[u/mrichter/AliRoot.git] / macros / ConfigPPR.C

// One can use the configuration macro in compiled mode by
// root [0] gSystem->Load("libgeant321");
// root [0] gSystem->SetIncludePath("-I$ROOTSYS/include -I$ALICE_ROOT/include\
//                   -I$ALICE_ROOT -I$ALICE/geant3/TGeant3");
// root [0] .x grun.C(1,"ConfigPPR.C++")

#if !defined(__CINT__) || defined(__MAKECINT__)
#include <Riostream.h>
#include <TRandom.h>
#include <TSystem.h>
#include <TVirtualMC.h>
#include <TGeant3TGeo.h>
#include <TPDGCode.h>
#include <TF1.h>
#include "STEER/AliRunLoader.h"
#include "STEER/AliRun.h"
#include "STEER/AliConfig.h"
#include "STEER/AliGenerator.h"
#include "STEER/AliLog.h"
#include "PYTHIA6/AliDecayerPythia.h"
#include "EVGEN/AliGenHIJINGpara.h"
#include "THijing/AliGenHijing.h"
#include "EVGEN/AliGenCocktail.h"
#include "EVGEN/AliGenSlowNucleons.h"
#include "EVGEN/AliSlowNucleonModelExp.h"
#include "EVGEN/AliGenParam.h"
#include "EVGEN/AliGenMUONlib.h"
#include "EVGEN/AliGenSTRANGElib.h"
#include "EVGEN/AliGenMUONCocktail.h"
#include "EVGEN/AliGenCocktail.h"
#include "EVGEN/AliGenGeVSim.h"
#include "EVGEN/AliGeVSimParticle.h"
#include "PYTHIA6/AliGenPythia.h"
#include "STEER/AliMagFMaps.h"
#include "STRUCT/AliBODY.h"
#include "STRUCT/AliMAG.h"
#include "STRUCT/AliABSOv3.h"
#include "STRUCT/AliDIPOv3.h"
#include "STRUCT/AliHALLv3.h"
#include "STRUCT/AliFRAMEv2.h"
#include "STRUCT/AliSHILv3.h"
#include "STRUCT/AliPIPEv3.h"
#include "ITS/AliITSv11Hybrid.h"
#include "TPC/AliTPCv2.h"
#include "TOF/AliTOFv6T0.h"
#include "HMPID/AliHMPIDv3.h"
#include "ZDC/AliZDCv3.h"
#include "TRD/AliTRDv1.h"
#include "FMD/AliFMDv1.h"
#include "MUON/AliMUONv1.h"
#include "PHOS/AliPHOSv1.h"
#include "PMD/AliPMDv1.h"
#include "T0/AliT0v1.h"
#include "EMCAL/AliEMCALv2.h"
#include "ACORDE/AliACORDEv0.h"
#include "VZERO/AliVZEROv7.h"
#endif

enum PprRun_t 
{
    test50,
    kParam_8000,   kParam_4000,  kParam_2000, 
    kHijing_cent1, kHijing_cent2, 
    kHijing_per1,  kHijing_per2, kHijing_per3, kHijing_per4,  kHijing_per5,
    kHijing_jj25,  kHijing_jj50, kHijing_jj75, kHijing_jj100, kHijing_jj200, 
    kHijing_gj25,  kHijing_gj50, kHijing_gj75, kHijing_gj100, kHijing_gj200,
    kHijing_pA, kPythia6, 
    kPythia6Jets20_24,   kPythia6Jets24_29,   kPythia6Jets29_35,
    kPythia6Jets35_42,   kPythia6Jets42_50,   kPythia6Jets50_60,
    kPythia6Jets60_72,   kPythia6Jets72_86,   kPythia6Jets86_104,
    kPythia6Jets104_125, kPythia6Jets125_150, kPythia6Jets150_180,
    kD0PbPb5500, kCharmSemiElPbPb5500, kBeautySemiElPbPb5500,
    kCocktailTRD, kPyJJ, kPyGJ, 
    kMuonCocktailCent1, kMuonCocktailPer1, kMuonCocktailPer4, 
    kMuonCocktailCent1HighPt, kMuonCocktailPer1HighPt, kMuonCocktailPer4HighPt,
    kMuonCocktailCent1Single, kMuonCocktailPer1Single, kMuonCocktailPer4Single,
    kFlow_2_2000, kFlow_10_2000, kFlow_6_2000, kFlow_6_5000,
    kHIJINGplus, kRunMax
};

const char* pprRunName[] = {
    "test50",
    "kParam_8000",   "kParam_4000",  "kParam_2000", 
    "kHijing_cent1", "kHijing_cent2", 
    "kHijing_per1",  "kHijing_per2", "kHijing_per3", "kHijing_per4",  
    "kHijing_per5",
    "kHijing_jj25",  "kHijing_jj50", "kHijing_jj75", "kHijing_jj100", 
    "kHijing_jj200", 
    "kHijing_gj25",  "kHijing_gj50", "kHijing_gj75", "kHijing_gj100", 
    "kHijing_gj200", "kHijing_pA", "kPythia6", 
    "kPythia6Jets20_24",   "kPythia6Jets24_29",   "kPythia6Jets29_35",
    "kPythia6Jets35_42",   "kPythia6Jets42_50",   "kPythia6Jets50_60",
    "kPythia6Jets60_72",   "kPythia6Jets72_86",   "kPythia6Jets86_104",
    "kPythia6Jets104_125", "kPythia6Jets125_150", "kPythia6Jets150_180",
    "kD0PbPb5500", "kCharmSemiElPbPb5500", "kBeautySemiElPbPb5500",
    "kCocktailTRD", "kPyJJ", "kPyGJ", 
    "kMuonCocktailCent1", "kMuonCocktailPer1", "kMuonCocktailPer4",  
    "kMuonCocktailCent1HighPt", "kMuonCocktailPer1HighPt", "kMuonCocktailPer4HighPt",
    "kMuonCocktailCent1Single", "kMuonCocktailPer1Single", "kMuonCocktailPer4Single",
    "kFlow_2_2000", "kFlow_10_2000", "kFlow_6_2000", "kFlow_6_5000", "kHIJINGplus"
};

enum PprRad_t
{
    kGluonRadiation, kNoGluonRadiation
};

enum PprMag_t
{
    k2kG, k4kG, k5kG
};

enum PprTrigConf_t
{
    kDefaultPPTrig, kDefaultPbPbTrig
};

const char * pprTrigConfName[] = {
    "p-p","Pb-Pb"
};

enum PprGeo_t
  {
    kHoles, kNoHoles
  };

// This part for configuration    
//static PprRun_t srun = test50;
static PprRun_t srun  = kHIJINGplus;
static PprRad_t srad  = kGluonRadiation;
static PprMag_t smag  = k5kG;
static PprGeo_t geo   = kHoles;
static Int_t    sseed = 12345; //Set 0 to use the current time
//static PprTrigConf_t strig = kDefaultPPTrig; // default pp trigger configuration
static PprTrigConf_t strig = kDefaultPbPbTrig; // default PbPb trigger configuration

// Comment line 
static TString  comment;

// Functions
Float_t EtaToTheta(Float_t arg);
AliGenerator* GeneratorFactory(PprRun_t srun);
AliGenHijing* HijingStandard();
AliGenGeVSim* GeVSimStandard(Float_t, Float_t);
void ProcessEnvironmentVars();
void LoadPythia();

void Config()
{
    // ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
    // Theta range given through pseudorapidity limits 22/6/2001

    // Get settings from environment variables
    ProcessEnvironmentVars();

    // Set Random Number seed
    gRandom->SetSeed(sseed);
    cout<<"Seed for random number generation= "<<gRandom->GetSeed()<<endl; 

    // Load Pythia libraries
    LoadPythia();
    
    // libraries required by geant321
#if defined(__CINT__)
    gSystem->Load("libgeant321");
#endif

    new     TGeant3TGeo("C++ Interface to Geant3");

    if(!AliCDBManager::Instance()->IsDefaultStorageSet()){
      AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT");
      AliCDBManager::Instance()->SetRun(0);
    }

    AliRunLoader* rl=0x0;

    AliLog::Message(AliLog::kInfo, "Creating Run Loader", "", "", "Config()"," ConfigPPR.C", __LINE__);

    rl = AliRunLoader::Open("galice.root",
			    AliConfig::GetDefaultEventFolderName(),
			    "recreate");
    if (rl == 0x0)
      {
	gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
	return;
      }
    rl->SetCompressionLevel(2);
    rl->SetNumberOfEventsPerFile(3);
    gAlice->SetRunLoader(rl);
    // gAlice->SetGeometryFromFile("geometry.root");
    // gAlice->SetGeometryFromCDB();

    // Set the trigger configuration
    gAlice->SetTriggerDescriptor(pprTrigConfName[strig]);
    cout<<"Trigger configuration is set to  "<<pprTrigConfName[strig]<<endl;

    //
    // Set External decayer
    AliDecayer *decayer = new AliDecayerPythia();


    switch (srun) {
    case kD0PbPb5500:
      decayer->SetForceDecay(kHadronicD);
      break;
    case kCharmSemiElPbPb5500:
      decayer->SetForceDecay(kSemiElectronic);
      break;
    case kBeautySemiElPbPb5500:
      decayer->SetForceDecay(kSemiElectronic);
      break;
    default:
      decayer->SetForceDecay(kAll);
      break;
    }
    decayer->Init();
    gMC->SetExternalDecayer(decayer);
    //
    //
    //=======================================================================
    //
    //=======================================================================
    // ************* STEERING parameters FOR ALICE SIMULATION **************
    // --- Specify event type to be tracked through the ALICE setup
    // --- All positions are in cm, angles in degrees, and P and E in GeV

    gMC->SetProcess("DCAY",1);
    gMC->SetProcess("PAIR",1);
    gMC->SetProcess("COMP",1);
    gMC->SetProcess("PHOT",1);
    gMC->SetProcess("PFIS",0);
    gMC->SetProcess("DRAY",0);
    gMC->SetProcess("ANNI",1);
    gMC->SetProcess("BREM",1);
    gMC->SetProcess("MUNU",1);
    gMC->SetProcess("CKOV",1);
    gMC->SetProcess("HADR",1);
    gMC->SetProcess("LOSS",2);
    gMC->SetProcess("MULS",1);
    gMC->SetProcess("RAYL",1);

    Float_t cut = 1.e-3;        // 1MeV cut by default
    Float_t tofmax = 1.e10;

    gMC->SetCut("CUTGAM", cut);
    gMC->SetCut("CUTELE", cut);
    gMC->SetCut("CUTNEU", cut);
    gMC->SetCut("CUTHAD", cut);
    gMC->SetCut("CUTMUO", cut);
    gMC->SetCut("BCUTE",  cut); 
    gMC->SetCut("BCUTM",  cut); 
    gMC->SetCut("DCUTE",  cut); 
    gMC->SetCut("DCUTM",  cut); 
    gMC->SetCut("PPCUTM", cut);
    gMC->SetCut("TOFMAX", tofmax); 

    // Debug and log level
    AliLog::SetGlobalDebugLevel(0);
    AliLog::SetGlobalLogLevel(AliLog::kError);

    // Generator Configuration
    AliGenerator* gener = GeneratorFactory(srun);
    gener->SetOrigin(0, 0, 0);    // vertex position
    gener->SetSigma(0, 0, 5.3);   // Sigma in (X,Y,Z) (cm) on IP position
    gener->SetCutVertexZ(1.);     // Truncate at 1 sigma
    gener->SetVertexSmear(kPerEvent); 
    gener->SetTrackingFlag(1);
    gener->Init();
    
    if (smag == k2kG) {
	comment = comment.Append(" | L3 field 0.2 T");
    } else if (smag == k4kG) {
	comment = comment.Append(" | L3 field 0.4 T");
    } else if (smag == k5kG) {
	comment = comment.Append(" | L3 field 0.5 T");
    }
    
    
    if (srad == kGluonRadiation)
    {
	comment = comment.Append(" | Gluon Radiation On");
	
    } else {
	comment = comment.Append(" | Gluon Radiation Off");
    }

    printf("\n \n Comment: %s \n \n", comment.Data());
    
    
// Field (L3 0.4 T)
    AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 1., 10., smag);
    field->SetL3ConstField(0); //Using const. field in the barrel
    rl->CdGAFile();
    gAlice->SetField(field);    
//
    Int_t   iABSO   = 1;
    Int_t   iDIPO   = 1;
    Int_t   iFMD    = 1;
    Int_t   iFRAME  = 1;
    Int_t   iHALL   = 1;
    Int_t   iITS    = 1;
    Int_t   iMAG    = 1;
    Int_t   iMUON   = 1;
    Int_t   iPHOS   = 1;
    Int_t   iPIPE   = 1;
    Int_t   iPMD    = 1;
    Int_t   iHMPID   = 1;
    Int_t   iSHIL   = 1;
    Int_t   iT0  = 1;
    Int_t   iTOF    = 1;
    Int_t   iTPC    = 1;
    Int_t   iTRD    = 1;
    Int_t   iZDC    = 1;
    Int_t   iEMCAL  = 1;
    Int_t   iVZERO  = 1;
    Int_t   iACORDE    = 0;

    //=================== Alice BODY parameters =============================
    AliBODY *BODY = new AliBODY("BODY", "Alice envelop");


    if (iMAG)
    {
        //=================== MAG parameters ============================
        // --- Start with Magnet since detector layouts may be depending ---
        // --- on the selected Magnet dimensions ---
        AliMAG *MAG = new AliMAG("MAG", "Magnet");
    }


    if (iABSO)
    {
        //=================== ABSO parameters ============================
        AliABSO *ABSO = new AliABSOv3("ABSO", "Muon Absorber");
    }

    if (iDIPO)
    {
        //=================== DIPO parameters ============================

        AliDIPO *DIPO = new AliDIPOv3("DIPO", "Dipole version 3");
    }

    if (iHALL)
    {
        //=================== HALL parameters ============================

        AliHALL *HALL = new AliHALLv3("HALL", "Alice Hall");
    }


    if (iFRAME)
    {
        //=================== FRAME parameters ============================

        AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
        if (geo == kHoles) {
	  FRAME->SetHoles(1);
	} else {
	  FRAME->SetHoles(0);
	}
    }

    if (iSHIL)
    {
        //=================== SHIL parameters ============================

        AliSHIL *SHIL = new AliSHILv3("SHIL", "Shielding Version 3");
    }


    if (iPIPE)
    {
        //=================== PIPE parameters ============================

        AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
    }
 
    if (iITS)
    {
       //=================== ITS parameters ============================

	AliITS *ITS  = new AliITSv11Hybrid("ITS","ITS v11Hybrid");
    }

    if (iTPC)
    {
      //============================ TPC parameters =====================
        AliTPC *TPC = new AliTPCv2("TPC", "Default");
    }


    if (iTOF) {
        //=================== TOF parameters ============================
	AliTOF *TOF = new AliTOFv6T0("TOF", "normal TOF");
    }


    if (iHMPID)
    {
        //=================== HMPID parameters ===========================
        AliHMPID *HMPID = new AliHMPIDv3("HMPID", "normal HMPID");

    }


    if (iZDC)
    {
        //=================== ZDC parameters ============================

        AliZDC *ZDC = new AliZDCv3("ZDC", "normal ZDC");
    }

    if (iTRD)
    {
        //=================== TRD parameters ============================

        AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
    }

    if (iFMD)
    {
        //=================== FMD parameters ============================
	AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
   }

    if (iMUON)
    {
        //=================== MUON parameters ===========================
        // New MUONv1 version (geometry defined via builders)
        AliMUON *MUON = new AliMUONv1("MUON", "default");
    }
    //=================== PHOS parameters ===========================

    if (iPHOS)
    {
        AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
    }


    if (iPMD)
    {
        //=================== PMD parameters ============================
        AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
    }

    if (iT0)
    {
        //=================== T0 parameters ============================
        AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
    }

    if (iEMCAL)
    {
        //=================== EMCAL parameters ============================
        AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "SHISH_77_TRD1_2X2_FINAL_110DEG");
    }

     if (iACORDE)
    {
        //=================== ACORDE parameters ============================
        AliACORDE *ACORDE = new AliACORDEv0("ACORDE", "normal ACORDE");
    }

     if (iVZERO)
    {
        //=================== VZERO parameters ============================
        AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
    }
 
             
}

Float_t EtaToTheta(Float_t arg){
  return (180./TMath::Pi())*2.*atan(exp(-arg));
}


AliGenerator* GeneratorFactory(PprRun_t srun) {
    Int_t isw = 3;
    if (srad == kNoGluonRadiation) isw = 0;
    

    AliGenerator * gGener = 0x0;
    switch (srun) {
    case test50:
      {
	comment = comment.Append(":HIJINGparam test 50 particles");
	AliGenHIJINGpara *gener = new AliGenHIJINGpara(50);
	gener->SetMomentumRange(0, 999999.);
	gener->SetPhiRange(0., 360.);
	// Set pseudorapidity range from -8 to 8.
	Float_t thmin = EtaToTheta(8);   // theta min. <---> eta max
	Float_t thmax = EtaToTheta(-8);  // theta max. <---> eta min 
	gener->SetThetaRange(thmin,thmax);
	gGener=gener;
      }
      break;
    case kParam_8000:
      {
	comment = comment.Append(":HIJINGparam N=8000");
	AliGenHIJINGpara *gener = new AliGenHIJINGpara(86030);
	gener->SetMomentumRange(0, 999999.);
	gener->SetPhiRange(0., 360.);
	// Set pseudorapidity range from -8 to 8.
	Float_t thmin = EtaToTheta(8);   // theta min. <---> eta max
	Float_t thmax = EtaToTheta(-8);  // theta max. <---> eta min 
	gener->SetThetaRange(thmin,thmax);
	gGener=gener;
      }
      break;
    case kParam_4000:
      {
	comment = comment.Append("HIJINGparam N=4000");
	AliGenHIJINGpara *gener = new AliGenHIJINGpara(43015);
	gener->SetMomentumRange(0, 999999.);
	gener->SetPhiRange(0., 360.);
	// Set pseudorapidity range from -8 to 8.
	Float_t thmin = EtaToTheta(8);   // theta min. <---> eta max
	Float_t thmax = EtaToTheta(-8);  // theta max. <---> eta min 
	gener->SetThetaRange(thmin,thmax);
	gGener=gener;
      }
	break;
    case kParam_2000:
      {
	comment = comment.Append("HIJINGparam N=2000");
	AliGenHIJINGpara *gener = new AliGenHIJINGpara(21507);
	gener->SetMomentumRange(0, 999999.);
	gener->SetPhiRange(0., 360.);
	// Set pseudorapidity range from -8 to 8.
	Float_t thmin = EtaToTheta(8);   // theta min. <---> eta max
	Float_t thmax = EtaToTheta(-8);  // theta max. <---> eta min 
	gener->SetThetaRange(thmin,thmax);
	gGener=gener;
      }
      break;
//
//  Hijing Central
//
    case kHijing_cent1:
      {
	comment = comment.Append("HIJING cent1");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(0., 5.);
	gGener=gener;
      }
      break;
    case kHijing_cent2:
      {
	comment = comment.Append("HIJING cent2");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(0., 2.);
	gGener=gener;
      }
      break;
//
// Hijing Peripheral 
//
    case kHijing_per1:
      {
	comment = comment.Append("HIJING per1");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(5., 8.6);
	gGener=gener;
      }
      break;
    case kHijing_per2:
      {
	comment = comment.Append("HIJING per2");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(8.6, 11.2);
	gGener=gener;
      }
      break;
    case kHijing_per3:
      {
	comment = comment.Append("HIJING per3");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(11.2, 13.2);
	gGener=gener;
      }
      break;
    case kHijing_per4:
      {
	comment = comment.Append("HIJING per4");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(13.2, 15.);
	gGener=gener;
      }
      break;
    case kHijing_per5:
      {
	comment = comment.Append("HIJING per5");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(15., 100.);
	gGener=gener;
      }
      break;
//
//  Jet-Jet
//
    case kHijing_jj25:
      {
	comment = comment.Append("HIJING Jet 25 GeV");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(0., 5.);
	// trigger
	gener->SetTrigger(1);
	gener->SetPtJet(25.);
	gener->SetRadiation(isw);
	gener->SetSimpleJets(!isw);
	gener->SetJetEtaRange(-0.3,0.3);
	gener->SetJetPhiRange(75., 165.);   
	gGener=gener;
      }
      break;

    case kHijing_jj50:
      {
	comment = comment.Append("HIJING Jet 50 GeV");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(0., 5.);
	// trigger
	gener->SetTrigger(1);
	gener->SetPtJet(50.);
	gener->SetRadiation(isw);
	gener->SetSimpleJets(!isw);
	gener->SetJetEtaRange(-0.3,0.3);
	gener->SetJetPhiRange(75., 165.);   
	gGener=gener;
      }
	break;

    case kHijing_jj75:
      {
	comment = comment.Append("HIJING Jet 75 GeV");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(0., 5.);
	// trigger
	gener->SetTrigger(1);
	gener->SetPtJet(75.);
	gener->SetRadiation(isw);
	gener->SetSimpleJets(!isw);
	gener->SetJetEtaRange(-0.3,0.3);
	gener->SetJetPhiRange(75., 165.);   
	gGener=gener;
      }
      break;

    case kHijing_jj100:
      {
	comment = comment.Append("HIJING Jet 100 GeV");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(0., 5.);
	// trigger
	gener->SetTrigger(1);
	gener->SetPtJet(100.);
	gener->SetRadiation(isw);
	gener->SetSimpleJets(!isw);
	gener->SetJetEtaRange(-0.3,0.3);
	gener->SetJetPhiRange(75., 165.);   
	gGener=gener;
      }
      break;

    case kHijing_jj200:
      {
	comment = comment.Append("HIJING Jet 200 GeV");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(0., 5.);
	// trigger
	gener->SetTrigger(1);
	gener->SetPtJet(200.);
	gener->SetRadiation(isw);
	gener->SetSimpleJets(!isw);
	gener->SetJetEtaRange(-0.3,0.3);
	gener->SetJetPhiRange(75., 165.);   
	gGener=gener;
      }
      break;
//
// Gamma-Jet
//
    case kHijing_gj25:
      {
	comment = comment.Append("HIJING Gamma 25 GeV");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(0., 5.);
	// trigger
	gener->SetTrigger(2);
	gener->SetPtJet(25.);
	gener->SetRadiation(isw);
	gener->SetSimpleJets(!isw);
	gener->SetJetEtaRange(-0.12, 0.12);
        gener->SetJetPhiRange(220., 320.);
	gGener=gener;
      }
      break;

    case kHijing_gj50:
      {
	comment = comment.Append("HIJING Gamma 50 GeV");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(0., 5.);
	// trigger
	gener->SetTrigger(2);
	gener->SetPtJet(50.);
	gener->SetRadiation(isw);
	gener->SetSimpleJets(!isw);
	gener->SetJetEtaRange(-0.12, 0.12);
        gener->SetJetPhiRange(220., 320.);
	gGener=gener;
      }
      break;

    case kHijing_gj75:
      {
	comment = comment.Append("HIJING Gamma 75 GeV");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(0., 5.);
	// trigger
	gener->SetTrigger(2);
	gener->SetPtJet(75.);
	gener->SetRadiation(isw);
	gener->SetSimpleJets(!isw);
	gener->SetJetEtaRange(-0.12, 0.12);
        gener->SetJetPhiRange(220., 320.);
	gGener=gener;
      }
      break;

    case kHijing_gj100:
      {
	comment = comment.Append("HIJING Gamma 100 GeV");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(0., 5.);
	// trigger
	gener->SetTrigger(2);
	gener->SetPtJet(100.);
	gener->SetRadiation(isw);
	gener->SetSimpleJets(!isw);
	gener->SetJetEtaRange(-0.12, 0.12);
        gener->SetJetPhiRange(220., 320.);
	gGener=gener;
      }
      break;

    case kHijing_gj200:
      {
	comment = comment.Append("HIJING Gamma 200 GeV");
	AliGenHijing *gener = HijingStandard();
// impact parameter range
	gener->SetImpactParameterRange(0., 5.);
	// trigger
	gener->SetTrigger(2);
	gener->SetPtJet(200.);
	gener->SetRadiation(isw);
	gener->SetSimpleJets(!isw);
	gener->SetJetEtaRange(-0.12, 0.12);
        gener->SetJetPhiRange(220., 320.);
	gGener=gener;
      }
      break;
    case kHijing_pA:
      {
	comment = comment.Append("HIJING pA");

	AliGenCocktail *gener  = new AliGenCocktail();

	AliGenHijing   *hijing = new AliGenHijing(-1);
// centre of mass energy 
	hijing->SetEnergyCMS(TMath::Sqrt(82./208.) * 14000.);
// impact parameter range
	hijing->SetImpactParameterRange(0., 15.);
// reference frame
	hijing->SetReferenceFrame("CMS");
	hijing->SetBoostLHC(1);
// projectile
	hijing->SetProjectile("P", 1, 1);
	hijing->SetTarget    ("A", 208, 82);
// tell hijing to keep the full parent child chain
	hijing->KeepFullEvent();
// enable jet quenching
	hijing->SetJetQuenching(0);
// enable shadowing
	hijing->SetShadowing(1);
// Don't track spectators
	hijing->SetSpectators(0);
// kinematic selection
	hijing->SetSelectAll(0);
//
	AliGenSlowNucleons*  gray    = new AliGenSlowNucleons(1);
	AliSlowNucleonModel* model   = new AliSlowNucleonModelExp();
	gray->SetSlowNucleonModel(model);
	gray->SetDebug(1);
	gener->AddGenerator(hijing,"Hijing pPb", 1);
	gener->AddGenerator(gray,  "Gray Particles",1);
	gGener=gener;
      }
      break;
    case kPythia6:
      {
        comment = comment.Append(":Pythia p-p @ 14 TeV");
        AliGenPythia *gener = new AliGenPythia(-1); 
        gener->SetMomentumRange(0,999999);
        gener->SetThetaRange(0., 180.);
        gener->SetYRange(-12,12);
        gener->SetPtRange(0,1000);
        gener->SetProcess(kPyMb);
        gener->SetEnergyCMS(14000.);
	gGener=gener;
      }
      break;
    case kPythia6Jets20_24:
      {
        comment = comment.Append(":Pythia jets 20-24 GeV @ 5.5 TeV");
        AliGenPythia * gener = new AliGenPythia(-1);
	gener->SetEnergyCMS(5500.);//        Centre of mass energy
	gener->SetProcess(kPyJets);//        Process type
	gener->SetJetEtaRange(-0.5, 0.5);//  Final state kinematic cuts
	gener->SetJetPhiRange(0., 360.);
	gener->SetJetEtRange(10., 1000.);
	gener->SetGluonRadiation(1,1);
	//    gener->SetPtKick(0.);
	//   Structure function
	gener->SetStrucFunc(kCTEQ4L);
	gener->SetPtHard(20., 24.);// Pt transfer of the hard scattering
	gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
	gener->SetForceDecay(kAll);//  Decay type (semielectronic, etc.)
	gGener=gener;
      }
      break;
    case kPythia6Jets24_29:
      {
        comment = comment.Append(":Pythia jets 24-29 GeV @ 5.5 TeV");
        AliGenPythia * gener = new AliGenPythia(-1);
	gener->SetEnergyCMS(5500.);//        Centre of mass energy
	gener->SetProcess(kPyJets);//        Process type
	gener->SetJetEtaRange(-0.5, 0.5);//  Final state kinematic cuts
	gener->SetJetPhiRange(0., 360.);
	gener->SetJetEtRange(10., 1000.);
	gener->SetGluonRadiation(1,1);
	//    gener->SetPtKick(0.);
	//   Structure function
	gener->SetStrucFunc(kCTEQ4L);
	gener->SetPtHard(24., 29.);// Pt transfer of the hard scattering
	gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
	gener->SetForceDecay(kAll);//  Decay type (semielectronic, etc.)
	gGener=gener;
      }
      break;
    case kPythia6Jets29_35:
      {
        comment = comment.Append(":Pythia jets 29-35 GeV @ 5.5 TeV");
        AliGenPythia * gener = new AliGenPythia(-1);
	gener->SetEnergyCMS(5500.);//        Centre of mass energy
	gener->SetProcess(kPyJets);//        Process type
	gener->SetJetEtaRange(-0.5, 0.5);//  Final state kinematic cuts
	gener->SetJetPhiRange(0., 360.);
	gener->SetJetEtRange(10., 1000.);
	gener->SetGluonRadiation(1,1);
	//    gener->SetPtKick(0.);
	//   Structure function
	gener->SetStrucFunc(kCTEQ4L);
	gener->SetPtHard(29., 35.);// Pt transfer of the hard scattering
	gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
	gener->SetForceDecay(kAll);//  Decay type (semielectronic, etc.)
	gGener=gener;
      }
      break;
    case kPythia6Jets35_42:
      {
        comment = comment.Append(":Pythia jets 35-42 GeV @ 5.5 TeV");
        AliGenPythia * gener = new AliGenPythia(-1);
	gener->SetEnergyCMS(5500.);//        Centre of mass energy
	gener->SetProcess(kPyJets);//        Process type
	gener->SetJetEtaRange(-0.5, 0.5);//  Final state kinematic cuts
	gener->SetJetPhiRange(0., 360.);
	gener->SetJetEtRange(10., 1000.);
	gener->SetGluonRadiation(1,1);
	//    gener->SetPtKick(0.);
	//   Structure function
	gener->SetStrucFunc(kCTEQ4L);
	gener->SetPtHard(35., 42.);// Pt transfer of the hard scattering
	gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
	gener->SetForceDecay(kAll);//  Decay type (semielectronic, etc.)
	gGener=gener;
      }
      break;
    case kPythia6Jets42_50:
      {
        comment = comment.Append(":Pythia jets 42-50 GeV @ 5.5 TeV");
        AliGenPythia * gener = new AliGenPythia(-1);
	gener->SetEnergyCMS(5500.);//        Centre of mass energy
	gener->SetProcess(kPyJets);//        Process type
	gener->SetJetEtaRange(-0.5, 0.5);//  Final state kinematic cuts
	gener->SetJetPhiRange(0., 360.);
	gener->SetJetEtRange(10., 1000.);
	gener->SetGluonRadiation(1,1);
	//    gener->SetPtKick(0.);
	//   Structure function
	gener->SetStrucFunc(kCTEQ4L);
	gener->SetPtHard(42., 50.);// Pt transfer of the hard scattering
	gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
	gener->SetForceDecay(kAll);//  Decay type (semielectronic, etc.)
	gGener=gener;
      }
      break;
    case kPythia6Jets50_60:
      {
        comment = comment.Append(":Pythia jets 50-60 GeV @ 5.5 TeV");
        AliGenPythia * gener = new AliGenPythia(-1);
	gener->SetEnergyCMS(5500.);//        Centre of mass energy
	gener->SetProcess(kPyJets);//        Process type
	gener->SetJetEtaRange(-0.5, 0.5);//  Final state kinematic cuts
	gener->SetJetPhiRange(0., 360.);
	gener->SetJetEtRange(10., 1000.);
	gener->SetGluonRadiation(1,1);
	//    gener->SetPtKick(0.);
	//   Structure function
	gener->SetStrucFunc(kCTEQ4L);
	gener->SetPtHard(50., 60.);// Pt transfer of the hard scattering
	gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
	gener->SetForceDecay(kAll);//  Decay type (semielectronic, etc.)
	gGener=gener;
      }
      break;
    case kPythia6Jets60_72:
      {
        comment = comment.Append(":Pythia jets 60-72 GeV @ 5.5 TeV");
        AliGenPythia * gener = new AliGenPythia(-1);
	gener->SetEnergyCMS(5500.);//        Centre of mass energy
	gener->SetProcess(kPyJets);//        Process type
	gener->SetJetEtaRange(-0.5, 0.5);//  Final state kinematic cuts
	gener->SetJetPhiRange(0., 360.);
	gener->SetJetEtRange(10., 1000.);
	gener->SetGluonRadiation(1,1);
	//    gener->SetPtKick(0.);
	//   Structure function
	gener->SetStrucFunc(kCTEQ4L);
	gener->SetPtHard(60., 72.);// Pt transfer of the hard scattering
	gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
	gener->SetForceDecay(kAll);//  Decay type (semielectronic, etc.)
	gGener=gener;
      }
      break;
    case kPythia6Jets72_86:
      {
        comment = comment.Append(":Pythia jets 72-86 GeV @ 5.5 TeV");
        AliGenPythia * gener = new AliGenPythia(-1);
	gener->SetEnergyCMS(5500.);//        Centre of mass energy
	gener->SetProcess(kPyJets);//        Process type
	gener->SetJetEtaRange(-0.5, 0.5);//  Final state kinematic cuts
	gener->SetJetPhiRange(0., 360.);
	gener->SetJetEtRange(10., 1000.);
	gener->SetGluonRadiation(1,1);
	//    gener->SetPtKick(0.);
	//   Structure function
	gener->SetStrucFunc(kCTEQ4L);
	gener->SetPtHard(72., 86.);// Pt transfer of the hard scattering
	gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
	gener->SetForceDecay(kAll);//  Decay type (semielectronic, etc.)
	gGener=gener;
      }
      break;
    case kPythia6Jets86_104:
      {
        comment = comment.Append(":Pythia jets 86-104 GeV @ 5.5 TeV");
        AliGenPythia * gener = new AliGenPythia(-1);
	gener->SetEnergyCMS(5500.);//        Centre of mass energy
	gener->SetProcess(kPyJets);//        Process type
	gener->SetJetEtaRange(-0.5, 0.5);//  Final state kinematic cuts
	gener->SetJetPhiRange(0., 360.);
	gener->SetJetEtRange(10., 1000.);
	gener->SetGluonRadiation(1,1);
	//    gener->SetPtKick(0.);
	//   Structure function
	gener->SetStrucFunc(kCTEQ4L);
	gener->SetPtHard(86., 104.);// Pt transfer of the hard scattering
	gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
	gener->SetForceDecay(kAll);//  Decay type (semielectronic, etc.)
	gGener=gener;
      }
      break;
    case kPythia6Jets104_125:
      {
        comment = comment.Append(":Pythia jets 105-125 GeV @ 5.5 TeV");
        AliGenPythia * gener = new AliGenPythia(-1);
	gener->SetEnergyCMS(5500.);//        Centre of mass energy
	gener->SetProcess(kPyJets);//        Process type
	gener->SetJetEtaRange(-0.5, 0.5);//  Final state kinematic cuts
	gener->SetJetPhiRange(0., 360.);
	gener->SetJetEtRange(10., 1000.);
	gener->SetGluonRadiation(1,1);
	//    gener->SetPtKick(0.);
	//   Structure function
	gener->SetStrucFunc(kCTEQ4L);
	gener->SetPtHard(104., 125.);// Pt transfer of the hard scattering
	gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
	gener->SetForceDecay(kAll);//  Decay type (semielectronic, etc.)
	gGener=gener;
      }
      break;
    case kPythia6Jets125_150:
      {
        comment = comment.Append(":Pythia jets 125-150 GeV @ 5.5 TeV");
        AliGenPythia * gener = new AliGenPythia(-1);
	gener->SetEnergyCMS(5500.);//        Centre of mass energy
	gener->SetProcess(kPyJets);//        Process type
	gener->SetJetEtaRange(-0.5, 0.5);//  Final state kinematic cuts
	gener->SetJetPhiRange(0., 360.);
	gener->SetJetEtRange(10., 1000.);
	gener->SetGluonRadiation(1,1);
	//    gener->SetPtKick(0.);
	//   Structure function
	gener->SetStrucFunc(kCTEQ4L);
	gener->SetPtHard(125., 150.);// Pt transfer of the hard scattering
	gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
	gener->SetForceDecay(kAll);//  Decay type (semielectronic, etc.)
	gGener=gener;
      }
      break;
    case kPythia6Jets150_180:
      {
        comment = comment.Append(":Pythia jets 150-180 GeV @ 5.5 TeV");
        AliGenPythia * gener = new AliGenPythia(-1);
	gener->SetEnergyCMS(5500.);//        Centre of mass energy
	gener->SetProcess(kPyJets);//        Process type
	gener->SetJetEtaRange(-0.5, 0.5);//  Final state kinematic cuts
	gener->SetJetPhiRange(0., 360.);
	gener->SetJetEtRange(10., 1000.);
	gener->SetGluonRadiation(1,1);
	//    gener->SetPtKick(0.);
	//   Structure function
	gener->SetStrucFunc(kCTEQ4L);
	gener->SetPtHard(150., 180.);// Pt transfer of the hard scattering
	gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
	gener->SetForceDecay(kAll);//  Decay type (semielectronic, etc.)
	gGener=gener;
      }
      break;
    case kD0PbPb5500:
      {
	comment = comment.Append(" D0 in Pb-Pb at 5.5 TeV");
	AliGenPythia * gener = new AliGenPythia(10);
	gener->SetProcess(kPyD0PbPbMNR);
	gener->SetStrucFunc(kCTEQ4L);
	gener->SetPtHard(2.1,-1.0);
	gener->SetEnergyCMS(5500.);
	gener->SetNuclei(208,208);
	gener->SetForceDecay(kHadronicD);
	gener->SetYRange(-2,2);
	gener->SetFeedDownHigherFamily(kFALSE);
	gener->SetStackFillOpt(AliGenPythia::kParentSelection);
	gener->SetCountMode(AliGenPythia::kCountParents);
 	gGener=gener;
      }
      break;
    case kCharmSemiElPbPb5500:
      {
	comment = comment.Append(" Charm in Pb-Pb at 5.5 TeV");
	AliGenPythia * gener = new AliGenPythia(10);
	gener->SetProcess(kPyCharmPbPbMNR);
	gener->SetStrucFunc(kCTEQ4L);
	gener->SetPtHard(2.1,-1.0);
	gener->SetEnergyCMS(5500.);
	gener->SetNuclei(208,208);
	gener->SetForceDecay(kSemiElectronic);
	gener->SetYRange(-2,2);
	gener->SetFeedDownHigherFamily(kFALSE);
	gener->SetCountMode(AliGenPythia::kCountParents);
	gGener=gener;
      }
      break;
    case kBeautySemiElPbPb5500:
      {
	comment = comment.Append(" Beauty in Pb-Pb at 5.5 TeV");
	AliGenPythia *gener = new AliGenPythia(10);
	gener->SetProcess(kPyBeautyPbPbMNR);
	gener->SetStrucFunc(kCTEQ4L);
	gener->SetPtHard(2.75,-1.0);
	gener->SetEnergyCMS(5500.);
	gener->SetNuclei(208,208);
	gener->SetForceDecay(kSemiElectronic);
	gener->SetYRange(-2,2);
	gener->SetFeedDownHigherFamily(kFALSE);
	gener->SetCountMode(AliGenPythia::kCountParents);
	gGener=gener;
      }
      break;
    case kCocktailTRD:
      {
	comment = comment.Append(" Cocktail for TRD at 5.5 TeV");
	AliGenCocktail *gener  = new AliGenCocktail();
	
	AliGenParam *phi = new AliGenParam(10,
                                           new AliGenMUONlib(),
                                           AliGenMUONlib::kPhi,
                                           "Vogt PbPb");

	phi->SetPtRange(0, 100);
	phi->SetYRange(-1., +1.);
	phi->SetForceDecay(kDiElectron);

	AliGenParam *omega = new AliGenParam(10,
					     new AliGenMUONlib(),
					     AliGenMUONlib::kOmega,
					     "Vogt PbPb");

	omega->SetPtRange(0, 100);
	omega->SetYRange(-1., +1.);
	omega->SetForceDecay(kDiElectron);
	
	AliGenParam *jpsi = new AliGenParam(10,
					    new AliGenMUONlib(),
					    AliGenMUONlib::kJpsiFamily,
					    "Vogt PbPb");

	jpsi->SetPtRange(0, 100);
	jpsi->SetYRange(-1., +1.);
	jpsi->SetForceDecay(kDiElectron);

	AliGenParam *ups = new AliGenParam(10,
					   new AliGenMUONlib(),
					   AliGenMUONlib::kUpsilonFamily,
					   "Vogt PbPb");
	ups->SetPtRange(0, 100);
	ups->SetYRange(-1., +1.);
	ups->SetForceDecay(kDiElectron);
	
	AliGenParam *charm = new AliGenParam(10,
					     new AliGenMUONlib(), 
					     AliGenMUONlib::kCharm,
					     "central");
	charm->SetPtRange(0, 100);
	charm->SetYRange(-1.5, +1.5);
	charm->SetForceDecay(kSemiElectronic);
	
	
	AliGenParam *beauty = new AliGenParam(10,
					      new AliGenMUONlib(), 
					      AliGenMUONlib::kBeauty,
					      "central");
	beauty->SetPtRange(0, 100);
	beauty->SetYRange(-1.5, +1.5);
	beauty->SetForceDecay(kSemiElectronic);

	AliGenParam *beautyJ = new AliGenParam(10,
					       new AliGenMUONlib(), 
					       AliGenMUONlib::kBeauty,
					       "central");
	beautyJ->SetPtRange(0, 100);
	beautyJ->SetYRange(-1.5, +1.5);
	beautyJ->SetForceDecay(kBJpsiDiElectron);

	gener->AddGenerator(phi,"Phi",1);
	gener->AddGenerator(omega,"Omega",1);
	gener->AddGenerator(jpsi,"J/psi",1);
	gener->AddGenerator(ups,"Upsilon",1);
	gener->AddGenerator(charm,"Charm",1);
	gener->AddGenerator(beauty,"Beauty",1);
	gener->AddGenerator(beautyJ,"J/Psi from Beauty",1);
	gGener=gener;
      }
      break;
    case kPyJJ:
      {
	comment = comment.Append(" Jet-jet at 5.5 TeV");
	AliGenPythia *gener = new AliGenPythia(-1);
	gener->SetEnergyCMS(5500.);
	gener->SetProcess(kPyJets);
	Double_t ptHardMin=10.0, ptHardMax=-1.0;
	gener->SetPtHard(ptHardMin,ptHardMax);
	gener->SetYHard(-0.7,0.7);
	gener->SetJetEtaRange(-0.2,0.2);
	gener->SetEventListRange(0,1);
	gGener=gener;
      }
      break;
    case kPyGJ:
      {
	comment = comment.Append(" Gamma-jet at 5.5 TeV");
	AliGenPythia *gener = new AliGenPythia(-1);
	gener->SetEnergyCMS(5500.);
	gener->SetProcess(kPyDirectGamma);
	Double_t ptHardMin=10.0, ptHardMax=-1.0;
	gener->SetPtHard(ptHardMin,ptHardMax);
	gener->SetYHard(-1.0,1.0);
	gener->SetGammaEtaRange(-0.13,0.13);
	gener->SetGammaPhiRange(210.,330.);
	gener->SetEventListRange(0,1);
	gGener=gener;
      }
      break;
    case kMuonCocktailCent1:
      {
	comment = comment.Append(" Muon Cocktail Cent1");
	AliGenMUONCocktail * gener = new AliGenMUONCocktail();
	gener->SetPtRange(0.4,100.);       // Transverse momentum range   
	gener->SetPhiRange(0.,360.);    // Azimuthal angle range  
	gener->SetYRange(-4.0,-2.4);
	gener->SetMuonPtCut(0.8);
	gener->SetMuonThetaCut(171.,178.);
	gener->SetMuonMultiplicity(2);
	gener->SetImpactParameterRange(0.,5.);  //Centrality class Cent1 for PDC04
	gGener=gener;
      }
      break;
    case kMuonCocktailPer1:
      {
	comment = comment.Append(" Muon Cocktail Per1");
	AliGenMUONCocktail * gener = new AliGenMUONCocktail();
	gener->SetPtRange(0.0,100.);       // Transverse momentum range   
	gener->SetPhiRange(0.,360.);    // Azimuthal angle range  
	gener->SetYRange(-4.0,-2.4);
	gener->SetMuonPtCut(0.8);
	gener->SetMuonThetaCut(171.,178.);
	gener->SetMuonMultiplicity(2);
	gener->SetImpactParameterRange(5.,8.6);//Centrality class Per1 for PDC04
	gGener=gener;
      }
      break;
    case kMuonCocktailPer4:
      {
	comment = comment.Append(" Muon Cocktail Per4");
	AliGenMUONCocktail * gener = new AliGenMUONCocktail();
	gener->SetPtRange(0.0,100.);       // Transverse momentum range   
	gener->SetPhiRange(0.,360.);    // Azimuthal angle range  
	gener->SetYRange(-4.0,-2.4);
	gener->SetMuonPtCut(0.8);
	gener->SetMuonThetaCut(171.,178.);
	gener->SetMuonMultiplicity(2);
	gener->SetImpactParameterRange(13.2,15.0);//Centrality class Per4 for PDC04
	gGener=gener;
      }
      break;
    case kMuonCocktailCent1HighPt:
      {
	comment = comment.Append(" Muon Cocktail HighPt Cent1");
	AliGenMUONCocktail * gener = new AliGenMUONCocktail();
	gener->SetPtRange(0.0,100.);       // Transverse momentum range   
	gener->SetPhiRange(0.,360.);    // Azimuthal angle range  
	gener->SetYRange(-4.0,-2.4);
	gener->SetMuonPtCut(2.5);
	gener->SetMuonThetaCut(171.,178.);
	gener->SetMuonMultiplicity(2);
	gener->SetImpactParameterRange(0.,5.);  //Centrality class Cent1 for PDC04
	gGener=gener;
      }
      break;
    case kMuonCocktailPer1HighPt :
      {
	comment = comment.Append(" Muon Cocktail HighPt Per1");
	AliGenMUONCocktail * gener = new AliGenMUONCocktail();
	gener->SetPtRange(0.0,100.);       // Transverse momentum range   
	gener->SetPhiRange(0.,360.);    // Azimuthal angle range  
	gener->SetYRange(-4.0,-2.4);
	gener->SetMuonPtCut(2.5);
	gener->SetMuonThetaCut(171.,178.);
	gener->SetMuonMultiplicity(2);
	gener->SetImpactParameterRange(5.,8.6);//Centrality class Per1 for PDC04
	gGener=gener;
      }
      break;
    case kMuonCocktailPer4HighPt:
      {
	comment = comment.Append(" Muon Cocktail HighPt Per4");
	AliGenMUONCocktail * gener = new AliGenMUONCocktail();
	gener->SetPtRange(0.0,100.);       // Transverse momentum range   
	gener->SetPhiRange(0.,360.);    // Azimuthal angle range  
	gener->SetYRange(-4.0,-2.4);
	gener->SetMuonPtCut(2.5);
	gener->SetMuonThetaCut(171.,178.);
	gener->SetMuonMultiplicity(2);
	gener->SetImpactParameterRange(13.2,15.0);//Centrality class Per4 for PDC04
	gGener=gener;
      }
      break;
    case kMuonCocktailCent1Single:
      {
	comment = comment.Append(" Muon Cocktail Single Cent1");
	AliGenMUONCocktail * gener = new AliGenMUONCocktail();
	gener->SetPtRange(0.0,100.);       // Transverse momentum range   
	gener->SetPhiRange(0.,360.);    // Azimuthal angle range  
	gener->SetYRange(-4.0,-2.4);
	gener->SetMuonPtCut(0.8);
	gener->SetMuonThetaCut(171.,178.);
	gener->SetMuonMultiplicity(1);
	gener->SetImpactParameterRange(0.,5.);  //Centrality class Cent1 for PDC04
	gGener=gener;
      }
      break;
    case kMuonCocktailPer1Single :
      {
	comment = comment.Append(" Muon Cocktail Single Per1");
	AliGenMUONCocktail * gener = new AliGenMUONCocktail();
	gener->SetPtRange(0.0,100.);       // Transverse momentum range   
	gener->SetPhiRange(0.,360.);    // Azimuthal angle range  
	gener->SetYRange(-4.0,-2.4);
	gener->SetMuonPtCut(0.8);
	gener->SetMuonThetaCut(171.,178.);
	gener->SetMuonMultiplicity(1);
	gener->SetImpactParameterRange(5.,8.6);//Centrality class Per1 for PDC04
	gener->SetNumberOfParticipants(229.3);//Centrality class Per1 for PDC04
	gGener=gener;
      }
      break;
    case kMuonCocktailPer4Single:
      {
	comment = comment.Append(" Muon Cocktail Single Per4");
	AliGenMUONCocktail * gener = new AliGenMUONCocktail();
	gener->SetPtRange(0.0,100.);       // Transverse momentum range   
	gener->SetPhiRange(0.,360.);    // Azimuthal angle range  
	gener->SetYRange(-4.0,-2.4);
	gener->SetMuonPtCut(0.8);
	gener->SetMuonThetaCut(171.,178.);
	gener->SetMuonMultiplicity(1);
	gener->SetImpactParameterRange(13.2,15.0);//Centrality class Per4 for PDC04
	gGener=gener;
      }
      break;
    case kFlow_2_2000:
    {
	comment = comment.Append(" Flow with dN/deta  = 2000, vn = 2%");
	gGener = GeVSimStandard(2000., 2.);
    }
    break;
    
    case kFlow_10_2000:
    {
	comment = comment.Append(" Flow with dN/deta  = 2000, vn = 10%");
	gGener = GeVSimStandard(2000., 10.);
    }
    break;
    
    case kFlow_6_2000:
    {
	comment = comment.Append(" Flow with dN/deta  = 2000, vn = 6%");
	gGener = GeVSimStandard(2000., 6.);
    }
    break;
    
    case kFlow_6_5000:
    {
	comment = comment.Append(" Flow with dN/deta  = 5000, vn = 6%");
	gGener = GeVSimStandard(5000., 6.);
    }
    break;
    case kHIJINGplus:
    {
	//
	// The cocktail
	AliGenCocktail *gener  = new AliGenCocktail();

	//
	// Charm production by Pythia
	AliGenPythia * genpyc = new AliGenPythia(230);
	genpyc->SetProcess(kPyCharmPbPbMNR);
	genpyc->SetStrucFunc(kCTEQ4L);
	genpyc->SetPtHard(2.1,-1.0);
	genpyc->SetEnergyCMS(5500.);
	genpyc->SetNuclei(208,208);
	genpyc->SetYRange(-999,999);
	genpyc->SetForceDecay(kAll);
	genpyc->SetFeedDownHigherFamily(kFALSE);
	genpyc->SetCountMode(AliGenPythia::kCountParents);
	//
	// Beauty production by Pythia
	AliGenPythia * genpyb = new AliGenPythia(9);
	genpyb->SetProcess(kPyBeautyPbPbMNR);
	genpyb->SetStrucFunc(kCTEQ4L);
	genpyb->SetPtHard(2.75,-1.0);
	genpyb->SetEnergyCMS(5500.);
	genpyb->SetNuclei(208,208);
	genpyb->SetYRange(-999,999);
	genpyb->SetForceDecay(kAll);
	genpyb->SetFeedDownHigherFamily(kFALSE);
	genpyb->SetCountMode(AliGenPythia::kCountParents);
        //
        // Hyperons
	//
	AliGenSTRANGElib *lib = new AliGenSTRANGElib();
	Int_t particle;
	// Xi
	particle = AliGenSTRANGElib::kXiMinus;
	AliGenParam *genXi = new AliGenParam(16,particle,lib->GetPt(particle),lib->GetY(particle),lib->GetIp(particle));
	genXi->SetPtRange(0., 12.);
	genXi->SetYRange(-1.1, 1.1);
	genXi->SetForceDecay(kNoDecay);	
 
	//
	// Omega
	particle = AliGenSTRANGElib::kOmegaMinus;
	AliGenParam *genOmega = new AliGenParam(10,particle,lib->GetPt(particle),lib->GetY(particle),lib->GetIp(particle));     
	genOmega->SetPtRange(0, 12.);
	genOmega->SetYRange(-1.1, 1.1);
	genOmega->SetForceDecay(kNoDecay);
	
	//
	// Central Hijing 
	AliGenHijing *genHi = HijingStandard();
	genHi->SwitchOffHeavyQuarks(kTRUE);
	genHi->SetImpactParameterRange(0.,5.);
        //
	// Add everything to the cocktail and shake ...
	gener->AddGenerator(genHi,    "Hijing cent1", 1);
	gener->AddGenerator(genpyc,   "Extra charm",  1);
	gener->AddGenerator(genpyb,   "Extra beauty", 1);
	gener->AddGenerator(genXi,    "Xi"          , 1);
	gener->AddGenerator(genOmega, "Omega",        1);
	gGener = gener;
    }
    break;
    default: break;
    }
    
    return gGener;
}

AliGenHijing* HijingStandard()
{
    AliGenHijing *gener = new AliGenHijing(-1);
// centre of mass energy 
    gener->SetEnergyCMS(5500.);
// reference frame
    gener->SetReferenceFrame("CMS");
// projectile
     gener->SetProjectile("A", 208, 82);
     gener->SetTarget    ("A", 208, 82);
// tell hijing to keep the full parent child chain
     gener->KeepFullEvent();
// enable jet quenching
     gener->SetJetQuenching(1);
// enable shadowing
     gener->SetShadowing(1);
// neutral pion and heavy particle decays switched off
     gener->SetDecaysOff(1);
// Don't track spectators
     gener->SetSpectators(0);
// kinematic selection
     gener->SetSelectAll(0);
     return gener;
}

AliGenGeVSim* GeVSimStandard(Float_t mult, Float_t vn)
{
    AliGenGeVSim* gener = new AliGenGeVSim(0);
//
// Mult is the number of charged particles in |eta| < 0.5
// Vn is in (%)
//
// Sigma of the Gaussian dN/deta
    Float_t sigma_eta  = 2.75;
//
// Maximum eta
    Float_t etamax     = 7.00;
//
//
// Scale from multiplicity in |eta| < 0.5 to |eta| < |etamax|	
    Float_t mm = mult * (TMath::Erf(etamax/sigma_eta/sqrt(2.)) / TMath::Erf(0.5/sigma_eta/sqrt(2.))); 
//
// Scale from charged to total multiplicity
// 
    mm *= 1.587;
//
// Vn 
    vn /= 100.;    	 
//
// Define particles
//
//
// 78% Pions (26% pi+, 26% pi-, 26% p0)              T = 250 MeV
    AliGeVSimParticle *pp =  new AliGeVSimParticle(kPiPlus,  1, 0.26 * mm, 0.25, sigma_eta) ;
    AliGeVSimParticle *pm =  new AliGeVSimParticle(kPiMinus, 1, 0.26 * mm, 0.25, sigma_eta) ;
    AliGeVSimParticle *p0 =  new AliGeVSimParticle(kPi0,     1, 0.26 * mm, 0.25, sigma_eta) ;
//
// 12% Kaons (3% K0short, 3% K0long, 3% K+, 3% K-)   T = 300 MeV
    AliGeVSimParticle *ks =  new AliGeVSimParticle(kK0Short, 1, 0.03 * mm, 0.30, sigma_eta) ;
    AliGeVSimParticle *kl =  new AliGeVSimParticle(kK0Long,  1, 0.03 * mm, 0.30, sigma_eta) ;
    AliGeVSimParticle *kp =  new AliGeVSimParticle(kKPlus,   1, 0.03 * mm, 0.30, sigma_eta) ;
    AliGeVSimParticle *km =  new AliGeVSimParticle(kKMinus,  1, 0.03 * mm, 0.30, sigma_eta) ;
//
// 10% Protons / Neutrons (5% Protons, 5% Neutrons)  T = 250 MeV
    AliGeVSimParticle *pr =  new AliGeVSimParticle(kProton,  1, 0.05 * mm, 0.25, sigma_eta) ;
    AliGeVSimParticle *ne =  new AliGeVSimParticle(kNeutron, 1, 0.05 * mm, 0.25, sigma_eta) ;
//
// Set Elliptic Flow properties 	

    Float_t pTsaturation = 2. ;

    pp->SetEllipticParam(vn,pTsaturation,0.) ;
    pm->SetEllipticParam(vn,pTsaturation,0.) ;
    p0->SetEllipticParam(vn,pTsaturation,0.) ;
    pr->SetEllipticParam(vn,pTsaturation,0.) ;
    ne->SetEllipticParam(vn,pTsaturation,0.) ;
    ks->SetEllipticParam(vn,pTsaturation,0.) ;
    kl->SetEllipticParam(vn,pTsaturation,0.) ;
    kp->SetEllipticParam(vn,pTsaturation,0.) ;
    km->SetEllipticParam(vn,pTsaturation,0.) ;
//
// Set Direct Flow properties	
    pp->SetDirectedParam(vn,1.0,0.) ;
    pm->SetDirectedParam(vn,1.0,0.) ;
    p0->SetDirectedParam(vn,1.0,0.) ;
    pr->SetDirectedParam(vn,1.0,0.) ;
    ne->SetDirectedParam(vn,1.0,0.) ;
    ks->SetDirectedParam(vn,1.0,0.) ;
    kl->SetDirectedParam(vn,1.0,0.) ;
    kp->SetDirectedParam(vn,1.0,0.) ;
    km->SetDirectedParam(vn,1.0,0.) ;
//
// Add particles to the list
    gener->AddParticleType(pp) ;
    gener->AddParticleType(pm) ;
    gener->AddParticleType(p0) ;
    gener->AddParticleType(pr) ;
    gener->AddParticleType(ne) ;
    gener->AddParticleType(ks) ;
    gener->AddParticleType(kl) ;
    gener->AddParticleType(kp) ;
    gener->AddParticleType(km) ;
//	
// Random Ev.Plane ----------------------------------
    TF1 *rpa = new TF1("gevsimPsiRndm","1", 0, 360);
// --------------------------------------------------
    gener->SetPtRange(0., 9.) ; // Use a resonable range! (used for bin size in numerical integration)
    gener->SetPhiRange(0, 360);
    //
    // Set pseudorapidity range 
    Float_t thmin = EtaToTheta(+etamax);   
    Float_t thmax = EtaToTheta(-etamax);   
    gener->SetThetaRange(thmin,thmax);     
    return gener;
}


void ProcessEnvironmentVars()
{
    // Run type
    if (gSystem->Getenv("CONFIG_RUN_TYPE")) {
      for (Int_t iRun = 0; iRun < kRunMax; iRun++) {
	if (strcmp(gSystem->Getenv("CONFIG_RUN_TYPE"), pprRunName[iRun])==0) {
	  srun = (PprRun_t)iRun;
	  cout<<"Run type set to "<<pprRunName[iRun]<<endl;
	}
      }
    }

    // Random Number seed
    if (gSystem->Getenv("CONFIG_SEED")) {
      sseed = atoi(gSystem->Getenv("CONFIG_SEED"));
    }
}


void LoadPythia()
{
    // Load Pythia related libraries
    gSystem->Load("liblhapdf.so");      // Parton density functions
    gSystem->Load("libEGPythia6.so");   // TGenerator interface
    gSystem->Load("libpythia6.so");     // Pythia
    gSystem->Load("libAliPythia6.so");  // ALICE specific implementations
}