* provided "as is" without express or implied warranty. *
**************************************************************************/
-/*
-$Log$
-Revision 1.1 2003/01/20 23:32:49 nilsen
-New ITS geometry. Only a Skeleton for now.
-
-$Id$
-*/
+/* $Id$ */
//////////////////////////////////////////////////////////////////////////////
// //
// //
//////////////////////////////////////////////////////////////////////////////
// See AliITSv11::StepManager().
-#include <Riostream.h>
+// General C/C++ includes
#include <stdio.h>
#include <stdlib.h>
+// General Root includes
+#include <Riostream.h>
#include <TMath.h>
-#include <TGeometry.h>
-#include <TNode.h>
-#include <TTUBE.h>
-#include <TTUBS.h>
-#include <TPCON.h>
-#include <TFile.h> // only required for Tracking function?
-#include <TCanvas.h>
+#include <float.h>
#include <TObjArray.h>
+#include <TClonesArray.h>
#include <TLorentzVector.h>
#include <TObjString.h>
-#include <TClonesArray.h>
-#include <TBRIK.h>
-#include <TSystem.h>
-
-
+// Root Geometry includes
+#include <TGeoManager.h>
+#include <TGeoVolume.h>
+#include <TGeoPcon.h>
+#include <TGeoCone.h>
+#include <TGeoTube.h> // contaings TGeoTubeSeg
+#include <TGeoArb8.h>
+#include <TGeoCompositeShape.h>
+#include <TGeoMatrix.h>
+#include <TGeoNode.h>
+#include <TGeoMaterial.h>
+#include <TGeoMedium.h>
+#include "AliITSv11GeometrySupport.h"
+// General AliRoot includes
#include "AliRun.h"
#include "AliMagF.h"
#include "AliConst.h"
-#include "AliITSGeant3Geometry.h"
-#include "AliITShit.h"
-#include "AliITS.h"
-#include "AliITSv11.h"
-#include "AliITSgeom.h"
+// ITS specific includes
#include "AliITSgeomSPD.h"
#include "AliITSgeomSDD.h"
-#include "AliITSgeomSSD.h"
#include "AliITSDetType.h"
#include "AliITSresponseSPD.h"
#include "AliITSresponseSDD.h"
-#include "AliITSresponseSSD.h"
#include "AliITSsegmentationSPD.h"
#include "AliITSsegmentationSDD.h"
-#include "AliITSsegmentationSSD.h"
#include "AliITSsimulationSPD.h"
#include "AliITSsimulationSDD.h"
-#include "AliITSsimulationSSD.h"
-#include "AliITSClusterFinderSPD.h"
-#include "AliITSClusterFinderSDD.h"
#include "AliITSClusterFinderSSD.h"
-
+#include "AliITSv11.h"
+#include "AliITSv11GeometrySPD.h"
+#include "AliITSv11GeometrySDD.h"
+#include "AliITSv11GeometrySupport.h"
ClassImp(AliITSv11)
-//______________________________________________________________________
-AliITSv11::AliITSv11() : AliITS() {
- ////////////////////////////////////////////////////////////////////////
- // Standard default constructor for the ITS version 11.
- ////////////////////////////////////////////////////////////////////////
-}
-//______________________________________________________________________
-AliITSv11::AliITSv11(const char *title) : AliITS("ITS", title){
- ////////////////////////////////////////////////////////////////////////
- // Standard constructor for the ITS version 11.
- ////////////////////////////////////////////////////////////////////////
-}
-//______________________________________________________________________
-AliITSv11::~AliITSv11() {
- ////////////////////////////////////////////////////////////////////////
- // Standard destructor for the ITS version 11.
- ////////////////////////////////////////////////////////////////////////
-}
-//______________________________________________________________________
-void AliITSv11::Box(const char gnam[3],const TString &dis,
- Double_t dx,Double_t dy,Double_t dz,Int_t med){
- // Interface to TMC->Gsvolu() for ITS bos geometries. Box with faces
- // perpendicular to the axes. It has 3 paramters. See SetScale() for
- // units. Default units are geant 3 [cm].
- // Inputs:
- // const char gnam[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // TString &dis String containging part discription.
- // Double_t dx half-length of box in x-axis
- // Double_t dy half-length of box in y-axis
- // Double_t dz half-length of box in z-axis
- // Int_t med media index number.
- // Output:
- // none.
- // Return.
- // none.
- char name[4];
- Float_t param[3];
-
- param[0] = fScale*dx;
- param[1] = fScale*dy;
- param[2] = fScale*dz;
- name[0] = 'I';
- for(Int_t i=0;i<3;i++) name[i+1] = gnam[i];
- gMC->Gsvolu(name,"BOX ",fidmed[med],param,3);
-}
-//______________________________________________________________________
-void AliITSv11::Trapezoid1(const char gnam[3],const TString &dis,
- Double_t dxn,Double_t dxp,Double_t dy,Double_t dz,
- Int_t med){
- // Interface to TMC->Gsvolu() for ITS TRD1 geometries. Trapezoid with the
- // x dimension varing along z. It has 4 parameters. See SetScale() for
- // units. Default units are geant 3 [cm].
- // Inputs:
- // const char gnam[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // TString &dis String containging part discription.
- // Double_t dxn half-length along x at the z surface positioned
- // at -DZ
- // Double_t dxp half-length along x at the z surface positioned
- // at +DZ
- // Double_t dy half-length along the y-axis
- // Double_t dz half-length along the z-axis
- // Int_t med media index number.
- // Output:
- // none.
- // Return.
- // none.
- char name[4];
- Float_t param[4];
-
- param[0] = fScale*dxn;
- param[1] = fScale*dxp;
- param[2] = fScale*dy;
- param[3] = fScale*dz;
- name[0] = 'I';
- for(Int_t i=0;i<3;i++) name[i+1] = gnam[i];
- gMC->Gsvolu(name,"TRD1",fidmed[med],param,4);
-}
-//______________________________________________________________________
-void AliITSv11::Trapezoid2(const char gnam[3],const TString &dis,Double_t dxn,
- Double_t dxp,Double_t dyn,Double_t dyp,Double_t dz,
- Int_t med){
- // Interface to TMC->Gsvolu() for ITS TRD2 geometries. Trapezoid with the
- // x and y dimension varing along z. It has 5 parameters. See SetScale()
- // for units. Default units are geant 3 [cm].
- // Inputs:
- // const char gnam[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // TString &dis String containging part discription.
- // Double_t dxn half-length along x at the z surface positioned
- // at -DZ
- // Double_t dxp half-length along x at the z surface positioned
- // at +DZ
- // Double_t dyn half-length along x at the z surface positioned
- // at -DZ
- // Double_t dyp half-length along x at the z surface positioned
- // at +DZ
- // Double_t dz half-length along the z-axis
- // Int_t med media index number.
- // Output:
- // none.
- // Return.
- // none.
- char name[4];
- Float_t param[5];
-
- param[0] = fScale*dxn;
- param[1] = fScale*dxp;
- param[2] = fScale*dyn;
- param[3] = fScale*dyp;
- param[4] = fScale*dz;
- name[0] = 'I';
- for(Int_t i=0;i<3;i++) name[i+1] = gnam[i];
- gMC->Gsvolu(name,"TRD2",fidmed[med],param,5);
-}
-//______________________________________________________________________
-void AliITSv11::Trapezoid(const char gnam[3],const TString &dis,Double_t dz,
- Double_t thet,Double_t phi,Double_t h1,Double_t bl1,
- Double_t tl1,Double_t alp1,Double_t h2,Double_t bl2,
- Double_t tl2,Double_t alp2,Int_t med){
- // Interface to TMC->Gsvolu() for ITS TRAP geometries. General Trapezoid,
- // The faces perpendicular to z are trapezia and their centers are not
- // necessarily on a line parallel to the z axis. This shape has 11
- // parameters, but only cosidering that the faces should be planar, only 9
- // are really independent. A check is performed on the user parameters and
- // a message is printed in case of non-planar faces. Ignoring this warning
- // may cause unpredictable effects at tracking time. See SetScale()
- // for units. Default units are geant 3 [cm].
- // Inputs:
- // const char gnam[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // TString &dis String containging part discription.
- // Double_t dz Half-length along the z-asix
- // Double_t thet Polar angle of the line joing the center of the
- // face at -dz to the center of the one at dz
- // [degree].
- // Double_t phi aximuthal angle of the line joing the center of
- // the face at -dz to the center of the one at +dz
- // [degree].
- // Double_t h1 half-length along y of the face at -dz.
- // Double_t bl1 half-length along x of the side at -h1 in y of
- // the face at -dz in z.
- // Double_t tl1 half-length along x of teh side at +h1 in y of
- // the face at -dz in z.
- // Double_t alp1 angle with respect to the y axis from the center
- // of the side at -h1 in y to the cetner of the
- // side at +h1 in y of the face at -dz in z
- // [degree].
- // Double_t h2 half-length along y of the face at +dz
- // Double_t bl2 half-length along x of the side at -h2 in y of
- // the face at +dz in z.
- // Double_t tl2 half-length along x of the side at _h2 in y of
- // the face at +dz in z.
- // Double_t alp2 angle with respect to the y axis from the center
- // of the side at -h2 in y to the center of the
- // side at +h2 in y of the face at +dz in z
- // [degree].
- // Int_t med media index number.
- // Output:
- // none.
- // Return.
- // none.
- char name[4];
- Float_t param[11];
-
- param[0] = fScale*dz;
- param[1] = thet;
- param[2] = phi;
- param[3] = fScale*h1;
- param[4] = fScale*bl1;
- param[5] = fScale*tl1;
- param[6] = alp1;
- param[7] = fScale*h2;
- param[8] = fScale*bl2;
- param[9] = fScale*tl2;
- param[10] = alp2;
- name[0] = 'I';
- for(Int_t i=0;i<3;i++) name[i+1] = gnam[i];
- gMC->Gsvolu(name,"TRAP",fidmed[med],param,11);
-}
-//______________________________________________________________________
-void AliITSv11::Tube(const char gnam[3],const TString &dis,Double_t rmin,
- Double_t rmax,Double_t dz,Int_t med){
- // Interface to TMC->Gsvolu() for ITS TUBE geometries. Simple Tube. It has
- // 3 parameters. See SetScale()
- // for units. Default units are geant 3 [cm].
- // Inputs:
- // const char gnam[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // TString &dis String containging part discription.
- // Double_t rmin Inside Radius.
- // Double_t rmax Outside Radius.
- // Double_t dz half-length along the z-axis
- // Int_t med media index number.
- // Output:
- // none.
- // Return.
- // none.
- char name[4];
- Float_t param[3];
-
- param[0] = fScale*rmin;
- param[1] = fScale*rmax;
- param[2] = fScale*dz;
- name[0] = 'I';
- for(Int_t i=0;i<3;i++) name[i+1] = gnam[i];
- gMC->Gsvolu(name,"TUBE",fidmed[med],param,3);
-}
-//______________________________________________________________________
-void AliITSv11::TubeSegment(const char gnam[3],const TString &dis,
- Double_t rmin,Double_t rmax,Double_t dz,
- Double_t phi1,Double_t phi2,Int_t med){
- // Interface to TMC->Gsvolu() for ITS TUBE geometries. Phi segment of a
- // tube. It has 5 parameters. Phi1 should be smaller than phi2. If this is
- // not the case, the system adds 360 degrees to phi2. See SetScale()
- // for units. Default units are geant 3 [cm].
- // Inputs:
- // const char gnam[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // TString &dis String containging part discription.
- // Double_t rmin Inside Radius.
- // Double_t rmax Outside Radius.
- // Double_t dz half-length along the z-axis
- // Double_t phi1 Starting angle of the segment [degree].
- // Double_t phi2 Ending angle of the segment [degree].
- // Int_t med media index number.
- // Output:
- // none.
- // Return.
- // none.
- char name[4];
- Float_t param[5];
-
- param[0] = fScale*rmin;
- param[1] = fScale*rmax;
- param[2] = fScale*dz;
- param[3] = phi1;
- param[4] = phi2;
- name[0] = 'I';
- for(Int_t i=0;i<3;i++) name[i+1] = gnam[i];
- gMC->Gsvolu(name,"TUBS",fidmed[med],param,5);
-}
-//______________________________________________________________________
-void AliITSv11::Cone(const char gnam[3],const TString &dis,Double_t dz,
- Double_t rmin1,Double_t rmax1,Double_t rmin2,
- Double_t rmax2,Int_t med){
- // Interface to TMC->Gsvolu() for ITS Cone geometries. Conical tube. It
- // has 5 parameters. See SetScale()
- // for units. Default units are geant 3 [cm].
- // Inputs:
- // const char gnam[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // TString &dis String containging part discription.
- // Double_t dz half-length along the z-axis
- // Double_t rmin1 Inside Radius at -dz.
- // Double_t rmax1 Outside Radius at -dz.
- // Double_t rmin2 inside radius at +dz.
- // Double_t rmax2 outside radius at +dz.
- // Int_t med media index number.
- // Output:
- // none.
- // Return.
- // none.
- char name[4];
- Float_t param[5];
-
- param[0] = fScale*dz;
- param[1] = fScale*rmin1;
- param[2] = fScale*rmax1;
- param[3] = fScale*rmin2;
- param[4] = fScale*rmax2;
- name[0] = 'I';
- for(Int_t i=0;i<3;i++) name[i+1] = gnam[i];
- gMC->Gsvolu(name,"CONS",fidmed[med],param,5);
-}
-//______________________________________________________________________
-void AliITSv11::ConeSegment(const char gnam[3],const TString &dis,Double_t dz,
- Double_t rmin1,Double_t rmax1,Double_t rmin2,
- Double_t rmax2,Double_t phi1,Double_t phi2,
- Int_t med){
- // Interface to TMC->Gsvolu() for ITS ConS geometries. One segment of a
- // conical tube. It has 7 parameters. Phi1 should be smaller than phi2. If
- // this is not the case, the system adds 360 degrees to phi2. See
- // SetScale() for units. Default units are geant 3 [cm].
- // Inputs:
- // const char gnam[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // TString &dis String containging part discription.
- // Double_t dz half-length along the z-axis
- // Double_t rmin1 Inside Radius at -dz.
- // Double_t rmax1 Outside Radius at -dz.
- // Double_t rmin2 inside radius at +dz.
- // Double_t rmax2 outside radius at +dz.
- // Double_t phi1 Starting angle of the segment [degree].
- // Double_t phi2 Ending angle of the segment [degree].
- // Int_t med media index number.
- // Output:
- // none.
- // Return.
- // none.
- char name[4];
- Float_t param[7];
-
- param[0] = fScale*dz;
- param[1] = fScale*rmin1;
- param[2] = fScale*rmax1;
- param[3] = fScale*rmin2;
- param[4] = fScale*rmax2;
- param[5] = phi1;
- param[6] = phi2;
- name[0] = 'I';
- for(Int_t i=0;i<3;i++) name[i+1] = gnam[i];
- gMC->Gsvolu(name,"CONS",fidmed[med],param,7);
-}
-//______________________________________________________________________
-void AliITSv11::Sphere(const char gnam[3],const TString &dis,Double_t rmin,
- Double_t rmax,Double_t the1,Double_t the2,Double_t phi1,
- Double_t phi2,Int_t med){
- // Interface to TMC->Gsvolu() for ITS SPHE geometries. Segment of a
- // sphereical shell. It has 6 parameters. See SetScale()
- // for units. Default units are geant 3 [cm].
- // Inputs:
- // const char gnam[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // TString &dis String containging part discription.
- // Double_t rmin Inside Radius.
- // Double_t rmax Outside Radius.
- // Double_t the1 staring polar angle of the shell [degree].
- // Double_t the2 ending polar angle of the shell [degree].
- // Double_t phui staring asimuthal angle of the shell [degree].
- // Double_t phi2 ending asimuthal angle of the shell [degree].
- // Int_t med media index number.
- // Output:
- // none.
- // Return.
- // none.
- char name[4];
- Float_t param[6];
-
- param[0] = fScale*rmin;
- param[1] = fScale*rmax;
- param[2] = the1;
- param[3] = the2;
- param[4] = phi1;
- param[5] = phi2;
- name[0] = 'I';
- for(Int_t i=0;i<3;i++) name[i+1] = gnam[i];
- gMC->Gsvolu(name,"SPHE",fidmed[med],param,6);
-}
-//______________________________________________________________________
-void AliITSv11::Parallelepiped(const char gnam[3],const TString &dis,
- Double_t dx,Double_t dy,Double_t dz,
- Double_t alph,Double_t thet,Double_t phi,
- Int_t med){
- // Interface to TMC->Gsvolu() for ITS PARA geometries. Parallelepiped. It
- // has 6 parameters. See SetScale() for units. Default units are geant 3
- // [cm].
- // Inputs:
- // const char gnam[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // TString &dis String containging part discription.
- // Double_t dx half-length allong x-axis
- // Double_t dy half-length allong y-axis
- // Double_t dz half-length allong z-axis
- // Double_t alpha angle formed by the y axis and by the plane
- // joining the center of teh faces parallel to the
- // z-x plane at -dY and +dy [degree].
- // Double_t thet polar angle of the line joining the centers of
- // the faces at -dz and +dz in z [degree].
- // Double_t phi azimuthal angle of teh line joing the centers of
- // the faaces at -dz and +dz in z [degree].
- // Int_t med media index number.
- // Output:
- // none.
- // Return.
- // none.
- char name[4];
- Float_t param[6];
-
- param[0] = fScale*dx;
- param[1] = fScale*dy;
- param[2] = fScale*dz;
- param[3] = alpha;
- param[4] = thet;
- param[5] = phi;
- name[0] = 'I';
- for(Int_t i=0;i<3;i++) name[i+1] = gnam[i];
- gMC->Gsvolu(name,"PARA",fidmed[med],param,6);
-}
-//______________________________________________________________________
-void AliITSv11::Polygon(const char gnam[3],const TString &dis,Double_t phi1,
- Double_t dphi,Int_t npdv,Int_t nz,Double_t *z,
- Double_t *rmin,Double_t *rmax,Double_t ,Int_t med){
- // Interface to TMC->Gsvolu() for ITS PGON geometry. Polygon It has 10
- // parameters or more. See SetScale() for units. Default units are geant 3
- // [cm].
- // Inputs:
- // const char gnam[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // TString &dis String containging part discription.
- // Double_t phi1 the azimuthal angle at which the volume begins
- // (angles are counted clouterclockwise) [degrees].
- // Double_t dphi opening angle of the volume, which extends from
- // phi1 to phi1+dphi [degree].
- // Int_t npdv the number of sides of teh cross section between
- // the given phi limits.
- // Int_t nz number of planes perpendicular to the z axis
- // where the dimension of the section is given -
- // this number should be at least 2 and NP triples
- // of number must follow.
- // Double_t *z array [nz] of z coordiates of the sections..
- // Double_t *rmin array [nz] of radius of teh circle tangent to
- // the sides of the inner polygon in teh
- // cross-section.
- // Double_t *rmax array [nz] of radius of the circle tangent to
- // the sides of the outer polygon in the
- // cross-section.
- // Int_t med media index number.
- // Output:
- // none.
- // Return.
- // none.
- char name[4];
- Float_t *param;
- Int_t n,i;
-
- n = 4+3*nz;
- param = new Float_t[n]
- param[0] = phi1;
- param[1] = dphi;
- param[2] = (Float_t)npdv;
- param[3] = (Float_t)nz;
- for(i=0;i<nz;i++){
- param[4+3*i] = z[i];
- param[5+3*i] = rmin[i];
- param[6+3*i] = rmax[i];
- } // end for i
- name[0] = 'I';
- for(i=0;i<3;i++) name[i+1] = gnam[i];
- gMC->Gsvolu(name,"PGON",fidmed[med],param,n);
-
- delete[] param;
-}
-//______________________________________________________________________
-void AliITSv11::PolyCone(const char gnam[3],const TString &dis,Double_t phi1,
- Double_t dphi,Int_t nz,Double_t *z,Double_t *rmin,
- Double_t *rmax,Int_t med){
- // Interface to TMC->Gsvolu() for ITS PCON geometry. Poly-cone It has 9
- // parameters or more. See SetScale() for units. Default units are geant 3
- // [cm].
- // Inputs:
- // const char gnam[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // TString &dis String containging part discription.
- // Double_t phi1 the azimuthal angle at which the volume begins
- // (angles are counted clouterclockwise) [degrees].
- // Double_t dphi opening angle of the volume, which extends from
- // phi1 to phi1+dphi [degree].
- // Int_t nz number of planes perpendicular to the z axis
- // where the dimension of the section is given -
- // this number should be at least 2 and NP triples
- // of number must follow.
- // Double_t *z Array [nz] of z coordinate of the section.
- // Double_t *rmin Array [nz] of radius of teh inner circle in the
- // cross-section.
- // Double_t *rmax Array [nz] of radius of the outer circle in the
- // cross-section.
- // Int_t med media index number.
- // Output:
- // none.
- // Return.
- // none.
- char name[4];
- Float_t *param;
- Int_t n,i;
-
- n = 3+3*nz;
- param = new Float_t[n];
- param[0] = phi1;
- param[1] = dphi;
- param[2] = (Float_t) nz;
- for(i=0;i<nz;i++){
- param[3+3*i] = z[i];
- param[4+3*i] = rmin[i];
- param[5+3*i] = rmax[i];
- } // end for i
- name[0] = 'I';
- for(i=0;i<3;i++) name[i+1] = gnam[i];
- gMC->Gsvolu(name,"PCON",fidmed[med],param,n);
-
- delete[] param;
-}
-//______________________________________________________________________
-void AliITSv11::TubeElliptical(const char gnam[3],const TString &dis,
- Double_t p1,Double_t p2,Double_t dz,Int_t med){
- // Interface to TMC->Gsvolu() for ITS ELTU geometries. Elliptical
- // cross-section Tube. It has 3 parameters. See SetScale()
- // for units. Default units are geant 3 [cm]. The equation of the surface
- // is x^2 * p1^-2 + y^2 * p2^-2 = 1.
- // Inputs:
- // const char gnam[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // TString &dis String containging part discription.
- // Double_t p1 semi-axis of the elipse along x.
- // Double_t p2 semi-axis of the elipse along y.
- // Double_t dz half-length along the z-axis
- // Int_t med media index number.
- // Output:
- // none.
- // Return.
- // none.
- char name[4];
- Float_t param[3];
-
- param[0] = fScale*p1;
- param[1] = fScale*p2;
- param[2] = fScale*dz;
- name[0] = 'I';
- for(Int_t i=0;i<3;i++) name[i+1] = gnam[i];
- gMC->Gsvolu(name,"ELTU",fidmed[med],param,3);
-}
-//______________________________________________________________________
-void AliITSv11::HyperbolicTube(const char gnam[3],const TString &dis,
- Double_t rmin,Double_t rmax,Double_t dz,
- Double_t thet,Int_t med){
- // Interface to TMC->Gsvolu() for ITS HYPE geometries. Hyperbolic tube.
- // Fore example the inner and outer surfaces are hyperboloids, as would be
- // foumed by a system of cylinderical wires which were then rotated
- // tangentially about their centers. It has 4 parameters. See SetScale()
- // for units. Default units are geant 3 [cm]. The hyperbolic surfaces are
- // given by r^2 = (ztan(thet)^2 + r(z=0)^2.
- // Inputs:
- // const char gnam[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // TString &dis String containging part discription.
- // Double_t rmin Inner radius at z=0 where tube is narrowest.
- // Double_t rmax Outer radius at z=0 where tube is narrowest.
- // Double_t dz half-length along the z-axis
- // Double_t thet stero angel of rotation of the two faces
- // [degrees].
- // Int_t med media index number.
- // Output:
- // none.
- // Return.
- // none.
- char name[4];
- Float_t param[4];
-
- param[0] = fScale*rmin;
- param[1] = fScale*rmax;
- param[2] = fScale*dz;
- param[3] = thet;
- name[0] = 'I';
- for(Int_t i=0;i<3;i++) name[i+1] = gnam[i];
- gMC->Gsvolu(name,"HYPE",fidmed[med],param,4);
-}
-//______________________________________________________________________
-void AliITSv11::TwistedTrapezoid(const char gnam[3],const TString &dis,
- Double_t dz,Double_t thet,Double_t phi,
- Double_t twist,Double_t h1,Double_t bl1,
- Double_t tl1,Double_t apl1,Double_t h2,
- Double_t bl2,Double_t tl2,Double_t apl2,
- Int_t med){
- // Interface to TMC->Gsvolu() for ITS GTRA geometries. General twisted
- // trapazoid. The faces perpendicular to z are trapazia and their centers
- // are not necessarily on a line parallel to the z axis as the TRAP.
- // Additionally, the faces may be twisted so that none of their edges are
- // parallel. It is a TRAP shape, exept that it is twisted in the x-y plane
- // as a function of z. The parallel sides perpendicular to the x axis are
- // rotated with respect to the x axis by an angle TWIST, which is one of
- // the parameters. The shape is defined by the eight corners and is assumed
- // to be constructed of straight lines joingin points on the boundry of the
- // trapezoidal face at Z=-dz to the coresponding points on the face at
- // z=+dz. Divisions are not allowed. It has 12 parameters. See SetScale()
- // for units. Default units are geant 3 [cm]. Note: This shape suffers from
- // the same limitations than the TRAP. The tracking routines assume that
- // the faces are planar, but htis constraint is not easily expressed in
- // terms of the 12 parameters. Additionally, no check on th efaces is
- // performed in this case. Users should avoid to use this shape as much as
- // possible, and if they have to do so, they should make sure that the
- // faces are really planes. If this is not the case, the result of the
- // trasport is unpredictable. To accelerat ethe computations necessary for
- // trasport, 18 additioanl parameters are calculated for this shape are
- // 1 DXODZ dx/dz of the line joing the centers of the faces at z=+_dz.
- // 2 DYODZ dy/dz of the line joing the centers of the faces at z=+_dz.
- // 3 XO1 x at z=0 for line joing the + on parallel side, perpendicular
- // corners at z=+_dz.
- // 4 YO1 y at z=0 for line joing the + on parallel side, + on
- // perpendicular corners at z=+-dz.
- // 5 DXDZ1 dx/dz for line joing the + on parallel side, + on
- // perpendicular corners at z=+-dz.
- // 6 DYDZ1 dy/dz for line joing the + on parallel side, + on
- // perpendicular corners at z=+-dz.
- // 7 X02 x at z=0 for line joing the - on parallel side, + on
- // perpendicular corners at z=+-dz.
- // 8 YO2 y at z=0 for line joing the - on parallel side, + on
- // perpendicular corners at z=+-dz.
- // 9 DXDZ2 dx/dz for line joing the - on parallel side, + on
- // perpendicular corners at z=+-dz.
- // 10 DYDZ2dy/dz for line joing the - on parallel side, + on
- // perpendicular corners at z=+-dz.
- // 11 XO3 x at z=0 for line joing the - on parallel side, - on
- // perpendicular corners at z=+-dz.
- // 12 YO3 y at z=0 for line joing the - on parallel side, - on
- // perpendicular corners at z=+-dz.
- // 13 DXDZ3 dx/dzfor line joing the - on parallel side, - on
- // perpendicular corners at z=+-dz.
- // 14 DYDZ3 dydz for line joing the - on parallel side, - on
- // perpendicular corners at z=+-dz.
- // 15 XO4 x at z=0 for line joing the + on parallel side, - on
- // perpendicular corners at z=+-dz.
- // 16 YO4 y at z=0 for line joing the + on parallel side, - on
- // perpendicular corners at z=+-dz.
- // 17 DXDZ4 dx/dz for line joing the + on parallel side, - on
- // perpendicular corners at z=+-dz.
- // 18 DYDZ4 dydz for line joing the + on parallel side, - on
- // perpendicular corners at z=+-dz.
- // Inputs:
- // const char gnam[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // TString &dis String containging part discription.
- // Double_t dz half-length along the z axis.
- // Double_t thet polar angle of the line joing the center of the
- // face at -dz to the center of the one at +dz
- // [degrees].
- // Double_t phi Azymuthal angle of teh line joing the centre of
- // the face at -dz to the center of the one at +dz
- // [degrees].
- // Double_t twist Twist angle of the faces parallel to the x-y
- // plane at z=+-dz around an axis parallel to z
- // passing through their centre [degrees].
- // Double_t h1 Half-length along y of the face at -dz.
- // Double_t bl1 half-length along x of the side -h1 in y of the
- // face at -dz in z.
- // Double_t tl1 half-length along x of the side at +h1 in y of
- // the face at -dz in z.
- // Double_t apl1 Angle with respect to the y ais from the center
- // of the side at -h1 in y to the centere of the
- // side at +h1 in y of the face at -dz in z
- // [degrees].
- // Double_t h2 half-length along the face at +dz.
- // Double_t bl2 half-length along x of the side at -h2 in y of
- // the face at -dz in z.
- // Double_t tl2 half-length along x of the side at +h2 in y of
- // the face at +dz in z.
- // Double_t apl2 angle with respect to the y axis from the center
- // of the side at -h2 in y to the center of the side
- // at +h2 in y of the face at +dz in z [degrees].
- // Int_t med media index number.
- // Output:
- // none.
- // Return.
- // none.
- char name[4];
- Float_t param[12];
-
- param[0] = fScale*dz;
- param[1] = thet;
- param[2] = phi;
- param[3] = twist;
- param[4] = fScale*h1;
- param[5] = fScale*bl1;
- param[6] = fScale*tl1;
- param[7] = alp1;
- param[8] = fScale*h2;
- param[9] = fScale*bl2;
- param[10] = fScale*tl2;
- param[11] = alp2;
- name[0] = 'I';
- for(Int_t i=0;i<3;i++) name[i+1] = gnam[i];
- gMC->Gsvolu(name,"GTRA",fidmed[med],param,12);
-}
-//______________________________________________________________________
-void AliITSv11::CutTube(const char gnam[3],const TString &dis,Double_t rmin,
- Double_t rmax,Double_t dz,Double_t phi1,Double_t phi2,
- Double_t lx,Double_t ly,Double_t lz,Double_t hx,
- Double_t hy,Double_t hz,Int_t med){
- // Interface to TMC->Gsvolu() for ITS CTUB geometries. Cut tube. A tube cut
- // at the extremities with planes not necessarily perpendicular tot he z
- // axis. It has 11 parameters. See SetScale() for units. Default units are
- // geant 3 [cm]. phi1 should be smaller than phi2. If this is not the case,
- // the system adds 360 degrees to phi2.
- // Inputs:
- // const char gnam[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // TString &dis String containging part discription.
- // Double_t rmin Inner radius at z=0 where tube is narrowest.
- // Double_t rmax Outer radius at z=0 where tube is narrowest.
- // Double_t dz half-length along the z-axis
- // Double_t dz half-length along the z-axis
- // Double_t phi1 Starting angle of the segment [degree].
- // Double_t phi2 Ending angle of the segment [degree].
- // Double_t lx x component of a unit vector perpendicular to
- // the face at -dz.
- // Double_t ly y component of a unit vector perpendicular to
- // the face at -dz.
- // Double_t lz z component of a unit vector perpendicular to
- // the face at -dz.
- // Double_t hx x component of a unit vector perpendicular to
- // the face at +dz.
- // Double_t hy y component of a unit vector perpendicular to
- // the face at +dz.
- // Double_t hz z component of a unit vector perpendicular to
- // the face at +dz.
- // Int_t med media index number.
- // Output:
- // none.
- // Return.
- // none.
- char name[4];
- Float_t param[11];
+/*
+ Some temparary #define's used untill ROOT has addoppted the proper
+ Getter in it's classes.
+ These Below are for TGeoPcon functions.
+*/
- param[0] = fScale*rmin;
- param[1] = fScale*rmax;
- param[2] = fScale*dz;
- param[3] = phi1;
- param[4] = phi2;
- param[5] = lx;
- param[6] = ly;
- param[7] = lz;
- param[8] = hx;
- param[9] = hy;
- param[10] = hz;
- name[0] = 'I';
- for(Int_t i=0;i<3;i++) name[i+1] = gnam[i];
- gMC->Gsvolu(name,"CTUB",fidmed[med],param,11);
-}
//______________________________________________________________________
-void AliITSv11::Pos(const char vol[3],Int_t cn,const char moth[3],Double_t x,
- Double_t y,Double_t z,Int_t irot){
- // Place a copy of a volume previously defined by a call to GSVOLU inside
- // its mother volulme moth.
+AliITSv11::AliITSv11() :
+ AliITS(),
+ fGeomDetOut(kFALSE),
+ fGeomDetIn(kFALSE),
+ fMajorVersion(11),
+ fMinorVersion(0),
+ fDet1(0.0),
+ fDet2(0.0),
+ fChip1(0.0),
+ fChip2(0.0),
+ fRails(0),
+ fFluid(1),
+ fSPDgeom(0),
+ fSupgeom(0){
+ // Standard default constructor for the ITS version 11.
// Inputs:
- // const char vol[3] 3 character geant volume name. The letter "I"
- // is appended to the front to indecate that this
- // is an ITS volume.
- // const char moth[3] 3 character geant volume name of the mother volume
- // in which vol will be placed. The letter "I" is
- // appended to the front to indecate that this is an
- // ITS volume.
- // Double_t x The x positon of the volume in the mother's
- // reference system
- // Double_t y The y positon of the volume in the mother's
- // reference system
- // Double_t z The z positon of the volume in the mother's
- // reference system
- // Int_t irot the index for the rotation matrix to be used.
- // irot=-1 => unit rotation.
+ // none.
// Outputs:
- // none.
- // Return:
- // none.
- char name[4],mother[4];
- Float_t param[3];
- Int_t r=0,i;
-
- param[0] = x;
- param[1] = y;
- param[2] = z;
- name[0] = 'I';
- for(i=0;i<3;i++) name[i+1] = vol[i];
- mother[0] = 'I';
- for(i=0;i<3;i++) mother[i+1] = moth[i];
- if(irot>=0) r=fidrot[irot];
- fMC->Gspos(name,mother,param[0],param[1],param[2],r,"ONLY");
-}
-//______________________________________________________________________
-void AliITSv11::Matrix(Int_t irot,Double_t thet1,Double_t phi1,
- Double_t thet2,Double_t phi2,
- Double_t thet3,Double_t phi3){
- // Defines a Geant rotation matrix. checks to see if it is the unit
- // matrix. If so, then no additonal matrix is defined. Stores rotation
- // matrix irot in the data structure JROTM. If the matrix is not
- // orthonormal, it will be corrected by setting y' perpendicular to x'
- // and z' = x' X y'. A warning message is printed in this case.
+ // none.
+ // Return
+ // A default constructed AliITSv11 class.
+
+ //fITSV = 0;
+ //fcS = 0;
+// fcD = 0;
+
+ SetEUCLID(kFALSE);
+}
+//______________________________________________________________________
+AliITSv11::AliITSv11(Int_t debugITS,Int_t debugSPD,Int_t debugSDD,
+ Int_t debugSSD,Int_t debugSUP) :
+ AliITS(),
+ fGeomDetOut(kFALSE),
+ fGeomDetIn(kFALSE),
+ fMajorVersion(11),
+ fMinorVersion(0),
+ fDet1(0.0),
+ fDet2(0.0),
+ fChip1(0.0),
+ fChip2(0.0),
+ fRails(0),
+ fFluid(1),
+ fSPDgeom(0),
+ fSupgeom(0){
+ // Standard default constructor for the ITS version 11.
// Inputs:
- // Int_t irot Intex specifing which rotation matrix.
- // Double_t thet1 Polar angle for axisw x [degrees].
- // Double_t phi1 azimuthal angle for axis x [degrees].
- // Double_t thet12Polar angle for axisw y [degrees].
- // Double_t phi2 azimuthal angle for axis y [degrees].
- // Double_t thet3 Polar angle for axisw z [degrees].
- // Double_t phi3 azimuthal angle for axis z [degrees].
+ // Int_t debugITS Debug flag for ITS code (required).
+ // Int_t debugSPD Debug flag for SPD geometry (default = 0).
+ // Int_t debugSDD Debug flag for SDD geometry (default = 0).
+ // Int_t debugSSD Debug flag for SSD geometry (default = 0).
+ // Int_t debugSUP Debug flag for SUPort geometry (default = 0).
// Outputs:
- // none.
- // Return:
- // none.
- Float_t t1,p1,t2,p2,t3,p3;
-
- if(thet1==90.0&&phi1==0.0&&thet2==90.0&&phi2==90.0&&thet3==0.0&&phi3==0.0){
- fidrot[irot] = 0; // Unit matrix
- }else{
- t1 = thet1;
- p1 = phi1;
- t2 = thet2;
- p2 = phi2;
- t3 = thet3;
- p3 = phi3
- AliMatrix(fidrot[irot],t1,p1,t2,p2,t3,p3);
- } // end if
-}
-//______________________________________________________________________
-void AliITSv11::Matrix(Int_t irot,Int_t axis,Double_t thet){
- // Defines a Geant rotation matrix. checks to see if it is the unit
- // matrix. If so, then no additonal matrix is defined. Stores rotation
- // matrix irot in the data structure JROTM. If the matrix is not
- // orthonormal, it will be corrected by setting y' perpendicular to x'
- // and z' = x' X y'. A warning message is printed in this case.
+ // none.
+ // Return
+ // A Constructor for ITS geometry version 11 useful for Geometry display.
+
+ SetEUCLID(kFALSE);
+ debugSSD = debugSDD; // remove waring for unused variables.
+ SetDebug(debugITS);
+ fSPDgeom = new AliITSv11GeometrySPD(debugSPD);
+ fSDDgeom = new AliITSv11GeometrySDD(debugSDD);
+ fSupgeom = new AliITSv11GeometrySupport(debugSUP);
+}
+//______________________________________________________________________
+AliITSv11::AliITSv11(const char *title) :
+ AliITS("ITS", title),
+ fGeomDetOut(kFALSE),
+ fGeomDetIn(kFALSE),
+ fMajorVersion(11),
+ fMinorVersion(0),
+ fDet1(0.0),
+ fDet2(0.0),
+ fChip1(0.0),
+ fChip2(0.0),
+ fRails(0),
+ fFluid(1),
+ fSPDgeom(0),
+ fSupgeom(0){
+ // Standard constructor for the ITS version 11.
// Inputs:
- // Int_t irot Intex specifing which rotation matrix.
- // Int_t axis Axis about which rotation is to be done.
- // Double_t thet Angle to rotate by [degrees].
+ // const char *title The title of for this geometry.
// Outputs:
- // none.
- // Return:
- // none.
-
- if(thet==0.0){
- fidrot[irot] = 0; // Unit matrix
- }else{
- switch (irot) {
- case 0: //Rotate about x-axis, x-axis does not change.
- AliMatrix(fidrot[irot],90.0,0.0,90.0+thet,90.0,thet,90.0);
- break;
- case 1: //Rotate about y-axis, y-axis does not change.
- AliMatrix(fidrot[irot],-90.0-thet,0.0,90.0,90.0,thet,90.0);
- break;
- case 2: //Rotate about z-axis, z-axis does not change.
- AliMatrix(fidrot[irot],90.0,thet,90.0,-thet-90.0,0.0,0.0);
- break;
- default:
- Error("Matrix","axis must be either 0, 1, or 2. for matrix=%d",
- irot);
- break;
- } // end switch
- } // end if
+ // none.
+ // Return
+ // A Standard constructed AliITSv11 class.
+ SetEUCLID(kFALSE);
+ fSPDgeom = new AliITSv11GeometrySPD(GetDebug());
+ fSupgeom = new AliITSv11GeometrySupport(GetDebug());
}
//______________________________________________________________________
-void AliITSv11::Matrix(Int_t irot,Double_t rot[3][3]){
- // Defines a Geant rotation matrix. checks to see if it is the unit
- // matrix. If so, then no additonal matrix is defined. Stores rotation
- // matrix irot in the data structure JROTM. If the matrix is not
- // orthonormal, it will be corrected by setting y' perpendicular to x'
- // and z' = x' X y'. A warning message is printed in this case.
+AliITSv11::~AliITSv11() {
+ // Standard destructor for the ITS version 11.
// Inputs:
- // Int_t irot Intex specifing which rotation matrix.
- // Double_t rot[3][3] The 3 by 3 rotation matrix.
+ // none.
// Outputs:
- // none.
- // Return:
- // none.
-
- if(rot[0][0]==1.0&&rot[1][1]==1.0&&rot[2][2]==1.0&&
- rot[0][1]==0.0&&rot[0][2]==0.0&&rot[1][0]==0.0&&
- rot[1][2]==0.0&&rot[2][0]==0.0&&rot[2][1]==0.0){
- fidrot[irot] = 0; // Unit matrix
- }else{
- Double_t si,c=180./TMath::Pi();
- Double_t ang[6];
-
- ang[1] = TMath::ATan2(rot[0][1],rot[0][0]);
- if(TMath::Cos(ang[1])!=0.0) si = rot[0][0]/TMath::Cos(ang[1]);
- else si = rot[0][1]/TMath::Sin(ang[1]);
- ang[0] = TMath::ATan2(si,rot[0][2]);
-
- ang[3] = TMath::ATan2(rot[1][1],rot[1][0]);
- if(TMath::Cos(ang[3])!=0.0) si = rot[1][0]/TMath::Cos(ang[3]);
- else si = rot[1][1]/TMath::Sin(ang[3]);
- ang[2] = TMath::ATan2(si,rot[1][2]);
-
- ang[5] = TMath::ATan2(rot[2][1],rot[2][0]);
- if(TMath::Cos(ang[5])!=0.0) si = rot[2][0]/TMath::Cos(ang[5]);
- else si = rot[2][1]/TMath::Sin(ang[5]);
- ang[4] = TMath::ATan2(si,rot[2][2]);
+ // none.
+ // Return
+ // none.
- for(Int_t i=0;i<6;i++) {ang[i] *= c; if(ang[i]<0.0) ang[i] += 360.;}
- AliMatrix(fidrot[irot],ang[0],ang[1],ang[2],ang[3],ang[4],ang[5]);
- } // end if
+// if(fITSV!=0) delete fITSV;
+// if(fcS!=0) delete fcS;
+// if(fcD!=0) delete fcD;
}
//______________________________________________________________________
-Float_t AliITSv11::GetA(Int_t z){
- // Returns the isotopicaly averaged atomic number.
+AliITSv11::AliITSv11(const AliITSv11 &source) : AliITS(source){
+ // Copy Constructor for ITS version 11.
// Inputs:
- // Int_t z Elemental number
+ // AliITSv11 &source class to be copied from.
// Outputs:
- // none.
- // Return:
- // The atomic mass number.
- const Float_t A[]={ 1.00794 , 4.0026902, 6.941 , 9.012182 , 10.811 ,
- 12.01007 , 14.00674 , 15.9994 , 18.9984032, 20.1797 ,
- 22.98970 , 24.3050 , 26.981538, 28.0855 , 30.973761,
- 32.066 , 35.4527 , 39.948 , 39.0983 , 40.078 ,
- 44.95591 , 47.867 , 50.9415 , 51.9961 , 54.938049,
- 55.845 , 58.933200 , 58.6934 , 63.546 , 65.39 ,
- 69.723 , 72.61 , 74.92160 , 78.96 , 79.904 ,
- 83.80 , 85.4678 , 87.62 , 88.9085 , 91.224 ,
- 92.90638 , 95.94 , 97.907215, 101.07 ,102.90550 ,
- 106.42 ,107.8682 ,112.411 ,114.818 ,118.710 ,
- 121.760 ,127.60 ,126.90447 ,131.29 ,132.90545 ,
- 137.327 ,138.9055 ,140.116 ,140.90765 ,144.24 ,
- 144.912746,150.36 ,151.964 ,157.25 ,158.92534 ,
- 162.50 ,164.93032 ,167.26 ,168.93421 ,173.04 ,
- 174.967 ,178.49 ,180.9479 ,183.84 ,186.207 ,
- 190.23 ,192.217 ,195.078 ,196.96655 ,200.59 ,
- 204.3833 ,207.2 ,208.98038,208.982415 ,209.987131,
- 222.017570 ,223.019731,226.025402,227.027747 ,232.0381 ,
- 231.03588 238.0289};
+ // none.
+ // Return
+ // none.
- if(z<1||z>92){
- Error("GetA","z must be 0<z<93. z=%d",z);
- return 0.0;
- } // end if
- return A[z-1];
+ if(&source == this) return;
+ Error("Copy Constructor","Not allowed to copy AliITSv11");
+ return;
}
//______________________________________________________________________
-Float_t AliITSv11::GetStandardMaxStepSize(Int_t istd){
- // Returns one of a set of standard Maximum Step Size values.
+AliITSv11& AliITSv11::operator=(const AliITSv11 &source){
+ // Assignment operator for the ITS version 11.
// Inputs:
- // Int_t istd Index to indecate which standard.
+ // AliITSv11 &source class to be copied from.
// Outputs:
- // none.
- // Return:
- // The appropreate standard Maximum Step Size value [cm].
- Float_t t[]={1.0, // default
- 0.0075, // Silicon detectors...
- 1.0, // Air in central detectors region
- 1.0 // Material in non-centeral region
- };
- return t[istd];
+ // none.
+ // Return
+ // none.
+
+ if(&source == this) return *this;
+ Error("= operator","Not allowed to copy AliITSv11");
+ return *this;
}
//______________________________________________________________________
-Float_t AliITSv11::GetStandardThetaMax(Int_t istd){
- // Returns one of a set of standard Theata Max values.
+void AliITSv11::BuildGeometry(){
+ // This routine defines and Creates the geometry for version 11 of
+ // the ITS for use in the simulation display routines. This is a
+ // very simplified geometry for speed of viewing.
// Inputs:
- // Int_t istd Index to indecate which standard.
+ // none.
// Outputs:
- // none.
- // Return:
- // The appropreate standard Theta max value [degrees].
- Float_t t[]={0.1, // default
- 0.1, // Silicon detectors...
- 0.1, // Air in central detectors region
- 1.0 // Material in non-centeral region
- };
- return t[istd];
+ // none.
+ // Return
+ // none.
+ //TVector3 t(0.0,0.0,0.0);
+
+ //if(fITSV==0) fITSV = new AliITSGeometryITSV(this,"ALIC");
+ //if(fcS==0) fcS = new AliITSGeometrySSDCone(this,t,"TSV",1);
+
+ //fcS->BuildDisplayGeometry();
}
//______________________________________________________________________
-Float_t AliITSv11::GetStandardEfraction(Int_t istd){
- // Returns one of a set of standard E fraction values.
+void AliITSv11::CreateGeometry(){
+ // This routine defines and Creates the geometry for version 11 of
+ // the ITS. The geometry is used by the particle trasport routines,
+ // and therefore, is very detailed.
// Inputs:
- // Int_t istd Index to indecate which standard.
+ // none.
// Outputs:
- // none.
- // Return:
- // The appropreate standard E fraction value [#].
- Float_t t[]={0.1, // default
- 0.1, // Silicon detectors...
- 0.1, // Air in central detectors region
- 1.0 // Material in non-centeral region
- };
- return t[istd];
+ // none.
+ // Return
+ // none.
+ TVector3 t(0.0,0.0,0.0);
+ const Double_t kcm = 1.0;
+
+ TGeoManager *mgr = gGeoManager;
+ TGeoVolume *vALIC = mgr->GetTopVolume();
+
+ TGeoPcon *sITS = new TGeoPcon("ITS Top Volume, Daughter of ALIC",
+ 0.0,360.0,2);
+ // DefineSection(section number, Z, Rmin, Rmax).
+ sITS->DefineSection(0,-300.0*kcm,0.01*kcm,50.0*kcm);
+ sITS->DefineSection(1,+300.0*kcm,0.01*kcm,50.0*kcm);
+ TGeoVolume *vITS = new TGeoVolume("ITSV",sITS,0);
+ mgr->AddVolume(vITS);
+ vITS->SetVisibility(kFALSE);
+ vALIC->AddNode(vITS,1,0);
+ //
+ fSPDgeom->CarbonFiberSector(vITS);
+ fSDDgeom->SetGeomParameters(); // needed
+ fSDDgeom->Layer3(vITS);
+ fSDDgeom->Layer4(vITS);
+ fSupgeom->SPDCone(vITS);
+ fSupgeom->SPDThermalSheald(vITS);
+ fSupgeom->SDDCone(vITS);
+ fSupgeom->SSDCone(vITS);
+ fSupgeom->ServicesCableSupport(vITS);
}
//______________________________________________________________________
-void AliITSv11::Element(Int_t imat,const char* name,Int_t z,Double_t dens,
- Int_t istd){
- // Defines a Geant single element material and sets its Geant medium
- // proporties. The average atomic A is assumed to be given by their
- // natural abundances. Things like the radiation length are calculated
- // for you.
+void AliITSv11::CreateMaterials(){
+ // Create ITS materials
+ // This function defines the default materials used in the Geant
+ // Monte Carlo simulations for the geometries AliITSv11.
+ // In general it is automatically replaced by
// Inputs:
- // Int_t imat Material number.
- // const char* name Material name. No need to add a $ at the end.
- // Int_t z The elemental number.
- // Double_t dens The density of the material [g/cm^3].
- // Int_t istd Defines which standard set of transport parameters
- // which should be used.
- // Output:
- // none.
- // Return:
- // none.
- Float_t rad,Z,A=GetA(z),tmax,stemax,deemax,epsilon;
- char *name2;
- Int_t len;
-
- len = strlng(name)+1;
- name2 = new char[len];
- strncpy(name2,name,len-1);
- name2[len-1] = '\0';
- name2[len-2] = '$';
- Z = (Float_t)z;
- rad = GetRadLength(z)/dens;
- AliMaterial(imat,name2,A,Z,dens,rad,0.0,0,0);
- tmax = GetStandardTheataMax(istd); // degree
- stemax = GetStandardMaxStepSize(istd); // cm
- deemax = GetStandardEfraction(istd); // #
- epsilon = GetStandardEpsilon(istd);
- AliMedium(imat,name2,imat,0,gAlice->Field()->Integ(),
- gAlice->Field()->Max(),tmax,stemax,deemax,epsilon,0.0);
- delete[] name2;
-}
-//______________________________________________________________________
-void AliITSv11::SSDCone(Double_t zShift){
- // Defines the volumes and materials for the ITS SSD Support cone.
- // Based on drawings ALR-0767 and ALR-0767/3. Units are in mm.
- // Inputs:
- // Double_t zShift The z shift to be applied to the final volume.
+ // none.
// Outputs:
// none.
- // Return:
+ // Return
// none.
- Double_t *za,*rmina,*rmaxa,phi0=0.0,dphi=360.0;
- Int_t i,n,nz,nrad=0;
- Double_t Cthick=1.5; //mm, Carbon finber thickness
- Double_t r=15.0; // mm, Radius of curvature.
- Double_t tc=51.0; // angle of SSD cone [degrees].
- Double_t t; // some general angle [degrees].
- Int_t SSDcf=; // SSD support cone Carbon Fiber materal number.
-
- SetScalemm();
- // Lets start with the upper left outer carbon fiber surface.
- nz = 6;
- za = new Double_t[nz];
- rmina = new Double_t[nz];
- rmaxa = new Double_t[nz];
- za[0] = 0.0;
- rmaxa[0] = 985./2.;
- rmina[0] = rmaxa[0] - Cthick;
- za[1] = 13.5 - 5.0; // The original size of 13.5 (ALR-0767) is milled down
- rmaxa[1] = rmaxa[0]; // by 5mm to give a well defined reference surface
- rmina[1] = rmina[0]; // (ALR-0767/3).
- // The curved section is given by the following fomula
- // rmax = r*Sind(90.-t)+rmaxa[0]-r for 0<=t<=tc.
- // rmin = (r-Cthick)*Sind(90.-t)+rmina[0]-(r-Cthick) for 0<=t<=tc.
- // z = r*Cosd(90.-t)+za[1] for 0<=t<=tc.
- za[2] = (r-Cthick)*Cosd(90.-tc)+za[1];
- rmina[2] = (r-Cthick)*Sind(90.0-tc)+rmaxa[0]-(r-Cthick);
- t = 90.0 - ACosd((za[2]-za[1])/r); // angle for rmax
- rmaxa[2] = r*Sind(90.-t)+rmaxa[0]-r;
- rmaxa[3] = r*Sind(90.0-tc)+rmaxa[0]-r;
- za[3] =r*Cosd(90.-tc)+za[1];
- // angled section. surface is given by the following equations
- // R = -Tand(tc)*Z + rmaxa[3] or rmina[2]
- rmina[3] = -Tand(tc)*za[3] + rmina[2];
- // Point of whole. Whole surface has fixed radius = 890.0/2 mm
- rmina[4] = 890.0/2.+Cthick ; // Inner whole surface radius (ALR-0767)
- za[4] = (rmina[4] - rmina[2])/(-Tand(tc));
- rmaxa[4] = -Tand(tc)*za[4]+rmaxa[3];
+ //TGeoMaterial *C = new TGeoMaterial("ITSCarbon",12.0,6.0,2.265);
+ TGeoMaterial *matAl = new TGeoMaterial("ITSAluminum",26.981539,13.0,2.07);
+ TGeoMixture *matCfiber = new TGeoMixture("ITSCarbonFiber",6,1.930);
+ TGeoMixture *matRohacell = new TGeoMixture("ITSRohacell",6,1.930);
+ TGeoMixture *matStaselite = new TGeoMixture("ITSStaselite4411w",6,1.930);
+ TGeoMixture *matAir = new TGeoMixture("ITSAir",6,1.205*1.E-3);
+ TGeoMixture *matStainless = new TGeoMixture("ITSStainless",6,1.930);
//
- rmaxa[5] = rmina[4];
- rmina[5] = rmina[4];
- za[5] = (rmaxa[5] - rmaxa[3])/(-Tand(tc));
- PolyCone("SCAA","SSD Suport cone Carbon Fiber Surface outer left",
- phi0,dphi,nz,*z,*rmin,*rmax,SSDcf);
- Za[0] = 1.; Wa[0] = ; // Hydrogen Content
- Za[1] = 6.; Wa[0] = ; // Carbon Content
- MixtureByWeight(SSDcf,"Carbon Fiber for SSD support cone",Z,W,dens,3);
- // Now for the Filler in the mounting regions Upper left first
- zb[0] = za[0];
- rmaxb[0] = rmina[0];
- rminb[0] = 945./2.-Cthick;
+ Double_t medSPDcone[20];
+ medSPDcone[0] = 1.0; // imat
+ medSPDcone[1] = 0.0; // isvol
+ medSPDcone[2] = gAlice->Field()->Integ(); // ifield
+ medSPDcone[3] = gAlice->Field()->Max(); // fieldm
+ medSPDcone[4] = 1.0; // tmaxfd [degrees]
+ medSPDcone[5] = 1.0; // stemax [cm]
+ medSPDcone[6] = 0.5; // deemax [fraction]
+ medSPDcone[7] = 1.0E-3; // epsil [cm]
+ medSPDcone[8] = 0.0; // stmin [cm]
+ new TGeoMedium("ITSspdCarbonFiber",1,matCfiber,medSPDcone);
+ medSPDcone[0] += 1.0;
+ new TGeoMedium("ITSspdStaselite4411w",2,matStaselite,medSPDcone);
+ medSPDcone[0] += 1.0;
+ new TGeoMedium("ITSspdRohacell50A",3,matRohacell,medSPDcone);
+ medSPDcone[0] += 1.0;
+ new TGeoMedium("ITSspdStainlesSteal",4,matStainless,medSPDcone);
+ medSPDcone[0] += 1.0;
+ new TGeoMedium("ITSspdAir",5,matAir,medSPDcone);
+ medSPDcone[0] += 1.0;
+ new TGeoMedium("ITSspdAl",6,matAl,medSPDcone);
//
- rmaxb[1] = rmina[1];
-
- delete[] za;delete[] rmina;delete[] rmaxa;
- // Set back to cm default scale before exiting.
- SetScalecm();
- return;
-}
-//______________________________________________________________________
-void AliITSv11::CreateGeometry(){
- ////////////////////////////////////////////////////////////////////////
- // This routine defines and Creates the geometry for version 11 of the ITS.
- ////////////////////////////////////////////////////////////////////////
-}
-//______________________________________________________________________
-void AliITSv11::CreateMaterials(){
-////////////////////////////////////////////////////////////////////////
- //
- // Create ITS materials
- // This function defines the default materials used in the Geant
- // Monte Carlo simulations for the geometries AliITSv1, AliITSv3,
- // AliITSv11.
- // In general it is automatically replaced by
- // the CreatMaterials routine defined in AliITSv?. Should the function
- // CreateMaterials not exist for the geometry version you are using this
- // one is used. See the definition found in AliITSv5 or the other routine
- // for a complete definition.
- //
+ Double_t medSSDcone[20];
+ medSSDcone[0] = 1.0; // imat
+ medSSDcone[1] = 0.0; // isvol
+ medSSDcone[2] = gAlice->Field()->Integ(); // ifield
+ medSSDcone[3] = gAlice->Field()->Max(); // fieldm
+ medSSDcone[4] = 1.0; // tmaxfd [degrees]
+ medSSDcone[5] = 1.0; // stemax [cm]
+ medSSDcone[6] = 0.5; // deemax [fraction]
+ medSSDcone[7] = 1.0E-3; // epsil [cm]
+ medSSDcone[8] = 0.0; // stmin [cm]
+ new TGeoMedium("ITSssdCarbonFiber",1,matCfiber,medSSDcone);
+ medSSDcone[0] += 1.0;
+ new TGeoMedium("ITSssdStaselite4411w",2,matStaselite,medSSDcone);
+ medSSDcone[0] += 1.0;
+ new TGeoMedium("ITSssdRohacell50A",3,matRohacell,medSSDcone);
+ medSSDcone[0] += 1.0;
+ new TGeoMedium("ITSssdStainlesSteal",4,matStainless,medSSDcone);
+ medSSDcone[0] += 1.0;
+ new TGeoMedium("ITSssdAir",5,matAir,medSSDcone);
+ medSSDcone[0] += 1.0;
+ new TGeoMedium("ITSssdAl",6,matAl,medSSDcone);
}
//______________________________________________________________________
void AliITSv11::InitAliITSgeom(){
- // Based on the geometry tree defined in Geant 3.21, this
- // routine initilizes the Class AliITSgeom from the Geant 3.21 ITS geometry
- // sturture.
+ // Based on the geometry tree defined in Geant 3.21, this
+ // routine initilizes the Class AliITSgeom from the Geant 3.21 ITS
+ // geometry sturture.
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return
+ // none.
}
-
//______________________________________________________________________
void AliITSv11::Init(){
- ////////////////////////////////////////////////////////////////////////
- // Initialise the ITS after it has been created.
- ////////////////////////////////////////////////////////////////////////
+ // Initialise the ITS after it has been created.
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return
+ // none.
}
//______________________________________________________________________
void AliITSv11::SetDefaults(){
- // sets the default segmentation, response, digit and raw cluster classes
+ // Sets the default segmentation, response, digit and raw cluster
+ // classes to be used. These defaults can be overwritten in the
+ // macros that do these later steps. Defaults are give hear for the
+ // general user.
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return
+ // none.
}
//______________________________________________________________________
void AliITSv11::DrawModule(){
- ////////////////////////////////////////////////////////////////////////
- // Draw a shaded view of the FMD version 11.
- ////////////////////////////////////////////////////////////////////////
+ // Draw a standard set of shaded view of the ITS version 11.
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return
+ // none.
}
//______________________________________________________________________
void AliITSv11::StepManager(){
- ////////////////////////////////////////////////////////////////////////
- // Called for every step in the ITS, then calles the AliITShit class
+ // Called for every step in the ITS, then calles the AliITShit class
// creator with the information to be recoreded about that hit.
- // The value of the macro ALIITSPRINTGEOM if set to 1 will allow the
+ // The value of the macro ALIITSPRINTGEOM if set to 1 will allow the
// printing of information to a file which can be used to create a .det
// file read in by the routine CreateGeometry(). If set to 0 or any other
// value except 1, the default behavior, then no such file is created nor
- // it the extra variables and the like used in the printing allocated.
- ////////////////////////////////////////////////////////////////////////
+ // is the extra variables and the like used in the printing allocated.
}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff