj=GetWaveform(j);
+ if (obj)
+ {
+ const char* wfnamej=obj->GetName();
+ const char* wftitlej=obj->GetTitle();
+ cout << " Waveform " << j << " : " << obj->ClassName();
+ if (strlen(wfnamej)) cout << " Name : " << wfnamej;
+ if (strlen(wftitlej)) cout << " Title : " << wftitlej;
+ cout << endl;
+ }
+ }
}
}
///////////////////////////////////////////////////////////////////////////
-void AliSignal::SetSignalError(Double_t dsig,Int_t j)
+Int_t AliSignal::GetNvalues() const
+{
+// Provide the number of values for this signal.
+ Int_t n=0;
+ if (fSignals) n=fSignals->GetSize();
+ return n;
+}
+///////////////////////////////////////////////////////////////////////////
+Int_t AliSignal::GetNerrors() const
+{
+// Provide the number specified errors on the values for this signal.
+ Int_t n=0;
+ if (fDsignals) n=fDsignals->GetSize();
+ return n;
+}
+///////////////////////////////////////////////////////////////////////////
+Int_t AliSignal::GetNwaveforms() const
{
-// Store error on j-th (default j=1) signal value.
-// Note : The error on the first signal value is at j=1.
+// Provide the number of specified waveforms for this signal.
+// Actually the return value is the highest index of the stored waveforms.
+// This allows an index dependent meaning of waveform info (e.g. waveforms
+// with various gain values).
+// So, when all waveforms are stored in consequetive positions (e.g. 1,2,3),
+// this memberfunction returns 3, being both the highest filled position
+// and the actual number of waveforms.
+// In case only waveforms are stored at positions 1,2,5,7 this memberfunction
+// returns a value 7 whereas only 4 actual waveforms are present.
+// This implies that when looping over the various waveform slots, one
+// always has to check whether the returned pointer value is non-zero
+// (which is a good practice anyhow).
+ Int_t n=-1;
+ if (fWaveforms) n=fWaveforms->GetLast();
+ return (n+1);
+}
+///////////////////////////////////////////////////////////////////////////
+TH1F* AliSignal::GetWaveform(Int_t j) const
+{
+// Provide pointer to the j-th waveform histogram.
+ TH1F* waveform=0;
+ if (j <= GetNwaveforms()) waveform=(TH1F*)fWaveforms->At(j-1);
+ return waveform;
+}
+///////////////////////////////////////////////////////////////////////////
+TH1F* AliSignal::GetWaveform(TString name) const
+{
+// Provide pointer to the waveform histogram with the specified name.
+// In case no match is found, zero is returned.
+ Int_t n=GetNwaveforms();
+ TString str;
+ for (Int_t i=1; i<=n; i++)
+ {
+ TH1F* waveform=GetWaveform(i);
+ if (waveform)
+ {
+ str=waveform->GetName();
+ if (str == name) return waveform;
+ }
+ }
+ return 0; // No match found
+}
+///////////////////////////////////////////////////////////////////////////
+Int_t AliSignal::GetWaveformIndex(TString name) const
+{
+// Provide index to the waveform histogram with the specified name.
+// In case no match is found, zero is returned.
+ Int_t n=GetNwaveforms();
+ TString str;
+ for (Int_t i=1; i<=n; i++)
+ {
+ TH1F* waveform=GetWaveform(i);
+ if (waveform)
+ {
+ str=waveform->GetName();
+ if (str == name) return i;
+ }
+ }
+ return 0; // No match found
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::SetWaveform(TH1F* waveform,Int_t j)
+{
+// Set the 1D waveform histogram for the j-th waveform.
+//
+// Notes :
+// The first waveform position at j=1.
+// j=1 is the default value.
+//
+// In case the value of the index j exceeds the maximum number of reserved
+// positions for the waveforms, the number of reserved positions for the waveforms
+// is increased automatically.
+//
+// In case the histo pointer argument has the same value as the current waveform
+// histogram pointer value, no action is taken since the user has already
+// modified the actual histogram.
+//
+// In case the histo pointer argument is zero, the current waveform histogram
+// is deleted and the pointer set to zero.
+//
+// In all other cases the current waveform histogram is deleted and a new
+// copy of the input histogram is created which becomes the current waveform
+// histogram.
+
+ if (j<1) return;
+
+ if (!fWaveforms)
+ {
+ fWaveforms=new TObjArray(j);
+ fWaveforms->SetOwner();
+ }
+
+ if (j > fWaveforms->GetSize()) fWaveforms->Expand(j);
+
+ TH1F* hcur=(TH1F*)fWaveforms->At(j-1);
+ if (waveform != hcur)
+ {
+ if (hcur)
+ {
+ fWaveforms->Remove(hcur);
+ delete hcur;
+ hcur=0;
+ }
+ if (waveform)
+ {
+ hcur=new TH1F(*waveform);
+ fWaveforms->AddAt(hcur,j-1);
+ }
+ }
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::ResetWaveform(Int_t j)
+{
+// Reset the histogram of the j-th (default j=1) waveform.
+// This memberfunction invokes TH1F::Reset() for the corresponding waveform(s).
+// To actually delete the histograms from memory, use DeleteWaveform().
+// Notes : The first position is at j=1.
+// j=0 ==> All waveforms will be reset.
+
+ if (!fWaveforms) return;
- if (!fDsignal) ResetSignals();
+ Int_t size=fWaveforms->GetSize();
- Int_t size=fDsignal->GetSize();
- if (j<=size)
+ if ((j>=0) && (j<=size))
{
- fDsignal->AddAt(float(dsig),j-1);
+ if (j)
+ {
+ TH1F* hwave=(TH1F*)fWaveforms->At(j-1);
+ if (hwave) hwave->Reset();
+ }
+ else
+ {
+ for (Int_t i=0; i<size; i++)
+ {
+ TH1F* hwave=(TH1F*)fWaveforms->At(i);
+ if (hwave) hwave->Reset();
+ }
+ }
}
else
{
- cout << "*AliSignal::SetSignalError* Index mismatch j : " << j
- << " size : " << size << endl;
+ cout << " *AliSignal::ResetWaveform* Index j = " << j << " invalid." << endl;
+ return;
}
}
///////////////////////////////////////////////////////////////////////////
-Float_t AliSignal::GetSignalError(Int_t j)
+void AliSignal::ResetWaveform(TString name)
{
-// Provide error on the j-th (default j=1) signal value.
-// Note : The error on the first signal value is at j=1.
- if (fDsignal)
+// Reset the waveform with the specified name.
+ Int_t j=GetWaveformIndex(name);
+ if (j>0) ResetWaveform(j);
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::DeleteWaveform(Int_t j)
+{
+// Delete the histogram of the j-th (default j=1) waveform.
+// Notes : The first position is at j=1.
+// j=0 ==> All waveforms will be deleted.
+
+ if (!fWaveforms) return;
+
+ Int_t size=fWaveforms->GetSize();
+
+ if ((j>=0) && (j<=size))
{
- return fDsignal->At(j-1);
+ if (j)
+ {
+ TH1F* hwave=(TH1F*)fWaveforms->At(j-1);
+ if (hwave)
+ {
+ fWaveforms->Remove(hwave);
+ delete hwave;
+ }
+ }
+ else
+ {
+ delete fWaveforms;
+ fWaveforms=0;
+ }
}
else
{
+ cout << " *AliSignal::DeleteWaveform* Index j = " << j << " invalid." << endl;
+ return;
+ }
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::DeleteWaveform(TString name)
+{
+// Delete the waveform with the specified name.
+ Int_t j=GetWaveformIndex(name);
+ if (j>0) DeleteWaveform(j);
+}
+///////////////////////////////////////////////////////////////////////////
+Int_t AliSignal::GetNlinks(TObject* obj,Int_t j) const
+{
+// Provide the number of links to the specified object for the j-th slot.
+// If j=0 (default) all slots will be scanned for the specified object.
+// If obj=0 (default) all encountered objects for the specified slot will be counted.
+// So, invokation of the default GetNlinks() will return the total number of
+// all references to all sorts of stored objects.
+ if (j<0)
+ {
+ cout << " *AliSignal::GetNlinks* Index j = " << j << " invalid." << endl;
return 0;
}
+
+ Int_t n=0;
+ if (!j)
+ {
+ if (fLinks) n=fLinks->GetNrefs(obj);
+ }
+ else
+ {
+ TArrayI posarr;
+ n=GetIndices(obj,j,posarr);
+ }
+ return n;
}
///////////////////////////////////////////////////////////////////////////
-void AliSignal::Info(TString f)
+Int_t AliSignal::GetNlinks(TObject* obj,TString name) const
{
-// Provide signal information within the coordinate frame f
- cout << " *AliSignal::Info* " << endl;
- cout << " Position";
- Ali3Vector::Info(f);
-
- if (fSignal && fDsignal)
+// Provide the number of links to the specified object for the name-spec. slot.
+// If obj=0 all encountered objects for the specified slot will be counted.
+//
+// This procedure involves a slot-index search based on the specified name
+// at each invokation. This may become slow in case many slots have been
+// defined and/or when this procedure is invoked many times.
+// In such cases it is preferable to use indexed addressing in the user code
+// either directly or via a few invokations of GetSlotIndex().
+
+ Int_t j=GetSlotIndex(name);
+ Int_t n=0;
+ if (j>0) n=GetNlinks(obj,j);
+ return n;
+}
+///////////////////////////////////////////////////////////////////////////
+TObject* AliSignal::GetLink(Int_t j,Int_t k) const
+{
+// Provide pointer of the object linked to the j-th slot at position k.
+
+ TObject* obj=0;
+ // Note : In the internal storage matrix slots=columns positions=rows
+ if (fLinks) obj=fLinks->GetObject(k,j);
+ return obj;
+}
+///////////////////////////////////////////////////////////////////////////
+TObject* AliSignal::GetLink(TString name,Int_t k) const
+{
+// Provide pointer of the object linked to the name-spec. slot at position k.
+//
+// This procedure involves a slot-index search based on the specified name
+// at each invokation. This may become slow in case many slots have been
+// defined and/or when this procedure is invoked many times.
+// In such cases it is preferable to use indexed addressing in the user code
+// either directly or via a few invokations of GetSlotIndex().
+
+ Int_t j=GetSlotIndex(name);
+ TObject* obj=0;
+ if (j>0) obj=GetLink(j,k);
+ return obj;
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::SetLink(TObject* obj,Int_t j,Int_t k)
+{
+// Introduce a link (=pointer) to an object for the j-th slot at position k.
+// Only the pointer values are stored for (backward) reference, meaning
+// that the objects of which the pointers are stored are NOT owned
+// by the AliSignal object.
+//
+// Notes :
+// The first slot is at j=1 and the first position is at k=1.
+// j=1 and k=1 are the default values.
+//
+// If needed, the storage area for the links is increased automatically.
+//
+// In case the pointer argument is zero, indeed a value of zero will be
+// stored at the specified position (k) for the specified slot (j).
+//
+// In principle any object derived from TObject can be referred to by this
+// mechanism.
+// However, this "linking back" facility was introduced to enable AliSignal slots
+// to refer directly to the various AliTracks to which the AliSignal object itself
+// is related (see AliTrack::AddSignal).
+// Therefore, in case the input argument "obj" points to an AliTrack (or derived)
+// object, the current signal is automatically related to this AliTrack
+// (or derived) object.
+//
+// Please also have a look at the docs of the memberfunction ResetLink()
+// to prevent the situation of stored pointers to non-existent object.
+
+ if (!fLinks && obj) fLinks=new AliObjMatrix();
+
+ if (!fLinks) return;
+
+ // Note : In the internal storage matrix slots=columns positions=rows
+ fLinks->EnterObject(k,j,obj);
+ if (obj)
{
- for (Int_t i=0; i<fSignal->GetSize(); i++)
+ if (obj->InheritsFrom("AliTrack"))
{
- cout << " Signal value : " << fSignal->At(i)
- << " error : " << fDsignal->At(i) << endl;
+ AliTrack* t=(AliTrack*)obj;
+ t->AddSignal(*this);
}
}
-}
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::SetLink(TObject* obj,TString name,Int_t k)
+{
+// Introduce a link (=pointer) to an object for the name-spec. slot at position k.
+// Only the pointer values are stored for (backward) reference, meaning
+// that the objects of which the pointers are stored are NOT owned
+// by the AliSignal object.
+//
+// This procedure involves a slot-index search based on the specified name
+// at each invokation. This may become slow in case many slots have been
+// defined and/or when this procedure is invoked many times.
+// In such cases it is preferable to use indexed addressing in the user code
+// either directly or via a few invokations of GetSlotIndex().
+
+ Int_t j=GetSlotIndex(name);
+ if (j>0) SetLink(obj,j,k);
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::AddLink(TObject* obj,Int_t j)
+{
+// Introduce a link (=pointer) to an object for the j-th slot at the first
+// free position.
+// Only the pointer values are stored for (backward) reference, meaning
+// that the objects of which the pointers are stored are NOT owned
+// by the AliSignal object.
+//
+// Notes :
+// The first slot is at j=1 and the first position is at k=1.
+// j=1 is the default value.
+//
+// If needed, the storage area for the links is increased automatically.
+//
+// In case the pointer argument is zero, no link will be added.
+//
+// In principle any object derived from TObject can be referred to by this
+// mechanism.
+// However, this "linking back" facility was introduced to enable AliSignal slots
+// to refer directly to the various AliTracks to which the AliSignal object itself
+// is related (see AliTrack::AddSignal).
+// Therefore, in case the input argument "obj" points to an AliTrack (or derived)
+// object, the current signal is automatically related to this AliTrack
+// (or derived) object.
+//
+// Please also have a look at the docs of the memberfunction ResetLink()
+// to prevent the situation of stored pointers to non-existent object.
+
+ if (!obj || j<=0) return;
+
+ if (!fLinks) fLinks=new AliObjMatrix();
+
+ TObject* dum=0;
+ Int_t n=GetNlinks(dum,j);
+ Int_t pos=1;
+ for (Int_t k=1; k<=n; k++)
+ {
+ dum=GetLink(j,k);
+ if (!dum) break;
+ pos++;
+ }
+
+ SetLink(obj,j,pos);
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::AddLink(TObject* obj,TString name)
+{
+// Introduce a link (=pointer) to an object for the name-spec slot at the first
+// free position.
+// Only the pointer values are stored for (backward) reference, meaning
+// that the objects of which the pointers are stored are NOT owned
+// by the AliSignal object.
+//
+// This procedure involves a slot-index search based on the specified name
+// at each invokation. This may become slow in case many slots have been
+// defined and/or when this procedure is invoked many times.
+// In such cases it is preferable to use indexed addressing in the user code
+// either directly or via a few invokations of GetSlotIndex().
+
+ Int_t j=GetSlotIndex(name);
+ if (j>0) AddLink(obj,j);
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::ResetLink(Int_t j,Int_t k)
+{
+// Reset the link of the j-th slot at position k.
+//
+// Notes :
+// The first slot is at j=1 and the first position is at k=1.
+// j=1 and k=1 are the default values.
+//
+// This memberfunction is intended to reset only 1 specified link location.
+// For extended functionality, please refer to the memberfuction ResetLinks().
+//
+// In general the user should take care of properly clearing the corresponding
+// pointer here when the referred object is deleted.
+// However, this "linking back" facility was introduced to enable AliSignal slots
+// to refer directly to the various AliTracks to which the AliSignal object itself
+// is related (see AliTrack::AddSignal).
+// As such, the AliTrack destructor already takes care of clearing the corresponding
+// links from the various AliSignal slots for all the AliSignal objects that were
+// related to that AliTrack.
+// So, in case the link introduced via SetLink() is the pointer of an AliTrack object,
+// the user doesn't have to worry about clearing the corresponding AliTrack link from
+// the AliSignal object when the corresponding AliTrack object is deleted.
+
+ // Note : In the internal storage matrix slots=columns positions=rows
+ if (fLinks) fLinks->RemoveObject(k,j);
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::ResetLink(TString name,Int_t k)
+{
+// Reset the link of the name-specified slot at position k.
+//
+// This memberfunction is intended to reset only 1 specified link location.
+// For extended functionality, please refer to the memberfuction ResetLinks().
+//
+// This procedure involves a slot-index search based on the specified name
+// at each invokation. This may become slow in case many slots have been
+// defined and/or when this procedure is invoked many times.
+// In such cases it is preferable to use indexed addressing in the user code
+// either directly or via a few invokations of GetSlotIndex().
+
+ Int_t j=GetSlotIndex(name);
+ if (j>0) ResetLink(j,k);
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::ResetLinks(TObject* obj,Int_t j,Int_t k)
+{
+// Reset single or multiple link(s) according to user specified selections.
+//
+// A link is only reset if the stored reference matches the argument "obj".
+// In case obj=0 no check on the matching of the stored reference is performed
+// and the stored link is always reset in accordance with the other
+// selection criteria.
+//
+// In case the slot argument "j" is specified, only the links from that
+// specified slot will be deleted.
+// In case j=0 (default) no checking on the slot index is performed.
+//
+// In case the position argument "k" is specified, only the links from that
+// specified position will be deleted.
+// In case k=0 (default) no checking on the position index is performed.
+//
+// So, invokation of ResetLinks(obj) will remove all references to the
+// object "obj" from the total AliSignal, whereas ResetLinks(obj,j)
+// will remove all references to the object "obj" only from slot "j".
+//
+// Notes :
+// -------
+// The first slot is indicated as j=1, whereas the first position is at k=1.
+//
+// Invokation of ResetLinks(0,row,col) is equivalent to invoking the
+// memberfunction ResetLink(row,col).
+// Invoking the latter directly is slightly faster.
+//
+// Invokation of ResetLinks(0) will reset all stored references in this AliSignal.
+//
+// In general the user should take care of properly clearing the corresponding
+// pointer here when the referred object is deleted.
+// However, this "linking back" facility was introduced to enable AliSignal slots
+// to refer directly to the various AliTracks to which the AliSignal object itself
+// is related (see AliTrack::AddSignal).
+// As such, the AliTrack destructor already takes care of clearing the corresponding
+// links from the various AliSignal slots for all the AliSignal objects that were
+// related to that AliTrack.
+// So, in case the link introduced via SetLink() is the pointer of an AliTrack object,
+// the user doesn't have to worry about clearing the corresponding AliTrack link from
+// the AliSignal object when the corresponding AliTrack object is deleted.
+
+ if (!fLinks) return;
+
+ if (!obj && !j && !k)
+ {
+ fLinks->Reset();
+ }
+ else
+ {
+ // Note : In the internal storage matrix slots=columns positions=rows
+ fLinks->RemoveObjects(obj,k,j);
+ }
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::ResetLinks(TObject* obj,TString name,Int_t k)
+{
+// Reset single or multiple link(s) according to user specified selections.
+//
+// A link is only reset if the stored reference matches the argument "obj".
+// In case obj=0 no check on the matching of the stored reference is performed
+// and the stored link is always reset in accordance with the other
+// selection criteria.
+//
+// In case the position argument "k" is specified, only the links from that
+// specified position will be deleted.
+// In case k=0 (default) no checking on the position index is performed.
+//
+// This procedure involves a slot-index search based on the specified name
+// at each invokation. This may become slow in case many slots have been
+// defined and/or when this procedure is invoked many times.
+// In such cases it is preferable to use indexed addressing in the user code
+// either directly or via a few invokations of GetSlotIndex().
+
+ Int_t j=GetSlotIndex(name);
+ if (j>0) ResetLinks(obj,j,k);
+}
+///////////////////////////////////////////////////////////////////////////
+Int_t AliSignal::GetIndices(TObject* obj,TArrayI& js,TArrayI& ks) const
+{
+// Provide the slot and position indices of all the storage locations
+// of the specified object.
+// The slot (j) and pos. (k) indices are returned in the two separate TArrayI arrays
+// from which the (j,k) pairs can be obtained from the corresponding
+// array indices like (j,k)=(js.At(i),ks.At(i)).
+// The integer return argument represents the number of (j,k) pairs which
+// were encountered for the specified object.
+//
+// If obj=0 no object selection is performed and all (j,k) indices
+// of the stored references for all objects are returned.
+//
+// Notes :
+// -------
+// As usual the convention is that slot and position numbering starts at 1.
+//
+// This memberfunction always resets the two TArrayI arrays at the start.
+//
+// This memberfunction can only be used to obtain the (j,k) indices
+// of the object as stored via the SetLink() or AddLink() memberfunction.
+// This means that in case the user has entered a TObjArray as object
+// (to increase the dimension of the resulting structure), the (j,k)
+// indices of that TObjArray are obtained and NOT the indices of the
+// actual objects contained in that TObjArray structure.
+//
+ Int_t nrefs=0;
+ js.Reset();
+ ks.Reset();
+ // Note : In the internal storage matrix slots=columns positions=rows
+ if (fLinks) nrefs=fLinks->GetIndices(obj,ks,js);
+ return nrefs;
+}
+///////////////////////////////////////////////////////////////////////////
+Int_t AliSignal::GetIndices(TObject* obj,Int_t j,TArrayI& ks) const
+{
+// Provide the position indices of all the storage locations of the
+// specified object in the j-th slot of this AliSignal.
+// The position indices are returned in the TArrayI array.
+// The integer return argument represents the number of storage locations which
+// were encountered for the specified object in the j-th slot.
+//
+// If obj=0 no object selection is performed and all position indices
+// of the stored references for all objects of the j-th slot are returned.
+//
+// If j=0 all slots will be scanned and all position indices matching the
+// object selection are returned.
+// Note that in this case multiple appearances of the same position index
+// will only be recorded once in the returned TArrayI array.
+//
+// Notes :
+// -------
+// As usual the convention is that slot and position numbering starts at 1.
+//
+// This memberfunction always resets the TArrayI array at the start.
+//
+// This memberfunction can only be used to obtain the position indices
+// of the object as stored via the SetLink() or AddLink() memberfunction.
+// This means that in case the user has entered a TObjArray as object
+// (to increase the dimension of the resulting structure), the position
+// indices of that TObjArray are obtained and NOT the indices of the
+// actual objects contained in that TObjArray structure.
+//
+ Int_t nrefs=0;
+ ks.Reset();
+ // Note : In the internal storage matrix slots=columns positions=rows
+ if (fLinks) nrefs=fLinks->GetIndices(obj,ks,j);
+ return nrefs;
+}
+///////////////////////////////////////////////////////////////////////////
+Int_t AliSignal::GetIndices(TObject* obj,TString name,TArrayI& ks) const
+{
+// Provide the position indices of all the storage locations of the
+// specified object in the name-specified slot of this AliSignal.
+// The position indices are returned in the TArrayI array.
+// The integer return argument represents the number of storage locations which
+// were encountered for the specified object in the j-th slot.
+//
+// If obj=0 no object selection is performed and all position indices
+// of the stored references for all objects of the j-th slot are returned.
+//
+// This procedure involves a slot-index search based on the specified name
+// at each invokation. This may become slow in case many slots have been
+// defined and/or when this procedure is invoked many times.
+// In such cases it is preferable to use indexed addressing in the user code
+// either directly or via a few invokations of GetSlotIndex().
+
+ Int_t j=GetSlotIndex(name);
+ Int_t n=0;
+ if (j>0) n=GetIndices(obj,j,ks);
+ return n;
+}
+///////////////////////////////////////////////////////////////////////////
+Int_t AliSignal::GetIndices(TObject* obj,TArrayI& js,Int_t k) const
+{
+// Provide the slot indices of all the storage locations of the
+// specified object for the k-th position in this AliSignal.
+// The slot indices are returned in the TArrayI array.
+// The integer return argument represents the number of storage locations which
+// were encountered for the specified object in the k-th position.
+//
+// If obj=0 no object selection is performed and all slot indices
+// of the stored references for all objects in the k-th position are returned.
+//
+// If k=0 all positions will be scanned and all slot indices matching the
+// object selection are returned.
+// Note that in this case multiple appearances of the same slot index
+// will only be recorded once in the returned TArrayI array.
+//
+// Notes :
+// -------
+// As usual the convention is that slot and position numbering starts at 1.
+//
+// This memberfunction always resets the TArrayI array at the start.
+//
+// This memberfunction can only be used to obtain the slot indices
+// of the object as stored via the SetLink() or AddLink() memberfunction.
+// This means that in case the user has entered a TObjArray as object
+// (to increase the dimension of the resulting structure), the slot
+// indices of that TObjArray are obtained and NOT the indices of the
+// actual objects contained in that TObjArray structure.
+//
+ Int_t nrefs=0;
+ js.Reset();
+ // Note : In the internal storage matrix slots=columns positions=rows
+ if (fLinks) nrefs=fLinks->GetIndices(obj,k,js);
+ return nrefs;
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::SetSwapMode(Int_t swap)
+{
+// Set swapmode flag for the internal link storage.
+// In case for the stored links the maximum slot number differs considerably
+// from the maximum position number, it might be more efficient
+// (w.r.t. memory usage and/or output file size) to internally store the
+// link reference matrix with the rows and colums swapped.
+// This swapping is only related with the internal storage and as such
+// is completely hidden for the user.
+// At invokation of this memberfunction the default argument is swap=1.
+//
+// Note : The swap mode can only be set as long as no links are
+// stored in the AliSignal (i.e. a new instance of AliSignal
+// or after invokation of the Reset() or ResetLinks() function).
+
+ if (!fLinks) fLinks=new AliObjMatrix();
+ fLinks->SetSwapMode(swap);
+}
+///////////////////////////////////////////////////////////////////////////
+Int_t AliSignal::GetSwapMode() const
+{
+// Provide swapmode flag of the link storage.
+ Int_t swap=0;
+ if (fLinks) swap=fLinks->GetSwapMode();
+ return swap;
+}
+///////////////////////////////////////////////////////////////////////////
+void AliSignal::SetDevice(TObject* dev)
+{
+// Store the pointer to the device which owns this AliSignal object.
+// This memberfunction is meant for internal use in AliDevice.
+ fDevice=dev;
+}
+///////////////////////////////////////////////////////////////////////////
+AliDevice* AliSignal::GetDevice() const
+{
+// Provide the pointer to the device which owns this AliSignal object.
+ return (AliDevice*)fDevice;
+}
+///////////////////////////////////////////////////////////////////////////
+TObject* AliSignal::Clone(const char* name) const
+{
+// Make a deep copy of the current object and provide the pointer to the copy.
+// This memberfunction enables automatic creation of new objects of the
+// correct type depending on the object type, a feature which may be very useful
+// for containers when adding objects in case the container owns the objects.
+// This feature allows e.g. AliTrack to store either AliSignal objects or
+// objects derived from AliSignal via the AddSignal memberfunction, provided
+// these derived classes also have a proper Clone memberfunction.
+
+ AliSignal* sig=new AliSignal(*this);
+ if (name)
+ {
+ if (strlen(name)) sig->SetName(name);
+ }
+ return sig;
+}
///////////////////////////////////////////////////////////////////////////
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff