* provided "as is" without express or implied warranty. *
**************************************************************************/
-////////////////////////////////////////////////////////////////////////////////
-// //
-// AliTPCCorrection class //
-// //
-// This class provides a general framework to deal with space point //
-// distortions. An correction class which inherits from here is for example //
-// AliTPCExBBShape or AliTPCExBTwist //
-// //
-// General functions are (for example): //
-// CorrectPoint(x,roc) where x is the vector of inital positions in //
-// cartesian coordinates and roc represents the Read Out chamber number //
-// according to the offline naming convention. The vector x is overwritten //
-// with the corrected coordinates. //
-// //
-// An alternative usage would be CorrectPoint(x,roc,dx), which leaves the //
-// vector x untouched, put returns the distortions via the vector dx //
-// //
-// The class allows "effective Omega Tau" corrections to be shifted to the //
-// single distortion classes. //
-// //
-// Note: This class is normally used via the class AliTPCComposedCorrection //
-// //
-// date: 27/04/2010 //
-// Authors: Magnus Mager, Stefan Rossegger, Jim Thomas //
-////////////////////////////////////////////////////////////////////////////////
+// _________________________________________________________________
+//
+// Begin_Html
+// <h2> AliTPCCorrection class </h2>
+//
+// The AliTPCCorrection class provides a general framework to deal with space point distortions.
+// An correction class which inherits from here is for example AliTPCExBBShape or AliTPCExBTwist. <br>
+// General virtual functions are (for example) CorrectPoint(x,roc) where x is the vector of initial
+// positions in cartesian coordinates and roc represents the read-out chamber number according to
+// the offline numbering convention. The vector x is overwritten with the corrected coordinates. <br>
+// An alternative usage would be CorrectPoint(x,roc,dx), which leaves the vector x untouched, but
+// returns the distortions via the vector dx. <br>
+// This class is normally used via the general class AliTPCComposedCorrection.
+// <p>
+// Furthermore, the class contains basic geometrical descriptions like field cage radii
+// (fgkIFCRadius, fgkOFCRadius) and length (fgkTPCZ0) plus the voltages. Also, the definitions
+// of size and widths of the fulcrums building the grid of the final look-up table, which is
+// then interpolated, is defined in kNX and fgkXList).
+// <p>
+// All physics-model classes below are derived from this class in order to not duplicate code
+// and to allow a uniform treatment of all physics models.
+// <p>
+// <h3> Poisson solver </h3>
+// A numerical solver of the Poisson equation (relaxation technique) is implemented for 2-dimensional
+// geometries (r,z) as well as for 3-dimensional problems (r,$\phi$,z). The corresponding function
+// names are PoissonRelaxation?D. The relevant function arguments are the arrays of the boundary and
+// initial conditions (ArrayofArrayV, ArrayofChargeDensities) as well as the grid granularity which
+// is used during the calculation. These inputs can be chosen according to the needs of the physical
+// effect which is supposed to be simulated. In the 3D version, different symmetry conditions can be set
+// in order to reduce the calculation time (used in AliTPCFCVoltError3D).
+// <p>
+// <h3> Unified plotting functionality </h3>
+// Generic plot functions were implemented. They return a histogram pointer in the chosen plane of
+// the TPC drift volume with a selectable grid granularity and the magnitude of the correction vector.
+// For example, the function CreateHistoDZinXY(z,nx,ny) returns a 2-dimensional histogram which contains
+// the longitudinal corrections $dz$ in the (x,y)-plane at the given z position with the granularity of
+// nx and ny. The magnitude of the corrections is defined by the class from which this function is called.
+// In the same manner, standard plots for the (r,$\phi$)-plane and for the other corrections like $dr$ and $rd\phi$ are available
+// <p>
+// Note: This class is normally used via the class AliTPCComposedCorrection
+// End_Html
+//
+// Begin_Macro(source)
+// {
+// gROOT->SetStyle("Plain"); gStyle->SetPalette(1);
+// TCanvas *c2 = new TCanvas("cAliTPCCorrection","cAliTPCCorrection",700,1050); c2->Divide(2,3);
+// AliTPCROCVoltError3D roc; // EXAMPLE PLOTS - SEE BELOW
+// roc.SetOmegaTauT1T2(0,1,1); // B=0
+// Float_t z0 = 1; // at +1 cm -> A side
+// c2->cd(1); roc.CreateHistoDRinXY(1.,300,300)->Draw("cont4z");
+// c2->cd(3);roc.CreateHistoDRPhiinXY(1.,300,300)->Draw("cont4z");
+// c2->cd(5);roc.CreateHistoDZinXY(1.,300,300)->Draw("cont4z");
+// Float_t phi0=0.5;
+// c2->cd(2);roc.CreateHistoDRinZR(phi0)->Draw("surf2");
+// c2->cd(4);roc.CreateHistoDRPhiinZR(phi0)->Draw("surf2");
+// c2->cd(6);roc.CreateHistoDZinZR(phi0)->Draw("surf2");
+// return c2;
+// }
+// End_Macro
+//
+// Begin_Html
+// <p>
+// Date: 27/04/2010 <br>
+// Authors: Magnus Mager, Stefan Rossegger, Jim Thomas
+// End_Html
+// _________________________________________________________________
+
+
+#include "Riostream.h"
#include <TH2F.h>
#include <TMath.h>
#include <TROOT.h>
#include <TTreeStream.h>
+#include <TTree.h>
+#include <TFile.h>
+#include <TTimeStamp.h>
+#include <AliCDBStorage.h>
+#include <AliCDBId.h>
+#include <AliCDBMetaData.h>
+#include "TVectorD.h"
+#include "AliTPCParamSR.h"
-#include "AliExternalTrackParam.h"
-#include "AliTrackPointArray.h"
-#include "TDatabasePDG.h"
-#include "AliTrackerBase.h"
-#include "AliTPCROC.h"
+#include "AliTPCCorrection.h"
+#include "AliLog.h"
+#include "AliExternalTrackParam.h"
+#include "AliTrackPointArray.h"
+#include "TDatabasePDG.h"
+#include "AliTrackerBase.h"
+#include "AliTPCROC.h"
+#include "THnSparse.h"
+
+#include "AliTPCLaserTrack.h"
+#include "AliESDVertex.h"
+#include "AliVertexerTracks.h"
+#include "TDatabasePDG.h"
+#include "TF1.h"
+#include "TRandom.h"
+
+#include "TDatabasePDG.h"
+
+#include "AliTPCTransform.h"
+#include "AliTPCcalibDB.h"
+#include "AliTPCExB.h"
+
+#include "AliTPCRecoParam.h"
-#include "AliTPCCorrection.h"
ClassImp(AliTPCCorrection)
+
+TObjArray *AliTPCCorrection::fgVisualCorrection=0;
+// instance of correction for visualization
+
+
// FIXME: the following values should come from the database
-const Double_t AliTPCCorrection::fgkTPC_Z0 =249.7; // nominal gating grid position
-const Double_t AliTPCCorrection::fgkIFCRadius= 83.06; // Mean Radius of the Inner Field Cage ( 82.43 min, 83.70 max) (cm)
-const Double_t AliTPCCorrection::fgkOFCRadius=254.5; // Mean Radius of the Outer Field Cage (252.55 min, 256.45 max) (cm)
-const Double_t AliTPCCorrection::fgkZOffSet = 0.2; // Offset from CE: calculate all distortions closer to CE as if at this point
-const Double_t AliTPCCorrection::fgkCathodeV =-100000.0; // Cathode Voltage (volts)
-const Double_t AliTPCCorrection::fgkGG =-70.0; // Gating Grid voltage (volts)
-
-
-// FIXME: List of interpolation points (course grid in the middle, fine grid on the borders)
-const Double_t AliTPCCorrection::fgkRList[AliTPCCorrection::kNR] = {
-84.0, 84.5, 85.0, 85.5, 86.0, 87.0, 88.0,
-90.0, 92.0, 94.0, 96.0, 98.0, 100.0, 102.0, 104.0, 106.0, 108.0,
-110.0, 112.0, 114.0, 116.0, 118.0, 120.0, 122.0, 124.0, 126.0, 128.0,
-130.0, 132.0, 134.0, 136.0, 138.0, 140.0, 142.0, 144.0, 146.0, 148.0,
-150.0, 152.0, 154.0, 156.0, 158.0, 160.0, 162.0, 164.0, 166.0, 168.0,
-170.0, 172.0, 174.0, 176.0, 178.0, 180.0, 182.0, 184.0, 186.0, 188.0,
-190.0, 192.0, 194.0, 196.0, 198.0, 200.0, 202.0, 204.0, 206.0, 208.0,
-210.0, 212.0, 214.0, 216.0, 218.0, 220.0, 222.0, 224.0, 226.0, 228.0,
-230.0, 232.0, 234.0, 236.0, 238.0, 240.0, 242.0, 244.0, 246.0, 248.0,
-249.0, 249.5, 250.0, 251.5, 252.0 } ;
-
-const Double_t AliTPCCorrection::fgkZList[AliTPCCorrection::kNZ] = {
--249.5, -249.0, -248.5, -248.0, -247.0, -246.0, -245.0, -243.0, -242.0, -241.0,
--240.0, -238.0, -236.0, -234.0, -232.0, -230.0, -228.0, -226.0, -224.0, -222.0,
--220.0, -218.0, -216.0, -214.0, -212.0, -210.0, -208.0, -206.0, -204.0, -202.0,
--200.0, -198.0, -196.0, -194.0, -192.0, -190.0, -188.0, -186.0, -184.0, -182.0,
--180.0, -178.0, -176.0, -174.0, -172.0, -170.0, -168.0, -166.0, -164.0, -162.0,
--160.0, -158.0, -156.0, -154.0, -152.0, -150.0, -148.0, -146.0, -144.0, -142.0,
--140.0, -138.0, -136.0, -134.0, -132.0, -130.0, -128.0, -126.0, -124.0, -122.0,
--120.0, -118.0, -116.0, -114.0, -112.0, -110.0, -108.0, -106.0, -104.0, -102.0,
--100.0, -98.0, -96.0, -94.0, -92.0, -90.0, -88.0, -86.0, -84.0, -82.0,
--80.0, -78.0, -76.0, -74.0, -72.0, -70.0, -68.0, -66.0, -64.0, -62.0,
--60.0, -58.0, -56.0, -54.0, -52.0, -50.0, -48.0, -46.0, -44.0, -42.0,
--40.0, -38.0, -36.0, -34.0, -32.0, -30.0, -28.0, -26.0, -24.0, -22.0,
--20.0, -18.0, -16.0, -14.0, -12.0, -10.0, -8.0, -6.0, -4.0, -2.0,
--1.0, -0.5, -0.2, -0.1, -0.05, 0.05, 0.1, 0.2, 0.5, 1.0,
- 2.0, 4.0, 6.0, 8.0, 10.0, 12.0, 14.0, 16.0, 18.0, 20.0,
- 22.0, 24.0, 26.0, 28.0, 30.0, 32.0, 34.0, 36.0, 38.0, 40.0,
- 42.0, 44.0, 46.0, 48.0, 50.0, 52.0, 54.0, 56.0, 58.0, 60.0,
- 62.0, 64.0, 66.0, 68.0, 70.0, 72.0, 74.0, 76.0, 78.0, 80.0,
- 82.0, 84.0, 86.0, 88.0, 90.0, 92.0, 94.0, 96.0, 98.0, 100.0,
-102.0, 104.0, 106.0, 108.0, 110.0, 112.0, 114.0, 116.0, 118.0, 120.0,
-122.0, 124.0, 126.0, 128.0, 130.0, 132.0, 134.0, 136.0, 138.0, 140.0,
-142.0, 144.0, 146.0, 148.0, 150.0, 152.0, 154.0, 156.0, 158.0, 160.0,
-162.0, 164.0, 166.0, 168.0, 170.0, 172.0, 174.0, 176.0, 178.0, 180.0,
-182.0, 184.0, 186.0, 188.0, 190.0, 192.0, 194.0, 196.0, 198.0, 200.0,
-202.0, 204.0, 206.0, 208.0, 210.0, 212.0, 214.0, 216.0, 218.0, 220.0,
-222.0, 224.0, 226.0, 228.0, 230.0, 232.0, 234.0, 236.0, 238.0, 240.0,
-242.0, 243.0, 244.0, 245.0, 246.0, 247.0, 248.0, 248.5, 249.0, 249.5 } ;
+const Double_t AliTPCCorrection::fgkTPCZ0 = 249.7; // nominal gating grid position
+const Double_t AliTPCCorrection::fgkIFCRadius= 83.5; // radius which renders the "18 rod manifold" best -> compare calc. of Jim Thomas
+// compare gkIFCRadius= 83.05: Mean Radius of the Inner Field Cage ( 82.43 min, 83.70 max) (cm)
+const Double_t AliTPCCorrection::fgkOFCRadius= 254.5; // Mean Radius of the Outer Field Cage (252.55 min, 256.45 max) (cm)
+const Double_t AliTPCCorrection::fgkZOffSet = 0.2; // Offset from CE: calculate all distortions closer to CE as if at this point
+const Double_t AliTPCCorrection::fgkCathodeV = -100000.0; // Cathode Voltage (volts)
+const Double_t AliTPCCorrection::fgkGG = -70.0; // Gating Grid voltage (volts)
+const Double_t AliTPCCorrection::fgkdvdE = 0.0024; // [cm/V] drift velocity dependency on the E field (from Magboltz for NeCO2N2 at standard environment)
+const Double_t AliTPCCorrection::fgkEM = -1.602176487e-19/9.10938215e-31; // charge/mass in [C/kg]
+const Double_t AliTPCCorrection::fgke0 = 8.854187817e-12; // vacuum permittivity [A·s/(V·m)]
+
AliTPCCorrection::AliTPCCorrection()
- : TNamed("correction_unity","unity"),fJLow(0),fKLow(0)
+ : TNamed("correction_unity","unity"),fILow(0),fJLow(0),fKLow(0), fT1(1), fT2(1)
{
//
// default constructor
//
+ if (!fgVisualCorrection) fgVisualCorrection= new TObjArray;
+
+ InitLookUpfulcrums();
+
}
AliTPCCorrection::AliTPCCorrection(const char *name,const char *title)
- : TNamed(name,title),fJLow(0),fKLow(0)
+: TNamed(name,title),fILow(0),fJLow(0),fKLow(0), fT1(1), fT2(1)
{
//
// default constructor, that set the name and title
//
+ if (!fgVisualCorrection) fgVisualCorrection= new TObjArray;
+
+ InitLookUpfulcrums();
+
}
AliTPCCorrection::~AliTPCCorrection() {
for (Int_t j=0;j<3;++j) x[j]+=dx[j];
}
+void AliTPCCorrection::DistortPointLocal(Float_t x[],const Short_t roc) {
+ //
+ // Distorts the initial coordinates x (cartesian coordinates)
+ // according to the given effect (inherited classes)
+ // roc represents the TPC read out chamber (offline numbering convention)
+ //
+ Float_t gxyz[3]={0,0,0};
+ Double_t alpha = TMath::Pi()*(roc%18+0.5)/18;
+ Double_t ca=TMath::Cos(alpha), sa= TMath::Sin(alpha);
+ gxyz[0]= ca*x[0]+sa*x[1];
+ gxyz[1]= -sa*x[0]+ca*x[1];
+ gxyz[2]= x[2];
+ DistortPoint(gxyz,roc);
+ x[0]= ca*gxyz[0]-sa*gxyz[1];
+ x[1]= +sa*gxyz[0]+ca*gxyz[1];
+ x[2]= gxyz[2];
+}
+void AliTPCCorrection::CorrectPointLocal(Float_t x[],const Short_t roc) {
+ //
+ // Distorts the initial coordinates x (cartesian coordinates)
+ // according to the given effect (inherited classes)
+ // roc represents the TPC read out chamber (offline numbering convention)
+ //
+ Float_t gxyz[3]={0,0,0};
+ Double_t alpha = TMath::Pi()*(roc%18+0.5)/18;
+ Double_t ca=TMath::Cos(alpha), sa= TMath::Sin(alpha);
+ gxyz[0]= ca*x[0]+sa*x[1];
+ gxyz[1]= -sa*x[0]+ca*x[1];
+ gxyz[2]= x[2];
+ CorrectPoint(gxyz,roc);
+ x[0]= ca*gxyz[0]-sa*gxyz[1];
+ x[1]= sa*gxyz[0]+ca*gxyz[1];
+ x[2]= gxyz[2];
+}
+
void AliTPCCorrection::DistortPoint(const Float_t x[],const Short_t roc,Float_t xp[]) {
//
// Distorts the initial coordinates x (cartesian coordinates) and stores the new
//
}
+void AliTPCCorrection::Update(const TTimeStamp &/*timeStamp*/) {
+ //
+ // Update function
+ //
+}
+
void AliTPCCorrection::Print(Option_t* /*option*/) const {
//
// Print function to check which correction classes are used
printf("TPC spacepoint correction: \"%s\"\n",GetTitle());
}
-void AliTPCCorrection:: SetOmegaTauT1T2(Float_t /*omegaTau*/,Float_t /*t1*/,Float_t /*t2*/) {
+void AliTPCCorrection:: SetOmegaTauT1T2(Float_t /*omegaTau*/,Float_t t1,Float_t t2) {
//
// Virtual funtion to pass the wt values (might become event dependent) to the inherited classes
// t1 and t2 represent the "effective omegaTau" corrections and were measured in a dedicated
// calibration run
//
- // SetOmegaTauT1T2(omegaTau, t1, t2);
+ fT1=t1;
+ fT2=t2;
+ //SetOmegaTauT1T2(omegaTau, t1, t2);
}
TH2F* AliTPCCorrection::CreateHistoDRinXY(Float_t z,Int_t nx,Int_t ny) {
// in respect to position z within the XY plane.
// The histogramm has nx times ny entries.
//
-
+ AliTPCParam* tpcparam = new AliTPCParamSR;
+
TH2F *h=CreateTH2F("dr_xy",GetTitle(),"x [cm]","y [cm]","dr [cm]",
nx,-250.,250.,ny,-250.,250.);
Float_t x[3],dx[3];
x[0]=h->GetXaxis()->GetBinCenter(ix);
GetCorrection(x,roc,dx);
Float_t r0=TMath::Sqrt((x[0] )*(x[0] )+(x[1] )*(x[1] ));
- if (90.<=r0 && r0<=250.) {
+ if (tpcparam->GetPadRowRadii(0,0)<=r0 && r0<=tpcparam->GetPadRowRadii(36,95)) {
Float_t r1=TMath::Sqrt((x[0]+dx[0])*(x[0]+dx[0])+(x[1]+dx[1])*(x[1]+dx[1]));
h->SetBinContent(ix,iy,r1-r0);
}
h->SetBinContent(ix,iy,0.);
}
}
+ delete tpcparam;
return h;
}
// The histogramm has nx times ny entries.
//
+ AliTPCParam* tpcparam = new AliTPCParamSR;
+
TH2F *h=CreateTH2F("drphi_xy",GetTitle(),"x [cm]","y [cm]","drphi [cm]",
nx,-250.,250.,ny,-250.,250.);
Float_t x[3],dx[3];
x[0]=h->GetXaxis()->GetBinCenter(ix);
GetCorrection(x,roc,dx);
Float_t r0=TMath::Sqrt((x[0] )*(x[0] )+(x[1] )*(x[1] ));
- if (90.<=r0 && r0<=250.) {
+ if (tpcparam->GetPadRowRadii(0,0)<=r0 && r0<=tpcparam->GetPadRowRadii(36,95)) {
Float_t phi0=TMath::ATan2(x[1] ,x[0] );
Float_t phi1=TMath::ATan2(x[1]+dx[1],x[0]+dx[0]);
h->SetBinContent(ix,iy,0.);
}
}
+ delete tpcparam;
+ return h;
+}
+
+TH2F* AliTPCCorrection::CreateHistoDZinXY(Float_t z,Int_t nx,Int_t ny) {
+ //
+ // Simple plot functionality.
+ // Returns a 2d hisogram which represents the corrections in longitudinal direction (dz)
+ // in respect to position z within the XY plane.
+ // The histogramm has nx times ny entries.
+ //
+
+ AliTPCParam* tpcparam = new AliTPCParamSR;
+
+ TH2F *h=CreateTH2F("dz_xy",GetTitle(),"x [cm]","y [cm]","dz [cm]",
+ nx,-250.,250.,ny,-250.,250.);
+ Float_t x[3],dx[3];
+ x[2]=z;
+ Int_t roc=z>0.?0:18; // FIXME
+ for (Int_t iy=1;iy<=ny;++iy) {
+ x[1]=h->GetYaxis()->GetBinCenter(iy);
+ for (Int_t ix=1;ix<=nx;++ix) {
+ x[0]=h->GetXaxis()->GetBinCenter(ix);
+ GetCorrection(x,roc,dx);
+ Float_t r0=TMath::Sqrt((x[0] )*(x[0] )+(x[1] )*(x[1] ));
+ if (tpcparam->GetPadRowRadii(0,0)<=r0 && r0<=tpcparam->GetPadRowRadii(36,95)) {
+ h->SetBinContent(ix,iy,dx[2]);
+ }
+ else
+ h->SetBinContent(ix,iy,0.);
+ }
+ }
+ delete tpcparam;
return h;
}
h->SetBinContent(iz,ir,r1-r0);
}
}
- printf("SDF\n");
return h;
}
return h;
}
+TH2F* AliTPCCorrection::CreateHistoDZinZR(Float_t phi,Int_t nz,Int_t nr) {
+ //
+ // Simple plot functionality.
+ // Returns a 2d hisogram which represents the corrections in longitudinal direction (dz)
+ // in respect to angle phi within the ZR plane.
+ // The histogramm has nx times ny entries.
+ //
+ TH2F *h=CreateTH2F("dz_zr",GetTitle(),"z [cm]","r [cm]","dz [cm]",
+ nz,-250.,250.,nr,85.,250.);
+ Float_t x[3],dx[3];
+ for (Int_t ir=1;ir<=nr;++ir) {
+ Float_t radius=h->GetYaxis()->GetBinCenter(ir);
+ x[0]=radius*TMath::Cos(phi);
+ x[1]=radius*TMath::Sin(phi);
+ for (Int_t iz=1;iz<=nz;++iz) {
+ x[2]=h->GetXaxis()->GetBinCenter(iz);
+ Int_t roc=x[2]>0.?0:18; // FIXME
+ GetCorrection(x,roc,dx);
+ h->SetBinContent(iz,ir,dx[2]);
+ }
+ }
+ return h;
+
+}
+
+
TH2F* AliTPCCorrection::CreateTH2F(const char *name,const char *title,
const char *xlabel,const char *ylabel,const char *zlabel,
Int_t nbinsx,Double_t xlow,Double_t xup,
return h;
}
-
// Simple Interpolation functions: e.g. with bi(tri)cubic interpolations (not yet in TH2 and TH3)
void AliTPCCorrection::Interpolate2DEdistortion( const Int_t order, const Double_t r, const Double_t z,
- const Double_t er[kNZ][kNR], Double_t &er_value )
-{
+ const Double_t er[kNZ][kNR], Double_t &erValue ) {
//
// Interpolate table - 2D interpolation
//
- Double_t save_er[10] ;
+ Double_t saveEr[5] = {0,0,0,0,0};
Search( kNZ, fgkZList, z, fJLow ) ;
Search( kNR, fgkRList, r, fKLow ) ;
if ( fKLow + order >= kNR - 1 ) fKLow = kNR - 1 - order ;
for ( Int_t j = fJLow ; j < fJLow + order + 1 ; j++ ) {
- save_er[j-fJLow] = Interpolate( &fgkRList[fKLow], &er[j][fKLow], order, r ) ;
+ saveEr[j-fJLow] = Interpolate( &fgkRList[fKLow], &er[j][fKLow], order, r ) ;
+ }
+ erValue = Interpolate( &fgkZList[fJLow], saveEr, order, z ) ;
+
+}
+
+void AliTPCCorrection::Interpolate3DEdistortion( const Int_t order, const Double_t r, const Float_t phi, const Double_t z,
+ const Double_t er[kNZ][kNPhi][kNR], const Double_t ephi[kNZ][kNPhi][kNR], const Double_t ez[kNZ][kNPhi][kNR],
+ Double_t &erValue, Double_t &ephiValue, Double_t &ezValue) {
+ //
+ // Interpolate table - 3D interpolation
+ //
+
+ Double_t saveEr[5]= {0,0,0,0,0};
+ Double_t savedEr[5]= {0,0,0,0,0} ;
+
+ Double_t saveEphi[5]= {0,0,0,0,0};
+ Double_t savedEphi[5]= {0,0,0,0,0} ;
+
+ Double_t saveEz[5]= {0,0,0,0,0};
+ Double_t savedEz[5]= {0,0,0,0,0} ;
+
+ Search( kNZ, fgkZList, z, fILow ) ;
+ Search( kNPhi, fgkPhiList, z, fJLow ) ;
+ Search( kNR, fgkRList, r, fKLow ) ;
+
+ if ( fILow < 0 ) fILow = 0 ; // check if out of range
+ if ( fJLow < 0 ) fJLow = 0 ;
+ if ( fKLow < 0 ) fKLow = 0 ;
+
+ if ( fILow + order >= kNZ - 1 ) fILow = kNZ - 1 - order ;
+ if ( fJLow + order >= kNPhi - 1 ) fJLow = kNPhi - 1 - order ;
+ if ( fKLow + order >= kNR - 1 ) fKLow = kNR - 1 - order ;
+
+ for ( Int_t i = fILow ; i < fILow + order + 1 ; i++ ) {
+ for ( Int_t j = fJLow ; j < fJLow + order + 1 ; j++ ) {
+ saveEr[j-fJLow] = Interpolate( &fgkRList[fKLow], &er[i][j][fKLow], order, r ) ;
+ saveEphi[j-fJLow] = Interpolate( &fgkRList[fKLow], &ephi[i][j][fKLow], order, r ) ;
+ saveEz[j-fJLow] = Interpolate( &fgkRList[fKLow], &ez[i][j][fKLow], order, r ) ;
+ }
+ savedEr[i-fILow] = Interpolate( &fgkPhiList[fJLow], saveEr, order, phi ) ;
+ savedEphi[i-fILow] = Interpolate( &fgkPhiList[fJLow], saveEphi, order, phi ) ;
+ savedEz[i-fILow] = Interpolate( &fgkPhiList[fJLow], saveEz, order, phi ) ;
}
- er_value = Interpolate( &fgkZList[fJLow], save_er, order, z ) ;
+ erValue = Interpolate( &fgkZList[fILow], savedEr, order, z ) ;
+ ephiValue = Interpolate( &fgkZList[fILow], savedEphi, order, z ) ;
+ ezValue = Interpolate( &fgkZList[fILow], savedEz, order, z ) ;
+
+}
+
+Double_t AliTPCCorrection::Interpolate2DTable( const Int_t order, const Double_t x, const Double_t y,
+ const Int_t nx, const Int_t ny, const Double_t xv[], const Double_t yv[],
+ const TMatrixD &array ) {
+ //
+ // Interpolate table (TMatrix format) - 2D interpolation
+ //
+
+ static Int_t jlow = 0, klow = 0 ;
+ Double_t saveArray[5] = {0,0,0,0,0} ;
+
+ Search( nx, xv, x, jlow ) ;
+ Search( ny, yv, y, klow ) ;
+ if ( jlow < 0 ) jlow = 0 ; // check if out of range
+ if ( klow < 0 ) klow = 0 ;
+ if ( jlow + order >= nx - 1 ) jlow = nx - 1 - order ;
+ if ( klow + order >= ny - 1 ) klow = ny - 1 - order ;
+
+ for ( Int_t j = jlow ; j < jlow + order + 1 ; j++ )
+ {
+ Double_t *ajkl = &((TMatrixD&)array)(j,klow);
+ saveArray[j-jlow] = Interpolate( &yv[klow], ajkl , order, y ) ;
+ }
+
+ return( Interpolate( &xv[jlow], saveArray, order, x ) ) ;
}
+Double_t AliTPCCorrection::Interpolate3DTable( const Int_t order, const Double_t x, const Double_t y, const Double_t z,
+ const Int_t nx, const Int_t ny, const Int_t nz,
+ const Double_t xv[], const Double_t yv[], const Double_t zv[],
+ TMatrixD **arrayofArrays ) {
+ //
+ // Interpolate table (TMatrix format) - 3D interpolation
+ //
+
+ static Int_t ilow = 0, jlow = 0, klow = 0 ;
+ Double_t saveArray[5]= {0,0,0,0,0};
+ Double_t savedArray[5]= {0,0,0,0,0} ;
+
+ Search( nx, xv, x, ilow ) ;
+ Search( ny, yv, y, jlow ) ;
+ Search( nz, zv, z, klow ) ;
+
+ if ( ilow < 0 ) ilow = 0 ; // check if out of range
+ if ( jlow < 0 ) jlow = 0 ;
+ if ( klow < 0 ) klow = 0 ;
+
+ if ( ilow + order >= nx - 1 ) ilow = nx - 1 - order ;
+ if ( jlow + order >= ny - 1 ) jlow = ny - 1 - order ;
+ if ( klow + order >= nz - 1 ) klow = nz - 1 - order ;
+
+ for ( Int_t k = klow ; k < klow + order + 1 ; k++ )
+ {
+ TMatrixD &table = *arrayofArrays[k] ;
+ for ( Int_t i = ilow ; i < ilow + order + 1 ; i++ )
+ {
+ saveArray[i-ilow] = Interpolate( &yv[jlow], &table(i,jlow), order, y ) ;
+ }
+ savedArray[k-klow] = Interpolate( &xv[ilow], saveArray, order, x ) ;
+ }
+ return( Interpolate( &zv[klow], savedArray, order, z ) ) ;
+
+}
Double_t AliTPCCorrection::Interpolate( const Double_t xArray[], const Double_t yArray[],
- const Int_t order, const Double_t x )
-{
+ const Int_t order, const Double_t x ) {
//
// Interpolate function Y(x) using linear (order=1) or quadratic (order=2) interpolation.
//
}
+Float_t AliTPCCorrection::Interpolate2DTable( const Int_t order, const Double_t x, const Double_t y,
+ const Int_t nx, const Int_t ny, const Double_t xv[], const Double_t yv[],
+ const TMatrixF &array ) {
+ //
+ // Interpolate table (TMatrix format) - 2D interpolation
+ // Float version (in order to decrease the OCDB size)
+ //
-void AliTPCCorrection::Search( const Int_t n, const Double_t xArray[], const Double_t x, Int_t &low )
-{
+ static Int_t jlow = 0, klow = 0 ;
+ Float_t saveArray[5] = {0.,0.,0.,0.,0.} ;
+
+ Search( nx, xv, x, jlow ) ;
+ Search( ny, yv, y, klow ) ;
+ if ( jlow < 0 ) jlow = 0 ; // check if out of range
+ if ( klow < 0 ) klow = 0 ;
+ if ( jlow + order >= nx - 1 ) jlow = nx - 1 - order ;
+ if ( klow + order >= ny - 1 ) klow = ny - 1 - order ;
+
+ for ( Int_t j = jlow ; j < jlow + order + 1 ; j++ )
+ {
+ Float_t *ajkl = &((TMatrixF&)array)(j,klow);
+ saveArray[j-jlow] = Interpolate( &yv[klow], ajkl , order, y ) ;
+ }
+
+ return( Interpolate( &xv[jlow], saveArray, order, x ) ) ;
+
+}
+
+Float_t AliTPCCorrection::Interpolate3DTable( const Int_t order, const Double_t x, const Double_t y, const Double_t z,
+ const Int_t nx, const Int_t ny, const Int_t nz,
+ const Double_t xv[], const Double_t yv[], const Double_t zv[],
+ TMatrixF **arrayofArrays ) {
+ //
+ // Interpolate table (TMatrix format) - 3D interpolation
+ // Float version (in order to decrease the OCDB size)
+ //
+
+ static Int_t ilow = 0, jlow = 0, klow = 0 ;
+ Float_t saveArray[5]= {0.,0.,0.,0.,0.};
+ Float_t savedArray[5]= {0.,0.,0.,0.,0.} ;
+
+ Search( nx, xv, x, ilow ) ;
+ Search( ny, yv, y, jlow ) ;
+ Search( nz, zv, z, klow ) ;
+
+ if ( ilow < 0 ) ilow = 0 ; // check if out of range
+ if ( jlow < 0 ) jlow = 0 ;
+ if ( klow < 0 ) klow = 0 ;
+
+ if ( ilow + order >= nx - 1 ) ilow = nx - 1 - order ;
+ if ( jlow + order >= ny - 1 ) jlow = ny - 1 - order ;
+ if ( klow + order >= nz - 1 ) klow = nz - 1 - order ;
+
+ for ( Int_t k = klow ; k < klow + order + 1 ; k++ )
+ {
+ TMatrixF &table = *arrayofArrays[k] ;
+ for ( Int_t i = ilow ; i < ilow + order + 1 ; i++ )
+ {
+ saveArray[i-ilow] = Interpolate( &yv[jlow], &table(i,jlow), order, y ) ;
+ }
+ savedArray[k-klow] = Interpolate( &xv[ilow], saveArray, order, x ) ;
+ }
+ return( Interpolate( &zv[klow], savedArray, order, z ) ) ;
+
+}
+Float_t AliTPCCorrection::Interpolate( const Double_t xArray[], const Float_t yArray[],
+ const Int_t order, const Double_t x ) {
+ //
+ // Interpolate function Y(x) using linear (order=1) or quadratic (order=2) interpolation.
+ // Float version (in order to decrease the OCDB size)
+ //
+
+ Float_t y ;
+ if ( order == 2 ) { // Quadratic Interpolation = 2
+ y = (x-xArray[1]) * (x-xArray[2]) * yArray[0] / ( (xArray[0]-xArray[1]) * (xArray[0]-xArray[2]) ) ;
+ y += (x-xArray[2]) * (x-xArray[0]) * yArray[1] / ( (xArray[1]-xArray[2]) * (xArray[1]-xArray[0]) ) ;
+ y += (x-xArray[0]) * (x-xArray[1]) * yArray[2] / ( (xArray[2]-xArray[0]) * (xArray[2]-xArray[1]) ) ;
+ } else { // Linear Interpolation = 1
+ y = yArray[0] + ( yArray[1]-yArray[0] ) * ( x-xArray[0] ) / ( xArray[1] - xArray[0] ) ;
+ }
+
+ return (y);
+
+}
+
+
+
+void AliTPCCorrection::Search( const Int_t n, const Double_t xArray[], const Double_t x, Int_t &low ) {
//
// Search an ordered table by starting at the most recently used point
//
}
+void AliTPCCorrection::InitLookUpfulcrums() {
+ //
+ // Initialization of interpolation points - for main look up table
+ // (course grid in the middle, fine grid on the borders)
+ //
+
+ AliTPCROC * roc = AliTPCROC::Instance();
+ const Double_t rLow = TMath::Floor(roc->GetPadRowRadii(0,0))-1; // first padRow plus some margin
+
+ // fulcrums in R
+ fgkRList[0] = rLow;
+ for (Int_t i = 1; i<kNR; i++) {
+ fgkRList[i] = fgkRList[i-1] + 3.5; // 3.5 cm spacing
+ if (fgkRList[i]<90 ||fgkRList[i]>245)
+ fgkRList[i] = fgkRList[i-1] + 0.5; // 0.5 cm spacing
+ else if (fgkRList[i]<100 || fgkRList[i]>235)
+ fgkRList[i] = fgkRList[i-1] + 1.5; // 1.5 cm spacing
+ else if (fgkRList[i]<120 || fgkRList[i]>225)
+ fgkRList[i] = fgkRList[i-1] + 2.5; // 2.5 cm spacing
+ }
+
+ // fulcrums in Z
+ fgkZList[0] = -249.5;
+ fgkZList[kNZ-1] = 249.5;
+ for (Int_t j = 1; j<kNZ/2; j++) {
+ fgkZList[j] = fgkZList[j-1];
+ if (TMath::Abs(fgkZList[j])< 0.15)
+ fgkZList[j] = fgkZList[j-1] + 0.09; // 0.09 cm spacing
+ else if(TMath::Abs(fgkZList[j])< 0.6)
+ fgkZList[j] = fgkZList[j-1] + 0.4; // 0.4 cm spacing
+ else if (TMath::Abs(fgkZList[j])< 2.5 || TMath::Abs(fgkZList[j])>248)
+ fgkZList[j] = fgkZList[j-1] + 0.5; // 0.5 cm spacing
+ else if (TMath::Abs(fgkZList[j])<10 || TMath::Abs(fgkZList[j])>235)
+ fgkZList[j] = fgkZList[j-1] + 1.5; // 1.5 cm spacing
+ else if (TMath::Abs(fgkZList[j])<25 || TMath::Abs(fgkZList[j])>225)
+ fgkZList[j] = fgkZList[j-1] + 2.5; // 2.5 cm spacing
+ else
+ fgkZList[j] = fgkZList[j-1] + 4; // 4 cm spacing
+
+ fgkZList[kNZ-j-1] = -fgkZList[j];
+ }
+
+ // fulcrums in phi
+ for (Int_t k = 0; k<kNPhi; k++)
+ fgkPhiList[k] = TMath::TwoPi()*k/(kNPhi-1);
+
+
+}
+
+
+void AliTPCCorrection::PoissonRelaxation2D(TMatrixD &arrayV, TMatrixD &chargeDensity,
+ TMatrixD &arrayErOverEz, TMatrixD &arrayDeltaEz,
+ const Int_t rows, const Int_t columns, const Int_t iterations,
+ const Bool_t rocDisplacement ) {
+ //
+ // Solve Poisson's Equation by Relaxation Technique in 2D (assuming cylindrical symmetry)
+ //
+ // Solve Poissons equation in a cylindrical coordinate system. The arrayV matrix must be filled with the
+ // boundary conditions on the first and last rows, and the first and last columns. The remainder of the
+ // array can be blank or contain a preliminary guess at the solution. The Charge density matrix contains
+ // the enclosed spacecharge density at each point. The charge density matrix can be full of zero's if
+ // you wish to solve Laplaces equation however it should not contain random numbers or you will get
+ // random numbers back as a solution.
+ // Poisson's equation is solved by iteratively relaxing the matrix to the final solution. In order to
+ // speed up the convergence to the best solution, this algorithm does a binary expansion of the solution
+ // space. First it solves the problem on a very sparse grid by skipping rows and columns in the original
+ // matrix. Then it doubles the number of points and solves the problem again. Then it doubles the
+ // number of points and solves the problem again. This happens several times until the maximum number
+ // of points has been included in the array.
+ //
+ // NOTE: In order for this algorithmto work, the number of rows and columns must be a power of 2 plus one.
+ // So rows == 2**M + 1 and columns == 2**N + 1. The number of rows and columns can be different.
+ //
+ // NOTE: rocDisplacement is used to include (or ignore) the ROC misalignment in the dz calculation
+ //
+ // Original code by Jim Thomas (STAR TPC Collaboration)
+ //
+
+ Double_t ezField = (fgkCathodeV-fgkGG)/fgkTPCZ0; // = ALICE Electric Field (V/cm) Magnitude ~ -400 V/cm;
+
+ const Float_t gridSizeR = (fgkOFCRadius-fgkIFCRadius) / (rows-1) ;
+ const Float_t gridSizeZ = fgkTPCZ0 / (columns-1) ;
+ const Float_t ratio = gridSizeR*gridSizeR / (gridSizeZ*gridSizeZ) ;
+
+ TMatrixD arrayEr(rows,columns) ;
+ TMatrixD arrayEz(rows,columns) ;
+
+ //Check that number of rows and columns is suitable for a binary expansion
+
+ if ( !IsPowerOfTwo(rows-1) ) {
+ AliError("PoissonRelaxation - Error in the number of rows. Must be 2**M - 1");
+ return;
+ }
+ if ( !IsPowerOfTwo(columns-1) ) {
+ AliError("PoissonRelaxation - Error in the number of columns. Must be 2**N - 1");
+ return;
+ }
+
+ // Solve Poisson's equation in cylindrical coordinates by relaxation technique
+ // Allow for different size grid spacing in R and Z directions
+ // Use a binary expansion of the size of the matrix to speed up the solution of the problem
+
+ Int_t iOne = (rows-1)/4 ;
+ Int_t jOne = (columns-1)/4 ;
+ // Solve for N in 2**N, add one.
+ Int_t loops = 1 + (int) ( 0.5 + TMath::Log2( (double) TMath::Max(iOne,jOne) ) ) ;
+
+ for ( Int_t count = 0 ; count < loops ; count++ ) {
+ // Loop while the matrix expands & the resolution increases.
+
+ Float_t tempGridSizeR = gridSizeR * iOne ;
+ Float_t tempRatio = ratio * iOne * iOne / ( jOne * jOne ) ;
+ Float_t tempFourth = 1.0 / (2.0 + 2.0*tempRatio) ;
+
+ // Do this the standard C++ way to avoid gcc extensions for Float_t coef1[rows]
+ std::vector<float> coef1(rows) ;
+ std::vector<float> coef2(rows) ;
+
+ for ( Int_t i = iOne ; i < rows-1 ; i+=iOne ) {
+ Float_t radius = fgkIFCRadius + i*gridSizeR ;
+ coef1[i] = 1.0 + tempGridSizeR/(2*radius);
+ coef2[i] = 1.0 - tempGridSizeR/(2*radius);
+ }
+
+ TMatrixD sumChargeDensity(rows,columns) ;
+
+ for ( Int_t i = iOne ; i < rows-1 ; i += iOne ) {
+ Float_t radius = fgkIFCRadius + iOne*gridSizeR ;
+ for ( Int_t j = jOne ; j < columns-1 ; j += jOne ) {
+ if ( iOne == 1 && jOne == 1 ) sumChargeDensity(i,j) = chargeDensity(i,j) ;
+ else {
+ // Add up all enclosed charge density contributions within 1/2 unit in all directions
+ Float_t weight = 0.0 ;
+ Float_t sum = 0.0 ;
+ sumChargeDensity(i,j) = 0.0 ;
+ for ( Int_t ii = i-iOne/2 ; ii <= i+iOne/2 ; ii++ ) {
+ for ( Int_t jj = j-jOne/2 ; jj <= j+jOne/2 ; jj++ ) {
+ if ( ii == i-iOne/2 || ii == i+iOne/2 || jj == j-jOne/2 || jj == j+jOne/2 ) weight = 0.5 ;
+ else
+ weight = 1.0 ;
+ // Note that this is cylindrical geometry
+ sumChargeDensity(i,j) += chargeDensity(ii,jj)*weight*radius ;
+ sum += weight*radius ;
+ }
+ }
+ sumChargeDensity(i,j) /= sum ;
+ }
+ sumChargeDensity(i,j) *= tempGridSizeR*tempGridSizeR; // just saving a step later on
+ }
+ }
+
+ for ( Int_t k = 1 ; k <= iterations; k++ ) {
+ // Solve Poisson's Equation
+ // Over-relaxation index, must be >= 1 but < 2. Arrange for it to evolve from 2 => 1
+ // as interations increase.
+ Float_t overRelax = 1.0 + TMath::Sqrt( TMath::Cos( (k*TMath::PiOver2())/iterations ) ) ;
+ Float_t overRelaxM1 = overRelax - 1.0 ;
+ Float_t overRelaxtempFourth, overRelaxcoef5 ;
+ overRelaxtempFourth = overRelax * tempFourth ;
+ overRelaxcoef5 = overRelaxM1 / overRelaxtempFourth ;
+
+ for ( Int_t i = iOne ; i < rows-1 ; i += iOne ) {
+ for ( Int_t j = jOne ; j < columns-1 ; j += jOne ) {
+
+ arrayV(i,j) = ( coef2[i] * arrayV(i-iOne,j)
+ + tempRatio * ( arrayV(i,j-jOne) + arrayV(i,j+jOne) )
+ - overRelaxcoef5 * arrayV(i,j)
+ + coef1[i] * arrayV(i+iOne,j)
+ + sumChargeDensity(i,j)
+ ) * overRelaxtempFourth;
+ }
+ }
+
+ if ( k == iterations ) {
+ // After full solution is achieved, copy low resolution solution into higher res array
+ for ( Int_t i = iOne ; i < rows-1 ; i += iOne ) {
+ for ( Int_t j = jOne ; j < columns-1 ; j += jOne ) {
+
+ if ( iOne > 1 ) {
+ arrayV(i+iOne/2,j) = ( arrayV(i+iOne,j) + arrayV(i,j) ) / 2 ;
+ if ( i == iOne ) arrayV(i-iOne/2,j) = ( arrayV(0,j) + arrayV(iOne,j) ) / 2 ;
+ }
+ if ( jOne > 1 ) {
+ arrayV(i,j+jOne/2) = ( arrayV(i,j+jOne) + arrayV(i,j) ) / 2 ;
+ if ( j == jOne ) arrayV(i,j-jOne/2) = ( arrayV(i,0) + arrayV(i,jOne) ) / 2 ;
+ }
+ if ( iOne > 1 && jOne > 1 ) {
+ arrayV(i+iOne/2,j+jOne/2) = ( arrayV(i+iOne,j+jOne) + arrayV(i,j) ) / 2 ;
+ if ( i == iOne ) arrayV(i-iOne/2,j-jOne/2) = ( arrayV(0,j-jOne) + arrayV(iOne,j) ) / 2 ;
+ if ( j == jOne ) arrayV(i-iOne/2,j-jOne/2) = ( arrayV(i-iOne,0) + arrayV(i,jOne) ) / 2 ;
+ // Note that this leaves a point at the upper left and lower right corners uninitialized.
+ // -> Not a big deal.
+ }
+
+ }
+ }
+ }
+
+ }
+
+ iOne = iOne / 2 ; if ( iOne < 1 ) iOne = 1 ;
+ jOne = jOne / 2 ; if ( jOne < 1 ) jOne = 1 ;
+
+ sumChargeDensity.Clear();
+ }
+
+ // Differentiate V(r) and solve for E(r) using special equations for the first and last rows
+ for ( Int_t j = 0 ; j < columns ; j++ ) {
+ for ( Int_t i = 1 ; i < rows-1 ; i++ ) arrayEr(i,j) = -1 * ( arrayV(i+1,j) - arrayV(i-1,j) ) / (2*gridSizeR) ;
+ arrayEr(0,j) = -1 * ( -0.5*arrayV(2,j) + 2.0*arrayV(1,j) - 1.5*arrayV(0,j) ) / gridSizeR ;
+ arrayEr(rows-1,j) = -1 * ( 1.5*arrayV(rows-1,j) - 2.0*arrayV(rows-2,j) + 0.5*arrayV(rows-3,j) ) / gridSizeR ;
+ }
+
+ // Differentiate V(z) and solve for E(z) using special equations for the first and last columns
+ for ( Int_t i = 0 ; i < rows ; i++) {
+ for ( Int_t j = 1 ; j < columns-1 ; j++ ) arrayEz(i,j) = -1 * ( arrayV(i,j+1) - arrayV(i,j-1) ) / (2*gridSizeZ) ;
+ arrayEz(i,0) = -1 * ( -0.5*arrayV(i,2) + 2.0*arrayV(i,1) - 1.5*arrayV(i,0) ) / gridSizeZ ;
+ arrayEz(i,columns-1) = -1 * ( 1.5*arrayV(i,columns-1) - 2.0*arrayV(i,columns-2) + 0.5*arrayV(i,columns-3) ) / gridSizeZ ;
+ }
+
+ for ( Int_t i = 0 ; i < rows ; i++) {
+ // Note: go back and compare to old version of this code. See notes below.
+ // JT Test ... attempt to divide by real Ez not Ez to first order
+ for ( Int_t j = 0 ; j < columns ; j++ ) {
+ arrayEz(i,j) += ezField;
+ // This adds back the overall Z gradient of the field (main E field component)
+ }
+ // Warning: (-=) assumes you are using an error potetial without the overall Field included
+ }
+
+ // Integrate Er/Ez from Z to zero
+ for ( Int_t j = 0 ; j < columns ; j++ ) {
+ for ( Int_t i = 0 ; i < rows ; i++ ) {
+
+ Int_t index = 1 ; // Simpsons rule if N=odd. If N!=odd then add extra point by trapezoidal rule.
+ arrayErOverEz(i,j) = 0.0 ;
+ arrayDeltaEz(i,j) = 0.0 ;
+
+ for ( Int_t k = j ; k < columns ; k++ ) {
+ arrayErOverEz(i,j) += index*(gridSizeZ/3.0)*arrayEr(i,k)/arrayEz(i,k) ;
+ arrayDeltaEz(i,j) += index*(gridSizeZ/3.0)*(arrayEz(i,k)-ezField) ;
+ if ( index != 4 ) index = 4; else index = 2 ;
+ }
+ if ( index == 4 ) {
+ arrayErOverEz(i,j) -= (gridSizeZ/3.0)*arrayEr(i,columns-1)/arrayEz(i,columns-1) ;
+ arrayDeltaEz(i,j) -= (gridSizeZ/3.0)*(arrayEz(i,columns-1)-ezField) ;
+ }
+ if ( index == 2 ) {
+ arrayErOverEz(i,j) += (gridSizeZ/3.0) * ( 0.5*arrayEr(i,columns-2)/arrayEz(i,columns-2)
+ -2.5*arrayEr(i,columns-1)/arrayEz(i,columns-1));
+ arrayDeltaEz(i,j) += (gridSizeZ/3.0) * ( 0.5*(arrayEz(i,columns-2)-ezField)
+ -2.5*(arrayEz(i,columns-1)-ezField));
+ }
+ if ( j == columns-2 ) {
+ arrayErOverEz(i,j) = (gridSizeZ/3.0) * ( 1.5*arrayEr(i,columns-2)/arrayEz(i,columns-2)
+ +1.5*arrayEr(i,columns-1)/arrayEz(i,columns-1) ) ;
+ arrayDeltaEz(i,j) = (gridSizeZ/3.0) * ( 1.5*(arrayEz(i,columns-2)-ezField)
+ +1.5*(arrayEz(i,columns-1)-ezField) ) ;
+ }
+ if ( j == columns-1 ) {
+ arrayErOverEz(i,j) = 0.0 ;
+ arrayDeltaEz(i,j) = 0.0 ;
+ }
+ }
+ }
+
+ // calculate z distortion from the integrated Delta Ez residuals
+ // and include the aquivalence (Volt to cm) of the ROC shift !!
+
+ for ( Int_t j = 0 ; j < columns ; j++ ) {
+ for ( Int_t i = 0 ; i < rows ; i++ ) {
+
+ // Scale the Ez distortions with the drift velocity pertubation -> delivers cm
+ arrayDeltaEz(i,j) = arrayDeltaEz(i,j)*fgkdvdE;
+
+ // ROC Potential in cm aquivalent
+ Double_t dzROCShift = arrayV(i, columns -1)/ezField;
+ if ( rocDisplacement ) arrayDeltaEz(i,j) = arrayDeltaEz(i,j) + dzROCShift; // add the ROC misaligment
+
+ }
+ }
+
+ arrayEr.Clear();
+ arrayEz.Clear();
+
+}
+
+void AliTPCCorrection::PoissonRelaxation3D( TMatrixD**arrayofArrayV, TMatrixD**arrayofChargeDensities,
+ TMatrixD**arrayofEroverEz, TMatrixD**arrayofEPhioverEz, TMatrixD**arrayofDeltaEz,
+ const Int_t rows, const Int_t columns, const Int_t phislices,
+ const Float_t deltaphi, const Int_t iterations, const Int_t symmetry,
+ Bool_t rocDisplacement ) {
+ //
+ // 3D - Solve Poisson's Equation in 3D by Relaxation Technique
+ //
+ // NOTE: In order for this algorith to work, the number of rows and columns must be a power of 2 plus one.
+ // The number of rows and COLUMNS can be different.
+ //
+ // ROWS == 2**M + 1
+ // COLUMNS == 2**N + 1
+ // PHISLICES == Arbitrary but greater than 3
+ //
+ // DeltaPhi in Radians
+ //
+ // SYMMETRY = 0 if no phi symmetries, and no phi boundary conditions
+ // = 1 if we have reflection symmetry at the boundaries (eg. sector symmetry or half sector symmetries).
+ //
+ // NOTE: rocDisplacement is used to include (or ignore) the ROC misalignment in the dz calculation
+
+ const Double_t ezField = (fgkCathodeV-fgkGG)/fgkTPCZ0; // = ALICE Electric Field (V/cm) Magnitude ~ -400 V/cm;
+
+ const Float_t gridSizeR = (fgkOFCRadius-fgkIFCRadius) / (rows-1) ;
+ const Float_t gridSizePhi = deltaphi ;
+ const Float_t gridSizeZ = fgkTPCZ0 / (columns-1) ;
+ const Float_t ratioPhi = gridSizeR*gridSizeR / (gridSizePhi*gridSizePhi) ;
+ const Float_t ratioZ = gridSizeR*gridSizeR / (gridSizeZ*gridSizeZ) ;
+
+ TMatrixD arrayE(rows,columns) ;
+
+ // Check that the number of rows and columns is suitable for a binary expansion
+ if ( !IsPowerOfTwo((rows-1)) ) {
+ AliError("Poisson3DRelaxation - Error in the number of rows. Must be 2**M - 1");
+ return; }
+ if ( !IsPowerOfTwo((columns-1)) ) {
+ AliError("Poisson3DRelaxation - Error in the number of columns. Must be 2**N - 1");
+ return; }
+ if ( phislices <= 3 ) {
+ AliError("Poisson3DRelaxation - Error in the number of phislices. Must be larger than 3");
+ return; }
+ if ( phislices > 1000 ) {
+ AliError("Poisson3D phislices > 1000 is not allowed (nor wise) ");
+ return; }
+
+ // Solve Poisson's equation in cylindrical coordinates by relaxation technique
+ // Allow for different size grid spacing in R and Z directions
+ // Use a binary expansion of the matrix to speed up the solution of the problem
+
+ Int_t loops, mplus, mminus, signplus, signminus ;
+ Int_t ione = (rows-1)/4 ;
+ Int_t jone = (columns-1)/4 ;
+ loops = TMath::Max(ione, jone) ; // Calculate the number of loops for the binary expansion
+ loops = 1 + (int) ( 0.5 + TMath::Log2((double)loops) ) ; // Solve for N in 2**N
+
+ TMatrixD* arrayofSumChargeDensities[1000] ; // Create temporary arrays to store low resolution charge arrays
+
+ for ( Int_t i = 0 ; i < phislices ; i++ ) { arrayofSumChargeDensities[i] = new TMatrixD(rows,columns) ; }
+
+ for ( Int_t count = 0 ; count < loops ; count++ ) { // START the master loop and do the binary expansion
+
+ Float_t tempgridSizeR = gridSizeR * ione ;
+ Float_t tempratioPhi = ratioPhi * ione * ione ; // Used tobe divided by ( m_one * m_one ) when m_one was != 1
+ Float_t tempratioZ = ratioZ * ione * ione / ( jone * jone ) ;
+
+ std::vector<float> coef1(rows) ; // Do this the standard C++ way to avoid gcc extensions for Float_t coef1[rows]
+ std::vector<float> coef2(rows) ; // Do this the standard C++ way to avoid gcc extensions for Float_t coef1[rows]
+ std::vector<float> coef3(rows) ; // Do this the standard C++ way to avoid gcc extensions for Float_t coef1[rows]
+ std::vector<float> coef4(rows) ; // Do this the standard C++ way to avoid gcc extensions for Float_t coef1[rows]
+
+ for ( Int_t i = ione ; i < rows-1 ; i+=ione ) {
+ Float_t radius = fgkIFCRadius + i*gridSizeR ;
+ coef1[i] = 1.0 + tempgridSizeR/(2*radius);
+ coef2[i] = 1.0 - tempgridSizeR/(2*radius);
+ coef3[i] = tempratioPhi/(radius*radius);
+ coef4[i] = 0.5 / (1.0 + tempratioZ + coef3[i]);
+ }
+
+ for ( Int_t m = 0 ; m < phislices ; m++ ) {
+ TMatrixD &chargeDensity = *arrayofChargeDensities[m] ;
+ TMatrixD &sumChargeDensity = *arrayofSumChargeDensities[m] ;
+ for ( Int_t i = ione ; i < rows-1 ; i += ione ) {
+ Float_t radius = fgkIFCRadius + i*gridSizeR ;
+ for ( Int_t j = jone ; j < columns-1 ; j += jone ) {
+ if ( ione == 1 && jone == 1 ) sumChargeDensity(i,j) = chargeDensity(i,j) ;
+ else { // Add up all enclosed charge density contributions within 1/2 unit in all directions
+ Float_t weight = 0.0 ;
+ Float_t sum = 0.0 ;
+ sumChargeDensity(i,j) = 0.0 ;
+ for ( Int_t ii = i-ione/2 ; ii <= i+ione/2 ; ii++ ) {
+ for ( Int_t jj = j-jone/2 ; jj <= j+jone/2 ; jj++ ) {
+ if ( ii == i-ione/2 || ii == i+ione/2 || jj == j-jone/2 || jj == j+jone/2 ) weight = 0.5 ;
+ else
+ weight = 1.0 ;
+ sumChargeDensity(i,j) += chargeDensity(ii,jj)*weight*radius ;
+ sum += weight*radius ;
+ }
+ }
+ sumChargeDensity(i,j) /= sum ;
+ }
+ sumChargeDensity(i,j) *= tempgridSizeR*tempgridSizeR; // just saving a step later on
+ }
+ }
+ }
+
+ for ( Int_t k = 1 ; k <= iterations; k++ ) {
+
+ // over-relaxation index, >= 1 but < 2
+ Float_t overRelax = 1.0 + TMath::Sqrt( TMath::Cos( (k*TMath::PiOver2())/iterations ) ) ;
+ Float_t overRelaxM1 = overRelax - 1.0 ;
+
+ std::vector<float> overRelaxcoef4(rows) ; // Do this the standard C++ way to avoid gcc extensions
+ std::vector<float> overRelaxcoef5(rows) ; // Do this the standard C++ way to avoid gcc extensions
+
+ for ( Int_t i = ione ; i < rows-1 ; i+=ione ) {
+ overRelaxcoef4[i] = overRelax * coef4[i] ;
+ overRelaxcoef5[i] = overRelaxM1 / overRelaxcoef4[i] ;
+ }
+
+ for ( Int_t m = 0 ; m < phislices ; m++ ) {
+
+ mplus = m + 1; signplus = 1 ;
+ mminus = m - 1 ; signminus = 1 ;
+ if (symmetry==1) { // Reflection symmetry in phi (e.g. symmetry at sector boundaries, or half sectors, etc.)
+ if ( mplus > phislices-1 ) mplus = phislices - 2 ;
+ if ( mminus < 0 ) mminus = 1 ;
+ }
+ else if (symmetry==-1) { // Anti-symmetry in phi
+ if ( mplus > phislices-1 ) { mplus = phislices - 2 ; signplus = -1 ; }
+ if ( mminus < 0 ) { mminus = 1 ; signminus = -1 ; }
+ }
+ else { // No Symmetries in phi, no boundaries, the calculation is continuous across all phi
+ if ( mplus > phislices-1 ) mplus = m + 1 - phislices ;
+ if ( mminus < 0 ) mminus = m - 1 + phislices ;
+ }
+ TMatrixD& arrayV = *arrayofArrayV[m] ;
+ TMatrixD& arrayVP = *arrayofArrayV[mplus] ;
+ TMatrixD& arrayVM = *arrayofArrayV[mminus] ;
+ TMatrixD& sumChargeDensity = *arrayofSumChargeDensities[m] ;
+
+ for ( Int_t i = ione ; i < rows-1 ; i+=ione ) {
+ for ( Int_t j = jone ; j < columns-1 ; j+=jone ) {
+
+ arrayV(i,j) = ( coef2[i] * arrayV(i-ione,j)
+ + tempratioZ * ( arrayV(i,j-jone) + arrayV(i,j+jone) )
+ - overRelaxcoef5[i] * arrayV(i,j)
+ + coef1[i] * arrayV(i+ione,j)
+ + coef3[i] * ( signplus*arrayVP(i,j) + signminus*arrayVM(i,j) )
+ + sumChargeDensity(i,j)
+ ) * overRelaxcoef4[i] ;
+ // Note: over-relax the solution at each step. This speeds up the convergance.
+
+ }
+ }
+
+ if ( k == iterations ) { // After full solution is achieved, copy low resolution solution into higher res array
+ for ( Int_t i = ione ; i < rows-1 ; i+=ione ) {
+ for ( Int_t j = jone ; j < columns-1 ; j+=jone ) {
+
+ if ( ione > 1 ) {
+ arrayV(i+ione/2,j) = ( arrayV(i+ione,j) + arrayV(i,j) ) / 2 ;
+ if ( i == ione ) arrayV(i-ione/2,j) = ( arrayV(0,j) + arrayV(ione,j) ) / 2 ;
+ }
+ if ( jone > 1 ) {
+ arrayV(i,j+jone/2) = ( arrayV(i,j+jone) + arrayV(i,j) ) / 2 ;
+ if ( j == jone ) arrayV(i,j-jone/2) = ( arrayV(i,0) + arrayV(i,jone) ) / 2 ;
+ }
+ if ( ione > 1 && jone > 1 ) {
+ arrayV(i+ione/2,j+jone/2) = ( arrayV(i+ione,j+jone) + arrayV(i,j) ) / 2 ;
+ if ( i == ione ) arrayV(i-ione/2,j-jone/2) = ( arrayV(0,j-jone) + arrayV(ione,j) ) / 2 ;
+ if ( j == jone ) arrayV(i-ione/2,j-jone/2) = ( arrayV(i-ione,0) + arrayV(i,jone) ) / 2 ;
+ // Note that this leaves a point at the upper left and lower right corners uninitialized. Not a big deal.
+ }
+ }
+ }
+ }
+
+ }
+ }
+
+ ione = ione / 2 ; if ( ione < 1 ) ione = 1 ;
+ jone = jone / 2 ; if ( jone < 1 ) jone = 1 ;
+
+ }
+
+ //Differentiate V(r) and solve for E(r) using special equations for the first and last row
+ //Integrate E(r)/E(z) from point of origin to pad plane
+
+ for ( Int_t m = 0 ; m < phislices ; m++ ) {
+ TMatrixD& arrayV = *arrayofArrayV[m] ;
+ TMatrixD& eroverEz = *arrayofEroverEz[m] ;
+
+ for ( Int_t j = columns-1 ; j >= 0 ; j-- ) { // Count backwards to facilitate integration over Z
+
+ // Differentiate in R
+ for ( Int_t i = 1 ; i < rows-1 ; i++ ) arrayE(i,j) = -1 * ( arrayV(i+1,j) - arrayV(i-1,j) ) / (2*gridSizeR) ;
+ arrayE(0,j) = -1 * ( -0.5*arrayV(2,j) + 2.0*arrayV(1,j) - 1.5*arrayV(0,j) ) / gridSizeR ;
+ arrayE(rows-1,j) = -1 * ( 1.5*arrayV(rows-1,j) - 2.0*arrayV(rows-2,j) + 0.5*arrayV(rows-3,j) ) / gridSizeR ;
+ // Integrate over Z
+ for ( Int_t i = 0 ; i < rows ; i++ ) {
+ Int_t index = 1 ; // Simpsons rule if N=odd. If N!=odd then add extra point by trapezoidal rule.
+ eroverEz(i,j) = 0.0 ;
+ for ( Int_t k = j ; k < columns ; k++ ) {
+
+ eroverEz(i,j) += index*(gridSizeZ/3.0)*arrayE(i,k)/(-1*ezField) ;
+ if ( index != 4 ) index = 4; else index = 2 ;
+ }
+ if ( index == 4 ) eroverEz(i,j) -= (gridSizeZ/3.0)*arrayE(i,columns-1)/ (-1*ezField) ;
+ if ( index == 2 ) eroverEz(i,j) +=
+ (gridSizeZ/3.0)*(0.5*arrayE(i,columns-2)-2.5*arrayE(i,columns-1))/(-1*ezField) ;
+ if ( j == columns-2 ) eroverEz(i,j) =
+ (gridSizeZ/3.0)*(1.5*arrayE(i,columns-2)+1.5*arrayE(i,columns-1))/(-1*ezField) ;
+ if ( j == columns-1 ) eroverEz(i,j) = 0.0 ;
+ }
+ }
+ // if ( m == 0 ) { TCanvas* c1 = new TCanvas("erOverEz","erOverEz",50,50,840,600) ; c1 -> cd() ;
+ // eroverEz.Draw("surf") ; } // JT test
+ }
+
+ //Differentiate V(r) and solve for E(phi)
+ //Integrate E(phi)/E(z) from point of origin to pad plane
+
+ for ( Int_t m = 0 ; m < phislices ; m++ ) {
+
+ mplus = m + 1; signplus = 1 ;
+ mminus = m - 1 ; signminus = 1 ;
+ if (symmetry==1) { // Reflection symmetry in phi (e.g. symmetry at sector boundaries, or half sectors, etc.)
+ if ( mplus > phislices-1 ) mplus = phislices - 2 ;
+ if ( mminus < 0 ) mminus = 1 ;
+ }
+ else if (symmetry==-1) { // Anti-symmetry in phi
+ if ( mplus > phislices-1 ) { mplus = phislices - 2 ; signplus = -1 ; }
+ if ( mminus < 0 ) { mminus = 1 ; signminus = -1 ; }
+ }
+ else { // No Symmetries in phi, no boundaries, the calculations is continuous across all phi
+ if ( mplus > phislices-1 ) mplus = m + 1 - phislices ;
+ if ( mminus < 0 ) mminus = m - 1 + phislices ;
+ }
+ TMatrixD &arrayVP = *arrayofArrayV[mplus] ;
+ TMatrixD &arrayVM = *arrayofArrayV[mminus] ;
+ TMatrixD &ePhioverEz = *arrayofEPhioverEz[m] ;
+ for ( Int_t j = columns-1 ; j >= 0 ; j-- ) { // Count backwards to facilitate integration over Z
+ // Differentiate in Phi
+ for ( Int_t i = 0 ; i < rows ; i++ ) {
+ Float_t radius = fgkIFCRadius + i*gridSizeR ;
+ arrayE(i,j) = -1 * (signplus * arrayVP(i,j) - signminus * arrayVM(i,j) ) / (2*radius*gridSizePhi) ;
+ }
+ // Integrate over Z
+ for ( Int_t i = 0 ; i < rows ; i++ ) {
+ Int_t index = 1 ; // Simpsons rule if N=odd. If N!=odd then add extra point by trapezoidal rule.
+ ePhioverEz(i,j) = 0.0 ;
+ for ( Int_t k = j ; k < columns ; k++ ) {
+
+ ePhioverEz(i,j) += index*(gridSizeZ/3.0)*arrayE(i,k)/(-1*ezField) ;
+ if ( index != 4 ) index = 4; else index = 2 ;
+ }
+ if ( index == 4 ) ePhioverEz(i,j) -= (gridSizeZ/3.0)*arrayE(i,columns-1)/ (-1*ezField) ;
+ if ( index == 2 ) ePhioverEz(i,j) +=
+ (gridSizeZ/3.0)*(0.5*arrayE(i,columns-2)-2.5*arrayE(i,columns-1))/(-1*ezField) ;
+ if ( j == columns-2 ) ePhioverEz(i,j) =
+ (gridSizeZ/3.0)*(1.5*arrayE(i,columns-2)+1.5*arrayE(i,columns-1))/(-1*ezField) ;
+ if ( j == columns-1 ) ePhioverEz(i,j) = 0.0 ;
+ }
+ }
+ // if ( m == 5 ) { TCanvas* c2 = new TCanvas("arrayE","arrayE",50,50,840,600) ; c2 -> cd() ;
+ // arrayE.Draw("surf") ; } // JT test
+ }
+
+
+ // Differentiate V(r) and solve for E(z) using special equations for the first and last row
+ // Integrate (E(z)-Ezstd) from point of origin to pad plane
+
+ for ( Int_t m = 0 ; m < phislices ; m++ ) {
+ TMatrixD& arrayV = *arrayofArrayV[m] ;
+ TMatrixD& deltaEz = *arrayofDeltaEz[m] ;
+
+ // Differentiate V(z) and solve for E(z) using special equations for the first and last columns
+ for ( Int_t i = 0 ; i < rows ; i++) {
+ for ( Int_t j = 1 ; j < columns-1 ; j++ ) arrayE(i,j) = -1 * ( arrayV(i,j+1) - arrayV(i,j-1) ) / (2*gridSizeZ) ;
+ arrayE(i,0) = -1 * ( -0.5*arrayV(i,2) + 2.0*arrayV(i,1) - 1.5*arrayV(i,0) ) / gridSizeZ ;
+ arrayE(i,columns-1) = -1 * ( 1.5*arrayV(i,columns-1) - 2.0*arrayV(i,columns-2) + 0.5*arrayV(i,columns-3) ) / gridSizeZ ;
+ }
+
+ for ( Int_t j = columns-1 ; j >= 0 ; j-- ) { // Count backwards to facilitate integration over Z
+ // Integrate over Z
+ for ( Int_t i = 0 ; i < rows ; i++ ) {
+ Int_t index = 1 ; // Simpsons rule if N=odd. If N!=odd then add extra point by trapezoidal rule.
+ deltaEz(i,j) = 0.0 ;
+ for ( Int_t k = j ; k < columns ; k++ ) {
+ deltaEz(i,j) += index*(gridSizeZ/3.0)*arrayE(i,k) ;
+ if ( index != 4 ) index = 4; else index = 2 ;
+ }
+ if ( index == 4 ) deltaEz(i,j) -= (gridSizeZ/3.0)*arrayE(i,columns-1) ;
+ if ( index == 2 ) deltaEz(i,j) +=
+ (gridSizeZ/3.0)*(0.5*arrayE(i,columns-2)-2.5*arrayE(i,columns-1)) ;
+ if ( j == columns-2 ) deltaEz(i,j) =
+ (gridSizeZ/3.0)*(1.5*arrayE(i,columns-2)+1.5*arrayE(i,columns-1)) ;
+ if ( j == columns-1 ) deltaEz(i,j) = 0.0 ;
+ }
+ }
+ // if ( m == 0 ) { TCanvas* c1 = new TCanvas("erOverEz","erOverEz",50,50,840,600) ; c1 -> cd() ;
+ // eroverEz.Draw("surf") ; } // JT test
+
+ // calculate z distortion from the integrated Delta Ez residuals
+ // and include the aquivalence (Volt to cm) of the ROC shift !!
+
+ for ( Int_t j = 0 ; j < columns ; j++ ) {
+ for ( Int_t i = 0 ; i < rows ; i++ ) {
+
+ // Scale the Ez distortions with the drift velocity pertubation -> delivers cm
+ deltaEz(i,j) = deltaEz(i,j)*fgkdvdE;
+
+ // ROC Potential in cm aquivalent
+ Double_t dzROCShift = arrayV(i, columns -1)/ezField;
+ if ( rocDisplacement ) deltaEz(i,j) = deltaEz(i,j) + dzROCShift; // add the ROC misaligment
+
+ }
+ }
+
+ } // end loop over phi
+
+
+
+ for ( Int_t k = 0 ; k < phislices ; k++ )
+ {
+ arrayofSumChargeDensities[k]->Delete() ;
+ }
+
+
+
+ arrayE.Clear();
+}
+
+
+Int_t AliTPCCorrection::IsPowerOfTwo(Int_t i) const {
+ //
+ // Helperfunction: Check if integer is a power of 2
+ //
+ Int_t j = 0;
+ while( i > 0 ) { j += (i&1) ; i = (i>>1) ; }
+ if ( j == 1 ) return(1) ; // True
+ return(0) ; // False
+}
+
-AliExternalTrackParam * AliTPCCorrection::FitDistortedTrack(const AliExternalTrackParam * trackIn, Double_t refX, Int_t dir,TTreeSRedirector *pcstream){
+AliExternalTrackParam * AliTPCCorrection::FitDistortedTrack(AliExternalTrackParam & trackIn, Double_t refX, Int_t dir, TTreeSRedirector * const pcstream){
//
// Fit the track parameters - without and with distortion
// 1. Space points in the TPC are simulated along the trajectory
// track1.fP[2] - sinus of local inclination angle
// track1.fP[3] - tangent of deep angle
// track1.fP[4] - 1/pt
+
AliTPCROC * roc = AliTPCROC::Instance();
const Int_t npoints0=roc->GetNRows(0)+roc->GetNRows(36);
const Double_t kRTPC0 =roc->GetPadRowRadii(0,0);
const Double_t kRTPC1 =roc->GetPadRowRadii(36,roc->GetNRows(36)-1);
-
const Double_t kMaxSnp = 0.85;
const Double_t kSigmaY=0.1;
const Double_t kSigmaZ=0.1;
+ const Double_t kMaxR=500;
+ const Double_t kMaxZ=500;
+
+ const Double_t kMaxZ0=220;
+ const Double_t kZcut=3;
const Double_t kMass = TDatabasePDG::Instance()->GetParticle("pi+")->Mass();
+ Int_t npoints1=0;
+ Int_t npoints2=0;
- AliExternalTrackParam track(*trackIn); //
+ AliExternalTrackParam track(trackIn); //
// generate points
AliTrackPointArray pointArray0(npoints0);
AliTrackPointArray pointArray1(npoints0);
Double_t xyz[3];
- AliTrackerBase::PropagateTrackTo(&track,kRTPC0,kMass,3,kTRUE,kMaxSnp);
+ if (!AliTrackerBase::PropagateTrackTo(&track,kRTPC0,kMass,5,kTRUE,kMaxSnp)) return 0;
//
// simulate the track
Int_t npoints=0;
Float_t covPoint[6]={0,0,0, kSigmaY*kSigmaY,0,kSigmaZ*kSigmaZ}; //covariance at the local frame
for (Double_t radius=kRTPC0; radius<kRTPC1; radius++){
- AliTrackerBase::PropagateTrackTo(&track,radius,kMass,3,kTRUE,kMaxSnp);
+ if (!AliTrackerBase::PropagateTrackTo(&track,radius,kMass,5,kTRUE,kMaxSnp)) return 0;
track.GetXYZ(xyz);
+ xyz[0]+=gRandom->Gaus(0,0.000005);
+ xyz[1]+=gRandom->Gaus(0,0.000005);
+ xyz[2]+=gRandom->Gaus(0,0.000005);
+ if (TMath::Abs(track.GetZ())>kMaxZ0) continue;
+ if (TMath::Abs(track.GetX())<kRTPC0) continue;
+ if (TMath::Abs(track.GetX())>kRTPC1) continue;
AliTrackPoint pIn0; // space point
AliTrackPoint pIn1;
- Int_t roc= (xyz[2]>0)? 0:18;
+ Int_t sector= (xyz[2]>0)? 0:18;
pointArray0.GetPoint(pIn0,npoints);
pointArray1.GetPoint(pIn1,npoints);
Double_t alpha = TMath::ATan2(xyz[1],xyz[0]);
Float_t distPoint[3]={xyz[0],xyz[1],xyz[2]};
- DistortPoint(distPoint, roc);
+ DistortPoint(distPoint, sector);
pIn0.SetXYZ(xyz[0], xyz[1],xyz[2]);
pIn1.SetXYZ(distPoint[0], distPoint[1],distPoint[2]);
//
npoints++;
if (npoints>=npoints0) break;
}
+ if (npoints<npoints0/4.) return 0;
//
// refit track
//
AliTrackPoint point1,point2,point3;
if (dir==1) { //make seed inner
pointArray0.GetPoint(point1,1);
- pointArray0.GetPoint(point2,10);
- pointArray0.GetPoint(point3,20);
+ pointArray0.GetPoint(point2,11);
+ pointArray0.GetPoint(point3,21);
}
if (dir==-1){ //make seed outer
- pointArray0.GetPoint(point1,npoints-20);
- pointArray0.GetPoint(point2,npoints-10);
+ pointArray0.GetPoint(point1,npoints-21);
+ pointArray0.GetPoint(point2,npoints-11);
pointArray0.GetPoint(point3,npoints-1);
- }
+ }
+ if ((TMath::Abs(point1.GetX()-point3.GetX())+TMath::Abs(point1.GetY()-point3.GetY()))<10){
+ printf("fit points not properly initialized\n");
+ return 0;
+ }
track0 = AliTrackerBase::MakeSeed(point1, point2, point3);
track1 = AliTrackerBase::MakeSeed(point1, point2, point3);
-
-
+ track0->ResetCovariance(10);
+ track1->ResetCovariance(10);
+ if (TMath::Abs(AliTrackerBase::GetBz())<0.01){
+ ((Double_t*)track0->GetParameter())[4]= trackIn.GetParameter()[4];
+ ((Double_t*)track1->GetParameter())[4]= trackIn.GetParameter()[4];
+ }
for (Int_t jpoint=0; jpoint<npoints; jpoint++){
- Int_t ipoint= (dir>0) ? ipoint: npoints-1-jpoint;
+ Int_t ipoint= (dir>0) ? jpoint: npoints-1-jpoint;
//
AliTrackPoint pIn0;
AliTrackPoint pIn1;
pointArray1.GetPoint(pIn1,ipoint);
AliTrackPoint prot0 = pIn0.Rotate(track0->GetAlpha()); // rotate to the local frame - non distoted point
AliTrackPoint prot1 = pIn1.Rotate(track1->GetAlpha()); // rotate to the local frame - distorted point
+ if (TMath::Abs(prot0.GetX())<kRTPC0) continue;
+ if (TMath::Abs(prot0.GetX())>kRTPC1) continue;
//
- AliTrackerBase::PropagateTrackTo(track0,prot0.GetX(),kMass,1,kFALSE,kMaxSnp);
- AliTrackerBase::PropagateTrackTo(track1,prot1.GetX(),kMass,1,kFALSE,kMaxSnp);
- track.GetXYZ(xyz);
+ if (!AliTrackerBase::PropagateTrackTo(track0,prot0.GetX(),kMass,5,kFALSE,kMaxSnp)) break;
+ if (!AliTrackerBase::PropagateTrackTo(track1,prot0.GetX(),kMass,5,kFALSE,kMaxSnp)) break;
+ if (TMath::Abs(track0->GetZ())>kMaxZ) break;
+ if (TMath::Abs(track0->GetX())>kMaxR) break;
+ if (TMath::Abs(track1->GetZ())>kMaxZ) break;
+ if (TMath::Abs(track1->GetX())>kMaxR) break;
+ if (dir>0 && track1->GetX()>refX) continue;
+ if (dir<0 && track1->GetX()<refX) continue;
+ if (TMath::Abs(track1->GetZ())<kZcut)continue;
+ track.GetXYZ(xyz); // distorted track also propagated to the same reference radius
//
Double_t pointPos[2]={0,0};
Double_t pointCov[3]={0,0,0};
pointCov[0]=prot0.GetCov()[3];//simay^2
pointCov[1]=prot0.GetCov()[4];//sigmayz
pointCov[2]=prot0.GetCov()[5];//sigmaz^2
- track0->Update(pointPos,pointCov);
+ if (!track0->Update(pointPos,pointCov)) break;
//
- pointPos[0]=prot1.GetY();//local y
- pointPos[1]=prot1.GetZ();//local z
+ Double_t deltaX=prot1.GetX()-prot0.GetX(); // delta X
+ Double_t deltaYX=deltaX*TMath::Tan(TMath::ASin(track1->GetSnp())); // deltaY due delta X
+ Double_t deltaZX=deltaX*track1->GetTgl(); // deltaZ due delta X
+
+ pointPos[0]=prot1.GetY()-deltaYX;//local y is sign correct? should be minus
+ pointPos[1]=prot1.GetZ()-deltaZX;//local z is sign correct? should be minus
pointCov[0]=prot1.GetCov()[3];//simay^2
pointCov[1]=prot1.GetCov()[4];//sigmayz
pointCov[2]=prot1.GetCov()[5];//sigmaz^2
- track1->Update(pointPos,pointCov);
+ if (!track1->Update(pointPos,pointCov)) break;
+ npoints1++;
+ npoints2++;
}
-
- AliTrackerBase::PropagateTrackTo(track0,refX,kMass,2.,kTRUE,kMaxSnp);
+ if (npoints2<npoints/4.) return 0;
+ AliTrackerBase::PropagateTrackTo(track0,refX,kMass,5.,kTRUE,kMaxSnp);
+ AliTrackerBase::PropagateTrackTo(track0,refX,kMass,1.,kTRUE,kMaxSnp);
track1->Rotate(track0->GetAlpha());
- AliTrackerBase::PropagateTrackTo(track1,refX,kMass,2.,kFALSE,kMaxSnp);
+ AliTrackerBase::PropagateTrackTo(track1,track0->GetX(),kMass,5.,kFALSE,kMaxSnp);
if (pcstream) (*pcstream)<<Form("fitDistort%s",GetName())<<
"point0.="<<&pointArray0<< // points
"track0.="<<track0<< // fitted track
"track1.="<<track1<< // fitted distorted track
"\n";
+ new(&trackIn) AliExternalTrackParam(*track0);
delete track0;
return track1;
}
+
+
+
+TTree* AliTPCCorrection::CreateDistortionTree(Double_t step){
+ //
+ // create the distortion tree on a mesh with granularity given by step
+ // return the tree with distortions at given position
+ // Map is created on the mesh with given step size
+ //
+ TTreeSRedirector *pcstream = new TTreeSRedirector(Form("correction%s.root",GetName()));
+ Float_t xyz[3];
+ for (Double_t x= -250; x<250; x+=step){
+ for (Double_t y= -250; y<250; y+=step){
+ Double_t r = TMath::Sqrt(x*x+y*y);
+ if (r<80) continue;
+ if (r>250) continue;
+ for (Double_t z= -250; z<250; z+=step){
+ Int_t roc=(z>0)?0:18;
+ xyz[0]=x;
+ xyz[1]=y;
+ xyz[2]=z;
+ Double_t phi = TMath::ATan2(y,x);
+ DistortPoint(xyz,roc);
+ Double_t r1 = TMath::Sqrt(xyz[0]*xyz[0]+xyz[1]*xyz[1]);
+ Double_t phi1 = TMath::ATan2(xyz[1],xyz[0]);
+ if ((phi1-phi)>TMath::Pi()) phi1-=TMath::Pi();
+ if ((phi1-phi)<-TMath::Pi()) phi1+=TMath::Pi();
+ Double_t dx = xyz[0]-x;
+ Double_t dy = xyz[1]-y;
+ Double_t dz = xyz[2]-z;
+ Double_t dr=r1-r;
+ Double_t drphi=(phi1-phi)*r;
+ (*pcstream)<<"distortion"<<
+ "x="<<x<< // original position
+ "y="<<y<<
+ "z="<<z<<
+ "r="<<r<<
+ "phi="<<phi<<
+ "x1="<<xyz[0]<< // distorted position
+ "y1="<<xyz[1]<<
+ "z1="<<xyz[2]<<
+ "r1="<<r1<<
+ "phi1="<<phi1<<
+ //
+ "dx="<<dx<< // delta position
+ "dy="<<dy<<
+ "dz="<<dz<<
+ "dr="<<dr<<
+ "drphi="<<drphi<<
+ "\n";
+ }
+ }
+ }
+ delete pcstream;
+ TFile f(Form("correction%s.root",GetName()));
+ TTree * tree = (TTree*)f.Get("distortion");
+ TTree * tree2= tree->CopyTree("1");
+ tree2->SetName(Form("dist%s",GetName()));
+ tree2->SetDirectory(0);
+ delete tree;
+ return tree2;
+}
+
+
+
+
+void AliTPCCorrection::MakeTrackDistortionTree(TTree *tinput, Int_t dtype, Int_t ptype, const TObjArray * corrArray, Int_t step, Int_t offset, Bool_t debug ){
+ //
+ // Make a fit tree:
+ // For each partial correction (specified in array) and given track topology (phi, theta, snp, refX)
+ // calculates partial distortions
+ // Partial distortion is stored in the resulting tree
+ // Output is storred in the file distortion_<dettype>_<partype>.root
+ // Partial distortion is stored with the name given by correction name
+ //
+ //
+ // Parameters of function:
+ // input - input tree
+ // dtype - distortion type 0 - ITSTPC, 1 -TPCTRD, 2 - TPCvertex , 3 - TPC-TOF, 4 - TPCTPC track crossing
+ // ppype - parameter type
+ // corrArray - array with partial corrections
+ // step - skipe entries - if 1 all entries processed - it is slow
+ // debug 0 if debug on also space points dumped - it is slow
+
+ const Double_t kMaxSnp = 0.85;
+ const Double_t kcutSnp=0.25;
+ const Double_t kcutTheta=1.;
+ const Double_t kRadiusTPC=85;
+ // AliTPCROC *tpcRoc =AliTPCROC::Instance();
+ //
+ const Double_t kMass = TDatabasePDG::Instance()->GetParticle("pi+")->Mass();
+ // const Double_t kB2C=-0.299792458e-3;
+ const Int_t kMinEntries=20;
+ Double_t phi,theta, snp, mean,rms, entries,sector,dsec;
+ Float_t refX;
+ Int_t run;
+ tinput->SetBranchAddress("run",&run);
+ tinput->SetBranchAddress("theta",&theta);
+ tinput->SetBranchAddress("phi", &phi);
+ tinput->SetBranchAddress("snp",&snp);
+ tinput->SetBranchAddress("mean",&mean);
+ tinput->SetBranchAddress("rms",&rms);
+ tinput->SetBranchAddress("entries",&entries);
+ tinput->SetBranchAddress("sector",§or);
+ tinput->SetBranchAddress("dsec",&dsec);
+ tinput->SetBranchAddress("refX",&refX);
+ TTreeSRedirector *pcstream = new TTreeSRedirector(Form("distortion%d_%d_%d.root",dtype,ptype,offset));
+ //
+ Int_t nentries=tinput->GetEntries();
+ Int_t ncorr=corrArray->GetEntries();
+ Double_t corrections[100]={0}; //
+ Double_t tPar[5];
+ Double_t cov[15]={0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+ Int_t dir=0;
+ if (dtype==5 || dtype==6) dtype=4;
+ if (dtype==0) { dir=-1;}
+ if (dtype==1) { dir=1;}
+ if (dtype==2) { dir=-1;}
+ if (dtype==3) { dir=1;}
+ if (dtype==4) { dir=-1;}
+ //
+ for (Int_t ientry=offset; ientry<nentries; ientry+=step){
+ tinput->GetEntry(ientry);
+ if (TMath::Abs(snp)>kMaxSnp) continue;
+ tPar[0]=0;
+ tPar[1]=theta*refX;
+ if (dtype==2) tPar[1]=theta*kRadiusTPC;
+ tPar[2]=snp;
+ tPar[3]=theta;
+ tPar[4]=(gRandom->Rndm()-0.5)*0.02; // should be calculated - non equal to 0
+ if (dtype==4){
+ // tracks crossing CE
+ tPar[1]=0; // track at the CE
+ //if (TMath::Abs(theta) <0.05) continue; // deep cross
+ }
+
+ if (TMath::Abs(snp) >kcutSnp) continue;
+ if (TMath::Abs(theta) >kcutTheta) continue;
+ printf("%f\t%f\t%f\t%f\t%f\t%f\n",entries, sector,theta,snp, mean,rms);
+ Double_t bz=AliTrackerBase::GetBz();
+ if (dtype !=4) { //exclude TPC - for TPC mainly non primary tracks
+ if (dtype!=2 && TMath::Abs(bz)>0.1 ) tPar[4]=snp/(refX*bz*kB2C*2);
+
+ if (dtype==2 && TMath::Abs(bz)>0.1 ) {
+ tPar[4]=snp/(kRadiusTPC*bz*kB2C*2);//
+ // snp at the TPC inner radius in case the vertex match used
+ }
+ }
+ //
+ tPar[4]+=(gRandom->Rndm()-0.5)*0.02;
+ AliExternalTrackParam track(refX,phi,tPar,cov);
+ Double_t xyz[3];
+ track.GetXYZ(xyz);
+ Int_t id=0;
+ Double_t pt=1./tPar[4];
+ Double_t dRrec=0; // dummy value - needed for points - e.g for laser
+ //if (ptype==4 &&bz<0) mean*=-1; // interpret as curvature -- COMMENTED out - in lookup signed 1/pt used
+ Double_t refXD=refX;
+ (*pcstream)<<"fit"<<
+ "run="<<run<< // run number
+ "bz="<<bz<< // magnetic filed used
+ "dtype="<<dtype<< // detector match type
+ "ptype="<<ptype<< // parameter type
+ "theta="<<theta<< // theta
+ "phi="<<phi<< // phi
+ "snp="<<snp<< // snp
+ "mean="<<mean<< // mean dist value
+ "rms="<<rms<< // rms
+ "sector="<<sector<<
+ "dsec="<<dsec<<
+ "refX="<<refXD<< // referece X as double
+ "gx="<<xyz[0]<< // global position at reference
+ "gy="<<xyz[1]<< // global position at reference
+ "gz="<<xyz[2]<< // global position at reference
+ "dRrec="<<dRrec<< // delta Radius in reconstruction
+ "pt="<<pt<< // pt
+ "id="<<id<< // track id
+ "entries="<<entries;// number of entries in bin
+ //
+ Bool_t isOK=kTRUE;
+ if (entries<kMinEntries) isOK=kFALSE;
+ //
+ if (dtype!=4) for (Int_t icorr=0; icorr<ncorr; icorr++) {
+ AliTPCCorrection *corr = (AliTPCCorrection*)corrArray->At(icorr);
+ corrections[icorr]=0;
+ if (entries>kMinEntries){
+ AliExternalTrackParam trackIn(refX,phi,tPar,cov);
+ AliExternalTrackParam *trackOut = 0;
+ if (debug) trackOut=corr->FitDistortedTrack(trackIn, refX, dir,pcstream);
+ if (!debug) trackOut=corr->FitDistortedTrack(trackIn, refX, dir,0);
+ if (dtype==0) {dir= -1;}
+ if (dtype==1) {dir= 1;}
+ if (dtype==2) {dir= -1;}
+ if (dtype==3) {dir= 1;}
+ //
+ if (trackOut){
+ if (!AliTrackerBase::PropagateTrackTo(&trackIn,refX,kMass,5,kTRUE,kMaxSnp)) isOK=kFALSE;
+ if (!trackOut->Rotate(trackIn.GetAlpha())) isOK=kFALSE;
+ if (!AliTrackerBase::PropagateTrackTo(trackOut,trackIn.GetX(),kMass,5,kFALSE,kMaxSnp)) isOK=kFALSE;
+ // trackOut->PropagateTo(trackIn.GetX(),AliTrackerBase::GetBz());
+ //
+ corrections[icorr]= trackOut->GetParameter()[ptype]-trackIn.GetParameter()[ptype];
+ delete trackOut;
+ }else{
+ corrections[icorr]=0;
+ isOK=kFALSE;
+ }
+ //if (ptype==4 &&bz<0) corrections[icorr]*=-1; // interpret as curvature - commented out
+ }
+ (*pcstream)<<"fit"<<
+ Form("%s=",corr->GetName())<<corrections[icorr]; // dump correction value
+ }
+
+ if (dtype==4) for (Int_t icorr=0; icorr<ncorr; icorr++) {
+ //
+ // special case of the TPC tracks crossing the CE
+ //
+ AliTPCCorrection *corr = (AliTPCCorrection*)corrArray->At(icorr);
+ corrections[icorr]=0;
+ if (entries>kMinEntries){
+ AliExternalTrackParam trackIn0(refX,phi,tPar,cov); //Outer - direction to vertex
+ AliExternalTrackParam trackIn1(refX,phi,tPar,cov); //Inner - direction magnet
+ AliExternalTrackParam *trackOut0 = 0;
+ AliExternalTrackParam *trackOut1 = 0;
+ //
+ if (debug) trackOut0=corr->FitDistortedTrack(trackIn0, refX, dir,pcstream);
+ if (!debug) trackOut0=corr->FitDistortedTrack(trackIn0, refX, dir,0);
+ if (debug) trackOut1=corr->FitDistortedTrack(trackIn1, refX, -dir,pcstream);
+ if (!debug) trackOut1=corr->FitDistortedTrack(trackIn1, refX, -dir,0);
+ //
+ if (trackOut0 && trackOut1){
+ if (!AliTrackerBase::PropagateTrackTo(&trackIn0,refX,kMass,5,kTRUE,kMaxSnp)) isOK=kFALSE;
+ if (!AliTrackerBase::PropagateTrackTo(&trackIn0,refX,kMass,1,kFALSE,kMaxSnp)) isOK=kFALSE;
+ if (!trackOut0->Rotate(trackIn0.GetAlpha())) isOK=kFALSE;
+ if (!AliTrackerBase::PropagateTrackTo(trackOut0,trackIn0.GetX(),kMass,5,kFALSE,kMaxSnp)) isOK=kFALSE;
+ //
+ if (!AliTrackerBase::PropagateTrackTo(&trackIn1,refX,kMass,5,kTRUE,kMaxSnp)) isOK=kFALSE;
+ if (!trackIn1.Rotate(trackIn0.GetAlpha())) isOK=kFALSE;
+ if (!AliTrackerBase::PropagateTrackTo(&trackIn1,trackIn0.GetX(),kMass,1,kFALSE,kMaxSnp)) isOK=kFALSE;
+ if (!trackOut1->Rotate(trackIn1.GetAlpha())) isOK=kFALSE;
+ if (!AliTrackerBase::PropagateTrackTo(trackOut1,trackIn1.GetX(),kMass,5,kFALSE,kMaxSnp)) isOK=kFALSE;
+ //
+ corrections[icorr] = (trackOut0->GetParameter()[ptype]-trackIn0.GetParameter()[ptype]);
+ corrections[icorr]-= (trackOut1->GetParameter()[ptype]-trackIn1.GetParameter()[ptype]);
+ if (isOK)
+ if ((TMath::Abs(trackOut0->GetX()-trackOut1->GetX())>0.1)||
+ (TMath::Abs(trackOut0->GetX()-trackIn1.GetX())>0.1)||
+ (TMath::Abs(trackOut0->GetAlpha()-trackOut1->GetAlpha())>0.00001)||
+ (TMath::Abs(trackOut0->GetAlpha()-trackIn1.GetAlpha())>0.00001)||
+ (TMath::Abs(trackIn0.GetTgl()-trackIn1.GetTgl())>0.0001)||
+ (TMath::Abs(trackIn0.GetSnp()-trackIn1.GetSnp())>0.0001)
+ ){
+ isOK=kFALSE;
+ }
+ delete trackOut0;
+ delete trackOut1;
+ }else{
+ corrections[icorr]=0;
+ isOK=kFALSE;
+ }
+ //
+ //if (ptype==4 &&bz<0) corrections[icorr]*=-1; // interpret as curvature - commented out no in lookup
+ }
+ (*pcstream)<<"fit"<<
+ Form("%s=",corr->GetName())<<corrections[icorr]; // dump correction value
+ }
+ //
+ (*pcstream)<<"fit"<<"isOK="<<isOK<<"\n";
+ }
+
+
+ delete pcstream;
+}
+
+
+
+void AliTPCCorrection::MakeSectorDistortionTree(TTree *tinput, Int_t dtype, Int_t ptype, const TObjArray * corrArray, Int_t step, Int_t offset, Bool_t debug ){
+ //
+ // Make a fit tree:
+ // For each partial correction (specified in array) and given track topology (phi, theta, snp, refX)
+ // calculates partial distortions
+ // Partial distortion is stored in the resulting tree
+ // Output is storred in the file distortion_<dettype>_<partype>.root
+ // Partial distortion is stored with the name given by correction name
+ //
+ //
+ // Parameters of function:
+ // input - input tree
+ // dtype - distortion type 10 - IROC-OROC
+ // ppype - parameter type
+ // corrArray - array with partial corrections
+ // step - skipe entries - if 1 all entries processed - it is slow
+ // debug 0 if debug on also space points dumped - it is slow
+
+ const Double_t kMaxSnp = 0.8;
+ const Int_t kMinEntries=200;
+ // AliTPCROC *tpcRoc =AliTPCROC::Instance();
+ //
+ const Double_t kMass = TDatabasePDG::Instance()->GetParticle("pi+")->Mass();
+ // const Double_t kB2C=-0.299792458e-3;
+ Double_t phi,theta, snp, mean,rms, entries,sector,dsec,globalZ;
+ Int_t isec1, isec0;
+ Double_t refXD;
+ Float_t refX;
+ Int_t run;
+ tinput->SetBranchAddress("run",&run);
+ tinput->SetBranchAddress("theta",&theta);
+ tinput->SetBranchAddress("phi", &phi);
+ tinput->SetBranchAddress("snp",&snp);
+ tinput->SetBranchAddress("mean",&mean);
+ tinput->SetBranchAddress("rms",&rms);
+ tinput->SetBranchAddress("entries",&entries);
+ tinput->SetBranchAddress("sector",§or);
+ tinput->SetBranchAddress("dsec",&dsec);
+ tinput->SetBranchAddress("refX",&refXD);
+ tinput->SetBranchAddress("z",&globalZ);
+ tinput->SetBranchAddress("isec0",&isec0);
+ tinput->SetBranchAddress("isec1",&isec1);
+ TTreeSRedirector *pcstream = new TTreeSRedirector(Form("distortionSector%d_%d_%d.root",dtype,ptype,offset));
+ //
+ Int_t nentries=tinput->GetEntries();
+ Int_t ncorr=corrArray->GetEntries();
+ Double_t corrections[100]={0}; //
+ Double_t tPar[5];
+ Double_t cov[15]={0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+ Int_t dir=0;
+ //
+ for (Int_t ientry=offset; ientry<nentries; ientry+=step){
+ tinput->GetEntry(ientry);
+ refX=refXD;
+ Int_t id=-1;
+ if (TMath::Abs(TMath::Abs(isec0%18)-TMath::Abs(isec1%18))==0) id=1; // IROC-OROC - opposite side
+ if (TMath::Abs(TMath::Abs(isec0%36)-TMath::Abs(isec1%36))==0) id=2; // IROC-OROC - same side
+ if (dtype==10 && id==-1) continue;
+ //
+ dir=-1;
+ tPar[0]=0;
+ tPar[1]=globalZ;
+ tPar[2]=snp;
+ tPar[3]=theta;
+ tPar[4]=(gRandom->Rndm()-0.1)*0.2; //
+ Double_t pt=1./tPar[4];
+ //
+ printf("%f\t%f\t%f\t%f\t%f\t%f\n",entries, sector,theta,snp, mean,rms);
+ Double_t bz=AliTrackerBase::GetBz();
+ AliExternalTrackParam track(refX,phi,tPar,cov);
+ Double_t xyz[3],xyzIn[3],xyzOut[3];
+ track.GetXYZ(xyz);
+ track.GetXYZAt(85,bz,xyzIn);
+ track.GetXYZAt(245,bz,xyzOut);
+ Double_t phiIn = TMath::ATan2(xyzIn[1],xyzIn[0]);
+ Double_t phiOut = TMath::ATan2(xyzOut[1],xyzOut[0]);
+ Double_t phiRef = TMath::ATan2(xyz[1],xyz[0]);
+ Int_t sectorRef = TMath::Nint(9.*phiRef/TMath::Pi()-0.5);
+ Int_t sectorIn = TMath::Nint(9.*phiIn/TMath::Pi()-0.5);
+ Int_t sectorOut = TMath::Nint(9.*phiOut/TMath::Pi()-0.5);
+ //
+ Bool_t isOK=kTRUE;
+ if (sectorIn!=sectorOut) isOK=kFALSE; // requironment - cluster in the same sector
+ if (sectorIn!=sectorRef) isOK=kFALSE; // requironment - cluster in the same sector
+ if (entries<kMinEntries/(1+TMath::Abs(globalZ/100.))) isOK=kFALSE; // requironment - minimal amount of tracks in bin
+ // Do downscale
+ if (TMath::Abs(theta)>1) isOK=kFALSE;
+ //
+ Double_t dRrec=0; // dummy value - needed for points - e.g for laser
+ //
+ (*pcstream)<<"fit"<<
+ "run="<<run<< //run
+ "bz="<<bz<< // magnetic filed used
+ "dtype="<<dtype<< // detector match type
+ "ptype="<<ptype<< // parameter type
+ "theta="<<theta<< // theta
+ "phi="<<phi<< // phi
+ "snp="<<snp<< // snp
+ "mean="<<mean<< // mean dist value
+ "rms="<<rms<< // rms
+ "sector="<<sector<<
+ "dsec="<<dsec<<
+ "refX="<<refXD<< // referece X
+ "gx="<<xyz[0]<< // global position at reference
+ "gy="<<xyz[1]<< // global position at reference
+ "gz="<<xyz[2]<< // global position at reference
+ "dRrec="<<dRrec<< // delta Radius in reconstruction
+ "pt="<<pt<< //pt
+ "id="<<id<< // track id
+ "entries="<<entries;// number of entries in bin
+ //
+ AliExternalTrackParam *trackOut0 = 0;
+ AliExternalTrackParam *trackOut1 = 0;
+ AliExternalTrackParam *ptrackIn0 = 0;
+ AliExternalTrackParam *ptrackIn1 = 0;
+
+ for (Int_t icorr=0; icorr<ncorr; icorr++) {
+ //
+ // special case of the TPC tracks crossing the CE
+ //
+ AliTPCCorrection *corr = (AliTPCCorrection*)corrArray->At(icorr);
+ corrections[icorr]=0;
+ if (entries>kMinEntries &&isOK){
+ AliExternalTrackParam trackIn0(refX,phi,tPar,cov);
+ AliExternalTrackParam trackIn1(refX,phi,tPar,cov);
+ ptrackIn1=&trackIn0;
+ ptrackIn0=&trackIn1;
+ //
+ if (debug) trackOut0=corr->FitDistortedTrack(trackIn0, refX, dir,pcstream);
+ if (!debug) trackOut0=corr->FitDistortedTrack(trackIn0, refX, dir,0);
+ if (debug) trackOut1=corr->FitDistortedTrack(trackIn1, refX, -dir,pcstream);
+ if (!debug) trackOut1=corr->FitDistortedTrack(trackIn1, refX, -dir,0);
+ //
+ if (trackOut0 && trackOut1){
+ //
+ if (!AliTrackerBase::PropagateTrackTo(&trackIn0,refX,kMass,1,kTRUE,kMaxSnp)) isOK=kFALSE;
+ if (!AliTrackerBase::PropagateTrackTo(&trackIn0,refX,kMass,1,kFALSE,kMaxSnp)) isOK=kFALSE;
+ // rotate all tracks to the same frame
+ if (!trackOut0->Rotate(trackIn0.GetAlpha())) isOK=kFALSE;
+ if (!trackIn1.Rotate(trackIn0.GetAlpha())) isOK=kFALSE;
+ if (!trackOut1->Rotate(trackIn0.GetAlpha())) isOK=kFALSE;
+ //
+ if (!AliTrackerBase::PropagateTrackTo(trackOut0,refX,kMass,1,kFALSE,kMaxSnp)) isOK=kFALSE;
+ if (!AliTrackerBase::PropagateTrackTo(&trackIn1,refX,kMass,1,kFALSE,kMaxSnp)) isOK=kFALSE;
+ if (!AliTrackerBase::PropagateTrackTo(trackOut1,refX,kMass,1,kFALSE,kMaxSnp)) isOK=kFALSE;
+ //
+ corrections[icorr] = (trackOut0->GetParameter()[ptype]-trackIn0.GetParameter()[ptype]);
+ corrections[icorr]-= (trackOut1->GetParameter()[ptype]-trackIn1.GetParameter()[ptype]);
+ (*pcstream)<<"fitDebug"<< // just to debug the correction
+ "mean="<<mean<<
+ "pIn0.="<<ptrackIn0<<
+ "pIn1.="<<ptrackIn1<<
+ "pOut0.="<<trackOut0<<
+ "pOut1.="<<trackOut1<<
+ "refX="<<refXD<<
+ "\n";
+ delete trackOut0;
+ delete trackOut1;
+ }else{
+ corrections[icorr]=0;
+ isOK=kFALSE;
+ }
+ }
+ (*pcstream)<<"fit"<<
+ Form("%s=",corr->GetName())<<corrections[icorr]; // dump correction value
+ }
+ //
+ (*pcstream)<<"fit"<<"isOK="<<isOK<<"\n";
+ }
+ delete pcstream;
+}
+
+
+
+void AliTPCCorrection::MakeLaserDistortionTreeOld(TTree* tree, TObjArray *corrArray, Int_t itype){
+ //
+ // Make a laser fit tree for global minimization
+ //
+ const Double_t cutErrY=0.1;
+ const Double_t cutErrZ=0.1;
+ const Double_t kEpsilon=0.00000001;
+ const Double_t kMaxDist=1.; // max distance - space correction
+ const Double_t kMaxRMS=0.05; // max distance -between point and local mean
+ TVectorD *vecdY=0;
+ TVectorD *vecdZ=0;
+ TVectorD *veceY=0;
+ TVectorD *veceZ=0;
+ AliTPCLaserTrack *ltr=0;
+ AliTPCLaserTrack::LoadTracks();
+ tree->SetBranchAddress("dY.",&vecdY);
+ tree->SetBranchAddress("dZ.",&vecdZ);
+ tree->SetBranchAddress("eY.",&veceY);
+ tree->SetBranchAddress("eZ.",&veceZ);
+ tree->SetBranchAddress("LTr.",<r);
+ Int_t entries= tree->GetEntries();
+ TTreeSRedirector *pcstream= new TTreeSRedirector("distortionLaser_0.root");
+ Double_t bz=AliTrackerBase::GetBz();
+ //
+
+ for (Int_t ientry=0; ientry<entries; ientry++){
+ tree->GetEntry(ientry);
+ if (!ltr->GetVecGX()){
+ ltr->UpdatePoints();
+ }
+ TVectorD * delta= (itype==0)? vecdY:vecdZ;
+ TVectorD * err= (itype==0)? veceY:veceZ;
+ TLinearFitter fitter(2,"pol1");
+ for (Int_t iter=0; iter<2; iter++){
+ Double_t kfit0=0, kfit1=0;
+ Int_t npoints=fitter.GetNpoints();
+ if (npoints>80){
+ fitter.Eval();
+ kfit0=fitter.GetParameter(0);
+ kfit1=fitter.GetParameter(1);
+ }
+ for (Int_t irow=0; irow<159; irow++){
+ Bool_t isOK=kTRUE;
+ Int_t isOKF=0;
+ Int_t nentries = 1000;
+ if (veceY->GetMatrixArray()[irow]>cutErrY||veceZ->GetMatrixArray()[irow]>cutErrZ) nentries=0;
+ if (veceY->GetMatrixArray()[irow]<kEpsilon||veceZ->GetMatrixArray()[irow]<kEpsilon) nentries=0;
+ Int_t dtype=5;
+ Double_t array[10];
+ Int_t first3=TMath::Max(irow-3,0);
+ Int_t last3 =TMath::Min(irow+3,159);
+ Int_t counter=0;
+ if ((*ltr->GetVecSec())[irow]>=0 && err) {
+ for (Int_t jrow=first3; jrow<=last3; jrow++){
+ if ((*ltr->GetVecSec())[irow]!= (*ltr->GetVecSec())[jrow]) continue;
+ if ((*err)[jrow]<kEpsilon) continue;
+ array[counter]=(*delta)[jrow];
+ counter++;
+ }
+ }
+ Double_t rms3 = 0;
+ Double_t mean3 = 0;
+ if (counter>2){
+ rms3 = TMath::RMS(counter,array);
+ mean3 = TMath::Mean(counter,array);
+ }else{
+ isOK=kFALSE;
+ }
+ Double_t phi =(*ltr->GetVecPhi())[irow];
+ Double_t theta =ltr->GetTgl();
+ Double_t mean=delta->GetMatrixArray()[irow];
+ Double_t gx=0,gy=0,gz=0;
+ Double_t snp = (*ltr->GetVecP2())[irow];
+ Double_t dRrec=0;
+ // Double_t rms = err->GetMatrixArray()[irow];
+ //
+ gx = (*ltr->GetVecGX())[irow];
+ gy = (*ltr->GetVecGY())[irow];
+ gz = (*ltr->GetVecGZ())[irow];
+ //
+ // get delta R used in reconstruction
+ AliTPCcalibDB* calib=AliTPCcalibDB::Instance();
+ AliTPCCorrection * correction = calib->GetTPCComposedCorrection(AliTrackerBase::GetBz());
+ // const AliTPCRecoParam * recoParam = calib->GetTransform()->GetCurrentRecoParam();
+ //Double_t xyz0[3]={gx,gy,gz};
+ Double_t oldR=TMath::Sqrt(gx*gx+gy*gy);
+ Double_t fphi = TMath::ATan2(gy,gx);
+ Double_t fsector = 9.*fphi/TMath::Pi();
+ if (fsector<0) fsector+=18;
+ Double_t dsec = fsector-Int_t(fsector)-0.5;
+ Double_t refX=0;
+ Int_t id= ltr->GetId();
+ Double_t pt=0;
+ //
+ if (1 && oldR>1) {
+ Float_t xyz1[3]={gx,gy,gz};
+ Int_t sector=(gz>0)?0:18;
+ correction->CorrectPoint(xyz1, sector);
+ refX=TMath::Sqrt(xyz1[0]*xyz1[0]+xyz1[1]*xyz1[1]);
+ dRrec=oldR-refX;
+ }
+ if (TMath::Abs(rms3)>kMaxRMS) isOK=kFALSE;
+ if (TMath::Abs(mean-mean3)>kMaxRMS) isOK=kFALSE;
+ if (counter<4) isOK=kFALSE;
+ if (npoints<90) isOK=kFALSE;
+ if (isOK){
+ fitter.AddPoint(&refX,mean);
+ }
+ Double_t deltaF=kfit0+kfit1*refX;
+ if (iter==1){
+ (*pcstream)<<"fitFull"<< // dumpe also intermediate results
+ "bz="<<bz<< // magnetic filed used
+ "dtype="<<dtype<< // detector match type
+ "ptype="<<itype<< // parameter type
+ "theta="<<theta<< // theta
+ "phi="<<phi<< // phi
+ "snp="<<snp<< // snp
+ "mean="<<mean3<< // mean dist value
+ "rms="<<rms3<< // rms
+ "deltaF="<<deltaF<<
+ "npoints="<<npoints<< //number of points
+ "mean3="<<mean3<< // mean dist value
+ "rms3="<<rms3<< // rms
+ "counter="<<counter<<
+ "sector="<<fsector<<
+ "dsec="<<dsec<<
+ //
+ "refX="<<refX<< // reference radius
+ "gx="<<gx<< // global position
+ "gy="<<gy<< // global position
+ "gz="<<gz<< // global position
+ "dRrec="<<dRrec<< // delta Radius in reconstruction
+ "id="<<id<< //bundle
+ "entries="<<nentries<<// number of entries in bin
+ "\n";
+ }
+ if (iter==1) (*pcstream)<<"fit"<< // dump valus for fit
+ "bz="<<bz<< // magnetic filed used
+ "dtype="<<dtype<< // detector match type
+ "ptype="<<itype<< // parameter type
+ "theta="<<theta<< // theta
+ "phi="<<phi<< // phi
+ "snp="<<snp<< // snp
+ "mean="<<mean3<< // mean dist value
+ "rms="<<rms3<< // rms
+ "sector="<<fsector<<
+ "dsec="<<dsec<<
+ //
+ "refX="<<refX<< // reference radius
+ "gx="<<gx<< // global position
+ "gy="<<gy<< // global position
+ "gz="<<gz<< // global position
+ "dRrec="<<dRrec<< // delta Radius in reconstruction
+ "pt="<<pt<< //pt
+ "id="<<id<< //bundle
+ "entries="<<nentries;// number of entries in bin
+ //
+ //
+ Double_t ky = TMath::Tan(TMath::ASin(snp));
+ Int_t ncorr = corrArray->GetEntries();
+ Double_t r0 = TMath::Sqrt(gx*gx+gy*gy);
+ Double_t phi0 = TMath::ATan2(gy,gx);
+ Double_t distortions[1000]={0};
+ Double_t distortionsR[1000]={0};
+ if (iter==1){
+ for (Int_t icorr=0; icorr<ncorr; icorr++) {
+ AliTPCCorrection *corr = (AliTPCCorrection*)corrArray->At(icorr);
+ Float_t distPoint[3]={gx,gy,gz};
+ Int_t sector= (gz>0)? 0:18;
+ if (r0>80){
+ corr->DistortPoint(distPoint, sector);
+ }
+ // Double_t value=distPoint[2]-gz;
+ if (itype==0 && r0>1){
+ Double_t r1 = TMath::Sqrt(distPoint[0]*distPoint[0]+distPoint[1]*distPoint[1]);
+ Double_t phi1 = TMath::ATan2(distPoint[1],distPoint[0]);
+ Double_t drphi= r0*(phi1-phi0);
+ Double_t dr = r1-r0;
+ distortions[icorr] = drphi-ky*dr;
+ distortionsR[icorr] = dr;
+ }
+ if (TMath::Abs(distortions[icorr])>kMaxDist) {isOKF=icorr+1; isOK=kFALSE; }
+ if (TMath::Abs(distortionsR[icorr])>kMaxDist) {isOKF=icorr+1; isOK=kFALSE;}
+ (*pcstream)<<"fit"<<
+ Form("%s=",corr->GetName())<<distortions[icorr]; // dump correction value
+ }
+ (*pcstream)<<"fit"<<"isOK="<<isOK<<"\n";
+ }
+ }
+ }
+ }
+ delete pcstream;
+}
+
+
+
+void AliTPCCorrection::MakeDistortionMap(THnSparse * his0, TTreeSRedirector * const pcstream, const char* hname, Int_t run, Float_t refX, Int_t type, Int_t integ){
+ //
+ // make a distortion map out ou fthe residual histogram
+ // Results are written to the debug streamer - pcstream
+ // Parameters:
+ // his0 - input (4D) residual histogram
+ // pcstream - file to write the tree
+ // run - run number
+ // refX - track matching reference X
+ // type - 0- y 1-z,2 -snp, 3-theta, 4=1/pt
+ // THnSparse axes:
+ // OBJ: TAxis #Delta #Delta
+ // OBJ: TAxis tanTheta tan(#Theta)
+ // OBJ: TAxis phi #phi
+ // OBJ: TAxis snp snp
+
+ // marian.ivanov@cern.ch
+ const Int_t kMinEntries=10;
+ Double_t bz=AliTrackerBase::GetBz();
+ Int_t idim[4]={0,1,2,3};
+ //
+ //
+ //
+ Int_t nbins3=his0->GetAxis(3)->GetNbins();
+ Int_t first3=his0->GetAxis(3)->GetFirst();
+ Int_t last3 =his0->GetAxis(3)->GetLast();
+ //
+ for (Int_t ibin3=first3; ibin3<last3; ibin3+=1){ // axis 3 - local angle
+ his0->GetAxis(3)->SetRange(TMath::Max(ibin3-integ,1),TMath::Min(ibin3+integ,nbins3));
+ Double_t x3= his0->GetAxis(3)->GetBinCenter(ibin3);
+ THnSparse * his3= his0->Projection(3,idim); //projected histogram according selection 3
+ //
+ Int_t nbins2 = his3->GetAxis(2)->GetNbins();
+ Int_t first2 = his3->GetAxis(2)->GetFirst();
+ Int_t last2 = his3->GetAxis(2)->GetLast();
+ //
+ for (Int_t ibin2=first2; ibin2<last2; ibin2+=1){ // axis 2 - phi
+ his3->GetAxis(2)->SetRange(TMath::Max(ibin2-integ,1),TMath::Min(ibin2+integ,nbins2));
+ Double_t x2= his3->GetAxis(2)->GetBinCenter(ibin2);
+ THnSparse * his2= his3->Projection(2,idim); //projected histogram according selection 2
+ Int_t nbins1 = his2->GetAxis(1)->GetNbins();
+ Int_t first1 = his2->GetAxis(1)->GetFirst();
+ Int_t last1 = his2->GetAxis(1)->GetLast();
+ for (Int_t ibin1=first1; ibin1<last1; ibin1++){ //axis 1 - theta
+ //
+ Double_t x1= his2->GetAxis(1)->GetBinCenter(ibin1);
+ his2->GetAxis(1)->SetRange(TMath::Max(ibin1-1,1),TMath::Min(ibin1+1,nbins1));
+ if (TMath::Abs(x1)<0.1){
+ if (x1<0) his2->GetAxis(1)->SetRange(TMath::Max(ibin1-1,1),TMath::Min(ibin1,nbins1));
+ if (x1>0) his2->GetAxis(1)->SetRange(TMath::Max(ibin1,1),TMath::Min(ibin1+1,nbins1));
+ }
+ if (TMath::Abs(x1)<0.06){
+ his2->GetAxis(1)->SetRange(TMath::Max(ibin1,1),TMath::Min(ibin1,nbins1));
+ }
+ TH1 * hisDelta = his2->Projection(0);
+ //
+ Double_t entries = hisDelta->GetEntries();
+ Double_t mean=0, rms=0;
+ if (entries>kMinEntries){
+ mean = hisDelta->GetMean();
+ rms = hisDelta->GetRMS();
+ }
+ Double_t sector = 9.*x2/TMath::Pi();
+ if (sector<0) sector+=18;
+ Double_t dsec = sector-Int_t(sector)-0.5;
+ Double_t z=refX*x1;
+ (*pcstream)<<hname<<
+ "run="<<run<<
+ "bz="<<bz<<
+ "theta="<<x1<<
+ "phi="<<x2<<
+ "z="<<z<< // dummy z
+ "snp="<<x3<<
+ "entries="<<entries<<
+ "mean="<<mean<<
+ "rms="<<rms<<
+ "refX="<<refX<< // track matching refernce plane
+ "type="<<type<< //
+ "sector="<<sector<<
+ "dsec="<<dsec<<
+ "\n";
+ delete hisDelta;
+ //printf("%f\t%f\t%f\t%f\t%f\n",x3,x2,x1, entries,mean);
+ }
+ delete his2;
+ }
+ delete his3;
+ }
+}
+
+
+
+
+void AliTPCCorrection::MakeDistortionMapCosmic(THnSparse * hisInput, TTreeSRedirector * const pcstream, const char* hname, Int_t run, Float_t refX, Int_t type){
+ //
+ // make a distortion map out ou fthe residual histogram
+ // Results are written to the debug streamer - pcstream
+ // Parameters:
+ // his0 - input (4D) residual histogram
+ // pcstream - file to write the tree
+ // run - run number
+ // refX - track matching reference X
+ // type - 0- y 1-z,2 -snp, 3-theta, 4=1/pt
+ // marian.ivanov@cern.ch
+ //
+ // Histo axeses
+ // Collection name='TObjArray', class='TObjArray', size=16
+ // 0. OBJ: TAxis #Delta #Delta
+ // 1. OBJ: TAxis N_{cl} N_{cl}
+ // 2. OBJ: TAxis dca_{r} (cm) dca_{r} (cm)
+ // 3. OBJ: TAxis z (cm) z (cm)
+ // 4. OBJ: TAxis sin(#phi) sin(#phi)
+ // 5. OBJ: TAxis tan(#theta) tan(#theta)
+ // 6. OBJ: TAxis 1/pt (1/GeV) 1/pt (1/GeV)
+ // 7. OBJ: TAxis pt (GeV) pt (GeV)
+ // 8. OBJ: TAxis alpha alpha
+ const Int_t kMinEntries=10;
+ //
+ // 1. make default selections
+ //
+ TH1 * hisDelta=0;
+ Int_t idim0[4]={0 , 5, 8, 3}; // delta, theta, alpha, z
+ hisInput->GetAxis(1)->SetRangeUser(110,190); //long tracks
+ hisInput->GetAxis(2)->SetRangeUser(-10,35); //tracks close to beam pipe
+ hisInput->GetAxis(4)->SetRangeUser(-0.3,0.3); //small snp at TPC entrance
+ hisInput->GetAxis(7)->SetRangeUser(3,100); //"high pt tracks"
+ hisDelta= hisInput->Projection(0);
+ hisInput->GetAxis(0)->SetRangeUser(-6.*hisDelta->GetRMS(), +6.*hisDelta->GetRMS());
+ delete hisDelta;
+ THnSparse *his0= hisInput->Projection(4,idim0);
+ //
+ // 2. Get mean in diferent bins
+ //
+ Int_t nbins1=his0->GetAxis(1)->GetNbins();
+ Int_t first1=his0->GetAxis(1)->GetFirst();
+ Int_t last1 =his0->GetAxis(1)->GetLast();
+ //
+ Double_t bz=AliTrackerBase::GetBz();
+ Int_t idim[4]={0,1, 2, 3}; // delta, theta,alpha,z
+ //
+ for (Int_t ibin1=first1; ibin1<=last1; ibin1++){ //axis 1 - theta
+ //
+ Double_t x1= his0->GetAxis(1)->GetBinCenter(ibin1);
+ his0->GetAxis(1)->SetRange(TMath::Max(ibin1-1,1),TMath::Min(ibin1+1,nbins1));
+ //
+ THnSparse * his1 = his0->Projection(4,idim); // projected histogram according range1
+ Int_t nbins3 = his1->GetAxis(3)->GetNbins();
+ Int_t first3 = his1->GetAxis(3)->GetFirst();
+ Int_t last3 = his1->GetAxis(3)->GetLast();
+ //
+ for (Int_t ibin3=first3-1; ibin3<=last3; ibin3+=1){ // axis 3 - z at "vertex"
+ his1->GetAxis(3)->SetRange(TMath::Max(ibin3-1,1),TMath::Min(ibin3+1,nbins3));
+ Double_t x3= his1->GetAxis(3)->GetBinCenter(ibin3);
+ if (ibin3<first3) {
+ his1->GetAxis(3)->SetRangeUser(-1,1);
+ x3=0;
+ }
+ THnSparse * his3= his1->Projection(4,idim); //projected histogram according selection 3
+ Int_t nbins2 = his3->GetAxis(2)->GetNbins();
+ Int_t first2 = his3->GetAxis(2)->GetFirst();
+ Int_t last2 = his3->GetAxis(2)->GetLast();
+ //
+ for (Int_t ibin2=first2; ibin2<=last2; ibin2+=1){
+ his3->GetAxis(2)->SetRange(TMath::Max(ibin2-1,1),TMath::Min(ibin2+1,nbins2));
+ Double_t x2= his3->GetAxis(2)->GetBinCenter(ibin2);
+ hisDelta = his3->Projection(0);
+ //
+ Double_t entries = hisDelta->GetEntries();
+ Double_t mean=0, rms=0;
+ if (entries>kMinEntries){
+ mean = hisDelta->GetMean();
+ rms = hisDelta->GetRMS();
+ }
+ Double_t sector = 9.*x2/TMath::Pi();
+ if (sector<0) sector+=18;
+ Double_t dsec = sector-Int_t(sector)-0.5;
+ Double_t snp=0; // dummy snp - equal 0
+ (*pcstream)<<hname<<
+ "run="<<run<<
+ "bz="<<bz<< // magnetic field
+ "theta="<<x1<< // theta
+ "phi="<<x2<< // phi (alpha)
+ "z="<<x3<< // z at "vertex"
+ "snp="<<snp<< // dummy snp
+ "entries="<<entries<< // entries in bin
+ "mean="<<mean<< // mean
+ "rms="<<rms<<
+ "refX="<<refX<< // track matching refernce plane
+ "type="<<type<< // parameter type
+ "sector="<<sector<< // sector
+ "dsec="<<dsec<< // dummy delta sector
+ "\n";
+ delete hisDelta;
+ printf("%f\t%f\t%f\t%f\t%f\n",x1,x3,x2, entries,mean);
+ }
+ delete his3;
+ }
+ delete his1;
+ }
+ delete his0;
+}
+
+
+
+void AliTPCCorrection::MakeDistortionMapSector(THnSparse * hisInput, TTreeSRedirector * const pcstream, const char* hname, Int_t run, Int_t type){
+ //
+ // make a distortion map out of the residual histogram
+ // Results are written to the debug streamer - pcstream
+ // Parameters:
+ // his0 - input (4D) residual histogram
+ // pcstream - file to write the tree
+ // run - run number
+ // type - 0- y 1-z,2 -snp, 3-theta
+ // marian.ivanov@cern.ch
+
+ //Collection name='TObjArray', class='TObjArray', size=16
+ //0 OBJ: TAxis delta delta
+ //1 OBJ: TAxis phi phi
+ //2 OBJ: TAxis localX localX
+ //3 OBJ: TAxis kY kY
+ //4 OBJ: TAxis kZ kZ
+ //5 OBJ: TAxis is1 is1
+ //6 OBJ: TAxis is0 is0
+ //7. OBJ: TAxis z z
+ //8. OBJ: TAxis IsPrimary IsPrimary
+
+ const Int_t kMinEntries=10;
+ THnSparse * hisSector0=0;
+ TH1 * htemp=0; // histogram to calculate mean value of parameter
+ Double_t bz=AliTrackerBase::GetBz();
+
+ //
+ // Loop over pair of sector:
+ // isPrim - 8 ==> 8
+ // isec0 - 6 ==> 7
+ // isec1 - 5 ==> 6
+ // refX - 2 ==> 5
+ //
+ // phi - 1 ==> 4
+ // z - 7 ==> 3
+ // snp - 3 ==> 2
+ // theta- 4 ==> 1
+ // 0 ==> 0;
+ for (Int_t isec0=0; isec0<72; isec0++){
+ Int_t index0[9]={0, 4, 3, 7, 1, 2, 5, 6,8}; //regroup indeces
+ //
+ //hisInput->GetAxis(8)->SetRangeUser(-0.1,0.4); // select secondaries only ? - get out later ?
+ hisInput->GetAxis(6)->SetRangeUser(isec0-0.1,isec0+0.1);
+ hisSector0=hisInput->Projection(7,index0);
+ //
+ //
+ for (Int_t isec1=isec0+1; isec1<72; isec1++){
+ //if (isec1!=isec0+36) continue;
+ if ( TMath::Abs((isec0%18)-(isec1%18))>1.5 && TMath::Abs((isec0%18)-(isec1%18))<16.5) continue;
+ printf("Sectors %d\t%d\n",isec1,isec0);
+ hisSector0->GetAxis(6)->SetRangeUser(isec1-0.1,isec1+0.1);
+ TH1 * hisX=hisSector0->Projection(5);
+ Double_t refX= hisX->GetMean();
+ delete hisX;
+ TH1 *hisDelta=hisSector0->Projection(0);
+ Double_t dmean = hisDelta->GetMean();
+ Double_t drms = hisDelta->GetRMS();
+ hisSector0->GetAxis(0)->SetRangeUser(dmean-5.*drms, dmean+5.*drms);
+ delete hisDelta;
+ //
+ // 1. make default selections
+ //
+ Int_t idim0[5]={0 , 1, 2, 3, 4}; // {delta, theta, snp, z, phi }
+ THnSparse *hisSector1= hisSector0->Projection(5,idim0);
+ //
+ // 2. Get mean in diferent bins
+ //
+ Int_t idim[5]={0, 1, 2, 3, 4}; // {delta, theta-1,snp-2 ,z-3, phi-4}
+ //
+ // Int_t nbinsPhi=hisSector1->GetAxis(4)->GetNbins();
+ Int_t firstPhi=hisSector1->GetAxis(4)->GetFirst();
+ Int_t lastPhi =hisSector1->GetAxis(4)->GetLast();
+ //
+ for (Int_t ibinPhi=firstPhi; ibinPhi<=lastPhi; ibinPhi+=1){ //axis 4 - phi
+ //
+ // Phi loop
+ //
+ Double_t xPhi= hisSector1->GetAxis(4)->GetBinCenter(ibinPhi);
+ Double_t psec = (9*xPhi/TMath::Pi());
+ if (psec<0) psec+=18;
+ Bool_t isOK0=kFALSE;
+ Bool_t isOK1=kFALSE;
+ if (TMath::Abs(psec-isec0%18-0.5)<1. || TMath::Abs(psec-isec0%18-17.5)<1.) isOK0=kTRUE;
+ if (TMath::Abs(psec-isec1%18-0.5)<1. || TMath::Abs(psec-isec1%18-17.5)<1.) isOK1=kTRUE;
+ if (!isOK0) continue;
+ if (!isOK1) continue;
+ //
+ hisSector1->GetAxis(4)->SetRange(TMath::Max(ibinPhi-2,firstPhi),TMath::Min(ibinPhi+2,lastPhi));
+ if (isec1!=isec0+36) {
+ hisSector1->GetAxis(4)->SetRange(TMath::Max(ibinPhi-3,firstPhi),TMath::Min(ibinPhi+3,lastPhi));
+ }
+ //
+ htemp = hisSector1->Projection(4);
+ xPhi=htemp->GetMean();
+ delete htemp;
+ THnSparse * hisPhi = hisSector1->Projection(4,idim);
+ //Int_t nbinsZ = hisPhi->GetAxis(3)->GetNbins();
+ Int_t firstZ = hisPhi->GetAxis(3)->GetFirst();
+ Int_t lastZ = hisPhi->GetAxis(3)->GetLast();
+ //
+ for (Int_t ibinZ=firstZ; ibinZ<=lastZ; ibinZ+=1){ // axis 3 - z
+ //
+ // Z loop
+ //
+ hisPhi->GetAxis(3)->SetRange(TMath::Max(ibinZ,firstZ),TMath::Min(ibinZ,lastZ));
+ if (isec1!=isec0+36) {
+ hisPhi->GetAxis(3)->SetRange(TMath::Max(ibinZ-1,firstZ),TMath::Min(ibinZ-1,lastZ));
+ }
+ htemp = hisPhi->Projection(3);
+ Double_t xZ= htemp->GetMean();
+ delete htemp;
+ THnSparse * hisZ= hisPhi->Projection(3,idim);
+ //projected histogram according selection 3 -z
+ //
+ //
+ //Int_t nbinsSnp = hisZ->GetAxis(2)->GetNbins();
+ Int_t firstSnp = hisZ->GetAxis(2)->GetFirst();
+ Int_t lastSnp = hisZ->GetAxis(2)->GetLast();
+ for (Int_t ibinSnp=firstSnp; ibinSnp<=lastSnp; ibinSnp+=2){ // axis 2 - snp
+ //
+ // Snp loop
+ //
+ hisZ->GetAxis(2)->SetRange(TMath::Max(ibinSnp-1,firstSnp),TMath::Min(ibinSnp+1,lastSnp));
+ if (isec1!=isec0+36) {
+ hisZ->GetAxis(2)->SetRange(TMath::Max(ibinSnp-2,firstSnp),TMath::Min(ibinSnp+2,lastSnp));
+ }
+ htemp = hisZ->Projection(2);
+ Double_t xSnp= htemp->GetMean();
+ delete htemp;
+ THnSparse * hisSnp= hisZ->Projection(2,idim);
+ //projected histogram according selection 2 - snp
+
+ //Int_t nbinsTheta = hisSnp->GetAxis(1)->GetNbins();
+ Int_t firstTheta = hisSnp->GetAxis(1)->GetFirst();
+ Int_t lastTheta = hisSnp->GetAxis(1)->GetLast();
+ //
+ for (Int_t ibinTheta=firstTheta; ibinTheta<=lastTheta; ibinTheta+=2){ // axis1 theta
+
+
+ hisSnp->GetAxis(1)->SetRange(TMath::Max(ibinTheta-2,firstTheta),TMath::Min(ibinTheta+2,lastTheta));
+ if (isec1!=isec0+36) {
+ hisSnp->GetAxis(1)->SetRange(TMath::Max(ibinTheta-3,firstTheta),TMath::Min(ibinTheta+3,lastTheta));
+ }
+ htemp = hisSnp->Projection(1);
+ Double_t xTheta=htemp->GetMean();
+ delete htemp;
+ hisDelta = hisSnp->Projection(0);
+ //
+ Double_t entries = hisDelta->GetEntries();
+ Double_t mean=0, rms=0;
+ if (entries>kMinEntries){
+ mean = hisDelta->GetMean();
+ rms = hisDelta->GetRMS();
+ }
+ Double_t sector = 9.*xPhi/TMath::Pi();
+ if (sector<0) sector+=18;
+ Double_t dsec = sector-Int_t(sector)-0.5;
+ Int_t dtype=1; // TPC alignment type
+ (*pcstream)<<hname<<
+ "run="<<run<<
+ "bz="<<bz<< // magnetic field
+ "ptype="<<type<< // parameter type
+ "dtype="<<dtype<< // parameter type
+ "isec0="<<isec0<< // sector 0
+ "isec1="<<isec1<< // sector 1
+ "sector="<<sector<< // sector as float
+ "dsec="<<dsec<< // delta sector
+ //
+ "theta="<<xTheta<< // theta
+ "phi="<<xPhi<< // phi (alpha)
+ "z="<<xZ<< // z
+ "snp="<<xSnp<< // snp
+ //
+ "entries="<<entries<< // entries in bin
+ "mean="<<mean<< // mean
+ "rms="<<rms<< // rms
+ "refX="<<refX<< // track matching reference plane
+ "\n";
+ delete hisDelta;
+ printf("%d\t%d\t%f\t%f\t%f\t%f\t%f\t%f\n",isec0, isec1, xPhi,xZ,xSnp, xTheta, entries,mean);
+ //
+ }//ibinTheta
+ delete hisSnp;
+ } //ibinSnp
+ delete hisZ;
+ }//ibinZ
+ delete hisPhi;
+ }//ibinPhi
+ delete hisSector1;
+ }//isec1
+ delete hisSector0;
+ }//isec0
+}
+
+
+
+
+
+
+
+void AliTPCCorrection::StoreInOCDB(Int_t startRun, Int_t endRun, const char *comment){
+ //
+ // Store object in the OCDB
+ // By default the object is stored in the current directory
+ // default comment consit of user name and the date
+ //
+ TString ocdbStorage="";
+ ocdbStorage+="local://"+gSystem->GetFromPipe("pwd")+"/OCDB";
+ AliCDBMetaData *metaData= new AliCDBMetaData();
+ metaData->SetObjectClassName("AliTPCCorrection");
+ metaData->SetResponsible("Marian Ivanov");
+ metaData->SetBeamPeriod(1);
+ metaData->SetAliRootVersion("05-25-01"); //root version
+ TString userName=gSystem->GetFromPipe("echo $USER");
+ TString date=gSystem->GetFromPipe("date");
+
+ if (!comment) metaData->SetComment(Form("Space point distortion calibration\n User: %s\n Data%s",userName.Data(),date.Data()));
+ if (comment) metaData->SetComment(comment);
+ AliCDBId* id1=NULL;
+ id1=new AliCDBId("TPC/Calib/Correction", startRun, endRun);
+ AliCDBStorage* gStorage = AliCDBManager::Instance()->GetStorage(ocdbStorage);
+ gStorage->Put(this, (*id1), metaData);
+}
+
+
+void AliTPCCorrection::FastSimDistortedVertex(Double_t orgVertex[3], Int_t nTracks, AliESDVertex &aV, AliESDVertex &avOrg, AliESDVertex &cV, AliESDVertex &cvOrg, TTreeSRedirector * const pcstream, Double_t etaCuts){
+ //
+ // Fast method to simulate the influence of the given distortion on the vertex reconstruction
+ //
+
+ AliMagF* magF= (AliMagF*)TGeoGlobalMagField::Instance()->GetField();
+ if (!magF) AliError("Magneticd field - not initialized");
+ Double_t bz = magF->SolenoidField(); //field in kGauss
+ printf("bz: %f\n",bz);
+ AliVertexerTracks *vertexer = new AliVertexerTracks(bz); // bz in kGauss
+
+ TObjArray aTrk; // Original Track array of Aside
+ TObjArray daTrk; // Distorted Track array of A side
+ UShort_t *aId = new UShort_t[nTracks]; // A side Track ID
+ TObjArray cTrk;
+ TObjArray dcTrk;
+ UShort_t *cId = new UShort_t [nTracks];
+ Int_t id=0;
+ Double_t mass = TDatabasePDG::Instance()->GetParticle("pi+")->Mass();
+ TF1 fpt("fpt",Form("x*(1+(sqrt(x*x+%f^2)-%f)/([0]*[1]))^(-[0])",mass,mass),0.4,10);
+ fpt.SetParameters(7.24,0.120);
+ fpt.SetNpx(10000);
+ for(Int_t nt=0; nt<nTracks; nt++){
+ Double_t phi = gRandom->Uniform(0.0, 2*TMath::Pi());
+ Double_t eta = gRandom->Uniform(-etaCuts, etaCuts);
+ Double_t pt = fpt.GetRandom(); // momentum for f1
+ // printf("phi %lf eta %lf pt %lf\n",phi,eta,pt);
+ Short_t sign=1;
+ if(gRandom->Rndm() < 0.5){
+ sign =1;
+ }else{
+ sign=-1;
+ }
+
+ Double_t theta = 2*TMath::ATan(TMath::Exp(-eta))-TMath::Pi()/2.;
+ Double_t pxyz[3];
+ pxyz[0]=pt*TMath::Cos(phi);
+ pxyz[1]=pt*TMath::Sin(phi);
+ pxyz[2]=pt*TMath::Tan(theta);
+ Double_t cv[21]={0};
+ AliExternalTrackParam *t= new AliExternalTrackParam(orgVertex, pxyz, cv, sign);
+
+ Double_t refX=1.;
+ Int_t dir=-1;
+ AliExternalTrackParam *td = FitDistortedTrack(*t, refX, dir, NULL);
+ if (!td) continue;
+ if (pcstream) (*pcstream)<<"track"<<
+ "eta="<<eta<<
+ "theta="<<theta<<
+ "tOrig.="<<t<<
+ "td.="<<td<<
+ "\n";
+ if(( eta>0.07 )&&( eta<etaCuts )) { // - log(tan(0.5*theta)), theta = 0.5*pi - ATan(5.0/80.0)
+ if (td){
+ daTrk.AddLast(td);
+ aTrk.AddLast(t);
+ Int_t nn=aTrk.GetEntriesFast();
+ aId[nn]=id;
+ }
+ }else if(( eta<-0.07 )&&( eta>-etaCuts )){
+ if (td){
+ dcTrk.AddLast(td);
+ cTrk.AddLast(t);
+ Int_t nn=cTrk.GetEntriesFast();
+ cId[nn]=id;
+ }
+ }
+ id++;
+ }// end of track loop
+
+ vertexer->SetTPCMode();
+ vertexer->SetConstraintOff();
+
+ aV = *((AliESDVertex*)vertexer->FindPrimaryVertex(&daTrk,aId));
+ avOrg = *((AliESDVertex*)vertexer->FindPrimaryVertex(&aTrk,aId));
+ cV = *((AliESDVertex*)vertexer->FindPrimaryVertex(&dcTrk,cId));
+ cvOrg = *((AliESDVertex*)vertexer->FindPrimaryVertex(&cTrk,cId));
+ if (pcstream) (*pcstream)<<"vertex"<<
+ "x="<<orgVertex[0]<<
+ "y="<<orgVertex[1]<<
+ "z="<<orgVertex[2]<<
+ "av.="<<&aV<< // distorted vertex A side
+ "cv.="<<&cV<< // distroted vertex C side
+ "avO.="<<&avOrg<< // original vertex A side
+ "cvO.="<<&cvOrg<<
+ "\n";
+ delete []aId;
+ delete []cId;
+}
+
+void AliTPCCorrection::AddVisualCorrection(AliTPCCorrection* corr, Int_t position){
+ //
+ // make correction available for visualization using
+ // TFormula, TFX and TTree::Draw
+ // important in order to check corrections and also compute dervied variables
+ // e.g correction partial derivatives
+ //
+ // NOTE - class is not owner of correction
+ //
+ if (!fgVisualCorrection) fgVisualCorrection=new TObjArray(10000);
+ if (position>=fgVisualCorrection->GetEntriesFast())
+ fgVisualCorrection->Expand((position+10)*2);
+ fgVisualCorrection->AddAt(corr, position);
+}
+
+
+
+Double_t AliTPCCorrection::GetCorrSector(Double_t sector, Double_t r, Double_t kZ, Int_t axisType, Int_t corrType){
+ //
+ // calculate the correction at given position - check the geffCorr
+ //
+ // corrType return values
+ // 0 - delta R
+ // 1 - delta RPhi
+ // 2 - delta Z
+ // 3 - delta RPHI
+ //
+ if (!fgVisualCorrection) return 0;
+ AliTPCCorrection *corr = (AliTPCCorrection*)fgVisualCorrection->At(corrType);
+ if (!corr) return 0;
+
+ Double_t phi=sector*TMath::Pi()/9.;
+ Double_t gx = r*TMath::Cos(phi);
+ Double_t gy = r*TMath::Sin(phi);
+ Double_t gz = r*kZ;
+ Int_t nsector=(gz>0) ? 0:18;
+ //
+ //
+ //
+ Float_t distPoint[3]={gx,gy,gz};
+ corr->DistortPoint(distPoint, nsector);
+ Double_t r0=TMath::Sqrt(gx*gx+gy*gy);
+ Double_t r1=TMath::Sqrt(distPoint[0]*distPoint[0]+distPoint[1]*distPoint[1]);
+ Double_t phi0=TMath::ATan2(gy,gx);
+ Double_t phi1=TMath::ATan2(distPoint[1],distPoint[0]);
+ if (axisType==0) return r1-r0;
+ if (axisType==1) return (phi1-phi0)*r0;
+ if (axisType==2) return distPoint[2]-gz;
+ if (axisType==3) return (TMath::Cos(phi)*(distPoint[0]-gx)+ TMath::Cos(phi)*(distPoint[1]-gy));
+ return phi1-phi0;
+}
+
+Double_t AliTPCCorrection::GetCorrXYZ(Double_t gx, Double_t gy, Double_t gz, Int_t axisType, Int_t corrType){
+ //
+ // return correction at given x,y,z
+ //
+ if (!fgVisualCorrection) return 0;
+ AliTPCCorrection *corr = (AliTPCCorrection*)fgVisualCorrection->At(corrType);
+ if (!corr) return 0;
+ Double_t phi0= TMath::ATan2(gy,gx);
+ Int_t nsector=(gz>0) ? 0:18;
+ Float_t distPoint[3]={gx,gy,gz};
+ corr->DistortPoint(distPoint, nsector);
+ Double_t r0=TMath::Sqrt(gx*gx+gy*gy);
+ Double_t r1=TMath::Sqrt(distPoint[0]*distPoint[0]+distPoint[1]*distPoint[1]);
+ Double_t phi1=TMath::ATan2(distPoint[1],distPoint[0]);
+ if (axisType==0) return r1-r0;
+ if (axisType==1) return (phi1-phi0)*r0;
+ if (axisType==2) return distPoint[2]-gz;
+ return phi1-phi0;
+}
+
+
+
+
+
+void AliTPCCorrection::MakeLaserDistortionTree(TTree* tree, TObjArray */*corrArray*/, Int_t /*itype*/){
+ //
+ // Make a laser fit tree for global minimization
+ //
+ AliTPCcalibDB* calib=AliTPCcalibDB::Instance();
+ AliTPCCorrection * correction = calib->GetTPCComposedCorrection();
+ if (!correction) correction = calib->GetTPCComposedCorrection(AliTrackerBase::GetBz());
+ correction->AddVisualCorrection(correction,0); //register correction
+
+ // AliTPCTransform *transform = AliTPCcalibDB::Instance()->GetTransform() ;
+ //AliTPCParam *param = AliTPCcalibDB::Instance()->GetParameters();
+ //
+ const Double_t cutErrY=0.05;
+ const Double_t kSigmaCut=4;
+ // const Double_t cutErrZ=0.03;
+ const Double_t kEpsilon=0.00000001;
+ // const Double_t kMaxDist=1.; // max distance - space correction
+ TVectorD *vecdY=0;
+ TVectorD *vecdZ=0;
+ TVectorD *veceY=0;
+ TVectorD *veceZ=0;
+ AliTPCLaserTrack *ltr=0;
+ AliTPCLaserTrack::LoadTracks();
+ tree->SetBranchAddress("dY.",&vecdY);
+ tree->SetBranchAddress("dZ.",&vecdZ);
+ tree->SetBranchAddress("eY.",&veceY);
+ tree->SetBranchAddress("eZ.",&veceZ);
+ tree->SetBranchAddress("LTr.",<r);
+ Int_t entries= tree->GetEntries();
+ TTreeSRedirector *pcstream= new TTreeSRedirector("distortionLaser_0.root");
+ Double_t bz=AliTrackerBase::GetBz();
+ //
+ // Double_t globalXYZ[3];
+ //Double_t globalXYZCorr[3];
+ for (Int_t ientry=0; ientry<entries; ientry++){
+ tree->GetEntry(ientry);
+ if (!ltr->GetVecGX()){
+ ltr->UpdatePoints();
+ }
+ //
+ TVectorD fit10(5);
+ TVectorD fit5(5);
+ printf("Entry\t%d\n",ientry);
+ for (Int_t irow0=0; irow0<158; irow0+=1){
+ //
+ TLinearFitter fitter10(4,"hyp3");
+ TLinearFitter fitter5(2,"hyp1");
+ Int_t sector= (Int_t)(*ltr->GetVecSec())[irow0];
+ if (sector<0) continue;
+ //if (TMath::Abs(vecdY->GetMatrixArray()[irow0])<kEpsilon) continue;
+
+ Double_t refX= (*ltr->GetVecLX())[irow0];
+ Int_t firstRow1 = TMath::Max(irow0-10,0);
+ Int_t lastRow1 = TMath::Min(irow0+10,158);
+ Double_t padWidth=(irow0<64)?0.4:0.6;
+ // make long range fit
+ for (Int_t irow1=firstRow1; irow1<=lastRow1; irow1++){
+ if (TMath::Abs((*ltr->GetVecSec())[irow1]-sector)>kEpsilon) continue;
+ if (veceY->GetMatrixArray()[irow1]>cutErrY) continue;
+ if (TMath::Abs(vecdY->GetMatrixArray()[irow1])<kEpsilon) continue;
+ Double_t idealX= (*ltr->GetVecLX())[irow1];
+ Double_t idealY= (*ltr->GetVecLY())[irow1];
+ // Double_t idealZ= (*ltr->GetVecLZ())[irow1];
+ Double_t gx= (*ltr->GetVecGX())[irow1];
+ Double_t gy= (*ltr->GetVecGY())[irow1];
+ Double_t gz= (*ltr->GetVecGZ())[irow1];
+ Double_t measY=(*vecdY)[irow1]+idealY;
+ Double_t deltaR = GetCorrXYZ(gx, gy, gz, 0,0);
+ // deltaR = R distorted -R ideal
+ Double_t xxx[4]={idealX+deltaR-refX,TMath::Cos(idealY/padWidth), TMath::Sin(idealY/padWidth)};
+ fitter10.AddPoint(xxx,measY,1);
+ }
+ Bool_t isOK=kTRUE;
+ Double_t rms10=0;//TMath::Sqrt(fitter10.GetChisquare()/(fitter10.GetNpoints()-4));
+ Double_t mean10 =0;// fitter10.GetParameter(0);
+ Double_t slope10 =0;// fitter10.GetParameter(0);
+ Double_t cosPart10 = 0;// fitter10.GetParameter(2);
+ Double_t sinPart10 =0;// fitter10.GetParameter(3);
+
+ if (fitter10.GetNpoints()>10){
+ fitter10.Eval();
+ rms10=TMath::Sqrt(fitter10.GetChisquare()/(fitter10.GetNpoints()-4));
+ mean10 = fitter10.GetParameter(0);
+ slope10 = fitter10.GetParameter(1);
+ cosPart10 = fitter10.GetParameter(2);
+ sinPart10 = fitter10.GetParameter(3);
+ //
+ // make short range fit
+ //
+ for (Int_t irow1=firstRow1+5; irow1<=lastRow1-5; irow1++){
+ if (TMath::Abs((*ltr->GetVecSec())[irow1]-sector)>kEpsilon) continue;
+ if (veceY->GetMatrixArray()[irow1]>cutErrY) continue;
+ if (TMath::Abs(vecdY->GetMatrixArray()[irow1])<kEpsilon) continue;
+ Double_t idealX= (*ltr->GetVecLX())[irow1];
+ Double_t idealY= (*ltr->GetVecLY())[irow1];
+ // Double_t idealZ= (*ltr->GetVecLZ())[irow1];
+ Double_t gx= (*ltr->GetVecGX())[irow1];
+ Double_t gy= (*ltr->GetVecGY())[irow1];
+ Double_t gz= (*ltr->GetVecGZ())[irow1];
+ Double_t measY=(*vecdY)[irow1]+idealY;
+ Double_t deltaR = GetCorrXYZ(gx, gy, gz, 0,0);
+ // deltaR = R distorted -R ideal
+ Double_t expY= mean10+slope10*(idealX+deltaR-refX);
+ if (TMath::Abs(measY-expY)>kSigmaCut*rms10) continue;
+ //
+ Double_t corr=cosPart10*TMath::Cos(idealY/padWidth)+sinPart10*TMath::Sin(idealY/padWidth);
+ Double_t xxx[4]={idealX+deltaR-refX,TMath::Cos(idealY/padWidth), TMath::Sin(idealY/padWidth)};
+ fitter5.AddPoint(xxx,measY-corr,1);
+ }
+ }else{
+ isOK=kFALSE;
+ }
+ if (fitter5.GetNpoints()<8) isOK=kFALSE;
+
+ Double_t rms5=0;//TMath::Sqrt(fitter5.GetChisquare()/(fitter5.GetNpoints()-4));
+ Double_t offset5 =0;// fitter5.GetParameter(0);
+ Double_t slope5 =0;// fitter5.GetParameter(0);
+ if (isOK){
+ fitter5.Eval();
+ rms5=TMath::Sqrt(fitter5.GetChisquare()/(fitter5.GetNpoints()-4));
+ offset5 = fitter5.GetParameter(0);
+ slope5 = fitter5.GetParameter(0);
+ }
+ //
+ Double_t dtype=5;
+ Double_t ptype=0;
+ Double_t phi =(*ltr->GetVecPhi())[irow0];
+ Double_t theta =ltr->GetTgl();
+ Double_t mean=(vecdY)->GetMatrixArray()[irow0];
+ Double_t gx=0,gy=0,gz=0;
+ Double_t snp = (*ltr->GetVecP2())[irow0];
+ Int_t bundle= ltr->GetBundle();
+ Int_t id= ltr->GetId();
+ // Double_t rms = err->GetMatrixArray()[irow];
+ //
+ gx = (*ltr->GetVecGX())[irow0];
+ gy = (*ltr->GetVecGY())[irow0];
+ gz = (*ltr->GetVecGZ())[irow0];
+ Double_t dRrec = GetCorrXYZ(gx, gy, gz, 0,0);
+ fitter10.GetParameters(fit10);
+ fitter5.GetParameters(fit5);
+ Double_t idealY= (*ltr->GetVecLY())[irow0];
+ Double_t measY=(*vecdY)[irow0]+idealY;
+ Double_t corr=cosPart10*TMath::Cos(idealY/padWidth)+sinPart10*TMath::Sin(idealY/padWidth);
+ if (TMath::Max(rms5,rms10)>0.06) isOK=kFALSE;
+ //
+ (*pcstream)<<"fitFull"<< // dumpe also intermediate results
+ "bz="<<bz<< // magnetic filed used
+ "dtype="<<dtype<< // detector match type
+ "ptype="<<ptype<< // parameter type
+ "theta="<<theta<< // theta
+ "phi="<<phi<< // phi
+ "snp="<<snp<< // snp
+ "sector="<<sector<<
+ "bundle="<<bundle<<
+// // "dsec="<<dsec<<
+ "refX="<<refX<< // reference radius
+ "gx="<<gx<< // global position
+ "gy="<<gy<< // global position
+ "gz="<<gz<< // global position
+ "dRrec="<<dRrec<< // delta Radius in reconstruction
+ "id="<<id<< //bundle
+ "rms10="<<rms10<<
+ "rms5="<<rms5<<
+ "fit10.="<<&fit10<<
+ "fit5.="<<&fit5<<
+ "measY="<<measY<<
+ "mean="<<mean<<
+ "idealY="<<idealY<<
+ "corr="<<corr<<
+ "isOK="<<isOK<<
+ "\n";
+ }
+ }
+ delete pcstream;
+}