[u/mrichter/AliRoot.git] / macros / Config_AliGenCosmicsParam.C

// One can use the configuration macro in compiled mode by
// root [0] gSystem->Load("libgeant321");
// root [0] gSystem->SetIncludePath("-I$ROOTSYS/include -I$ALICE_ROOT/include\
//                   -I$ALICE_ROOT -I$ALICE/geant3/TGeant3");
// root [0] .x grun.C(1,"Config.C++")

#if !defined(__CINT__) || defined(__MAKECINT__)
#include <Riostream.h>
#include <TRandom.h>
#include <TSystem.h>
#include <TVirtualMC.h>
#include <TGeant3TGeo.h>
#include "STEER/AliRunLoader.h"
#include "STEER/AliRun.h"
#include "STEER/AliConfig.h"
#include "PYTHIA6/AliDecayerPythia.h"
#include "EVGEN/AliGenCocktail.h"
#include "EVGEN/AliGenCosmicsParam.h"
#include "EVGEN/AliGenHIJINGpara.h"
#include "STEER/AliMagFMaps.h"
#include "STRUCT/AliBODY.h"
#include "STRUCT/AliMAG.h"
#include "STRUCT/AliABSOv0.h"
#include "STRUCT/AliDIPOv2.h"
#include "STRUCT/AliHALL.h"
#include "STRUCT/AliFRAMEv2.h"
#include "STRUCT/AliSHILv2.h"
#include "STRUCT/AliPIPEv0.h"
#include "ITS/AliITSvPPRasymmFMD.h"
#include "TPC/AliTPCv2.h"
#include "TOF/AliTOFv5T0.h"
#include "RICH/AliRICHv1.h"
#include "ZDC/AliZDCv2.h"
#include "TRD/AliTRDv1.h"
#include "FMD/AliFMDv1.h"
#include "MUON/AliMUONv1.h"
#include "PHOS/AliPHOSv1.h"
#include "PMD/AliPMDv1.h"
#include "START/AliSTARTv1.h"
#include "EMCAL/AliEMCALv2.h"
#include "ACORDE/AliACORDEv0.h"
#include "VZERO/AliVZEROv7.h"
#endif

//--- Magnetic Field ---
enum Mag_t
{
    k2kG, k4kG, k5kG
};

Float_t EtaToTheta(Float_t arg);

static Mag_t         mag      = k5kG; 

void Config()
{
    // ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
    // Theta range given through pseudorapidity limits 22/6/2001

    // Set Random Number seed
  TDatime dt;
  UInt_t curtime=dt.Get();
  UInt_t procid=gSystem->GetPid();
  UInt_t seed=curtime-procid;
  if (gSystem->Getenv("envevno")) {
    seed=atoi(gSystem->Getenv("envevno"));
    seed += 1000; // 0 e' il seed dall'orologio....
    printf("...taking seed as event number + 1000...\n");
  }
  printf("...setting seed as %d...\n",seed);
  gRandom->SetSeed(seed);
  printf("Seed for random number generation = %d \n",gRandom->GetSeed());


  //  AliLog::Message(AliLog::kInfo, Form("Seed for random number generation = %d",gRandom->GetSeed()), "Config.C", "Config.C", "Config()","Config.C", __LINE__);


   // libraries required by geant321
#if defined(__CINT__)
    gSystem->Load("libgeant321");
#endif

    new     TGeant3TGeo("C++ Interface to Geant3");

    if(!AliCDBManager::Instance()->IsDefaultStorageSet()){
      AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT");
      AliCDBManager::Instance()->SetRun(0);
    }

    AliRunLoader* rl=0x0;

    AliLog::Message(AliLog::kInfo, "Creating Run Loader", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);

    rl = AliRunLoader::Open("galice.root",
			    AliConfig::GetDefaultEventFolderName(),
			    "recreate");
    if (rl == 0x0)
      {
	gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
	return;
      }
    rl->SetCompressionLevel(2);
    rl->SetNumberOfEventsPerFile(1000);
    gAlice->SetRunLoader(rl);
    // gAlice->SetGeometryFromFile("geometry.root");
    // gAlice->SetGeometryFromCDB();

    // Set the trigger configuration
    //    gAlice->SetTriggerDescriptor("Pb-Pb");
    gAlice->SetTriggerDescriptor("ACORDE");
    cout<<"Trigger configuration is set to  ACORDE"<<endl;

    //
    // Set External decayer
    TVirtualMCDecayer *decayer = new AliDecayerPythia();

    decayer->SetForceDecay(kAll);
    decayer->Init();
    gMC->SetExternalDecayer(decayer);
    //=======================================================================
    // ************* STEERING parameters FOR ALICE SIMULATION **************
    // --- Specify event type to be tracked through the ALICE setup
    // --- All positions are in cm, angles in degrees, and P and E in GeV


    gMC->SetProcess("DCAY",1);
    gMC->SetProcess("PAIR",1);
    gMC->SetProcess("COMP",1);
    gMC->SetProcess("PHOT",1);
    gMC->SetProcess("PFIS",0);
    gMC->SetProcess("DRAY",0);
    gMC->SetProcess("ANNI",1);
    gMC->SetProcess("BREM",1);
    gMC->SetProcess("MUNU",1);
    gMC->SetProcess("CKOV",1);
    gMC->SetProcess("HADR",1);
    gMC->SetProcess("LOSS",2);
    gMC->SetProcess("MULS",1);
    gMC->SetProcess("RAYL",1);

    Float_t cut = 1.e-3;        // 1MeV cut by default
    Float_t tofmax = 1.e10;

    gMC->SetCut("CUTGAM", cut);
    gMC->SetCut("CUTELE", cut);
    gMC->SetCut("CUTNEU", cut);
    gMC->SetCut("CUTHAD", cut);
    gMC->SetCut("CUTMUO", cut);
    gMC->SetCut("BCUTE",  cut); 
    gMC->SetCut("BCUTM",  cut); 
    gMC->SetCut("DCUTE",  cut); 
    gMC->SetCut("DCUTM",  cut); 
    gMC->SetCut("PPCUTM", cut);
    gMC->SetCut("TOFMAX", tofmax); 


    //  AliGenCosmicsParam
    AliGenCosmicsParam *gener = new AliGenCosmicsParam();
    gener->SetParamACORDE();
    gener->SetYOrigin(260.); // warning: just above TPC, no TOF, no ACORDE
    gener->SetMomentumRange(8.,1000.);
    gener->SetMaxAngleWRTVertical(3.1415/4.);
    gener->SetInSPDinner(); // "acceptance trigger"
    gener->SetBkG(0.); // needed for "acceptance trigger"
    gener->Init();
    gGener = gener;

    // MAGNETIC FIELD IN THE BARREL
    // AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 1., 10., mag); // FIELD
        AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 0., 10., mag); // NO FIELD
    field->SetL3ConstField(0); //Using const. field in the barrel
    rl->CdGAFile();
    gAlice->SetField(field);    


    Int_t   iABSO  =  1;
    Int_t   iDIPO  =  0;
    Int_t   iFMD   =  0;
    Int_t   iFRAME =  1;
    Int_t   iHALL  =  1;
    Int_t   iITS   =  1;
    Int_t   iMAG   =  1;
    Int_t   iMUON  =  0;
    Int_t   iPHOS  =  0;
    Int_t   iPIPE  =  1;
    Int_t   iPMD   =  0;
    Int_t   iRICH  =  0;
    Int_t   iSHIL  =  1;
    Int_t   iSTART =  0;
    Int_t   iTOF   =  0;
    Int_t   iTPC   =  1;
    Int_t   iTRD   =  0;
    Int_t   iZDC   =  0;
    Int_t   iEMCAL =  0;
    Int_t   iACORDE   =  1;
    Int_t   iVZERO =  0;
    rl->CdGAFile();
    //=================== Alice BODY parameters =============================
    AliBODY *BODY = new AliBODY("BODY", "Alice envelop");

    if (iMAG)
    {
        //=================== MAG parameters ============================
        // --- Start with Magnet since detector layouts may be depending ---
        // --- on the selected Magnet dimensions ---
        AliMAG *MAG = new AliMAG("MAG", "Magnet");
    }


    if (iABSO)
    {
        //=================== ABSO parameters ============================
        AliABSO *ABSO = new AliABSOv0("ABSO", "Muon Absorber");
    }

    if (iDIPO)
    {
        //=================== DIPO parameters ============================

        AliDIPO *DIPO = new AliDIPOv2("DIPO", "Dipole version 2");
    }

    if (iHALL)
    {
        //=================== HALL parameters ============================

        AliHALL *HALL = new AliHALL("HALL", "Alice Hall");
    }


    if (iFRAME)
    {
        //=================== FRAME parameters ============================

        AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
    }

    if (iSHIL)
    {
        //=================== SHIL parameters ============================

        AliSHIL *SHIL = new AliSHILv2("SHIL", "Shielding Version 2");
    }


    if (iPIPE)
    {
        //=================== PIPE parameters ============================

        AliPIPE *PIPE = new AliPIPEv0("PIPE", "Beam Pipe");
    }
 
    if(iITS) {

    //=================== ITS parameters ============================
    //
    // As the innermost detector in ALICE, the Inner Tracking System "impacts" on
    // almost all other detectors. This involves the fact that the ITS geometry
    // still has several options to be followed in parallel in order to determine
    // the best set-up which minimizes the induced background. All the geometries
    // available to date are described in the following. Read carefully the comments
    // and use the default version (the only one uncommented) unless you are making
    // comparisons and you know what you are doing. In this case just uncomment the
    // ITS geometry you want to use and run Aliroot.
    //
    // Detailed geometries:         
    //
    //
    //
	AliITSvPPRasymmFMD *ITS  = new AliITSvPPRasymmFMD("ITS","ITS PPR detailed version with asymmetric services");
	ITS->SetMinorVersion(2);  // don't touch this parameter if you're not an ITS developer
	ITS->SetReadDet(kFALSE);	  // don't touch this parameter if you're not an ITS developer
	//    ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
	ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [100,300]
	ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [100,300]
	ITS->SetThicknessChip1(150.);  // chip thickness on layer 1 must be in the range [150,300]
	ITS->SetThicknessChip2(150.);  // chip thickness on layer 2 must be in the range [150,300]
	ITS->SetRails(0);	       // 1 --> rails in ; 0 --> rails out
	ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon

 
    //
    // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful 
    // for reconstruction !):
    //                                                     
    //
    //AliITSvPPRcoarseasymm *ITS  = new AliITSvPPRcoarseasymm("ITS","New ITS PPR coarse version with asymmetric services");
    //ITS->SetRails(0);                // 1 --> rails in ; 0 --> rails out
    //ITS->SetSupportMaterial(0);      // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
    //
    //AliITS *ITS  = new AliITSvPPRcoarsesymm("ITS","New ITS PPR coarse version with symmetric services");
    //ITS->SetRails(0);                // 1 --> rails in ; 0 --> rails out
    //ITS->SetSupportMaterial(0);      // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
    //                      
    //
    //
    // Geant3 <-> EUCLID conversion
    // ============================
    //
    // SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and
    // media to two ASCII files (called by default ITSgeometry.euc and
    // ITSgeometry.tme) in a format understandable to the CAD system EUCLID.
    // The default (=0) means that you dont want to use this facility.
    //
     ITS->SetEUCLID(0);  
    }

    if (iTPC)
    {
        //============================ TPC parameters ===================
        AliTPC *TPC = new AliTPCv2("TPC", "Default");
    }


    if (iTOF) {
        //=================== TOF parameters ============================
	AliTOF *TOF = new AliTOFv5T0("TOF", "normal TOF");
    }


    if (iRICH)
    {
        //=================== RICH parameters ===========================
        AliRICH *RICH = new AliRICHv1("RICH", "normal RICH");

    }


    if (iZDC)
    {
        //=================== ZDC parameters ============================

        AliZDC *ZDC = new AliZDCv2("ZDC", "normal ZDC");
    }

    if (iTRD)
    {
        //=================== TRD parameters ============================

        AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
    }

    if (iFMD)
    {
        //=================== FMD parameters ============================
	AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
   }

    if (iMUON)
    {
        //=================== MUON parameters ===========================
        // New MUONv1 version (geometry defined via builders)
        AliMUON *MUON = new AliMUONv1("MUON", "default");
    }
    //=================== PHOS parameters ===========================

    if (iPHOS)
    {
        AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
    }


    if (iPMD)
    {
        //=================== PMD parameters ============================
        AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
    }

    if (iSTART)
    {
        //=================== START parameters ============================
        AliSTART *START = new AliSTARTv1("START", "START Detector");
    }

    if (iEMCAL)
    {
        //=================== EMCAL parameters ============================
        AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "SHISH_77_TRD1_2X2_FINAL_110DEG");
    }

     if (iACORDE)
    {
        //=================== ACORDE parameters ============================
        AliACORDE *ACORDE = new AliACORDEv0("ACORDE", "normal ACORDE");
    }

     if (iVZERO)
    {
        //=================== ACORDE parameters ============================
        AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
    }

     AliLog::Message(AliLog::kInfo, "End of Config", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);

}

Float_t EtaToTheta(Float_t arg){
  return (180./TMath::Pi())*2.*atan(exp(-arg));
}
Commit	Line	Data
1c1b79ed	1	// One can use the configuration macro in compiled mode by
	2	// root [0] gSystem->Load("libgeant321");
	3	// root [0] gSystem->SetIncludePath("-I$ROOTSYS/include -I$ALICE_ROOT/include\
	4	// -I$ALICE_ROOT -I$ALICE/geant3/TGeant3");
	5	// root [0] .x grun.C(1,"Config.C++")
	6
	7	#if !defined(__CINT__) \|\| defined(__MAKECINT__)
	8	#include <Riostream.h>
	9	#include <TRandom.h>
	10	#include <TSystem.h>
	11	#include <TVirtualMC.h>
	12	#include <TGeant3TGeo.h>
	13	#include "STEER/AliRunLoader.h"
	14	#include "STEER/AliRun.h"
	15	#include "STEER/AliConfig.h"
	16	#include "PYTHIA6/AliDecayerPythia.h"
	17	#include "EVGEN/AliGenCocktail.h"
	18	#include "EVGEN/AliGenCosmicsParam.h"
	19	#include "EVGEN/AliGenHIJINGpara.h"
	20	#include "STEER/AliMagFMaps.h"
	21	#include "STRUCT/AliBODY.h"
	22	#include "STRUCT/AliMAG.h"
	23	#include "STRUCT/AliABSOv0.h"
	24	#include "STRUCT/AliDIPOv2.h"
	25	#include "STRUCT/AliHALL.h"
	26	#include "STRUCT/AliFRAMEv2.h"
	27	#include "STRUCT/AliSHILv2.h"
	28	#include "STRUCT/AliPIPEv0.h"
	29	#include "ITS/AliITSvPPRasymmFMD.h"
	30	#include "TPC/AliTPCv2.h"
	31	#include "TOF/AliTOFv5T0.h"
	32	#include "RICH/AliRICHv1.h"
	33	#include "ZDC/AliZDCv2.h"
	34	#include "TRD/AliTRDv1.h"
	35	#include "FMD/AliFMDv1.h"
	36	#include "MUON/AliMUONv1.h"
	37	#include "PHOS/AliPHOSv1.h"
	38	#include "PMD/AliPMDv1.h"
	39	#include "START/AliSTARTv1.h"
	40	#include "EMCAL/AliEMCALv2.h"
	41	#include "ACORDE/AliACORDEv0.h"
	42	#include "VZERO/AliVZEROv7.h"
	43	#endif
	44
	45	//--- Magnetic Field ---
	46	enum Mag_t
	47	{
	48	k2kG, k4kG, k5kG
	49	};
	50
	51	Float_t EtaToTheta(Float_t arg);
	52
	53	static Mag_t mag = k5kG;
	54
	55	void Config()
	56	{
	57	// ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
	58	// Theta range given through pseudorapidity limits 22/6/2001
	59
	60	// Set Random Number seed
	61	TDatime dt;
	62	UInt_t curtime=dt.Get();
	63	UInt_t procid=gSystem->GetPid();
	64	UInt_t seed=curtime-procid;
65	if (gSystem->Getenv("envevno")) {
66	seed=atoi(gSystem->Getenv("envevno"));
67	seed += 1000; // 0 e' il seed dall'orologio....
68	printf("...taking seed as event number + 1000...\n");
69	}
70	printf("...setting seed as %d...\n",seed);
71	gRandom->SetSeed(seed);
72	printf("Seed for random number generation = %d \n",gRandom->GetSeed());
73
74
75	// AliLog::Message(AliLog::kInfo, Form("Seed for random number generation = %d",gRandom->GetSeed()), "Config.C", "Config.C", "Config()","Config.C", __LINE__);
76
77
78	// libraries required by geant321
79	#if defined(__CINT__)
80	gSystem->Load("libgeant321");
81	#endif
82
83	new TGeant3TGeo("C++ Interface to Geant3");
84
458041af	85	if(!AliCDBManager::Instance()->IsDefaultStorageSet()){
	86	AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT");
	87	AliCDBManager::Instance()->SetRun(0);
	88	}
	89
1c1b79ed	90	AliRunLoader* rl=0x0;
	91
	92	AliLog::Message(AliLog::kInfo, "Creating Run Loader", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);
	93
	94	rl = AliRunLoader::Open("galice.root",
	95	AliConfig::GetDefaultEventFolderName(),
	96	"recreate");
	97	if (rl == 0x0)
	98	{
	99	gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
	100	return;
	101	}
	102	rl->SetCompressionLevel(2);
	103	rl->SetNumberOfEventsPerFile(1000);
	104	gAlice->SetRunLoader(rl);
458041af	105	// gAlice->SetGeometryFromFile("geometry.root");
458041af	106	// gAlice->SetGeometryFromCDB();
1c1b79ed	107
	108	// Set the trigger configuration
	109	// gAlice->SetTriggerDescriptor("Pb-Pb");
	110	gAlice->SetTriggerDescriptor("ACORDE");
	111	cout<<"Trigger configuration is set to ACORDE"<<endl;
	112
	113	//
	114	// Set External decayer
	115	TVirtualMCDecayer *decayer = new AliDecayerPythia();
	116
	117	decayer->SetForceDecay(kAll);
	118	decayer->Init();
	119	gMC->SetExternalDecayer(decayer);
	120	//=======================================================================
	121	// *********** STEERING parameters FOR ALICE SIMULATION ************
	122	// --- Specify event type to be tracked through the ALICE setup
	123	// --- All positions are in cm, angles in degrees, and P and E in GeV
	124
	125
	126	gMC->SetProcess("DCAY",1);
	127	gMC->SetProcess("PAIR",1);
	128	gMC->SetProcess("COMP",1);
	129	gMC->SetProcess("PHOT",1);
	130	gMC->SetProcess("PFIS",0);
	131	gMC->SetProcess("DRAY",0);
	132	gMC->SetProcess("ANNI",1);
	133	gMC->SetProcess("BREM",1);
	134	gMC->SetProcess("MUNU",1);
	135	gMC->SetProcess("CKOV",1);
	136	gMC->SetProcess("HADR",1);
	137	gMC->SetProcess("LOSS",2);
	138	gMC->SetProcess("MULS",1);
	139	gMC->SetProcess("RAYL",1);
	140
	141	Float_t cut = 1.e-3; // 1MeV cut by default
	142	Float_t tofmax = 1.e10;
	143
	144	gMC->SetCut("CUTGAM", cut);
	145	gMC->SetCut("CUTELE", cut);
	146	gMC->SetCut("CUTNEU", cut);
	147	gMC->SetCut("CUTHAD", cut);
	148	gMC->SetCut("CUTMUO", cut);
	149	gMC->SetCut("BCUTE", cut);
	150	gMC->SetCut("BCUTM", cut);
	151	gMC->SetCut("DCUTE", cut);
	152	gMC->SetCut("DCUTM", cut);
	153	gMC->SetCut("PPCUTM", cut);
	154	gMC->SetCut("TOFMAX", tofmax);
	155
	156
	157	// AliGenCosmicsParam
	158	AliGenCosmicsParam *gener = new AliGenCosmicsParam();
	159	gener->SetParamACORDE();
	160	gener->SetYOrigin(260.); // warning: just above TPC, no TOF, no ACORDE
	161	gener->SetMomentumRange(8.,1000.);
	162	gener->SetMaxAngleWRTVertical(3.1415/4.);
	163	gener->SetInSPDinner(); // "acceptance trigger"
	164	gener->SetBkG(0.); // needed for "acceptance trigger"
	165	gener->Init();
	166	gGener = gener;
	167
	168	// MAGNETIC FIELD IN THE BARREL
	169	// AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 1., 10., mag); // FIELD
	170	AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 0., 10., mag); // NO FIELD
171	field->SetL3ConstField(0); //Using const. field in the barrel
172	rl->CdGAFile();
173	gAlice->SetField(field);
174
175
176	Int_t iABSO = 1;
177	Int_t iDIPO = 0;
178	Int_t iFMD = 0;
179	Int_t iFRAME = 1;
180	Int_t iHALL = 1;
181	Int_t iITS = 1;
182	Int_t iMAG = 1;
183	Int_t iMUON = 0;
184	Int_t iPHOS = 0;
185	Int_t iPIPE = 1;
186	Int_t iPMD = 0;
187	Int_t iRICH = 0;
188	Int_t iSHIL = 1;
189	Int_t iSTART = 0;
190	Int_t iTOF = 0;
191	Int_t iTPC = 1;
192	Int_t iTRD = 0;
193	Int_t iZDC = 0;
194	Int_t iEMCAL = 0;
195	Int_t iACORDE = 1;
196	Int_t iVZERO = 0;
197	rl->CdGAFile();
198	//=================== Alice BODY parameters =============================
199	AliBODY *BODY = new AliBODY("BODY", "Alice envelop");
200
201	if (iMAG)
202	{
203	//=================== MAG parameters ============================
204	// --- Start with Magnet since detector layouts may be depending ---
205	// --- on the selected Magnet dimensions ---
206	AliMAG *MAG = new AliMAG("MAG", "Magnet");
207	}
208
209
210	if (iABSO)
211	{
212	//=================== ABSO parameters ============================
213	AliABSO *ABSO = new AliABSOv0("ABSO", "Muon Absorber");
214	}
215
216	if (iDIPO)
217	{
218	//=================== DIPO parameters ============================
219
220	AliDIPO *DIPO = new AliDIPOv2("DIPO", "Dipole version 2");
221	}
222
223	if (iHALL)
224	{
225	//=================== HALL parameters ============================
226
227	AliHALL *HALL = new AliHALL("HALL", "Alice Hall");
228	}
229
230
231	if (iFRAME)
232	{
233	//=================== FRAME parameters ============================
234
235	AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
236	}
237
238	if (iSHIL)
239	{
240	//=================== SHIL parameters ============================
241
242	AliSHIL *SHIL = new AliSHILv2("SHIL", "Shielding Version 2");
243	}
244
245
246	if (iPIPE)
247	{
248	//=================== PIPE parameters ============================
249
250	AliPIPE *PIPE = new AliPIPEv0("PIPE", "Beam Pipe");
251	}
252
253	if(iITS) {
254
255	//=================== ITS parameters ============================
256	//
257	// As the innermost detector in ALICE, the Inner Tracking System "impacts" on
258	// almost all other detectors. This involves the fact that the ITS geometry
259	// still has several options to be followed in parallel in order to determine
260	// the best set-up which minimizes the induced background. All the geometries
261	// available to date are described in the following. Read carefully the comments
262	// and use the default version (the only one uncommented) unless you are making
263	// comparisons and you know what you are doing. In this case just uncomment the
264	// ITS geometry you want to use and run Aliroot.
265	//
266	// Detailed geometries:
267	//
268	//
269	//
270	AliITSvPPRasymmFMD *ITS = new AliITSvPPRasymmFMD("ITS","ITS PPR detailed version with asymmetric services");
271	ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
272	ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
273	// ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det"); // don't touch this parameter if you're not an ITS developer
274	ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
275	ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
276	ITS->SetThicknessChip1(150.); // chip thickness on layer 1 must be in the range [150,300]
277	ITS->SetThicknessChip2(150.); // chip thickness on layer 2 must be in the range [150,300]
278	ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
279	ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
280
281
282	//
283	// Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful
284	// for reconstruction !):
285	//
286	//
287	//AliITSvPPRcoarseasymm *ITS = new AliITSvPPRcoarseasymm("ITS","New ITS PPR coarse version with asymmetric services");
288	//ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
289	//ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
290	//
291	//AliITS *ITS = new AliITSvPPRcoarsesymm("ITS","New ITS PPR coarse version with symmetric services");
292	//ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
293	//ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
294	//
295	//
296	//
297	// Geant3 <-> EUCLID conversion
298	// ============================
299	//
300	// SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and
301	// media to two ASCII files (called by default ITSgeometry.euc and
302	// ITSgeometry.tme) in a format understandable to the CAD system EUCLID.
303	// The default (=0) means that you dont want to use this facility.
304	//
305	ITS->SetEUCLID(0);
306	}
307
308	if (iTPC)
309	{
310	//============================ TPC parameters ===================
311	AliTPC *TPC = new AliTPCv2("TPC", "Default");
312	}
313
314
315	if (iTOF) {
316	//=================== TOF parameters ============================
317	AliTOF *TOF = new AliTOFv5T0("TOF", "normal TOF");
318	}
319
320
321	if (iRICH)
322	{
323	//=================== RICH parameters ===========================
324	AliRICH *RICH = new AliRICHv1("RICH", "normal RICH");
325
326	}
327
328
329	if (iZDC)
330	{
331	//=================== ZDC parameters ============================
332
333	AliZDC *ZDC = new AliZDCv2("ZDC", "normal ZDC");
334	}
335
336	if (iTRD)
337	{
338	//=================== TRD parameters ============================
339
340	AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
341	}
342
343	if (iFMD)
344	{
345	//=================== FMD parameters ============================
346	AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
347	}
348
349	if (iMUON)
350	{
351	//=================== MUON parameters ===========================
352	// New MUONv1 version (geometry defined via builders)
353	AliMUON *MUON = new AliMUONv1("MUON", "default");
354	}
355	//=================== PHOS parameters ===========================
356
357	if (iPHOS)
358	{
359	AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
360	}
361
362
363	if (iPMD)
364	{
365	//=================== PMD parameters ============================
366	AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
367	}
368
369	if (iSTART)
370	{
371	//=================== START parameters ============================
372	AliSTART *START = new AliSTARTv1("START", "START Detector");
373	}
374
375	if (iEMCAL)
376	{
377	//=================== EMCAL parameters ============================
378	AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "SHISH_77_TRD1_2X2_FINAL_110DEG");
379	}
380
381	if (iACORDE)
382	{
383	//=================== ACORDE parameters ============================
384	AliACORDE *ACORDE = new AliACORDEv0("ACORDE", "normal ACORDE");
385	}
386
387	if (iVZERO)
388	{
389	//=================== ACORDE parameters ============================
390	AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
391	}
392
393	AliLog::Message(AliLog::kInfo, "End of Config", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);
394
395	}
396
397	Float_t EtaToTheta(Float_t arg){
398	return (180./TMath::Pi())2.atan(exp(-arg));
399	}