#include "AliCDBMetaData.h"
#include "AliDCSValue.h"
#include "AliAlignObj.h"
-#include "AliAlignObjAngles.h"
+#include "AliAlignObjParams.h"
#include "AliLog.h"
#include "AliZDCDataDCS.h"
-#include "AliZDCCalibData.h"
+#include "AliZDCChMap.h"
+#include "AliZDCPedestals.h"
+#include "AliZDCLaserCalib.h"
+#include "AliZDCCalib.h"
-//
-// Class implementing ZDC pre-processor.
-// It takes data from DCS and passes it to the class AliZDCDataDCS.
-// The class is then written to the CDB.
-//
+/////////////////////////////////////////////////////////////////////
+// //
+// Class implementing ZDC pre-processor. //
+// It takes data from DCS and passes it to the class AliZDCDataDCS //
+// The class is then written to the CDB. //
+// //
+/////////////////////////////////////////////////////////////////////
ClassImp(AliZDCPreprocessor)
//______________________________________________________________________________________________
-AliZDCPreprocessor::AliZDCPreprocessor(const char* detector, AliShuttleInterface* shuttle) :
- AliPreprocessor(detector, shuttle),
+AliZDCPreprocessor::AliZDCPreprocessor(AliShuttleInterface* shuttle) :
+ AliPreprocessor("ZDC", shuttle),
fData(0)
{
// constructor
+ AddRunType("STANDALONE_PEDESTAL");
+ AddRunType("STANDALONE_LASER");
+ AddRunType("STANDALONE_EMD");
+ AddRunType("STANDALONE_COSMIC");
+ AddRunType("STANDALONE_BC");
+ AddRunType("PHYSICS");
}
+
//______________________________________________________________________________________________
AliZDCPreprocessor::~AliZDCPreprocessor()
{
fData = new AliZDCDataDCS(fRun, fStartTime, fEndTime);
}
+//______________________________________________________________________________________________
+UInt_t AliZDCPreprocessor::ProcessChMap(TString runType)
+{
+ // Reading the file for mapping from FXS
+ TList* daqSource = GetFileSources(kDAQ, runType.Data());
+ if(!daqSource){
+ AliError(Form("No sources run %d for run type %s!", fRun, runType.Data()));
+ return 1;
+ }
+ Log("\t List of sources "); daqSource->Print();
+ //
+ TIter iter(daqSource);
+ TObjString* source = 0;
+ Int_t isou=0;
+ Int_t res=999;
+ Int_t readMap[48][6];
+ //
+ while((source = dynamic_cast<TObjString*> (iter.Next()))){
+ Log(Form("\n\t Getting file #%d\n",++isou));
+ TString fileName = "ZDCChMapping.dat";
+
+ if(fileName.Length() <= 0){
+ Log(Form("No file from source %s!", source->GetName()));
+ return 1;
+ }
+ // --- Reading file with calibration data
+ //const char* fname = fileName.Data();
+ if(fileName){
+ FILE *file;
+ if((file = fopen(fileName,"r")) == NULL){
+ printf("Cannot open file %s \n",fileName.Data());
+ return 1;
+ }
+ Log(Form("File %s connected to process data for ADC mapping", fileName.Data()));
+ //
+ for(Int_t j=0; j<48; j++){
+ for(Int_t k=0; k<6; k++){
+ fscanf(file,"%d",&readMap[j][k]);
+ }
+ }
+ fclose(file);
+ }
+ else{
+ Log(Form("File %s not found", fileName.Data()));
+ return 1;
+ }
+ }
+ delete daqSource; daqSource=0;
+
+ // Store the currently read map ONLY IF it is different
+ // from the entry in the OCDB
+ Bool_t updateOCDB = kFALSE;
+
+ AliCDBEntry *cdbEntry = GetFromOCDB("Calib","ChMap");
+ if(!cdbEntry){
+ Log("\t AliZDCPreprocessor -> WARNING! No CDB entry for ch. mapping\n");
+ updateOCDB = kTRUE;
+ }
+ else{
+ AliZDCChMap *chMap = (AliZDCChMap*) cdbEntry->GetObject();
+ for(Int_t i=0; i<48; i++){
+ if( (readMap[i][1] == chMap->GetADCModule(i))
+ && (readMap[i][2] == chMap->GetADCChannel(i))
+ && (readMap[i][4] == chMap->GetDetector(i))
+ && (readMap[i][5] == chMap->GetSector(i))){
+ updateOCDB = kFALSE;
+ }
+ else updateOCDB = kTRUE;
+ }
+ }
+ //
+ if(updateOCDB==kTRUE){
+ Log("\t AliZDCPreprocessor -> A new entry ZDC/Calib/ChMap will be created");
+ //
+ // --- Initializing mapping calibration object
+ AliZDCChMap *mapCalib = new AliZDCChMap("ZDC");
+ // Writing channel map in the OCDB
+ for(Int_t k=0; k<48; k++){
+ mapCalib->SetADCModule(k,readMap[k][1]);
+ mapCalib->SetADCChannel(k,readMap[k][2]);
+ mapCalib->SetDetector(k,readMap[k][4]);
+ mapCalib->SetSector(k,readMap[k][5]);
+ }
+ //mapCalib->Print("");
+ //
+ AliCDBMetaData metaData;
+ metaData.SetBeamPeriod(0);
+ metaData.SetResponsible("Chiara Oppedisano");
+ metaData.SetComment("Filling AliZDCChMap object");
+ //
+ res = Store("Calib","ChMap",mapCalib, &metaData, 0, 1);
+ }
+ else{
+ Log("\t AliZDCPreprocessor -> ZDC/Calib/ChMap entry in OCDB is valid and won't be updated\n");
+ res = kTRUE;
+ }
+
+
+ return res;
+
+}
+
//______________________________________________________________________________________________
UInt_t AliZDCPreprocessor::Process(TMap* dcsAliasMap)
{
// *************** From DCS ******************
// Fills data into a AliZDCDataDCS object
if(!dcsAliasMap) return 1;
-
+ printf("Processing data from DCS\n");
+
// The processing of the DCS input data is forwarded to AliZDCDataDCS
- Float_t DCSValues[26];
- fData->ProcessData(*dcsAliasMap, DCSValues);
+ Float_t dcsValues[28]; // DCSAliases=28
+ fData->SetCalibData(dcsValues);
+ fData->ProcessData(*dcsAliasMap);
// Store DCS data for reference
AliCDBMetaData metadata;
metadata.SetResponsible("Chiara Oppedisano");
metadata.SetComment("DCS data for ZDC");
- Bool_t resStore = kFALSE;
- resStore = StoreReferenceData("DCS","Data",fData,&metadata);
- //dcsAliasMap->Print("");
- //
+ Bool_t resDCSRef = kTRUE;
+ resDCSRef = StoreReferenceData("DCS","Data",fData,&metadata);
+ dcsAliasMap->Print("");
+
// --- Writing ZDC table positions into alignment object
- TClonesArray *array = new TClonesArray("AliAlignObjAngles",10);
+ TClonesArray *array = new TClonesArray("AliAlignObjParams",10);
TClonesArray &alobj = *array;
- AliAlignObjAngles a;
+ AliAlignObjParams a;
Double_t dx=0., dz=0., dpsi=0., dtheta=0., dphi=0.;
// Vertical table position in mm from DCS
- Double_t dyZN1 = (Double_t) (DCSValues[0]/10.);
- Double_t dyZP1 = (Double_t) (DCSValues[1]/10.);
- Double_t dyZN2 = (Double_t) (DCSValues[2]/10.);
- Double_t dyZP2 = (Double_t) (DCSValues[3]/10.);
- const char *ZDCn1="ZDC/NeutronZDC1";
- const char *ZDCp1="ZDC/ProtonZDC1";
- const char *ZDCn2="ZDC/NeutronZDC2";
- const char *ZDCp2="ZDC/ProtonZDC2";
+ Double_t dyZN1 = (Double_t) (dcsValues[0]/10.);
+ Double_t dyZP1 = (Double_t) (dcsValues[1]/10.);
+ Double_t dyZN2 = (Double_t) (dcsValues[2]/10.);
+ Double_t dyZP2 = (Double_t) (dcsValues[3]/10.);
+ //
+
+ const char *n1ZDC="ZDC/NeutronZDC_C";
+ const char *p1ZDC="ZDC/ProtonZDC_C";
+ const char *n2ZDC="ZDC/NeutronZDC_A";
+ const char *p2ZDC="ZDC/ProtonZDC_A";
+ //
UShort_t iIndex=0;
AliGeomManager::ELayerID iLayer = AliGeomManager::kInvalidLayer;
UShort_t volid = AliGeomManager::LayerToVolUID(iLayer,iIndex);
//
- new(alobj[0]) AliAlignObjAngles(ZDCn1, volid, dx, dyZN1, dz, dpsi, dtheta, dphi, kTRUE);
- new(alobj[1]) AliAlignObjAngles(ZDCp1, volid, dx, dyZP1, dz, dpsi, dtheta, dphi, kTRUE);
- new(alobj[2]) AliAlignObjAngles(ZDCn2, volid, dx, dyZN2, dz, dpsi, dtheta, dphi, kTRUE);
- new(alobj[3]) AliAlignObjAngles(ZDCp2, volid, dx, dyZP2, dz, dpsi, dtheta, dphi, kTRUE);
+ new(alobj[0]) AliAlignObjParams(n1ZDC, volid, dx, dyZN1, dz, dpsi, dtheta, dphi, kTRUE);
+ new(alobj[1]) AliAlignObjParams(p1ZDC, volid, dx, dyZP1, dz, dpsi, dtheta, dphi, kTRUE);
+ new(alobj[2]) AliAlignObjParams(n2ZDC, volid, dx, dyZN2, dz, dpsi, dtheta, dphi, kTRUE);
+ new(alobj[3]) AliAlignObjParams(p2ZDC, volid, dx, dyZP2, dz, dpsi, dtheta, dphi, kTRUE);
+
// save in CDB storage
AliCDBMetaData md;
md.SetResponsible("Chiara Oppedisano");
md.SetComment("Alignment object for ZDC");
- Bool_t resultAl = kFALSE;
+ Bool_t resultAl = kTRUE;
resultAl = Store("Align","Data", array, &md, 0, 0);
- // --- Writing ZDC PTMs HV values into calibration object
- AliZDCCalibData *calibdata = new AliZDCCalibData("ZDC");
- for(Int_t j=0; j<22; j++)
- calibdata->SetPMTHVVal(j,DCSValues[j+4]);
-
-
- // *************** From DAQ ******************
- // [a] PEDESTALS
+// *************** From DAQ ******************
+Bool_t resChMap=kTRUE, resPedCal=kTRUE, resLaserCal=kTRUE, resECal=kTRUE;
+//
+const char* beamType = GetRunParameter("beamType");
TString runType = GetRunType();
-if (runType != "PEDESTALS") {
+printf("\n\t AliZDCPreprocessor -> beamType %s\n",beamType);
+printf("\t AliZDCPreprocessor -> runType %s\n\n",runType.Data());
+
+if(strcmp(beamType,"p-p")==0){
+
+ // --- Cheking if there is already the entry in the OCDB
+ AliCDBEntry *cdbEntry = GetFromOCDB("Calib", "EMDCalib");
+ if(!cdbEntry){
+ printf("\t AliZDCPreprocessor -> ZDC/Calib/EMDCalib entry will be created\n");
+ // --- Initializing calibration object
+ AliZDCCalib *eCalib = new AliZDCCalib("ZDC");
+ //
+ for(Int_t j=0; j<6; j++) eCalib->SetEnCalib(j,1.);
+ for(Int_t j=0; j<5; j++){
+ eCalib->SetZN1EqualCoeff(j, 1.);
+ eCalib->SetZP1EqualCoeff(j, 1.);
+ eCalib->SetZN2EqualCoeff(j, 1.);
+ eCalib->SetZP2EqualCoeff(j, 1.);
+ }
+ //eCalib->Print("");
+ //
+ AliCDBMetaData metaData;
+ metaData.SetBeamPeriod(0);
+ metaData.SetResponsible("Chiara Oppedisano");
+ metaData.SetComment("AliZDCCalib object");
+ //
+ resECal = Store("Calib","EMDCalib",eCalib, &metaData, 0, 1);
+ }
+ else{
+ printf("\t AliZDCPreprocessor -> ZDC/Calib/EMDCalib object already existing in OCDB!!!\n");
+ resECal = kTRUE;
+ }
+}
+// ******************************************
+// ZDC ADC channel mapping
+// ******************************************
+resChMap = ProcessChMap(runType);
+//
+// *****************************************************
+// [a] PEDESTALS -> Pedestal subtraction
+// *****************************************************
+//
+if(runType=="STANDALONE_PEDESTAL"){
TList* daqSources = GetFileSources(kDAQ, "PEDESTALS");
if(!daqSources){
- Log(Form("No source for PEDESTALS run %d !", fRun));
- return 0;
+ Log(Form("No source for STANDALONE_PEDESTAL run %d !", fRun));
+ return 1;
}
- Log("\t List of sources for PEDESTALS");
+ Log("\t List of sources for STANDALONE_PEDESTAL");
daqSources->Print();
//
TIter iter(daqSources);
TString stringPedFileName = GetFile(kDAQ, "PEDESTALS", source->GetName());
if(stringPedFileName.Length() <= 0){
Log(Form("No PEDESTAL file from source %s!", source->GetName()));
- return 0;
+ return 1;
}
- const char* PedFileName = stringPedFileName.Data();
- const Int_t NZDCch = 44;
- if(PedFileName){
+ // --- Initializing pedestal calibration object
+ AliZDCPedestals *pedCalib = new AliZDCPedestals("ZDC");
+ // --- Reading file with pedestal calibration data
+ const char* pedFileName = stringPedFileName.Data();
+ // no. ADCch = (22 signal ch. + 2 reference PMs) * 2 gain chain = 48
+ const Int_t knZDCch = 48;
+ if(pedFileName){
FILE *file;
- if((file = fopen(PedFileName,"r")) == NULL){
- printf("Cannot open file %s \n",PedFileName);
- return 0;
+ if((file = fopen(pedFileName,"r")) == NULL){
+ printf("Cannot open file %s \n",pedFileName);
+ return 1;
}
- Log(Form("File %s connected to analyze pedestal events", PedFileName));
- Float_t PedVal[(3*NZDCch)][2];
- for(Int_t i=0; i<(3*NZDCch); i++){
+ Log(Form("File %s connected to process pedestal data", pedFileName));
+ Float_t pedVal[(2*knZDCch)][2];
+ for(Int_t k=0; k<(2*knZDCch); k++){
for(Int_t j=0; j<2; j++){
- fscanf(file,"%f",&PedVal[i][j]);
- //if(j==1) printf("PedVal[%d] -> %f, %f \n",i,PedVal[i][0],PedVal[i][1]);
+ fscanf(file,"%f",&pedVal[k][j]);
+ //if(j==1) printf("pedVal[%d] -> %f, %f \n",k,pedVal[k][0],pedVal[k][1]);
}
- if(i<NZDCch){
- calibdata->SetMeanPed(i,PedVal[i][0]);
- calibdata->SetMeanPedWidth(i,PedVal[i][1]);
+ if(k<knZDCch){
+ pedCalib->SetMeanPed(k,pedVal[k][0]);
+ pedCalib->SetMeanPedWidth(i,pedVal[k][1]);
}
- else if(i>=NZDCch && i<(2*NZDCch)){
- calibdata->SetOOTPed(i-NZDCch,PedVal[i][0]);
- calibdata->SetOOTPedWidth(i-NZDCch,PedVal[i][1]);
+ else if(k>=knZDCch && k<(2*knZDCch)){
+ pedCalib->SetOOTPed(k-knZDCch,pedVal[k][0]);
+ pedCalib->SetOOTPedWidth(k-knZDCch,pedVal[k][1]);
}
- else if(i>=(2*NZDCch) && i<(3*NZDCch)){
- calibdata->SetPedCorrCoeff(i-(2*NZDCch),PedVal[i][0],PedVal[i][1]);
+ else if(k>=(2*knZDCch) && k<(3*knZDCch)){
+ pedCalib->SetPedCorrCoeff(k-(2*knZDCch),pedVal[k][0],pedVal[k][1]);
}
}
+ fclose(file);
}
else{
- Log(Form("File %s not found", PedFileName));
- return 0;
+ Log(Form("File %s not found", pedFileName));
+ return 1;
}
//
- //calibdata->Print("");
+ //pedCalib->Print("");
+ //
+ AliCDBMetaData metaData;
+ metaData.SetBeamPeriod(0);
+ metaData.SetResponsible("Chiara Oppedisano");
+ metaData.SetComment("Filling AliZDCPedestals object");
+ //
+ resPedCal = Store("Calib","Pedestals",pedCalib, &metaData, 0, 1);
}
delete daqSources; daqSources = 0;
}
- // [b] EMD EVENTS
-else if (runType == "EMDCALIB") {
- TList* daqSources = GetFileSources(kDAQ, "EMDCALIB");
+// *****************************************************
+// [b] STANDALONE_LASER EVENTS -> Signal stability
+// *****************************************************
+else if(runType=="STANDALONE_LASER"){
+ TList* daqSources = GetFileSources(kDAQ, "LASER");
if(!daqSources){
- AliError(Form("No sources for EMDCALIB run %d !", fRun));
- return 0;
+ AliError(Form("No sources for STANDALONE_LASER run %d !", fRun));
+ return 1;
}
- Log("\t List of sources for EMDCALIB");
+ Log("\t List of sources for STANDALONE_LASER");
daqSources->Print();
//
TIter iter2(daqSources);
TObjString* source = 0;
- Int_t j=0;
+ Int_t i=0;
while((source = dynamic_cast<TObjString*> (iter2.Next()))){
- Log(Form("\n\t Getting file #%d\n",++j));
- TString stringEMDFileName = GetFile(kDAQ, "EMDCALIB", source->GetName());
- if(stringEMDFileName.Length() <= 0){
- Log(Form("No EMDCALIB file from source %s!", source->GetName()));
- return 0;
+ Log(Form("\n\t Getting file #%d\n",++i));
+ TString stringLASERFileName = GetFile(kDAQ, "LASER", source->GetName());
+ if(stringLASERFileName.Length() <= 0){
+ Log(Form("No LASER file from source %s!", source->GetName()));
+ return 1;
}
- const char* EMDFileName = stringEMDFileName.Data();
- if(EMDFileName){
+ // --- Initializing pedestal calibration object
+ AliZDCLaserCalib *lCalib = new AliZDCLaserCalib("ZDC");
+ // --- Reading file with pedestal calibration data
+ const char* laserFileName = stringLASERFileName.Data();
+ if(laserFileName){
FILE *file;
- if((file = fopen(EMDFileName,"r")) == NULL){
- printf("Cannot open file %s \n",EMDFileName);
- return 0;
+ if((file = fopen(laserFileName,"r")) == NULL){
+ printf("Cannot open file %s \n",laserFileName);
+ return 1;
}
- Log(Form("File %s connected to analyze EM dissociation events", EMDFileName));
- Float_t EMDFitVal[2];
- for(Int_t j=0; j<2; j++){
- fscanf(file,"%f",&EMDFitVal[j]);
- }
- calibdata->SetEnCalib(EMDFitVal);
+ Log(Form("File %s connected to process data from LASER events", laserFileName));
+ //
+ Float_t ivalRead[22][4];
+ for(Int_t j=0; j<22; j++){
+ for(Int_t k=0; k<4; k++){
+ fscanf(file,"%f",&ivalRead[j][k]);
+ //printf(" %d %1.0f ",k, ivalRead[j][k]);
+ }
+ lCalib->SetDetector(j, (Int_t) ivalRead[j][0]);
+ lCalib->SetSector(j, (Int_t) ivalRead[j][1]);
+ lCalib->SetfPMValue(j, ivalRead[j][2]);
+ lCalib->SetfPMWidth(j, ivalRead[j][3]);
+ }
+ fclose(file);
}
else{
- Log(Form("File %s not found", EMDFileName));
- return 0;
+ Log(Form("File %s not found", laserFileName));
+ return 1;
}
- //calibdata->Print("");
+ //lCalib->Print("");
+ //
+ AliCDBMetaData metaData;
+ metaData.SetBeamPeriod(0);
+ metaData.SetResponsible("Chiara Oppedisano");
+ metaData.SetComment("Filling AliZDCLaserCalib object");
+ //
+ resLaserCal = Store("Calib","LaserCalib",lCalib, &metaData, 0, 1);
+ }
+
+}
+// *****************************************************
+// [c] EMD EVENTS -> Energy calibration and equalization
+// *****************************************************
+else if(runType=="STANDALONE_EMD" && strcmp(beamType,"Pb-Pb")==0){
+ TList* daqSources = GetFileSources(kDAQ, "EMDCALIB");
+ if(!daqSources){
+ AliError(Form("No sources for STANDALONE_EMD run %d !", fRun));
+ return 1;
}
-}
+ Log("\t List of sources for STANDALONE_EMD");
+ daqSources->Print();
+ //
+ TIter iter2(daqSources);
+ TObjString* source = 0;
+ Int_t i=0;
+ while((source = dynamic_cast<TObjString*> (iter2.Next()))){
+ Log(Form("\n\t Getting file #%d\n",++i));
+ TString stringEMDFileName = GetFile(kDAQ, "EMDCALIB", source->GetName());
+ if(stringEMDFileName.Length() <= 0){
+ Log(Form("No EMDCALIB file from source %s!", source->GetName()));
+ return 1;
+ }
+ // --- Initializing pedestal calibration object
+ AliZDCCalib *eCalib = new AliZDCCalib("ZDC");
+ // --- Reading file with pedestal calibration data
+ const char* emdFileName = stringEMDFileName.Data();
+ if(emdFileName){
+ FILE *file;
+ if((file = fopen(emdFileName,"r")) == NULL){
+ printf("Cannot open file %s \n",emdFileName);
+ return 1;
+ }
+ Log(Form("File %s connected to process data from EM dissociation events", emdFileName));
+ //
+ Float_t fitValEMD[6]; Float_t equalCoeff[4][5];
+ Float_t calibVal[4];
+ for(Int_t j=0; j<10; j++){
+ if(j<6){
+ fscanf(file,"%f",&fitValEMD[j]);
+ if(j<4){
+ calibVal[j] = 2760./fitValEMD[j];
+ eCalib->SetEnCalib(j,calibVal[j]);
+ }
+ else eCalib->SetEnCalib(j,fitValEMD[j]);
+ }
+ else{
+ for(Int_t k=0; k<5; k++){
+ fscanf(file,"%f",&equalCoeff[j][k]);
+ if(j==6) eCalib->SetZN1EqualCoeff(k, equalCoeff[j][k]);
+ else if(j==7) eCalib->SetZP1EqualCoeff(k, equalCoeff[j][k]);
+ else if(j==8) eCalib->SetZN2EqualCoeff(k, equalCoeff[j][k]);
+ else if(j==9) eCalib->SetZP2EqualCoeff(k, equalCoeff[j][k]);
+ }
+ }
+ }
+ fclose(file);
+ }
+ else{
+ Log(Form("File %s not found", emdFileName));
+ return 1;
+ }
+ //eCalib->Print("");
+ //
+ AliCDBMetaData metaData;
+ metaData.SetBeamPeriod(0);
+ metaData.SetResponsible("Chiara Oppedisano");
+ metaData.SetComment("Filling AliZDCCalib object");
+ //
+ resECal = Store("Calib","EMDCalib",eCalib, &metaData, 0, 1);
+ }
+}
+
+
// note that the parameters are returned as character strings!
const char* nEvents = GetRunParameter("totalEvents");
if(nEvents) Log(Form("Number of events for run %d: %s",fRun, nEvents));
else Log(Form("Number of events not put in logbook!"));
-
- // Storing the final CDB file
- AliCDBMetaData metaData;
- metaData.SetBeamPeriod(0);
- metaData.SetResponsible("Chiara");
- metaData.SetComment("Filling AliZDCCalibData object");
-
- Bool_t resultCal = kFALSE;
- resultCal = Store("Calib","Data",calibdata, &metaData, 0, 1);
UInt_t result = 0;
- if(resultAl == kFALSE || resultCal == kFALSE){
- if(resultAl == kFALSE && resultCal == kFALSE ) result = 2;
- else result = 1;
+ if(resDCSRef==kFALSE || resultAl==kFALSE || resPedCal==kFALSE ||
+ resLaserCal==kFALSE || resECal==kFALSE || resChMap==kFALSE){
+ if(resDCSRef == kFALSE) result = 1;
+ else if(resultAl == kFALSE) result = 2;
+ else if(resChMap == kFALSE) result = 3;
+ else if(resPedCal == kFALSE) result = 4;
+ else if(resLaserCal == kFALSE) result = 5;
+ else if(resECal == kFALSE) result = 6;
}
return result;
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff