#include "AliTRDgeometry.h"
#include "AliTRDdataArrayI.h"
#include "AliTRDdataArrayS.h"
+#include "AliTRDrawStreamBase.h"
#include "AliTRDRawStream.h"
#include "AliTRDRawStreamV2.h"
#include "AliTRDcalibDB.h"
// Buffer to temporary store half chamber data
UInt_t *hcBuffer = new UInt_t[kMaxHcWords];
+
+ Bool_t newEvent = kFALSE; // only for correct readout tree
// sect is same as iDDL, so I use only sect here.
for (Int_t sect = 0; sect < fGeo->Nsect(); sect++) {
// Reset payload byte size (payload does not include header).
Int_t npayloadbyte = 0;
+
+
// GTU common data header (5x4 bytes per super module, shows link mask)
for( Int_t cham = 0; cham < fGeo->Ncham(); cham++ ) {
UInt_t gtuCdh = (UInt_t)(0xe << 28);
for( Int_t plan = 0; plan < fGeo->Nplan(); plan++) {
Int_t iDet = fGeo->GetDetector(plan, cham, sect);
+
// If chamber status is ok, we assume that the optical link is also OK.
// This is shown in the GTU link mask.
if ( AliTRDcalibDB::Instance()->GetChamberStatus(iDet) )
for( Int_t plan = 0; plan < fGeo->Nplan(); plan++) {
Int_t iDet = fGeo->GetDetector(plan,cham,sect);
-
- // Get the digits array
+ if (iDet == 0) newEvent = kTRUE; // it is expected that each event has at least one tracklet; this is only needed for correct readout tree
+ // Get the digits array
AliTRDdataArrayS *digits = (AliTRDdataArrayS *) digitsManager->GetDigits(iDet);
- if (digits->HasData()) {
+ if (digits->HasData() ) { // second part is new!! and is for indicating a new event
digits->Expand();
hcwords = ProduceHcDataV1andV2(digits,0,iDet,hcBuffer,kMaxHcWords);
}
if ( rv == 3 ) {
- hcwords = ProduceHcDataV3 (digits,0,iDet,hcBuffer,kMaxHcWords);
+
+ //hcwords = ProduceHcDataV3 (digits,0,iDet,hcBuffer,kMaxHcWords,newEvent);
+ hcwords = ProduceHcDataV3 (digits,0,iDet,hcBuffer,kMaxHcWords);
+ if(newEvent == kTRUE) newEvent = kFALSE;
}
of->WriteBuffer((char *) hcBuffer, hcwords*4);
hcwords = ProduceHcDataV1andV2(digits,1,iDet,hcBuffer,kMaxHcWords);
}
if ( rv >= 3 ) {
- hcwords = ProduceHcDataV3 (digits,1,iDet,hcBuffer,kMaxHcWords);
+
+ //hcwords = ProduceHcDataV3 (digits,1,iDet,hcBuffer,kMaxHcWords,newEvent);
+ hcwords = ProduceHcDataV3 (digits,1,iDet,hcBuffer,kMaxHcWords);
}
of->WriteBuffer((char *) hcBuffer, hcwords*4);
}
//_____________________________________________________________________________
-Int_t AliTRDrawData::ProduceHcDataV3(AliTRDdataArrayS *digits, Int_t side
- , Int_t det, UInt_t *buf, Int_t maxSize)
+
+Int_t AliTRDrawData::ProduceHcDataV3(AliTRDdataArrayS *digits, Int_t side , Int_t det, UInt_t *buf, Int_t maxSize)
+//Int_t AliTRDrawData::ProduceHcDataV3(AliTRDdataArrayS *digits, Int_t side , Int_t det, UInt_t *buf, Int_t maxSize, Bool_t newEvent)
{
//
// This function simulates: Raw Version == 3 (Zero Suppression Prototype)
const Int_t kNTBin = AliTRDcalibDB::Instance()->GetNumberOfTimeBins();
Int_t kCtype = 0; // Chamber type (0:C0, 1:C1)
//Int_t iEv = 0xA; // Event ID. Now fixed to 10, how do I get event id?
- UInt_t x = 0; // General used number
- Int_t rv = fFee->GetRAWversion();
+
+
+
+ Bool_t tracklet_on = fFee->GetTracklet(); // **new**
// Check the nCol and nRow.
if ((nCol == 144) &&
AliDebug(1,Form("Producing raw data for sect=%d plan=%d cham=%d side=%d"
,sect,plan,cham,side));
- // Tracklet should be processed here but not implemented yet
-
- // Write end of tracklet marker
- if (nw < maxSize) {
- buf[nw++] = kEndoftrackletmarker;
- }
- else {
- of++;
- }
+ AliTRDmcmSim** mcm = new AliTRDmcmSim*[(kCtype + 3)*(fGeo->MCMmax())];
- // Half Chamber header
- // h[0] (there are 3 HC header)
- Int_t minorv = 0; // The minor version number
- Int_t add = 2; // The number of additional header words to follow
- x = (1<<31) | (rv<<24) | (minorv<<17) | (add<<14) | (sect<<9) | (plan<<6) | (cham<<3) | (side<<2) | 1;
- if (nw < maxSize) {
- buf[nw++] = x;
- }
- else {
- of++;
- }
- // h[1]
- Int_t bcCtr = 99; // bunch crossing counter. Here it is set to 99 always for no reason
- Int_t ptCtr = 15; // pretrigger counter. Here it is set to 15 always for no reason
- Int_t ptPhase = 11; // pretrigger phase. Here it is set to 11 always for no reason
- x = (bcCtr<<16) | (ptCtr<<12) | (ptPhase<<8) | ((kNTBin-1)<<2) | 1;
- if (nw < maxSize) {
- buf[nw++] = x;
- }
- else {
- of++;
- }
- // h[2]
- Int_t pedSetup = 1; // Pedestal filter setup (0:1). Here it is always 1 for no reason
- Int_t gainSetup = 1; // Gain filter setup (0:1). Here it is always 1 for no reason
- Int_t tailSetup = 1; // Tail filter setup (0:1). Here it is always 1 for no reason
- Int_t xtSetup = 0; // Cross talk filter setup (0:1). Here it is always 0 for no reason
- Int_t nonlinSetup = 0; // Nonlinearity filter setup (0:1). Here it is always 0 for no reason
- Int_t bypassSetup = 0; // Filter bypass (for raw data) setup (0:1). Here it is always 0 for no reason
- Int_t commonAdditive = 10; // Digital filter common additive (0:63). Here it is always 10 for no reason
- x = (pedSetup<<31) | (gainSetup<<30) | (tailSetup<<29) | (xtSetup<<28) | (nonlinSetup<<27)
- | (bypassSetup<<26) | (commonAdditive<<20) | 1;
- if (nw < maxSize) {
- buf[nw++] = x;
- }
- else {
- of++;
+ // in case no tracklet-words are processed: write the tracklet-endmarker as well as all additional words immediately and write
+ // raw-data in one go; if tracklet-processing is enabled, first all tracklet-words of a half-chamber have to be processed before the
+ // additional words (tracklet-endmarker,headers,...)are written. Raw-data is written in a second loop;
+
+ if (!tracklet_on) {
+ WriteIntermediateWords(buf,nw,of,maxSize,det,side);
}
-
+
// Scan for ROB and MCM
- for (Int_t iRobRow = 0; iRobRow < (kCtype + 3); iRobRow++ ) {
+ // scanning direction such, that tracklet-words are sorted in ascending z and then in ascending y order
+ // ROB numbering on chamber and MCM numbering on ROB increase with decreasing z and increasing y
+ for (Int_t iRobRow = (kCtype + 3)-1; iRobRow >= 0; iRobRow-- ) {
Int_t iRob = iRobRow * 2 + side;
- for (Int_t iMcm = 0; iMcm < fGeo->MCMmax(); iMcm++ ) {
-
- AliTRDmcmSim *mcm = new AliTRDmcmSim();
- mcm->Init( det, iRob, iMcm );
- Int_t padrow = mcm->GetRow();
+ // MCM on one ROB
+ for (Int_t iMcmRB = 0; iMcmRB < fGeo->MCMmax(); iMcmRB++ ) {
+ Int_t iMcm = 16 - 4*(iMcmRB/4 + 1) + (iMcmRB%4);
+ Int_t entry = iRobRow*(fGeo->MCMmax()) + iMcm;
+
+ mcm[entry] = new AliTRDmcmSim();
+ //mcm[entry]->Init( det, iRob, iMcm , newEvent);
+ mcm[entry]->Init( det, iRob, iMcm);
+ //if (newEvent == kTRUE) newEvent = kFALSE; // only one mcm is concerned with new event
+ Int_t padrow = mcm[entry]->GetRow();
+
+ // Copy ADC data to MCM simulator
+ for (Int_t iAdc = 0; iAdc < 21; iAdc++ ) {
+ Int_t padcol = mcm[entry]->GetCol( iAdc );
+ if ((padcol >= 0) && (padcol < nCol)) {
+ for (Int_t iT = 0; iT < kNTBin; iT++) {
+ mcm[entry]->SetData( iAdc, iT, digits->GetDataUnchecked( padrow, padcol, iT) );
+ }
+ }
+ else { // this means it is out of chamber, and masked ADC
+ mcm[entry]->SetDataPedestal( iAdc );
+ }
+ }
- // Copy ADC data to MCM simulator
- for (Int_t iAdc = 0; iAdc < 21; iAdc++ ) {
- Int_t padcol = mcm->GetCol( iAdc );
- if ((padcol >= 0) && (padcol < nCol)) {
- for (Int_t iT = 0; iT < kNTBin; iT++) {
- mcm->SetData( iAdc, iT, digits->GetDataUnchecked( padrow, padcol, iT) );
- }
- } else { // this means it is out of chamber, and masked ADC
- mcm->SetDataPedestal( iAdc );
+ // Simulate process in MCM
+ mcm[entry]->Filter(); // Apply filter
+ mcm[entry]->ZSMapping(); // Calculate zero suppression mapping
+
+ if (tracklet_on) {
+ mcm[entry]->Tracklet();
+ Int_t tempNw = mcm[entry]->ProduceTrackletStream( &buf[nw], maxSize - nw );
+ //Int_t tempNw = 0;
+ if( tempNw < 0 ) {
+ of += tempNw;
+ nw += maxSize - nw;
+ AliError(Form("Buffer overflow detected. Please increase the buffer size and recompile."));
+ } else {
+ nw += tempNw;
+ }
}
- }
- // Simulate process in MCM
- mcm->Filter(); // Apply filter
- mcm->ZSMapping(); // Calculate zero suppression mapping
- //mcm->DumpData( "trdmcmdata.txt", "RFZS" ); // debugging purpose
-
- // Write MCM data to buffer
- Int_t tempNw = mcm->ProduceRawStream( &buf[nw], maxSize - nw );
- if( tempNw < 0 ) {
- of += tempNw;
- nw += maxSize - nw;
- AliError(Form("Buffer overflow detected. Please increase the buffer size and recompile."));
- } else {
- nw += tempNw;
- }
+ // no tracklets: write raw-data already in this loop
+ else {
+ // Write MCM data to buffer
+ Int_t tempNw = mcm[entry]->ProduceRawStream( &buf[nw], maxSize - nw );
+ if( tempNw < 0 ) {
+ of += tempNw;
+ nw += maxSize - nw;
+ AliError(Form("Buffer overflow detected. Please increase the buffer size and recompile."));
+ } else {
+ nw += tempNw;
+ }
+
+ delete mcm[entry];
+ }
+
+
- delete mcm;
+ //mcm->DumpData( "trdmcmdata.txt", "RFZS" ); // debugging purpose
}
}
+ // if tracklets are switched on, raw-data can be written only after all tracklets
+ if (tracklet_on) {
+ WriteIntermediateWords(buf,nw,of,maxSize,det,side);
+
+
+ // Scan for ROB and MCM
+ for (Int_t iRobRow = (kCtype + 3)-1; iRobRow >= 0; iRobRow-- ) {
+ //Int_t iRob = iRobRow * 2 + side;
+ // MCM on one ROB
+ for (Int_t iMcmRB = 0; iMcmRB < fGeo->MCMmax(); iMcmRB++ ) {
+ Int_t iMcm = 16 - 4*(iMcmRB/4 + 1) + (iMcmRB%4);
+
+ Int_t entry = iRobRow*(fGeo->MCMmax()) + iMcm;
+
+ // Write MCM data to buffer
+ Int_t tempNw = mcm[entry]->ProduceRawStream( &buf[nw], maxSize - nw );
+ if( tempNw < 0 ) {
+ of += tempNw;
+ nw += maxSize - nw;
+ AliError(Form("Buffer overflow detected. Please increase the buffer size and recompile."));
+ } else {
+ nw += tempNw;
+ }
+
+ delete mcm[entry];
+
+ }
+ }
+ }
+
+ delete [] mcm;
+
// Write end of raw data marker
if (nw < maxSize) {
buf[nw++] = kEndofrawdatamarker;
AliError("Buffer overflow. Data is truncated. Please increase buffer size and recompile.");
}
+
return nw;
}
AliTRDdataArrayI *track1 = 0;
AliTRDdataArrayI *track2 = 0;
+ //AliTRDSignalIndex *indexes = 0;
+ // Create the digits manager
+ AliTRDdigitsManager* digitsManager = new AliTRDdigitsManager();
+ digitsManager->CreateArrays();
+
+ //AliTRDRawStream input(rawReader);
+ // AliTRDRawStreamV2 input(rawReader);
+ // input.SetRawVersion( fFee->GetRAWversion() );
+ // input.Init();
+
+ AliTRDrawStreamBase *pinput = AliTRDrawStreamBase::GetRawStream(rawReader);
+ AliTRDrawStreamBase &input = *pinput;
+
+ AliInfo(Form("Stream version: %s", input.IsA()->GetName()));
+
+ // Loop through the digits
+ Int_t det = 0;
+
+ while (det >= 0)
+ {
+ det = input.NextChamber(digitsManager);
+ if (det >= 0)
+ {
+ // get...
+ digits = (AliTRDdataArrayS *) digitsManager->GetDigits(det);
+ track0 = (AliTRDdataArrayI *) digitsManager->GetDictionary(det,0);
+ track1 = (AliTRDdataArrayI *) digitsManager->GetDictionary(det,1);
+ track2 = (AliTRDdataArrayI *) digitsManager->GetDictionary(det,2);
+ // and compress
+ if (digits) digits->Compress(1,0);
+ if (track0) track0->Compress(1,0);
+ if (track1) track1->Compress(1,0);
+ if (track2) track2->Compress(1,0);
+ }
+ }
+
+ delete pinput;
+ pinput = NULL;
+
+ return digitsManager;
+}
+
+
+//_____________________________________________________________________________
+void AliTRDrawData::WriteIntermediateWords(UInt_t* buf, Int_t& nw, Int_t& of, const Int_t& maxSize, const Int_t& det, const Int_t& side) {
+
+ Int_t plan = fGeo->GetPlane( det ); // Plane
+ Int_t cham = fGeo->GetChamber( det ); // Chamber
+ Int_t sect = fGeo->GetSector( det ); // Sector (=iDDL)
+ Int_t rv = fFee->GetRAWversion();
+ const Int_t kNTBin = AliTRDcalibDB::Instance()->GetNumberOfTimeBins();
+ UInt_t x = 0;
+
+ // Write end of tracklet marker
+ if (nw < maxSize) {
+ buf[nw++] = kEndoftrackletmarker;
+ }
+ else {
+ of++;
+ }
+
+ // Half Chamber header
+ // h[0] (there are 3 HC header)
+ Int_t minorv = 0; // The minor version number
+ Int_t add = 2; // The number of additional header words to follow
+ x = (1<<31) | (rv<<24) | (minorv<<17) | (add<<14) | (sect<<9) | (plan<<6) | (cham<<3) | (side<<2) | 1;
+ if (nw < maxSize) {
+ buf[nw++] = x;
+ }
+ else {
+ of++;
+ }
+ // h[1]
+ Int_t bcCtr = 99; // bunch crossing counter. Here it is set to 99 always for no reason
+ Int_t ptCtr = 15; // pretrigger counter. Here it is set to 15 always for no reason
+ Int_t ptPhase = 11; // pretrigger phase. Here it is set to 11 always for no reason
+ x = (bcCtr<<16) | (ptCtr<<12) | (ptPhase<<8) | ((kNTBin-1)<<2) | 1;
+ if (nw < maxSize) {
+ buf[nw++] = x;
+ }
+ else {
+ of++;
+ }
+ // h[2]
+ Int_t pedSetup = 1; // Pedestal filter setup (0:1). Here it is always 1 for no reason
+ Int_t gainSetup = 1; // Gain filter setup (0:1). Here it is always 1 for no reason
+ Int_t tailSetup = 1; // Tail filter setup (0:1). Here it is always 1 for no reason
+ Int_t xtSetup = 0; // Cross talk filter setup (0:1). Here it is always 0 for no reason
+ Int_t nonlinSetup = 0; // Nonlinearity filter setup (0:1). Here it is always 0 for no reason
+ Int_t bypassSetup = 0; // Filter bypass (for raw data) setup (0:1). Here it is always 0 for no reason
+ Int_t commonAdditive = 10; // Digital filter common additive (0:63). Here it is always 10 for no reason
+ x = (pedSetup<<31) | (gainSetup<<30) | (tailSetup<<29) | (xtSetup<<28) | (nonlinSetup<<27)
+ | (bypassSetup<<26) | (commonAdditive<<20) | 1;
+ if (nw < maxSize) {
+ buf[nw++] = x;
+ }
+ else {
+ of++;
+ }
+}
+
+
+//_____________________________________________________________________________
+AliTRDdigitsManager *AliTRDrawData::Raw2DigitsOLD(AliRawReader *rawReader)
+{
+ //
+ // Vx of the raw data reading
+ //
+
+ AliTRDdataArrayS *digits = 0;
+ AliTRDdataArrayI *track0 = 0;
+ AliTRDdataArrayI *track1 = 0;
+ AliTRDdataArrayI *track2 = 0;
+
AliTRDSignalIndex *indexes = 0;
// Create the digits manager
AliTRDdigitsManager* digitsManager = new AliTRDdigitsManager();
return digitsManager;
}
+
+
+
+
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff