-void Config()
+enum PprRun_t
{
- //
- // Set Random Number seed
- gRandom->SetSeed(12345);
-
- // ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
- new AliGeant3("C++ Interface to Geant3");
-
- //=======================================================================
- // Create the output file
-
- TFile *rootfile = new TFile("galice.root","recreate");
- rootfile->SetCompressionLevel(2);
- TGeant3 *geant3 = (TGeant3*)gMC;
-
- //
- // Set External decayer
- AliDecayer* decayer = new AliDecayerPythia();
- decayer->SetForceDecay(all);
- decayer->Init();
- gMC->SetExternalDecayer(decayer);
-
- //
- //
- //=======================================================================
- // ******* GEANT STEERING parameters FOR ALICE SIMULATION *******
- geant3->SetTRIG(1); //Number of events to be processed
- geant3->SetSWIT(4,10);
- geant3->SetDEBU(0,0,1);
- //geant3->SetSWIT(2,2);
- geant3->SetDCAY(1);
- geant3->SetPAIR(1);
- geant3->SetCOMP(1);
- geant3->SetPHOT(1);
- geant3->SetPFIS(0);
- geant3->SetDRAY(0);
- geant3->SetANNI(1);
- geant3->SetBREM(1);
- geant3->SetMUNU(1);
- geant3->SetCKOV(1);
- geant3->SetHADR(1); //Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3)
- geant3->SetLOSS(2);
- geant3->SetMULS(1);
- geant3->SetRAYL(1);
- geant3->SetAUTO(1); //Select automatic STMIN etc... calc. (AUTO 1) or manual (AUTO 0)
- geant3->SetABAN(0); //Restore 3.16 behaviour for abandoned tracks
- geant3->SetOPTI(2); //Select optimisation level for GEANT geometry searches (0,1,2)
- geant3->SetERAN(5.e-7);
-
- Float_t cut = 1.e-3; // 1MeV cut by default
- Float_t tofmax = 1.e10;
- // GAM ELEC NHAD CHAD MUON EBREM MUHAB EDEL MUDEL MUPA TOFMAX
- geant3->SetCUTS(cut,cut, cut, cut, cut, cut, cut, cut, cut, cut, tofmax);
- //
- //=======================================================================
- // ************* STEERING parameters FOR ALICE SIMULATION **************
- // --- Specify event type to be tracked through the ALICE setup
- // --- All positions are in cm, angles in degrees, and P and E in GeV
- AliGenHIJINGpara *gener = new AliGenHIJINGpara(84210);
- gener->SetMomentumRange(0,999);
- gener->SetPhiRange(0,360);
- // gener->SetThetaRange(0.28,179.72);
- gener->SetThetaRange(0.,180.);
- gener->SetOrigin(0,0,0); //vertex position
- gener->SetSigma(0,0,0); //Sigma in (X,Y,Z) (cm) on IP position
- gener->Init();
- //
- // Activate this line if you want the vertex smearing to happen
- // track by track
- //
- //gener->SetVertexSmear(perTrack);
-
- gAlice->SetField(-999,2); //Specify maximum magnetic field in Tesla (neg. ==> default field)
-
- Int_t iABSO=1;
- Int_t iCASTOR=1;
- Int_t iDIPO=1;
- Int_t iFMD=1;
- Int_t iFRAME=1;
- Int_t iHALL=1;
- Int_t iITS=1;
- Int_t iMAG=1;
- Int_t iMUON=1;
- Int_t iPHOS=1;
- Int_t iPIPE=1;
- Int_t iPMD=1;
- Int_t iRICH=1;
- Int_t iSHIL=1;
- Int_t iSTART=1;
- Int_t iTOF=1;
- Int_t iTPC=1;
- Int_t iTRD=1;
- Int_t iZDC=1;
-
- //=================== Alice BODY parameters =============================
- AliBODY *BODY = new AliBODY("BODY","Alice envelop");
-
- if(iMAG) {
- //=================== MAG parameters ============================
- // --- Start with Magnet since detector layouts may be depending ---
- // --- on the selected Magnet dimensions ---
- AliMAG *MAG = new AliMAG("MAG","Magnet");
- }
-
-
- if(iABSO) {
- //=================== ABSO parameters ============================
- AliABSO *ABSO = new AliABSOv0("ABSO","Muon Absorber");
- }
-
- if(iDIPO) {
- //=================== DIPO parameters ============================
-
- AliDIPO *DIPO = new AliDIPOv2("DIPO","Dipole version 2");
- }
-
- if(iHALL) {
- //=================== HALL parameters ============================
-
- AliHALL *HALL = new AliHALL("HALL","Alice Hall");
- }
-
-
- if(iFRAME) {
- //=================== FRAME parameters ============================
-
- AliFRAME *FRAME = new AliFRAMEv1("FRAME","Space Frame");
-
- }
-
- if(iSHIL) {
- //=================== SHIL parameters ============================
-
- AliSHIL *SHIL = new AliSHILv0("SHIL","Shielding");
- }
-
-
- if(iPIPE) {
- //=================== PIPE parameters ============================
-
- AliPIPE *PIPE = new AliPIPEv0("PIPE","Beam Pipe");
- }
-
-
- if(iITS) {
- //=================== ITS parameters ============================
- //
- // As the innermost detector in ALICE, the Inner Tracking System "impacts" on
- // almost all other detectors. This involves the fact that the ITS geometry
- // still has several options to be followed in parallel in order to determine
- // the best set-up which minimizes the induced background. All the geometries
- // available to date are described in the following. Read carefully the comments
- // and use the default version (the only one uncommented) unless you are making
- // comparisons and you know what you are doing. In this case just uncomment the
- // ITS geometry you want to use and run Aliroot.
- //
- // Detailed geometries:
- // ====================
- //
- //
- //AliITS *ITS = new AliITSv3("ITS","Old ITS detailed version as of the ALICE TP");
- //
- //AliITS *ITS = new AliITSv5("ITS","Current ITS detailed version used for the ITS TDR");
- //
- //AliITS *ITS = new AliITSv5symm("ITS","Updated ITS TDR detailed version with symmetric services");
- //
- AliITS *ITS = new AliITSv5asymm("ITS","Updates ITS TDR detailed version with asymmetric services");
- //
- //
- // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful for reconstruction !):
- // ======================================================================================================================
- //
- //
- //AliITS *ITS = new AliITSv1("ITS","Old ITS coarse version as of the ALICE TP");
- //
- //AliITS *ITS = new AliITSvPPRcoarseasymm("ITS","New ITS coarse version with asymmetric services");
- //
- //AliITS *ITS = new AliITSvPPRcoarsesymm("ITS","New ITS coarse version with symmetric services");
- //
- //
- // Geant3 <-> EUCLID conversion
- // ============================
- //
- // SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and
- // media to two ASCII files (called by default ITSgeometry.euc and
- // ITSgeometry.tme) in a format understandable to the CAD system EUCLID.
- // The default (=0) means that you dont want to use this facility.
- //
- ITS->SetEUCLID(0);
- }
-
-
-
- if(iTPC) {
- //============================ TPC parameters ================================
- // --- This allows the user to specify sectors for the SLOW (TPC geometry 2)
- // --- Simulator. SecAL (SecAU) <0 means that ALL lower (upper)
- // --- sectors are specified, any value other than that requires at least one
- // --- sector (lower or upper)to be specified!
- // --- Reminder: sectors 1-24 are lower sectors (1-12 -> z>0, 13-24 -> z<0)
- // --- sectors 25-72 are the upper ones (25-48 -> z>0, 49-72 -> z<0)
- // --- SecLows - number of lower sectors specified (up to 6)
- // --- SecUps - number of upper sectors specified (up to 12)
- // --- Sens - sensitive strips for the Slow Simulator !!!
- // --- This does NOT work if all S or L-sectors are specified, i.e.
- // --- if SecAL or SecAU < 0
- //
- //
- //-----------------------------------------------------------------------------
-
- // gROOT->LoadMacro("SetTPCParam.C");
- // AliTPCParam *param = SetTPCParam();
- AliTPC *TPC = new AliTPCv2("TPC","Default");
- // All sectors included
- TPC->SetSecAL(-1);
- TPC->SetSecAU(-1);
-
- }
-
-
- if(iTOF) {
- //=================== TOF parameters ============================
- AliTOF *TOF = new AliTOFv2("TOF","normal TOF");
- }
-
- if(iRICH) {
- //=================== RICH parameters ===========================
- AliRICH *RICH = new AliRICHv1("RICH","normal RICH");
-
- }
-
+ test50,
+ kParam_8000, kParam_4000, kParam_2000,
+ kHijing_cent1, kHijing_cent2,
+ kHijing_per1, kHijing_per2, kHijing_per3, kHijing_per4, kHijing_per5,
+ kHijing_jj25, kHijing_jj50, kHijing_jj75, kHijing_jj100, kHijing_jj200,
+ kHijing_gj25, kHijing_gj50, kHijing_gj75, kHijing_gj100, kHijing_gj200
+};
+
+enum PprGeo_t
+{
+ kHoles, kNoHoles
+};
- if(iZDC) {
- //=================== ZDC parameters ============================
+enum PprRad_t
+{
+ kGluonRadiation, kNoGluonRadiation
+};
- AliZDC *ZDC = new AliZDCv1("ZDC","normal ZDC");
- }
+enum PprMag_t
+{
+ k2kG, k4kG, k5kG
+};
- if(iCASTOR) {
- //=================== CASTOR parameters ============================
- AliCASTOR *CASTOR = new AliCASTORv1("CASTOR","normal CASTOR");
- }
+// This part for configuration
+static PprRun_t run = test50;
+static PprGeo_t geo = kHoles;
+static PprRad_t rad = kGluonRadiation;
+static PprMag_t mag = k4kG;
- if(iTRD) {
- //=================== TRD parameters ============================
-
- AliTRD *TRD = new AliTRDv1("TRD","TRD slow simulator");
-
- // Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2)
- TRD->SetGasMix(1);
-
- // With hole in front of PHOS
- TRD->SetPHOShole();
- // With hole in front of RICH
- TRD->SetRICHhole();
- // Switch on TR
- AliTRDsim *TRDsim = TRD->CreateTR();
- }
+// Comment line
+static TString comment;
- if(iFMD) {
- //=================== FMD parameters ============================
- AliFMD *FMD = new AliFMDv1("FMD","normal FMD");
- }
- if(iMUON) {
- //=================== MUON parameters ===========================
+void Config()
+{
- AliMUON *MUON = new AliMUONv1("MUON","normal MUON");
- MUON->SetIshunt(0);
- MUON->SetMaxStepGas(0.1);
- MUON->SetMaxStepAlu(0.1);
- //
- // Version 0
- //
- // First define the number of planes that are segmented (1 or 2) by a call
- // to SetNsec.
- // Then chose for each chamber (chamber plane) the segmentation
- // and response model.
- // They should be equal for the two chambers of each station. In a future
- // version this will be enforced.
- //
- //
- Int_t chamber;
- Int_t station;
- // Default response
- AliMUONResponseV0* response0 = new AliMUONResponseV0;
- response0->SetSqrtKx3(0.7131);
- response0->SetKx2(1.0107);
- response0->SetKx4(0.4036);
- response0->SetSqrtKy3(0.7642);
- response0->SetKy2(0.9706);
- response0->SetKy4(0.3831);
- response0->SetPitch(0.25);
- response0->SetSigmaIntegration(10.);
- response0->SetChargeSlope(50);
- response0->SetChargeSpread(0.18, 0.18);
- response0->SetMaxAdc(4096);
- response0->SetZeroSuppression(6);
- //--------------------------------------------------------
- // Configuration for Chamber TC1/2 (Station 1) ----------
- //^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- Float_t rseg1[4]={17.5, 55.2, 71.3, 95.5};
- Int_t nseg1[4]={4, 4, 2, 1};
- //
- chamber=1;
- //^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
- //
- AliMUONSegmentationV01 *seg11=new AliMUONSegmentationV01;
-
- seg11->SetSegRadii(rseg1);
- seg11->SetPadSize(3, 0.5);
- seg11->SetDAnod(3.0/3./4);
- seg11->SetPadDivision(nseg1);
+ // 7-DEC-2000 09:00
+ // Switch on Transition adiation simulation. 6/12/00 18:00
+ // iZDC=1 7/12/00 09:00
+ // ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
+ // Theta range given through pseudorapidity limits 22/6/2001
+
+ // Set Random Number seed
+ // gRandom->SetSeed(12345);
+
+ new TGeant3("C++ Interface to Geant3");
+
+ if (!gSystem->Getenv("CONFIG_FILE"))
+ {
+ TFile *rootfile = new TFile("galice.root", "recreate");
+
+ rootfile->SetCompressionLevel(2);
+ }
+
+ TGeant3 *geant3 = (TGeant3 *) gMC;
+
+ //
+ // Set External decayer
+ AliDecayer *decayer = new AliDecayerPythia();
+
+ decayer->SetForceDecay(kAll);
+ decayer->Init();
+ gMC->SetExternalDecayer(decayer);
+ //
+ //
+ //=======================================================================
+ // ******* GEANT STEERING parameters FOR ALICE SIMULATION *******
+ geant3->SetTRIG(1); //Number of events to be processed
+ geant3->SetSWIT(4, 10);
+ geant3->SetDEBU(0, 0, 1);
+ //geant3->SetSWIT(2,2);
+ geant3->SetDCAY(1);
+ geant3->SetPAIR(1);
+ geant3->SetCOMP(1);
+ geant3->SetPHOT(1);
+ geant3->SetPFIS(0);
+ geant3->SetDRAY(0);
+ geant3->SetANNI(1);
+ geant3->SetBREM(1);
+ geant3->SetMUNU(1);
+ geant3->SetCKOV(1);
+ geant3->SetHADR(1); //Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3)
+ geant3->SetLOSS(2);
+ geant3->SetMULS(1);
+ geant3->SetRAYL(1);
+ geant3->SetAUTO(1); //Select automatic STMIN etc... calc. (AUTO 1) or manual (AUTO 0)
+ geant3->SetABAN(0); //Restore 3.16 behaviour for abandoned tracks
+ geant3->SetOPTI(2); //Select optimisation level for GEANT geometry searches (0,1,2)
+ geant3->SetERAN(5.e-7);
+
+ Float_t cut = 1.e-3; // 1MeV cut by default
+ Float_t tofmax = 1.e10;
+
+ // GAM ELEC NHAD CHAD MUON EBREM MUHAB EDEL MUDEL MUPA TOFMAX
+ geant3->SetCUTS(cut, cut, cut, cut, cut, cut, cut, cut, cut, cut,
+ tofmax);
+ //
+ //=======================================================================
+ // ************* STEERING parameters FOR ALICE SIMULATION **************
+ // --- Specify event type to be tracked through the ALICE setup
+ // --- All positions are in cm, angles in degrees, and P and E in GeV
+
+
+// Generator Configuration
+ gAlice->SetDebug(1);
+ AliGenerator* gener = GeneratorFactory(run);
+ gener->SetOrigin(0, 0, 0); // vertex position
+ gener->SetSigma(0, 0, 5.3); // Sigma in (X,Y,Z) (cm) on IP position
+ gener->SetCutVertexZ(1.); // Truncate at 1 sigma
+ gener->SetVertexSmear(kPerEvent);
+ gener->SetTrackingFlag(1);
+ gener->Init();
+
+ if (mag == k2kG) {
+ comment = comment.Append(" | L3 field 0.2 T");
+ } else if (mag == k4kG) {
+ comment = comment.Append(" | L3 field 0.4 T");
+ } else if (mag == k5kG) {
+ comment = comment.Append(" | L3 field 0.5 T");
+ }
+
+
+ if (rad == kGluonRadiation)
+ {
+ comment = comment.Append(" | Gluon Radiation On");
+
+ } else {
+ comment = comment.Append(" | Gluon Radiation Off");
+ }
+
+ if (geo == kHoles)
+ {
+ comment = comment.Append(" | Holes for PHOS/RICH");
+
+ } else {
+ comment = comment.Append(" | No holes for PHOS/RICH");
+ }
+
+ printf("\n \n Comment: %s \n \n", (char*) comment);
+
+
+// Field (L3 0.4 T)
+ AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 1., 10., mag);
+ rootfile->cd();
+ gAlice->SetField(field);
+
+//
+ Int_t iABSO = 1;
+ Int_t iDIPO = 1;
+ Int_t iFMD = 1;
+ Int_t iFRAME = 1;
+ Int_t iHALL = 1;
+ Int_t iITS = 1;
+ Int_t iMAG = 1;
+ Int_t iMUON = 1;
+ Int_t iPHOS = 1;
+ Int_t iPIPE = 1;
+ Int_t iPMD = 1;
+ Int_t iRICH = 1;
+ Int_t iSHIL = 1;
+ Int_t iSTART = 1;
+ Int_t iTOF = 1;
+ Int_t iTPC = 1;
+ Int_t iTRD = 1;
+ Int_t iZDC = 1;
+ Int_t iEMCAL = 1;
+ Int_t iVZERO = 1;
+ Int_t iCRT = 0;
+
+ //=================== Alice BODY parameters =============================
+ AliBODY *BODY = new AliBODY("BODY", "Alice envelop");
+
+
+ if (iMAG)
+ {
+ //=================== MAG parameters ============================
+ // --- Start with Magnet since detector layouts may be depending ---
+ // --- on the selected Magnet dimensions ---
+ AliMAG *MAG = new AliMAG("MAG", "Magnet");
+ }
+
+
+ if (iABSO)
+ {
+ //=================== ABSO parameters ============================
+ AliABSO *ABSO = new AliABSOv0("ABSO", "Muon Absorber");
+ }
+
+ if (iDIPO)
+ {
+ //=================== DIPO parameters ============================
+
+ AliDIPO *DIPO = new AliDIPOv2("DIPO", "Dipole version 2");
+ }
+
+ if (iHALL)
+ {
+ //=================== HALL parameters ============================
+
+ AliHALL *HALL = new AliHALL("HALL", "Alice Hall");
+ }
+
+
+ if (iFRAME)
+ {
+ //=================== FRAME parameters ============================
+
+ AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
+ if (geo == kHoles) {
+ FRAME->SetHoles(1);
+ } else {
+ FRAME->SetHoles(0);
+ }
+ }
+
+ if (iSHIL)
+ {
+ //=================== SHIL parameters ============================
+
+ AliSHIL *SHIL = new AliSHILv2("SHIL", "Shielding Version 2");
+ }
+
+
+ if (iPIPE)
+ {
+ //=================== PIPE parameters ============================
+
+ AliPIPE *PIPE = new AliPIPEv0("PIPE", "Beam Pipe");
+ }
- MUON->SetSegmentationModel(chamber-1, 1, seg11);
- //
- AliMUONSegmentationV02 *seg12=new AliMUONSegmentationV02;
- seg12->SetSegRadii(rseg1);
- seg12->SetPadSize(0.75, 2.0);
- seg12->SetDAnod(3.0/3./4);
- seg12->SetPadDivision(nseg1);
-
- MUON->SetSegmentationModel(chamber-1, 2, seg12);
+ if(iITS) {
- MUON->SetResponseModel(chamber-1, response0);
-
- chamber=2;
- //^^^^^^^^^
+ //=================== ITS parameters ============================
//
- MUON->SetNsec(chamber-1,2);
+ // As the innermost detector in ALICE, the Inner Tracking System "impacts" on
+ // almost all other detectors. This involves the fact that the ITS geometry
+ // still has several options to be followed in parallel in order to determine
+ // the best set-up which minimizes the induced background. All the geometries
+ // available to date are described in the following. Read carefully the comments
+ // and use the default version (the only one uncommented) unless you are making
+ // comparisons and you know what you are doing. In this case just uncomment the
+ // ITS geometry you want to use and run Aliroot.
//
- AliMUONSegmentationV01 *seg21=new AliMUONSegmentationV01;
- seg21->SetSegRadii(rseg1);
- seg21->SetPadSize(3, 0.5);
- seg21->SetDAnod(3.0/3./4);
- seg21->SetPadDivision(nseg1);
- MUON->SetSegmentationModel(chamber-1, 1, seg21);
+ // Detailed geometries:
//
- AliMUONSegmentationV02 *seg22=new AliMUONSegmentationV02;
- seg22->SetSegRadii(rseg1);
- seg22->SetPadSize(0.75, 2.);
- seg22->SetDAnod(3.0/3./4);
- seg22->SetPadDivision(nseg1);
- MUON->SetSegmentationModel(chamber-1, 2, seg22);
-
- MUON->SetResponseModel(chamber-1, response0);
//
- //--------------------------------------------------------
- // Configuration for Chamber TC3/4 -----------------------
- ///^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- // Float_t rseg2[4]={23.5, 87.7, 122.4, 122.5};
- Float_t rseg2[4]={23.5, 47.1, 87.7, 122.5};
- Int_t nseg2[4]={4, 4, 2, 1};
+ //AliITS *ITS = new AliITSv5symm("ITS","Updated ITS TDR detailed version with symmetric services");
//
- chamber=3;
- //^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
+ //AliITS *ITS = new AliITSv5asymm("ITS","Updates ITS TDR detailed version with asymmetric services");
+ //
+ AliITSvPPRasymm *ITS = new AliITSvPPRasymm("ITS","New ITS PPR detailed version with asymmetric services");
+ ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
+ ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
+ // ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det"); // don't touch this parameter if you're not an ITS developer
+ ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
+ ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
+ ITS->SetThicknessChip1(200.); // chip thickness on layer 1 must be in the range [150,300]
+ ITS->SetThicknessChip2(200.); // chip thickness on layer 2 must be in the range [150,300]
+ ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
+ ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
+ //
+ //AliITSvPPRsymm *ITS = new AliITSvPPRsymm("ITS","New ITS PPR detailed version with symmetric services");
+ //ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
+ //ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
+ //ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRsymm2.det"); // don't touch this parameter if you're not an ITS developer
+ //ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
+ //ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
+ //ITS->SetThicknessChip1(200.); // chip thickness on layer 1 must be in the range [150,300]
+ //ITS->SetThicknessChip2(200.); // chip thickness on layer 2 must be in the range [150,300]
+ //ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
+ //ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
+ //
+ //
+ // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful
+ // for reconstruction !):
+ //
+ //
+ //AliITSvPPRcoarseasymm *ITS = new AliITSvPPRcoarseasymm("ITS","New ITS PPR coarse version with asymmetric services");
+ //ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
+ //ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
+ //
+ //AliITS *ITS = new AliITSvPPRcoarsesymm("ITS","New ITS PPR coarse version with symmetric services");
+ //ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
+ //ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
+ //
//
- AliMUONSegmentationV01 *seg31=new AliMUONSegmentationV01;
- seg31->SetSegRadii(rseg2);
- seg31->SetPadSize(6, 0.5);
- seg31->SetDAnod(3.0/3./4);
- seg31->SetPadDivision(nseg2);
- MUON->SetSegmentationModel(chamber-1, 1, seg31);
//
- AliMUONSegmentationV02 *seg32=new AliMUONSegmentationV02;
- seg32->SetSegRadii(rseg2);
- seg32->SetPadSize(0.75, 4.);
- seg32->SetPadDivision(nseg2);
- seg32->SetDAnod(3.0/3./4);
-
- MUON->SetSegmentationModel(chamber-1, 2, seg32);
-
- MUON->SetResponseModel(chamber-1, response0);
-
- chamber=4;
- //^^^^^^^^^
- //
- MUON->SetNsec(chamber-1,2);
+ // Geant3 <-> EUCLID conversion
+ // ============================
//
- AliMUONSegmentationV01 *seg41=new AliMUONSegmentationV01;
- seg41->SetSegRadii(rseg2);
- seg41->SetPadSize(6, 0.5);
- seg41->SetDAnod(3.0/3./4);
- seg41->SetPadDivision(nseg2);
- MUON->SetSegmentationModel(chamber-1, 1, seg41);
+ // SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and
+ // media to two ASCII files (called by default ITSgeometry.euc and
+ // ITSgeometry.tme) in a format understandable to the CAD system EUCLID.
+ // The default (=0) means that you dont want to use this facility.
//
- AliMUONSegmentationV02 *seg42=new AliMUONSegmentationV02;
- seg42->SetSegRadii(rseg2);
- seg42->SetPadSize(0.75, 4.);
- seg42->SetPadDivision(nseg2);
- seg42->SetDAnod(3.0/3./4);
-
- MUON->SetSegmentationModel(chamber-1, 2, seg42);
-
- MUON->SetResponseModel(chamber-1, response0);
-
-
- //--------------------------------------------------------
- // Configuration for Chamber TC5/6 -----------------------
- //^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
- seg5 = new AliMUONSegmentationV1;
- AliMUONResponseV0* response5 = new AliMUONResponseV0;
- // K3 = 0.62
- response5->SetSqrtKx3(0.78740079);
- response5->SetKx2(0.95237319); // 0.5 * kPI * (1- 0.5*sqrtky3 )
- response5->SetKx4(0.37480633); // 0.25/TMath::ATan(sqrtkx3)
- // K3 = 0.55
- response5->SetSqrtKy3(0.74161985);
- response5->SetKy2(0.98832946);
- response5->SetKy4(0.39177817);
- response5->SetPitch(0.325);
- response5->SetSigmaIntegration(10.);
- response5->SetChargeSlope(50);
- response5->SetChargeSpread(0.4, 0.4);
- response5->SetMaxAdc(4096);
- response5->SetZeroSuppression(6);
+ ITS->SetEUCLID(0);
+ }
+
+ if (iTPC)
+ {
+ //============================ TPC parameters ================================
+ // --- This allows the user to specify sectors for the SLOW (TPC geometry 2)
+ // --- Simulator. SecAL (SecAU) <0 means that ALL lower (upper)
+ // --- sectors are specified, any value other than that requires at least one
+ // --- sector (lower or upper)to be specified!
+ // --- Reminder: sectors 1-24 are lower sectors (1-12 -> z>0, 13-24 -> z<0)
+ // --- sectors 25-72 are the upper ones (25-48 -> z>0, 49-72 -> z<0)
+ // --- SecLows - number of lower sectors specified (up to 6)
+ // --- SecUps - number of upper sectors specified (up to 12)
+ // --- Sens - sensitive strips for the Slow Simulator !!!
+ // --- This does NOT work if all S or L-sectors are specified, i.e.
+ // --- if SecAL or SecAU < 0
+ //
+ //
+ //-----------------------------------------------------------------------------
+
+ // gROOT->LoadMacro("SetTPCParam.C");
+ // AliTPCParam *param = SetTPCParam();
+ AliTPC *TPC = new AliTPCv2("TPC", "Default");
+
+ // All sectors included
+ TPC->SetSecAL(-1);
+ TPC->SetSecAU(-1);
+
+ }
+
+
+ if (iTOF) {
+ if (geo == kHoles) {
+ //=================== TOF parameters ============================
+ AliTOF *TOF = new AliTOFv2FHoles("TOF", "TOF with Holes");
+ } else {
+ AliTOF *TOF = new AliTOFv4T0("TOF", "normal TOF");
+ }
+ }
+
+
+ if (iRICH)
+ {
+ //=================== RICH parameters ===========================
+ AliRICH *RICH = new AliRICHv3("RICH", "normal RICH");
+
+ }
+
+
+ if (iZDC)
+ {
+ //=================== ZDC parameters ============================
+
+ AliZDC *ZDC = new AliZDCv2("ZDC", "normal ZDC");
+ }
+
+ if (iTRD)
+ {
+ //=================== TRD parameters ============================
+
+ AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
+
+ // Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2)
+ TRD->SetGasMix(1);
+ if (geo == kHoles) {
+ // With hole in front of PHOS
+ TRD->SetPHOShole();
+ // With hole in front of RICH
+ TRD->SetRICHhole();
+ }
+ // Switch on TR
+ AliTRDsim *TRDsim = TRD->CreateTR();
+ }
+
+ if (iFMD)
+ {
+ //=================== FMD parameters ============================
+ AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
+ FMD->SetRingsSi1(256);
+ FMD->SetRingsSi2(128);
+ FMD->SetSectorsSi1(20);
+ FMD->SetSectorsSi2(40);
+ }
+
+ if (iMUON)
+ {
+ //=================== MUON parameters ===========================
+
+ AliMUON *MUON = new AliMUONv1("MUON", "default");
+ }
+ //=================== PHOS parameters ===========================
+
+ if (iPHOS)
+ {
+ AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
+ }
+
+
+ if (iPMD)
+ {
+ //=================== PMD parameters ============================
+ AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
+ }
+
+ if (iSTART)
+ {
+ //=================== START parameters ============================
+ AliSTART *START = new AliSTARTv1("START", "START Detector");
+ }
+
+ if (iEMCAL)
+ {
+ //=================== EMCAL parameters ============================
+ AliEMCAL *EMCAL = new AliEMCALv1("EMCAL", "EMCALArch1a");
+ }
+
+ if (iCRT)
+ {
+ //=================== CRT parameters ============================
+ AliCRT *CRT = new AliCRTv0("CRT", "normal ACORDE");
+ }
+
+ if (iVZERO)
+ {
+ //=================== CRT parameters ============================
+ AliVZERO *VZERO = new AliVZEROv2("VZERO", "normal VZERO");
+ }
+
+}
- chamber=5;
- MUON->SetNsec(chamber-1,1);
- MUON->SetSegmentationModel(chamber-1, 1, seg5);
- MUON->SetResponseModel(chamber-1, response5);
-
- chamber=6;
- MUON->SetNsec(chamber-1,1);
- MUON->SetSegmentationModel(chamber-1, 1, seg5);
- MUON->SetResponseModel(chamber-1, response5);
- //
- // Station 3
- station=3;
- MUON->SetPadSize(station, 1, 0.975, 0.55);
-
- //--------------------------------------------------------
- // Configuration for Chamber TC7/8 (Station 4) ----------
- //^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
- Int_t nseg4[4]={4, 4, 2, 1};
-
- chamber=7;
- //^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
- //
- AliMUONSegmentationV04 *seg71=new AliMUONSegmentationV04;
- seg71->SetPadSize(10.,0.5);
- seg71->SetDAnod(0.25);
- seg71->SetPadDivision(nseg4);
- MUON->SetSegmentationModel(chamber-1, 1, seg71);
- AliMUONSegmentationV05 *seg72=new AliMUONSegmentationV05;
- seg72->SetPadSize(1,10);
- seg72->SetDAnod(0.25);
- seg72->SetPadDivision(nseg4);
- MUON->SetSegmentationModel(chamber-1, 2, seg72);
-
- MUON->SetResponseModel(chamber-1, response0);
-
- chamber=8;
- //^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
- AliMUONSegmentationV04 *seg81=new AliMUONSegmentationV04;
- seg81->SetPadSize(10., 0.5);
- seg81->SetPadDivision(nseg4);
- seg81->SetDAnod(0.25);
- MUON->SetSegmentationModel(chamber-1, 1, seg81);
-
- AliMUONSegmentationV05 *seg82=new AliMUONSegmentationV05;
- seg82->SetPadSize(1, 10);
- seg82->SetPadDivision(nseg4);
- seg82->SetDAnod(0.25);
- MUON->SetSegmentationModel(chamber-1, 2, seg82);
-
- MUON->SetResponseModel(chamber-1, response0);
- //--------------------------------------------------------
- // Configuration for Chamber TC9/10 (Station 5) ---------
- //^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- chamber=9;
- //^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
- //
- AliMUONSegmentationV04 *seg91=new AliMUONSegmentationV04;
- seg91->SetPadSize(10.,0.5);
- seg91->SetDAnod(0.25);
- seg91->SetPadDivision(nseg4);
- MUON->SetSegmentationModel(chamber-1, 1, seg91);
-
- AliMUONSegmentationV05 *seg92=new AliMUONSegmentationV05;
- seg92->SetPadSize(1,10);
- seg92->SetDAnod(0.25);
- seg92->SetPadDivision(nseg4);
-
- MUON->SetSegmentationModel(chamber-1, 2, seg92);
-
- MUON->SetResponseModel(chamber-1, response0);
-
- chamber=10;
- //^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
- AliMUONSegmentationV04 *seg101=new AliMUONSegmentationV04;
- seg101->SetPadSize(10., 0.5);
- seg101->SetPadDivision(nseg4);
- seg101->SetDAnod(0.25);
- MUON->SetSegmentationModel(chamber-1, 1, seg101);
-
- AliMUONSegmentationV05 *seg102=new AliMUONSegmentationV05;
- seg102->SetPadSize(1,10);
- seg102->SetPadDivision(nseg4);
- seg102->SetDAnod(0.25);
- MUON->SetSegmentationModel(chamber-1, 2, seg102);
-
- MUON->SetResponseModel(chamber-1, response0);
-
- //--------------------------------------------------------
- // Configuration for Trigger staions ---------------------
- //^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- AliMUONResponseTrigger* responseTrigger0 = new AliMUONResponseTrigger;
-
- chamber=11;
- MUON->SetNsec(chamber-1,2);
- AliMUONSegmentationTriggerX *seg111=new AliMUONSegmentationTriggerX;
- MUON->SetSegmentationModel(chamber-1, 1, seg111);
- AliMUONSegmentationTriggerY *seg112=new AliMUONSegmentationTriggerY;
- MUON->SetSegmentationModel(chamber-1, 2, seg112);
-
- MUON->SetResponseModel(chamber-1, responseTrigger0);
-
- chamber=12;
- MUON->SetNsec(chamber-1,2);
- AliMUONSegmentationTriggerX *seg121=new AliMUONSegmentationTriggerX;
- MUON->SetSegmentationModel(chamber-1, 1, seg121);
- AliMUONSegmentationTriggerY *seg122=new AliMUONSegmentationTriggerY;
- MUON->SetSegmentationModel(chamber-1, 2, seg122);
-
- MUON->SetResponseModel(chamber-1, responseTrigger0);
-
- chamber=13;
- MUON->SetNsec(chamber-1,2);
- AliMUONSegmentationTriggerX *seg131=new AliMUONSegmentationTriggerX;
- MUON->SetSegmentationModel(chamber-1, 1, seg131);
- AliMUONSegmentationTriggerY *seg132=new AliMUONSegmentationTriggerY;
- MUON->SetSegmentationModel(chamber-1, 2, seg132);
- MUON->SetResponseModel(chamber-1, responseTrigger0);
-
- chamber=14;
- MUON->SetNsec(chamber-1,2);
- AliMUONSegmentationTriggerX *seg141=new AliMUONSegmentationTriggerX;
- MUON->SetSegmentationModel(chamber-1, 1, seg141);
- AliMUONSegmentationTriggerY *seg142=new AliMUONSegmentationTriggerY;
- MUON->SetSegmentationModel(chamber-1, 2, seg142);
-
- MUON->SetResponseModel(chamber-1, responseTrigger0);
- }
-
- //=================== PHOS parameters ===========================
+Float_t EtaToTheta(Float_t arg){
+ return (180./TMath::Pi())*2.*atan(exp(-arg));
+}
- if(iPHOS) {
- AliPHOS *PHOS = new AliPHOSv1("PHOS","GPS2");
- }
- if(iPMD) {
- //=================== PMD parameters ============================
+AliGenerator* GeneratorFactory(PprRun_t run) {
+ Int_t isw = 3;
+ if (rad == kNoGluonRadiation) isw = 0;
+
+
+ switch (run) {
+ case test50:
+ comment = comment.Append(":HIJINGparam test 50 particles");
+ AliGenHIJINGpara *gener = new AliGenHIJINGpara(50);
+ gener->SetMomentumRange(0, 999999.);
+ gener->SetPhiRange(-180., 180.);
+ // Set pseudorapidity range from -8 to 8.
+ Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
+ Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
+ gener->SetThetaRange(thmin,thmax);
+ break;
+ case kParam_8000:
+ comment = comment.Append(":HIJINGparam N=8000");
+ AliGenHIJINGpara *gener = new AliGenHIJINGpara(86030);
+ gener->SetMomentumRange(0, 999999.);
+ gener->SetPhiRange(-180., 180.);
+ // Set pseudorapidity range from -8 to 8.
+ Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
+ Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
+ gener->SetThetaRange(thmin,thmax);
+ break;
+ case kParam_4000:
+ comment = comment.Append("HIJINGparam N=4000");
+ AliGenHIJINGpara *gener = new AliGenHIJINGpara(43015);
+ gener->SetMomentumRange(0, 999999.);
+ gener->SetPhiRange(-180., 180.);
+ // Set pseudorapidity range from -8 to 8.
+ Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
+ Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
+ gener->SetThetaRange(thmin,thmax);
+ break;
+ case kParam_2000:
+ comment = comment.Append("HIJINGparam N=2000");
+ AliGenHIJINGpara *gener = new AliGenHIJINGpara(21507);
+ gener->SetMomentumRange(0, 999999.);
+ gener->SetPhiRange(-180., 180.);
+ // Set pseudorapidity range from -8 to 8.
+ Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
+ Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
+ gener->SetThetaRange(thmin,thmax);
+ break;
+//
+// Hijing Central
+//
+ case kHijing_cent1:
+ comment = comment.Append("HIJING cent1");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ break;
+ case kHijing_cent2:
+ comment = comment.Append("HIJING cent2");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 2.);
+ break;
+//
+// Hijing Peripheral
+//
+ case kHijing_per1:
+ comment = comment.Append("HIJING per1");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(5., 8.6);
+ break;
+ case kHijing_per2:
+ comment = comment.Append("HIJING per2");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(8.6, 11.2);
+ break;
+ case kHijing_per3:
+ comment = comment.Append("HIJING per3");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(11.2, 13.2);
+ break;
+ case kHijing_per4:
+ comment = comment.Append("HIJING per4");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(13.2, 15.);
+ break;
+ case kHijing_per5:
+ comment = comment.Append("HIJING per5");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(15., 100.);
+ break;
+//
+// Jet-Jet
+//
+ case kHijing_jj25:
+ comment = comment.Append("HIJING Jet 25 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(1);
+ gener->SetPtJet(25.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.3,0.3);
+ gener->SetJetPhiRange(75., 165.);
+ break;
+
+ case kHijing_jj50:
+ comment = comment.Append("HIJING Jet 50 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(1);
+ gener->SetPtJet(50.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.3,0.3);
+ gener->SetJetPhiRange(75., 165.);
+ break;
+
+ case kHijing_jj75:
+ comment = comment.Append("HIJING Jet 75 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(1);
+ gener->SetPtJet(75.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.3,0.3);
+ gener->SetJetPhiRange(75., 165.);
+ break;
+
+ case kHijing_jj100:
+ comment = comment.Append("HIJING Jet 100 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(1);
+ gener->SetPtJet(100.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.3,0.3);
+ gener->SetJetPhiRange(75., 165.);
+ break;
+
+ case kHijing_jj200:
+ comment = comment.Append("HIJING Jet 200 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(1);
+ gener->SetPtJet(200.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.3,0.3);
+ gener->SetJetPhiRange(75., 165.);
+ break;
+//
+// Gamma-Jet
+//
+ case kHijing_gj25:
+ comment = comment.Append("HIJING Gamma 25 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(2);
+ gener->SetPtJet(25.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.12, 0.12);
+ gener->SetJetPhiRange(220., 320.);
+ break;
+
+ case kHijing_gj50:
+ comment = comment.Append("HIJING Gamma 50 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(2);
+ gener->SetPtJet(50.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.12, 0.12);
+ gener->SetJetPhiRange(220., 320.);
+ break;
+
+ case kHijing_gj75:
+ comment = comment.Append("HIJING Gamma 75 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(2);
+ gener->SetPtJet(75.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.12, 0.12);
+ gener->SetJetPhiRange(220., 320.);
+ break;
+
+ case kHijing_gj100:
+ comment = comment.Append("HIJING Gamma 100 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(2);
+ gener->SetPtJet(100.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.12, 0.12);
+ gener->SetJetPhiRange(220., 320.);
+ break;
+
+ case kHijing_gj200:
+ comment = comment.Append("HIJING Gamma 200 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(2);
+ gener->SetPtJet(200.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.12, 0.12);
+ gener->SetJetPhiRange(220., 320.);
+ break;
+ }
+ return gener;
+}
- AliPMD *PMD = new AliPMDv1("PMD","normal PMD");
- PMD->SetPAR(1., 1., 0.8, 0.02);
- PMD->SetIN(6., 18., -580., 27., 27.);
- PMD->SetGEO(0.0, 0.2, 4.);
- PMD->SetPadSize(0.8, 1.0, 1.0, 1.5);
+AliGenHijing* HijingStandard()
+{
+ AliGenHijing *gener = new AliGenHijing(-1);
+// centre of mass energy
+ gener->SetEnergyCMS(5500.);
+// reference frame
+ gener->SetReferenceFrame("CMS");
+// projectile
+ gener->SetProjectile("A", 208, 82);
+ gener->SetTarget ("A", 208, 82);
+// tell hijing to keep the full parent child chain
+ gener->KeepFullEvent();
+// enable jet quenching
+ gener->SetJetQuenching(4);
+// enable shadowing
+ gener->SetShadowing(1);
+// neutral pion and heavy particle decays switched off
+ gener->SetDecaysOff(1);
+// Don't track spectators
+ gener->SetSpectators(0);
+// kinematic selection
+ gener->SetSelectAll(0);
+ return gener;
+}
- }
- if(iSTART) {
- //=================== START parameters ============================
- AliSTART *START = new AliSTARTv1("START","START Detector");
- }
-
-}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff