// //
///////////////////////////////////////////////////////////////////////////////
+
#include <TMath.h>
#include "TClass.h"
#include "AliTRDarrayADC.h"
#include "AliTRDrawStreamBase.h"
#include "AliTRDrawOldStream.h"
-#include "AliTRDRawStreamV2.h"
#include "AliTRDcalibDB.h"
#include "AliTRDSignalIndex.h"
#include "AliTRDfeeParam.h"
}
//_____________________________________________________________________________
-Int_t AliTRDrawData::AddStackIndexWords(UInt_t *buf, Int_t nStack, Int_t nMax){
+Int_t AliTRDrawData::AddStackIndexWords(UInt_t *buf, Int_t /*nStack*/, Int_t nMax){
//
// This function add stack index words and stack header when there is data for the stack
//
}
//_____________________________________________________________________________
-Int_t AliTRDrawData::ProduceHcData(AliTRDarrayADC *digits, Int_t side, Int_t det, UInt_t *buf, Int_t maxSize, Bool_t newEvent = kFALSE, Bool_t newSM = kFALSE){
+Int_t AliTRDrawData::ProduceHcData(AliTRDarrayADC *digits, Int_t side, Int_t det, UInt_t *buf, Int_t maxSize, Bool_t /*newEvent = kFALSE*/, Bool_t /*newSM = kFALSE*/){
//
// This function can be used for both ZS and NZS data
//
Int_t nw = 0; // Number of written words
Int_t of = 0; // Number of overflowed words
+ Int_t *tempnw = 0x0; // Number of written words for temp. buffer
+ Int_t *tempof = 0x0; // Number of overflowed words for temp. buffer
Int_t layer = fGeo->GetLayer( det ); // Layer
Int_t stack = fGeo->GetStack( det ); // Stack
Int_t sect = fGeo->GetSector( det ); // Sector (=iDDL)
- Int_t nRow = fGeo->GetRowMax( layer, stack, sect );
- Int_t nCol = fGeo->GetColMax( layer );
- const Int_t kNTBin = AliTRDcalibDB::Instance()->GetNumberOfTimeBins();
- Int_t kCtype = 0; // Chamber type (0:C0, 1:C1)
+ const Int_t kCtype = fGeo->GetStack(det) == 2 ? 0 : 1; // Chamber type (0:C0, 1:C1)
- Bool_t tracklet_on = fFee->GetTracklet(); // **new**
-
- // Check the nCol and nRow.
- if ((nCol == 144) && (nRow == 16 || nRow == 12)) {
- kCtype = (nRow-12) / 4;
- } else {
- AliError(Form("This type of chamber is not supported (nRow=%d, nCol=%d).",nRow,nCol));
- return 0;
- }
+ Bool_t tracklet_on = fFee->GetTracklet(); // tracklet simulation active?
AliDebug(1,Form("Producing raw data for sect=%d layer=%d stack=%d side=%d",sect,layer,stack,side));
+
+ AliTRDmcmSim* mcm = new AliTRDmcmSim();
- AliTRDmcmSim** mcm = new AliTRDmcmSim*[(kCtype + 3)*(fGeo->MCMmax())];
+ UInt_t *tempBuffer = buf; // tempBuffer used to write ADC data
+ // different in case of tracklet writing
+
+ if (tracklet_on) {
+ tempBuffer = new UInt_t[maxSize];
+ tempnw = new Int_t(0);
+ tempof = new Int_t(0);
+ }
+ else {
+ tempnw = &nw;
+ tempof = &of;
+ }
- //if (newEvent) ProduceSMIndexData(buf, nw); // SM index words , Stack index words
+ WriteIntermediateWordsV2(tempBuffer,*tempnw,*tempof,maxSize,det,side); //??? no tracklet or NZS
- if (!tracklet_on) WriteIntermediateWordsV2(buf,nw,of,maxSize,det,side); // no tracklet or NZS
-
-
// scanning direction such, that tracklet-words are sorted in ascending z and then in ascending y order
// ROB numbering on chamber and MCM numbering on ROB increase with decreasing z and increasing y
- //for (Int_t iRobRow = (kCtype + 3)-1; iRobRow >= 0; iRobRow-- ) {
for (Int_t iRobRow = 0; iRobRow <= (kCtype + 3)-1; iRobRow++ ) { // ROB number should be increasing
- Int_t iRob = iRobRow * 2 + side;
- // MCM on one ROB
- for (Int_t iMcmRB = 0; iMcmRB < fGeo->MCMmax(); iMcmRB++ ) {
- Int_t iMcm = 16 - 4*(iMcmRB/4 + 1) + (iMcmRB%4);
- Int_t entry = iRobRow*(fGeo->MCMmax()) + iMcm;
-
- mcm[entry] = new AliTRDmcmSim();
- mcm[entry]->Init( det, iRob, iMcm , newEvent);
- //mcm[entry]->Init( det, iRob, iMcm);
- if (newEvent == kTRUE) newEvent = kFALSE; // only one mcm is concerned with new event
- Int_t padrow = mcm[entry]->GetRow();
-
- // Copy ADC data to MCM simulator
- for (Int_t iAdc = 0; iAdc < 21; iAdc++ ) {
- Int_t padcol = mcm[entry]->GetCol( iAdc );
- if ((padcol >= 0) && (padcol < nCol)) {
- for (Int_t iT = 0; iT < kNTBin; iT++) {
- mcm[entry]->SetData( iAdc, iT, digits->GetData( padrow, padcol, iT) );
- }
- }
- else { // this means it is out of chamber, and masked ADC
- mcm[entry]->SetDataPedestal( iAdc );
- }
- }
+ Int_t iRob = iRobRow * 2 + side;
+ // MCM on one ROB
+ for (Int_t iMcmRB = 0; iMcmRB < fGeo->MCMmax(); iMcmRB++ ) {
+ Int_t iMcm = 16 - 4*(iMcmRB/4 + 1) + (iMcmRB%4);
+
+ mcm->Init(det, iRob, iMcm);
+ mcm->SetData(digits); // no filtering done here (already done in digitizer)
+ if (tracklet_on) {
+ mcm->Tracklet();
+ Int_t tempNw = mcm->ProduceTrackletStream(&buf[nw], maxSize - nw);
+ if( tempNw < 0 ) {
+ of += tempNw;
+ nw += maxSize - nw;
+ AliError(Form("Buffer overflow detected. Please increase the buffer size and recompile."));
+ } else {
+ nw += tempNw;
+ }
+ }
+ mcm->ZSMapping(); // Calculate zero suppression mapping
+ // at the moment it has to be rerun here
+ // Write MCM data to temp. buffer
+ Int_t tempNw = mcm->ProduceRawStream( &tempBuffer[*tempnw], maxSize - *tempnw, fEventCounter );
+ if ( tempNw < 0 ) {
+ *tempof += tempNw;
+ *tempnw += maxSize - nw;
+ AliError(Form("Buffer overflow detected. Please increase the buffer size and recompile."));
+ } else {
+ *tempnw += tempNw;
+ }
+ }
+ }
- // Simulate process in MCM
- mcm[entry]->Filter(); // Apply filter
- mcm[entry]->ZSMapping(); // Calculate zero suppression mapping
-//jkl mcm[entry]->CopyArrays();
-//jkl mcm[entry]->GeneratefZSM1Dim();
-//jkl mcm[entry]->RestoreZeros();
-
- if (tracklet_on) {
- mcm[entry]->Tracklet();
- Int_t tempNw = mcm[entry]->ProduceTrackletStream( &buf[nw], maxSize - nw );
- //Int_t tempNw = 0;
- if( tempNw < 0 ) {
- of += tempNw;
- nw += maxSize - nw;
- AliError(Form("Buffer overflow detected. Please increase the buffer size and recompile."));
- } else {
- nw += tempNw;
- }
- } else { // no tracklets: write raw-data already in this loop
- // Write MCM data to buffer
- Int_t tempNw = mcm[entry]->ProduceRawStream( &buf[nw], maxSize - nw, fEventCounter );
- if( tempNw < 0 ) {
- of += tempNw;
- nw += maxSize - nw;
- AliError(Form("Buffer overflow detected. Please increase the buffer size and recompile."));
- } else {
- nw += tempNw;
- }
-
- delete mcm[entry];
- }
+ delete mcm;
- //mcm->DumpData( "trdmcmdata.txt", "RFZS" ); // debugging purpose
- }
- }
- // if tracklets are switched on, raw-data can be written only after all tracklets
+ // in case of tracklet writing copy temp data to final buffer
if (tracklet_on) {
- WriteIntermediateWordsV2(buf,nw,of,maxSize,det,side);
-
- // Scan for ROB and MCM
- for (Int_t iRobRow = (kCtype + 3)-1; iRobRow >= 0; iRobRow-- ) {
- //Int_t iRob = iRobRow * 2 + side;
- // MCM on one ROB
- for (Int_t iMcmRB = 0; iMcmRB < fGeo->MCMmax(); iMcmRB++ ) {
- Int_t iMcm = 16 - 4*(iMcmRB/4 + 1) + (iMcmRB%4);
-
- Int_t entry = iRobRow*(fGeo->MCMmax()) + iMcm;
-
- // Write MCM data to buffer
- Int_t tempNw = mcm[entry]->ProduceRawStream( &buf[nw], maxSize - nw, fEventCounter );
- if( tempNw < 0 ) {
- of += tempNw;
- nw += maxSize - nw;
- AliError(Form("Buffer overflow detected. Please increase the buffer size and recompile."));
- } else {
- nw += tempNw;
- }
-
- delete mcm[entry];
-
- }
- }
+ if (nw + *tempnw < maxSize) {
+ memcpy(&buf[nw], tempBuffer, *tempnw * sizeof(UInt_t));
+ nw += *tempnw;
+ }
+ else {
+ AliError("Buffer overflow detected");
+ }
}
- delete [] mcm;
-
// Write end of raw data marker
if (nw+3 < maxSize) {
- buf[nw++] = kEndofrawdatamarker;
- buf[nw++] = kEndofrawdatamarker;
- buf[nw++] = kEndofrawdatamarker;
- buf[nw++] = kEndofrawdatamarker;
+ buf[nw++] = 0x00000000; // fFee->GetRawDataEndmarker();
+ buf[nw++] = 0x00000000; // fFee->GetRawDataEndmarker();
+ buf[nw++] = 0x00000000; // fFee->GetRawDataEndmarker();
+ buf[nw++] = 0x00000000; // fFee->GetRawDataEndmarker();
} else {
- of++;
+ of++;
}
+ if (tracklet_on) {
+ delete [] tempBuffer;
+ delete tempof;
+ delete tempnw;
+ }
+
if (of != 0) {
- AliError("Buffer overflow. Data is truncated. Please increase buffer size and recompile.");
+ AliError("Buffer overflow. Data is truncated. Please increase buffer size and recompile.");
}
return nw;
}
-
//_____________________________________________________________________________
Int_t AliTRDrawData::ProduceHcDataV1andV2(AliTRDarrayADC *digits, Int_t side
, Int_t det, UInt_t *buf, Int_t maxSize)
AliTRDdigitsManager* digitsManager = new AliTRDdigitsManager();
digitsManager->CreateArrays();
- //AliTRDrawOldStream input(rawReader);
- // AliTRDRawStreamV2 input(rawReader);
- // input.SetRawVersion( fFee->GetRAWversion() );
- // input.Init();
-
AliTRDrawStreamBase *pinput = AliTRDrawStreamBase::GetRawStream(rawReader);
AliTRDrawStreamBase &input = *pinput;
input.SetRawVersion( fFee->GetRAWversion() ); //<= ADDED by MinJung
AliTRDdigitsManager* digitsManager = new AliTRDdigitsManager();
digitsManager->CreateArrays();
- //AliTRDrawOldStream input(rawReader);
- AliTRDRawStreamV2 input(rawReader);
+ AliTRDrawOldStream input(rawReader);
input.SetRawVersion( fFee->GetRAWversion() );
input.Init();
return digitsManager;
}
+
+
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff