#include "STRUCT/AliFRAMEv2.h"
#include "STRUCT/AliSHILv3.h"
#include "STRUCT/AliPIPEv3.h"
-#include "ITS/AliITSvPPRasymmFMD.h"
+#include "ITS/AliITSv11Hybrid.h"
#include "TPC/AliTPCv2.h"
#include "TOF/AliTOFv6T0.h"
-#include "HMPID/AliHMPIDv1.h"
-#include "ZDC/AliZDCv2.h"
+#include "HMPID/AliHMPIDv3.h"
+#include "ZDC/AliZDCv3.h"
#include "TRD/AliTRDv1.h"
#include "FMD/AliFMDv1.h"
#include "MUON/AliMUONv1.h"
"p-p","Pb-Pb"
};
+enum PprGeo_t
+ {
+ kHoles, kNoHoles
+ };
+
// This part for configuration
//static PprRun_t srun = test50;
-static PprRun_t srun = kHIJINGplus;
-static PprRad_t srad = kGluonRadiation;
-static PprMag_t smag = k5kG;
+static PprRun_t srun = kHIJINGplus;
+static PprRad_t srad = kGluonRadiation;
+static PprMag_t smag = k5kG;
+static PprGeo_t geo = kHoles;
static Int_t sseed = 12345; //Set 0 to use the current time
//static PprTrigConf_t strig = kDefaultPPTrig; // default pp trigger configuration
static PprTrigConf_t strig = kDefaultPbPbTrig; // default PbPb trigger configuration
AliGenHijing* HijingStandard();
AliGenGeVSim* GeVSimStandard(Float_t, Float_t);
void ProcessEnvironmentVars();
+void LoadPythia();
void Config()
{
gRandom->SetSeed(sseed);
cout<<"Seed for random number generation= "<<gRandom->GetSeed()<<endl;
-
- // libraries required by geant321
+ // Load Pythia libraries
+ LoadPythia();
+
+ // libraries required by geant321
#if defined(__CINT__)
gSystem->Load("libgeant321");
#endif
new TGeant3TGeo("C++ Interface to Geant3");
+ if(!AliCDBManager::Instance()->IsDefaultStorageSet()){
+ AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT");
+ AliCDBManager::Instance()->SetRun(0);
+ }
+
AliRunLoader* rl=0x0;
AliLog::Message(AliLog::kInfo, "Creating Run Loader", "", "", "Config()"," ConfigPPR.C", __LINE__);
rl->SetCompressionLevel(2);
rl->SetNumberOfEventsPerFile(3);
gAlice->SetRunLoader(rl);
+ // gAlice->SetGeometryFromFile("geometry.root");
+ // gAlice->SetGeometryFromCDB();
// Set the trigger configuration
gAlice->SetTriggerDescriptor(pprTrigConfName[strig]);
//=================== FRAME parameters ============================
AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
+ if (geo == kHoles) {
+ FRAME->SetHoles(1);
+ } else {
+ FRAME->SetHoles(0);
+ }
}
if (iSHIL)
AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
}
- if(iITS) {
+ if (iITS)
+ {
+ //=================== ITS parameters ============================
- //=================== ITS parameters ============================
- //
- // As the innermost detector in ALICE, the Inner Tracking System "impacts" on
- // almost all other detectors. This involves the fact that the ITS geometry
- // still has several options to be followed in parallel in order to determine
- // the best set-up which minimizes the induced background. All the geometries
- // available to date are described in the following. Read carefully the comments
- // and use the default version (the only one uncommented) unless you are making
- // comparisons and you know what you are doing. In this case just uncomment the
- // ITS geometry you want to use and run Aliroot.
- //
- // Detailed geometries:
- //
- //
- //AliITS *ITS = new AliITSv5symm("ITS","Updated ITS TDR detailed version with symmetric services");
- //
- //AliITS *ITS = new AliITSv5asymm("ITS","Updates ITS TDR detailed version with asymmetric services");
- //
- AliITSvPPRasymmFMD *ITS = new AliITSvPPRasymmFMD("ITS","New ITS PPR detailed version with asymmetric services");
- ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
- ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
- // ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det"); // don't touch this parameter if you're not an ITS developer
- ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
- ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
- ITS->SetThicknessChip1(150.); // chip thickness on layer 1 must be in the range [150,300]
- ITS->SetThicknessChip2(150.); // chip thickness on layer 2 must be in the range [150,300]
- ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
- ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
-
- // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful
- // for reconstruction !):
- //
- //
- //AliITSvPPRcoarseasymm *ITS = new AliITSvPPRcoarseasymm("ITS","New ITS PPR coarse version with asymmetric services");
- //ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
- //ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
- //
- //AliITS *ITS = new AliITSvPPRcoarsesymm("ITS","New ITS PPR coarse version with symmetric services");
- //ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
- //ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
- //
- //
- //
- // Geant3 <-> EUCLID conversion
- // ============================
- //
- // SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and
- // media to two ASCII files (called by default ITSgeometry.euc and
- // ITSgeometry.tme) in a format understandable to the CAD system EUCLID.
- // The default (=0) means that you dont want to use this facility.
- //
- ITS->SetEUCLID(0);
+ AliITS *ITS = new AliITSv11Hybrid("ITS","ITS v11Hybrid");
}
if (iTPC)
if (iHMPID)
{
//=================== HMPID parameters ===========================
- AliHMPID *HMPID = new AliHMPIDv1("HMPID", "normal HMPID");
+ AliHMPID *HMPID = new AliHMPIDv3("HMPID", "normal HMPID");
}
{
//=================== ZDC parameters ============================
- AliZDC *ZDC = new AliZDCv2("ZDC", "normal ZDC");
+ AliZDC *ZDC = new AliZDCv3("ZDC", "normal ZDC");
}
if (iTRD)
sseed = atoi(gSystem->Getenv("CONFIG_SEED"));
}
}
+
+
+void LoadPythia()
+{
+ // Load Pythia related libraries
+ gSystem->Load("liblhapdf.so"); // Parton density functions
+ gSystem->Load("libEGPythia6.so"); // TGenerator interface
+ gSystem->Load("libpythia6.so"); // Pythia
+ gSystem->Load("libAliPythia6.so"); // ALICE specific implementations
+}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff