#include <TMinuit.h>
#include <TH1F.h>
#include <TH2F.h>
+#include <AliSysInfo.h>
#include <TMath.h>
#include <TNtuple.h>
#include <TEntryList.h>
#include "AliRawReaderRoot.h"
+#include "AliRawHLTManager.h"
#include "AliTPCRawStream.h"
+#include "AliTPCRawStreamV3.h"
#include "AliTPCROC.h"
#include "AliTPCAltroEmulator.h"
AliTPCCalibTCF::AliTPCCalibTCF() :
TNamed(),
- fGateWidth(100),
+ fGateWidth(50),
fSample(900),
- fPulseLength(500),
+ fPulseLength(400),
fLowPulseLim(30),
- fUpPulseLim(1000),
- fRMSLim(2.5),
- fRatioIntLim(2.5)
+ fUpPulseLim(900),
+ fRMSLim(1.0),
+ fRatioIntLim(2)
{
//
//
}
+
+//_____________________________________________________________________________
+void AliTPCCalibTCF::ProcessRawFileV3(const char *nameRawFile, const char *nameFileOut) {
+ //
+ // New RCU data format!: Standard middle of 2009
+ //
+ // Loops over all events within one RawData file and collects proper pulses
+ // (according to given tresholds) per pad
+ // Histograms per pad are stored in 'nameFileOut'
+ //
+
+ AliRawReader *rawReader = AliRawReader::Create(nameRawFile);
+ if (!rawReader) {
+ printf("Could not create a raw reader for %s\n",nameRawFile);
+ return;
+ }
+
+ rawReader->RewindEvents(); // just to make sure
+
+ rawReader->Select("TPC");
+
+ if (!rawReader->NextEvent()) {
+ printf("no events found in %s\n",nameRawFile);
+ return;
+ }
+
+ // TPC stream reader
+ AliTPCRawStreamV3 rawStream(rawReader);
+
+ Int_t ievent=0;
+ do {
+ AliSysInfo::AddStamp(Form("start_event_%d",ievent), ievent,-1,-1);
+ printf("Reading next event ... Nr: %d\n",ievent);
+ // Start the basic data extraction
+ ProcessRawEventV3(rawReader, &rawStream, nameFileOut);
+ AliSysInfo::AddStamp(Form("end_event_%d",ievent), ievent,-1,-1);
+ ievent++;
+
+ } while (rawReader->NextEvent());
+
+ rawReader->~AliRawReader();
+
+}
+
+
//_____________________________________________________________________________
-void AliTPCCalibTCF::ProcessRawFile(const char *nameRawFile, const char *nameFileOut) {
+void AliTPCCalibTCF::ProcessRawFile(const char *nameRawFile, const char *nameFileOut, bool bUseHLTOUT) {
//
// Loops over all events within one RawData file and collects proper pulses
// (according to given tresholds) per pad
// Histograms per pad are stored in 'nameFileOut'
//
+ // create the data reader
AliRawReader *rawReader = new AliRawReaderRoot(nameRawFile);
- rawReader->Reset();
+ if (!rawReader) {
+ return;
+ }
+
+ // create HLT reader for redirection of TPC data from HLTOUT to TPC reconstruction
+ AliRawReader *hltReader=AliRawHLTManager::AliRawHLTManager::CreateRawReaderHLT(rawReader, "TPC");
+
+ // now choose the data source
+ if (bUseHLTOUT) rawReader=hltReader;
+
+ // rawReader->Reset();
+ rawReader->RewindEvents();
+
+ if (!rawReader->NextEvent()) {
+ printf("no events found in %s\n",nameRawFile);
+ return;
+ }
Int_t ievent=0;
- while ( rawReader->NextEvent() ){ // loop
+ do {
+ AliSysInfo::AddStamp(Form("start_event_%d",ievent), ievent,-1,-1);
printf("Reading next event ... Nr: %d\n",ievent);
- AliTPCRawStream rawStream(rawReader);
+ AliTPCRawStream *rawStream = new AliTPCRawStream(rawReader);
rawReader->Select("TPC");
- ProcessRawEvent(&rawStream, nameFileOut);
+ ProcessRawEvent(rawStream, nameFileOut);
+ delete rawStream;
+ AliSysInfo::AddStamp(Form("end_event_%d",ievent), ievent,-1,-1);
ievent++;
- }
+ } while (rawReader->NextEvent());
rawReader->~AliRawReader();
}
+//_____________________________________________________________________________
+void AliTPCCalibTCF::ProcessRawEventV3( AliRawReader *rawReader, AliTPCRawStreamV3 *rawStream, const char *nameFileOut) {
+ //
+ // New RCU data format!: Standard middle of 2009
+ //
+ // Extracts proper pulses (according the given tresholds) within one event
+ // and accumulates them into one histogram per pad. All histograms are
+ // saved in the file 'nameFileOut'.
+ // The first bins of the histograms contain the following information:
+ // bin 1: Number of accumulated pulses
+ // bin 2;3;4: Sector; Row; Pad;
+ //
+
+ TFile fileOut(nameFileOut,"UPDATE");
+ fileOut.cd();
+
+ TH1I *tempHis = new TH1I("tempHis","tempHis",fSample,fGateWidth,fSample+fGateWidth);
+ TH1I *tempRMSHis = new TH1I("tempRMSHis","tempRMSHis",2000,0,2000);
+
+ // loop over the data in this event
+
+ while (rawStream->NextDDL() ) {
+
+ Int_t ddl = rawReader->GetDDLID();
+
+ while (rawStream->NextChannel() ) {
+
+ while (rawStream->NextBunch() ) {
+
+ Int_t t0 = rawStream->GetStartTimeBin();
+ Int_t bl = rawStream->GetBunchLength();
+
+ if (bl<fSample+fGateWidth) continue;
+
+ Int_t sector = rawStream->GetSector();
+ Int_t row = rawStream->GetRow();
+ Int_t pad = rawStream->GetPad();
+
+ UShort_t *signals=(UShort_t*)rawStream->GetSignals();
+ if (!signals) continue;
+
+ // Write to temporary histogramm
+ for (Int_t i=0;i<bl;++i) {
+ UShort_t time=t0-i;
+ UShort_t signal=signals[i];
+ if ( (fGateWidth<time) && (time<=fSample+fGateWidth) ) {
+ tempHis->SetBinContent(time-fGateWidth,signal);
+ }
+ }
+
+ // calculation of the pulse properties and comparison to thresholds settings
+
+ Int_t max = (Int_t)tempHis->GetMaximum(FLT_MAX);
+ Int_t maxpos = tempHis->GetMaximumBin();
+
+ Int_t first = (Int_t)TMath::Max(maxpos-10, 0);
+ Int_t last = TMath::Min((Int_t)maxpos+fPulseLength-10, fSample+fGateWidth);
+
+ // simple baseline substraction ? better one needed ? (pedestalsubstr.?)
+ // and RMS calculation with timebins before the pulse and at the end of
+ // the signal
+ for (Int_t ipos = 0; ipos<6; ipos++) {
+ // before the pulse
+ tempRMSHis->Fill(tempHis->GetBinContent(first+ipos));
+ }
+ for (Int_t ipos = 0; ipos<20; ipos++) {
+ // at the end to get rid of pulses with serious baseline fluctuations
+ tempRMSHis->Fill(tempHis->GetBinContent(last-ipos));
+ }
+
+ Double_t baseline = tempRMSHis->GetMean();
+ Double_t rms = tempRMSHis->GetRMS();
+ tempRMSHis->Reset();
+
+ Double_t lowLim = fLowPulseLim+baseline;
+ Double_t upLim = fUpPulseLim+baseline;
+
+ // get rid of pulses which contain gate signal and/or too much noise
+ // with the help of ratio of integrals
+ Double_t intHist = 0;
+ Double_t intPulse = 0;
+ Double_t binValue;
+ for(Int_t ipos=first; ipos<=last; ipos++) {
+ binValue = TMath::Abs(tempHis->GetBinContent(ipos) - baseline);
+ intHist += binValue;
+ if(ipos>=first+5 && ipos<=first+15) {intPulse += binValue;}
+ }
+
+ // gets rid of high frequency noise:
+ // calculating ratio (value one to the right of maximum)/(maximum)
+ // has to be >= 0.1; if maximum==0 set ratio to 0.1
+ Double_t maxCorr = max - baseline;
+ Double_t binRatio = 0.1;
+ if(TMath::Abs(maxCorr)>1e-5) {
+ binRatio = (tempHis->GetBinContent(maxpos+1) - baseline) / maxCorr;
+ }
+
+ // Decision if found pulse is a proper one according to given tresholds
+ if (max>lowLim && max<upLim && !((last-first)<fPulseLength) && rms<fRMSLim && (intHist/intPulse)<fRatioIntLim &&intPulse>10&& (binRatio >= 0.1) ) {
+
+ // 1D histogramm for mean pulse per pad
+ char hname[100];
+ snprintf(hname,100,"sec%drow%dpad%d",sector,row,pad);
+
+ TH1F *his = (TH1F*)fileOut.Get(hname);
+
+ if (!his ) { // new entry (pulse in new pad found)
+
+ his = new TH1F(hname,hname, fPulseLength+5, 0, fPulseLength+5);
+ his->SetBinContent(1,1); // pulse counter (1st pulse)
+ his->SetBinContent(2,sector); // sector
+ his->SetBinContent(3,row); // row
+ his->SetBinContent(4,pad); // pad
+
+ for (Int_t ipos=0; ipos<last-first; ipos++){
+ Int_t signal = (Int_t)(tempHis->GetBinContent(ipos+first)-baseline);
+ his->SetBinContent(ipos+5,signal);
+ }
+ his->Write(hname);
+ printf("new %s: Signal %d at bin %d \n", hname, max-(Int_t)baseline, maxpos+fGateWidth);
+
+ } else { // adding pulse to existing histogram (pad already found)
+
+ his->AddBinContent(1,1); // pulse counter for each pad
+ for (Int_t ipos=0; ipos<last-first; ipos++){
+ Int_t signal= (Int_t)(tempHis->GetBinContent(ipos+first)-baseline);
+ his->AddBinContent(ipos+5,signal);
+ }
+ printf("adding ... %s: Signal %d at bin %d \n", hname, max-(Int_t)baseline, maxpos+fGateWidth);
+ his->Write(hname,kOverwrite);
+ }
+
+
+ // 2D histogramm for pulse spread within a DDL (normalized to one)
+ char hname2d[100];
+ snprintf(hname2d,100,"2Dhisto_ddl%d",ddl);
+ TH2F *his2d = (TH2F*)fileOut.Get(hname2d);
+ if (!his2d ) { // new entry (ddl was not seen before)
+
+ his2d = new TH2F(hname2d,hname2d, fPulseLength, 0., (Double_t)fPulseLength, 50,-0.02,0.02);
+ for (Int_t ipos=0; ipos<last-first; ipos++){
+ Double_t signal = tempHis->GetBinContent(ipos+first)-baseline;
+ if (TMath::Abs(signal/maxCorr)>1e-10) // zero bins are biased
+ his2d->Fill(ipos,signal/maxCorr);
+ }
+ his2d->Write(hname2d);
+ printf("new %s: \n", hname2d);
+ } else { // adding pulse to existing histogram
+
+ for (Int_t ipos=0; ipos<last-first; ipos++){
+ Double_t signal= tempHis->GetBinContent(ipos+first)-baseline;
+ if (TMath::Abs(signal/maxCorr)>1e-10) // zero bins are biased
+ his2d->Fill(ipos,signal/maxCorr);
+ }
+ his2d->Write(hname2d,kOverwrite);
+ }
+
+ tempHis->Reset();
+
+ } // pulse stored
+
+ } // bunch loop
+ }// channel loop
+ } // ddl loop
+
+ tempHis->~TH1I();
+ tempRMSHis->~TH1I();
+ printf("Finished to read event ... \n");
+ fileOut.Close();
+
+}
+
+
//_____________________________________________________________________________
void AliTPCCalibTCF::ProcessRawEvent(AliTPCRawStream *rawStream, const char *nameFileOut) {
//
// bin 2;3;4: Sector; Row; Pad;
//
+ rawStream->Reset();
+
Int_t sector = rawStream->GetSector();
Int_t row = rawStream->GetRow();
TH1I *tempHis = new TH1I("tempHis","tempHis",fSample+fGateWidth,fGateWidth,fSample+fGateWidth);
TH1I *tempRMSHis = new TH1I("tempRMSHis","tempRMSHis",2000,0,2000);
+ // printf("raw next: %d\n",rawStream->Next());
+
while (rawStream->Next()) {
// in case of a new row, get sector and row number
if (rawStream->IsNewRow()){
sector = rawStream->GetSector();
row = rawStream->GetRow();
+ // if (sector!=prevSec) AliSysInfo::AddStamp(Form("sector_%d_row_%d",sector,row), -1,sector,row);
}
Int_t pad = rawStream->GetPad();
Int_t time = rawStream->GetTime();
Int_t signal = rawStream->GetSignal();
+
+ //printf("%d: t:%d sig:%d\n",pad,time,signal);
// Reading signal from one Pad
if (!rawStream->IsNewPad()) {
}
if (time>prevTime) {
- printf("Wrong time: %d %d\n",rawStream->GetTime(),prevTime);
+ //printf("Wrong time: %d %d\n",rawStream->GetTime(),prevTime);
continue;
} else {
// still the same pad, save signal to temporary histogram
- if (time<=fSample+fGateWidth && time>fGateWidth) {
+ if ( (time<=fSample+fGateWidth) && (time>=fGateWidth)) {
tempHis->SetBinContent(time,signal);
}
}
// complete pulse found and stored into tempHis, now calculation
// of the properties and comparison to given thresholds
-
+
Int_t max = (Int_t)tempHis->GetMaximum(FLT_MAX);
Int_t maxpos = tempHis->GetMaximumBin();
Int_t first = (Int_t)TMath::Max(maxpos-10, 0);
- Int_t last = TMath::Min((Int_t)maxpos+fPulseLength-10, fSample);
+ Int_t last = TMath::Min((Int_t)maxpos+fPulseLength-10, fSample+fGateWidth);
// simple baseline substraction ? better one needed ? (pedestalsubstr.?)
// and RMS calculation with timebins before the pulse and at the end of
// has to be >= 0.1; if maximum==0 set ratio to 0.1
Double_t maxCorr = max - baseline;
Double_t binRatio = 0.1;
- if(maxCorr != 0) {
+ if(TMath::Abs(maxCorr)>1e-5) {
binRatio = (tempHis->GetBinContent(maxpos+1) - baseline) / maxCorr;
}
// Decision if found pulse is a proper one according to given tresholds
- if (max>lowLim && max<upLim && !((last-first)<fPulseLength) && rms<fRMSLim && (intHist/intPulse)<fRatioIntLim && binRatio >= 0.1) {
+ if (max>lowLim && max<upLim && !((last-first)<fPulseLength) && rms<fRMSLim && (intHist/intPulse)<fRatioIntLim && (binRatio >= 0.1) ) {
char hname[100];
- sprintf(hname,"sec%drow%dpad%d",prevSec,prevRow,prevPad);
+ snprintf(hname,100,"sec%drow%dpad%d",prevSec,prevRow,prevPad);
TH1F *his = (TH1F*)fileOut.Get(hname);
if (!his ) { // new entry (pulse in new pad found)
his = new TH1F(hname,hname, fPulseLength+4, 0, fPulseLength+4);
- his->SetBinContent(1,1); // pulse counter (1st pulse)
+ his->SetBinContent(1,1); // pulse counter (1st pulse)
his->SetBinContent(2,prevSec); // sector
his->SetBinContent(3,prevRow); // row
his->SetBinContent(4,prevPad); // pad
for (Int_t ipos=0; ipos<last-first; ipos++){
- Int_t signal = (Int_t)(tempHis->GetBinContent(ipos+first)-baseline);
+ signal = (Int_t)(tempHis->GetBinContent(ipos+first)-baseline);
his->SetBinContent(ipos+5,signal);
}
his->Write(hname);
his->AddBinContent(1,1); // pulse counter for each pad
for (Int_t ipos=0; ipos<last-first; ipos++){
- Int_t signal= (Int_t)(tempHis->GetBinContent(ipos+first)-baseline);
+ signal= (Int_t)(tempHis->GetBinContent(ipos+first)-baseline);
his->AddBinContent(ipos+5,signal);
}
printf("adding ... %s: Signal %d at bin %d \n", hname, max-(Int_t)baseline, maxpos+fGateWidth);
TIter next( fileIn.GetListOfKeys() );
char nameFileOut[100];
- sprintf(nameFileOut,"Sec-%s",nameFileIn);
+ snprintf(nameFileOut,100,"Sec-%s",nameFileIn);
TFile fileOut(nameFileOut,"RECREATE");
fileOut.cd();
while ( (key=(TKey*)next()) ) {
iHist++;
+ TString name(key->GetName());
+ if (name.Contains("ddl") ) continue; // ignore the 2d histogramms per ddl
+
+ hisPad = (TH1F*)fileIn.Get(name.Data()); // copy object to memory
- hisPad = (TH1F*)fileIn.Get(key->GetName()); // copy object to memory
Int_t pulseLength = hisPad->GetNbinsX() -4;
// -4 because first four timebins contain pad specific informations
Int_t npulse = (Int_t)hisPad->GetBinContent(1);
Int_t sector = (Int_t)hisPad->GetBinContent(2);
char hname[100];
- sprintf(hname,"sector%d",sector);
+ snprintf(hname,100,"sector%d",sector);
TH1F *his = (TH1F*)fileOut.Get(hname);
if (!his ) { // new histogram (new sector)
for (Int_t ipos=0; ipos<pulseLength; ipos++){
his->AddBinContent(ipos+5,hisPad->GetBinContent(ipos+5));
}
- his->Write(hname,kOverwrite);
+ his->Write(hname,kOverwrite);
}
if (iHist%500==0) {
TIter next( fileIn.GetListOfKeys() );
char nameFileOut[100];
- sprintf(nameFileOut,"TCF-%s",nameFileIn);
+ snprintf(nameFileOut,100,"TCF-%s",nameFileIn);
TFile fileOut(nameFileOut,"RECREATE");
fileOut.cd();
while ((key = (TKey *) next())) { // loop over histograms
++iHist;
if(iHist < histStart || iHist > histEnd) {continue;}
-
- hisIn = (TH1F*)fileIn.Get(key->GetName()); // copy object to memory
+ TString name(key->GetName());
+ if (name.Contains("ddl") ) continue; // ignore the 2d histogramms per ddl
+
+ hisIn = (TH1F*)fileIn.Get(key->GetName()); // copy object to memory
+
Int_t numPulse = (Int_t)hisIn->GetBinContent(1);
if ( numPulse >= minNumPulse ) {
printf("Analyze histogram %d out of %d\n",iHist,nHist);
//____________________________________________________________________________
-Int_t AliTPCCalibTCF::AnalyzePulse(TH1F *hisIn, Double_t *coefZ, Double_t *coefP) {
+Int_t AliTPCCalibTCF::AnalyzePulse(TH1F * const hisIn, Double_t *coefZ, Double_t *coefP) {
//
// Performs the analysis on one specific pulse (histogram) by means of fitting
// the pulse and equalization of the pulseheight. The found TCF parameters
}
char nameFileOut[100];
- sprintf(nameFileOut,"Quality_%s_AT_%s",nameFileTCF, nameFileIn);
+ snprintf(nameFileOut,100,"Quality_%s_AT_%s",nameFileTCF, nameFileIn);
TFile fileOut(nameFileOut,"RECREATE");
TNtuple *qualityTuple = new TNtuple("TCFquality","TCF quality Values","sec:row:pad:npulse:heightDev:areaRed:widthRed:undershot:maxUndershot");
while ((key = (TKey *) next())) { // loop over saved histograms
// loading pulse to memory;
+ TString name(key->GetName());
+ if (name.Contains("ddl") ) continue; // ignore the 2d histogramms per ddl
+
printf("validating pulse %d out of %d\n",++iHist,nHist);
hisIn = (TH1F*)fileIn.Get(key->GetName());
+
// find the correct TCF parameter according to the his infos (first 4 bins)
Int_t nPulse = FindCorTCFparam(hisIn, nameFileTCF, coefZ, coefP);
//_____________________________________________________________________________
-void AliTPCCalibTCF::TestTCFonRawFile(const char *nameRawFile, const char *nameFileOut, const char *nameFileTCF, Int_t minNumPulse, Int_t plotFlag) {
+void AliTPCCalibTCF::TestTCFonRawFile(const char *nameRawFile, const char *nameFileOut, const char *nameFileTCF, Int_t minNumPulse, Int_t plotFlag, bool bUseHLTOUT) {
//
// Performs quality parameters evaluation of the calculated TCF parameters in
// the file 'nameFileTCF' for every proper pulse (according to given thresholds)
// and test the found TCF parameters on them ...
//
+
+ // create the data reader
AliRawReader *rawReader = new AliRawReaderRoot(nameRawFile);
- rawReader->Reset();
-
+ if (!rawReader) {
+ return;
+ }
+
+ // create HLT reader for redirection of TPC data from HLTOUT to TPC reconstruction
+ AliRawReader *hltReader=AliRawHLTManager::AliRawHLTManager::CreateRawReaderHLT(rawReader, "TPC");
+
+ // now choose the data source
+ if (bUseHLTOUT) rawReader=hltReader;
+
+ // rawReader->Reset();
+ rawReader->RewindEvents();
+
+ if (!rawReader->NextEvent()) {
+ printf("no events found in %s\n",nameRawFile);
+ return;
+ }
+
Double_t* coefP = new Double_t[3];
Double_t* coefZ = new Double_t[3];
for(Int_t i = 0; i < 3; i++){
qualityTuple = new TNtuple("TCFquality","TCF quality Values","sec:row:pad:npulse:heightDev:areaRed:widthRed:undershot:maxUndershot:pulseRMS");
}
- while ( rawReader->NextEvent() ){
+ do {
printf("Reading next event ... Nr:%d\n",ievent);
- AliTPCRawStream rawStream(rawReader);
+ AliTPCRawStream *rawStream = new AliTPCRawStream(rawReader);
rawReader->Select("TPC");
ievent++;
- Int_t sector = rawStream.GetSector();
- Int_t row = rawStream.GetRow();
+ Int_t sector = rawStream->GetSector();
+ Int_t row = rawStream->GetRow();
Int_t prevSec = 999999;
Int_t prevRow = 999999;
Int_t prevPad = 999999;
Int_t prevTime = 999999;
- while (rawStream.Next()) {
+ while (rawStream->Next()) {
- if (rawStream.IsNewRow()){
- sector = rawStream.GetSector();
- row = rawStream.GetRow();
+ if (rawStream->IsNewRow()){
+ sector = rawStream->GetSector();
+ row = rawStream->GetRow();
}
- Int_t pad = rawStream.GetPad();
- Int_t time = rawStream.GetTime();
- Int_t signal = rawStream.GetSignal();
+ Int_t pad = rawStream->GetPad();
+ Int_t time = rawStream->GetTime();
+ Int_t signal = rawStream->GetSignal();
- if (!rawStream.IsNewPad()) { // Reading signal from one Pad
+ if (!rawStream->IsNewPad()) { // Reading signal from one Pad
// this pad always gave a useless signal, probably induced by the supply
// voltage of the gate signal (date:2008-Aug-07)
}
if (time>prevTime) {
- printf("Wrong time: %d %d\n",rawStream.GetTime(),prevTime);
+ // printf("Wrong time: %d %d\n",rawStream->GetTime(),prevTime);
continue;
} else {
// still the same pad, save signal to temporary histogram
Int_t maxpos = tempHis->GetMaximumBin();
Int_t first = (Int_t)TMath::Max(maxpos-10, 0);
- Int_t last = TMath::Min((Int_t)maxpos+fPulseLength-10, fSample);
+ Int_t last = TMath::Min((Int_t)maxpos+fPulseLength-10, fSample+fGateWidth);
// simple baseline substraction ? better one needed ? (pedestalsubstr.?)
for(Int_t ipos=first; ipos<=last; ipos++) {
binValue = TMath::Abs(tempHis->GetBinContent(ipos) - baseline);
intHist += binValue;
- if(ipos>=first+5 && ipos<=first+25) {intPulse += binValue;}
+ if(ipos>=first+5 && ipos<=first+15) {intPulse += binValue;}
}
// gets rid of high frequency noise:
// has to be >= 0.1; if maximum==0 set ratio to 0.1
Double_t maxCorr = max - baseline;
Double_t binRatio = 0.1;
- if(maxCorr != 0) {
+ if(TMath::Abs(maxCorr) > 1e-5 ) {
binRatio = (tempHis->GetBinContent(maxpos+1) - baseline) / maxCorr;
}
// Decision if found pulse is a proper one according to given tresholds
- if (max>lowLim && max<upLim && !((last-first)<fPulseLength) && rms<fRMSLim && intHist/intPulse<fRatioIntLim && binRatio >= 0.1){
+ if (max>lowLim && max<upLim && !((last-first)<fPulseLength) && rms<fRMSLim && intHist/intPulse<fRatioIntLim && (binRatio >= 0.1) ){
// note:
// assuming that lowLim is higher than the pedestal value!
char hname[100];
- sprintf(hname,"sec%drow%dpad%d",prevSec,prevRow,prevPad);
+ snprintf(hname,100,"sec%drow%dpad%d",prevSec,prevRow,prevPad);
TH1F *his = new TH1F(hname,hname, fPulseLength+4, 0, fPulseLength+4);
his->SetBinContent(1,1); // pulse counter (1st pulse)
his->SetBinContent(2,prevSec); // sector
his->SetBinContent(4,prevPad); // pad
for (Int_t ipos=0; ipos<last-first; ipos++){
- Int_t signal = (Int_t)(tempHis->GetBinContent(ipos+first)-baseline);
+ signal = (Int_t)(tempHis->GetBinContent(ipos+first)-baseline);
his->SetBinContent(ipos+5,signal);
}
printf("Finished to read event ... \n");
- } // event loop
+ delete rawStream;
+
+
+ } while (rawReader->NextEvent()); // event loop
printf("Finished to read file - close output file ... \n");
TIter next(fileIn.GetListOfKeys());
TH2F * his2D = new TH2F("his2D","his2D", 250,-250,250,250,-250,250);
+
AliTPCROC * roc = AliTPCROC::Instance();
Int_t nHist=fileIn.GetNkeys();
+ if (!nHist) { return 0; }
+
Int_t iHist = 0;
Float_t xyz[3];
Int_t pad = 0;
while ((key = (TKey *) next())) { // loop over histograms within the file
- iHist+=1;
+ iHist++;
+
+ TString name(key->GetName());
+ if (name.Contains("ddl") ) continue; // ignore the 2d histogramms per ddl
+
his = (TH1F*)fileIn.Get(key->GetName()); // copy object to memory
npulse = (Int_t)his->GetBinContent(1);
row = (Int_t)his->GetBinContent(3);
pad = (Int_t)his->GetBinContent(4);
- if (side==0 && sec%36>=18) continue;
- if (side>0 && sec%36<18) continue;
+ if ( (side==0) && (sec%36>=18) ) continue;
+ if ( (side>0) && (sec%36<18) ) continue;
- if (row==-1 & pad==-1) { // summed pulses per sector
+ if ( (row<0) && (pad<0) ) { // row and pad are equal to -1, then -> summed pulses per sector
// fill all pad with this values
- for (UInt_t row=0; row<roc->GetNRows(sec); row++) {
- for (UInt_t pad=0; pad<roc->GetNPads(sec,row); pad++) {
- roc->GetPositionGlobal(sec,row,pad,xyz);
+ for (UInt_t rowi=0; rowi<roc->GetNRows(sec); rowi++) {
+ for (UInt_t padi=0; padi<roc->GetNPads(sec,rowi); padi++) {
+ roc->GetPositionGlobal(sec,rowi,padi,xyz);
binx = 1+TMath::Nint((xyz[0]+250.)*0.5);
biny = 1+TMath::Nint((xyz[1]+250.)*0.5);
his2D->SetBinContent(binx,biny,npulse);
}
his2D->SetXTitle("x (cm)");
his2D->SetYTitle("y (cm)");
+ his2D->SetStats(0);
+
+ his2D->DrawCopy("colz");
if (!side) {
gPad->SetTitle("A side");
gPad->SetTitle("C side");
}
- his2D->DrawCopy("colz");
return his2D;
}
//
TFile *file = new TFile(nameFile,"READ");
-
TH1F *his;
TKey *key;
TIter next( file->GetListOfKeys() );
char nameFileOut[100];
- sprintf(nameFileOut,"Occup-%s",nameFile);
+ snprintf(nameFileOut,100,"Occup-%s",nameFile);
TFile fileOut(nameFileOut,"RECREATE");
- fileOut.cd();
+ // fileOut.cd();
TNtuple *ntuple = new TNtuple("ntuple","ntuple","x:y:z:npulse");
- // ntuple->SetDirectory(0); // force to be memory resistent
+ // ntuple->SetDirectory(0); // force to be memory resistent
Int_t nHist=file->GetNkeys();
+ if (!nHist) { return; }
Int_t iHist = 0;
+
+ Int_t secWise = 0;
+
while ((key = (TKey *) next())) { // loop over histograms within the file
- iHist+=1;
- his = (TH1F*)file->Get(key->GetName()); // copy object to memory
+
+ TString name(key->GetName());
+ if (name.Contains("ddl") ) continue; // ignore the 2d histogramms per ddl
+ his = (TH1F*)file->Get(key->GetName()); // copy object to memory
+ iHist++;
Int_t npulse = (Int_t)his->GetBinContent(1);
Int_t sec = (Int_t)his->GetBinContent(2);
Int_t row = (Int_t)his->GetBinContent(3);
Int_t pad = (Int_t)his->GetBinContent(4);
- // if (side==0 && sec%36>=18) continue;
- // if (side>0 && sec%36<18) continue;
-
- if (row==-1 & pad==-1) { // summed pulses per sector
+ if ( (row<0) && (pad<0) ) { // row and pad are equal to -1, then -> summed pulses per sector
row = 40; pad = 40; // set to approx middle row for better plot
+ secWise=1;
}
Float_t *pos = new Float_t[3];
}
pos->~Float_t();
}
-
- if (iHist<72) { // pulse per sector
+ if (secWise) { // pulse per sector
ntuple->SetMarkerStyle(8);
ntuple->SetMarkerSize(4);
} else { // pulse per Pad
char cSel[100];
if (!side) {
- sprintf(cSel,"z>0&&npulse>=%d",nPulseMin);
+ snprintf(cSel,100,"z>0&&npulse>=%d",nPulseMin);
ntuple->Draw("y:x:npulse",cSel,"colz");
- gPad->SetTitle("A side");
} else {
- sprintf(cSel,"z<0&&npulse>=%d",nPulseMin);
+ snprintf(cSel,100,"z<0&&npulse>=%d",nPulseMin);
ntuple->Draw("y:x:npulse",cSel,"colz");
+ }
+
+ if (!side) {
+ gPad->SetTitle("A side");
+ } else {
gPad->SetTitle("C side");
}
+
ntuple->Write();
fileOut.Close();
file->Close();
TH2F *his2D = new TH2F(plotSpec,nameFileQuality,11,-10,1,25,1,100);
char plSpec[100];
- sprintf(plSpec,"%s>>%s",plotSpec,plotSpec);
+ snprintf(plSpec,100,"%s>>%s",plotSpec,plotSpec);
qualityTuple->Draw(plSpec,cut,pOpt);
gStyle->SetLabelSize(0.03,"X");
gStyle->SetLabelOffset(-0.01,"Y");
gStyle->SetLabelOffset(-0.03,"Z");
- gPad->SetPhi(0.1);gPad->SetTheta(90);
-
his2D->GetXaxis()->SetTitle("max. undershot [ADC]");
his2D->GetYaxis()->SetTitle("width Reduction [%]");
his2D->DrawCopy(pOpt);
+
+ gPad->SetPhi(0.1);gPad->SetTheta(90);
his2D->~TH2F();
//
// initialize TMinuit with a maximum of 8 params
- TMinuit *gMinuit = new
- TMinuit(8);
- gMinuit->mncler(); // Reset Minuit's list of paramters
- gMinuit->SetPrintLevel(-1); // No Printout
- gMinuit->SetFCN(AliTPCCalibTCF::FitFcn); // To set the address of the
+ TMinuit *minuitFit = new TMinuit(8);
+ minuitFit->mncler(); // Reset Minuit's list of paramters
+ minuitFit->SetPrintLevel(-1); // No Printout
+ minuitFit->SetFCN(AliTPCCalibTCF::FitFcn); // To set the address of the
// minimization function
- gMinuit->SetObjectFit(dataTuple);
+ minuitFit->SetObjectFit(dataTuple);
Double_t arglist[10];
Int_t ierflg = 0;
arglist[0] = 1;
- gMinuit->mnexcm("SET ERR", arglist ,1,ierflg);
+ minuitFit->mnexcm("SET ERR", arglist ,1,ierflg);
// Set standard starting values and step sizes for each parameter
// upper and lower limit (in a reasonable range) are set to improve
static Double_t min[8] = {100, 3., 0.1, 0.2, 3., 60., 0., 2.0};
static Double_t max[8] = {200, 20., 5., 3., 30., 300., 20., 2.5};
- gMinuit->mnparm(0, "A1", vstart[0], step[0], min[0], max[0], ierflg);
- gMinuit->mnparm(1, "A2", vstart[1], step[1], min[1], max[1], ierflg);
- gMinuit->mnparm(2, "A3", vstart[2], step[2], min[2], max[2], ierflg);
- gMinuit->mnparm(3, "T1", vstart[3], step[3], min[3], max[3], ierflg);
- gMinuit->mnparm(4, "T2", vstart[4], step[4], min[4], max[4], ierflg);
- gMinuit->mnparm(5, "T3", vstart[5], step[5], min[5], max[5], ierflg);
- gMinuit->mnparm(6, "T0", vstart[6], step[6], min[6], max[6], ierflg);
- gMinuit->mnparm(7, "TTP", vstart[7], step[7], min[7], max[7],ierflg);
- gMinuit->FixParameter(7); // 2.24 ... out of pulserRun Fit (->IRF)
+ minuitFit->mnparm(0, "A1", vstart[0], step[0], min[0], max[0], ierflg);
+ minuitFit->mnparm(1, "A2", vstart[1], step[1], min[1], max[1], ierflg);
+ minuitFit->mnparm(2, "A3", vstart[2], step[2], min[2], max[2], ierflg);
+ minuitFit->mnparm(3, "T1", vstart[3], step[3], min[3], max[3], ierflg);
+ minuitFit->mnparm(4, "T2", vstart[4], step[4], min[4], max[4], ierflg);
+ minuitFit->mnparm(5, "T3", vstart[5], step[5], min[5], max[5], ierflg);
+ minuitFit->mnparm(6, "T0", vstart[6], step[6], min[6], max[6], ierflg);
+ minuitFit->mnparm(7, "TTP", vstart[7], step[7], min[7], max[7],ierflg);
+ minuitFit->FixParameter(7); // 2.24 ... out of pulserRun Fit (->IRF)
// Now ready for minimization step
arglist[0] = 2000; // max num of iterations
arglist[1] = 0.1; // tolerance
- gMinuit->mnexcm("MIGRAD", arglist ,2,ierflg);
+ minuitFit->mnexcm("MIGRAD", arglist ,2,ierflg);
Double_t p1 = 0.0 ;
- gMinuit->mnexcm("SET NOW", &p1 , 0, ierflg) ; // No Warnings
+ minuitFit->mnexcm("SET NOW", &p1 , 0, ierflg) ; // No Warnings
if (ierflg == 4) { // Fit failed
for (Int_t i=0;i<3;i++) {
coefP[i] = 0;
coefZ[i] = 0;
}
- gMinuit->~TMinuit();
+ minuitFit->~TMinuit();
return 0;
} else { // Fit successfull
for (Int_t i=0;i<6;i++) {
Double_t err = 0;
Double_t val = 0;
- gMinuit->GetParameter(i,val,err);
+ minuitFit->GetParameter(i,val,err);
fitParam[i] = val;
}
fitParam->~Double_t();
valuePZ->~Double_t();
- gMinuit->~TMinuit();
+ minuitFit->~TMinuit();
return 1;
//____________________________________________________________________________
-void AliTPCCalibTCF::FitFcn(Int_t &/*nPar*/, Double_t */*grad*/, Double_t &f, Double_t *par, Int_t /*iflag*/)
+void AliTPCCalibTCF::FitFcn(Int_t &/*nPar*/, Double_t */*grad*/, Double_t &f, Double_t * const par, Int_t /*iflag*/)
{
//
// Minimization function needed for TMinuit with FitFunction included
// to the different stages of the TCF filter
// (e.g. first 2 fit parameters represent the electron signal itself!)
- if (param[3]==param[4]) {param[3]=param[3]+0.0001;}
- if (param[5]==param[4]) {param[5]=param[5]+0.0001;}
+ if ((param[3]-param[4]) <1e-5 ) {param[3]=param[3]+0.0001;} // if equal
+ if ((param[5]-param[4]) <1e-5 ) {param[5]=param[5]+0.0001;} // if equal
- if ((param[5]>param[4])&(param[5]>param[3])) {
+ if ((param[5]>param[4])&&(param[5]>param[3])) {
if (param[4]>=param[3]) {
vA1 = param[0]; vA2 = param[1]; vA3 = param[2];
vTT1 = param[3]; vTT2 = param[4]; vTT3 = param[5];
vA1 = param[1]; vA2 = param[0]; vA3 = param[2];
vTT1 = param[4]; vTT2 = param[3]; vTT3 = param[5];
}
- } else if ((param[4]>param[5])&(param[4]>param[3])) {
+ } else if ((param[4]>param[5])&&(param[4]>param[3])) {
if (param[5]>=param[3]) {
vA1 = param[0]; vA2 = param[2]; vA3 = param[1];
vTT1 = param[3]; vTT2 = param[5]; vTT3 = param[4];
vA1 = param[2]; vA2 = param[0]; vA3 = param[1];
vTT1 = param[5]; vTT2 = param[3]; vTT3 = param[4];
}
- } else if ((param[3]>param[4])&(param[3]>param[5])) {
+ } else if ((param[3]>param[4])&&(param[3]>param[5])) {
if (param[5]>=param[4]) {
vA1 = param[1]; vA2 = param[2]; vA3 = param[0];
vTT1 = param[4]; vTT2 = param[5]; vTT3 = param[3];
// order to restore the original pulse height and adds them to the passed arrays
//
- Double_t *s0 = new Double_t[1000]; // original pulse
- Double_t *s1 = new Double_t[1000]; // pulse after 1st PZ filter
- Double_t *s2 = new Double_t[1000]; // pulse after 2nd PZ filter
-
const Int_t kPulseLength = dataTuple->GetEntries();
-
+
+ if (kPulseLength<2) {
+ // prinft("PulseLength does not make sense\n");
+ return 0;
+ }
+
+ Double_t *s0 = new Double_t[kPulseLength]; // original pulse
+ Double_t *s1 = new Double_t[kPulseLength]; // pulse after 1st PZ filter
+ Double_t *s2 = new Double_t[kPulseLength]; // pulse after 2nd PZ filter
+
for (Int_t ipos=0; ipos<kPulseLength; ipos++) {
dataTuple->GetEntry(ipos);
Float_t *p = dataTuple->GetArgs();
coefZ[2] = 0;
}
- s0->~Double_t();
- s1->~Double_t();
- s2->~Double_t();
+ delete [] s0;
+ delete [] s1;
+ delete [] s2;
// if equalization out of range (<0 or >=1) it failed!
// if ratio of amplitudes of fittet to original pulse < 0.9 it failed!
//____________________________________________________________________________
-Int_t AliTPCCalibTCF::FindCorTCFparam(TH1F *hisIn, const char *nameFileTCF, Double_t *coefZ, Double_t *coefP) {
+Int_t AliTPCCalibTCF::FindCorTCFparam(TH1F * const hisIn, const char *nameFileTCF, Double_t *coefZ, Double_t *coefP) {
//
// This function searches for the correct TCF parameters to the given
// histogram 'hisIn' within the file 'nameFileTCF'
char sel[100];
if ( paramTuple->GetEntries("row==-1&&pad==-1") ) {
// parameters per SECTOR
- sprintf(sel,"sec==%d&&row==-1&&pad==-1",sector);
+ snprintf(sel,100,"sec==%d&&row==-1&&pad==-1",sector);
} else {
// parameters per PAD
- sprintf(sel,"sec==%d&&row==%d&&pad==%d",sector,row,pad);
+ snprintf(sel,100,"sec==%d&&row==%d&&pad==%d",sector,row,pad);
}
// list should contain just ONE entry! ... otherwise there is a mistake!
paramTuple->GetEntry(pos); // get specific TCF parameters
Float_t *p = paramTuple->GetArgs();
// check ...
- if(sector==p[0]) {printf("sector ok ... "); }
- if(row==p[1]) {printf("row ok ... "); }
- if(pad==p[2]) {printf("pad ok ... \n"); }
+ if((sector-p[0])<1e-5) {printf("sector ok ... "); }
+ if((row-p[1])<1e-5) {printf("row ok ... "); }
+ if((pad-p[2])<1e-5) {printf("pad ok ... \n"); }
// number of averaged pulses used to produce TCF params
nPulse = (Int_t)p[3];
}
// Search for maximal undershot (is equal to minimum after the pulse)
- if ( (undershotStart==1)&&(i<(posOfStartTCF+widthTCF+20)) ) {
+ if ( ((undershotStart-1)<1e-7)&&(i<(posOfStartTCF+widthTCF+20)) ) {
if (maxUndershot>sigTCF) { maxUndershot = sigTCF; }
}
for (Int_t ipos = 0; ipos<6; ipos++) {
// before the pulse
tempRMSHis->Fill(hisIn->GetBinContent(ipos+5));
- // at the end
+ // at the end
tempRMSHis->Fill(hisIn->GetBinContent(hisIn->GetNbinsX()-ipos));
}
Double_t pulseRMS = tempRMSHis->GetRMS();
printf("width reduction [percent]:\t\t %3.1f\n", widthReduct);
printf("mean undershot [ADC]:\t\t\t %3.1f\n", undershot);
printf("maximum of undershot after pulse [ADC]: %3.1f\n", maxUndershot);
- printf("RMS of the original pulse [ADC]: \t %3.2f\n\n", pulseRMS);
+ printf("RMS of the original (or summed) pulse [ADC]: \t %3.2f\n\n", pulseRMS);
}
//____________________________________________________________________________
-TNtuple *AliTPCCalibTCF::ApplyTCFilter(TH1F *hisIn, Double_t *coefZ, Double_t *coefP, Int_t plotFlag) {
+TNtuple *AliTPCCalibTCF::ApplyTCFilter(TH1F * const hisIn, Double_t * const coefZ, Double_t * const coefP, Int_t plotFlag) {
//
// Applies the given TCF parameters on the given pulse via the ALTRO emulator
// class (discret values) and stores both pulses into a returned TNtuple
}
// transform TCF parameters into ALTRO readable format (Integer)
- Int_t* valK = new Int_t[3];
- Int_t* valL = new Int_t[3];
+ Int_t valK[3];
+ Int_t valL[3];
for (Int_t i=0; i<3; i++) {
valK[i] = (Int_t)(coefP[i]*(TMath::Power(2,16)-1));
valL[i] = (Int_t)(coefZ[i]*(TMath::Power(2,16)-1));
if (plotFlag) {
char hname[100];
- sprintf(hname,"sec%drow%dpad%d",sector,row,pad);
+ snprintf(hname,100,"sec%drow%dpad%d",sector,row,pad);
new TCanvas(hname,hname,600,400);
//just plotting non-discret pulses | they look pretties in case of mean sig ;-)
pulseTuple->Draw("sigND:timebin","","L");
// pulseTuple->Draw("sigAfterTCF:timebin","","Lsame");
}
- valK->~Int_t();
- valL->~Int_t();
-
- signalIn->~Double_t();
- signalOut->~Double_t();
- delete signalIn;
- delete signalOut;
-
+ delete [] signalIn;
+ delete [] signalOut;
+ delete [] signalInD;
+ delete [] signalOutD;
+
return pulseTuple;
}
TH1F *hisIn;
TKey *key;
TIter next(fileIn.GetListOfKeys());
- TFile *fileOut = 0;
+ // opens a file, although, it might not be uses (see "mode")
+ TFile *fileOut = new TFile(fileNameSum,"UPDATE");
//fileOut.cd();
Int_t nHist=fileIn.GetNkeys();
Int_t secPrev = -1;
char fileNameSumSec[100];
- if (mode==0) {
- fileOut = new TFile(fileNameSum,"UPDATE");
- }
+
while((key=(TKey*)next())) {
const char *hisName = key->GetName();
+ TString name(key->GetName());
+ if (name.Contains("ddl") ) continue; // ignore the 2d histogramms per ddl
+
hisIn=(TH1F*)fileIn.Get(hisName);
+
Int_t numPulse=(Int_t)hisIn->GetBinContent(1);
Int_t sec=(Int_t)hisIn->GetBinContent(2);
Int_t pulseLength= hisIn->GetNbinsX()-4;
fileOut->Close();
}
// opening new file
- sprintf(fileNameSumSec,"%s-Sec%d.root",fileNameSum,sec);
+ snprintf(fileNameSumSec,100,"%s-Sec%d.root",fileNameSum,sec);
fileOut = new TFile(fileNameSumSec,"UPDATE");
secPrev = sec;
}
TKey *key;
// just delete the file entries ...
- TFile fileSum(nameFileSum,"RECREATE");
- fileSum.Close();
+ TFile fileSumD(nameFileSum,"RECREATE");
+ fileSumD.Close();
char nameFileSumSec[100];
for (Int_t sec=0; sec<72; sec++) { // loop over all possible filenames
- sprintf(nameFileSumSec,"%s-Sec%d.root",nameFileSum,sec);
+ snprintf(nameFileSumSec,100,"%s-Sec%d.root",nameFileSum,sec);
TFile *fileSumSec = new TFile(nameFileSumSec,"READ");
Int_t nHist=fileSumSec->GetNkeys();
printf("Sector file %s found\n",nameFileSumSec);
TIter next(fileSumSec->GetListOfKeys());
- while(key=(TKey*)next()) {
+ while( (key=(TKey*)next()) ) {
const char *hisName = key->GetName();
-
+ TString name(hisName);
+ if (name.Contains("ddl") ) continue; // ignore the 2d histogramms per ddl
hisIn=(TH1F*)fileSumSec->Get(hisName);
+
if (iHist%100==0) {
printf("found histogram %d / %d, %s\n",iHist,nHist,hisName);
}
// the roc are retreived from nameFileTCFPerSec. If there are parameters for
// a roc missing, then the parameters are set to -1.
- Float_t K0 = -1, K1 = -1, K2 = -1, L0 = -1, L1 = -1, L2 = -1;
+ Float_t k0 = -1, k1 = -1, k2 = -1, l0 = -1, l1 = -1, l2 = -1;
Int_t roc, row, pad, side, sector, rcu, hwAddr;
Int_t entryNum = 0;
Int_t checksum = 0;
// creating outputfile
ofstream fileOut;
char nameFileOut[255];
- sprintf(nameFileOut,"tpcTCFparamPAD.data");
+ snprintf(nameFileOut,255,"tpcTCFparamPAD.data");
fileOut.open(nameFileOut);
// following not used:
// char headerLine[255];
- // sprintf(headerLine,"15\tside\tsector\tRCU\tHWadr\tK0\tK1\tK2\tL0\tL1\tL2\tValidFlag");
+ // snprintf(headerLine,255,"15\tside\tsector\tRCU\tHWadr\tk0\tk1\tk2\tl0\tl1\tl2\tValidFlag");
// fileOut << headerLine << std::endl;
fileOut << "15" << std::endl;
sector = Int_t(mapping->GetSectorFromRoc(roc));
rcu = Int_t(mapping->GetRcu(roc,row,pad));
hwAddr = Int_t(mapping->GetHWAddress(roc,row,pad));
- K0 = TMath::Nint(paramArgs[7] * (TMath::Power(2,16) - 1));
- K1 = TMath::Nint(paramArgs[8] * (TMath::Power(2,16) - 1));
- K2 = TMath::Nint(paramArgs[9] * (TMath::Power(2,16) - 1));
- L0 = TMath::Nint(paramArgs[4] * (TMath::Power(2,16) - 1));
- L1 = TMath::Nint(paramArgs[5] * (TMath::Power(2,16) - 1));
- L2 = TMath::Nint(paramArgs[6] * (TMath::Power(2,16) - 1));
+ k0 = TMath::Nint(paramArgs[7] * (TMath::Power(2,16) - 1));
+ k1 = TMath::Nint(paramArgs[8] * (TMath::Power(2,16) - 1));
+ k2 = TMath::Nint(paramArgs[9] * (TMath::Power(2,16) - 1));
+ l0 = TMath::Nint(paramArgs[4] * (TMath::Power(2,16) - 1));
+ l1 = TMath::Nint(paramArgs[5] * (TMath::Power(2,16) - 1));
+ l2 = TMath::Nint(paramArgs[6] * (TMath::Power(2,16) - 1));
if (entryNum%10000==0) {
printf("assigned pad %i / %i\n",entryNum,tpcPadNum);
}
fileOut << entryNum++ << "\t" << side << "\t" << sector << "\t" << rcu << "\t" << hwAddr << "\t";
- fileOut << K0 << "\t" << K1 << "\t" << K2 << "\t" << L0 << "\t" << L1 << "\t" << L2 << "\t" << validFlag << std::endl;
+ fileOut << k0 << "\t" << k1 << "\t" << k2 << "\t" << l0 << "\t" << l1 << "\t" << l2 << "\t" << validFlag << std::endl;
entryID[roc*100000 + row*1000 + pad] = 1;
}
for (Int_t iParamSec = 0; iParamSec < paramTupleSec->GetEntries(); iParamSec++) {
paramTupleSec->GetEntry(iParamSec);
Float_t *paramArgsSec = paramTupleSec->GetArgs();
- if (paramArgsSec[0] == roc) {
- K0 = TMath::Nint(paramArgsSec[7] * (TMath::Power(2,16) - 1));
- K1 = TMath::Nint(paramArgsSec[8] * (TMath::Power(2,16) - 1));
- K2 = TMath::Nint(paramArgsSec[9] * (TMath::Power(2,16) - 1));
- L0 = TMath::Nint(paramArgsSec[4] * (TMath::Power(2,16) - 1));
- L1 = TMath::Nint(paramArgsSec[5] * (TMath::Power(2,16) - 1));
- L2 = TMath::Nint(paramArgsSec[6] * (TMath::Power(2,16) - 1));
+ if ((paramArgsSec[0]-roc)<1e-7) { // if roc is found
+ k0 = TMath::Nint(paramArgsSec[7] * (TMath::Power(2,16) - 1));
+ k1 = TMath::Nint(paramArgsSec[8] * (TMath::Power(2,16) - 1));
+ k2 = TMath::Nint(paramArgsSec[9] * (TMath::Power(2,16) - 1));
+ l0 = TMath::Nint(paramArgsSec[4] * (TMath::Power(2,16) - 1));
+ l1 = TMath::Nint(paramArgsSec[5] * (TMath::Power(2,16) - 1));
+ l2 = TMath::Nint(paramArgsSec[6] * (TMath::Power(2,16) - 1));
break;
} else {
- K0 = K1 = K2 = L0 = L1 = L2 = -1;
+ k0 = k1 = k2 = l0 = l1 = l2 = -1;
}
}
for (row = 0; row<mapping->GetNpadrows(roc); row++) {
}
fileOut << entryNum++ << "\t" << side << "\t" << sector << "\t" << rcu << "\t" << hwAddr << "\t";
- fileOut << K0 << "\t" << K1 << "\t" << K2 << "\t" << L0 << "\t" << L1 << "\t" << L2 << "\t" << validFlag << std::endl;
+ fileOut << k0 << "\t" << k1 << "\t" << k2 << "\t" << l0 << "\t" << l1 << "\t" << l2 << "\t" << validFlag << std::endl;
}
}
}
fileOut.close();
fileTCFparam.Close();
fileSecTCFparam.Close();
- entryID->~Bool_t();
+ delete [] entryID;
printf("output written to file: %s\n",nameFileOut);
return 0;
}
//
// If there are parameters for a roc missing, then the parameters are set to -1
- Float_t K0 = -1, K1 = -1, K2 = -1, L0 = -1, L1 = -1, L2 = -1;
+ Float_t k0 = -1, k1 = -1, k2 = -1, l0 = -1, l1 = -1, l2 = -1;
Int_t entryNum = 0;
Int_t validFlag = 0; // 1 if parameters for roc exist
ofstream fileOut;
char nameFileOut[255];
- sprintf(nameFileOut,"tpcTCFparamSector.data");
+ snprintf(nameFileOut,255,"tpcTCFparamSector.data");
fileOut.open(nameFileOut);
// following not used:
// char headerLine[255];
- // sprintf(headerLine,"16\tside\tsector\tRCU\tHWadr\tK0\tK1\tK2\tL0\tL1\tL2\tValidFlag");
+ // snprintf(headerLine,255,"16\tside\tsector\tRCU\tHWadr\tk0\tk1\tk2\tl0\tl1\tl2\tValidFlag");
// fileOut << headerLine << std::endl;
fileOut << "16" << std::endl;
for (Int_t iParam = 0; iParam < paramTupleSec->GetEntries(); iParam++) {
paramTupleSec->GetEntry(iParam);
Float_t *paramArgs = paramTupleSec->GetArgs();
- if (paramArgs[0] == roc) {
+ if ((paramArgs[0]-roc)<1e-7) { // if roc is found
validFlag = 1;
- K0 = TMath::Nint(paramArgs[7] * (TMath::Power(2,16) - 1));
- K1 = TMath::Nint(paramArgs[8] * (TMath::Power(2,16) - 1));
- K2 = TMath::Nint(paramArgs[9] * (TMath::Power(2,16) - 1));
- L0 = TMath::Nint(paramArgs[4] * (TMath::Power(2,16) - 1));
- L1 = TMath::Nint(paramArgs[5] * (TMath::Power(2,16) - 1));
- L2 = TMath::Nint(paramArgs[6] * (TMath::Power(2,16) - 1));
+ k0 = TMath::Nint(paramArgs[7] * (TMath::Power(2,16) - 1));
+ k1 = TMath::Nint(paramArgs[8] * (TMath::Power(2,16) - 1));
+ k2 = TMath::Nint(paramArgs[9] * (TMath::Power(2,16) - 1));
+ l0 = TMath::Nint(paramArgs[4] * (TMath::Power(2,16) - 1));
+ l1 = TMath::Nint(paramArgs[5] * (TMath::Power(2,16) - 1));
+ l2 = TMath::Nint(paramArgs[6] * (TMath::Power(2,16) - 1));
break;
}
}
if (!validFlag) { // No TCF parameters found for this roc
- K0 = K1 = K2 = L0 = L1 = L2 = -1;
+ k0 = k1 = k2 = l0 = l1 = l2 = -1;
}
fileOut << entryNum++ << "\t" << side << "\t" << sector << "\t" << rcu << "\t" << -1 << "\t";
- fileOut << K0 << "\t" << K1 << "\t" << K2 << "\t" << L0 << "\t" << L1 << "\t" << L2 << "\t" << validFlag << std::endl;
+ fileOut << k0 << "\t" << k1 << "\t" << k2 << "\t" << l0 << "\t" << l1 << "\t" << l2 << "\t" << validFlag << std::endl;
}
}
}