[u/mrichter/AliRoot.git] / ITS / oldmacros / Config_muon.C

#include <TPDGCode.h>

void Config(){
    // 7-DEC-2000 09:00
    // Switch on Transition Radiation simulation. 6/12/00 18:00  
    // iZDC=1  7/12/00 09:00
    // ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
    // Theta range given through pseudorapidity limits 22/6/2001

    // Set Random Number seed
    // gRandom->SetSeed(12345);

    // libraries required by geant321
    gSystem->Load("libgeant321");

    new     TGeant3("C++ Interface to Geant3");

    if (!gSystem->Getenv("CONFIG_FILE"))
    {
        TFile  *rootfile = new TFile("galice.root", "recreate");

        rootfile->SetCompressionLevel(2);
    }

    TGeant3 *geant3 = (TGeant3 *) gMC;

    //
    // Set External decayer
    AliDecayer *decayer = new AliDecayerPythia();

    decayer->SetForceDecay(kAll);
    decayer->Init();
    gMC->SetExternalDecayer(decayer);
    //
    //
    //=======================================================================
    // ******* GEANT STEERING parameters FOR ALICE SIMULATION *******
    geant3->SetTRIG(1);         //Number of events to be processed 
    geant3->SetSWIT(4, 10);
    geant3->SetDEBU(0, 0, 1);
    //geant3->SetSWIT(2,2);
    geant3->SetDCAY(1);
    geant3->SetPAIR(1);
    geant3->SetCOMP(1);
    geant3->SetPHOT(1);
    geant3->SetPFIS(0);
    geant3->SetDRAY(0);
    geant3->SetANNI(1);
    geant3->SetBREM(1);
    geant3->SetMUNU(1);
    geant3->SetCKOV(1);
    geant3->SetHADR(1);         //Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3)
    geant3->SetLOSS(2);
    geant3->SetMULS(1);
    geant3->SetRAYL(1);
    geant3->SetAUTO(1);         //Select automatic STMIN etc... calc. (AUTO 1) or manual (AUTO 0)
    geant3->SetABAN(0);         //Restore 3.16 behaviour for abandoned tracks
    geant3->SetOPTI(2);         //Select optimisation level for GEANT geometry searches (0,1,2)
    geant3->SetERAN(5.e-7);

    Float_t cut = 1.e-3;        // 1MeV cut by default
    Float_t tofmax = 1.e10;

    //             GAM ELEC NHAD CHAD MUON EBREM MUHAB EDEL MUDEL MUPA TOFMAX
    geant3->SetCUTS(cut, cut, cut, cut, cut, cut, cut, cut, cut, cut,
                    tofmax);
    //
    //=======================================================================
    // ************* STEERING parameters FOR ALICE SIMULATION **************
    // --- Specify event type to be tracked through the ALICE setup
    // --- All positions are in cm, angles in degrees, and P and E in GeV
    if (gSystem->Getenv("CONFIG_NPARTICLES")){
        int     nParticles = atoi(gSystem->Getenv("CONFIG_NPARTICLES"));
    }else{
        int     nParticles = 2;
    } // end if
//*********************************************
// Example for Fixed Particle Gun
//*********************************************
     AliGenFixed *gener = new AliGenFixed(nParticles);
     gener->SetMomentum(50);
     gener->SetPhi(180.);
     gener->SetTheta(95.);
     gener->SetOrigin(0,0,0);          //vertex position
     gener->SetPart(kMuonMinus);
    gener->Init();
    // 
    // Activate this line if you want the vertex smearing to happen
    // track by track
    //
    //gener->SetVertexSmear(perTrack); 

    gAlice->SetField(-999, 2);  //Specify maximum magnetic field in Tesla (neg. ==> default field)

    Int_t   iABSO  = 1;
    Int_t   iDIPO  = 1;
    Int_t   iFMD   = 1;
    Int_t   iFRAME = 1;
    Int_t   iHALL  = 1;
    Int_t   iITS   = 1;
    Int_t   iMAG   = 1;
    Int_t   iMUON  = 1;
    Int_t   iPHOS  = 1;
    Int_t   iPIPE  = 1;
    Int_t   iPMD   = 1;
    Int_t   iRICH  = 1;
    Int_t   iSHIL  = 1;
    Int_t   iT0 = 1;
    Int_t   iTOF   = 1;
    Int_t   iTPC   = 1;
    Int_t   iTRD   = 1;
    Int_t   iZDC   = 1;
    Int_t   iEMCAL = 1;

    //=================== Alice BODY parameters =============================
    AliBODY *BODY = new AliBODY("BODY", "Alice envelop");

    if (iMAG){
        //=================== MAG parameters ============================
        // --- Start with Magnet since detector layouts may be depending ---
        // --- on the selected Magnet dimensions ---
        AliMAG *MAG = new AliMAG("MAG", "Magnet");
    }
    if (iABSO){
        //=================== ABSO parameters ============================
        AliABSO *ABSO = new AliABSOv0("ABSO", "Muon Absorber");
    }
    if (iDIPO){
        //=================== DIPO parameters ============================
        AliDIPO *DIPO = new AliDIPOv2("DIPO", "Dipole version 2");
    }
    if (iHALL){
        //=================== HALL parameters ============================
        AliHALL *HALL = new AliHALL("HALL", "Alice Hall");
    }
    if (iFRAME){
        //=================== FRAME parameters ============================
        AliFRAME *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
    }
    if (iSHIL){
        //=================== SHIL parameters ============================
        AliSHIL *SHIL = new AliSHILvF("SHIL", "Shielding");
    }
    if (iPIPE){
        //=================== PIPE parameters ============================
        AliPIPE *PIPE = new AliPIPEv0("PIPE", "Beam Pipe");
    }
    if(iITS) {
	//=================== ITS parameters ============================
	//
	// As the innermost detector in ALICE, the Inner Tracking System 
	// "impacts" on almost all other detectors. This involves the fact
	// that the ITS geometry still has several options to be followed
	//in parallel in order to determine the best set-up which minimizes
	// the induced background. All the geometries available to date are
	// described in the following. Read carefully the comments and use
	// the default version (the only one uncommented) unless you are making
	// comparisons and you know what you are doing. In this case just
	// uncomment the ITS geometry you want to use and run Aliroot.
	// Detailed geometries:
	AliITSvPPRasymm *ITS  = new AliITSvPPRasymm("ITS","New ITS PPR detailed version with asymmetric services");
	ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
	ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
	ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
	ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
	ITS->SetThicknessChip1(200.); // chip thickness on layer 1 must be in the range [150,300]
	ITS->SetThicknessChip2(200.);// chip thickness on layer 2 must be in the range [150,300]
	ITS->SetRails(1);	     // 1 --> rails in ; 0 --> rails out
	ITS->SetCoolingFluid(1);   // 1 --> water ; 0 --> freon
	// Geant3 <-> EUCLID conversion
	// ============================
	// SetEUCLID is a flag to output (=1) or not to output (=0) both
	// geometry and media to two ASCII files (called by default
	// ITSgeometry.euc and ITSgeometry.tme) in a format understandable
	// to the CAD system EUCLID.  The default (=0) means that you dont
	// want to use this facility.
	ITS->SetEUCLID(0);  
    }
    if (iTPC){
        //============================ TPC parameters =========================
        // This allows the user to specify sectors for the SLOW (TPC geometry
	// 2) Simulator. SecAL (SecAU) <0 means that ALL lower (upper)
        // sectors are specified, any value other than that requires at least
	// one sector (lower or upper)to be specified!
        // Reminder: sectors  1-24 are lower sectors  ( 1-12->z>0,13-24->z<0)
        //           sectors 25-72 are the upper ones (25-48->z>0,49-72->z<0)
        // SecLows - number of lower sectors specified (up to 6)
        // SecUps - number of upper sectors specified (up to 12)
        // Sens - sensitive strips for the Slow Simulator !!!
        // This does NOT work if all S or L-sectors are specified, i.e.
        // if SecAL or SecAU < 0
        //---------------------------------------------------------------------
        //  gROOT->LoadMacro("SetTPCParam.C");
        //  AliTPCParam *param = SetTPCParam();
        AliTPC *TPC = new AliTPCv2("TPC", "Default");
        // All sectors included 
        TPC->SetSecAL(-1);
        TPC->SetSecAU(-1);
    }
    if (iTOF){
        //=================== TOF parameters ============================
        AliTOF *TOF = new AliTOFv2("TOF", "normal TOF");
    }
    if (iRICH){
        //=================== RICH parameters ===========================
        AliRICH *RICH = new AliRICHv3("RICH", "normal RICH");
    }
    if (iZDC){
        //=================== ZDC parameters ============================
        AliZDC *ZDC = new AliZDCv2("ZDC", "normal ZDC");
    }
    if (iTRD){
        //=================== TRD parameters ============================
        AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
        // Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe +
	// 10% CO2)
        TRD->SetGasMix(1);
        // With hole in front of PHOS
        TRD->SetPHOShole();
        // With hole in front of RICH
        TRD->SetRICHhole();
        // Switch on TR
        AliTRDsim *TRDsim = TRD->CreateTR();
    }
    if (iFMD){
        //=================== FMD parameters ============================
        AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
        FMD->SetRingsSi1(256);
        FMD->SetRingsSi2(64);
        FMD->SetSectorsSi1(20);
        FMD->SetSectorsSi2(24);
    }
    if (iMUON){
        //=================== MUON parameters ===========================
        AliMUON *MUON = new AliMUONv1("MUON", "default");
    }
    if (iPHOS){
	//=================== PHOS parameters ===========================
        AliPHOS *PHOS = new AliPHOSv1("PHOS", "GPS2");
    }
    if (iPMD){
        //=================== PMD parameters ============================
        AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
        PMD->SetPAR(1., 1., 0.8, 0.02);
        PMD->SetIN(6., 18., -580., 27., 27.);
        PMD->SetGEO(0.0, 0.2, 4.);
        PMD->SetPadSize(0.8, 1.0, 1.0, 1.5);
    }
    if (iEMCAL){
        //=================== EMCAL parameters ============================
        AliEMCAL *EMCAL = new AliEMCALv1("EMCAL", "G56_2_55_19_104_14");
    }
    if (iT0){
        //=================== T0 parameters ============================
        AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
    }
}
//----------------------------------------------------------------------
Float_t EtaToTheta(Float_t arg){
  return (180./TMath::Pi())*2.*atan(exp(-arg));
}
Commit	Line	Data
9bb2665f	1	#include <TPDGCode.h>
9bb2665f	2
b3d9d240	3	void Config(){
	4	// 7-DEC-2000 09:00
	5	// Switch on Transition Radiation simulation. 6/12/00 18:00
	6	// iZDC=1 7/12/00 09:00
	7	// ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
	8	// Theta range given through pseudorapidity limits 22/6/2001
	9
	10	// Set Random Number seed
	11	// gRandom->SetSeed(12345);
	12
	13	// libraries required by geant321
	14	gSystem->Load("libgeant321");
	15
	16	new TGeant3("C++ Interface to Geant3");
	17
	18	if (!gSystem->Getenv("CONFIG_FILE"))
	19	{
	20	TFile *rootfile = new TFile("galice.root", "recreate");
	21
	22	rootfile->SetCompressionLevel(2);
	23	}
	24
	25	TGeant3 geant3 = (TGeant3 ) gMC;
	26
	27	//
	28	// Set External decayer
	29	AliDecayer *decayer = new AliDecayerPythia();
	30
	31	decayer->SetForceDecay(kAll);
	32	decayer->Init();
	33	gMC->SetExternalDecayer(decayer);
	34	//
	35	//
	36	//=======================================================================
	37	// ***** GEANT STEERING parameters FOR ALICE SIMULATION *****
	38	geant3->SetTRIG(1); //Number of events to be processed
	39	geant3->SetSWIT(4, 10);
	40	geant3->SetDEBU(0, 0, 1);
	41	//geant3->SetSWIT(2,2);
	42	geant3->SetDCAY(1);
	43	geant3->SetPAIR(1);
	44	geant3->SetCOMP(1);
	45	geant3->SetPHOT(1);
	46	geant3->SetPFIS(0);
	47	geant3->SetDRAY(0);
	48	geant3->SetANNI(1);
	49	geant3->SetBREM(1);
	50	geant3->SetMUNU(1);
	51	geant3->SetCKOV(1);
	52	geant3->SetHADR(1); //Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3)
	53	geant3->SetLOSS(2);
	54	geant3->SetMULS(1);
	55	geant3->SetRAYL(1);
	56	geant3->SetAUTO(1); //Select automatic STMIN etc... calc. (AUTO 1) or manual (AUTO 0)
	57	geant3->SetABAN(0); //Restore 3.16 behaviour for abandoned tracks
	58	geant3->SetOPTI(2); //Select optimisation level for GEANT geometry searches (0,1,2)
	59	geant3->SetERAN(5.e-7);
	60
	61	Float_t cut = 1.e-3; // 1MeV cut by default
	62	Float_t tofmax = 1.e10;
	63
	64	// GAM ELEC NHAD CHAD MUON EBREM MUHAB EDEL MUDEL MUPA TOFMAX
	65	geant3->SetCUTS(cut, cut, cut, cut, cut, cut, cut, cut, cut, cut,
	66	tofmax);
67	//
68	//=======================================================================
69	// *********** STEERING parameters FOR ALICE SIMULATION ************
70	// --- Specify event type to be tracked through the ALICE setup
71	// --- All positions are in cm, angles in degrees, and P and E in GeV
72	if (gSystem->Getenv("CONFIG_NPARTICLES")){
73	int nParticles = atoi(gSystem->Getenv("CONFIG_NPARTICLES"));
74	}else{
75	int nParticles = 2;
76	} // end if
77	//*********************************************
78	// Example for Fixed Particle Gun
79	//*********************************************
80	AliGenFixed *gener = new AliGenFixed(nParticles);
81	gener->SetMomentum(50);
82	gener->SetPhi(180.);
83	gener->SetTheta(95.);
84	gener->SetOrigin(0,0,0); //vertex position
9bb2665f	85	gener->SetPart(kMuonMinus);
b3d9d240	86	gener->Init();
	87	//
	88	// Activate this line if you want the vertex smearing to happen
	89	// track by track
	90	//
	91	//gener->SetVertexSmear(perTrack);
	92
	93	gAlice->SetField(-999, 2); //Specify maximum magnetic field in Tesla (neg. ==> default field)
	94
	95	Int_t iABSO = 1;
	96	Int_t iDIPO = 1;
	97	Int_t iFMD = 1;
	98	Int_t iFRAME = 1;
	99	Int_t iHALL = 1;
	100	Int_t iITS = 1;
	101	Int_t iMAG = 1;
	102	Int_t iMUON = 1;
	103	Int_t iPHOS = 1;
	104	Int_t iPIPE = 1;
	105	Int_t iPMD = 1;
	106	Int_t iRICH = 1;
	107	Int_t iSHIL = 1;
ababa197	108	Int_t iT0 = 1;
b3d9d240	109	Int_t iTOF = 1;
	110	Int_t iTPC = 1;
	111	Int_t iTRD = 1;
	112	Int_t iZDC = 1;
	113	Int_t iEMCAL = 1;
	114
	115	//=================== Alice BODY parameters =============================
	116	AliBODY *BODY = new AliBODY("BODY", "Alice envelop");
	117
	118	if (iMAG){
	119	//=================== MAG parameters ============================
	120	// --- Start with Magnet since detector layouts may be depending ---
	121	// --- on the selected Magnet dimensions ---
	122	AliMAG *MAG = new AliMAG("MAG", "Magnet");
	123	}
	124	if (iABSO){
	125	//=================== ABSO parameters ============================
	126	AliABSO *ABSO = new AliABSOv0("ABSO", "Muon Absorber");
	127	}
	128	if (iDIPO){
	129	//=================== DIPO parameters ============================
	130	AliDIPO *DIPO = new AliDIPOv2("DIPO", "Dipole version 2");
	131	}
	132	if (iHALL){
	133	//=================== HALL parameters ============================
	134	AliHALL *HALL = new AliHALL("HALL", "Alice Hall");
	135	}
	136	if (iFRAME){
	137	//=================== FRAME parameters ============================
	138	AliFRAME *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
	139	}
	140	if (iSHIL){
	141	//=================== SHIL parameters ============================
	142	AliSHIL *SHIL = new AliSHILvF("SHIL", "Shielding");
	143	}
	144	if (iPIPE){
	145	//=================== PIPE parameters ============================
	146	AliPIPE *PIPE = new AliPIPEv0("PIPE", "Beam Pipe");
	147	}
	148	if(iITS) {
	149	//=================== ITS parameters ============================
	150	//
	151	// As the innermost detector in ALICE, the Inner Tracking System
	152	// "impacts" on almost all other detectors. This involves the fact
	153	// that the ITS geometry still has several options to be followed
	154	//in parallel in order to determine the best set-up which minimizes
	155	// the induced background. All the geometries available to date are
	156	// described in the following. Read carefully the comments and use
	157	// the default version (the only one uncommented) unless you are making
	158	// comparisons and you know what you are doing. In this case just
	159	// uncomment the ITS geometry you want to use and run Aliroot.
	160	// Detailed geometries:
	161	AliITSvPPRasymm *ITS = new AliITSvPPRasymm("ITS","New ITS PPR detailed version with asymmetric services");
	162	ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
	163	ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
	164	ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
	165	ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
	166	ITS->SetThicknessChip1(200.); // chip thickness on layer 1 must be in the range [150,300]
	167	ITS->SetThicknessChip2(200.);// chip thickness on layer 2 must be in the range [150,300]
	168	ITS->SetRails(1); // 1 --> rails in ; 0 --> rails out
	169	ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
	170	// Geant3 <-> EUCLID conversion
	171	// ============================
	172	// SetEUCLID is a flag to output (=1) or not to output (=0) both
173	// geometry and media to two ASCII files (called by default
174	// ITSgeometry.euc and ITSgeometry.tme) in a format understandable
175	// to the CAD system EUCLID. The default (=0) means that you dont
176	// want to use this facility.
177	ITS->SetEUCLID(0);
178	}
179	if (iTPC){
180	//============================ TPC parameters =========================
181	// This allows the user to specify sectors for the SLOW (TPC geometry
182	// 2) Simulator. SecAL (SecAU) <0 means that ALL lower (upper)
183	// sectors are specified, any value other than that requires at least
184	// one sector (lower or upper)to be specified!
185	// Reminder: sectors 1-24 are lower sectors ( 1-12->z>0,13-24->z<0)
186	// sectors 25-72 are the upper ones (25-48->z>0,49-72->z<0)
187	// SecLows - number of lower sectors specified (up to 6)
188	// SecUps - number of upper sectors specified (up to 12)
189	// Sens - sensitive strips for the Slow Simulator !!!
190	// This does NOT work if all S or L-sectors are specified, i.e.
191	// if SecAL or SecAU < 0
192	//---------------------------------------------------------------------
193	// gROOT->LoadMacro("SetTPCParam.C");
194	// AliTPCParam *param = SetTPCParam();
195	AliTPC *TPC = new AliTPCv2("TPC", "Default");
196	// All sectors included
197	TPC->SetSecAL(-1);
198	TPC->SetSecAU(-1);
199	}
200	if (iTOF){
201	//=================== TOF parameters ============================
202	AliTOF *TOF = new AliTOFv2("TOF", "normal TOF");
203	}
204	if (iRICH){
205	//=================== RICH parameters ===========================
206	AliRICH *RICH = new AliRICHv3("RICH", "normal RICH");
207	}
208	if (iZDC){
209	//=================== ZDC parameters ============================
210	AliZDC *ZDC = new AliZDCv2("ZDC", "normal ZDC");
211	}
212	if (iTRD){
213	//=================== TRD parameters ============================
214	AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
215	// Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe +
216	// 10% CO2)
217	TRD->SetGasMix(1);
218	// With hole in front of PHOS
219	TRD->SetPHOShole();
220	// With hole in front of RICH
221	TRD->SetRICHhole();
222	// Switch on TR
223	AliTRDsim *TRDsim = TRD->CreateTR();
224	}
225	if (iFMD){
226	//=================== FMD parameters ============================
227	AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
228	FMD->SetRingsSi1(256);
229	FMD->SetRingsSi2(64);
230	FMD->SetSectorsSi1(20);
231	FMD->SetSectorsSi2(24);
232	}
233	if (iMUON){
234	//=================== MUON parameters ===========================
235	AliMUON *MUON = new AliMUONv1("MUON", "default");
236	}
237	if (iPHOS){
238	//=================== PHOS parameters ===========================
239	AliPHOS *PHOS = new AliPHOSv1("PHOS", "GPS2");
240	}
241	if (iPMD){
242	//=================== PMD parameters ============================
243	AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
244	PMD->SetPAR(1., 1., 0.8, 0.02);
245	PMD->SetIN(6., 18., -580., 27., 27.);
246	PMD->SetGEO(0.0, 0.2, 4.);
247	PMD->SetPadSize(0.8, 1.0, 1.0, 1.5);
248	}
249	if (iEMCAL){
250	//=================== EMCAL parameters ============================
251	AliEMCAL *EMCAL = new AliEMCALv1("EMCAL", "G56_2_55_19_104_14");
252	}
ababa197	253	if (iT0){
	254	//=================== T0 parameters ============================
	255	AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
b3d9d240	256	}
	257	}
	258	//----------------------------------------------------------------------
	259	Float_t EtaToTheta(Float_t arg){
	260	return (180./TMath::Pi())2.atan(exp(-arg));
	261	}