#include "STRUCT/AliPIPEv0.h"
#include "ITS/AliITSvPPRasymmFMD.h"
#include "TPC/AliTPCv2.h"
-#include "TOF/AliTOFv4T0.h"
-#include "RICH/AliRICHv1.h"
+#include "TOF/AliTOFv5T0.h"
+#include "HMPID/AliHMPIDv1.h"
#include "ZDC/AliZDCv1.h"
#include "TRD/AliTRDv1.h"
#include "FMD/AliFMDv1.h"
#include "MUON/AliMUONv1.h"
#include "PHOS/AliPHOSv1.h"
#include "PMD/AliPMDv1.h"
-#include "START/AliSTARTv1.h"
-#include "EMCAL/AliEMCALv1.h"
-#include "CRT/AliCRTv1.h"
+#include "T0/AliT0v1.h"
+#include "EMCAL/AliEMCALv2.h"
+#include "ACORDE/AliACORDEv1.h"
#endif
void Config()
gSystem->Load("libgeant321");
#endif
- new TGeant3("C++ Interface to Geant3");
+ new TGeant3TGeo("C++ Interface to Geant3");
cout<<"Config.C: Creating Run Loader ..."<<endl;
- AliRunLoader* rl = AliRunLoader::Open("galice.root",AliConfig::fgkDefaultEventFolderName,
+ AliRunLoader* rl = AliRunLoader::Open("galice.root",AliConfig::GetDefaultEventFolderName(),
"recreate");
if (rl == 0x0)
{
rl->SetNumberOfEventsPerFile(6);
gAlice->SetRunLoader(rl);
+ // Set the trigger configuration
+ gAlice->SetTriggerDescriptor("Pb-Pb");
+ cout<<"Trigger configuration is set to Pb-Pb"<<endl;
+
//
// Set External decayer
AliDecayer *decayer = new AliDecayerPythia();
//Last number indicates the scale factor
Int_t iABSO = 1;
- Int_t iCRT = 0;
+ Int_t iACORDE = 0;
Int_t iDIPO = 1;
Int_t iFMD = 0;
Int_t iFRAME = 1;
Int_t iPHOS = 0;
Int_t iPIPE = 1;
Int_t iPMD = 0;
- Int_t iRICH = 0;
+ Int_t iHMPID = 0;
Int_t iSHIL = 1;
- Int_t iSTART = 0;
+ Int_t iT0 = 0;
Int_t iTOF = 0;
Int_t iTPC = 1;
Int_t iTRD = 0;
//
AliITSvPPRasymmFMD *ITS = new AliITSvPPRasymmFMD("ITS","New ITS PPR detailed version with asymmetric services");
ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
- ITS->SetReadDet(kTRUE); // don't touch this parameter if you're not an ITS developer
+ ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
// ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det"); // don't touch this parameter if you're not an ITS developer
ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
- ITS->SetThicknessChip1(200.); // chip thickness on layer 1 must be in the range [150,300]
- ITS->SetThicknessChip2(200.); // chip thickness on layer 2 must be in the range [150,300]
+ ITS->SetThicknessChip1(150.); // chip thickness on layer 1 must be in the range [150,300]
+ ITS->SetThicknessChip2(150.); // chip thickness on layer 2 must be in the range [150,300]
ITS->SetRails(1); // 1 --> rails in ; 0 --> rails out
ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
//
- //AliITSvPPRsymm *ITS = new AliITSvPPRsymm("ITS","New ITS PPR detailed version with symmetric services");
- //ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
- //ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
- //ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRsymm2.det"); // don't touch this parameter if you're not an ITS developer
- //ITS->SetThicknessDet1(300.); // detector thickness on layer 1 must be in the range [100,300]
- //ITS->SetThicknessDet2(300.); // detector thickness on layer 2 must be in the range [100,300]
- //ITS->SetThicknessChip1(300.); // chip thickness on layer 1 must be in the range [150,300]
- //ITS->SetThicknessChip2(300.); // chip thickness on layer 2 must be in the range [150,300]
- //ITS->SetRails(1); // 1 --> rails in ; 0 --> rails out
- //ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
- //
//
// Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful
// for reconstruction !):
if (iTPC)
{
- //============================ TPC parameters ================================
- // --- This allows the user to specify sectors for the SLOW (TPC geometry 2)
- // --- Simulator. SecAL (SecAU) <0 means that ALL lower (upper)
- // --- sectors are specified, any value other than that requires at least one
- // --- sector (lower or upper)to be specified!
- // --- Reminder: sectors 1-24 are lower sectors (1-12 -> z>0, 13-24 -> z<0)
- // --- sectors 25-72 are the upper ones (25-48 -> z>0, 49-72 -> z<0)
- // --- SecLows - number of lower sectors specified (up to 6)
- // --- SecUps - number of upper sectors specified (up to 12)
- // --- Sens - sensitive strips for the Slow Simulator !!!
- // --- This does NOT work if all S or L-sectors are specified, i.e.
- // --- if SecAL or SecAU < 0
- //
- //
- //-----------------------------------------------------------------------------
-
- // gROOT->LoadMacro("SetTPCParam.C");
- // AliTPCParam *param = SetTPCParam();
+ //============================ TPC parameters ===================
AliTPC *TPC = new AliTPCv2("TPC", "Default");
-
- // All sectors included
- TPC->SetSecAL(-1);
- TPC->SetSecAU(-1);
-
}
if (iTOF)
{
//=================== TOF parameters ============================
- AliTOF *TOF = new AliTOFv4T0("TOF", "normal TOF");
+ AliTOF *TOF = new AliTOFv5T0("TOF", "normal TOF");
}
- if (iRICH)
+ if (iHMPID)
{
- //=================== RICH parameters ===========================
- AliRICH *RICH = new AliRICHv1("RICH", "normal RICH");
+ //=================== HMPID parameters ===========================
+ AliHMPID *HMPID = new AliHMPIDv1("HMPID", "normal HMPID");
}
AliZDC *ZDC = new AliZDCv1("ZDC", "normal ZDC");
}
- if (iCRT)
+ if (iACORDE)
{
- //=================== CRT parameters ============================
+ //=================== ACORDE parameters ============================
- AliCRT *CRT = new AliCRTv1("CRT", "normal CRT");
+ AliACORDE *ACORDE = new AliACORDEv1("ACORDE", "normal ACORDE");
}
if (iTRD)
//=================== TRD parameters ============================
AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
-
- // Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2)
- TRD->SetGasMix(1);
-
- // With hole in front of PHOS
- TRD->SetPHOShole();
- // With hole in front of RICH
- TRD->SetRICHhole();
- // Switch on TR
- AliTRDsim *TRDsim = TRD->CreateTR();
}
if (iFMD)
PMD->SetPadSize(0.8, 1.0, 1.0, 1.5);
}
- if (iEMCAL && !iRICH)
+ if (iEMCAL && !iHMPID)
{
//=================== EMCAL parameters ============================
- AliEMCAL *EMCAL = new AliEMCALv1("EMCAL", "EMCALArch1a");
+ AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "SHISH_77_TRD1_2X2_FINAL_110DEG");
}
- if (iSTART)
+ if (iT0)
{
- //=================== START parameters ============================
- AliSTART *START = new AliSTARTv1("START", "START Detector");
+ //=================== T0 parameters ============================
+ AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff