]> git.uio.no Git - u/mrichter/AliRoot.git/blame - ANALYSIS/AliAnalysisDataContainer.cxx
Adding the AliAnalysisGUI class which is the main class that controls the GUI.
[u/mrichter/AliRoot.git] / ANALYSIS / AliAnalysisDataContainer.cxx
CommitLineData
d3106602 1/**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
3 * *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
6 * *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
15
16/* $Id$ */
17// Author: Andrei Gheata, 31/05/2006
18
19//==============================================================================
20// AliAnalysysDataContainer - Container of data of arbitrary type deriving
21// from TObject used for analysis. A container must be connected to the
22// output data slot of a single analysis task (producer) , but also as
23// input slot for possibly several other tasks (consumers). The connected
24// slots must enforce the same data type as the container (or a derived type).
25// A container becomes the owner of the contained data once this was produced.
26//
27// Containers should be defined by the analysis module using:
28//
29// AliAnalysisModule::AddContainer(const char *name, TClass *type);
30//
31// A container should be connected to a producer:
32
33// AliAnalysisModule::ConnectOutput(AliAnalysisTask *task,
34// AliAnalysisDataContainer *cont)
35// and to its consumers:
36//
37// AliAnalysisModule::ConnectInput(AliAnalysisTask *task, Int_t islot,
38// AliAnalysisDataContainer *cont)
39//
40// The container will create an implicit connection between the producer task
41// and all consumers, which will become sub-tasks of the producer.
42//
43//==============================================================================
44
45#include "TClass.h"
46#include "TTree.h"
47#include "TFile.h"
48#include "AliLog.h"
49
50#include "AliAnalysisDataContainer.h"
51#include "AliAnalysisDataSlot.h"
52#include "AliAnalysisTask.h"
53
54ClassImp(AliAnalysisDataContainer)
55
56//______________________________________________________________________________
37a26056 57AliAnalysisDataContainer::AliAnalysisDataContainer() : TNamed(),
58 fDataReady(kFALSE),
59 fOwnedData(kFALSE),
60 fFileName(),
61 fData(NULL),
62 fType(NULL),
63 fProducer(NULL),
64 fConsumers(NULL)
d3106602 65{
66// Default ctor.
d3106602 67}
37a26056 68
d3106602 69//______________________________________________________________________________
70AliAnalysisDataContainer::AliAnalysisDataContainer(const char *name, TClass *type)
37a26056 71 :TNamed(name,""),
72 fDataReady(kFALSE),
73 fOwnedData(kTRUE),
74 fFileName(),
75 fData(NULL),
76 fType(type),
77 fProducer(NULL),
78 fConsumers(NULL)
d3106602 79{
80// Normal constructor.
37a26056 81}
82
83//______________________________________________________________________________
84AliAnalysisDataContainer::AliAnalysisDataContainer(const AliAnalysisDataContainer &cont)
85 :TNamed(cont),
86 fDataReady(cont.fDataReady),
87 fOwnedData(kFALSE),
88 fFileName(cont.fFileName),
89 fData(cont.fData),
90 fType(cont.fType),
91 fProducer(cont.fProducer),
92 fConsumers(NULL)
93{
94// Copy ctor.
95 if (cont.fConsumers) {
96 fConsumers = new TObjArray(2);
97 Int_t ncons = cont.fConsumers->GetEntriesFast();
98 for (Int_t i=0; i<ncons; i++) fConsumers->Add(cont.fConsumers->At(i));
99 }
d3106602 100}
101
102//______________________________________________________________________________
103AliAnalysisDataContainer::~AliAnalysisDataContainer()
104{
105// Destructor. Deletes data ! (What happens if data is a container ???)
106 if (fData && fOwnedData) delete fData;
107 if (fConsumers) delete fConsumers;
108}
109
37a26056 110//______________________________________________________________________________
111AliAnalysisDataContainer &AliAnalysisDataContainer::operator=(const AliAnalysisDataContainer &cont)
112{
113// Assignment.
114 if (&cont != this) {
115 TNamed::operator=(cont);
116 fDataReady = cont.fDataReady;
117 fOwnedData = kFALSE; // !!! Data owned by cont.
118 fFileName = cont.fFileName;
119 fData = cont.fData;
120 fType = cont.fType;
121 fProducer = cont.fProducer;
122 if (cont.fConsumers) {
123 fConsumers = new TObjArray(2);
124 Int_t ncons = cont.fConsumers->GetEntriesFast();
125 for (Int_t i=0; i<ncons; i++) fConsumers->Add(cont.fConsumers->At(i));
126 }
127 }
128 return *this;
129}
130
d3106602 131//______________________________________________________________________________
132Bool_t AliAnalysisDataContainer::SetData(TObject *data, Option_t *option)
133{
134// Set the data as READY only if it was published by the producer.
135// If option is not empty the data will be saved in the file fFileName and option
136// describes the method to opent the file: NEW/CREATE, RECREATE, UPDATE
137 // If there is no producer declared, this is a top level container.
138 AliAnalysisTask *task;
139 Int_t i, nc;
140 if (!fProducer) {
141 fData = data;
142 fDataReady = kTRUE;
143 if (fConsumers) {
144 nc = fConsumers->GetEntriesFast();
145 for (i=0; i<nc; i++) {
146 task = (AliAnalysisTask*)fConsumers->At(i);
147 task->CheckNotify();
148 }
149 }
150 return kTRUE;
151 }
152 // Check if it is the producer who published the data
153 if (fProducer->GetPublishedData()==data) {
154 fData = data;
155 fDataReady = kTRUE;
156 if (strlen(option)) {
157 if (!fFileName.Length()) {
158 AliWarning(Form("Cannot write data since file name for container %s was not set", GetName()));
159 return kFALSE;
160 }
161 TFile *f = new TFile(fFileName.Data(), option);
162 if (!f->IsZombie()) {
163 fData->Write();
164 f->Write();
165 }
166 }
167 if (fConsumers) {
168 nc = fConsumers->GetEntriesFast();
169 for (i=0; i<nc; i++) {
170 task = (AliAnalysisTask*)fConsumers->At(i);
171 task->CheckNotify();
172 }
173 }
174 return kTRUE;
175 } else {
176 AliWarning(Form("Data for container %s can be published only by producer task %s",
177 GetName(), fProducer->GetName()));
178 return kFALSE;
179 }
180}
181
182//______________________________________________________________________________
183void AliAnalysisDataContainer::SetFileName(const char *name)
184{
185// Data will be written to this file if it is set using SetData(data, option)
186// Option represent the way the file is accessed: NEW, APPEND, ...
187 fFileName = name;
188}
189
190//______________________________________________________________________________
191void AliAnalysisDataContainer::GetEntry(Long64_t ientry)
192{
193// If data is ready and derives from TTree or from TBranch, this will get the
194// requested entry in memory if not already loaded.
195 if (!fDataReady) return;
196 Bool_t is_tree = fType->InheritsFrom(TTree::Class());
197 if (is_tree) {
198 TTree *tree = (TTree*)fData;
199 if (tree->GetReadEntry() != ientry) tree->GetEntry(ientry);
200 return;
201 }
202 Bool_t is_branch = fType->InheritsFrom(TBranch::Class());
203 if (is_branch) {
204 TBranch *branch = (TBranch*)fData;
205 if (branch->GetReadEntry() != ientry) branch->GetEntry(ientry);
206 return;
207 }
208}
209
210//______________________________________________________________________________
211void AliAnalysisDataContainer::SetProducer(AliAnalysisTask *prod, Int_t islot)
212{
213// Set the producer of data. The slot number is required for data type checking.
214 if (fProducer) {
215 AliWarning(Form("Data container %s already has a producer: %s",
216 GetName(),fProducer->GetName()));
217 }
218 if (fDataReady) {
219 AliError(Form("%s container contains data - cannot change producer!", GetName()));
220 return;
221 }
222 AliAnalysisDataSlot *slot = prod->GetOutputSlot(islot);
223 if (!slot) {
224 AliError(Form("Producer task %s does not have an output #%i", prod->GetName(),islot));
225 return;
226 }
227 if (!slot->GetType()->InheritsFrom(fType)) {
228 AliError(Form("Data type %s for output slot %i of task %s does not match container type %s",
229 slot->GetType()->GetName(),islot,prod->GetName(),fType->GetName()));
230 return;
231 }
232
233 fProducer = prod;
234 // Add all consumers as daughter tasks
235 TIter next(fConsumers);
236 AliAnalysisTask *cons;
237 while ((cons=(AliAnalysisTask*)next())) {
238 if (!prod->GetListOfTasks()->FindObject(cons)) prod->Add(cons);
239 }
240}
241
242//______________________________________________________________________________
243void AliAnalysisDataContainer::AddConsumer(AliAnalysisTask *consumer, Int_t islot)
244{
245// Add a consumer for contained data;
246 AliAnalysisDataSlot *slot = consumer->GetInputSlot(islot);
247 if (!slot) {
248 AliError(Form("Consumer task %s does not have an input #%i", consumer->GetName(),islot));
249 return;
250 }
251 if (!slot->GetType()->InheritsFrom(fType)) {
252 AliError(Form("Data type %s for input slot %i of task %s does not match container type %s",
253 slot->GetType()->GetName(),islot,consumer->GetName(),fType->GetName()));
254 return;
255 }
256
257 if (!fConsumers) fConsumers = new TObjArray(2);
258 fConsumers->Add(consumer);
259 // Add the consumer task to the list of task of the producer
260 if (fProducer && !fProducer->GetListOfTasks()->FindObject(consumer))
261 fProducer->Add(consumer);
262}
263
264//______________________________________________________________________________
265Bool_t AliAnalysisDataContainer::ClientsExecuted() const
266{
267// Check if all client tasks have executed.
268 TIter next(fConsumers);
269 AliAnalysisTask *task;
270 while ((task=(AliAnalysisTask*)next())) {
271 if (!task->HasExecuted()) return kFALSE;
272 }
273 return kTRUE;
274}
275
276//______________________________________________________________________________
277void AliAnalysisDataContainer::DeleteData()
278{
279// Delete data if not needed anymore.
280 if (!fDataReady || !ClientsExecuted()) {
281 AliWarning(Form("Data not ready or not all clients of container %s executed. Data not deleted.", GetName()));
282 return;
283 }
284 if (!fOwnedData) {
285 AliWarning(Form("Data not owned by container %s. Not deleted.", GetName()));
286 return;
287 }
288 delete fData;
289 fData = 0;
290 fDataReady = kFALSE;
291}
292
293//______________________________________________________________________________
294void AliAnalysisDataContainer::PrintContainer(Option_t *option, Int_t indent) const
295{
296// Print info about this container.
297 TString ind;
298 for (Int_t i=0; i<indent; i++) ind += " ";
299 TString opt(option);
300 opt.ToLower();
301 Bool_t dep = (opt.Contains("dep"))?kTRUE:kFALSE;
302 if (!dep) {
303 printf("%s\n", Form("%sContainer: %s type: %s", ind.Data(), GetName(), fType->GetName()));
304 if (fProducer)
305 printf("%s\n", Form("%s = Data producer: task %s",ind.Data(),fProducer->GetName()));
306 else
307 printf("%s\n", Form("%s= No data producer"));
308 printf("%s", Form("%s = Consumer tasks: "));
309 if (!fConsumers || !fConsumers->GetEntriesFast()) printf("-none-\n");
310 else printf("\n");
311 }
312 TIter next(fConsumers);
313 AliAnalysisTask *task;
314 while ((task=(AliAnalysisTask*)next())) task->PrintTask(option, indent+3);
315}