+/**************************************************************************
+ * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
+ * *
+ * Author: The ALICE Off-line Project. *
+ * Contributors are mentioned in the code where appropriate. *
+ * *
+ * Permission to use, copy, modify and distribute this software and its *
+ * documentation strictly for non-commercial purposes is hereby granted *
+ * without fee, provided that the above copyright notice appears in all *
+ * copies and that both the copyright notice and this permission notice *
+ * appear in the supporting documentation. The authors make no claims *
+ * about the suitability of this software for any purpose. It is *
+ * provided "as is" without express or implied warranty. *
+ **************************************************************************/
+
+/*
+$Log$
+Revision 1.17 2000/10/02 21:28:17 fca
+Removal of useless dependecies via forward declarations
+
+Revision 1.16 2000/05/10 16:52:18 vicinanz
+New TOF version with holes for PHOS/RICH
+
+Revision 1.14.2.1 2000/05/10 09:37:16 vicinanz
+New version with Holes for PHOS/RICH
+
+Revision 1.14 1999/11/05 22:39:06 fca
+New hits structure
+
+Revision 1.13 1999/11/02 11:26:39 fca
+added stdlib.h for exit
+
+Revision 1.12 1999/11/01 20:41:57 fca
+Added protections against using the wrong version of FRAME
+
+Revision 1.11 1999/10/22 08:04:14 fca
+Correct improper use of negative parameters
+
+Revision 1.10 1999/10/16 19:30:06 fca
+Corrected Rotation Matrix and CVS log
+
+Revision 1.9 1999/10/15 15:35:20 fca
+New version for frame1099 with and without holes
+
+Revision 1.8 1999/09/29 09:24:33 fca
+Introduction of the Copyright and cvs Log
+
+*/
+
///////////////////////////////////////////////////////////////////////////////
// //
-// Time Of Flight //
-// This class contains the functions for version 2 of the Time Of Flight //
+// Time Of Flight: design of C.Williams
+//
+// This class contains the functions for version 1 of the Time Of Flight //
// detector. //
-// //
+//
+// VERSION WITH 5 MODULES AND TILTED STRIPS
+//
+// HOLES FOR PHOS AND RICH DETECTOR
+//
+// Authors:
+//
+// Alessio Seganti
+// Domenico Vicinanza
+//
+// University of Salerno - Italy
+//
+//
//Begin_Html
/*
-<img src="picts/AliTOFv3Class.gif">
+<img src="picts/AliTOFv2Class.gif">
*/
//End_Html
// //
///////////////////////////////////////////////////////////////////////////////
+#include <iostream.h>
+#include <stdlib.h>
+
#include "AliTOFv2.h"
+#include "TBRIK.h"
+#include "TGeometry.h"
+#include "TNode.h"
+#include <TLorentzVector.h>
+#include "TObject.h"
#include "AliRun.h"
+#include "AliMC.h"
+#include "AliMagF.h"
#include "AliConst.h"
+
ClassImp(AliTOFv2)
//_____________________________________________________________________________
AliTOFv2::AliTOFv2(const char *name, const char *title)
- : AliTOF(name,title)
+ : AliTOF(name,title)
{
//
// Standard constructor
//
+ //
+ // Check that FRAME is there otherwise we have no place where to
+ // put TOF
+ AliModule* FRAME=gAlice->GetModule("FRAME");
+ if(!FRAME) {
+ Error("Ctor","TOF needs FRAME to be present\n");
+ exit(1);
+ } else
+ if(FRAME->IsVersion()!=1) {
+ Error("Ctor","FRAME version 1 needed with this version of TOF\n");
+ exit(1);
+ }
+
}
+
+//_____________________________________________________________________________
+void AliTOFv2::BuildGeometry()
+{
+ //
+ // Build TOF ROOT geometry for the ALICE event display
+ //
+ TNode *Node, *Top;
+ const int kColorTOF = 27;
+
+ // Find top TNODE
+ Top = gAlice->GetGeometry()->GetNode("alice");
+
+ // Position the different copies
+ const Float_t rTof =(fRmax+fRmin)/2;
+ const Float_t hTof = fRmax-fRmin;
+ const Int_t fNTof = 18;
+ const Float_t kPi = TMath::Pi();
+ const Float_t angle = 2*kPi/fNTof;
+ Float_t ang;
+
+ // Define TOF basic volume
+
+ char NodeName0[6], NodeName1[6], NodeName2[6];
+ char NodeName3[6], NodeName4[6], RotMatNum[6];
+
+ new TBRIK("S_TOF_C","TOF box","void",
+ 120*0.5,hTof*0.5,fZlenC*0.5);
+ new TBRIK("S_TOF_B","TOF box","void",
+ 120*0.5,hTof*0.5,fZlenB*0.5);
+ new TBRIK("S_TOF_A","TOF box","void",
+ 120*0.5,hTof*0.5,fZlenA*0.5);
+
+ for (Int_t NodeNum=1;NodeNum<19;NodeNum++){
+
+ if (NodeNum<10) {
+ sprintf(RotMatNum,"rot50%i",NodeNum);
+ sprintf(NodeName0,"FTO00%i",NodeNum);
+ sprintf(NodeName1,"FTO10%i",NodeNum);
+ sprintf(NodeName2,"FTO20%i",NodeNum);
+ sprintf(NodeName3,"FTO30%i",NodeNum);
+ sprintf(NodeName4,"FTO40%i",NodeNum);
+ }
+ if (NodeNum>9) {
+ sprintf(RotMatNum,"rot5%i",NodeNum);
+ sprintf(NodeName0,"FTO0%i",NodeNum);
+ sprintf(NodeName1,"FTO1%i",NodeNum);
+ sprintf(NodeName2,"FTO2%i",NodeNum);
+ sprintf(NodeName3,"FTO3%i",NodeNum);
+ sprintf(NodeName4,"FTO4%i",NodeNum);
+ }
+
+ new TRotMatrix(RotMatNum,RotMatNum,90,-20*NodeNum,90,90-20*NodeNum,0,0);
+ ang = (4.5-NodeNum) * angle;
+
+ Top->cd();
+ Node = new TNode(NodeName0,NodeName0,"S_TOF_C",rTof*TMath::Cos(ang),rTof*TMath::Sin(ang),299.15,RotMatNum);
+ Node->SetLineColor(kColorTOF);
+ fNodes->Add(Node);
+
+ Top->cd();
+ Node = new TNode(NodeName1,NodeName1,"S_TOF_C",rTof*TMath::Cos(ang),rTof*TMath::Sin(ang),-299.15,RotMatNum);
+ Node->SetLineColor(kColorTOF);
+ fNodes->Add(Node);
+if (NodeNum !=1 && NodeNum!=2 && NodeNum !=18)
+ {
+ Top->cd();
+ Node = new TNode(NodeName2,NodeName2,"S_TOF_B",rTof*TMath::Cos(ang),rTof*TMath::Sin(ang),146.45,RotMatNum);
+ Node->SetLineColor(kColorTOF);
+ fNodes->Add(Node);
+
+ Top->cd();
+ Node = new TNode(NodeName3,NodeName3,"S_TOF_B",rTof*TMath::Cos(ang),rTof*TMath::Sin(ang),-146.45,RotMatNum);
+ Node->SetLineColor(kColorTOF);
+ fNodes->Add(Node);
+ } // Holes for RICH detector
+
+if ((NodeNum<8 || NodeNum>12) && NodeNum !=1 && NodeNum!=2 && NodeNum
+!=18)
+ {
+ Top->cd();
+ Node = new TNode(NodeName4,NodeName4,"S_TOF_A",rTof*TMath::Cos(ang),rTof*TMath::Sin(ang),0.,RotMatNum);
+ Node->SetLineColor(kColorTOF);
+ fNodes->Add(Node);
+ } // Holes for PHOS detector (+ Holes for RICH detector, central part)
+ }
+}
+
+
//_____________________________________________________________________________
void AliTOFv2::CreateGeometry()
{
//
- // Create geometry for Time Of Flight version 2
+ // Create geometry for Time Of Flight version 0
//
//Begin_Html
/*
- <img src="picts/AliTOFv3.gif">
+ <img src="picts/AliTOFv2.gif">
*/
//End_Html
//
-
- //
- // Create common geometry between version 2 and 3
+ // Creates common geometry
//
AliTOF::CreateGeometry();
}
//_____________________________________________________________________________
-void AliTOFv2::TOFpc(Float_t xm, Float_t ym, Float_t zm0,
- Float_t zm1, Float_t zm2)
+void AliTOFv2::TOFpc(Float_t xtof, Float_t ytof, Float_t zlenC,
+ Float_t zlenB, Float_t zlenA, Float_t ztof0)
{
//
// Definition of the Time Of Fligh Resistive Plate Chambers
- //
+ // xFLT, yFLT, zFLT - sizes of TOF modules (large)
+
+ Float_t ycoor, zcoor;
+ Float_t par[10];
+ Int_t *idtmed = fIdtmed->GetArray()-499;
+ Int_t idrotm[100];
+ Int_t nrot = 0;
+ Float_t hTof = fRmax-fRmin;
+
+ Float_t Radius = fRmin+2.;//cm
+
+ par[0] = xtof * 0.5;
+ par[1] = ytof * 0.5;
+ par[2] = zlenC * 0.5;
+ gMC->Gsvolu("FTOC", "BOX ", idtmed[506], par, 3);
+ par[2] = zlenB * 0.5;
+ gMC->Gsvolu("FTOB", "BOX ", idtmed[506], par, 3);
+ par[2] = zlenA * 0.5;
+ gMC->Gsvolu("FTOA", "BOX ", idtmed[506], par, 3);
+
+
+// Positioning of modules
+
+ Float_t zcor1 = ztof0 - zlenC*0.5;
+ Float_t zcor2 = ztof0 - zlenC - zlenB*0.5;
+ Float_t zcor3 = 0.;
+
+ AliMatrix(idrotm[0], 90., 0., 0., 0., 90,-90.);
+ AliMatrix(idrotm[1], 90.,180., 0., 0., 90, 90.);
+ gMC->Gspos("FTOC", 1, "BTO1", 0, zcor1, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOC", 2, "BTO1", 0, -zcor1, 0, idrotm[1], "ONLY");
+ gMC->Gspos("FTOC", 1, "BTO2", 0, zcor1, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOC", 2, "BTO2", 0, -zcor1, 0, idrotm[1], "ONLY");
+ gMC->Gspos("FTOC", 1, "BTO3", 0, zcor1, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOC", 2, "BTO3", 0, -zcor1, 0, idrotm[1], "ONLY");
+
+ gMC->Gspos("FTOB", 1, "BTO1", 0, zcor2, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOB", 2, "BTO1", 0, -zcor2, 0, idrotm[1], "ONLY");
+ gMC->Gspos("FTOB", 1, "BTO2", 0, zcor2, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOB", 2, "BTO2", 0, -zcor2, 0, idrotm[1], "ONLY");
+
+ gMC->Gspos("FTOA", 0, "BTO1", 0, zcor3, 0, idrotm[0], "ONLY");
+
+ Float_t db = 0.5;//cm
+ Float_t xFLT, xFST, yFLT, zFLTA, zFLTB, zFLTC;
+
+ xFLT = fStripLn;
+ yFLT = ytof;
+ zFLTA = zlenA;
+ zFLTB = zlenB;
+ zFLTC = zlenC;
- AliMC* pMC = AliMC::GetMC();
+ xFST = xFLT-fDeadBndX*2;//cm
+
+// Sizes of MRPC pads
+
+ Float_t yPad = 0.505;//cm
- Int_t inum;
- Float_t xcor, zcor, ytop, ycoor;
- Float_t zazor, dx, dy, dz, xp, yp, zp, ywidth;
- Int_t ink;
- Float_t par[10];
- Int_t inz, nxp, npx, npz;
- Float_t xsz, ysz, zsz;
- Int_t nzp0, nzp1, nzp2;
+// Large not sensitive volumes with CO2
+ par[0] = xFLT*0.5;
+ par[1] = yFLT*0.5;
+
+ cout <<"************************* TOF geometry **************************"<<endl;
+
+ par[2] = (zFLTA *0.5);
+ gMC->Gsvolu("FLTA", "BOX ", idtmed[506], par, 3); // CO2
+ gMC->Gspos ("FLTA", 0, "FTOA", 0., 0., 0., 0, "ONLY");
+
+ par[2] = (zFLTB * 0.5);
+ gMC->Gsvolu("FLTB", "BOX ", idtmed[506], par, 3); // CO2
+ gMC->Gspos ("FLTB", 0, "FTOB", 0., 0., 0., 0, "ONLY");
+
+ par[2] = (zFLTC * 0.5);
+ gMC->Gsvolu("FLTC", "BOX ", idtmed[506], par, 3); // CO2
+ gMC->Gspos ("FLTC", 0, "FTOC", 0., 0., 0., 0, "ONLY");
+
+////////// Layers before detector ////////////////////
+
+// MYlar layer in front 1.0 mm thick at the beginning
+ par[0] = -1;
+ par[1] = 0.1;//cm
+ par[2] = -1;
+ ycoor = -yFLT/2 + par[1];
+ gMC->Gsvolu("FMYA", "BOX ", idtmed[508], par, 3); // Alluminium
+ gMC->Gspos ("FMYA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FMYB", "BOX ", idtmed[508], par, 3); // Alluminium
+ gMC->Gspos ("FMYB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FMYC", "BOX ", idtmed[508], par, 3); // Alluminium
+ gMC->Gspos ("FMYC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
+
+// honeycomb (special Polyethilene Layer of 1cm)
+ ycoor = ycoor + par[1];
+ par[0] = -1;
+ par[1] = 0.5;//cm
+ par[2] = -1;
+ ycoor = ycoor + par[1];
+ gMC->Gsvolu("FPLA", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FPLA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FPLB", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FPLB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FPLC", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FPLC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
+
+///////////////// Detector itself //////////////////////
+
+ const Float_t DeadBound = fDeadBndZ; //cm non-sensitive between the pad edge
+ //and the boundary of the strip
+ const Int_t nx = fNpadX; // number of pads along x
+ const Int_t nz = fNpadZ; // number of pads along z
+ const Float_t Space = fSpace; //cm distance from the front plate of the box
+
+ Float_t zSenStrip = fZpad*fNpadZ;//cm
+ Float_t StripWidth = zSenStrip + 2*DeadBound;
+
+ par[0] = xFLT*0.5;
+ par[1] = yPad*0.5;
+ par[2] = StripWidth*0.5;
- Int_t *idtmed = gAlice->Idtmed();
+ // glass layer of detector STRip
+ gMC->Gsvolu("FSTR","BOX",idtmed[514],par,3);
+
+ // Non-Sesitive Freon boundaries
+ par[0] = xFLT*0.5;
+ par[1] = 0.110*0.5;//cm
+ par[2] = -1;
+ gMC->Gsvolu("FNSF","BOX",idtmed[512],par,3);
+ gMC->Gspos ("FNSF",0,"FSTR",0.,0.,0.,0,"ONLY");
+
+ // MYlar for Internal non-sesitive boundaries
+// par[1] = 0.025;//cm
+// gMC->Gsvolu("FMYI","BOX",idtmed[510],par,3);
+// gMC->Gspos ("FMYI",0,"FNSF",0.,0.,0.,0,"MANY");
+
+ // MYlar eXternal layers
+ par[1] = 0.035*0.5;//cm
+ ycoor = -yPad*0.5+par[1];
+ gMC->Gsvolu("FMYX","BOX",idtmed[510],par,3);
+ gMC->Gspos ("FMYX",1,"FSTR",0.,ycoor,0.,0,"ONLY");
+ gMC->Gspos ("FMYX",2,"FSTR",0.,-ycoor,0.,0,"ONLY");
+ ycoor += par[1];
+
+ // GRaphyte Layers
+ par[1] = 0.003*0.5;
+ ycoor += par[1];
+ gMC->Gsvolu("FGRL","BOX",idtmed[502],par,3);
+ gMC->Gspos ("FGRL",1,"FSTR",0.,ycoor,0.,0,"ONLY");
+ gMC->Gspos ("FGRL",2,"FSTR",0.,-ycoor,0.,0,"ONLY");
+
+ // freon sensitive layer (Chlorine-Fluorine-Carbon)
+ par[0] = xFST*0.5;
+ par[1] = 0.110*0.5;
+ par[2] = zSenStrip*0.5;
+ gMC->Gsvolu("FCFC","BOX",idtmed[513],par,3);
+ gMC->Gspos ("FCFC",0,"FNSF",0.,0.,0.,0,"ONLY");
- // X size of PPC plate
- xsz = 60.;
- // Y size of PPC plate
- ysz = .2;
- // Z size of PPC plate
- zsz = 50.;
- // Width of DME box
- ywidth = 4.;
- // Frame width along X,Y and Z axis of RPC chambers
- dx = 0.;
- dy = .2;
- // + 0.1cm (Zagreev)
- dz = 0.;
- // gap in RPC chamber
- zazor = .03;
- // X size of RPC chamber
- // XP=3.06 ! + 0.06cm (Zagreev)
- xp = 3.9;
- // Y size of RPC chamber
- yp = zazor + dy * 2;
- // YP=0.32
- // Z size of RPC chamber
- // ZP=3.06 ! + 0.06cm (Zagreev)
- // (Zagreev)
- zp = 4.1;
- // No sensitive volumes with DME
- par[0] = xm / 2.;
- par[1] = ywidth / 2.;
- par[2] = zm0 / 2.;
- ycoor = ym / 3. - ywidth / 2.;
- pMC->Gsvolu("FBT1", "BOX ", idtmed[505], par, 3);
- pMC->Gspos("FBT1", 0, "FTO1", 0., 0., 0., 0, "ONLY");
- par[2] = zm1 / 2.;
- pMC->Gsvolu("FBT2", "BOX ", idtmed[505], par, 3);
- pMC->Gspos("FBT2", 1, "FTO2", 0., 0., 0., 0, "ONLY");
- par[2] = zm2 / 2.;
- pMC->Gsvolu("FBT3", "BOX ", idtmed[505], par, 3);
- pMC->Gspos("FBT3", 2, "FTO3", 0., 0., 0., 0, "ONLY");
- // Electronic plate
- par[1] = ysz / 2.;
- par[2] = zm0 / 2.;
- ycoor = ywidth / 2. - ysz / 2.;
- pMC->Gsvolu("FPE1", "BOX ", idtmed[504], par, 3);
- pMC->Gspos("FPE1", 0, "FBT1", 0., ycoor, 0., 0, "ONLY");
- pMC->Gspos("FPE1", 1, "FBT1", 0., -ycoor, 0., 0, "ONLY");
- par[2] = zm1 / 2.;
- pMC->Gsvolu("FPE2", "BOX ", idtmed[504], par, 3);
- pMC->Gspos("FPE2", 0, "FBT2", 0., ycoor, 0., 0, "ONLY");
- pMC->Gspos("FPE2", 1, "FBT2", 0., -ycoor, 0., 0, "ONLY");
- par[2] = zm2 / 2.;
- pMC->Gsvolu("FPE3", "BOX ", idtmed[504], par, 3);
- pMC->Gspos("FPE3", 0, "FBT3", 0., ycoor, 0., 0, "ONLY");
- pMC->Gspos("FPE3", 1, "FBT3", 0., -ycoor, 0., 0, "ONLY");
- // Electronic insensitive volumes
- par[1] = yp / 2.;
- par[2] = zm0 / 2.;
- ytop = ywidth / 2. - (ysz * 2 + yp) / 2.;
- pMC->Gsvolu("FLT1", "BOX ", idtmed[505], par, 3);
- pMC->Gspos("FLT1", 0, "FBT1", 0., -ytop, 0., 0, "ONLY");
- par[2] = zm1 / 2.;
- pMC->Gsvolu("FLT2", "BOX ", idtmed[505], par, 3);
- pMC->Gspos("FLT2", 0, "FBT2", 0., -ytop, 0., 0, "ONLY");
- par[2] = zm2 / 2.;
- pMC->Gsvolu("FLT3", "BOX ", idtmed[505], par, 3);
- pMC->Gspos("FLT3", 0, "FBT3", 0., -ytop, 0., 0, "ONLY");
- // PPC-plate number along X axis
- nxp = Int_t (xm / xsz);
- // PPC-plate number along Z axis
- nzp0 = Int_t (zm0 / zsz);
- nzp1 = Int_t (zm1 / zsz);
- nzp2 = Int_t (zm2 / zsz);
- // Position of PPC-plates
- par[0] = xm * .5 / nxp;
- par[2] = zm0 * .5 / nzp0;
- pMC->Gsvolu("FLK1", "BOX ", idtmed[505], par, 3);
- inum = 0;
- for (ink = 1; ink <= nxp; ++ink) {
- xcor = xm * .5 * ((ink * 2 - 1) / (Float_t) nxp -
- 1.);
- for (inz = 1; inz <= nzp0; ++inz) {
- zcor = zm0 * .5 * ((inz * 2 - 1) / (Float_t) nzp0 - 1.);
- ++inum;
- pMC->Gspos("FLK1", inum, "FLT1", xcor, 0., zcor, 0, "ONLY");
- }
- for (inz = 1; inz <= nzp1; ++inz) {
- zcor = zm1 * .5 * ((inz * 2 - 1) / (Float_t) nzp1 - 1.);
- ++inum;
- pMC->Gspos("FLK1", inum, "FLT2", xcor, 0., zcor, 0, "ONLY");
- }
- for (inz = 1; inz <= nzp2; ++inz) {
- zcor = zm2 * .5 * ((inz * 2 - 1) / (Float_t) nzp2 - 1.);
- ++inum;
- pMC->Gspos("FLK1", inum, "FLT3", xcor, 0., zcor, 0, "ONLY");
- }
- }
- // RPC position on RPC-plate
- npx = 15;
- // Zagreev
- npz = 12;
- // Zagreev
- par[0] = xsz * .5 / npx;
- par[2] = zsz * .5 / npz;
- pMC->Gsvolu("FLL1", "BOX ", idtmed[505], par, 3);
- inum = 0;
- for (ink = 1; ink <= npx; ++ink) {
- xcor = xsz * .5 * ((ink * 2 - 1) / (Float_t) npx - 1.);
- for (inz = 1; inz <= npz; ++inz) {
- zcor = zsz * .5 * ((inz * 2 - 1) / (Float_t) npz - 1.);
- ++inum;
- pMC->Gspos("FLL1", inum, "FLK1", xcor, 0., zcor, 0, "ONLY");
- }
- }
- // RPC geometry
- par[0] = xp / 2.;
- par[1] = yp / 2.;
- par[2] = zp / 2.;
- pMC->Gsvolu("FPG1", "BOX ", idtmed[507], par, 3);
- pMC->Gspos("FPG1", inum, "FLL1", 0., 0., 0., 0, "ONLY");
- par[0] = xp / 2. - dx;
- par[1] = yp / 2. - dy;
- par[2] = zp / 2. - dz;
- pMC->Gsvolu("FPG2", "BOX ", idtmed[509], par, 3);
- pMC->Gspos("FPG2", 0, "FPG1", 0., 0., 0., 0, "ONLY");
+ // Pad definition x & z
+ gMC->Gsdvn("FLZ","FCFC", nz, 3);
+ gMC->Gsdvn("FLX","FLZ" , nx, 1);
+
+ // MRPC PAD itself
+ par[0] = -1;
+ par[1] = -1;
+ par[2] = -1;
+ gMC->Gsvolu("FPAD", "BOX ", idtmed[513], par, 3);
+ gMC->Gspos ("FPAD", 0, "FLX", 0., 0., 0., 0, "ONLY");
+
+//// Positioning the Strips (FSTR) in the FLT volumes /////
+
+ // Plate A (Central)
+
+ Float_t t = zFLTC+zFLTB+zFLTA*0.5+ 2*db;//Half Width of Barrel
+
+ Float_t Gap = fGapA; //cm distance between the strip axis
+ Float_t zpos = 0;
+ Float_t ang = 0;
+ Int_t i=1,j=1;
+ nrot = 0;
+ zcoor = 0;
+ ycoor = -14.5 + Space ; //2 cm over front plate
+
+ AliMatrix (idrotm[0], 90., 0.,90.,90.,0., 90.);
+ gMC->Gspos("FSTR",j,"FLTA",0.,ycoor, 0.,idrotm[0],"ONLY");
+
+ printf("%f, St. %2i, Pl.3 ",ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+
+ zcoor -= zSenStrip;
+ j++;
+ Int_t UpDown = -1; // UpDown=-1 -> Upper strip
+ // UpDown=+1 -> Lower strip
+ do{
+ ang = atan(zcoor/Radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0.,90.-ang,90.,-ang, 90.);
+ AliMatrix (idrotm[nrot+1],90.,180.,90.+ang,90., ang, 90.);
+ ang /= kRaddeg;
+ ycoor = -14.5+ Space; //2 cm over front plate
+ ycoor += (1-(UpDown+1)/2)*Gap;
+ gMC->Gspos("FSTR",j ,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY");
+ gMC->Gspos("FSTR",j+1,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY");
+
+ printf("%f, St. %2i, Pl.3 ",ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+
+ j += 2;
+ UpDown*= -1; // Alternate strips
+ zcoor = zcoor-(zSenStrip/2)/TMath::Cos(ang)-
+ UpDown*Gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang);
+ } while (zcoor-(StripWidth/2)*TMath::Cos(ang)>-t+zFLTC+zFLTB+db*2);
+
+ zcoor = zcoor+(zSenStrip/2)/TMath::Cos(ang)+
+ UpDown*Gap*TMath::Tan(ang)+
+ (zSenStrip/2)/TMath::Cos(ang);
+
+ Gap = fGapB;
+ zcoor = zcoor-(zSenStrip/2)/TMath::Cos(ang)-
+ UpDown*Gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang);
+
+ ang = atan(zcoor/Radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0.,90.-ang,90.,-ang, 90.);
+ AliMatrix (idrotm[nrot+1],90.,180.,90.+ang,90., ang, 90.);
+ ang /= kRaddeg;
+
+ ycoor = -14.5+ Space; //2 cm over front plate
+ ycoor += (1-(UpDown+1)/2)*Gap;
+ gMC->Gspos("FSTR",j ,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY");
+ gMC->Gspos("FSTR",j+1,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY");
+
+ printf("%f, St. %2i, Pl.3 ",ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+
+ ycoor = -hTof/2.+ Space;//2 cm over front plate
+
+ // Plate B
+
+ nrot = 0;
+ i=1;
+ UpDown = 1;
+ Float_t DeadRegion = 1.0;//cm
+
+ zpos = zcoor - (zSenStrip/2)/TMath::Cos(ang)-
+ UpDown*Gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang)-
+ DeadRegion/TMath::Cos(ang);
+
+ ang = atan(zpos/Radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
+ ang /= kRaddeg;
+ ycoor = -hTof*0.5+ Space ; //2 cm over front plate
+ ycoor += (1-(UpDown+1)/2)*Gap;
+ zcoor = zpos+(zFLTA*0.5+zFLTB*0.5+db); // Moves to the system of the modulus FLTB
+ gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
+
+ printf("%f, St. %2i, Pl.4 ",ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+
+ i++;
+ UpDown*=-1;
+
+ do {
+ zpos = zpos - (zSenStrip/2)/TMath::Cos(ang)-
+ UpDown*Gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang);
+ ang = atan(zpos/Radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
+ ang /= kRaddeg;
+ ycoor = -hTof*0.5+ Space ; //2 cm over front plate
+ ycoor += (1-(UpDown+1)/2)*Gap;
+ zcoor = zpos+(zFLTA*0.5+zFLTB*0.5+db); // Moves to the system of the modulus FLTB
+ gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
+
+ printf("%f, St. %2i, Pl.4 ",ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+
+ UpDown*=-1;
+ i++;
+ } while (TMath::Abs(ang*kRaddeg)<22.5);
+ //till we reach a tilting angle of 22.5 degrees
+
+ ycoor = -hTof*0.5+ Space ; //2 cm over front plate
+ zpos = zpos - zSenStrip/TMath::Cos(ang);
+
+ do {
+ ang = atan(zpos/Radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
+ ang /= kRaddeg;
+ zcoor = zpos+(zFLTB/2+zFLTA/2+db);
+ gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
+ zpos = zpos - zSenStrip/TMath::Cos(ang);
+ printf("%f, St. %2i, Pl.4 ",ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ i++;
+
+ } while (zpos-StripWidth*0.5/TMath::Cos(ang)>-t+zFLTC+db);
+
+ // Plate C
+
+ zpos = zpos + zSenStrip/TMath::Cos(ang);
+
+ zpos = zpos - (zSenStrip/2)/TMath::Cos(ang)+
+ Gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang);
+
+ nrot = 0;
+ i=0;
+ ycoor= -hTof*0.5+Space+Gap;
+
+ do {
+ i++;
+ ang = atan(zpos/Radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
+ ang /= kRaddeg;
+ zcoor = zpos+(zFLTC*0.5+zFLTB+zFLTA*0.5+db*2);
+ gMC->Gspos("FSTR",i, "FLTC", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
+
+ printf("%f, St. %2i, Pl.5 ",ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+
+ zpos = zpos - zSenStrip/TMath::Cos(ang);
+ } while (zpos-StripWidth*TMath::Cos(ang)*0.5>-t);
+
+
+////////// Layers after detector /////////////////
+
+// honeycomb (Polyethilene) Layer after (3cm)
+
+ Float_t OverSpace = fOverSpc;//cm
+
+ par[0] = -1;
+ par[1] = 0.6;
+ par[2] = -1;
+ ycoor = -yFLT/2 + OverSpace + par[1];
+ gMC->Gsvolu("FPEA", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FPEA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FPEB", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FPEB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FPEC", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FPEC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
+
+// Electronics (Cu) after
+ ycoor += par[1];
+ par[0] = -1;
+ par[1] = 1.43*0.05*0.5; // 5% of X0
+ par[2] = -1;
+ ycoor += par[1];
+ gMC->Gsvolu("FECA", "BOX ", idtmed[501], par, 3); // Cu
+ gMC->Gspos ("FECA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FECB", "BOX ", idtmed[501], par, 3); // Cu
+ gMC->Gspos ("FECB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FECC", "BOX ", idtmed[501], par, 3); // Cu
+ gMC->Gspos ("FECC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
+
+// cooling WAter after
+ ycoor += par[1];
+ par[0] = -1;
+ par[1] = 36.1*0.02*0.5; // 2% of X0
+ par[2] = -1;
+ ycoor += par[1];
+ gMC->Gsvolu("FWAA", "BOX ", idtmed[515], par, 3); // Water
+ gMC->Gspos ("FWAA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FWAB", "BOX ", idtmed[515], par, 3); // Water
+ gMC->Gspos ("FWAB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FWAC", "BOX ", idtmed[515], par, 3); // Water
+ gMC->Gspos ("FWAC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
+
+//Back Plate honycomb (2cm)
+ par[0] = -1;
+ par[1] = 2 *0.5;
+ par[2] = -1;
+ ycoor = yFLT/2 - par[1];
+ gMC->Gsvolu("FBPA", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FBPA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FBPB", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FBPB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FBPC", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FBPC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
}
//_____________________________________________________________________________
void AliTOFv2::DrawModule()
{
//
- // Draw a shaded view of the Time Of Flight version 2
+ // Draw a shaded view of the Time Of Flight version 1
//
-
- AliMC* pMC = AliMC::GetMC();
-
// Set everything unseen
- pMC->Gsatt("*", "seen", -1);
+ gMC->Gsatt("*", "seen", -1);
//
// Set ALIC mother transparent
- pMC->Gsatt("ALIC","SEEN",0);
+ gMC->Gsatt("ALIC","SEEN",0);
//
// Set the volumes visible
- pMC->Gsatt("ALIC","SEEN",0);
- pMC->Gsatt("FBAR","SEEN",0);
- pMC->Gsatt("FTO1","SEEN",0);
- pMC->Gsatt("FTO2","SEEN",0);
- pMC->Gsatt("FTO3","SEEN",0);
- pMC->Gsatt("FBT1","SEEN",0);
- pMC->Gsatt("FBT2","SEEN",0);
- pMC->Gsatt("FBT3","SEEN",0);
- pMC->Gsatt("FLT1","SEEN",0);
- pMC->Gsatt("FLT2","SEEN",0);
- pMC->Gsatt("FLT3","SEEN",0);
- pMC->Gsatt("FLK1","SEEN",1);
- //
- pMC->Gdopt("hide", "on");
- pMC->Gdopt("shad", "on");
- pMC->Gsatt("*", "fill", 7);
- pMC->SetClipBox(".");
- pMC->SetClipBox("*", 0, 1000, -1000, 1000, -1000, 1000);
- pMC->DefaultRange();
- pMC->Gdraw("alic", 40, 30, 0, 12, 9.5, .02, .02);
- pMC->Gdhead(1111, "Time Of Flight");
- pMC->Gdman(18, 4, "MAN");
- pMC->Gdopt("hide","off");
+ gMC->Gsatt("ALIC","SEEN",0);
+
+ gMC->Gsatt("FTOA","SEEN",1);
+ gMC->Gsatt("FTOB","SEEN",1);
+ gMC->Gsatt("FTOC","SEEN",1);
+ gMC->Gsatt("FLTA","SEEN",1);
+ gMC->Gsatt("FLTB","SEEN",1);
+ gMC->Gsatt("FLTC","SEEN",1);
+ gMC->Gsatt("FPLA","SEEN",1);
+ gMC->Gsatt("FPLB","SEEN",1);
+ gMC->Gsatt("FPLC","SEEN",1);
+ gMC->Gsatt("FSTR","SEEN",1);
+ gMC->Gsatt("FPEA","SEEN",1);
+ gMC->Gsatt("FPEB","SEEN",1);
+ gMC->Gsatt("FPEC","SEEN",1);
+
+ gMC->Gsatt("FLZ1","SEEN",0);
+ gMC->Gsatt("FLZ2","SEEN",0);
+ gMC->Gsatt("FLZ3","SEEN",0);
+ gMC->Gsatt("FLX1","SEEN",0);
+ gMC->Gsatt("FLX2","SEEN",0);
+ gMC->Gsatt("FLX3","SEEN",0);
+ gMC->Gsatt("FPAD","SEEN",0);
+
+ gMC->Gdopt("hide", "on");
+ gMC->Gdopt("shad", "on");
+ gMC->Gsatt("*", "fill", 7);
+ gMC->SetClipBox(".");
+ gMC->SetClipBox("*", 0, 1000, -1000, 1000, -1000, 1000);
+ gMC->DefaultRange();
+ gMC->Gdraw("alic", 40, 30, 0, 12, 9.5, .02, .02);
+ gMC->Gdhead(1111, "Time Of Flight");
+ gMC->Gdman(18, 4, "MAN");
+ gMC->Gdopt("hide","off");
}
//_____________________________________________________________________________
//
// Initialise the detector after the geometry has been defined
//
+ printf("**************************************"
+ " TOF "
+ "**************************************\n");
+ printf("\n Version 2 of TOF initialing, "
+ "TOF with holes for PHOS and RICH \n");
- AliMC* pMC = AliMC::GetMC();
-
AliTOF::Init();
- fIdFTO2=pMC->VolId("FTO2");
- fIdFTO3=pMC->VolId("FTO3");
- fIdFLT1=pMC->VolId("FLT1");
- fIdFLT2=pMC->VolId("FLT2");
- fIdFLT3=pMC->VolId("FLT3");
+
+ fIdFTOA = gMC->VolId("FTOA");
+ fIdFTOB = gMC->VolId("FTOB");
+ fIdFTOC = gMC->VolId("FTOC");
+ fIdFLTA = gMC->VolId("FLTA");
+ fIdFLTB = gMC->VolId("FLTB");
+ fIdFLTC = gMC->VolId("FLTC");
+
+ printf("**************************************"
+ " TOF "
+ "**************************************\n");
}
//_____________________________________________________________________________
//
// Procedure called at each step in the Time Of Flight
//
- Float_t hits[8];
- Int_t vol[3];
- Int_t copy, id;
- AliMC *pMC= AliMC::GetMC();
- Int_t *idtmed = gAlice->Idtmed();
- if(pMC->GetMedium()==idtmed[510-1] &&
- pMC->TrackEntering() && pMC->TrackCharge()
- && pMC->CurrentVol(0,copy)==fIdSens) {
- TClonesArray &lhits = *fHits;
- //
- // Record only charged tracks at entrance
- pMC->CurrentVolOff(1,0,copy);
- vol[2]=copy;
- pMC->CurrentVolOff(3,0,copy);
- vol[1]=copy;
- id=pMC->CurrentVolOff(6,0,copy);
- vol[0]=copy;
- if(id==fIdFTO3) {
- vol[0]+=22;
- id=pMC->CurrentVolOff(4,0,copy);
- if(id==fIdFLT3) vol[1]+=6;
- } else if (id==fIdFTO2) {
- vol[0]+=20;
- id=pMC->CurrentVolOff(4,0,copy);
- if(id==fIdFLT2) vol[1]+=8;
- } else {
- id=pMC->CurrentVolOff(4,0,copy);
- if(id==fIdFLT1) vol[1]+=14;
+ TLorentzVector mom, pos;
+ Float_t xm[3],pm[3],xpad[3],ppad[3];
+ Float_t hits[13],phi,phid,z;
+ Int_t vol[5];
+ Int_t sector, plate, pad_x, pad_z, strip;
+ Int_t copy, pad_z_id, pad_x_id, strip_id, i;
+ Int_t *idtmed = fIdtmed->GetArray()-499;
+ Float_t IncidenceAngle;
+
+ if(gMC->GetMedium()==idtmed[513] &&
+ gMC->IsTrackEntering() && gMC->TrackCharge()
+ && gMC->CurrentVolID(copy)==fIdSens)
+ {
+ // getting information about hit volumes
+
+ pad_z_id=gMC->CurrentVolOffID(2,copy);
+ pad_z=copy;
+
+ pad_x_id=gMC->CurrentVolOffID(1,copy);
+ pad_x=copy;
+
+ strip_id=gMC->CurrentVolOffID(5,copy);
+ strip=copy;
+
+ gMC->TrackPosition(pos);
+ gMC->TrackMomentum(mom);
+
+// Double_t NormPos=1./pos.Rho();
+ Double_t NormMom=1./mom.Rho();
+
+// getting the cohordinates in pad ref system
+ xm[0] = (Float_t)pos.X();
+ xm[1] = (Float_t)pos.Y();
+ xm[2] = (Float_t)pos.Z();
+
+ pm[0] = (Float_t)mom.X()*NormMom;
+ pm[1] = (Float_t)mom.Y()*NormMom;
+ pm[2] = (Float_t)mom.Z()*NormMom;
+
+ gMC->Gmtod(xm,xpad,1);
+ gMC->Gmtod(pm,ppad,2);
+
+ IncidenceAngle = TMath::ACos(ppad[1])*kRaddeg;
+
+ z = pos[2];
+
+ plate = 0;
+ if (TMath::Abs(z) <= fZlenA*0.5) plate = 3;
+ if (z < (fZlenA*0.5+fZlenB) &&
+ z > fZlenA*0.5) plate = 4;
+ if (z >-(fZlenA*0.5+fZlenB) &&
+ z < -fZlenA*0.5) plate = 2;
+ if (z > (fZlenA*0.5+fZlenB)) plate = 5;
+ if (z <-(fZlenA*0.5+fZlenB)) plate = 1;
+
+ phi = pos.Phi();
+ phid = phi*kRaddeg+180.;
+ sector = Int_t (phid/20.);
+ sector++;
+
+ for(i=0;i<3;++i) {
+ hits[i] = pos[i];
+ hits[i+3] = pm[i];
}
- pMC->TrackPosition(hits);
- pMC->TrackMomentum(&hits[3]);
- hits[7]=pMC->TrackTime();
- new(lhits[fNhits++]) AliTOFhit(fIshunt,gAlice->CurrentTrack(),vol,hits);
+
+ hits[6] = mom.Rho();
+ hits[7] = pos[3];
+ hits[8] = xpad[0];
+ hits[9] = xpad[1];
+ hits[10]= xpad[2];
+ hits[11]= IncidenceAngle;
+ hits[12]= gMC->Edep();
+
+ vol[0]= sector;
+ vol[1]= plate;
+ vol[2]= strip;
+ vol[3]= pad_x;
+ vol[4]= pad_z;
+
+ AddHit(gAlice->CurrentTrack(),vol, hits);
}
}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff