/*
$Log$
-Revision 1.2 1999/10/16 19:22:18 fca
+Revision 1.9 2001/05/04 10:09:48 vicinanz
+Major upgrades to the strip structure
+
+Revision 1.8 2000/12/04 08:48:20 alibrary
+Fixing problems in the HEAD
+
+Revision 1.7 2000/10/02 21:28:17 fca
+Removal of useless dependecies via forward declarations
+
+Revision 1.6 2000/05/10 16:52:18 vicinanz
+New TOF version with holes for PHOS/RICH
+
+Revision 1.4.2.1 2000/05/10 09:37:16 vicinanz
+New version with Holes for PHOS/RICH
+
+Revision 1.14 1999/11/05 22:39:06 fca
+New hits structure
+
+Revision 1.13 1999/11/02 11:26:39 fca
+added stdlib.h for exit
+
+Revision 1.12 1999/11/01 20:41:57 fca
+Added protections against using the wrong version of FRAME
+
+Revision 1.11 1999/10/22 08:04:14 fca
+Correct improper use of negative parameters
+
+Revision 1.10 1999/10/16 19:30:06 fca
Corrected Rotation Matrix and CVS log
-Revision 1.1 1999/10/15 15:35:20 fca
+Revision 1.9 1999/10/15 15:35:20 fca
New version for frame1099 with and without holes
+Revision 1.8 1999/09/29 09:24:33 fca
+Introduction of the Copyright and cvs Log
+
*/
///////////////////////////////////////////////////////////////////////////////
// //
-// Time Of Flight: design of C.Williams FCA //
+// Time Of Flight: design of C.Williams
+//
// This class contains the functions for version 1 of the Time Of Flight //
// detector. //
//
-// VERSION WITH 5 MODULES AND FLAT PLATES
+// VERSION WITH 5 MODULES AND TILTED STRIPS
//
-// WITH HOLES FOR PHOS AND HMPID inside the
-// SPACE FRAME WITH HOLES
+// FULL COVERAGE VERSION
//
// Authors:
//
// Alessio Seganti
-// Domenico Vicinanza
+// Domenico Vicinanza
//
// University of Salerno - Italy
//
+// Fabrizio Pierella
+// University of Bologna - Italy
+//
//
//Begin_Html
/*
// //
///////////////////////////////////////////////////////////////////////////////
+#include <iostream.h>
#include <stdlib.h>
#include "AliTOFv4.h"
+#include "TBRIK.h"
+#include "TGeometry.h"
+#include "TNode.h"
+#include <TLorentzVector.h>
+#include "TObject.h"
#include "AliRun.h"
+#include "AliMC.h"
#include "AliConst.h"
+
ClassImp(AliTOFv4)
//_____________________________________________________________________________
AliTOFv4::AliTOFv4(const char *name, const char *title)
- : AliTOF(name,title)
+ : AliTOF(name,title)
{
//
// Standard constructor
//
+ //
+ // Check that FRAME is there otherwise we have no place where to
+ // put TOF
+ AliModule* frame=gAlice->GetModule("FRAME");
+ if(!frame) {
+ Error("Ctor","TOF needs FRAME to be present\n");
+ exit(1);
+ } else
+ if(frame->IsVersion()!=1) {
+ Error("Ctor","FRAME version 1 needed with this version of TOF\n");
+ exit(1);
+ }
+
+}
+
+//____________________________________________________________________________
+AliTOFv4::~AliTOFv4()
+{
+ // destructor
+
+ if ( fHits) {
+ fHits->Delete() ;
+ delete fHits ;
+ fHits = 0 ;
+ }
+/*
+ if ( fSDigits) {
+ fSDigits->Delete() ;
+ delete fSDigits ;
+ fSDigits = 0 ;
+ }
+*/
+ if ( fDigits) {
+ fDigits->Delete() ;
+ delete fDigits ;
+ fDigits = 0 ;
+ }
+
+}
+
+//_____________________________________________________________________________
+void AliTOFv4::BuildGeometry()
+{
+ //
+ // Build TOF ROOT geometry for the ALICE event display
+ //
+ TNode *node, *top;
+ const int kColorTOF = 27;
+
+ // Find top TNODE
+ top = gAlice->GetGeometry()->GetNode("alice");
+
+ // Position the different copies
+ const Float_t krTof =(fRmax+fRmin)/2;
+ const Float_t khTof = fRmax-fRmin;
+ const Int_t kNTof = fNTof;
+ const Float_t kPi = TMath::Pi();
+ const Float_t kangle = 2*kPi/kNTof;
+ Float_t ang;
+
+ // Define TOF basic volume
+
+ char nodeName0[7], nodeName1[7], nodeName2[7];
+ char nodeName3[7], nodeName4[7], rotMatNum[7];
+
+ new TBRIK("S_TOF_C","TOF box","void",
+ 120*0.5,khTof*0.5,fZlenC*0.5);
+ new TBRIK("S_TOF_B","TOF box","void",
+ 120*0.5,khTof*0.5,fZlenB*0.5);
+ new TBRIK("S_TOF_A","TOF box","void",
+ 120*0.5,khTof*0.5,fZlenA*0.5);
+
+ for (Int_t nodeNum=1;nodeNum<19;nodeNum++){
+
+ if (nodeNum<10) {
+ sprintf(rotMatNum,"rot50%i",nodeNum);
+ sprintf(nodeName0,"FTO00%i",nodeNum);
+ sprintf(nodeName1,"FTO10%i",nodeNum);
+ sprintf(nodeName2,"FTO20%i",nodeNum);
+ sprintf(nodeName3,"FTO30%i",nodeNum);
+ sprintf(nodeName4,"FTO40%i",nodeNum);
+ }
+ if (nodeNum>9) {
+ sprintf(rotMatNum,"rot5%i",nodeNum);
+ sprintf(nodeName0,"FTO0%i",nodeNum);
+ sprintf(nodeName1,"FTO1%i",nodeNum);
+ sprintf(nodeName2,"FTO2%i",nodeNum);
+ sprintf(nodeName3,"FTO3%i",nodeNum);
+ sprintf(nodeName4,"FTO4%i",nodeNum);
+ }
+
+ new TRotMatrix(rotMatNum,rotMatNum,90,-20*nodeNum,90,90-20*nodeNum,0,0);
+ ang = (4.5-nodeNum) * kangle;
+
+ top->cd();
+ node = new TNode(nodeName0,nodeName0,"S_TOF_C",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),299.15,rotMatNum);
+ node->SetLineColor(kColorTOF);
+ fNodes->Add(node);
+
+ top->cd();
+ node = new TNode(nodeName1,nodeName1,"S_TOF_C",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),-299.15,rotMatNum);
+ node->SetLineColor(kColorTOF);
+ fNodes->Add(node);
+
+ top->cd();
+ node = new TNode(nodeName2,nodeName2,"S_TOF_B",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),146.45,rotMatNum);
+ node->SetLineColor(kColorTOF);
+ fNodes->Add(node);
+
+ top->cd();
+ node = new TNode(nodeName3,nodeName3,"S_TOF_B",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),-146.45,rotMatNum);
+ node->SetLineColor(kColorTOF);
+ fNodes->Add(node);
+
+ top->cd();
+ node = new TNode(nodeName4,nodeName4,"S_TOF_A",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),0.,rotMatNum);
+ node->SetLineColor(kColorTOF);
+ fNodes->Add(node);
+ } // end loop on nodeNum
}
+
+
//_____________________________________________________________________________
void AliTOFv4::CreateGeometry()
}
//_____________________________________________________________________________
-void AliTOFv4::TOFpc(Float_t xtof, Float_t ytof, Float_t zlen1,
- Float_t zlen2, Float_t zlen3, Float_t ztof0)
+void AliTOFv4::TOFpc(Float_t xtof, Float_t ytof, Float_t zlenC,
+ Float_t zlenB, Float_t zlenA, Float_t ztof0)
{
//
// Definition of the Time Of Fligh Resistive Plate Chambers
// xFLT, yFLT, zFLT - sizes of TOF modules (large)
- Int_t idrotm[100];
Float_t ycoor, zcoor;
- Float_t par[10];
- Float_t yFREON, xp, yp, zp;
+ Float_t par[3];
+ Int_t *idtmed = fIdtmed->GetArray()-499;
+ Int_t idrotm[100];
+ Int_t nrot = 0;
+ Float_t hTof = fRmax-fRmin;
- Int_t *idtmed = fIdtmed->GetArray()-499;
+ Float_t radius = fRmin+2.;//cm
- par[0] = xtof / 2.;
- par[1] = ytof / 2.;
- par[2] = zlen1 / 2.;
- gMC->Gsvolu("FTO1", "BOX ", idtmed[506], par, 3);
- par[2] = zlen2 / 2.;
- gMC->Gsvolu("FTO2", "BOX ", idtmed[506], par, 3);
- par[2] = zlen3 / 2.;
- gMC->Gsvolu("FTO3", "BOX ", idtmed[506], par, 3);
+ par[0] = xtof * 0.5;
+ par[1] = ytof * 0.5;
+ par[2] = zlenC * 0.5;
+ gMC->Gsvolu("FTOC", "BOX ", idtmed[506], par, 3);
+ par[2] = zlenB * 0.5;
+ gMC->Gsvolu("FTOB", "BOX ", idtmed[506], par, 3);
+ par[2] = zlenA * 0.5;
+ gMC->Gsvolu("FTOA", "BOX ", idtmed[506], par, 3);
// Positioning of modules
- Float_t zcor1 = ztof0 - zlen1/2;
- Float_t zcor2 = ztof0 - zlen1 - zlen2/2.;
+ Float_t zcor1 = ztof0 - zlenC*0.5;
+ Float_t zcor2 = ztof0 - zlenC - zlenB*0.5;
Float_t zcor3 = 0.;
- AliMatrix(idrotm[0], 90., 0., 0., 0., 90, -90.);
- AliMatrix(idrotm[1], 90., 180., 0., 0., 90, 90.);
- gMC->Gspos("FTO1", 1, "BTO1", 0, zcor1, 0, idrotm[0], "ONLY");
- gMC->Gspos("FTO1", 2, "BTO1", 0, -zcor1, 0, idrotm[1], "ONLY");
- zcoor = (zlen1/2.);
- gMC->Gspos("FTO1", 1, "BTO2", 0, zcoor, 0, idrotm[0], "ONLY");
- zcoor = 0.;
- gMC->Gspos("FTO1", 1, "BTO3", 0, zcoor, 0, idrotm[0], "ONLY");
-
- gMC->Gspos("FTO2", 1, "BTO1", 0, zcor2, 0, idrotm[0], "ONLY");
- gMC->Gspos("FTO2", 2, "BTO1", 0, -zcor2, 0, idrotm[1], "ONLY");
- zcoor = -zlen2/2.;
- gMC->Gspos("FTO2", 0, "BTO2", 0, zcoor, 0, idrotm[0], "ONLY");
-
- gMC->Gspos("FTO3", 0, "BTO1", 0, zcor3, 0, idrotm[0], "ONLY");
-
-// Subtraction the distance to TOF module boundaries
-
- Float_t db = 7.;
- Float_t xFLT, yFLT, zFLT1, zFLT2, zFLT3;
-
- xFLT = xtof -(.5 +.5)*2;
+ AliMatrix(idrotm[0], 90., 0., 0., 0., 90,-90.);
+ AliMatrix(idrotm[1], 90.,180., 0., 0., 90, 90.);
+ gMC->Gspos("FTOC", 1, "BTO1", 0, zcor1, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOC", 2, "BTO1", 0, -zcor1, 0, idrotm[1], "ONLY");
+ gMC->Gspos("FTOC", 1, "BTO2", 0, zcor1, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOC", 2, "BTO2", 0, -zcor1, 0, idrotm[1], "ONLY");
+ gMC->Gspos("FTOC", 1, "BTO3", 0, zcor1, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOC", 2, "BTO3", 0, -zcor1, 0, idrotm[1], "ONLY");
+
+ gMC->Gspos("FTOB", 1, "BTO1", 0, zcor2, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOB", 2, "BTO1", 0, -zcor2, 0, idrotm[1], "ONLY");
+ gMC->Gspos("FTOB", 1, "BTO2", 0, zcor2, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOB", 2, "BTO2", 0, -zcor2, 0, idrotm[1], "ONLY");
+ gMC->Gspos("FTOB", 1, "BTO3", 0, zcor2, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOB", 2, "BTO3", 0, -zcor2, 0, idrotm[1], "ONLY");
+
+ gMC->Gspos("FTOA", 0, "BTO1", 0, zcor3, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOA", 0, "BTO2", 0, zcor3, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOA", 0, "BTO3", 0, zcor3, 0, idrotm[0], "ONLY");
+
+ Float_t db = 0.5;//cm
+ Float_t xFLT, xFST, yFLT, zFLTA, zFLTB, zFLTC;
+
+ xFLT = fStripLn;
yFLT = ytof;
- zFLT1 = zlen1 - db;
- zFLT2 = zlen2 - db;
- zFLT3 = zlen3 - db;
-
+ zFLTA = zlenA;
+ zFLTB = zlenB;
+ zFLTC = zlenC;
-
-// freon gaps in MRPC chamber
- yFREON = .11; //cm
+ xFST = xFLT-fDeadBndX*2;//cm
// Sizes of MRPC pads
- xp = 3.0;
- yp = 12.3*0.05; // 5% X0 of glass
- zp = 3.0;
-
-// Subtraction of dead boundaries in X=2 cm and Z=7/2 cm
-
-cout <<"************************* TOF geometry **************************"<<endl;
-
- Int_t nz1, nz2, nz3, nx; //- numbers of pixels
- nx = Int_t (xFLT/xp);
-
- printf("Number of pixel along x axis = %i",nx);
-
- par[0] = xFLT/2;
- par[1] = yFLT/2;
- par[2] = (zFLT1 / 2.);
- nz1 = Int_t (par[2]*2/zp);
- gMC->Gsvolu("FLT1", "BOX ", idtmed[506], par, 3); // CO2
- gMC->Gspos("FLT1", 0, "FTO1", 0., 0., 0., 0, "ONLY");
- printf("Number of pixel along z axis (module 1) = %i",nz1);
-
- par[2] = (zFLT2 / 2.);
- nz2 = Int_t (par[2]*2/zp);
- gMC->Gsvolu("FLT2", "BOX ", idtmed[506], par, 3); // CO2
- gMC->Gspos("FLT2", 0, "FTO2", 0., 0., 0., 0, "ONLY");
- printf("Number of pixel along z axis (module 2) = %i",nz2);
-
- par[2] = (zFLT3 / 2.);
- nz3 = Int_t (par[2]*2/zp);
- gMC->Gsvolu("FLT3", "BOX ", idtmed[506], par, 3); // CO2
- gMC->Gspos("FLT3", 0, "FTO3", 0., 0., 0., 0, "ONLY");
- printf("Number of pixel along z axis (module 3) = %i",nz3);
+ Float_t yPad = 0.505;//cm
+
+// Large not sensitive volumes with Insensitive Freon
+ par[0] = xFLT*0.5;
+ par[1] = yFLT*0.5;
+
+ if (fDebug) cout << ClassName() <<
+ ": ************************* TOF geometry **************************"<<endl;
+
+ par[2] = (zFLTA *0.5);
+ gMC->Gsvolu("FLTA", "BOX ", idtmed[512], par, 3); // Insensitive Freon
+ gMC->Gspos ("FLTA", 0, "FTOA", 0., 0., 0., 0, "ONLY");
-////////// Layers before detector ////////////////////
+ par[2] = (zFLTB * 0.5);
+ gMC->Gsvolu("FLTB", "BOX ", idtmed[512], par, 3); // Insensitive Freon
+ gMC->Gspos ("FLTB", 0, "FTOB", 0., 0., 0., 0, "ONLY");
-// Alluminium layer in front 1.0 mm thick at the beginning
- par[0] = -1;
- par[1] = 0.1;
- par[2] = -1;
+ par[2] = (zFLTC * 0.5);
+ gMC->Gsvolu("FLTC", "BOX ", idtmed[512], par, 3); // Insensitive Freon
+ gMC->Gspos ("FLTC", 0, "FTOC", 0., 0., 0., 0, "ONLY");
+
+////////// Layers of Aluminum before and after detector //////////
+////////// Aluminum Box for Modules (2.0 mm thickness) /////////
+////////// lateral walls not simulated
+ par[0] = xFLT*0.5;
+ par[1] = 0.1;//cm
ycoor = -yFLT/2 + par[1];
- gMC->Gsvolu("FMY1", "BOX ", idtmed[508], par, 3); // Alluminium
- gMC->Gspos("FMY1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FMY2", "BOX ", idtmed[508], par, 3); // Alluminium
- gMC->Gspos("FMY2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FMY3", "BOX ", idtmed[508], par, 3); // Alluminium
- gMC->Gspos("FMY3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
-
-// Honeycomb layer (1cm of special polyethilene)
- ycoor = ycoor + par[1];
- par[0] = -1;
- par[1] = 0.5;
- par[2] = -1;
- ycoor = ycoor + par[1];
- gMC->Gsvolu("FPL1", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FPL1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FPL2", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FPL2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FPL3", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FPL3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
-
+ par[2] = (zFLTA *0.5);
+ gMC->Gsvolu("FALA", "BOX ", idtmed[508], par, 3); // Alluminium
+ gMC->Gspos ("FALA", 1, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gspos ("FALA", 2, "FLTA", 0.,-ycoor, 0., 0, "ONLY");
+ par[2] = (zFLTB *0.5);
+ gMC->Gsvolu("FALB", "BOX ", idtmed[508], par, 3); // Alluminium
+ gMC->Gspos ("FALB", 1, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gspos ("FALB", 2, "FLTB", 0.,-ycoor, 0., 0, "ONLY");
+ par[2] = (zFLTC *0.5);
+ gMC->Gsvolu("FALC", "BOX ", idtmed[508], par, 3); // Alluminium
+ gMC->Gspos ("FALC", 1, "FLTC", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gspos ("FALC", 2, "FLTC", 0.,-ycoor, 0., 0, "ONLY");
+
///////////////// Detector itself //////////////////////
- const Float_t SpaceBefore=2.; // Space Beetween detector & Front Panel
+ const Float_t kdeadBound = fDeadBndZ; //cm non-sensitive between the pad edge
+ //and the boundary of the strip
+ const Int_t knx = fNpadX; // number of pads along x
+ const Int_t knz = fNpadZ; // number of pads along z
+ const Float_t kspace = fSpace; //cm distance from the front plate of the box
- par[0] = -1;
- par[1] = yp/2; // 5 %X0 thick of glass
- par[2] = -1;
- ycoor = -yFLT/2 + SpaceBefore;
- gMC->Gsvolu("FLD1", "BOX ", idtmed[514], par, 3); // Glass
- gMC->Gspos("FLD1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FLD2", "BOX ", idtmed[514], par, 3); // Glass
- gMC->Gspos("FLD2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FLD3", "BOX ", idtmed[514], par, 3); // Glass
- gMC->Gspos("FLD3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
-
- gMC->Gsdvn("FLZ1", "FLD1", nz1, 3); //pixel size xp=zp=3
- gMC->Gsdvn("FLZ2", "FLD2", nz2, 3);
- gMC->Gsdvn("FLZ3", "FLD3", nz3, 3);
- gMC->Gsdvn("FLX1", "FLZ1", nx, 1);
- gMC->Gsdvn("FLX2", "FLZ2", nx, 1);
- gMC->Gsdvn("FLX3", "FLZ3", nx, 1);
-
-// MRPC pixel itself
- par[0] = -1;//xp/2;
- par[1] = -1;//yp/2; // 5 %X0 thick of glass
- par[2] = -1;//zp/2;
- gMC->Gsvolu("FPA0", "BOX ", idtmed[514], par, 3);// Glass
- gMC->Gspos("FPA0", 1, "FLX1", 0., 0., 0., 0, "ONLY");
- gMC->Gspos("FPA0", 2, "FLX2", 0., 0., 0., 0, "ONLY");
- gMC->Gspos("FPA0", 3, "FLX3", 0., 0., 0., 0, "ONLY");
-
-// Freon gas sencitive vol.ume
- par[0] = -1;
- par[1] = yFREON/2;
- par[2] = -1;
- gMC->Gsvolu("FPAD", "BOX ", idtmed[513], par, 3);// Freon
- gMC->Gspos("FPAD", 0, "FPA0", 0., 0., 0., 0, "ONLY");
+ Float_t zSenStrip = fZpad*fNpadZ;//cm
+ Float_t stripWidth = zSenStrip + 2*kdeadBound;
-////////// Layers after detector ////////////////////
+ par[0] = xFLT*0.5;
+ par[1] = yPad*0.5;
+ par[2] = stripWidth*0.5;
+
+// new description for strip volume
+// -- all constants are expressed in cm
+// heigth of different layers
+ const Float_t khhony = 1. ; // heigth of HONY Layer
+ const Float_t khpcby = 0.15 ; // heigth of PCB Layer
+ const Float_t khmyly = 0.035 ; // heigth of MYLAR Layer
+ const Float_t khgraphy = 0.02 ; // heigth of GRAPHITE Layer
+ const Float_t khglasseiy = 0.32; // 2.2 Ext. Glass + 1. Semi Int. Glass (mm)
+ const Float_t khsensmy = 0.11 ; // heigth of Sensitive Freon Mixture
+ const Float_t kwsensmz = 2*3.5 ; // cm
+ const Float_t klsensmx = 48*2.5; // cm
+ const Float_t kwpadz = 3.5; // cm z dimension of the FPAD volume
+ const Float_t klpadx = 2.5; // cm x dimension of the FPAD volume
+
+ // heigth of the FSTR Volume (the strip volume)
+ const Float_t khstripy = 2*(khhony+khpcby+khmyly+khgraphy+khglasseiy)+khsensmy;
+ // width of the FSTR Volume (the strip volume)
+ const Float_t kwstripz = 10.;
+ // length of the FSTR Volume (the strip volume)
+ const Float_t klstripx = 122.;
+
+ Float_t parfp[3]={klstripx*0.5,khstripy*0.5,kwstripz*0.5};
+// coordinates of the strip center in the strip reference frame; used for positioning
+// internal strip volumes
+ Float_t posfp[3]={0.,0.,0.};
+
+ // FSTR volume definition and filling this volume with non sensitive Gas Mixture
+ gMC->Gsvolu("FSTR","BOX",idtmed[512],parfp,3);
+ //-- HONY Layer definition
+// parfp[0] = -1;
+ parfp[1] = khhony*0.5;
+// parfp[2] = -1;
+ gMC->Gsvolu("FHON","BOX",idtmed[503],parfp,3);
+ // positioning 2 HONY Layers on FSTR volume
+ posfp[1]=-khstripy*0.5+parfp[1];
+ gMC->Gspos("FHON",1,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FHON",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+
+ //-- PCB Layer definition
+ parfp[1] = khpcby*0.5;
+ gMC->Gsvolu("FPCB","BOX",idtmed[504],parfp,3);
+ // positioning 2 PCB Layers on FSTR volume
+ posfp[1]=-khstripy*0.5+khhony+parfp[1];
+ gMC->Gspos("FPCB",1,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FPCB",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+
+ //-- MYLAR Layer definition
+ parfp[1] = khmyly*0.5;
+ gMC->Gsvolu("FMYL","BOX",idtmed[511],parfp,3);
+ // positioning 2 MYLAR Layers on FSTR volume
+ posfp[1] = -khstripy*0.5+khhony+khpcby+parfp[1];
+ gMC->Gspos("FMYL",1,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FMYL",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+
+ //-- Graphite Layer definition
+ parfp[1] = khgraphy*0.5;
+ gMC->Gsvolu("FGRP","BOX",idtmed[502],parfp,3);
+ // positioning 2 Graphite Layers on FSTR volume
+ posfp[1] = -khstripy*0.5+khhony+khpcby+khmyly+parfp[1];
+ gMC->Gspos("FGRP",1,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FGRP",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+
+ //-- Glass (EXT. +Semi INT.) Layer definition
+ parfp[1] = khglasseiy*0.5;
+ gMC->Gsvolu("FGLA","BOX",idtmed[514],parfp,3);
+ // positioning 2 Glass Layers on FSTR volume
+ posfp[1] = -khstripy*0.5+khhony+khpcby+khmyly+khgraphy+parfp[1];
+ gMC->Gspos("FGLA",1,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FGLA",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+
+ //-- Sensitive Mixture Layer definition
+ parfp[0] = klsensmx*0.5;
+ parfp[1] = khsensmy*0.5;
+ parfp[2] = kwsensmz*0.5;
+ gMC->Gsvolu("FSEN","BOX",idtmed[513],parfp,3);
+ // positioning the sensitive gas Layer on FSTR volume
+ gMC->Gspos("FSEN",0,"FSTR",0.,0.,0.,0,"ONLY");
+
+ // dividing FSEN along z in knz=2 and along x in knx=48
+ gMC->Gsdvn("FSEZ","FSEN",knz,3);
+ gMC->Gsdvn("FSEX","FSEZ",knx,1);
+
+ // FPAD volume definition
+ parfp[0] = klpadx*0.5;
+ parfp[1] = khsensmy*0.5;
+ parfp[2] = kwpadz*0.5;
+ gMC->Gsvolu("FPAD","BOX",idtmed[513],parfp,3);
+ // positioning the FPAD volumes on previous divisions
+ gMC->Gspos("FPAD",0,"FSEX",0.,0.,0.,0,"ONLY");
+
+//// Positioning the Strips (FSTR) in the FLT volumes /////
- const Float_t SpaceAfter = 6.; //Space beetween detector & Back Panel
+ // Plate A (Central)
-// Honeycomb layer after (3cm)
- par[0] = -1;
+ Float_t t = zFLTC+zFLTB+zFLTA*0.5+ 2*db;//Half Width of Barrel
+
+ Float_t gap = fGapA; //cm distance between the strip axis
+ Float_t zpos = 0;
+ Float_t ang = 0;
+ Int_t i=1,j=1;
+ nrot = 0;
+ zcoor = 0;
+ ycoor = -14.5 + kspace ; //2 cm over front plate
+
+ AliMatrix (idrotm[0], 90., 0.,90.,90.,0., 90.);
+ gMC->Gspos("FSTR",j,"FLTA",0.,ycoor, 0.,idrotm[0],"ONLY");
+ if(fDebug) {
+ printf("%s: %f, St. %2i, Pl.3 ",ClassName(),ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ }
+ zcoor -= zSenStrip;
+ j++;
+ Int_t upDown = -1; // upDown=-1 -> Upper strip
+ // upDown=+1 -> Lower strip
+ do{
+ ang = atan(zcoor/radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0.,90.-ang,90.,-ang, 90.);
+ AliMatrix (idrotm[nrot+1],90.,180.,90.+ang,90., ang, 90.);
+ ang /= kRaddeg;
+ ycoor = -14.5+ kspace; //2 cm over front plate
+ ycoor += (1-(upDown+1)/2)*gap;
+ gMC->Gspos("FSTR",j ,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY");
+ gMC->Gspos("FSTR",j+1,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY");
+ if(fDebug) {
+ printf("%s: %f, St. %2i, Pl.3 ",ClassName(),ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ }
+ j += 2;
+ upDown*= -1; // Alternate strips
+ zcoor = zcoor-(zSenStrip/2)/TMath::Cos(ang)-
+ upDown*gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang);
+ } while (zcoor-(stripWidth/2)*TMath::Cos(ang)>-t+zFLTC+zFLTB+db*2);
+
+ zcoor = zcoor+(zSenStrip/2)/TMath::Cos(ang)+
+ upDown*gap*TMath::Tan(ang)+
+ (zSenStrip/2)/TMath::Cos(ang);
+
+ gap = fGapB;
+ zcoor = zcoor-(zSenStrip/2)/TMath::Cos(ang)-
+ upDown*gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang);
+
+ ang = atan(zcoor/radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0.,90.-ang,90.,-ang, 90.);
+ AliMatrix (idrotm[nrot+1],90.,180.,90.+ang,90., ang, 90.);
+ ang /= kRaddeg;
+
+ ycoor = -14.5+ kspace; //2 cm over front plate
+ ycoor += (1-(upDown+1)/2)*gap;
+ gMC->Gspos("FSTR",j ,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY");
+ gMC->Gspos("FSTR",j+1,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY");
+ if(fDebug) {
+ printf("%s: %f, St. %2i, Pl.3 ",ClassName(),ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ }
+ ycoor = -hTof/2.+ kspace;//2 cm over front plate
+
+ // Plate B
+
+ nrot = 0;
+ i=1;
+ upDown = 1;
+ Float_t deadRegion = 1.0;//cm
+
+ zpos = zcoor - (zSenStrip/2)/TMath::Cos(ang)-
+ upDown*gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang)-
+ deadRegion/TMath::Cos(ang);
+
+ ang = atan(zpos/radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
+ ang /= kRaddeg;
+ ycoor = -hTof*0.5+ kspace ; //2 cm over front plate
+ ycoor += (1-(upDown+1)/2)*gap;
+ zcoor = zpos+(zFLTA*0.5+zFLTB*0.5+db); // Moves to the system of the modulus FLTB
+ gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
+ if(fDebug) {
+ printf("%s: %f, St. %2i, Pl.4 ",ClassName(),ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ }
+ i++;
+ upDown*=-1;
+
+ do {
+ zpos = zpos - (zSenStrip/2)/TMath::Cos(ang)-
+ upDown*gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang);
+ ang = atan(zpos/radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
+ ang /= kRaddeg;
+ ycoor = -hTof*0.5+ kspace ; //2 cm over front plate
+ ycoor += (1-(upDown+1)/2)*gap;
+ zcoor = zpos+(zFLTA*0.5+zFLTB*0.5+db); // Moves to the system of the modulus FLTB
+ gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
+ if(fDebug) {
+ printf("%s: %f, St. %2i, Pl.4 ",ClassName(),ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ }
+ upDown*=-1;
+ i++;
+ } while (TMath::Abs(ang*kRaddeg)<22.5);
+ //till we reach a tilting angle of 22.5 degrees
+
+ ycoor = -hTof*0.5+ kspace ; //2 cm over front plate
+ zpos = zpos - zSenStrip/TMath::Cos(ang);
+
+ do {
+ ang = atan(zpos/radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
+ ang /= kRaddeg;
+ zcoor = zpos+(zFLTB/2+zFLTA/2+db);
+ gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
+ zpos = zpos - zSenStrip/TMath::Cos(ang);
+ if(fDebug) {
+ printf("%s: %f, St. %2i, Pl.4 ",ClassName(),ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ }
+ i++;
+
+ } while (zpos-stripWidth*0.5/TMath::Cos(ang)>-t+zFLTC+db);
+
+ // Plate C
+
+ zpos = zpos + zSenStrip/TMath::Cos(ang);
+
+ zpos = zpos - (zSenStrip/2)/TMath::Cos(ang)+
+ gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang);
+
+ nrot = 0;
+ i=0;
+ ycoor= -hTof*0.5+kspace+gap;
+
+ do {
+ i++;
+ ang = atan(zpos/radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
+ ang /= kRaddeg;
+ zcoor = zpos+(zFLTC*0.5+zFLTB+zFLTA*0.5+db*2);
+ gMC->Gspos("FSTR",i, "FLTC", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
+ if(fDebug) {
+ printf("%s: %f, St. %2i, Pl.5 ",ClassName(),ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ }
+ zpos = zpos - zSenStrip/TMath::Cos(ang);
+ } while (zpos-stripWidth*TMath::Cos(ang)*0.5>-t);
+
+
+////////// Layers after strips /////////////////
+// honeycomb (Polyethilene) Layer after (1.2cm)
+
+ Float_t overSpace = fOverSpc;//cm
+
+ par[0] = xFLT*0.5;
par[1] = 0.6;
- par[2] = -1;
- ycoor = -yFLT/2 + SpaceAfter - par[1];
- gMC->Gsvolu("FPE1", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FPE1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FPE2", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FPE2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FPE3", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FPE3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
+ par[2] = (zFLTA *0.5);
+ ycoor = -yFLT/2 + overSpace + par[1];
+ gMC->Gsvolu("FPEA", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FPEA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ par[2] = (zFLTB *0.5);
+ gMC->Gsvolu("FPEB", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FPEB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ par[2] = (zFLTC *0.5);
+ gMC->Gsvolu("FPEC", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FPEC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
// Electronics (Cu) after
+ ycoor += par[1];
+ par[0] = xFLT*0.5;
+ par[1] = 1.43*0.05*0.5; // 5% of X0
+ par[2] = (zFLTA *0.5);
+ ycoor += par[1];
+ gMC->Gsvolu("FECA", "BOX ", idtmed[501], par, 3); // Cu
+ gMC->Gspos ("FECA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ par[2] = (zFLTB *0.5);
+ gMC->Gsvolu("FECB", "BOX ", idtmed[501], par, 3); // Cu
+ gMC->Gspos ("FECB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ par[2] = (zFLTC *0.5);
+ gMC->Gsvolu("FECC", "BOX ", idtmed[501], par, 3); // Cu
+ gMC->Gspos ("FECC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
+
+// cooling WAter after
+ ycoor += par[1];
+ par[0] = xFLT*0.5;
+ par[1] = 36.1*0.02*0.5; // 2% of X0
+ par[2] = (zFLTA *0.5);
+ ycoor += par[1];
+ gMC->Gsvolu("FWAA", "BOX ", idtmed[515], par, 3); // Water
+ gMC->Gspos ("FWAA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ par[2] = (zFLTB *0.5);
+ gMC->Gsvolu("FWAB", "BOX ", idtmed[515], par, 3); // Water
+ gMC->Gspos ("FWAB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ par[2] = (zFLTC *0.5);
+ gMC->Gsvolu("FWAC", "BOX ", idtmed[515], par, 3); // Water
+ gMC->Gspos ("FWAC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
+
+// frame of Air
+ ycoor += par[1];
+ par[0] = xFLT*0.5;
+ par[1] = (yFLT/2-ycoor-0.2)*0.5; // Aluminum layer considered (0.2 cm)
+ par[2] = (zFLTA *0.5);
+ ycoor += par[1];
+ gMC->Gsvolu("FAIA", "BOX ", idtmed[500], par, 3); // Air
+ gMC->Gspos ("FAIA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ par[2] = (zFLTB *0.5);
+ gMC->Gsvolu("FAIB", "BOX ", idtmed[500], par, 3); // Air
+ gMC->Gspos ("FAIB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ par[2] = (zFLTC *0.5);
+ gMC->Gsvolu("FAIC", "BOX ", idtmed[500], par, 3); // Air
+ gMC->Gspos ("FAIC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
+/* fp
+//Back Plate honycomb (2cm)
par[0] = -1;
- par[1] = 1.43*0.05 / 2.; // 5% of X0
- par[2] = -1;
- ycoor = -yFLT/2 + SpaceAfter +par[1];
- gMC->Gsvolu("FEC1", "BOX ", idtmed[501], par, 3); // Cu
- gMC->Gspos("FEC1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FEC2", "BOX ", idtmed[501], par, 3); // Cu
- gMC->Gspos("FEC2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FEC3", "BOX ", idtmed[501], par, 3); // Cu
- gMC->Gspos("FEC3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
-
-// Cooling water after
- ycoor = ycoor+par[1];
- par[0] = -1;
- par[1] = 36.1*0.02 / 2.; // 2% of X0
- par[2] = -1;
- ycoor = ycoor+par[1];
- gMC->Gsvolu("FWA1", "BOX ", idtmed[515], par, 3); // Water
- gMC->Gspos("FWA1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FWA2", "BOX ", idtmed[515], par, 3); // Water
- gMC->Gspos("FWA2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FWA3", "BOX ", idtmed[515], par, 3); // Water
- gMC->Gspos("FWA3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
-
-//back plate honycomb (2cm)
- par[0] = -1;
- par[1] = 1.;
+ par[1] = 2 *0.5;
par[2] = -1;
ycoor = yFLT/2 - par[1];
- gMC->Gsvolu("FEG1", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FEG1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FEG2", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FEG2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FEG3", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FEG3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FBPA", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FBPA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FBPB", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FBPB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FBPC", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FBPC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
+fp */
}
//_____________________________________________________________________________
//
// Set the volumes visible
gMC->Gsatt("ALIC","SEEN",0);
- gMC->Gsatt("FBAR","SEEN",1);
- gMC->Gsatt("FTO1","SEEN",1);
- gMC->Gsatt("FTO2","SEEN",1);
- gMC->Gsatt("FTO3","SEEN",1);
- gMC->Gsatt("FBT1","SEEN",1);
- gMC->Gsatt("FBT2","SEEN",1);
- gMC->Gsatt("FBT3","SEEN",1);
- gMC->Gsatt("FDT1","SEEN",1);
- gMC->Gsatt("FDT2","SEEN",1);
- gMC->Gsatt("FDT3","SEEN",1);
- gMC->Gsatt("FLT1","SEEN",1);
- gMC->Gsatt("FLT2","SEEN",1);
- gMC->Gsatt("FLT3","SEEN",1);
- gMC->Gsatt("FPL1","SEEN",1);
- gMC->Gsatt("FPL2","SEEN",1);
- gMC->Gsatt("FPL3","SEEN",1);
- gMC->Gsatt("FLD1","SEEN",1);
- gMC->Gsatt("FLD2","SEEN",1);
- gMC->Gsatt("FLD3","SEEN",1);
- gMC->Gsatt("FLZ1","SEEN",1);
- gMC->Gsatt("FLZ2","SEEN",1);
- gMC->Gsatt("FLZ3","SEEN",1);
- gMC->Gsatt("FLX1","SEEN",1);
- gMC->Gsatt("FLX2","SEEN",1);
- gMC->Gsatt("FLX3","SEEN",1);
- gMC->Gsatt("FPA0","SEEN",1);
- //
+
+ gMC->Gsatt("FTOA","SEEN",1);
+ gMC->Gsatt("FTOB","SEEN",1);
+ gMC->Gsatt("FTOC","SEEN",1);
+ gMC->Gsatt("FLTA","SEEN",1);
+ gMC->Gsatt("FLTB","SEEN",1);
+ gMC->Gsatt("FLTC","SEEN",1);
+ gMC->Gsatt("FPLA","SEEN",1);
+ gMC->Gsatt("FPLB","SEEN",1);
+ gMC->Gsatt("FPLC","SEEN",1);
+ gMC->Gsatt("FSTR","SEEN",1);
+ gMC->Gsatt("FPEA","SEEN",1);
+ gMC->Gsatt("FPEB","SEEN",1);
+ gMC->Gsatt("FPEC","SEEN",1);
+
+ gMC->Gsatt("FLZ1","SEEN",0);
+ gMC->Gsatt("FLZ2","SEEN",0);
+ gMC->Gsatt("FLZ3","SEEN",0);
+ gMC->Gsatt("FLX1","SEEN",0);
+ gMC->Gsatt("FLX2","SEEN",0);
+ gMC->Gsatt("FLX3","SEEN",0);
+ gMC->Gsatt("FPAD","SEEN",0);
+
gMC->Gdopt("hide", "on");
gMC->Gdopt("shad", "on");
gMC->Gsatt("*", "fill", 7);
//
// Initialise the detector after the geometry has been defined
//
- printf("**************************************"
- " TOF "
- "**************************************\n");
- printf("\n Version 4 of TOF initialing, "
- "with openings for PHOS and RICH\n\n");
-
+ if(fDebug) {
+ printf("%s: **************************************"
+ " TOF "
+ "**************************************\n",ClassName());
+ printf("\n%s: Version 4 of TOF initialing, "
+ "symmetric TOF - Full Coverage version\n",ClassName());
+ }
AliTOF::Init();
- //
- // Check that FRAME is there otherwise we have no place where to
- // put TOF
- AliModule* FRAME=gAlice->GetModule("FRAME");
- if(!FRAME) {
- Error("Ctor","TOF needs FRAME to be present\n");
- exit(1);
- } else
- if(FRAME->IsVersion()!=0) {
- Error("Ctor","FRAME version 0 needed with this version of TOF\n");
- exit(1);
- }
-
- fIdFTO2=gMC->VolId("FTO2");
- fIdFTO3=gMC->VolId("FTO3");
- fIdFLT1=gMC->VolId("FLT1");
- fIdFLT2=gMC->VolId("FLT2");
- fIdFLT3=gMC->VolId("FLT3");
- printf("**************************************"
- " TOF "
- "**************************************\n");
+ fIdFTOA = gMC->VolId("FTOA");
+ fIdFTOB = gMC->VolId("FTOB");
+ fIdFTOC = gMC->VolId("FTOC");
+ fIdFLTA = gMC->VolId("FLTA");
+ fIdFLTB = gMC->VolId("FLTB");
+ fIdFLTC = gMC->VolId("FLTC");
+
+ if(fDebug) {
+ printf("%s: **************************************"
+ " TOF "
+ "**************************************\n",ClassName());
+ }
}
//_____________________________________________________________________________
// Procedure called at each step in the Time Of Flight
//
TLorentzVector mom, pos;
- Float_t hits[8];
- Int_t vol[3];
- Int_t copy, id, i;
- Int_t *idtmed = fIdtmed->GetArray()-499;
- if(gMC->GetMedium()==idtmed[514-1] &&
+ Float_t xm[3],pm[3],xpad[3],ppad[3];
+ Float_t hits[13],phi,phid,z;
+ Int_t vol[5];
+ Int_t sector, plate, padx, padz, strip;
+ Int_t copy, padzid, padxid, stripid, i;
+ Int_t *idtmed = fIdtmed->GetArray()-499;
+ Float_t incidenceAngle;
+
+ if(gMC->GetMedium()==idtmed[513] &&
gMC->IsTrackEntering() && gMC->TrackCharge()
- && gMC->CurrentVolID(copy)==fIdSens) {
- TClonesArray &lhits = *fHits;
- //
- // Record only charged tracks at entrance
- gMC->CurrentVolOffID(1,copy);
- vol[2]=copy;
- gMC->CurrentVolOffID(3,copy);
- vol[1]=copy;
- id=gMC->CurrentVolOffID(8,copy);
- vol[0]=copy;
- if(id==fIdFTO3) {
- vol[0]+=22;
- id=gMC->CurrentVolOffID(5,copy);
- if(id==fIdFLT3) vol[1]+=6;
- } else if (id==fIdFTO2) {
- vol[0]+=20;
- id=gMC->CurrentVolOffID(5,copy);
- if(id==fIdFLT2) vol[1]+=8;
- } else {
- id=gMC->CurrentVolOffID(5,copy);
- if(id==fIdFLT1) vol[1]+=14;
- }
+ && gMC->CurrentVolID(copy)==fIdSens)
+ {
+ // getting information about hit volumes
+
+ padzid=gMC->CurrentVolOffID(2,copy);
+ padz=copy;
+
+ padxid=gMC->CurrentVolOffID(1,copy);
+ padx=copy;
+
+ stripid=gMC->CurrentVolOffID(4,copy);
+ strip=copy;
+
gMC->TrackPosition(pos);
gMC->TrackMomentum(mom);
- //
- Double_t ptot=mom.Rho();
- Double_t norm=1/ptot;
+
+// Double_t NormPos=1./pos.Rho();
+ Double_t normMom=1./mom.Rho();
+
+// getting the cohordinates in pad ref system
+ xm[0] = (Float_t)pos.X();
+ xm[1] = (Float_t)pos.Y();
+ xm[2] = (Float_t)pos.Z();
+
+ pm[0] = (Float_t)mom.X()*normMom;
+ pm[1] = (Float_t)mom.Y()*normMom;
+ pm[2] = (Float_t)mom.Z()*normMom;
+
+ gMC->Gmtod(xm,xpad,1);
+ gMC->Gmtod(pm,ppad,2);
+
+ incidenceAngle = TMath::ACos(ppad[1])*kRaddeg;
+
+ z = pos[2];
+
+ plate = 0;
+ if (TMath::Abs(z) <= fZlenA*0.5) plate = 3;
+ if (z < (fZlenA*0.5+fZlenB) &&
+ z > fZlenA*0.5) plate = 4;
+ if (z >-(fZlenA*0.5+fZlenB) &&
+ z < -fZlenA*0.5) plate = 2;
+ if (z > (fZlenA*0.5+fZlenB)) plate = 5;
+ if (z <-(fZlenA*0.5+fZlenB)) plate = 1;
+
+ phi = pos.Phi();
+ phid = phi*kRaddeg+180.;
+ sector = Int_t (phid/20.);
+ sector++;
+
for(i=0;i<3;++i) {
- hits[i]=pos[i];
- hits[i+3]=mom[i]*norm;
+ hits[i] = pos[i];
+ hits[i+3] = pm[i];
}
- hits[6]=ptot;
- hits[7]=pos[3];
- new(lhits[fNhits++]) AliTOFhit(fIshunt,gAlice->CurrentTrack(),vol,hits);
+
+ hits[6] = mom.Rho();
+ hits[7] = pos[3];
+ hits[8] = xpad[0];
+ hits[9] = xpad[1];
+ hits[10]= xpad[2];
+ hits[11]= incidenceAngle;
+ hits[12]= gMC->Edep();
+
+ vol[0]= sector;
+ vol[1]= plate;
+ vol[2]= strip;
+ vol[3]= padx;
+ vol[4]= padz;
+
+ AddHit(gAlice->CurrentTrack(),vol, hits);
}
}
-
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff