#ifndef ALIITSRESPONSESDD_H
#define ALIITSRESPONSESDD_H
+
+/* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
+ * See cxx source for full Copyright notice */
+
-#include "AliITSresponse.h"
+#include <AliITSresponse.h>
+#include <TArrayF.h>
-class TString;
+/////////////////////////////////////////////////////////////
+// Base settings for the ITS response classes. //
+// The data member of this class are static and set once //
+// for all the modules. //
+/////////////////////////////////////////////////////////////
-// response for SDD
+class AliITSresponseSDD : public AliITSresponse {
+ public:
-class AliITSresponseSDD :
- public AliITSresponse {
-public:
- //
- // Configuration methods
- //
-
- AliITSresponseSDD();
- virtual ~AliITSresponseSDD() {
- // destructor
- }
- AliITSresponseSDD(const AliITSresponseSDD &source); // copy constructor
- AliITSresponseSDD& operator=(const AliITSresponseSDD &source); // ass. op.
-
- virtual void SetMaxAdc(Float_t p1=1024) {
- // Adc-count saturation value
- fMaxAdc=p1;
- }
- virtual Float_t MaxAdc() {
- // Get maximum Adc-count value
- return fMaxAdc;
- }
-
- virtual void SetMagicValue(Float_t p1=900.) {
- // Set maximum Adc-top value
- fTopValue=p1;
- //it was 96.95
- }
- virtual Float_t MagicValue() {
- // Get maximum Adc-top value
- return fTopValue;
- }
-
- virtual void SetDiffCoeff(Float_t p1=2.8,Float_t p2=28.) {
- // Diffusion coefficients
- fDiffCoeff=p1;
- fDiffCoeff1=p2;
- }
- virtual void DiffCoeff(Float_t&diff,Float_t&diff1) {
- // Get diffusion coefficients
- diff = fDiffCoeff;
- diff1 = fDiffCoeff1;
- }
-
- virtual void SetDriftSpeed(Float_t p1=7.5) {
- // Drift velocity
- fDriftSpeed=p1;
- }
- virtual Float_t DriftSpeed() {
- // drift speed
- return fDriftSpeed;
- }
-
- virtual void SetTemperature(Float_t p1=23.) {
- // Temperature
- fTemperature=p1;
- }
- virtual Float_t Temperature() {
- // Get temperature
- return fTemperature;
- }
-
- virtual void SetDataType(const char *data="simulated") {
- // Type of data - real or simulated
- fDataType=data;
- }
- virtual const char *DataType() const {
- // Get data type
- return fDataType.Data();
- }
-
- virtual void SetParamOptions(const char *opt1="same",const char *opt2="same"){
- // Parameters: "same" or read from "file"
- fParam1=opt1; fParam2=opt2;
- }
- virtual void ParamOptions(char *opt1,char *opt2) {
- // options
- strcpy(opt1,fParam1.Data()); strcpy(opt2,fParam2.Data());
- }
-
- virtual void SetNoiseParam(Float_t n=1.75, Float_t b=10.){
- // Noise and baseline
- fNoise=n; fBaseline=b;
- }
- virtual void GetNoiseParam(Float_t &n, Float_t &b) {
- // get noise param
- n=fNoise; b=fBaseline;
- }
+ AliITSresponseSDD();
+ virtual ~AliITSresponseSDD();
- virtual void SetDo10to8(Bool_t bitcomp=kTRUE) {
- // set the option for 10 to 8 bit compression
- fBitComp = bitcomp;
- }
-
- Bool_t Do10to8() {
- // get 10 to 8 compression option
- return fBitComp;
- }
-
- virtual void SetZeroSupp (const char *opt="2D") {
- // Zero-suppression option - could be 1D, 2D or non-ZS
- fOption=opt;
- }
- virtual const char *ZeroSuppOption() const {
- // Get zero-suppression option
- return fOption.Data();
- }
- virtual void SetMinVal(Int_t mv=4) {
- // Min value used in 2D - could be used as a threshold setting
- fMinVal = mv;
- }
- virtual Int_t MinVal() {
- // min val
- return fMinVal;
- }
-
- virtual void SetFilenames(const char *f1="",const char *f2="",const char *f3="") {
- // Set filenames - input, output, parameters ....
- fFileName1=f1; fFileName2=f2; fFileName3=f3;
- }
- virtual void Filenames(char *input,char *baseline,char *param) {
- // Filenames
- strcpy(input,fFileName1.Data()); strcpy(baseline,fFileName2.Data());
- strcpy(param,fFileName3.Data());
- }
-
-
- virtual void SetOutputOption(Bool_t write=kFALSE) {
- // set output option
- fWrite = write;
- }
- Bool_t OutputOption() {
- // output option
- return fWrite;
- }
- //
- // Compression parameters
- virtual void SetCompressParam(Int_t cp[8]);
- void GiveCompressParam(Int_t *x);
-
- //
- // Detector type response methods
- virtual void SetNSigmaIntegration(Float_t p1=4.) {
- // Set number of sigmas over which cluster disintegration is performed
- fNsigmas=p1;
- }
- virtual Float_t NSigmaIntegration() {
- // Get number of sigmas over which cluster disintegration is performed
- return fNsigmas;
- }
- virtual void SetSigmaSpread(Float_t p1, Float_t p2) {
- // Set sigmas of the charge spread function
- }
- virtual void SigmaSpread(Float_t &s1, Float_t &s2) {
- // Get sigmas for the charge spread
- }
-
- virtual Float_t IntPH(Float_t eloss) {
- // Pulse height from scored quantity (eloss)
- return 0.;
- }
- virtual Float_t IntXZ(AliITSsegmentation *) {
- // Charge disintegration
- return 0.;
- }
-
-
-protected:
-
- Int_t fCPar[8]; // Hardware compression parameters
-
- Float_t fNoise; // Noise
- Float_t fBaseline; // Baseline
- Float_t fTopValue; // still unclear to me
- Float_t fTemperature; // Temperature
- Float_t fDriftSpeed; // Drift velocity
-
- Float_t fMaxAdc; // Adc saturation value
- Float_t fDiffCoeff; // Diffusion Coefficient (scaling the time)
- Float_t fDiffCoeff1; // Diffusion Coefficient (constant term)
- Float_t fNsigmas; // Number of sigmas over which charge disintegration
- // is performed
-
- Int_t fZeroSuppFlag; // Zero-suppression flag
- Int_t fMinVal; // Min value used in 2D zero-suppression algo
-
- Bool_t fWrite; // Write option for the compression algorithms
- Bool_t fBitComp; // 10 to 8 bit compression option
-
- TString fOption; // Zero-suppresion option (1D, 2D or none)
- TString fParam1; // Read baselines from file option
- TString fParam2; // Read compression algo thresholds from file
-
- TString fDataType; // data type - real or simulated
- TString fFileName1; // input keys : run, module #
- TString fFileName2; // baseline & noise val or output coded // signal or monitored bgr.
- TString fFileName3; // param values or output coded signal
-
- ClassDef(AliITSresponseSDD,1) // SDD response
-
- };
-#endif
+ virtual void SetElectronics(Int_t p1=1)
+ {fElectronics=p1; /* Electronics: Pascal (1) or OLA (2) */ }
+ virtual Int_t Electronics() const {// Electronics: 1 = Pascal; 2 = OLA
+ return fElectronics;}
+ virtual void SetMaxAdc(Double_t p1) {// Adc-count saturation value
+ fMaxAdc=p1;}
+ virtual Float_t MaxAdc() const {// Get maximum Adc-count value
+ return fMaxAdc;}
+ virtual void SetChargeLoss(Double_t p1) {
+ // Set Linear Charge Loss Steepness // 0.01 for 20%
+ fChargeLoss=p1;}
+ virtual Float_t ChargeLoss() const {// Get Charge Loss Coefficient
+ return fChargeLoss;}
+ virtual void SetDynamicRange(Double_t p1) {// Set Dynamic Range
+ fDynamicRange = p1;}
+ virtual Float_t DynamicRange() const {// Get Dynamic Range
+ return fDynamicRange;}
+ virtual void SetDriftSpeed(Double_t p1) {// Drift velocity
+ fDriftSpeed=p1;}
+ virtual Float_t DriftSpeed() const {// drift speed
+ return fDriftSpeed;}
+ virtual void SetParamOptions(const char *opt1,const char *opt2) {
+ // Parameters: "same" or read from "file"
+ fParam1=opt1; fParam2=opt2;}
+ virtual void ParamOptions(char *opt1,char *opt2) const {// options
+ strcpy(opt1,fParam1.Data()); strcpy(opt2,fParam2.Data());}
+
+ virtual Bool_t Do10to8() const {// get 10 to 8 compression option
+ return fBitComp;}
+ void SetZeroSupp (const char *opt) {
+ // Zero-suppression option - could be 1D, 2D or non-ZS
+ fOption=opt;}
+ const char *ZeroSuppOption() const {// Get zero-suppression option
+ return fOption.Data();}
+ // Detector type response methods
+ virtual void SetNSigmaIntegration(Double_t p1) {
+ // Set number of sigmas over which cluster disintegration is performed
+ fNsigmas=p1;}
+ virtual Float_t NSigmaIntegration() const {
+ // Get number of sigmas over which cluster disintegration is performed
+ return fNsigmas;}
+ virtual void SetNLookUp(Int_t p1);
+ // Get number of intervals in which the gaussian lookup table is divided
+ virtual Int_t GausNLookUp() const {return fNcomps;}
+ virtual Float_t GausLookUp(Int_t i) {
+ if (!fGaus) SetNLookUp(fgkNcompsDefault);
+ if(i<0 || i>=fNcomps) return 0.;return fGaus->At(i);
+ }
+
+ Int_t Convert8to10(Int_t signal) const; //undo 10 to 8 bit SDD compresion
+ void SetJitterError(Float_t jitter=20) {
+ // set Jitter error (20 um for ALICE from beam test measurements 2001)
+ fJitterError=jitter;}
+ Float_t JitterError() const {// set Jitter error
+ return fJitterError;}
+ void SetDo10to8(Bool_t bitcomp=kTRUE) {
+ // set the option for 10 to 8 bit compression
+ fBitComp = bitcomp;}
+ protected:
+ static const Int_t fgkMaxAdcDefault; // default for fMaxAdc
+ static const Float_t fgkDynamicRangeDefault; // default for fDynamicRange
+ static const Float_t fgkfChargeLossDefault; // default for fChargeLoss
+ static const Float_t fgkDiffCoeffDefault; // default for fDiffCoeff
+ static const Float_t fgkDiffCoeff1Default; // default for fDiffCoeff1
+ static const TString fgkParam1Default; // default for fParam1
+ static const TString fgkParam2Default; // default for fParam2
+ static const TString fgkOptionDefault; // default for fOption
+ static const Float_t fgkDriftSpeedDefault; // default for fDriftSpeed
+ static const Float_t fgkNsigmasDefault; //default for fNsigmas
+ static const Int_t fgkNcompsDefault; //default for fNcomps
+
+ Float_t fJitterError; // jitter error
+ Float_t fDynamicRange; // Set Dynamic Range
+ Float_t fChargeLoss; // Set Linear Coefficient for Charge Loss
+ Float_t fDriftSpeed; // Drift velocity
+ Int_t fElectronics; // Electronics
+ Float_t fMaxAdc; // Adc saturation value
+ Float_t fNsigmas; // Number of sigmas over which charge disintegration
+ // is performed
+ TArrayF *fGaus; // Gaussian lookup table for signal generation
+ Int_t fNcomps; // Number of samplings along the gaussian
+ Bool_t fBitComp; // 10 to 8 bit compression option
+ TString fOption; // Zero-suppresion option (1D, 2D or none)
+ TString fParam1; // Read baselines from file option
+ TString fParam2; // Read compression algo thresholds from file
+ private:
+ AliITSresponseSDD(const AliITSresponseSDD &ob); // copy constructor
+ AliITSresponseSDD& operator=(const AliITSresponseSDD & /* source */); // ass. op.
+ ClassDef(AliITSresponseSDD,7) // Base response class
+
+ };
+#endif
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff