| | 1 | /*************************************************************************** |
| | 2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * |
| | 3 | * * |
| | 4 | * Author: The ALICE Off-line Project. * |
| | 5 | * Contributors are mentioned in the code where appropriate. * |
| | 6 | * * |
| | 7 | * Permission to use, copy, modify and distribute this software and its * |
| | 8 | * documentation strictly for non-commercial purposes is hereby granted * |
| | 9 | * without fee, provided that the above copyright notice appears in all * |
| | 10 | * copies and that both the copyright notice and this permission notice * |
| | 11 | * appear in the supporting documentation. The authors make no claims * |
| | 12 | * about the suitability of this software for any purpose. It is * |
| | 13 | * provided "as is" without express or implied warranty. * |
| | 14 | **************************************************************************/ |
| | 15 | /* $Id$ */ |
| | 16 | |
| | 17 | // |
| | 18 | /////////////////////////////////////////////////////////////////////////////// |
| | 19 | // // |
| | 20 | // Photon Multiplicity Detector Version 1 // |
| | 21 | // Bedanga Mohanty : February 14th 2006 |
| | 22 | // // |
| | 23 | //Begin_Html |
| | 24 | /* |
| | 25 | <img src="picts/AliPMDv1Class.gif"> |
| | 26 | */ |
| | 27 | //End_Html |
| | 28 | // // |
| | 29 | /////////////////////////////////////////////////////////////////////////////// |
| | 30 | //// |
| | 31 | |
| | 32 | #include "Riostream.h" |
| | 33 | #include <TVirtualMC.h> |
| | 34 | |
| | 35 | #include "AliConst.h" |
| | 36 | #include "AliLog.h" |
| | 37 | #include "AliMC.h" |
| | 38 | #include "AliMagF.h" |
| | 39 | #include "AliPMDv1.h" |
| | 40 | #include "AliRun.h" |
| | 41 | |
| | 42 | const Int_t AliPMDv1::fgkNcolUM1 = 48; // Number of cols in UM, type 1 |
| | 43 | const Int_t AliPMDv1::fgkNcolUM2 = 96; // Number of cols in UM, type 2 |
| | 44 | const Int_t AliPMDv1::fgkNrowUM1 = 96; // Number of rows in UM, type 1 |
| | 45 | const Int_t AliPMDv1::fgkNrowUM2 = 48; // Number of rows in UM, type 2 |
| | 46 | const Float_t AliPMDv1::fgkCellRadius = 0.25; // Radius of a hexagonal cell |
| | 47 | const Float_t AliPMDv1::fgkCellWall = 0.02; // Thickness of cell Wall |
| | 48 | const Float_t AliPMDv1::fgkCellDepth = 0.50; // Gas thickness |
| | 49 | const Float_t AliPMDv1::fgkThBase = 0.2; // Thickness of Base plate |
| | 50 | const Float_t AliPMDv1::fgkThBKP = 0.1; // Thickness of Back plane |
| | 51 | const Float_t AliPMDv1::fgkThAir = 1.03; // Thickness of Air |
| | 52 | const Float_t AliPMDv1::fgkThPCB = 0.16; // Thickness of PCB |
| | 53 | const Float_t AliPMDv1::fgkThLead = 1.5; // Thickness of Pb |
| | 54 | const Float_t AliPMDv1::fgkThSteel = 0.5; // Thickness of Steel |
| | 55 | const Float_t AliPMDv1::fgkGap = 0.025; // Air Gap |
| | 56 | const Float_t AliPMDv1::fgkZdist = 361.5; // z-position of the detector |
| | 57 | const Float_t AliPMDv1::fgkSqroot3 = 1.7320508;// Square Root of 3 |
| | 58 | const Float_t AliPMDv1::fgkSqroot3by2 = 0.8660254;// Square Root of 3 by 2 |
| | 59 | const Float_t AliPMDv1::fgkSSBoundary = 0.3; |
| | 60 | const Float_t AliPMDv1::fgkThSS = 1.03; |
| | 61 | const Float_t AliPMDv1::fgkThG10 = 1.03; |
| | 62 | ClassImp(AliPMDv1) |
| | 63 | |
| | 64 | //_____________________________________________________________________________ |
| | 65 | AliPMDv1::AliPMDv1() |
| | 66 | { |
| | 67 | // |
| | 68 | // Default constructor |
| | 69 | // |
| | 70 | fMedSens=0; |
| | 71 | } |
| | 72 | |
| | 73 | //_____________________________________________________________________________ |
| | 74 | AliPMDv1::AliPMDv1(const char *name, const char *title) |
| | 75 | : AliPMD(name,title) |
| | 76 | { |
| | 77 | // |
| | 78 | // Standard constructor |
| | 79 | // |
| | 80 | fMedSens=0; |
| | 81 | } |
| | 82 | |
| | 83 | //_____________________________________________________________________________ |
| | 84 | void AliPMDv1::CreateGeometry() |
| | 85 | { |
| | 86 | // Create geometry for Photon Multiplicity Detector |
| | 87 | |
| | 88 | GetParameters(); |
| | 89 | CreateSupermodule(); |
| | 90 | CreatePMD(); |
| | 91 | } |
| | 92 | |
| | 93 | //_____________________________________________________________________________ |
| | 94 | void AliPMDv1::CreateSupermodule() |
| | 95 | { |
| | 96 | // |
| | 97 | // Creates the geometry of the cells of PMD, places them in supermodule |
| | 98 | // which is a rectangular object. |
| | 99 | // Basic unit is ECAR, a hexagonal cell made of Ar+CO2, which is |
| | 100 | // placed inside another hexagonal cell made of Cu (ECCU) with larger |
| | 101 | // radius, compared to ECAR. The difference in radius gives the dimension |
| | 102 | // of half width of each cell wall. |
| | 103 | // These cells are placed in a rectangular strip which are of 2 types |
| | 104 | // EST1 and EST2 |
| | 105 | // 2 types of unit modules are made EUM1 and EUM2 which contains these strips |
| | 106 | // placed repeatedly |
| | 107 | // Each supermodule (ESMA, ESMB), made of G10 is filled with following |
| | 108 | //components. They have 6 unit moudles inside them |
| | 109 | // ESMA, ESMB are placed in EPMD along with EMPB (Pb converter) |
| | 110 | // and EMFE (iron support) |
| | 111 | |
| | 112 | |
| | 113 | Int_t i,j; |
| | 114 | Int_t number; |
| | 115 | Int_t ihrotm,irotdm; |
| | 116 | Float_t xb, yb, zb; |
| | 117 | |
| | 118 | Int_t *idtmed = fIdtmed->GetArray()-599; |
| | 119 | |
| | 120 | AliMatrix(ihrotm, 90., 30., 90., 120., 0., 0.); |
| | 121 | AliMatrix(irotdm, 90., 180., 90., 270., 180., 0.); |
| | 122 | |
| | 123 | // STEP - I |
| | 124 | //******************************************************// |
| | 125 | // First create the sensitive medium of a hexagon cell (ECAR) |
| | 126 | // Inner hexagon filled with gas (Ar+CO2) |
| | 127 | |
| | 128 | Float_t hexd2[10] = {0.,360.,6,2,-0.25,0.,0.23,0.25,0.,0.23}; |
| | 129 | hexd2[4] = -fgkCellDepth/2.; |
| | 130 | hexd2[7] = fgkCellDepth/2.; |
| | 131 | hexd2[6] = fgkCellRadius - fgkCellWall; |
| | 132 | hexd2[9] = fgkCellRadius - fgkCellWall; |
| | 133 | |
| | 134 | gMC->Gsvolu("ECAR", "PGON", idtmed[604], hexd2,10); |
| | 135 | gMC->Gsatt("ECAR", "SEEN", 0); |
| | 136 | //******************************************************// |
| | 137 | |
| | 138 | // STEP - II |
| | 139 | //******************************************************// |
| | 140 | // Place the sensitive medium inside a hexagon copper cell (ECCU) |
| | 141 | // Outer hexagon made of Copper |
| | 142 | |
| | 143 | Float_t hexd1[10] = {0.,360.,6,2,-0.25,0.,0.25,0.25,0.,0.25}; |
| | 144 | hexd1[4] = -fgkCellDepth/2.; |
| | 145 | hexd1[7] = fgkCellDepth/2.; |
| | 146 | hexd1[6] = fgkCellRadius; |
| | 147 | hexd1[9] = fgkCellRadius; |
| | 148 | |
| | 149 | gMC->Gsvolu("ECCU", "PGON", idtmed[614], hexd1,10); |
| | 150 | gMC->Gsatt("ECCU", "SEEN", 0); |
| | 151 | gMC->Gsatt("ECCU", "COLO", 4); |
| | 152 | |
| | 153 | // Place inner hex (sensitive volume) inside outer hex (copper) |
| | 154 | |
| | 155 | gMC->Gspos("ECAR", 1, "ECCU", 0., 0., 0., 0, "ONLY"); |
| | 156 | //******************************************************// |
| | 157 | |
| | 158 | // STEP - III |
| | 159 | //******************************************************// |
| | 160 | // Now create Rectangular TWO strips (EST1, EST2) |
| | 161 | // of 1 column and 48 or 96 cells length |
| | 162 | |
| | 163 | // volume for first strip EST1 made of AIR |
| | 164 | |
| | 165 | Float_t dbox1[3]; |
| | 166 | dbox1[0] = fgkCellRadius/fgkSqroot3by2; |
| | 167 | dbox1[1] = fgkNrowUM1*fgkCellRadius; |
| | 168 | dbox1[2] = fgkCellDepth/2.; |
| | 169 | |
| | 170 | gMC->Gsvolu("EST1","BOX", idtmed[698], dbox1, 3); |
| | 171 | gMC->Gsatt("EST1", "SEEN", 0); |
| | 172 | |
| | 173 | // volume for second strip EST2 |
| | 174 | |
| | 175 | |
| | 176 | Float_t dbox2[3]; |
| | 177 | dbox2[1] = fgkNrowUM2*fgkCellRadius; |
| | 178 | dbox2[0] = dbox1[0]; |
| | 179 | dbox2[2] = dbox1[2]; |
| | 180 | |
| | 181 | gMC->Gsvolu("EST2","BOX", idtmed[698], dbox2, 3); |
| | 182 | gMC->Gsatt("EST2", "SEEN", 0); |
| | 183 | |
| | 184 | // Place hexagonal cells ECCU placed inside EST1 |
| | 185 | xb = 0.; |
| | 186 | zb = 0.; |
| | 187 | yb = (dbox1[1]) - fgkCellRadius; |
| | 188 | for (i = 1; i <= fgkNrowUM1; ++i) |
| | 189 | { |
| | 190 | number = i; |
| | 191 | gMC->Gspos("ECCU", number, "EST1", xb,yb,zb, 0, "ONLY"); |
| | 192 | yb -= (fgkCellRadius*2.); |
| | 193 | } |
| | 194 | |
| | 195 | // Place hexagonal cells ECCU placed inside EST2 |
| | 196 | xb = 0.; |
| | 197 | zb = 0.; |
| | 198 | yb = (dbox2[1]) - fgkCellRadius; |
| | 199 | for (i = 1; i <= fgkNrowUM2; ++i) |
| | 200 | { |
| | 201 | number = i; |
| | 202 | gMC->Gspos("ECCU", number, "EST2", xb,yb,zb, 0, "ONLY"); |
| | 203 | //PH cout << "ECCU in EST2 ==> " << number << "\t"<<xb << "\t"<<yb <<endl; |
| | 204 | yb -= (fgkCellRadius*2.); |
| | 205 | } |
| | 206 | |
| | 207 | |
| | 208 | //******************************************************// |
| | 209 | |
| | 210 | |
| | 211 | // STEP - IV |
| | 212 | //******************************************************// |
| | 213 | // 2 types of rectangular shaped unit modules EUM1 and EUM2 (defined by BOX) |
| | 214 | //---------------------------------EHC1 Start----------------------// |
| | 215 | // Create EHC1 : The honey combs for a unit module type 1 |
| | 216 | // First step is to create a honey comb unit module. |
| | 217 | // This is named as EHC1, we will lay the EST1 strips of |
| | 218 | // honey comb cells inside it. |
| | 219 | |
| | 220 | //Dimensions of EHC1 |
| | 221 | //X-dimension = Number of columns + cell radius |
| | 222 | //Y-dimension = Number of rows * cell radius/sqrt3by2 - (some factor) |
| | 223 | //Z-dimension = cell depth/2 |
| | 224 | |
| | 225 | Float_t dbox3[3]; |
| | 226 | dbox3[0] = (dbox1[0]*fgkNcolUM1)-(fgkCellRadius*fgkSqroot3*(fgkNcolUM1-1)/6.); |
| | 227 | dbox3[1] = dbox1[1]+fgkCellRadius/2.; |
| | 228 | dbox3[2] = fgkCellDepth/2.; |
| | 229 | |
| | 230 | //Create a BOX, Material AIR |
| | 231 | gMC->Gsvolu("EHC1","BOX", idtmed[698], dbox3, 3); |
| | 232 | gMC->Gsatt("EHC1", "SEEN", 0); |
| | 233 | // Place rectangular strips EST1 inside EHC1 unit module |
| | 234 | xb = dbox3[0]-dbox1[0]; |
| | 235 | |
| | 236 | for (j = 1; j <= fgkNcolUM1; ++j) |
| | 237 | { |
| | 238 | if(j%2 == 0) |
| | 239 | { |
| | 240 | yb = -fgkCellRadius/2.0; |
| | 241 | } |
| | 242 | else |
| | 243 | { |
| | 244 | yb = fgkCellRadius/2.0; |
| | 245 | } |
| | 246 | number = j; |
| | 247 | gMC->Gspos("EST1",number, "EHC1", xb, yb , 0. , 0, "MANY"); |
| | 248 | //The strips are being placed from top towards bottom of the module |
| | 249 | //This is because the first cell in a module in hardware is the top |
| | 250 | //left corner cell |
| | 251 | xb = (dbox3[0]-dbox1[0])-j*fgkCellRadius*fgkSqroot3; |
| | 252 | |
| | 253 | } |
| | 254 | //--------------------EHC1 done----------------------------------// |
| | 255 | |
| | 256 | |
| | 257 | //---------------------------------EHC2 Start----------------------// |
| | 258 | // Create EHC2 : The honey combs for a unit module type 2 |
| | 259 | // First step is to create a honey comb unit module. |
| | 260 | // This is named as EHC2, we will lay the EST2 strips of |
| | 261 | // honey comb cells inside it. |
| | 262 | |
| | 263 | //Dimensions of EHC2 |
| | 264 | //X-dimension = Number of columns + cell radius |
| | 265 | //Y-dimension = Number of rows * cell radius/sqrt3by2 - (some factor) |
| | 266 | //Z-dimension = cell depth/2 |
| | 267 | |
| | 268 | dbox3[0] = (dbox1[0]*fgkNcolUM1)-(fgkCellRadius*fgkSqroot3*(fgkNcolUM1-1)/6.); |
| | 269 | dbox3[1] = dbox1[1]+fgkCellRadius/2.; |
| | 270 | dbox3[2] = fgkCellDepth/2.; |
| | 271 | |
| | 272 | Float_t dbox4[3]; |
| | 273 | |
| | 274 | dbox4[0] =(dbox2[0]*fgkNcolUM2)-(fgkCellRadius*fgkSqroot3*(fgkNcolUM2-1)/6.); |
| | 275 | dbox4[1] = dbox2[1] + fgkCellRadius/2.; |
| | 276 | dbox4[2] = dbox3[2]; |
| | 277 | |
| | 278 | //Create a BOX of AIR |
| | 279 | gMC->Gsvolu("EHC2","BOX", idtmed[698], dbox4, 3); |
| | 280 | gMC->Gsatt("EHC2", "SEEN", 0); |
| | 281 | |
| | 282 | // Place rectangular strips EST2 inside EHC2 unit module |
| | 283 | xb = dbox4[0]-dbox2[0]; |
| | 284 | for (j = 1; j <= fgkNcolUM2; ++j) |
| | 285 | { |
| | 286 | if(j%2 == 0) |
| | 287 | { |
| | 288 | yb = -fgkCellRadius/2.0; |
| | 289 | } |
| | 290 | else |
| | 291 | { |
| | 292 | yb = +fgkCellRadius/2.0; |
| | 293 | } |
| | 294 | number = j; |
| | 295 | gMC->Gspos("EST2",number, "EHC2", xb, yb , 0. ,0, "MANY"); |
| | 296 | xb = (dbox4[0]-dbox2[0])-j*fgkCellRadius*fgkSqroot3; |
| | 297 | } |
| | 298 | |
| | 299 | |
| | 300 | //--------------------EHC2 done----------------------------------// |
| | 301 | |
| | 302 | |
| | 303 | // Now the job is to assmeble an Unit module |
| | 304 | // It will have the following components |
| | 305 | // (a) Base plate of G10 of 0.2 cm |
| | 306 | // (b) Air gap of 0.05 cm |
| | 307 | // (c) Bottom PCB of 0.16 cm G10 |
| | 308 | // (d) Honey comb 0f 0.5 cm |
| | 309 | // (e) Top PCB of 0.16 cm G10 |
| | 310 | // (f) Air gap of 0.16 cm |
| | 311 | // (g) Back Plane of 0.1 cm G10 |
| | 312 | // (h) Then all around then we have an air gap of 0.5mm |
| | 313 | // (i) Then all around 0.5mm thick G10 insulation |
| | 314 | // (h) Then all around Stainless Steel boundary channel 0.3 cm thick |
| | 315 | //Let us first create them one by one |
| | 316 | //---------------------------------------------------// |
| | 317 | |
| | 318 | // ---------------- Lets do it first for UM Type A -----// |
| | 319 | |
| | 320 | //--------------------------------------------------// |
| | 321 | //Bottom and Top PCB : EPCA |
| | 322 | //=========================== |
| | 323 | // Make a 1.6mm thick G10 Bottom and Top PCB for Unit module A |
| | 324 | // X-dimension same as EHC1 - dbox3[0] |
| | 325 | // Y-dimension same as EHC1 - dbox3[1] |
| | 326 | // Z-dimension 0.16/2 = 0.08 cm |
| | 327 | //-------------------------------------------------// |
| | 328 | Float_t dboxPcbA[3]; |
| | 329 | dboxPcbA[0] = dbox3[0]; |
| | 330 | dboxPcbA[1] = dbox3[1]; |
| | 331 | dboxPcbA[2] = fgkThPCB/2.; |
| | 332 | |
| | 333 | //Top and Bottom PCB is a BOX of Material G10 |
| | 334 | gMC->Gsvolu("EPCA","BOX", idtmed[607], dboxPcbA, 3); |
| | 335 | gMC->Gsatt("EPCA", "SEEN", 0); |
| | 336 | //--------------------------------------------------------// |
| | 337 | //Back Plane : EBKA |
| | 338 | //================== |
| | 339 | // Make a 1.0mm thick Back Plane PCB for Unit module A |
| | 340 | // X-dimension same as EHC1 - dbox3[0] |
| | 341 | // Y-dimension same as EHC1 - dbox3[1] |
| | 342 | // Z-dimension 0.1/2 = 0.05 cm |
| | 343 | //------------------------------------------------------// |
| | 344 | Float_t dboxBPlaneA[3]; |
| | 345 | dboxBPlaneA[0] = dbox3[0]; |
| | 346 | dboxBPlaneA[1] = dbox3[1]; |
| | 347 | dboxBPlaneA[2] = fgkThBKP/2.; |
| | 348 | |
| | 349 | //Back PLane PCB of MAterial G10 |
| | 350 | gMC->Gsvolu("EBKA","BOX", idtmed[607], dboxBPlaneA, 3); |
| | 351 | gMC->Gsatt("EBKA", "SEEN", 0); |
| | 352 | //-------------------------------------------------------------// |
| | 353 | |
| | 354 | //---------- That was all in the Z -direction of Unit Module A----// |
| | 355 | |
| | 356 | // Now lets us construct the boundary arround the Unit Module --// |
| | 357 | // This boundary has |
| | 358 | // (a) 0.5 mm X and Y and 10.3 mm Z dimension AIR gap |
| | 359 | // (b) 0.5 mm X and Y and 10.3 mm Z dimension G10 |
| | 360 | // (c) 3.0 mm X and Y and 12.3 mm Z dimension Stainless Steel |
| | 361 | |
| | 362 | |
| | 363 | |
| | 364 | //-------------------------------------------------// |
| | 365 | //AIR GAP between UM and Boundary : ECGA FOR PRESHOWER PLANE |
| | 366 | //========================================================== |
| | 367 | // Make a 10.3mm thick Air gap for Unit module A |
| | 368 | // X-dimension same as EHC1+0.05 |
| | 369 | // Y-dimension same as EHC1+0.05 |
| | 370 | // Z-dimension 1.03/2 = 0.515 cm |
| | 371 | Float_t dboxAir3A[3]; |
| | 372 | dboxAir3A[0] = dbox3[0]+(2.0*fgkGap); |
| | 373 | dboxAir3A[1] = dbox3[1]+(2.0*fgkGap); |
| | 374 | dboxAir3A[2] = fgkThAir/2.; |
| | 375 | |
| | 376 | //FOR PRESHOWER |
| | 377 | //Air gap is a BOX of Material Air |
| | 378 | gMC->Gsvolu("ECGA","BOX", idtmed[698], dboxAir3A, 3); |
| | 379 | gMC->Gsatt("ECGA", "SEEN", 0); |
| | 380 | |
| | 381 | //FOR VETO |
| | 382 | //Air gap is a BOX of Material Air |
| | 383 | gMC->Gsvolu("ECVA","BOX", idtmed[698], dboxAir3A, 3); |
| | 384 | gMC->Gsatt("ECVA", "SEEN", 0); |
| | 385 | //-------------------------------------------------// |
| | 386 | |
| | 387 | //-------------------------------------------------// |
| | 388 | //G10 boundary between honeycomb and SS : EDGA |
| | 389 | //================================================ |
| | 390 | // Make a 10.3mm thick G10 Boundary for Unit module A |
| | 391 | // X-dimension same as EHC1+Airgap+0.05 |
| | 392 | // Y-dimension same as EHC1+Airgap+0.05 |
| | 393 | // Z-dimension 1.03/2 = 0.515 cm |
| | 394 | Float_t dboxGGA[3]; |
| | 395 | dboxGGA[0] = dboxAir3A[0]+(2.0*fgkGap); |
| | 396 | dboxGGA[1] = dboxAir3A[1]+(2.0*fgkGap); |
| | 397 | dboxGGA[2] = fgkThG10/2.; |
| | 398 | |
| | 399 | //FOR PRESHOWER |
| | 400 | //G10 BOX |
| | 401 | gMC->Gsvolu("EDGA","BOX", idtmed[607], dboxGGA, 3); |
| | 402 | gMC->Gsatt("EDGA", "SEEN", 0); |
| | 403 | |
| | 404 | //FOR VETO |
| | 405 | //G10 BOX |
| | 406 | gMC->Gsvolu("EDVA","BOX", idtmed[607], dboxGGA, 3); |
| | 407 | gMC->Gsatt("EDVA", "SEEN", 0); |
| | 408 | |
| | 409 | //-------------------------------------------------// |
| | 410 | //----------------------------------------------------------// |
| | 411 | //Stainless Steel Bounadry : ESSA |
| | 412 | //================================== |
| | 413 | // Make a 10.3mm thick Stainless Steel boundary for Unit module A |
| | 414 | // X-dimension same as EHC1 + Airgap + G10 + 0.3 |
| | 415 | // Y-dimension same as EHC1 + Airgap + G10 + 0.3 |
| | 416 | // Z-dimension 1.03/2 = 0.515 cm |
| | 417 | //------------------------------------------------------// |
| | 418 | // A Stainless Steel Boundary Channel to house the unit module |
| | 419 | Float_t fDboxss1[3]; |
| | 420 | fDboxss1[0] = dboxGGA[0]+fgkSSBoundary; |
| | 421 | fDboxss1[1] = dboxGGA[1]+fgkSSBoundary; |
| | 422 | fDboxss1[2] = fgkThSS/2.; |
| | 423 | |
| | 424 | //FOR PRESHOWER |
| | 425 | |
| | 426 | //Stainless Steel boundary - Material Stainless Steel |
| | 427 | gMC->Gsvolu("ESSA","BOX", idtmed[618], fDboxss1, 3); |
| | 428 | gMC->Gsatt("ESSA", "SEEN", 0); |
| | 429 | |
| | 430 | //FOR VETO |
| | 431 | //Stainless Steel boundary - Material Stainless Steel |
| | 432 | gMC->Gsvolu("ESVA","BOX", idtmed[618], fDboxss1, 3); |
| | 433 | gMC->Gsatt("ESVA", "SEEN", 0); |
| | 434 | |
| | 435 | //----------------------------------------------------------------// |
| | 436 | |
| | 437 | //----------------------------------------------------------------// |
| | 438 | // Here we need to place the volume in order ESSA -> EDGA -> ECGA |
| | 439 | // this makes the SS boundary and the 0.5mm thick FR4 insulation in place, |
| | 440 | // and the air volume ECGA acts as mother for the rest of components. |
| | 441 | // The above placeemnt is done at (0.,0.,0.) relative coordiante |
| | 442 | // Now we place bottom PCB, honeycomb, top PCB in this volume. We donot place |
| | 443 | // unnecessary air volumes now. Just leave the gap as we are placing them |
| | 444 | // in air only. This also reduces the number of volumes for geant to track. |
| | 445 | |
| | 446 | // Tree structure for different volumes |
| | 447 | // |
| | 448 | // EUM1 |
| | 449 | // | |
| | 450 | // -------------------- |
| | 451 | // | | | |
| | 452 | // EBPA ESSA EBKA |
| | 453 | // | |
| | 454 | // EDGA |
| | 455 | // | |
| | 456 | // ECGA |
| | 457 | // | |
| | 458 | // -------------------- |
| | 459 | // | | | |
| | 460 | // EPCA(1) EHC1 EPCA(2) |
| | 461 | // (bottom) | (top PCB) |
| | 462 | // | |
| | 463 | // Sensitive volume |
| | 464 | // (gas) |
| | 465 | // |
| | 466 | |
| | 467 | |
| | 468 | //FOR VETO |
| | 469 | //Creating the side channels |
| | 470 | // SS boundary channel, followed by G10 and Air Gap |
| | 471 | gMC->Gspos("EDVA", 1, "ESVA", 0., 0., 0., 0, "ONLY"); |
| | 472 | gMC->Gspos("ECVA", 1, "EDVA", 0., 0., 0., 0, "ONLY"); |
| | 473 | |
| | 474 | //FOR PRESHOWER |
| | 475 | gMC->Gspos("EDGA", 1, "ESSA", 0., 0., 0., 0, "ONLY"); |
| | 476 | gMC->Gspos("ECGA", 1, "EDGA", 0., 0., 0., 0, "ONLY"); |
| | 477 | |
| | 478 | // now other components, using Bedanga's code, but changing the values. |
| | 479 | //Positioning Bottom PCB, Honey Comb abd Top PCB in AIR |
| | 480 | |
| | 481 | //For veto plane |
| | 482 | //Positioning the Bottom 0.16 cm PCB |
| | 483 | Float_t zbpcb = -dboxAir3A[2] + (2.0*fgkGap) + fgkThPCB/2.; |
| | 484 | gMC->Gspos("EPCA", 1, "ECVA", 0., 0., zbpcb, 0, "ONLY"); |
| | 485 | //Positioning the Honey Comb 0.5 cm |
| | 486 | Float_t zhc = zbpcb + fgkThPCB/2. + fgkCellDepth/2.; |
| | 487 | gMC->Gspos("EHC1", 1, "ECVA", 0., 0., zhc, 0, "ONLY"); |
| | 488 | //Positioning the Top PCB 0.16 cm |
| | 489 | Float_t ztpcb = zhc + fgkCellDepth/2 + fgkThPCB/2.; |
| | 490 | gMC->Gspos("EPCA", 2, "ECVA", 0., 0., ztpcb, 0, "ONLY"); |
| | 491 | |
| | 492 | |
| | 493 | //For Preshower plane the ordering is reversed |
| | 494 | //Positioning the Bottom 0.16 cm PCB |
| | 495 | zbpcb = -dboxAir3A[2] + fgkThPCB + fgkThPCB/2.; |
| | 496 | gMC->Gspos("EPCA", 1, "ECGA", 0., 0., zbpcb, 0, "ONLY"); |
| | 497 | //Positioning the Honey Comb 0.5 cm |
| | 498 | zhc = zbpcb + fgkThPCB/2. + fgkCellDepth/2.; |
| | 499 | gMC->Gspos("EHC1", 1, "ECGA", 0., 0., zhc, 0, "ONLY"); |
| | 500 | //Positioning the Top PCB 0.16 cm |
| | 501 | ztpcb = zhc + fgkCellDepth/2 + fgkThPCB/2.; |
| | 502 | gMC->Gspos("EPCA", 2, "ECGA", 0., 0., ztpcb, 0, "ONLY"); |
| | 503 | |
| | 504 | |
| | 505 | |
| | 506 | |
| | 507 | //--------------Now let us construct final UM ---------------// |
| | 508 | // We will do it as follows : |
| | 509 | // (i) First make a UM of air. which will have dimensions |
| | 510 | // of the SS boundary Channel (in x,y) and of height 13.3mm |
| | 511 | //(ii) Then we will place all the components |
| | 512 | |
| | 513 | //----------------------------------------------------------// |
| | 514 | // A unit module type A of Air |
| | 515 | // Dimensions of Unit Module same as SS boundary channel |
| | 516 | Float_t fDboxum1[3]; |
| | 517 | fDboxum1[0] = fDboxss1[0]; |
| | 518 | fDboxum1[1] = fDboxss1[1]; |
| | 519 | fDboxum1[2] = fgkThSS/2. +0.15; // 0.15 added to accomodate Base Plate at |
| | 520 | // the bottom and the backplane PCB at the top. |
| | 521 | |
| | 522 | //FOR PRESHOWER |
| | 523 | //Create a Unit module of above dimensions Material : AIR |
| | 524 | gMC->Gsvolu("EUM1","BOX", idtmed[698], fDboxum1, 3); |
| | 525 | gMC->Gsatt("EUM1", "SEEN", 0); |
| | 526 | //FOR VETO |
| | 527 | gMC->Gsvolu("EUV1","BOX", idtmed[698], fDboxum1, 3); |
| | 528 | gMC->Gsatt("EUV1", "SEEN", 0); |
| | 529 | |
| | 530 | //----------------------------------------------------------------// |
| | 531 | |
| | 532 | //BASE PLATE : EBPA |
| | 533 | //================== |
| | 534 | // Make a 2mm thick G10 Base plate for Unit module A |
| | 535 | // Base plate is as big as the final UM dimensions that is as |
| | 536 | // SS boundary channel |
| | 537 | Float_t dboxBaseA[3]; |
| | 538 | dboxBaseA[0] = fDboxss1[0]; |
| | 539 | dboxBaseA[1] = fDboxss1[1]; |
| | 540 | dboxBaseA[2] = fgkThBase/2.; |
| | 541 | |
| | 542 | //Base Blate is a G10 BOX |
| | 543 | gMC->Gsvolu("EBPA","BOX", idtmed[607], dboxBaseA, 3); |
| | 544 | gMC->Gsatt("EBPA", "SEEN", 0); |
| | 545 | //----------------------------------------------------// |
| | 546 | |
| | 547 | //FOR VETO |
| | 548 | //- Placing of all components of UM in AIR BOX EUM1--// |
| | 549 | //(1) FIRST PUT THE BASE PLATE |
| | 550 | Float_t zbaseplate = -fDboxum1[2] + fgkThBase/2.; |
| | 551 | gMC->Gspos("EBPA", 1, "EUV1", 0., 0., zbaseplate, 0, "ONLY"); |
| | 552 | |
| | 553 | //(2) NEXT PLACING the SS BOX |
| | 554 | Float_t zss = zbaseplate + fgkThBase/2. + fgkThSS/2.; |
| | 555 | gMC->Gspos("ESVA", 1, "EUV1", 0., 0., zss, 0, "ONLY"); |
| | 556 | |
| | 557 | // (3) Positioning the Backplane PCB 0.1 cm |
| | 558 | Float_t zbkp = zss + fgkThSS/2. + fgkThBKP/2.; |
| | 559 | gMC->Gspos("EBKA", 1, "EUV1", 0., 0., zbkp, 0, "ONLY"); |
| | 560 | |
| | 561 | //FOR PRESHOWER |
| | 562 | // (3) Positioning the Backplane PCB 0.1 cm |
| | 563 | zbkp = -fDboxum1[2] + fgkThBKP/2.; |
| | 564 | gMC->Gspos("EBKA", 1, "EUM1", 0., 0., zbkp, 0, "ONLY"); |
| | 565 | |
| | 566 | //(2) NEXT PLACING the SS BOX |
| | 567 | zss = zbkp + fgkThBKP/2. + fgkThSS/2.; |
| | 568 | gMC->Gspos("ESSA", 1, "EUM1", 0., 0., zss, 0, "ONLY"); |
| | 569 | |
| | 570 | //(1) FIRST PUT THE BASE PLATE |
| | 571 | zbaseplate = zss + fgkThSS/2 + fgkThBase/2.; |
| | 572 | gMC->Gspos("EBPA", 1, "EUM1", 0., 0., zbaseplate, 0, "ONLY"); |
| | 573 | //-------------------- UM Type A completed ------------------------// |
| | 574 | |
| | 575 | |
| | 576 | |
| | 577 | //-------------------- Lets do the same thing for UM type B -------// |
| | 578 | //--------------------------------------------------// |
| | 579 | //Bottom and Top PCB : EPCB |
| | 580 | //=========================== |
| | 581 | // Make a 1.6mm thick G10 Bottom and Top PCB for Unit module B |
| | 582 | // X-dimension same as EHC2 - dbox4[0] |
| | 583 | // Y-dimension same as EHC2 - dbox4[1] |
| | 584 | // Z-dimension 0.16/2 = 0.08 cm |
| | 585 | //-------------------------------------------------// |
| | 586 | Float_t dboxPcbB[3]; |
| | 587 | dboxPcbB[0] = dbox4[0]; |
| | 588 | dboxPcbB[1] = dbox4[1]; |
| | 589 | dboxPcbB[2] = fgkThPCB/2.; |
| | 590 | |
| | 591 | //Top and Bottom PCB is a BOX of Material G10 |
| | 592 | gMC->Gsvolu("EPCB","BOX", idtmed[607], dboxPcbB, 3); |
| | 593 | gMC->Gsatt("EPCB", "SEEN", 0); |
| | 594 | //--------------------------------------------------------// |
| | 595 | //Back Plane : EBKB |
| | 596 | //================== |
| | 597 | // Make a 1.0mm thick Back Plane PCB for Unit module B |
| | 598 | // X-dimension same as EHC2 - dbox4[0] |
| | 599 | // Y-dimension same as EHC2 - dbox4[1] |
| | 600 | // Z-dimension 0.1/2 = 0.05 cm |
| | 601 | //------------------------------------------------------// |
| | 602 | Float_t dboxBPlaneB[3]; |
| | 603 | dboxBPlaneB[0] = dbox4[0]; |
| | 604 | dboxBPlaneB[1] = dbox4[1]; |
| | 605 | dboxBPlaneB[2] = fgkThBKP/2.; |
| | 606 | |
| | 607 | //Back PLane PCB of MAterial G10 |
| | 608 | gMC->Gsvolu("EBKB","BOX", idtmed[607], dboxBPlaneB, 3); |
| | 609 | gMC->Gsatt("EBKB", "SEEN", 0); |
| | 610 | //-------------------------------------------------------------// |
| | 611 | |
| | 612 | //---------- That was all in the Z -direction of Unit Module B----// |
| | 613 | |
| | 614 | // Now lets us construct the boundary arround the Unit Module --// |
| | 615 | // This boundary has |
| | 616 | // (a) 0.5 mm X and Y and 10.3 mm Z dimension AIR gap |
| | 617 | // (b) 0.5 mm X and Y and 10.3 mm Z dimension G10 |
| | 618 | // (c) 3.0 mm X and Y and 12.3 mm Z dimension Stainless Steel |
| | 619 | |
| | 620 | //-------------------------------------------------// |
| | 621 | //AIR GAP between UM and Boundary : ECGB |
| | 622 | //================================================ |
| | 623 | // Make a 10.3mm thick Air gap for Unit module B |
| | 624 | // X-dimension same as EHC2+0.05 |
| | 625 | // Y-dimension same as EHC2+0.05 |
| | 626 | // Z-dimension 1.03/2 = 0.515 cm |
| | 627 | Float_t dboxAir3B[3]; |
| | 628 | dboxAir3B[0] = dbox4[0]+(2.0*fgkGap); |
| | 629 | dboxAir3B[1] = dbox4[1]+(2.0*fgkGap); |
| | 630 | dboxAir3B[2] = fgkThAir/2.; |
| | 631 | |
| | 632 | //PRESHOWER |
| | 633 | //Air gap is a BOX of Material Air |
| | 634 | gMC->Gsvolu("ECGB","BOX", idtmed[698], dboxAir3B, 3); |
| | 635 | gMC->Gsatt("ECGB", "SEEN", 0); |
| | 636 | //VETO |
| | 637 | gMC->Gsvolu("ECVB","BOX", idtmed[698], dboxAir3B, 3); |
| | 638 | gMC->Gsatt("ECVB", "SEEN", 0); |
| | 639 | |
| | 640 | //-------------------------------------------------// |
| | 641 | |
| | 642 | //-------------------------------------------------// |
| | 643 | //G10 boundary between honeycomb and SS : EDGB |
| | 644 | //================================================ |
| | 645 | // Make a 10.3mm thick G10 Boundary for Unit module B |
| | 646 | // X-dimension same as EHC2+Airgap+0.05 |
| | 647 | // Y-dimension same as EHC2+Airgap+0.05 |
| | 648 | // Z-dimension 1.03/2 = 0.515 cm |
| | 649 | Float_t dboxGGB[3]; |
| | 650 | dboxGGB[0] = dboxAir3B[0]+(2.0*fgkGap); |
| | 651 | dboxGGB[1] = dboxAir3B[1]+(2.0*fgkGap); |
| | 652 | dboxGGB[2] = fgkThG10/2.; |
| | 653 | |
| | 654 | //PRESHOWER |
| | 655 | //G10 BOX |
| | 656 | gMC->Gsvolu("EDGB","BOX", idtmed[607], dboxGGB, 3); |
| | 657 | gMC->Gsatt("EDGB", "SEEN", 0); |
| | 658 | //VETO |
| | 659 | gMC->Gsvolu("EDVB","BOX", idtmed[607], dboxGGB, 3); |
| | 660 | gMC->Gsatt("EDVB", "SEEN", 0); |
| | 661 | //-------------------------------------------------// |
| | 662 | //----------------------------------------------------------// |
| | 663 | //Stainless Steel Bounadry : ESSB |
| | 664 | //================================== |
| | 665 | // Make a 10.3mm thick Stainless Steel boundary for Unit module B |
| | 666 | // X-dimension same as EHC2 + Airgap + G10 + 0.3 |
| | 667 | // Y-dimension same as EHC2 + Airgap + G10 + 0.3 |
| | 668 | // Z-dimension 1.03/2 = 0.515 cm |
| | 669 | //------------------------------------------------------// |
| | 670 | // A Stainless Steel Boundary Channel to house the unit module |
| | 671 | Float_t fDboxss2[3]; |
| | 672 | fDboxss2[0] = dboxGGB[0]+fgkSSBoundary; |
| | 673 | fDboxss2[1] = dboxGGB[1]+fgkSSBoundary; |
| | 674 | fDboxss2[2] = fgkThSS/2.; |
| | 675 | |
| | 676 | //PRESHOWER |
| | 677 | //Stainless Steel boundary - Material Stainless Steel |
| | 678 | gMC->Gsvolu("ESSB","BOX", idtmed[618], fDboxss2, 3); |
| | 679 | gMC->Gsatt("ESSB", "SEEN", 0); |
| | 680 | //VETO |
| | 681 | gMC->Gsvolu("ESVB","BOX", idtmed[618], fDboxss2, 3); |
| | 682 | gMC->Gsatt("ESVB", "SEEN", 0); |
| | 683 | //----------------------------------------------------------------// |
| | 684 | |
| | 685 | //----------------------------------------------------------------// |
| | 686 | // Here we need to place the volume in order ESSB -> EDGB -> ECGB |
| | 687 | // this makes the SS boiundary and the 0.5mm thick FR4 insulation in place, |
| | 688 | // and the air volume ECGB acts as mother for the rest of components. |
| | 689 | // The above placeemnt is done at (0.,0.,0.) relative coordiante |
| | 690 | // Now we place bottom PCB, honeycomb, top PCB in this volume. We donot place |
| | 691 | // unnecessary air volumes now. Just leave the gap as we are placing them |
| | 692 | // in air only. This also reduces the number of volumes for geant to track. |
| | 693 | |
| | 694 | // Tree structure for different volumes |
| | 695 | // |
| | 696 | // EUM2 |
| | 697 | // | |
| | 698 | // -------------------- |
| | 699 | // | | | |
| | 700 | // EBPB ESSB EBKB |
| | 701 | // | |
| | 702 | // EDGB |
| | 703 | // | |
| | 704 | // ECGB |
| | 705 | // | |
| | 706 | // -------------------- |
| | 707 | // | | | |
| | 708 | // EPCB(1) EHC2 EPCB(2) |
| | 709 | // (bottom) | (top PCB) |
| | 710 | // | |
| | 711 | // Sensitive volume |
| | 712 | // (gas) |
| | 713 | // |
| | 714 | |
| | 715 | //PRESHOWER |
| | 716 | //Creating the side channels |
| | 717 | // SS boundary channel, followed by G10 and Air Gap |
| | 718 | gMC->Gspos("EDGB", 1, "ESSB", 0., 0., 0., 0, "ONLY"); |
| | 719 | gMC->Gspos("ECGB", 1, "EDGB", 0., 0., 0., 0, "ONLY"); |
| | 720 | //VETO |
| | 721 | gMC->Gspos("EDVB", 1, "ESVB", 0., 0., 0., 0, "ONLY"); |
| | 722 | gMC->Gspos("ECVB", 1, "EDVB", 0., 0., 0., 0, "ONLY"); |
| | 723 | |
| | 724 | // now other components, using Bedang's code, but changing the values. |
| | 725 | //Positioning Bottom PCB, Honey Comb abd Top PCB in AIR |
| | 726 | |
| | 727 | //VETO |
| | 728 | //Positioning the Bottom 0.16 cm PCB |
| | 729 | Float_t zbpcb2 = -dboxAir3B[2] + (2.0*fgkGap) + fgkThPCB/2.; |
| | 730 | gMC->Gspos("EPCB", 1, "ECVB", 0., 0., zbpcb2, 0, "ONLY"); |
| | 731 | //Positioning the Honey Comb 0.5 cm |
| | 732 | Float_t zhc2 = zbpcb2 + fgkThPCB/2. + fgkCellDepth/2.; |
| | 733 | gMC->Gspos("EHC2", 1, "ECVB", 0., 0., zhc2, 0, "ONLY"); |
| | 734 | //Positioning the Top PCB 0.16 cm |
| | 735 | Float_t ztpcb2 = zhc2 + fgkCellDepth/2 + fgkThPCB/2.; |
| | 736 | gMC->Gspos("EPCB", 2, "ECVB", 0., 0., ztpcb2, 0, "ONLY"); |
| | 737 | |
| | 738 | //PRESHOWER |
| | 739 | //For preshower plane the ordering is reversed |
| | 740 | //Positioning the Bottom 0.16 cm PCB |
| | 741 | zbpcb2 = -dboxAir3B[2] + fgkThPCB + fgkThPCB/2.; |
| | 742 | gMC->Gspos("EPCB", 1, "ECGB", 0., 0., zbpcb2, 0, "ONLY"); |
| | 743 | //Positioning the Honey Comb 0.5 cm |
| | 744 | zhc2 = zbpcb2 + fgkThPCB/2. + fgkCellDepth/2.; |
| | 745 | gMC->Gspos("EHC2", 1, "ECGB", 0., 0., zhc2, 0, "ONLY"); |
| | 746 | //Positioning the Top PCB 0.16 cm |
| | 747 | ztpcb2 = zhc2 + fgkCellDepth/2 + fgkThPCB/2.; |
| | 748 | gMC->Gspos("EPCB", 2, "ECGB", 0., 0., ztpcb2, 0, "ONLY"); |
| | 749 | |
| | 750 | |
| | 751 | |
| | 752 | //--------------Now let us construct final UM ---------------// |
| | 753 | // We will do it as follows : |
| | 754 | // (i) First make a UM of air. which will have dimensions |
| | 755 | // of the SS boundary Channel (in x,y) and of height 13.3mm |
| | 756 | //(ii) Then we will place all the components |
| | 757 | |
| | 758 | //----------------------------------------------------------// |
| | 759 | // A unit module type B of Air |
| | 760 | // Dimensions of Unit Module same as SS boundary channel |
| | 761 | Float_t fDboxum2[3]; |
| | 762 | fDboxum2[0] = fDboxss2[0]; |
| | 763 | fDboxum2[1] = fDboxss2[1]; |
| | 764 | fDboxum2[2] = fgkThSS/2. +0.15; // 0.15 added to accomodate Base Plate at |
| | 765 | // the bottom and the backplane PCB at the top. |
| | 766 | |
| | 767 | //PRESHOWER |
| | 768 | //Create a Unit module of above dimensions Material : AIR |
| | 769 | gMC->Gsvolu("EUM2","BOX", idtmed[698], fDboxum2, 3); |
| | 770 | gMC->Gsatt("EUM2", "SEEN", 0); |
| | 771 | |
| | 772 | //VETO |
| | 773 | gMC->Gsvolu("EUV2","BOX", idtmed[698], fDboxum2, 3); |
| | 774 | gMC->Gsatt("EUV2", "SEEN", 0); |
| | 775 | //----------------------------------------------------------------// |
| | 776 | |
| | 777 | //BASE PLATE : EBPB |
| | 778 | //================== |
| | 779 | // Make a 2mm thick G10 Base plate for Unit module B |
| | 780 | // Base plate is as big as the final UM dimensions that is as |
| | 781 | // SS boundary channel |
| | 782 | Float_t dboxBaseB[3]; |
| | 783 | dboxBaseB[0] = fDboxss2[0]; |
| | 784 | dboxBaseB[1] = fDboxss2[1]; |
| | 785 | dboxBaseB[2] = fgkThBase/2.; |
| | 786 | |
| | 787 | //Base Blate is a G10 BOX |
| | 788 | gMC->Gsvolu("EBPB","BOX", idtmed[607], dboxBaseB, 3); |
| | 789 | gMC->Gsatt("EBPB", "SEEN", 0); |
| | 790 | //----------------------------------------------------// |
| | 791 | |
| | 792 | //VETO |
| | 793 | //- Placing of all components of UM in AIR BOX EUM2--// |
| | 794 | //(1) FIRST PUT THE BASE PLATE |
| | 795 | Float_t zbaseplate2 = -fDboxum2[2] + fgkThBase/2.; |
| | 796 | gMC->Gspos("EBPB", 1, "EUV2", 0., 0., zbaseplate2, 0, "ONLY"); |
| | 797 | |
| | 798 | //(2) NEXT PLACING the SS BOX |
| | 799 | Float_t zss2 = zbaseplate2 + fgkThBase/2. + fgkThSS/2.; |
| | 800 | gMC->Gspos("ESVB", 1, "EUV2", 0., 0., zss2, 0, "ONLY"); |
| | 801 | |
| | 802 | // (3) Positioning the Backplane PCB 0.1 cm |
| | 803 | Float_t zbkp2 = zss2 + fgkThSS/2. + fgkThBKP/2.; |
| | 804 | gMC->Gspos("EBKB", 1, "EUV2", 0., 0., zbkp2, 0, "ONLY"); |
| | 805 | |
| | 806 | |
| | 807 | |
| | 808 | //FOR PRESHOWER |
| | 809 | // (3) Positioning the Backplane PCB 0.1 cm |
| | 810 | zbkp2 = -fDboxum2[2] + fgkThBKP/2.; |
| | 811 | gMC->Gspos("EBKB", 1, "EUM2", 0., 0., zbkp2, 0, "ONLY"); |
| | 812 | |
| | 813 | //(2) NEXT PLACING the SS BOX |
| | 814 | zss2 = zbkp2 + fgkThBKP/2. + fgkThSS/2.; |
| | 815 | gMC->Gspos("ESSB", 1, "EUM2", 0., 0., zss2, 0, "ONLY"); |
| | 816 | |
| | 817 | //(1) FIRST PUT THE BASE PLATE |
| | 818 | zbaseplate2 = zss2 + fgkThSS/2 + fgkThBase/2.; |
| | 819 | gMC->Gspos("EBPB", 1, "EUM2", 0., 0., zbaseplate2, 0, "ONLY"); |
| | 820 | //-------------------- UM Type B completed ------------------------// |
| | 821 | |
| | 822 | |
| | 823 | //--- Now we need to make Lead plates of UM dimension -----// |
| | 824 | |
| | 825 | /**************************/ |
| | 826 | //----------------------------------------------------------// |
| | 827 | // The lead convertor is of unit module size |
| | 828 | // Dimensions of Unit Module same as SS boundary channel |
| | 829 | |
| | 830 | Float_t dboxPba[3]; |
| | 831 | dboxPba[0] = fDboxum1[0]; |
| | 832 | dboxPba[1] = fDboxum1[1]; |
| | 833 | dboxPba[2] = fgkThLead/2.; |
| | 834 | // Lead of UM dimension |
| | 835 | gMC->Gsvolu("EPB1","BOX", idtmed[600], dboxPba, 3); |
| | 836 | gMC->Gsatt ("EPB1", "SEEN", 0); |
| | 837 | |
| | 838 | Float_t dboxPbb[3]; |
| | 839 | dboxPbb[0] = fDboxum2[0]; |
| | 840 | dboxPbb[1] = fDboxum2[1]; |
| | 841 | dboxPbb[2] = fgkThLead/2.; |
| | 842 | // Lead of UM dimension |
| | 843 | gMC->Gsvolu("EPB2","BOX", idtmed[600], dboxPbb, 3); |
| | 844 | gMC->Gsatt ("EPB2", "SEEN", 0); |
| | 845 | |
| | 846 | //----------------------------------------------------------------// |
| | 847 | |
| | 848 | // 2 types of Rectangular shaped supermodules (BOX) |
| | 849 | //each with 6 unit modules |
| | 850 | |
| | 851 | // volume for SUPERMODULE ESMA |
| | 852 | //Space added to provide a gapping for HV between UM's |
| | 853 | //There is a gap of 0.15 cm between two Modules (UMs) |
| | 854 | // in x-direction and 0.1cm along y-direction |
| | 855 | |
| | 856 | Float_t dboxSM1[3]; |
| | 857 | dboxSM1[0] = 3.0*fDboxum1[0] + (2.0*0.075); |
| | 858 | dboxSM1[1] = 2.0*fDboxum1[1] + 0.05; |
| | 859 | dboxSM1[2] = fDboxum1[2]; |
| | 860 | |
| | 861 | //FOR PRESHOWER |
| | 862 | gMC->Gsvolu("ESMA","BOX", idtmed[698], dboxSM1, 3); |
| | 863 | gMC->Gsatt("ESMA", "SEEN", 0); |
| | 864 | |
| | 865 | //FOR VETO |
| | 866 | gMC->Gsvolu("EMVA","BOX", idtmed[698], dboxSM1, 3); |
| | 867 | gMC->Gsatt("EMVA", "SEEN", 0); |
| | 868 | |
| | 869 | //Position the 6 unit modules in EMSA |
| | 870 | Float_t xa1,xa2,xa3,ya1,ya2; |
| | 871 | xa1 = dboxSM1[0] - fDboxum1[0]; |
| | 872 | xa2 = xa1 - fDboxum1[0] - 0.15 - fDboxum1[0]; |
| | 873 | xa3 = xa2 - fDboxum1[0] - 0.15 - fDboxum1[0]; |
| | 874 | ya1 = dboxSM1[1] - fDboxum1[1]; |
| | 875 | ya2 = ya1 - fDboxum1[1] - 0.1 - fDboxum1[1]; |
| | 876 | |
| | 877 | //PRESHOWER |
| | 878 | gMC->Gspos("EUM1", 1, "ESMA", xa1, ya1, 0., 0, "ONLY"); |
| | 879 | gMC->Gspos("EUM1", 2, "ESMA", xa2, ya1, 0., 0, "ONLY"); |
| | 880 | gMC->Gspos("EUM1", 3, "ESMA", xa3, ya1, 0., 0, "ONLY"); |
| | 881 | gMC->Gspos("EUM1", 4, "ESMA", xa1, ya2, 0., 0, "ONLY"); |
| | 882 | gMC->Gspos("EUM1", 5, "ESMA", xa2, ya2, 0., 0, "ONLY"); |
| | 883 | gMC->Gspos("EUM1", 6, "ESMA", xa3, ya2, 0., 0, "ONLY"); |
| | 884 | |
| | 885 | //VETO |
| | 886 | gMC->Gspos("EUV1", 1, "EMVA", xa1, ya1, 0., 0, "ONLY"); |
| | 887 | gMC->Gspos("EUV1", 2, "EMVA", xa2, ya1, 0., 0, "ONLY"); |
| | 888 | gMC->Gspos("EUV1", 3, "EMVA", xa3, ya1, 0., 0, "ONLY"); |
| | 889 | gMC->Gspos("EUV1", 4, "EMVA", xa1, ya2, 0., 0, "ONLY"); |
| | 890 | gMC->Gspos("EUV1", 5, "EMVA", xa2, ya2, 0., 0, "ONLY"); |
| | 891 | gMC->Gspos("EUV1", 6, "EMVA", xa3, ya2, 0., 0, "ONLY"); |
| | 892 | |
| | 893 | |
| | 894 | // volume for SUPERMODULE ESMB |
| | 895 | //Space is added to provide a gapping for HV between UM's |
| | 896 | Float_t dboxSM2[3]; |
| | 897 | dboxSM2[0] = 2.0*fDboxum2[0] + 0.075; |
| | 898 | dboxSM2[1] = 3.0*fDboxum2[1] + (2.0*0.05); |
| | 899 | dboxSM2[2] = fDboxum2[2]; |
| | 900 | |
| | 901 | //PRESHOWER |
| | 902 | gMC->Gsvolu("ESMB","BOX", idtmed[698], dboxSM2, 3); |
| | 903 | gMC->Gsatt("ESMB", "SEEN", 0); |
| | 904 | //VETO |
| | 905 | gMC->Gsvolu("EMVB","BOX", idtmed[698], dboxSM2, 3); |
| | 906 | gMC->Gsatt("EMVB", "SEEN", 0); |
| | 907 | |
| | 908 | //Position the 6 unit modules in EMSB |
| | 909 | Float_t xb1,xb2,yb1,yb2,yb3; |
| | 910 | xb1 = dboxSM2[0] - fDboxum2[0]; |
| | 911 | xb2 = xb1 - fDboxum2[0] - 0.15 - fDboxum2[0]; |
| | 912 | yb1 = dboxSM2[1]-fDboxum2[1]; |
| | 913 | yb2 = yb1 - fDboxum2[1] - 0.1 - fDboxum2[1]; |
| | 914 | yb3 = yb2 - fDboxum2[1] - 0.1 - fDboxum2[1]; |
| | 915 | |
| | 916 | |
| | 917 | //PRESHOWER |
| | 918 | gMC->Gspos("EUM2", 1, "ESMB", xb1, yb1, 0., 0, "ONLY"); |
| | 919 | gMC->Gspos("EUM2", 2, "ESMB", xb2, yb1, 0., 0, "ONLY"); |
| | 920 | gMC->Gspos("EUM2", 3, "ESMB", xb1, yb2, 0., 0, "ONLY"); |
| | 921 | gMC->Gspos("EUM2", 4, "ESMB", xb2, yb2, 0., 0, "ONLY"); |
| | 922 | gMC->Gspos("EUM2", 5, "ESMB", xb1, yb3, 0., 0, "ONLY"); |
| | 923 | gMC->Gspos("EUM2", 6, "ESMB", xb2, yb3, 0., 0, "ONLY"); |
| | 924 | |
| | 925 | //VETO |
| | 926 | gMC->Gspos("EUV2", 1, "EMVB", xb1, yb1, 0., 0, "ONLY"); |
| | 927 | gMC->Gspos("EUV2", 2, "EMVB", xb2, yb1, 0., 0, "ONLY"); |
| | 928 | gMC->Gspos("EUV2", 3, "EMVB", xb1, yb2, 0., 0, "ONLY"); |
| | 929 | gMC->Gspos("EUV2", 4, "EMVB", xb2, yb2, 0., 0, "ONLY"); |
| | 930 | gMC->Gspos("EUV2", 5, "EMVB", xb1, yb3, 0., 0, "ONLY"); |
| | 931 | gMC->Gspos("EUV2", 6, "EMVB", xb2, yb3, 0., 0, "ONLY"); |
| | 932 | |
| | 933 | // Make smiliar stucture for lead as for PMD plane |
| | 934 | //================================================ |
| | 935 | |
| | 936 | // 2 types of Rectangular shaped supermodules (BOX) |
| | 937 | //each with 6 unit modules |
| | 938 | |
| | 939 | // volume for SUPERMODULE ESMPbA |
| | 940 | //Space added to provide a gapping for HV between UM's |
| | 941 | |
| | 942 | Float_t dboxSMPb1[3]; |
| | 943 | dboxSMPb1[0] = 3.0*fDboxum1[0] + (2.0*0.075); |
| | 944 | dboxSMPb1[1] = 2.0*fDboxum1[1] + 0.05; |
| | 945 | dboxSMPb1[2] = fgkThLead/2.; |
| | 946 | |
| | 947 | gMC->Gsvolu("ESPA","BOX", idtmed[698], dboxSMPb1, 3); |
| | 948 | gMC->Gsatt("ESPA", "SEEN", 0); |
| | 949 | |
| | 950 | |
| | 951 | //Position the 6 unit modules in ESMPbA |
| | 952 | Float_t xpa1,xpa2,xpa3,ypa1,ypa2; |
| | 953 | xpa1 = -dboxSMPb1[0] + fDboxum1[0]; |
| | 954 | xpa2 = xpa1 + fDboxum1[0] + 0.15 + fDboxum1[0]; |
| | 955 | xpa3 = xpa2 + fDboxum1[0] + 0.15 + fDboxum1[0]; |
| | 956 | ypa1 = dboxSMPb1[1] - fDboxum1[1]; |
| | 957 | ypa2 = ypa1 - fDboxum1[1] - 0.1 - fDboxum1[1]; |
| | 958 | |
| | 959 | |
| | 960 | gMC->Gspos("EPB1", 1, "ESPA", xpa1, ypa1, 0., 0, "ONLY"); |
| | 961 | gMC->Gspos("EPB1", 2, "ESPA", xpa2, ypa1, 0., 0, "ONLY"); |
| | 962 | gMC->Gspos("EPB1", 3, "ESPA", xpa3, ypa1, 0., 0, "ONLY"); |
| | 963 | gMC->Gspos("EPB1", 4, "ESPA", xpa1, ypa2, 0., 0, "ONLY"); |
| | 964 | gMC->Gspos("EPB1", 5, "ESPA", xpa2, ypa2, 0., 0, "ONLY"); |
| | 965 | gMC->Gspos("EPB1", 6, "ESPA", xpa3, ypa2, 0., 0, "ONLY"); |
| | 966 | |
| | 967 | |
| | 968 | // volume for SUPERMODULE ESMPbB |
| | 969 | //Space is added to provide a gapping for HV between UM's |
| | 970 | Float_t dboxSMPb2[3]; |
| | 971 | dboxSMPb2[0] = 2.0*fDboxum2[0] + 0.075; |
| | 972 | dboxSMPb2[1] = 3.0*fDboxum2[1] + (2.0*0.05); |
| | 973 | dboxSMPb2[2] = fgkThLead/2.; |
| | 974 | |
| | 975 | gMC->Gsvolu("ESPB","BOX", idtmed[698], dboxSMPb2, 3); |
| | 976 | gMC->Gsatt("ESPB", "SEEN", 0); |
| | 977 | |
| | 978 | //Position the 6 unit modules in ESMPbB |
| | 979 | Float_t xpb1,xpb2,ypb1,ypb2,ypb3; |
| | 980 | xpb1 = -dboxSMPb2[0] + fDboxum2[0]; |
| | 981 | xpb2 = xpb1 + fDboxum2[0] + 0.15 + fDboxum2[0]; |
| | 982 | ypb1 = dboxSMPb2[1] - fDboxum2[1]; |
| | 983 | ypb2 = ypb1 - fDboxum2[1] - 0.1 - fDboxum2[1]; |
| | 984 | ypb3 = ypb2 - fDboxum2[1] - 0.1 - fDboxum2[1]; |
| | 985 | |
| | 986 | |
| | 987 | gMC->Gspos("EPB2", 1, "ESPB", xpb1, ypb1, 0., 0, "ONLY"); |
| | 988 | gMC->Gspos("EPB2", 2, "ESPB", xpb2, ypb1, 0., 0, "ONLY"); |
| | 989 | gMC->Gspos("EPB2", 3, "ESPB", xpb1, ypb2, 0., 0, "ONLY"); |
| | 990 | gMC->Gspos("EPB2", 4, "ESPB", xpb2, ypb2, 0., 0, "ONLY"); |
| | 991 | gMC->Gspos("EPB2", 5, "ESPB", xpb1, ypb3, 0., 0, "ONLY"); |
| | 992 | gMC->Gspos("EPB2", 6, "ESPB", xpb2, ypb3, 0., 0, "ONLY"); |
| | 993 | |
| | 994 | |
| | 995 | //--------------------------------------------------- |
| | 996 | /// ALICE PMD FEE BOARDS IMPLEMENTATION |
| | 997 | // Dt: 25th February 2006 |
| | 998 | // - M.M. Mondal, S.K. Prasad and P.K. Netrakanti |
| | 999 | //--------------------------------------------------- |
| | 1000 | |
| | 1001 | //FEE boards |
| | 1002 | // It is FR4 board of length 7cm |
| | 1003 | // breadth of 2.4 cm and thickness 0.1cm |
| | 1004 | Float_t dboxFEE[3]; |
| | 1005 | dboxFEE[0] = 0.05; |
| | 1006 | dboxFEE[1] = 3.50; |
| | 1007 | dboxFEE[2] = 1.20; |
| | 1008 | |
| | 1009 | gMC->Gsvolu("EFEE","BOX", idtmed[607], dboxFEE, 3); |
| | 1010 | gMC->Gsatt("EFEE", "SEEN", 0); |
| | 1011 | gMC->Gsatt("EFEE", "COLO", 4); |
| | 1012 | |
| | 1013 | //Mother volume to accomodate FEE boards |
| | 1014 | // It should have the dimension |
| | 1015 | // as the back plane or the |
| | 1016 | //corresponding UM |
| | 1017 | //TYPE A |
| | 1018 | //------------------------------------------------------// |
| | 1019 | |
| | 1020 | Float_t dboxFEEBPlaneA[3]; |
| | 1021 | dboxFEEBPlaneA[0] = dboxBPlaneA[0]; //dbox3[0]; |
| | 1022 | dboxFEEBPlaneA[1] = dboxBPlaneA[1];//dbox3[1]; |
| | 1023 | dboxFEEBPlaneA[2] = 1.2; |
| | 1024 | |
| | 1025 | //Volume of same dimension as Back PLane of Material AIR |
| | 1026 | gMC->Gsvolu("EFBA","BOX", idtmed[698], dboxFEEBPlaneA, 3); |
| | 1027 | gMC->Gsatt("EFBA", "SEEN", 0); |
| | 1028 | |
| | 1029 | //TYPE B |
| | 1030 | Float_t dboxFEEBPlaneB[3]; |
| | 1031 | dboxFEEBPlaneB[0] = dboxBPlaneB[0]; //dbox4[0]; |
| | 1032 | dboxFEEBPlaneB[1] = dboxBPlaneB[1];//dbox4[1]; |
| | 1033 | dboxFEEBPlaneB[2] = 1.2; |
| | 1034 | |
| | 1035 | //Back PLane PCB of MAterial G10 |
| | 1036 | gMC->Gsvolu("EFBB","BOX", idtmed[698], dboxFEEBPlaneB, 3); |
| | 1037 | gMC->Gsatt("EFBB", "SEEN", 0); |
| | 1038 | |
| | 1039 | //Placing the FEE boards in the Mother volume of AIR |
| | 1040 | |
| | 1041 | //Type A |
| | 1042 | |
| | 1043 | Float_t x_fee; // X-position of FEE board |
| | 1044 | Float_t y_fee; // Y-position of FEE board |
| | 1045 | Float_t z_fee = 0.0; // Z-position of FEE board |
| | 1046 | |
| | 1047 | Float_t x_a = 0.25; //distance from the border to 1st FEE board |
| | 1048 | Float_t y_a = 4.00; //distance from the border to 1st FEE board |
| | 1049 | Float_t x_sepa = 1.70; //Distance between two FEE boards |
| | 1050 | Float_t y_sepa = 8.00; //Distance between two FEE boards |
| | 1051 | |
| | 1052 | |
| | 1053 | // FEE Boards EFEE placed inside EFBA |
| | 1054 | number = 1; |
| | 1055 | y_fee = dboxFEEBPlaneA[1] - y_a; |
| | 1056 | for (i = 1; i <= 6; ++i) |
| | 1057 | { |
| | 1058 | x_fee = -dboxFEEBPlaneA[0] + x_a; |
| | 1059 | for (j = 1; j <= 12; ++j) |
| | 1060 | { |
| | 1061 | gMC->Gspos("EFEE", number, "EFBA", x_fee,y_fee,z_fee, 0, "ONLY"); |
| | 1062 | x_fee += x_sepa; |
| | 1063 | number += 1; |
| | 1064 | } |
| | 1065 | y_fee -= y_sepa; |
| | 1066 | } |
| | 1067 | // FEE Boards EFEE placed inside EFBB |
| | 1068 | number = 1; |
| | 1069 | y_fee = dboxFEEBPlaneB[1] - y_a; |
| | 1070 | for (i = 1; i <= 3; ++i) |
| | 1071 | { |
| | 1072 | x_fee = -dboxFEEBPlaneB[0] + x_a; |
| | 1073 | for (j = 1; j <= 24; ++j) |
| | 1074 | { |
| | 1075 | gMC->Gspos("EFEE", number, "EFBB", x_fee,y_fee,z_fee, 0, "ONLY"); |
| | 1076 | x_fee += x_sepa; |
| | 1077 | number += 1; |
| | 1078 | } |
| | 1079 | y_fee -= y_sepa; |
| | 1080 | } |
| | 1081 | |
| | 1082 | |
| | 1083 | //Distance between the two backplanes of two UMs |
| | 1084 | //in x-direction is 0.92 and ydirection is 0.95 |
| | 1085 | Float_t dboxEFSA[3]; |
| | 1086 | dboxEFSA[0] = 3.0*dboxFEEBPlaneA[0] + 0.92; |
| | 1087 | dboxEFSA[1] = 2.0*dboxFEEBPlaneA[1] + (0.95/2.0); |
| | 1088 | dboxEFSA[2] = dboxFEEBPlaneA[2]; |
| | 1089 | |
| | 1090 | //Type A |
| | 1091 | gMC->Gsvolu("EFSA","BOX", idtmed[698],dboxEFSA, 3); |
| | 1092 | gMC->Gsatt("EFSA", "SEEN", 0); |
| | 1093 | |
| | 1094 | //Distance between the two backplanes of two UMs |
| | 1095 | //in x-direction is 0.92 and ydirection is 0.95 |
| | 1096 | Float_t dboxEFSB[3]; |
| | 1097 | dboxEFSB[0] = 2.0*dboxFEEBPlaneB[0] + (0.938/2.0); |
| | 1098 | dboxEFSB[1] = 3.0*dboxFEEBPlaneB[1] + 1.05; |
| | 1099 | dboxEFSB[2] = dboxFEEBPlaneB[2]; |
| | 1100 | |
| | 1101 | //Type A |
| | 1102 | gMC->Gsvolu("EFSB","BOX", idtmed[698],dboxEFSB, 3); |
| | 1103 | gMC->Gsatt("EFSB", "SEEN", 0); |
| | 1104 | |
| | 1105 | |
| | 1106 | Float_t xfs1,xfs2,xfs3,yfs1,yfs2,yfs3; |
| | 1107 | xfs1 = -dboxEFSA[0] + dboxFEEBPlaneA[0]; |
| | 1108 | xfs2 = xfs1 + dboxFEEBPlaneA[0] + 0.92 + dboxFEEBPlaneA[0]; |
| | 1109 | xfs3 = xfs2 + dboxFEEBPlaneA[0] + 0.92 + dboxFEEBPlaneA[0]; |
| | 1110 | yfs1 = dboxEFSA[1] - dboxFEEBPlaneA[1]; |
| | 1111 | yfs2 = yfs1 - dboxFEEBPlaneA[1] - 0.95 - dboxFEEBPlaneA[1]; |
| | 1112 | |
| | 1113 | |
| | 1114 | |
| | 1115 | gMC->Gspos("EFBA", 1, "EFSA", xfs1, yfs1, 0., 0, "ONLY"); |
| | 1116 | gMC->Gspos("EFBA", 2, "EFSA", xfs2, yfs1, 0., 0, "ONLY"); |
| | 1117 | gMC->Gspos("EFBA", 3, "EFSA", xfs3, yfs1, 0., 0, "ONLY"); |
| | 1118 | gMC->Gspos("EFBA", 4, "EFSA", xfs1, yfs2, 0., 0, "ONLY"); |
| | 1119 | gMC->Gspos("EFBA", 5, "EFSA", xfs2, yfs2, 0., 0, "ONLY"); |
| | 1120 | gMC->Gspos("EFBA", 6, "EFSA", xfs3, yfs2, 0., 0, "ONLY"); |
| | 1121 | |
| | 1122 | |
| | 1123 | //Type B positioning |
| | 1124 | |
| | 1125 | xfs1 = -dboxEFSB[0] + dboxFEEBPlaneB[0]; |
| | 1126 | xfs2 = xfs1 + dboxFEEBPlaneB[0] + 0.938 + dboxFEEBPlaneB[0]; |
| | 1127 | yfs1 = dboxEFSB[1] - dboxFEEBPlaneB[1]; |
| | 1128 | yfs2 = yfs1 - dboxFEEBPlaneB[1] - 1.05 - dboxFEEBPlaneB[1]; |
| | 1129 | yfs3 = yfs2 - dboxFEEBPlaneB[1] - 1.05 - dboxFEEBPlaneB[1]; |
| | 1130 | |
| | 1131 | |
| | 1132 | |
| | 1133 | gMC->Gspos("EFBB", 1, "EFSB", xfs1, yfs1, 0., 0, "ONLY"); |
| | 1134 | gMC->Gspos("EFBB", 2, "EFSB", xfs2, yfs1, 0., 0, "ONLY"); |
| | 1135 | gMC->Gspos("EFBB", 3, "EFSB", xfs1, yfs2, 0., 0, "ONLY"); |
| | 1136 | gMC->Gspos("EFBB", 4, "EFSB", xfs2, yfs2, 0., 0, "ONLY"); |
| | 1137 | gMC->Gspos("EFBB", 5, "EFSB", xfs1, yfs3, 0., 0, "ONLY"); |
| | 1138 | gMC->Gspos("EFBB", 6, "EFSB", xfs2, yfs3, 0., 0, "ONLY"); |
| | 1139 | |
| | 1140 | |
| | 1141 | } |
| | 1142 | |
| | 1143 | //_____________________________________________________________________________ |
| | 1144 | |
| | 1145 | void AliPMDv1::CreatePMD() |
| | 1146 | { |
| | 1147 | // |
| | 1148 | // Create final detector from supermodules |
| | 1149 | // -- Author : Bedanga and Viyogi June 2003 |
| | 1150 | |
| | 1151 | Float_t zp; |
| | 1152 | Int_t jhrot12,jhrot13, irotdm; |
| | 1153 | Int_t *idtmed = fIdtmed->GetArray()-599; |
| | 1154 | |
| | 1155 | //VOLUMES Names : begining with "E" for all PMD volumes, |
| | 1156 | |
| | 1157 | // --- DEFINE Iron volumes for SM A |
| | 1158 | // Fe Support |
| | 1159 | Float_t dboxFea[3]; |
| | 1160 | dboxFea[0] = fSMLengthax; |
| | 1161 | dboxFea[1] = fSMLengthay; |
| | 1162 | dboxFea[2] = fgkThSteel/2.; |
| | 1163 | |
| | 1164 | gMC->Gsvolu("EFEA","BOX", idtmed[618], dboxFea, 3); |
| | 1165 | gMC->Gsatt ("EFEA", "SEEN", 0); |
| | 1166 | |
| | 1167 | // --- DEFINE Iron volumes for SM B |
| | 1168 | |
| | 1169 | // Fe Support |
| | 1170 | Float_t dboxFeb[3]; |
| | 1171 | dboxFeb[0] = fSMLengthbx; |
| | 1172 | dboxFeb[1] = fSMLengthby; |
| | 1173 | dboxFeb[2] = fgkThSteel/2.; |
| | 1174 | |
| | 1175 | gMC->Gsvolu("EFEB","BOX", idtmed[618], dboxFeb, 3); |
| | 1176 | gMC->Gsatt ("EFEB", "SEEN", 0); |
| | 1177 | |
| | 1178 | AliMatrix(irotdm, 90., 0., 90., 90., 180., 0.); |
| | 1179 | AliMatrix(jhrot12, 90., 180., 90., 270., 0., 0.); |
| | 1180 | AliMatrix(jhrot13, 90., 240., 90., 330., 0., 0.); |
| | 1181 | |
| | 1182 | // Gaspmd, the dimension of RECTANGULAR mother volume of PMD, |
| | 1183 | // Four mother volumes EPM1,EPM2 for A-type and |
| | 1184 | // volumes EPM3 and EPM4 for B-type. Four to create a hole |
| | 1185 | // and avoid overlap with beam pipe |
| | 1186 | |
| | 1187 | Float_t gaspmd[3]; |
| | 1188 | gaspmd[0] = fSMLengthax; |
| | 1189 | gaspmd[1] = fSMLengthay; |
| | 1190 | gaspmd[2] = fSMthick; |
| | 1191 | |
| | 1192 | gMC->Gsvolu("EPM1", "BOX", idtmed[698], gaspmd, 3); |
| | 1193 | gMC->Gsatt("EPM1", "SEEN", 1); |
| | 1194 | gMC->Gsvolu("EPM2", "BOX", idtmed[698], gaspmd, 3); |
| | 1195 | gMC->Gsatt("EPM2", "SEEN", 1); |
| | 1196 | |
| | 1197 | //Complete detector for Type A |
| | 1198 | //Position Super modules type A for both CPV and PMD in EPMD |
| | 1199 | Float_t zpsa,zpba,zfea,zcva,zfee; |
| | 1200 | |
| | 1201 | // zpsa = - gaspmd[2] + fSMthick/2.; |
| | 1202 | // -2.5 is given to place PMD at -361.5 |
| | 1203 | // BM : In future after putting proper electronics |
| | 1204 | // -2.5 will be replaced by -gaspmd[2] |
| | 1205 | |
| | 1206 | //TYPE A |
| | 1207 | //Fee board |
| | 1208 | zfee=-gaspmd[2] + 1.2; |
| | 1209 | gMC->Gspos("EFSA", 1, "EPM1", 0., 0., zfee, 0, "ONLY"); |
| | 1210 | gMC->Gspos("EFSA", 2, "EPM2", 0., 0., zfee, jhrot12, "ONLY"); |
| | 1211 | //VETO |
| | 1212 | zcva = zfee + 1.2 + fDthick; |
| | 1213 | gMC->Gspos("EMVA", 1, "EPM1", 0., 0., zcva, 0, "ONLY"); |
| | 1214 | gMC->Gspos("EMVA", 2, "EPM2", 0., 0., zcva, jhrot12, "ONLY"); |
| | 1215 | //Iron support |
| | 1216 | zfea = zcva + fDthick + fgkThSteel/2.; |
| | 1217 | gMC->Gspos("EFEA", 1, "EPM1", 0., 0., zfea, 0, "ONLY"); |
| | 1218 | gMC->Gspos("EFEA", 2, "EPM2", 0., 0., zfea, 0, "ONLY"); |
| | 1219 | //Lead |
| | 1220 | zpba=zfea+fgkThSteel/2.+ fgkThLead/2.; |
| | 1221 | gMC->Gspos("ESPA", 1, "EPM1", 0., 0., zpba, 0, "ONLY"); |
| | 1222 | gMC->Gspos("ESPA", 2, "EPM2", 0., 0., zpba, 0, "ONLY"); |
| | 1223 | //Preshower |
| | 1224 | zpsa = zpba + fgkThLead/2. + fDthick; |
| | 1225 | gMC->Gspos("ESMA", 1, "EPM1", 0., 0., zpsa, 0, "ONLY"); |
| | 1226 | gMC->Gspos("ESMA", 2, "EPM2", 0., 0., zpsa, jhrot12, "ONLY"); |
| | 1227 | //FEE boards |
| | 1228 | zfee=zpsa + fDthick + 1.2; |
| | 1229 | gMC->Gspos("EFSA", 3, "EPM1", 0., 0., zfee, 0, "ONLY"); |
| | 1230 | gMC->Gspos("EFSA", 4, "EPM2", 0., 0., zfee, jhrot12, "ONLY"); |
| | 1231 | |
| | 1232 | |
| | 1233 | //TYPE - B |
| | 1234 | gaspmd[0] = fSMLengthbx; |
| | 1235 | gaspmd[1] = fSMLengthby; |
| | 1236 | gaspmd[2] = fSMthick; |
| | 1237 | |
| | 1238 | gMC->Gsvolu("EPM3", "BOX", idtmed[698], gaspmd, 3); |
| | 1239 | gMC->Gsatt("EPM3", "SEEN", 1); |
| | 1240 | gMC->Gsvolu("EPM4", "BOX", idtmed[698], gaspmd, 3); |
| | 1241 | gMC->Gsatt("EPM4", "SEEN", 1); |
| | 1242 | |
| | 1243 | //Complete detector for Type B |
| | 1244 | //Position Super modules type B for both CPV and PMD in EPMD |
| | 1245 | Float_t zpsb,zpbb,zfeb,zcvb; |
| | 1246 | // zpsb = - gaspmd[2] + fSMthick/2.; |
| | 1247 | // -2.5 is given to place PMD at -361.5 |
| | 1248 | // BM: In future after putting proper electronics |
| | 1249 | // -2.5 will be replaced by -gaspmd[2] |
| | 1250 | |
| | 1251 | //Fee board |
| | 1252 | zfee=-gaspmd[2] + 1.2; |
| | 1253 | gMC->Gspos("EFSB", 5, "EPM3", 0., 0., zfee, 0, "ONLY"); |
| | 1254 | gMC->Gspos("EFSB", 6, "EPM4", 0., 0., zfee, jhrot12, "ONLY"); |
| | 1255 | //VETO |
| | 1256 | zcvb= zfee + 1.2 + fDthick; |
| | 1257 | gMC->Gspos("EMVB", 3, "EPM3", 0., 0., zcvb, 0, "ONLY"); |
| | 1258 | gMC->Gspos("EMVB", 4, "EPM4", 0., 0., zcvb, jhrot12, "ONLY"); |
| | 1259 | |
| | 1260 | //IRON SUPPORT |
| | 1261 | zfeb= zcvb + fDthick + fgkThSteel/2.; |
| | 1262 | gMC->Gspos("EFEB", 3, "EPM3", 0., 0., zfeb, 0, "ONLY"); |
| | 1263 | gMC->Gspos("EFEB", 4, "EPM4", 0., 0., zfeb, 0, "ONLY"); |
| | 1264 | //LEAD |
| | 1265 | zpbb= zfeb + fgkThSteel/2.+ fgkThLead/2.; |
| | 1266 | gMC->Gspos("ESPB", 3, "EPM3", 0., 0., zpbb, 0, "ONLY"); |
| | 1267 | gMC->Gspos("ESPB", 4, "EPM4", 0., 0., zpbb, 0, "ONLY"); |
| | 1268 | //PRESHOWER |
| | 1269 | zpsb = zpbb + fgkThLead/2.+ fDthick; |
| | 1270 | gMC->Gspos("ESMB", 3, "EPM3", 0., 0., zpsb, 0, "ONLY"); |
| | 1271 | gMC->Gspos("ESMB", 4, "EPM4", 0., 0., zpsb, jhrot12, "ONLY"); |
| | 1272 | //FEE boards |
| | 1273 | zfee=zpsb + fDthick + 1.2; |
| | 1274 | gMC->Gspos("EFSB", 7, "EPM3", 0., 0., zfee, 0, "ONLY"); |
| | 1275 | gMC->Gspos("EFSB", 8, "EPM4", 0., 0., zfee, jhrot12, "ONLY"); |
| | 1276 | |
| | 1277 | |
| | 1278 | // --- Place the EPMD in ALICE |
| | 1279 | //Z-distance of PMD from Interaction Point |
| | 1280 | zp = fgkZdist; |
| | 1281 | |
| | 1282 | //X and Y-positions of the PMD planes |
| | 1283 | Float_t xfinal,yfinal; |
| | 1284 | Float_t xsmb,ysmb; |
| | 1285 | Float_t xsma,ysma; |
| | 1286 | |
| | 1287 | xfinal = fSMLengthax + 0.48/2 + fSMLengthbx; |
| | 1288 | yfinal = fSMLengthay + 0.20/2 + fSMLengthby; |
| | 1289 | |
| | 1290 | |
| | 1291 | xsma = xfinal - fSMLengthax; |
| | 1292 | ysma = yfinal - fSMLengthay; |
| | 1293 | xsmb = -xfinal + fSMLengthbx; |
| | 1294 | ysmb = yfinal - fSMLengthby; |
| | 1295 | |
| | 1296 | |
| | 1297 | //Position Full PMD in ALICE |
| | 1298 | // |
| | 1299 | // EPM1 EPM3 |
| | 1300 | // |
| | 1301 | // EPM4 EPM2 |
| | 1302 | // (rotated (rotated EPM1) |
| | 1303 | // EPM3) |
| | 1304 | // |
| | 1305 | gMC->Gspos("EPM1", 1, "ALIC", xsma,ysma,zp, 0, "ONLY"); |
| | 1306 | gMC->Gspos("EPM2", 1, "ALIC", -xsma,-ysma,zp, 0, "ONLY"); |
| | 1307 | gMC->Gspos("EPM3", 1, "ALIC", xsmb,ysmb,zp, 0, "ONLY"); |
| | 1308 | gMC->Gspos("EPM4", 1, "ALIC", -xsmb,-ysmb,zp, 0, "ONLY"); |
| | 1309 | } |
| | 1310 | |
| | 1311 | |
| | 1312 | //_____________________________________________________________________________ |
| | 1313 | void AliPMDv1::DrawModule() const |
| | 1314 | { |
| | 1315 | // Draw a shaded view of the Photon Multiplicity Detector |
| | 1316 | // |
| | 1317 | // cout << " Inside Draw Modules " << endl; |
| | 1318 | |
| | 1319 | gMC->Gsatt("*", "seen", -1); |
| | 1320 | gMC->Gsatt("alic", "seen", 0); |
| | 1321 | // |
| | 1322 | // Set the visibility of the components |
| | 1323 | // |
| | 1324 | gMC->Gsatt("ECAR","seen",0); |
| | 1325 | gMC->Gsatt("ECCU","seen",1); |
| | 1326 | gMC->Gsatt("EST1","seen",1); |
| | 1327 | gMC->Gsatt("EST2","seen",1); |
| | 1328 | gMC->Gsatt("EUM1","seen",1); |
| | 1329 | gMC->Gsatt("EUM2","seen",1); |
| | 1330 | gMC->Gsatt("ESMA","seen",1); |
| | 1331 | gMC->Gsatt("EPMD","seen",1); |
| | 1332 | // |
| | 1333 | gMC->Gdopt("hide", "on"); |
| | 1334 | gMC->Gdopt("shad", "on"); |
| | 1335 | gMC->Gsatt("*", "fill", 7); |
| | 1336 | gMC->SetClipBox("."); |
| | 1337 | gMC->SetClipBox("*", 0, 3000, -3000, 3000, -6000, 6000); |
| | 1338 | gMC->DefaultRange(); |
| | 1339 | gMC->Gdraw("alic", 40, 30, 0, 22, 20.5, .02, .02); |
| | 1340 | gMC->Gdhead(1111, "Photon Multiplicity Detector Version 1"); |
| | 1341 | |
| | 1342 | //gMC->Gdman(17, 5, "MAN"); |
| | 1343 | gMC->Gdopt("hide", "off"); |
| | 1344 | |
| | 1345 | AliDebug(1,"Outside Draw Modules"); |
| | 1346 | } |
| | 1347 | |
| | 1348 | //_____________________________________________________________________________ |
| | 1349 | void AliPMDv1::CreateMaterials() |
| | 1350 | { |
| | 1351 | // Create materials for the PMD |
| | 1352 | // |
| | 1353 | // ORIGIN : Y. P. VIYOGI |
| | 1354 | // |
| | 1355 | // cout << " Inside create materials " << endl; |
| | 1356 | |
| | 1357 | Int_t *idtmed = fIdtmed->GetArray()-599; |
| | 1358 | Int_t isxfld = gAlice->Field()->Integ(); |
| | 1359 | Float_t sxmgmx = gAlice->Field()->Max(); |
| | 1360 | |
| | 1361 | // --- Define the various materials for GEANT --- |
| | 1362 | |
| | 1363 | AliMaterial(1, "Pb $", 207.19, 82., 11.35, .56, 18.5); |
| | 1364 | |
| | 1365 | // Argon |
| | 1366 | |
| | 1367 | Float_t dAr = 0.001782; // --- Ar density in g/cm3 --- |
| | 1368 | Float_t x0Ar = 19.55 / dAr; |
| | 1369 | AliMaterial(2, "Argon$", 39.95, 18., dAr, x0Ar, 6.5e4); |
| | 1370 | |
| | 1371 | // --- CO2 --- |
| | 1372 | |
| | 1373 | Float_t aCO2[2] = { 12.,16. }; |
| | 1374 | Float_t zCO2[2] = { 6.,8. }; |
| | 1375 | Float_t wCO2[2] = { 1.,2. }; |
| | 1376 | Float_t dCO2 = 0.001977; |
| | 1377 | AliMixture(3, "CO2 $", aCO2, zCO2, dCO2, -2, wCO2); |
| | 1378 | |
| | 1379 | AliMaterial(4, "Al $", 26.98, 13., 2.7, 8.9, 18.5); |
| | 1380 | |
| | 1381 | // ArCO2 |
| | 1382 | |
| | 1383 | Float_t aArCO2[3] = {39.948,12.0107,15.9994}; |
| | 1384 | Float_t zArCO2[3] = {18.,6.,8.}; |
| | 1385 | Float_t wArCO2[3] = {0.7,0.08,0.22}; |
| | 1386 | Float_t dArCO2 = dAr * 0.7 + dCO2 * 0.3; |
| | 1387 | AliMixture(5, "ArCO2$", aArCO2, zArCO2, dArCO2, 3, wArCO2); |
| | 1388 | |
| | 1389 | AliMaterial(6, "Fe $", 55.85, 26., 7.87, 1.76, 18.5); |
| | 1390 | |
| | 1391 | // G10 |
| | 1392 | |
| | 1393 | Float_t aG10[4]={1.,12.011,15.9994,28.086}; |
| | 1394 | Float_t zG10[4]={1.,6.,8.,14.}; |
| | 1395 | Float_t wG10[4]={0.15201,0.10641,0.49444,0.24714}; |
| | 1396 | AliMixture(8,"G10",aG10,zG10,1.7,4,wG10); |
| | 1397 | |
| | 1398 | AliMaterial(15, "Cu $", 63.54, 29., 8.96, 1.43, 15.); |
| | 1399 | |
| | 1400 | // Steel |
| | 1401 | Float_t aSteel[4] = { 55.847,51.9961,58.6934,28.0855 }; |
| | 1402 | Float_t zSteel[4] = { 26.,24.,28.,14. }; |
| | 1403 | Float_t wSteel[4] = { .715,.18,.1,.005 }; |
| | 1404 | Float_t dSteel = 7.88; |
| | 1405 | AliMixture(19, "STAINLESS STEEL$", aSteel, zSteel, dSteel, 4, wSteel); |
| | 1406 | |
| | 1407 | //Air |
| | 1408 | |
| | 1409 | Float_t aAir[4]={12.0107,14.0067,15.9994,39.948}; |
| | 1410 | Float_t zAir[4]={6.,7.,8.,18.}; |
| | 1411 | Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827}; |
| | 1412 | Float_t dAir1 = 1.20479E-10; |
| | 1413 | Float_t dAir = 1.20479E-3; |
| | 1414 | AliMixture(98, "Vacum$", aAir, zAir, dAir1, 4, wAir); |
| | 1415 | AliMixture(99, "Air $", aAir, zAir, dAir , 4, wAir); |
| | 1416 | |
| | 1417 | // Define tracking media |
| | 1418 | AliMedium(1, "Pb conv.$", 1, 0, 0, isxfld, sxmgmx, 1., .1, .01, .1); |
| | 1419 | AliMedium(4, "Al $", 4, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1); |
| | 1420 | AliMedium(5, "ArCO2 $", 5, 1, 0, isxfld, sxmgmx, .1, .1, .10, .1); |
| | 1421 | AliMedium(6, "Fe $", 6, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1); |
| | 1422 | AliMedium(8, "G10plate$", 8, 0, 0, isxfld, sxmgmx, 1., .1, .01, .1); |
| | 1423 | AliMedium(15, "Cu $", 15, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1); |
| | 1424 | AliMedium(19, "S steel$", 19, 0, 0, isxfld, sxmgmx, 1., .1, .01, .1); |
| | 1425 | AliMedium(98, "Vacuum $", 98, 0, 0, isxfld, sxmgmx, 1., .1, .10, 10); |
| | 1426 | AliMedium(99, "Air gaps$", 99, 0, 0, isxfld, sxmgmx, 1., .1, .10, .1); |
| | 1427 | |
| | 1428 | // --- Generate explicitly delta rays in the iron, aluminium and lead --- |
| | 1429 | gMC->Gstpar(idtmed[600], "LOSS", 3.); |
| | 1430 | gMC->Gstpar(idtmed[600], "DRAY", 1.); |
| | 1431 | |
| | 1432 | gMC->Gstpar(idtmed[603], "LOSS", 3.); |
| | 1433 | gMC->Gstpar(idtmed[603], "DRAY", 1.); |
| | 1434 | |
| | 1435 | gMC->Gstpar(idtmed[604], "LOSS", 3.); |
| | 1436 | gMC->Gstpar(idtmed[604], "DRAY", 1.); |
| | 1437 | |
| | 1438 | gMC->Gstpar(idtmed[605], "LOSS", 3.); |
| | 1439 | gMC->Gstpar(idtmed[605], "DRAY", 1.); |
| | 1440 | |
| | 1441 | gMC->Gstpar(idtmed[607], "LOSS", 3.); |
| | 1442 | gMC->Gstpar(idtmed[607], "DRAY", 1.); |
| | 1443 | |
| | 1444 | // --- Energy cut-offs in the Pb and Al to gain time in tracking --- |
| | 1445 | // --- without affecting the hit patterns --- |
| | 1446 | gMC->Gstpar(idtmed[600], "CUTGAM", 1e-4); |
| | 1447 | gMC->Gstpar(idtmed[600], "CUTELE", 1e-4); |
| | 1448 | gMC->Gstpar(idtmed[600], "CUTNEU", 1e-4); |
| | 1449 | gMC->Gstpar(idtmed[600], "CUTHAD", 1e-4); |
| | 1450 | |
| | 1451 | gMC->Gstpar(idtmed[605], "CUTGAM", 1e-4); |
| | 1452 | gMC->Gstpar(idtmed[605], "CUTELE", 1e-4); |
| | 1453 | gMC->Gstpar(idtmed[605], "CUTNEU", 1e-4); |
| | 1454 | gMC->Gstpar(idtmed[605], "CUTHAD", 1e-4); |
| | 1455 | |
| | 1456 | gMC->Gstpar(idtmed[603], "CUTGAM", 1e-4); |
| | 1457 | gMC->Gstpar(idtmed[603], "CUTELE", 1e-4); |
| | 1458 | gMC->Gstpar(idtmed[603], "CUTNEU", 1e-4); |
| | 1459 | gMC->Gstpar(idtmed[603], "CUTHAD", 1e-4); |
| | 1460 | // gMC->Gstpar(idtmed[609], "CUTGAM", 1e-4); |
| | 1461 | // gMC->Gstpar(idtmed[609], "CUTELE", 1e-4); |
| | 1462 | // gMC->Gstpar(idtmed[609], "CUTNEU", 1e-4); |
| | 1463 | // gMC->Gstpar(idtmed[609], "CUTHAD", 1e-4); |
| | 1464 | // --- Prevent particles stopping in the gas due to energy cut-off --- |
| | 1465 | gMC->Gstpar(idtmed[604], "CUTGAM", 1e-5); |
| | 1466 | gMC->Gstpar(idtmed[604], "CUTELE", 1e-5); |
| | 1467 | gMC->Gstpar(idtmed[604], "CUTNEU", 1e-5); |
| | 1468 | gMC->Gstpar(idtmed[604], "CUTHAD", 1e-5); |
| | 1469 | gMC->Gstpar(idtmed[604], "CUTMUO", 1e-5); |
| | 1470 | |
| | 1471 | AliDebug(1,"Outside create materials"); |
| | 1472 | |
| | 1473 | } |
| | 1474 | |
| | 1475 | //_____________________________________________________________________________ |
| | 1476 | void AliPMDv1::Init() |
| | 1477 | { |
| | 1478 | // |
| | 1479 | // Initialises PMD detector after it has been built |
| | 1480 | // |
| | 1481 | |
| | 1482 | // |
| | 1483 | AliDebug(2,"Inside Init"); |
| | 1484 | AliDebug(2,"PMD simulation package (v1) initialised"); |
| | 1485 | AliDebug(2,"parameters of pmd"); |
| | 1486 | AliDebug(2,Form("%10.2f %10.2f %10.2f %10.2f\n", |
| | 1487 | fgkCellRadius,fgkCellWall,fgkCellDepth,fgkZdist)); |
| | 1488 | Int_t *idtmed = fIdtmed->GetArray()-599; |
| | 1489 | fMedSens=idtmed[605-1]; |
| | 1490 | |
| | 1491 | } |
| | 1492 | |
| | 1493 | //_____________________________________________________________________________ |
| | 1494 | void AliPMDv1::StepManager() |
| | 1495 | { |
| | 1496 | // |
| | 1497 | // Called at each step in the PMD |
| | 1498 | // |
| | 1499 | |
| | 1500 | Int_t copy; |
| | 1501 | Float_t hits[4], destep; |
| | 1502 | Float_t center[3] = {0,0,0}; |
| | 1503 | Int_t vol[10]; |
| | 1504 | // const char *namep; |
| | 1505 | |
| | 1506 | if(gMC->GetMedium() == fMedSens && (destep = gMC->Edep())) { |
| | 1507 | |
| | 1508 | gMC->CurrentVolID(copy); |
| | 1509 | // namep=gMC->CurrentVolName(); |
| | 1510 | // printf("Current vol is %s \n",namep); |
| | 1511 | vol[0]=copy; |
| | 1512 | |
| | 1513 | gMC->CurrentVolOffID(1,copy); |
| | 1514 | //namep=gMC->CurrentVolOffName(1); |
| | 1515 | // printf("Current vol 11 is %s \n",namep); |
| | 1516 | vol[1]=copy; |
| | 1517 | |
| | 1518 | gMC->CurrentVolOffID(2,copy); |
| | 1519 | //namep=gMC->CurrentVolOffName(2); |
| | 1520 | //printf("Current vol 22 is %s \n",namep); |
| | 1521 | vol[2]=copy; |
| | 1522 | |
| | 1523 | // if(strncmp(namep,"EHC1",4))vol[2]=1; |
| | 1524 | |
| | 1525 | gMC->CurrentVolOffID(3,copy); |
| | 1526 | // namep=gMC->CurrentVolOffName(3); |
| | 1527 | //printf("Current vol 33 is %s \n",namep); |
| | 1528 | vol[3]=copy; |
| | 1529 | |
| | 1530 | gMC->CurrentVolOffID(4,copy); |
| | 1531 | // namep=gMC->CurrentVolOffName(4); |
| | 1532 | // printf("Current vol 44 is %s \n",namep); |
| | 1533 | vol[4]=copy; |
| | 1534 | |
| | 1535 | gMC->CurrentVolOffID(5,copy); |
| | 1536 | // namep=gMC->CurrentVolOffName(5); |
| | 1537 | // printf("Current vol 55 is %s \n",namep); |
| | 1538 | vol[5]=copy; |
| | 1539 | |
| | 1540 | gMC->CurrentVolOffID(6,copy); |
| | 1541 | // namep=gMC->CurrentVolOffName(6); |
| | 1542 | // printf("Current vol 66 is %s \n",namep); |
| | 1543 | vol[6]=copy; |
| | 1544 | |
| | 1545 | gMC->CurrentVolOffID(7,copy); |
| | 1546 | // namep=gMC->CurrentVolOffName(7); |
| | 1547 | // printf("Current vol 77 is %s \n",namep); |
| | 1548 | vol[7]=copy; |
| | 1549 | |
| | 1550 | gMC->CurrentVolOffID(8,copy); |
| | 1551 | // namep=gMC->CurrentVolOffName(8); |
| | 1552 | // printf("Current vol 88 is %s \n",namep); |
| | 1553 | vol[8]=copy; |
| | 1554 | |
| | 1555 | |
| | 1556 | gMC->CurrentVolOffID(9,copy); |
| | 1557 | // namep=gMC->CurrentVolOffName(9); |
| | 1558 | // printf("Current vol 99 is %s \n",namep); |
| | 1559 | vol[9]=copy; |
| | 1560 | |
| | 1561 | |
| | 1562 | // printf("volume number %4d %4d %4d %4d %4d %4d %4d %4d %4d %4d %10.3f \n",vol[0],vol[1],vol[2],vol[3],vol[4],vol[5],vol[6],vol[7],vol[8],vol[9],destep*1000000); |
| | 1563 | |
| | 1564 | gMC->Gdtom(center,hits,1); |
| | 1565 | hits[3] = destep*1e9; //Number in eV |
| | 1566 | AddHit(gAlice->GetMCApp()->GetCurrentTrackNumber(), vol, hits); |
| | 1567 | |
| | 1568 | } |
| | 1569 | } |
| | 1570 | |
| | 1571 | |
| | 1572 | //------------------------------------------------------------------------ |
| | 1573 | // Get parameters |
| | 1574 | |
| | 1575 | void AliPMDv1::GetParameters() |
| | 1576 | { |
| | 1577 | // This gives all the parameters of the detector |
| | 1578 | // such as Length of Supermodules, type A, type B, |
| | 1579 | // thickness of the Supermodule |
| | 1580 | // |
| | 1581 | |
| | 1582 | fSMLengthax = 32.7434; |
| | 1583 | //The total length in X is due to the following components |
| | 1584 | // Factor 3 is because of 3 module length in X for this type |
| | 1585 | // fgkNcolUM1*fgkCellRadius (48 x 0.25): Total span of each module in X |
| | 1586 | // fgkCellRadius/2. : There is offset of 1/2 cell |
| | 1587 | // 0.05+0.05 : Insulation gaps etc |
| | 1588 | // fgkSSBoundary (0.3) : Boundary frame |
| | 1589 | // double XA = 3.0*((fgkCellRadius/fgkSqroot3by2*fgkNcolUM1)-(fgkCellRadius*fgkSqroot3*(fgkNcolUM1-1)/6.)+(2.0*fgkGap)+(2.0*fgkGap)+fgkSSBoundary) + (2.0*0.075); |
| | 1590 | |
| | 1591 | fSMLengthbx = 42.5886; |
| | 1592 | //The total length in X is due to the following components |
| | 1593 | // Factor 2 is because of 2 module length in X for this type |
| | 1594 | // fgkNcolUM2*fgkCellRadius (96 x 0.25): Total span of each module in X |
| | 1595 | // fgkCellRadius/2. : There is offset of 1/2 cell |
| | 1596 | // 0.05+0.05 : Insulation gaps etc |
| | 1597 | // fgkSSBoundary (0.3) : Boundary frame |
| | 1598 | //double XB = 2.0*((fgkCellRadius/fgkSqroot3by2*fgkNcolUM2)-(fgkCellRadius*fgkSqroot3*(fgkNcolUM2-1)/6.)+(2.0*fgkGap)+(2.0*fgkGap)+fgkSSBoundary) + 0.075; |
| | 1599 | |
| | 1600 | |
| | 1601 | |
| | 1602 | fSMLengthay = 49.1; |
| | 1603 | //The total length in Y is due to the following components |
| | 1604 | // Factor 2 is because of 2 module length in Y for this type |
| | 1605 | // fgkCellRadius/fgkSqroot3by2)*fgkNrowUM1 (0.25/sqrt3/2 * 96): Total span of each module in Y |
| | 1606 | // of strips |
| | 1607 | // 0.05+0.05 : Insulation gaps etc |
| | 1608 | // fgkSSBoundary (0.3) : Boundary frame |
| | 1609 | // double YA = 2.0*(fgkNrowUM1*fgkCellRadius+fgkCellRadius/2.+(2.0*fgkGap)+(2.0*fgkGap)+fgkSSBoundary) + 0.05; |
| | 1610 | |
| | 1611 | fSMLengthby = 37.675; |
| | 1612 | //The total length in Y is due to the following components |
| | 1613 | // Factor 3 is because of 3 module length in Y for this type |
| | 1614 | // fgkCellRadius/fgkSqroot3by2)*fgkNrowUM2 (0.25/sqrt3/2 * 48): Total span of each module in Y |
| | 1615 | // of strips |
| | 1616 | // 0.05+0.05 : Insulation gaps etc |
| | 1617 | // fgkSSBoundary (0.3) : Boundary frame |
| | 1618 | //double YB = 3.0*((fgkNrowUM2*fgkCellRadius + fgkCellRadius/2.)+(2.0*fgkGap)+(2.0*fgkGap)+fgkSSBoundary) + (2.0*0.05); |
| | 1619 | |
| | 1620 | |
| | 1621 | //Thickness of a pre/veto plane |
| | 1622 | fDthick = fgkThSS/2. +0.15; |
| | 1623 | |
| | 1624 | //Thickness of the PMD ; 2.4 added for FEE boards |
| | 1625 | fSMthick = 2.0*(fgkThSS/2. +0.15) |
| | 1626 | +fgkThSteel/2.+fgkThLead/2.0 + 2.4; |
| | 1627 | |
| | 1628 | |
| | 1629 | |
| | 1630 | } |
| | 1631 | |
git://git.uio.no / u / mrichter / AliRoot.git / blame_incremental