/*
$Log$
+Revision 1.6 2001/09/26 16:07:40 coppedis
+Changes in StepManager suggested by J.Chudoba
+
+Revision 1.5 2001/06/15 14:51:39 coppedis
+Geometry bug corrected
+
+Revision 1.4 2001/06/13 11:17:49 coppedis
+Bug corrected
+
+Revision 1.3 2001/06/13 11:11:02 coppedis
+Minor changes
+
+Revision 1.2 2001/06/12 13:45:11 coppedis
+TDI in correct position and minor correction
+
+Revision 1.1 2001/05/14 09:57:39 coppedis
+A different geometry for the ZDCs
+
*/
-///////////////////////////////////////////////////////////////////////////////
-// //
-// Zero Degree Calorimeter //
-// This class contains the basic functions for the ZDC //
-// Functions specific to one particular geometry are //
-// contained in the derived classes //
-// //
-///////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////
+// //
+// AliZDCv2 --- new ZDC geometry, //
+// with the EM ZDC at about 10 m from IP //
+// Just one set of ZDC is inserted //
+// (on the same side of the dimuon arm realtive to IP) //
+// //
+///////////////////////////////////////////////////////////////////////
// --- Standard libraries
#include "stdio.h"
// --- AliRoot classes
#include "AliZDCv2.h"
#include "AliZDCHit.h"
-#include "AliZDCDigit.h"
#include "AliRun.h"
#include "AliDetector.h"
#include "AliMagF.h"
ClassImp(AliZDCv2)
-
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// Zero Degree Calorimeter version 2 //
-// //
-///////////////////////////////////////////////////////////////////////////////
//_____________________________________________________________________________
AliZDCv2::AliZDCv2() : AliZDC()
}
// Parameters for hadronic calorimeters geometry
+ fDimZN[0] = 3.52;
+ fDimZN[1] = 3.52;
+ fDimZN[2] = 50.;
fDimZP[0] = 11.2;
fDimZP[1] = 6.;
fDimZP[2] = 75.;
fPosZN[0] = 0.;
- fPosZN[1] = -1.2;
+ fPosZN[1] = 1.2;
fPosZN[2] = 11650.;
- fPosZP[0] = -24.;
+ fPosZP[0] = -23.9;
fPosZP[1] = 0.;
fPosZP[2] = 11600.;
fFibZN[0] = 0.;
// Parameters for EM calorimeter geometry
fPosZEM[0] = 8.5;
fPosZEM[1] = 0.;
- fPosZEM[2] = -1000.;
+// fPosZEM[2] = -830.;
+ fPosZEM[2] = -735.;
+ fZEMLength = 0.;
-
- fDigits = new TClonesArray("AliZDCDigit",1000);
}
//_____________________________________________________________________________
conpar[0] = 0.;
conpar[1] = 360.;
conpar[2] = 2.;
- conpar[3] = -1100.;
+ conpar[3] = 2000.;
conpar[4] = 0.;
- conpar[5] = 155.;
+ conpar[5] = 55.;
conpar[6] = 13060.;
conpar[7] = 0.;
- conpar[8] = 155.;
+ conpar[8] = 55.;
gMC->Gsvolu("ZDC ", "PCON", idtmed[11], conpar, 9);
gMC->Gspos("ZDC ", 1, "ALIC", 0., 0., 0., 0, "ONLY");
boxpar[1] = 5.6;
boxpar[2] = 400./2.;
gMC->Gsvolu("QTD1", "BOX ", idtmed[7], boxpar, 3);
- gMC->Gspos("QTD1", 1, "ZDC ", 0., 10.6, tubpar[2] + zd1 + 56.3, 0, "ONLY");
- gMC->Gspos("QTD1", 2, "ZDC ", 0., -10.6, tubpar[2] + zd1 + 56.3, 0, "ONLY");
+ gMC->Gspos("QTD1", 1, "ZDC ", 3., 10.6, tubpar[2] + zd1 + 56.3, 0, "ONLY");
+ gMC->Gspos("QTD1", 2, "ZDC ", 3., -10.6, tubpar[2] + zd1 + 56.3, 0, "ONLY");
boxpar[0] = 0.2/2.;
boxpar[1] = 5.6;
boxpar[2] = 400./2.;
gMC->Gsvolu("QTD2", "BOX ", idtmed[6], boxpar, 3);
- gMC->Gspos("QTD2", 1, "ZDC ", 5.6+boxpar[0], 0., tubpar[2] + zd1 + 56.3, 0, "ONLY");
-
- tubspar[0] = 6.2;
- tubspar[1] = 6.4;
+ gMC->Gspos("QTD2", 1, "ZDC ", 8.6+boxpar[0], 0., tubpar[2] + zd1 + 56.3, 0, "ONLY");
+
+// tubspar[0] = 6.2; // R = 6.2 cm----------------------------------------
+// tubspar[1] = 6.4;
+// tubspar[2] = 400./2.;
+// tubspar[3] = 180.-62.5;
+// tubspar[4] = 180.+62.5;
+ tubspar[0] = 10.5; // R = 10.5 cm------------------------------------------
+ tubspar[1] = 10.7;
tubspar[2] = 400./2.;
- tubspar[3] = 180.-62.5;
- tubspar[4] = 180.+62.5;
+ tubspar[3] = 180.-75.5;
+ tubspar[4] = 180.+75.5;
gMC->Gsvolu("QTD3", "TUBS", idtmed[6], tubspar, 5);
- gMC->Gspos("QTD3", 1, "ZDC ", -3., 0., tubpar[2] + zd1 + 56.3, 0, "ONLY");
+ gMC->Gspos("QTD3", 1, "ZDC ", 0., 0., tubpar[2] + zd1 + 56.3, 0, "ONLY");
zd1 += tubpar[2] * 2.;
Float_t zb = -800.; // End of QBPM (from AliPIPEv0.cxx)
tubpar[0] = 8.0/2.;
tubpar[1] = 8.2/2.;
- tubpar[2] = (1000+zb)/2.; // From the end of QBPM to z=1000.
+ tubpar[2] = (1050+zb)/2.; // From the end of QBPM to z=1050.
gMC->Gsvolu("QT19", "TUBE", idtmed[7], tubpar, 3);
- gMC->Gspos("QT19", 1, "ZDC ", 0., 0., zb - tubpar[2], 0, "ONLY");
+ gMC->Gspos("QT19", 1, "ALIC", 0., 0., zb - tubpar[2], 0, "ONLY");
// -- END OF BEAM PIPE VOLUME DEFINITION.
// Parameters for hadronic calorimeters geometry
// NB -> parameters used ONLY in CreateZDC()
- Float_t fDimZN[3] = {3.52, 3.52, 50.}; // Dimensions of neutron detector
Float_t fGrvZN[3] = {0.03, 0.03, 50.}; // Grooves for neutron detector
Float_t fGrvZP[3] = {0.04, 0.04, 75.}; // Grooves for proton detector
Int_t fDivZN[3] = {11, 11, 0}; // Division for neutron detector
Float_t fFibRadZEM = 0.0315; // External fiber radius (including cladding)
Int_t fDivZEM[3] = {92, 0, 20}; // Divisions for EM detector
Float_t fDimZEM0 = 2*fDivZEM[2]*(fDimZEMPb+fDimZEMAir+fFibRadZEM*(TMath::Sqrt(2.)));
+ fZEMLength = fDimZEM0;
Float_t fDimZEM[6] = {fDimZEM0, 3.5, 3.5, 45., 0., 0.}; // Dimensions of EM detector
Float_t fFibZEM2 = fDimZEM[2]/TMath::Sin(fDimZEM[3]*kDegrad)-fFibRadZEM;
Float_t fFibZEM[3] = {0., 0.0275, fFibZEM2}; // Fibers for EM calorimeter
gMC->Gspos("ZEV1", 1,"ZETR", -DimVoid[0]+zTran, 0., DisplFib, 0, "ONLY");
// --- Positioning the ZEM into the ZDC - rotation for 90 degrees
- gMC->Gspos("ZEM ", 1,"ZDC ", fPosZEM[0], fPosZEM[1], fPosZEM[2]+fDimZEM[0], irot1, "ONLY");
+ // NB -> In AliZDCv2 ZEM is positioned in ALIC (instead of in ZDC) volume
+ // beacause it's impossible to make a ZDC pcon volume to contain
+ // both hadronics and EM calorimeters. (It causes many tracks abandoning).
+ gMC->Gspos("ZEM ", 1,"ALIC", fPosZEM[0], fPosZEM[1], fPosZEM[2]+fDimZEM[0], irot1, "ONLY");
+
+ // Second EM ZDC (same side w.r.t. IP, just on the other side w.r.t. beam pipe)
+ gMC->Gspos("ZEM ", 2,"ALIC", -fPosZEM[0], fPosZEM[1], fPosZEM[2]+fDimZEM[0], irot1, "ONLY");
// --- Adding last slice at the end of the EM calorimeter
// Float_t zLastSlice = fPosZEM[2]+fDimZEMPb+fDimZEM[0];
-// gMC->Gspos("ZEL2", 1,"ZDC ", fPosZEM[0], fPosZEM[1], zLastSlice, irot1, "ONLY");
+// gMC->Gspos("ZEL2", 1,"ALIC", fPosZEM[0], fPosZEM[1], zLastSlice, irot1, "ONLY");
}
// --- Tracking media parameters
Float_t epsil = .01, stmin=0.01, stemax = 1.;
- Int_t isxfld = gAlice->Field()->Integ();
+// Int_t isxfld = gAlice->Field()->Integ();
Float_t fieldm = 0., tmaxfd = 0.;
Int_t ifield = 0, isvolActive = 1, isvol = 0, inofld = 0;
ifield =2;
fieldm = 45.;
- AliMedium(11, "ZVOIM", 11, isvol, isxfld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(11, "ZVOIM", 11, isvol, ifield, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
// Thresholds for showering in the ZDCs
i = 1; //tantalum
fclose(fp7);
fclose(fp8);
}
-
-//_____________________________________________________________________________
-Int_t AliZDCv2::Digitize(Int_t Det, Int_t Quad, Int_t Light)
-{
- // Evaluation of the ADC channel corresponding to the light yield Light
-
- if(fDebug == 1){
- printf("\n Digitize -> Det = %d, Quad = %d, Light = %d\n", Det, Quad, Light);
- }
-
- // Parameters for conversion of light yield in ADC channels
- Float_t fPMGain[3][5]; // PM gain
- Float_t fADCRes; // ADC conversion factor
-
- Int_t j,i;
- for(i=0; i<3; i++){
- for(j=0; j<5; j++){
- fPMGain[i][j] = 100000.;
- }
- }
- fADCRes = 0.00000064; // ADC Resolution: 250 fC/ADCch
-
- Int_t ADCch = Int_t(Light*fPMGain[Det-1][Quad]*fADCRes);
-
- return ADCch;
-}
-
-
-//_____________________________________________________________________________
-void AliZDCv2::SDigits2Digits()
-{
- Hits2Digits(gAlice->GetNtrack());
-}
-
-//_____________________________________________________________________________
-void AliZDCv2::Hits2Digits(Int_t ntracks)
-{
- AliZDCDigit *newdigit;
- AliZDCHit *hit;
-
- Int_t PMCZN = 0, PMCZP = 0, PMQZN[4], PMQZP[4], PMZEM = 0;
-
- Int_t i;
- for(i=0; i<4; i++){
- PMQZN[i] =0;
- PMQZP[i] =0;
- }
-
- Int_t itrack = 0;
- for(itrack=0; itrack<ntracks; itrack++){
- gAlice->ResetHits();
- gAlice->TreeH()->GetEvent(itrack);
- for(i=0; i<fHits->GetEntries(); i++){
- hit = (AliZDCHit*)fHits->At(i);
- Int_t det = hit->GetVolume(0);
- Int_t quad = hit->GetVolume(1);
- Int_t lightQ = Int_t(hit->GetLightPMQ());
- Int_t lightC = Int_t(hit->GetLightPMC());
- if(fDebug == 1)
- printf(" \n itrack = %d, fNhits = %d, det = %d, quad = %d,"
- "lightC = %d lightQ = %d\n", itrack, fNhits, det, quad, lightC, lightQ);
-
- if(det == 1){ //ZN
- PMCZN = PMCZN + lightC;
- PMQZN[quad-1] = PMQZN[quad-1] + lightQ;
- }
-
- if(det == 2){ //ZP
- PMCZP = PMCZP + lightC;
- PMQZP[quad-1] = PMQZP[quad-1] + lightQ;
- }
-
- if(det == 3){ //ZEM
- PMZEM = PMZEM + lightC;
- }
- } // Hits loop
-
- } // Tracks loop
-
- if(fDebug == 1){
- printf("\n PMCZN = %d, PMQZN[0] = %d, PMQZN[1] = %d, PMQZN[2] = %d, PMQZN[3] = %d\n"
- , PMCZN, PMQZN[0], PMQZN[1], PMQZN[2], PMQZN[3]);
- printf("\n PMCZP = %d, PMQZP[0] = %d, PMQZP[1] = %d, PMQZP[2] = %d, PMQZP[3] = %d\n"
- , PMCZP, PMQZP[0], PMQZP[1], PMQZP[2], PMQZP[3]);
- printf("\n PMZEM = %d\n", PMZEM);
- }
-
- // ------------------------------------ Hits2Digits
- // Digits for ZN
- newdigit = new AliZDCDigit(1, 0, Digitize(1, 0, PMCZN));
- new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit);
- fNdigits++;
- delete newdigit;
-
- Int_t j;
- for(j=0; j<4; j++){
- newdigit = new AliZDCDigit(1, j+1, Digitize(1, j+1, PMQZN[j]));
- new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit);
- fNdigits++;
- delete newdigit;
- }
-
- // Digits for ZP
- newdigit = new AliZDCDigit(2, 0, Digitize(2, 0, PMCZP));
- new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit);
- fNdigits++;
- delete newdigit;
-
- Int_t k;
- for(k=0; k<4; k++){
- newdigit = new AliZDCDigit(2, k+1, Digitize(2, k+1, PMQZP[k]));
- new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit);
- fNdigits++;
- delete newdigit;
- }
-
- // Digits for ZEM
- newdigit = new AliZDCDigit(3, 0, Digitize(3, 0, PMZEM));
- new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit);
- fNdigits++;
- delete newdigit;
-
-
- gAlice->TreeD()->Fill();
- gAlice->TreeD()->Write(0,TObject::kOverwrite);
-
-// if(fDebug == 1){
-// printf("\n Event Digits -----------------------------------------------------\n");
-// fDigits->Print("");
-// }
-
-}
-//_____________________________________________________________________________
- void AliZDCv2::MakeBranch(Option_t *opt, char *file)
-{
- //
- // Create a new branch in the current Root Tree
- //
-
- AliDetector::MakeBranch(opt);
-
- Char_t branchname[10];
- sprintf(branchname,"%s",GetName());
- const char *cD = strstr(opt,"D");
-
- if (gAlice->TreeD() && cD) {
-
- // Creation of the digits from hits
-
- if(fDigits!=0) fDigits->Clear();
- else fDigits = new TClonesArray ("AliZDCDigit",1000);
- char branchname[10];
- sprintf(branchname,"%s",GetName());
- gAlice->MakeBranchInTree(gAlice->TreeD(),
- branchname, &fDigits, fBufferSize, file) ;
- printf("* AliZDCv2::MakeBranch * Making Branch %s for digits\n\n",branchname);
- }
-
-}
//_____________________________________________________________________________
void AliZDCv2::StepManager()
{
Int_t j, vol[2], ibeta=0, ialfa, ibe, nphe;
Float_t x[3], xdet[3], destep, hits[10], m, ekin, um[3], ud[3], be, radius, out;
+ Float_t xalic[3], z, GuiEff, GuiPar[4]={0.31,-0.0004,0.0197,0.7958};
TLorentzVector s, p;
const char *knamed;
if((gMC->GetMedium() == fMedSensZN) || (gMC->GetMedium() == fMedSensZP) ||
(gMC->GetMedium() == fMedSensGR) || (gMC->GetMedium() == fMedSensF1) ||
(gMC->GetMedium() == fMedSensF2) || (gMC->GetMedium() == fMedSensZEM)){
+
+// --- This part is for no shower developement in beam pipe and TDI
// (gMC->GetMedium() == fMedSensPI) || (gMC->GetMedium() == fMedSensTDI)){
// If particle interacts with beam pipe -> return
// printf("\n # of p lost in Inner Triplet = %d\n",fpLostIT);
// printf("\n # of p lost in D1 = %d\n",fpLostD1);
// printf("\n # of p lost in TDI = %d\n",fpLostTDI);
-// return;
// }
+// return;
// }
//Particle coordinates
// Determine in which ZDC the particle is
knamed = gMC->CurrentVolName();
- if(!strncmp(knamed,"ZN",2))vol[0]=1;
- if(!strncmp(knamed,"ZP",2))vol[0]=2;
- if(!strncmp(knamed,"ZE",2))vol[0]=3;
+ if(!strncmp(knamed,"ZN",2)){
+ vol[0]=1;
+ }
+ else if(!strncmp(knamed,"ZP",2)){
+ vol[0]=2;
+ }
+ else if(!strncmp(knamed,"ZE",2)){
+ vol[0]=3;
+ }
// Determine in which quadrant the particle is
-
- //Quadrant in ZN
- if(vol[0]==1){
+
+ if(vol[0]==1){ //Quadrant in ZN
+ // Calculating particle coordinates inside ZN
xdet[0] = x[0]-fPosZN[0];
xdet[1] = x[1]-fPosZN[1];
- if((xdet[0]<=0.) && (xdet[1]>=0.)) vol[1]=1;
- if((xdet[0]>0.) && (xdet[1]>0.)) vol[1]=2;
- if((xdet[0]<0.) && (xdet[1]<0.)) vol[1]=3;
- if((xdet[0]>0.) && (xdet[1]<0.)) vol[1]=4;
+ // Calculating quadrant in ZN
+ if(xdet[0]<=0.){
+ if(xdet[1]>=0.) vol[1]=1;
+ else if(xdet[1]<0.) vol[1]=3;
+ }
+ else if(xdet[0]>0.){
+ if(xdet[1]>=0.) vol[1]=2;
+ else if(xdet[1]<0.) vol[1]=4;
+ }
+ if((vol[1]!=1) && (vol[1]!=2) && (vol[1]!=3) && (vol[1]!=4))
+ printf("\n StepManager->ERROR in ZN!!! vol[1] = %d, xdet[0] = %f,"
+ "xdet[1] = %f\n",vol[1], xdet[0], xdet[1]);
}
- //Quadrant in ZP
- if(vol[0]==2){
+ else if(vol[0]==2){ //Quadrant in ZP
+ // Calculating particle coordinates inside ZP
xdet[0] = x[0]-fPosZP[0];
xdet[1] = x[1]-fPosZP[1];
- if(xdet[0]>fDimZP[0])xdet[0]=fDimZP[0]-0.01;
- if(xdet[0]<-fDimZP[0])xdet[0]=-fDimZP[0]+0.01;
- Float_t xqZP = xdet[0]/(fDimZP[0]/2);
+ if(xdet[0]>=fDimZP[0]) xdet[0]=fDimZP[0]-0.01;
+ if(xdet[0]<=-fDimZP[0]) xdet[0]=-fDimZP[0]+0.01;
+ // Calculating tower in ZP
+ Float_t xqZP = xdet[0]/(fDimZP[0]/2.);
for(int i=1; i<=4; i++){
if(xqZP>=(i-3) && xqZP<(i-2)){
vol[1] = i;
break;
}
}
+ if((vol[1]!=1) && (vol[1]!=2) && (vol[1]!=3) && (vol[1]!=4))
+ printf(" StepManager->ERROR in ZP!!! vol[1] = %d, xdet[0] = %f,"
+ "xdet[1] = %f",vol[1], xdet[0], xdet[1]);
}
- //ZEM has only 1 quadrant
- if(vol[0] == 3){
- vol[1] = 1;
- xdet[0] = x[0]-fPosZEM[0];
+ // Quadrant in ZEM: vol[1] = 1 -> particle in 1st ZEM (placed at x = 8.5 cm)
+ // vol[1] = 2 -> particle in 2nd ZEM (placed at x = -8.5 cm)
+ else if(vol[0] == 3){
+ if(x[0]>0.){
+ vol[1] = 1;
+ // Particle x-coordinate inside ZEM1
+ xdet[0] = x[0]-fPosZEM[0];
+ }
+ else{
+ vol[1] = 2;
+ // Particle x-coordinate inside ZEM2
+ xdet[0] = x[0]+fPosZEM[0];
+ }
xdet[1] = x[1]-fPosZEM[1];
}
if((destep=gMC->Edep())){
// Particle velocity
+ Float_t beta = 0.;
gMC->TrackMomentum(p);
Float_t ptot=TMath::Sqrt(p[0]*p[0]+p[1]*p[1]+p[2]*p[2]);
- Float_t beta = ptot/p[3];
- if(beta<0.67) return;
- if((beta>=0.67) && (beta<=0.75)) ibeta = 0;
- if((beta>0.75) && (beta<=0.85)) ibeta = 1;
- if((beta>0.85) && (beta<=0.95)) ibeta = 2;
- if(beta>0.95) ibeta = 3;
+ if(p[3] > 0.00001) beta = ptot/p[3];
+ else return;
+ if(beta<0.67){
+ return;
+ }
+ else if((beta>=0.67) && (beta<=0.75)){
+ ibeta = 0;
+ }
+ if((beta>0.75) && (beta<=0.85)){
+ ibeta = 1;
+ }
+ if((beta>0.85) && (beta<=0.95)){
+ ibeta = 2;
+ }
+ if(beta>0.95){
+ ibeta = 3;
+ }
// Angle between particle trajectory and fibre axis
// 1 -> Momentum directions
be = TMath::Abs(ud[0]);
}
- if((vol[0]==1)) radius = fFibZN[1];
- if((vol[0]==2)) radius = fFibZP[1];
+ if((vol[0]==1)){
+ radius = fFibZN[1];
+ }
+ else if((vol[0]==2)){
+ radius = fFibZP[1];
+ }
ibe = Int_t(be*1000.+1);
//Looking into the light tables
Float_t charge = gMC->TrackCharge();
- // (1) ZN
- if((vol[0]==1)) {
+ if((vol[0]==1)) { // (1) ZN fibres
if(ibe>fNben) ibe=fNben;
out = charge*charge*fTablen[ibeta][ialfa][ibe];
nphe = gRandom->Poisson(out);
AddHit(gAlice->CurrentTrack(), vol, hits);
}
}
-
- // (2) ZP
- if((vol[0]==2)) {
+ else if((vol[0]==2)) { // (2) ZP fibres
if(ibe>fNbep) ibe=fNbep;
out = charge*charge*fTablep[ibeta][ialfa][ibe];
nphe = gRandom->Poisson(out);
AddHit(gAlice->CurrentTrack(), vol, hits);
}
}
- // (3) ZEM
- if((vol[0]==3)) {
+ else if((vol[0]==3)) { // (3) ZEM fibres
if(ibe>fNbep) ibe=fNbep;
out = charge*charge*fTablep[ibeta][ialfa][ibe];
+ gMC->TrackPosition(s);
+ for(j=0; j<=2; j++){
+ xalic[j] = s[j];
+ }
+ // z-coordinate from ZEM front face
+ // NB-> fPosZEM[2]+fZEMLength = -1000.+2*10.3 = 979.69 cm
+ z = -xalic[2]+fPosZEM[2]+2*fZEMLength-xalic[1];
+// z = xalic[2]-fPosZEM[2]-fZEMLength-xalic[1]*(TMath::Tan(45.*kDegrad));
+// printf("\n fPosZEM[2]+2*fZEMLength = %f", fPosZEM[2]+2*fZEMLength);
+ GuiEff = GuiPar[0]*(GuiPar[1]*z*z+GuiPar[2]*z+GuiPar[3]);
+// printf("\n xalic[0] = %f xalic[1] = %f xalic[2] = %f z = %f \n",
+// xalic[0],xalic[1],xalic[2],z);
+ out = out*GuiEff;
nphe = gRandom->Poisson(out);
+// printf(" out*GuiEff = %f nphe = %d", out, nphe);
// printf("ZEM --- ibeta = %d, ialfa = %d, ibe = %d"
// " -> out = %f, nphe = %d\n", ibeta, ialfa, ibe, out, nphe);
- hits[7] = 0;
- hits[8] = nphe; //fLightPMC
- hits[9] = 0;
- AddHit(gAlice->CurrentTrack(), vol, hits);
+ if(vol[1] == 1){
+ hits[7] = 0;
+ hits[8] = nphe; //fLightPMC (ZEM1)
+ hits[9] = 0;
+ AddHit(gAlice->CurrentTrack(), vol, hits);
+ }
+ else{
+ hits[7] = nphe; //fLightPMQ (ZEM2)
+ hits[8] = 0;
+ hits[9] = 0;
+ AddHit(gAlice->CurrentTrack(), vol, hits);
+ }
}
}
}