/**************************************************************************
- * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
+ * Copyright(c) 2007-2009, ALICE Experiment at CERN, All rights reserved. *
* *
* Author: The ALICE Off-line Project. *
* Contributors are mentioned in the code where appropriate. *
* provided "as is" without express or implied warranty. *
**************************************************************************/
-//************************************************************************
-// Inner Traking System geometry v11
+
+/* $Id: */
+
+
+//========================================================================
//
-// Based on ROOT geometrical modeler
-// Set #define WITHROOT in TGeant3.h
+// Geometry of the Inner Tracking System
+// ---------------------------------------
+// This geometry is fully described in TGeo geometry (v11)
+//
+// Ludovic Gaudichet (gaudichet@to.infn.it)
+// Mario Sitta (sitta@to.infn.it)
+//
+//========================================================================
+
+
+// $Log$
+// Revision 1.1 2011/06/10 14:48:24 masera
+// First version from v11Hybrid to v11 (M. Sitta)
//
-// B. Nilsen, L. Gaudichet
-//************************************************************************
-//#include <Riostream.h>
#include <TClonesArray.h>
+#include <TGeoGlobalMagField.h>
+#include <TGeoManager.h>
+#include <TGeoMatrix.h>
+#include <TGeoPhysicalNode.h>
+#include <TGeoVolume.h>
+#include <TGeoXtru.h>
#include <TLorentzVector.h>
+#include <TString.h>
+#include <TVirtualMC.h>
#include "AliITS.h"
-#include "AliITSDetType.h"
-#include "AliITSGeant3Geometry.h"
-#include "AliITSgeom.h"
-#include "AliITSgeomSDD.h"
-#include "AliITSgeomSPD.h"
-#include "AliITSgeomSSD.h"
+#include "AliITSDetTypeSim.h"
#include "AliITShit.h"
-#include "AliITSresponseSDD.h"
-#include "AliITSresponseSPD.h"
-#include "AliITSresponseSSD.h"
+#include "AliITSCalibrationSDD.h"
#include "AliITSsegmentationSDD.h"
#include "AliITSsegmentationSPD.h"
#include "AliITSsegmentationSSD.h"
#include "AliITSv11.h"
+#include "AliLog.h"
+#include "AliMC.h"
#include "AliMagF.h"
#include "AliRun.h"
#include "AliTrackReference.h"
-#include "AliMC.h"
-
-#include <TGeoManager.h>
-#include <TGeoVolume.h>
-#include <TGeoPcon.h>
-//#include "AliITSv11GeometrySPD.h"
+#include "AliITSv11GeometrySPD.h"
#include "AliITSv11GeometrySDD.h"
-//#include "AliITSv11GeometrySupport.h"
-
+#include "AliITSv11GeometrySSD.h"
+#include "AliITSv11GeometrySupport.h"
+#include "AliGeomManager.h"
ClassImp(AliITSv11)
-
+
//______________________________________________________________________
- AliITSv11::AliITSv11() :
- AliITS("ITS","ITS geometry v11"),
- fGeomDetOut(kFALSE),
- fGeomDetIn(kFALSE),
- fMajorVersion(11),
- fMinorVersion(0) {
- // Standard default constructor for the ITS version 11.
- // Inputs:
- // none.
- // Outputs:
- // none.
- // Return:
- // none.
-
- Int_t i;
- for(i=0;i<60;i++) fRead[i] = '\0';
- for(i=0;i<60;i++) fWrite[i] = '\0';
- for(i=0;i<60;i++) fEuclidGeomDet[i] = '\0';
- strncpy(fRead,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymmFMD.det",60);
- SetEUCLID(kFALSE);
-
-// fSPDgeom = new AliITSv11GeometrySPD();
- fSDDgeom = new AliITSv11GeometrySDD();
-// fSupgeom = new AliITSv11GeometrySupport();
-
- fIdN = 1;
- fIdName = new TString[fIdN];
- fIdName[0] = fSDDgeom->GetSenstiveVolumeMame();
- fIdSens = new Int_t[fIdN];
- for(Int_t i=0; i<fIdN; i++) fIdSens[i] = 0;
+AliITSv11::AliITSv11():
+ fByThick(kTRUE),
+ fMajorVersion(IsVersion()),
+ fMinorVersion(-1),
+ fIDMother(0),
+ fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion),
+ fSPDgeom(0),
+ fSDDgeom(0),
+ fSSDgeom(0),
+ fSupgeom(0)
+ {
+ // Standard default constructor
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return:
+ // none.
}
//______________________________________________________________________
-AliITSv11::AliITSv11(Int_t debugITS,Int_t debugSPD,Int_t debugSDD,
- Int_t debugSSD,Int_t debugSUP) :
- AliITS("ITS","ITS geometry v11"),
- fGeomDetOut(kFALSE),
- fGeomDetIn(kFALSE),
- fMajorVersion(11),
- fMinorVersion(0) {
- // Standard default constructor for the ITS version 11.
- // Inputs:
- // Int_t debugITS Debug flag for ITS code (required).
- // Int_t debugSPD Debug flag for SPD geometry (default = 0).
- // Int_t debugSDD Debug flag for SDD geometry (default = 0).
- // Int_t debugSSD Debug flag for SSD geometry (default = 0).
- // Int_t debugSUP Debug flag for SUPort geometry (default = 0).
- // Outputs:
- // none.
- // Return
+AliITSv11::AliITSv11(const char *title)
+ : AliITS("ITS", title),
+ fByThick(kTRUE),
+ fMajorVersion(IsVersion()),
+ fMinorVersion(1),
+ fIDMother(0),
+ fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion),
+ fSPDgeom(0),
+ fSDDgeom(0),
+ fSSDgeom(0),
+ fSupgeom(0)
+{
+ // Standard constructor for the v11 geometry.
+ // Inputs:
+ // const char * title Arbitrary title
+ // Outputs:
+ // none.
+ // Return:
+ // none.
+ Int_t i;
+
+ fSPDgeom = new AliITSv11GeometrySPD();
+ fSDDgeom = new AliITSv11GeometrySDD(0);
+ fSSDgeom = new AliITSv11GeometrySSD();
+ fSupgeom = new AliITSv11GeometrySupport();
- SetDensityServicesByThickness();
+ fIdN = 6;
+ fIdName = new TString[fIdN];
- SetEUCLID(kFALSE);
- fEuclidGeometry="$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.euc";
- strncpy(fEuclidGeomDet,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det",60);
- strncpy(fRead,fEuclidGeomDet,60);
- strncpy(fWrite,fEuclidGeomDet,60);
- strncpy(fRead,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymmFMD.det",60);
+ fIdName[0] = fSPDgeom->GetSenstiveVolumeName1();
+ fIdName[1] = fSPDgeom->GetSenstiveVolumeName2();
-// fSPDgeom = new AliITSv11GeometrySPD(debugSPD);
- fSDDgeom = new AliITSv11GeometrySDD(debugSDD);
-// fSupgeom = new AliITSv11GeometrySupport(debugSUP);
+ fIdName[2] = fSDDgeom->GetSenstiveVolumeName3();
+ fIdName[3] = fSDDgeom->GetSenstiveVolumeName4();
+
+ fIdName[4] = fSSDgeom->GetSenstiveVolumeName5();
+ fIdName[5] = fSSDgeom->GetSenstiveVolumeName6();
- fIdN = 1;
- fIdName = new TString[fIdN];
- fIdName[0] = fSDDgeom->GetSenstiveVolumeMame();
fIdSens = new Int_t[fIdN];
- for(Int_t i=0; i<fIdN; i++) fIdSens[i] = 0;
+ for(i=0;i<fIdN;i++) fIdSens[i] = 0;
- debugITS = (debugSPD && debugSSD && debugSUP); //remove temp. warnings
+ SetDensityServicesByThickness();
+
}
-
//______________________________________________________________________
-AliITSv11::AliITSv11(const AliITSv11 &source) :
- AliITS(source){
- // Copy Constructor for ITS version 11. This function is not to be
- // used. If any other instance of this function, other than "this" is
- // passed, an error message is returned.
+AliITSv11::AliITSv11(const char *name, const char *title)
+ : AliITS("ITS", title),
+ fByThick(kTRUE),
+ fMajorVersion(IsVersion()),
+ fMinorVersion(1),
+ fIDMother(0),
+ fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion),
+ fSPDgeom(0),
+ fSDDgeom(0),
+ fSSDgeom(0),
+ fSupgeom(0)
+{
+ // Standard constructor for the v11 geometry.
// Inputs:
- // const AliITSv11 &source This class
+ // const char * name Ignored, set to "ITS"
+ // const char * title Arbitrary title
+ // Outputs:
+ // none.
+ // Return:
+ // none.
+ Int_t i;
+
+ fSPDgeom = new AliITSv11GeometrySPD();
+ fSDDgeom = new AliITSv11GeometrySDD(0);
+ fSSDgeom = new AliITSv11GeometrySSD();
+ fSupgeom = new AliITSv11GeometrySupport();
- if(&source == this) return;
- Warning("Copy Constructor","Not allowed to copy AliITSv11");
- return;
-}
+ fIdN = 6;
+ fIdName = new TString[fIdN];
+ (void) name; // removes warning message
-//______________________________________________________________________
-AliITSv11& AliITSv11::operator=(const AliITSv11
- &source){
- // Assignment operator for the ITS version 11. This function is not
- // to be used. If any other instance of this function, other than "this"
- // is passed, an error message is returned.
- // Inputs:
- // const AliITSv11 &source This class
+ fIdName[0] = fSPDgeom->GetSenstiveVolumeName1();
+ fIdName[1] = fSPDgeom->GetSenstiveVolumeName2();
- if(&source == this) return *this;
- Warning("= operator","Not allowed to copy AliITSv11");
- return *this;
-}
+ fIdName[2] = fSDDgeom->GetSenstiveVolumeName3();
+ fIdName[3] = fSDDgeom->GetSenstiveVolumeName4();
+
+ fIdName[4] = fSSDgeom->GetSenstiveVolumeName5();
+ fIdName[5] = fSSDgeom->GetSenstiveVolumeName6();
+
+ fIdSens = new Int_t[fIdN];
+ for(i=0;i<fIdN;i++) fIdSens[i] = 0;
+ SetDensityServicesByThickness();
+
+}
//______________________________________________________________________
AliITSv11::~AliITSv11() {
+ // Standard destructor
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return:
+ // none.
+ delete fSPDgeom;
delete fSDDgeom;
+ delete fSSDgeom;
+ delete fSupgeom;
}
-
//______________________________________________________________________
-void AliITSv11::BuildGeometry(){
+void AliITSv11::SetT2Lmatrix(Int_t uid, Double_t yShift,
+ Bool_t yFlip, Bool_t yRot180) const
+{
+ //
+ // Creates the TGeo Local to Tracking transformation matrix
+ // and sends it to the corresponding TGeoPNEntry
+ //
+ // This function is used in AddAlignableVolumes()
+
+ TGeoPNEntry *alignableEntry = gGeoManager->GetAlignableEntryByUID(uid);
+ TGeoHMatrix* globMatrix = alignableEntry->GetGlobalOrig();
+
+ Double_t *gtrans = globMatrix->GetTranslation(), rotMatrix[9];
+ memcpy(&rotMatrix[0], globMatrix->GetRotationMatrix(), 9*sizeof(Double_t));
+ Double_t al = TMath::ATan2(rotMatrix[1],rotMatrix[0]);
+ if (yRot180) {
+ al = TMath::ATan2(rotMatrix[1],-rotMatrix[0]);
+ }
+ Double_t xShift = gtrans[0]*TMath::Cos(al)+gtrans[1]*TMath::Sin(al);
+ Double_t zShift = -gtrans[2];
+
+ TGeoHMatrix *matLtoT = new TGeoHMatrix;
+ matLtoT->SetDx( xShift ); // translation
+ matLtoT->SetDy( yShift );
+ matLtoT->SetDz( zShift );
+ rotMatrix[0]= 0; rotMatrix[1]= 1; rotMatrix[2]= 0; // + rotation
+ rotMatrix[3]= 1; rotMatrix[4]= 0; rotMatrix[5]= 0;
+ rotMatrix[6]= 0; rotMatrix[7]= 0; rotMatrix[8]=-1;
+ if (yFlip) rotMatrix[3] = -1; // flipping in y (for SPD1)
+ if (yFlip) rotMatrix[1] = -1; // flipping in y (for SPD1)
+
+ if (yRot180) { // rotation of pi around the axis perpendicular to the wafer
+ if (yFlip) matLtoT->SetDx( -xShift ); // flipping in y (for SPD1)
+ matLtoT->SetDy( -yShift );
+ matLtoT->SetDz( -zShift );
+ rotMatrix[8]=1;
+ rotMatrix[3] = -1;
+ if (yFlip) rotMatrix[3] = 1; // flipping in y (for SPD1)
+ }
+
+ TGeoRotation rot;
+ rot.SetMatrix(rotMatrix);
+ matLtoT->MultiplyLeft(&rot);
+ TGeoHMatrix *matTtoL = new TGeoHMatrix(matLtoT->Inverse());
+ delete matLtoT;
+ alignableEntry->SetMatrix(matTtoL);
}
+//______________________________________________________________________
+void AliITSv11::AddAlignableVolumes() const
+{
+ // Creates entries for alignable volumes associating the symbolic volume
+ // name with the corresponding volume path.
+ //
+ // Records in the alignable entries the transformation matrices converting
+ // TGeo local coordinates (in the RS of alignable volumes) to the tracking
+ // system
+ // For this, this function has to run before the misalignment because we
+ // are using the ideal positions in the AliITSgeom object.
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return:
+ // none.
+
+ AliInfo("Add ITS alignable volumes");
+
+ if (!gGeoManager) {
+ AliFatal("TGeoManager doesn't exist !");
+ return;
+ }
+
+ AliGeomManager::ELayerID layerId;
+ Int_t modUID, modnum;
+
+ if( !gGeoManager->SetAlignableEntry("ITS","ALIC_1/ITSV_1") )
+ AliFatal(Form("Unable to set alignable entry ! %s :: %s",
+ "ITS","ALIC_1/ITSV_1"));
+
+ TString strSPD = "ITS/SPD";
+ TString strSDD = "ITS/SDD";
+ TString strSSD = "ITS/SSD";
+ TString strStave = "/Stave";
+ TString strHalfStave = "/HalfStave";
+ TString strLadder = "/Ladder";
+ TString strSector = "/Sector";
+ TString strSensor = "/Sensor";
+ TString strEntryName1;
+ TString strEntryName2;
+ TString strEntryName3;
+ TString strEntryName4;
+
+ TString str0;
+ TString str1;
+ TString str2;
+
+ TString ladder;
+
+ //===== SPD layers =====
+
+ str0 = "ALIC_1/ITSV_1/ITSSPD_1/ITSSPDCarbonFiberSectorV_";
+ str1 = "/ITSSPDSensitiveVirtualvolumeM0_1/ITSSPDlay1-Stave_";
+
+ TString str1Bis = "/ITSSPDhalf-Stave";
+ TString str1Tierce = "_1";
+
+ str2 = "/ITSSPDlay1-Ladder_";
+
+ TString sector;
+ TString stave;
+ TString halfStave;
+ TString module;
+
+ layerId = AliGeomManager::kSPD1;
+ modnum = 0;
+
+ for(Int_t cSect = 0; cSect<10; cSect++) {
+
+ sector = str0;
+ sector += cSect+1; // this is one full sector
+ strEntryName1 = strSPD;
+ strEntryName1 += 0;
+ strEntryName1 += strSector;
+ strEntryName1 += cSect;
+ if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data()))
+ AliFatal(Form("New lay 1: Unable to set alignable entry 1! %s::%s",
+ strEntryName1.Data(),sector.Data()));
+
+ for(Int_t cStave=0; cStave<2; cStave++) {
+
+ stave = sector;
+ stave += str1;
+ stave += cStave+1;
+ strEntryName2 = strEntryName1;
+ strEntryName2 += strStave;
+ strEntryName2 += cStave;
+
+ for(Int_t cHS=0; cHS<2; cHS++) {
+
+ halfStave = stave;
+ halfStave += str1Bis;
+ halfStave += cHS;
+ halfStave += str1Tierce;
+ strEntryName3 = strEntryName2;
+ strEntryName3 += strHalfStave;
+ strEntryName3 += cHS;
+
+ if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),
+ halfStave.Data()))
+ AliFatal(Form("New lay 1: Unable to set alignable entry 3! %s::%s",
+ strEntryName3.Data(),halfStave.Data()));
+
+ for(Int_t cLad=0; cLad<2; cLad++) {
+
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
+ module = halfStave;
+ module += str2;
+ module += cLad+cHS*2+1;
+ strEntryName4 = strEntryName3;
+ strEntryName4 += strLadder;
+ strEntryName4 += cLad+cHS*2;
+ if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID))
+ AliFatal(Form("New lay 1: Unable to set alignable entry 4! %s::%s",
+ strEntryName4.Data(),module.Data()));
+
+ SetT2Lmatrix(modUID, 0.0081, kTRUE, kTRUE);
+ // 0.0081 is the shift between the centers of alignable
+ // and sensitive volumes. It is directly extracted from
+ // the new SPD geometry
+ } // end for cLad
+ } // end for cHS
+ } // end for cStave
+ } // end for cSect
+
+ layerId = AliGeomManager::kSPD2;
+ modnum = 0;
+ str1 = "/ITSSPDSensitiveVirtualvolumeM0_1/ITSSPDlay2-Stave_";
+ str2 = "/ITSSPDlay2-Ladder_";
+
+ for(Int_t cSect = 0; cSect<10; cSect++) {
+
+ sector = str0;
+ sector += cSect+1; // this is one full sector
+ strEntryName1 = strSPD;
+ strEntryName1 += 1;
+ strEntryName1 += strSector;
+ strEntryName1 += cSect;
+
+ for(Int_t cStave=0; cStave<4; cStave++) {
+
+ stave = sector;
+ stave += str1;
+ stave += cStave+1;
+ strEntryName2 = strEntryName1;
+ strEntryName2 += strStave;
+ strEntryName2 += cStave;
+
+ for(Int_t cHS=0; cHS<2; cHS++) {
+
+ halfStave = stave;
+ halfStave += str1Bis;
+ halfStave += cHS;
+ halfStave += str1Tierce;
+ strEntryName3 = strEntryName2;
+ strEntryName3 += strHalfStave;
+ strEntryName3 += cHS;
+
+ if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),
+ halfStave.Data()))
+ AliFatal(Form("New lay 2: Unable to set alignable entry 3! %s::%s",
+ strEntryName3.Data(),halfStave.Data()));
+
+ for(Int_t cLad=0; cLad<2; cLad++) {
+
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
+ module = halfStave;
+ module += str2;
+ module += cLad+cHS*2 +1;
+ strEntryName4 = strEntryName3;
+ strEntryName4 += strLadder;
+ strEntryName4 += cLad+cHS*2;
+ if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID))
+ AliFatal(Form("New lay 2: Unable to set alignable entry 4! %s::%s",
+ strEntryName4.Data(),module.Data()));
+
+ SetT2Lmatrix(modUID, -0.0081, kFALSE);
+ } // end for cLad
+ } // end for cHS
+ } // end for cStave
+ } // cSect
+
+ //===== SDD layers =====
+
+ layerId = AliGeomManager::kSDD1;
+ modnum = 0;
+
+ str0 = "/ALIC_1/ITSV_1/ITSsddLayer3_1/ITSsddLadd_"; // SDD layer1
+ str1 = "/ITSsddSensor3_";
+
+ TString sensor;
+
+ for(Int_t c1 = 0; c1<14; c1++) {
+
+ ladder = str0;
+ ladder += c1; // the set of wafers from one ladder
+ strEntryName1 = strSDD;
+ strEntryName1 += 2;
+ strEntryName1 +=strLadder;
+ strEntryName1 += c1;
+ //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
+
+ for(Int_t c2 =0; c2<6; c2++) {
+
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
+ sensor = ladder;
+ sensor += str1;
+ sensor += c2;
+ strEntryName2 = strEntryName1;
+ strEntryName2 += strSensor;
+ strEntryName2 += c2;
+ //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),sensor.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),sensor.Data()));
+
+ SetT2Lmatrix(modUID, 0, kFALSE, c2>=3);
+ }
+ }
+
+ layerId = AliGeomManager::kSDD2;
+ modnum = 0;
+ str0 = "/ALIC_1/ITSV_1/ITSsddLayer4_1/ITSsddLadd_"; // SDD layer2
+ str1 = "/ITSsddSensor4_";
+
+ for(Int_t c1 = 0; c1<22; c1++) {
+
+ ladder = str0;
+ ladder += c1; // the set of wafers from one ladder
+ strEntryName1 = strSDD;
+ strEntryName1 += 3;
+ strEntryName1 += strLadder;
+ strEntryName1 += c1;
+ //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
+
+ for(Int_t c2 =0; c2<8; c2++) {
+
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
+ sensor = ladder;
+ sensor += str1;
+ sensor += c2;
+ strEntryName2 = strEntryName1;
+ strEntryName2 += strSensor;
+ strEntryName2 += c2;
+ //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),sensor.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),sensor.Data()));
+
+ SetT2Lmatrix(modUID, 0, kFALSE, c2>=4);
+ }
+ }
+
+ //===== SSD layers =====
+
+ layerId = AliGeomManager::kSSD1;
+ modnum = 0;
+
+ str0 = "/ALIC_1/ITSV_1/ITSssdLayer5_1/ITSssdLay5Ladd_";//SSD layer1
+ str1 = "/ITSssdSensor5_";
+ str2 = "";
+
+ TString wafer;
+
+ for(Int_t c1 = 0; c1<34; c1++) {
+
+ ladder = str0;
+ ladder += c1; // the set of wafers from one ladder
+ strEntryName1 = strSSD;
+ strEntryName1 += 4;
+ strEntryName1 += strLadder;
+ strEntryName1 += c1;
+ //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
+
+ for(Int_t c2 =0; c2<22; c2++) {
+
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
+ wafer = ladder;
+ wafer += str1;
+ wafer += c2;
+ //wafer += str2; // one wafer
+ strEntryName2 = strEntryName1;
+ strEntryName2 += strSensor;
+ strEntryName2 += c2;
+ //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),wafer.Data()));
+
+ SetT2Lmatrix(modUID, 0, kFALSE, kFALSE);
+ }
+ }
+
+ layerId = AliGeomManager::kSSD2;
+ modnum = 0;
+ str0 = "/ALIC_1/ITSV_1/ITSssdLayer6_1/ITSssdLay6Ladd_"; // SSD layer2
+ str1 = "/ITSssdSensor6_";
+ str2 = "";
+
+ for(Int_t c1 = 0; c1<38; c1++) {
+
+ ladder = str0;
+ ladder += c1; // the set of wafers from one ladder
+ strEntryName1 = strSSD;
+ strEntryName1 += 5;
+ strEntryName1 += strLadder;
+ strEntryName1 += c1;
+ //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
+
+ for(Int_t c2 =0; c2<25; c2++) {
+
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
+ wafer = ladder;
+ wafer += str1;
+ wafer += c2;
+ //wafer += str2; // one wafer
+ strEntryName2 = strEntryName1;
+ strEntryName2 += strSensor;
+ strEntryName2 += c2;
+ //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),wafer.Data()));
+
+ SetT2Lmatrix(modUID, 0, kFALSE, kFALSE);
+ }
+ }
+
+}
//______________________________________________________________________
-void AliITSv11::CreateGeometry(){
- //
- // Create ROOT geometry
- //
+void AliITSv11::CreateGeometry()
+{
+ // Create the geometry and insert it in ALIC
TGeoManager *geoManager = gGeoManager;
- TGeoVolume *vALIC = geoManager->GetTopVolume();
- TGeoPcon *sITS = new TGeoPcon("ITS Top Volume",0.0,360.0,2);
+ TGeoVolume *vALIC = geoManager->GetVolume("ALIC");
- // DefineSection(section number, Z, Rmin, Rmax).
- const Double_t kcm = 1.0;
- sITS->DefineSection(0,-300.0*kcm,0.01*kcm,50.0*kcm);
- sITS->DefineSection(1,+300.0*kcm,0.01*kcm,50.0*kcm);
+ // This part is really ugly, needs to be redone
+ new TGeoVolumeAssembly("ITSV");
+ new TGeoVolumeAssembly("ITSS");
- TGeoMedium *air = gGeoManager->GetMedium("ITSair");
- TGeoVolume *vITS = new TGeoVolume("vITS",sITS,air);
- vITS->SetVisibility(kFALSE);
- vALIC->AddNode(vITS,1,0);
+ TGeoVolume *vITSV = geoManager->GetVolume("ITSV");
+ TGeoVolume *vITSS = geoManager->GetVolume("ITSS");
-// fSPDgeom->CenteralSPD(vITS);
- fSDDgeom->Layer3(vITS);
- fSDDgeom->Layer4(vITS);
-// fSupgeom->SPDCone(vITS);
-// fSupgeom->SPDThermalSheald(vITS);
-// fSupgeom->SDDCone(vITS);
-// fSupgeom->SSDCone(vITS);
-// fSupgeom->ServicesCableSupport(vITS);
+ vALIC->AddNode(vITSV, 1, 0);
+ vALIC->AddNode(vITSS, 1, 0);
-}
+ //
+ const Char_t *cvsDate="$Date$";
+ const Char_t *cvsRevision="$Revision$";
+ const Int_t kLength=100;
+ Char_t vstrng[kLength];
+ if(fInitGeom.WriteVersionString(vstrng,kLength,(AliITSVersion_t)IsVersion(),
+ fMinorVersion,cvsDate,cvsRevision)) {
+ vITSV->SetTitle(vstrng);
+ vITSS->SetTitle(vstrng);
+ }
+
+ fSPDgeom->SPDSector(vITSV);
+
+ fSDDgeom->Layer3(vITSV);
+ fSDDgeom->Layer4(vITSV);
+ fSDDgeom->ForwardLayer3(vITSV);
+ fSDDgeom->ForwardLayer4(vITSV);
+
+ fSSDgeom->Layer5(vITSV);
+ fSSDgeom->Layer6(vITSV);
+ fSSDgeom->LadderSupportLayer5(vITSV);
+ fSSDgeom->LadderSupportLayer6(vITSV);
+ fSSDgeom->EndCapSupportSystemLayer6(vITSV);
+ fSSDgeom->EndCapSupportSystemLayer5(vITSV);
+
+ fSupgeom->SPDCone(vITSV);
+ fSupgeom->SDDCone(vITSV);
+ fSupgeom->SSDCone(vITSV);
+
+ fSDDgeom->SDDCables(vITSV);
+ fSSDgeom->SSDCables(vITSV);
+ fSupgeom->ServicesCableSupport(vITSS);
+
+ fSupgeom->ITSTPCSupports(vITSS);
+}
//______________________________________________________________________
-void AliITSv11::CreateMaterials(){
- //
- // Create ITS materials
- // Defined media here should correspond to the one defined in galice.cuts
- // File which is red in (AliMC*) fMCApp::Init() { ReadTransPar(); }
- //
+void AliITSv11::CreateMaterials()
+{
+ // Create ITS materials
+ // This function defines the default materials used in the Geant
+ // Monte Carlo simulations for the geometries AliITSv1, AliITSv3,
+ // AliITSv11.
+ // In general it is automatically replaced by
+ // the CreateMaterials routine defined in AliITSv?. Should the function
+ // CreateMaterials not exist for the geometry version you are using this
+ // one is used. See the definition found in AliITSv5 or the other routine
+ // for a complete definition.
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return:
+ // none.
- Int_t ifield = gAlice->Field()->Integ();
- Float_t fieldm = gAlice->Field()->Max();
+ Int_t ifield = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Integ();
+ Float_t fieldm = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Max();
Float_t tmaxfd = 0.1; // 1.0; // Degree
Float_t stemax = 1.0; // cm
//CM55J
+
Float_t aCM55J[4]={12.0107,14.0067,15.9994,1.00794};
Float_t zCM55J[4]={6.,7.,8.,1.};
Float_t wCM55J[4]={0.908508078,0.010387573,0.055957585,0.025146765};
- Float_t dCM55J = 1.63;
+ Float_t dCM55J = 1.8;
//ALCM55J
+
Float_t aALCM55J[5]={12.0107,14.0067,15.9994,1.00794,26.981538};
Float_t zALCM55J[5]={6.,7.,8.,1.,13.};
Float_t wALCM55J[5]={0.817657902,0.0093488157,0.0503618265,0.0226320885,0.1};
Float_t dALCM55J = 1.9866;
//Si Chips
+
Float_t aSICHIP[6]={12.0107,14.0067,15.9994,1.00794,28.0855,107.8682};
Float_t zSICHIP[6]={6.,7.,8.,1.,14., 47.};
- Float_t wSICHIP[6]={0.039730642,0.001396798,0.01169634,
- 0.004367771,0.844665,0.09814344903};
+ Float_t wSICHIP[6]={0.039730642,0.001396798,0.01169634,0.004367771,0.844665,0.09814344903};
Float_t dSICHIP = 2.36436;
//Inox
- Float_t aINOX[9]={12.0107,54.9380, 28.0855,30.9738,32.066,
- 58.6928,55.9961,95.94,55.845};
+
+ Float_t aINOX[9]={12.0107,54.9380, 28.0855,30.9738,32.066,58.6928,51.9961,95.94,55.845};
Float_t zINOX[9]={6.,25.,14.,15.,16., 28.,24.,42.,26.};
Float_t wINOX[9]={0.0003,0.02,0.01,0.00045,0.0003,0.12,0.17,0.025,0.654};
Float_t dINOX = 8.03;
+ //AISI 304 L (from F.Tosello's web page - M.S. 18 Oct 10)
+
+ Float_t a304L[8]={12.0107,54.9380, 28.0855,30.9738,32.066,58.6928,51.9961,55.845};
+ Float_t z304L[8]={6.,25.,14.,15.,16., 28.,24.,26.};
+ Float_t w304L[8]={0.0003,0.02,0.01,0.00045,0.003,0.0925,0.19,0.6865};
+ Float_t d304L = 8.03;
+
//SDD HV microcable
+
Float_t aHVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
Float_t zHVm[5]={6.,1.,7.,8.,13.};
Float_t wHVm[5]={0.520088819984,0.01983871336,0.0551367996,0.157399667056, 0.247536};
Float_t dHVm = 1.6087;
//SDD LV+signal cable
+
Float_t aLVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
Float_t zLVm[5]={6.,1.,7.,8.,13.};
Float_t wLVm[5]={0.21722436468,0.0082859922,0.023028867,0.06574077612, 0.68572};
Float_t dLVm = 2.1035;
//SDD hybrid microcab
+
Float_t aHLVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
Float_t zHLVm[5]={6.,1.,7.,8.,13.};
Float_t wHLVm[5]={0.24281879711,0.00926228815,0.02574224025,0.07348667449, 0.64869};
Float_t dHLVm = 2.0502;
//SDD anode microcab
+
Float_t aALVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
Float_t zALVm[5]={6.,1.,7.,8.,13.};
- Float_t wALVm[5]={0.392653705471,0.0128595919215,
- 0.041626868025,0.118832707289, 0.431909};
+ Float_t wALVm[5]={0.392653705471,0.0128595919215,0.041626868025,0.118832707289, 0.431909};
Float_t dALVm = 2.0502;
- //X7R capacitors
- Float_t aX7R[7]={137.327,47.867,15.9994,58.6928,63.5460,118.710,207.2};
- Float_t zX7R[7]={56.,22.,8.,28.,29.,50.,82.};
- Float_t wX7R[7]={0.251639432,0.084755042,0.085975822,
- 0.038244751,0.009471271,0.321736471,0.2081768};
- Float_t dX7R = 7.14567;
+ //X7R capacitors - updated from F.Tosello's web page - M.S. 18 Oct 10
+
+ Float_t aX7R[6]={137.327,47.867,15.9994,58.6928,63.5460,118.710};
+ Float_t zX7R[6]={56.,22.,8.,28.,29.,50.};
+ Float_t wX7R[6]={0.524732,0.176736,0.179282,0.079750,0.019750,0.019750};
+ Float_t dX7R = 6.07914;
+
+ //X7R weld, i.e. Sn 60% Pb 40% (from F.Tosello's web page - M.S. 15 Oct 10)
+
+ Float_t aX7Rweld[2]={118.71 , 207.20};
+ Float_t zX7Rweld[2]={ 50. , 82. };
+ Float_t wX7Rweld[2]={ 0.60 , 0.40};
+ Float_t dX7Rweld = 8.52358;
// AIR
+
Float_t aAir[4]={12.0107,14.0067,15.9994,39.948};
Float_t zAir[4]={6.,7.,8.,18.};
Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827};
Float_t dAir = 1.20479E-3;
// Water
+
Float_t aWater[2]={1.00794,15.9994};
Float_t zWater[2]={1.,8.};
Float_t wWater[2]={0.111894,0.888106};
Float_t denscer = 3.6;
//G10FR4
- Float_t zG10FR4[14] = {14.00, 20.00, 13.00, 12.00, 5.00,
- 22.00, 11.00, 19.00, 26.00, 9.00,
- 8.00, 6.00, 7.00, 1.00};
- Float_t aG10FR4[14] = {28.0855000,40.0780000,26.9815380,24.3050000,
- 10.8110000,47.8670000,22.9897700,39.0983000,
- 55.8450000,18.9984000,15.9994000,12.0107000,
- 14.0067000,1.0079400};
- Float_t wG10FR4[14] = {0.15144894,0.08147477,0.04128158,0.00904554,
- 0.01397570,0.00287685,0.00445114,0.00498089,
- 0.00209828,0.00420000,0.36043788,0.27529426,
- 0.01415852,0.03427566};
+
+ Float_t zG10FR4[14] = {14.00, 20.00, 13.00, 12.00, 5.00, 22.00, 11.00, 19.00, 26.00, 9.00, 8.00, 6.00, 7.00, 1.00};
+ Float_t aG10FR4[14] = {28.0855000,40.0780000,26.9815380,24.3050000,10.8110000,47.8670000,22.9897700,39.0983000,55.8450000,18.9984000,15.9994000,12.0107000,14.0067000,1.0079400};
+ Float_t wG10FR4[14] = {0.15144894,0.08147477,0.04128158,0.00904554,0.01397570,0.00287685,0.00445114,0.00498089,0.00209828,0.00420000,0.36043788,0.27529426,0.01415852,0.03427566};
Float_t densG10FR4= 1.8;
//--- EPOXY --- C18 H19 O3
// rohacell: C9 H13 N1 O2
Float_t arohac[4] = {12.01, 1.01, 14.010, 16.};
Float_t zrohac[4] = { 6., 1., 7., 8.};
- Float_t wrohac[4] = { 9., 13., 1., 2.};
- Float_t drohac = 0.05;
+ Float_t wrohac[4] = { 14., 10., 2., 6.};
+ Float_t drohac = 0.052;
// If he/she means stainless steel (inox) + Aluminium and Zeff=15.3383 then
//
Float_t wInAl[5] = {.816164, .131443,.0330906,.0183836,.000919182};
Float_t dInAl = 3.075;
+ // Aluminum alloy with 12% Copper - 21 Oct 10
+
+ Float_t aAlCu12[2] = {26.9815, 63.546};
+ Float_t zAlCu12[2] = {13. , 29. };
+ Float_t wAlCu12[2] = { 0.88 , 0.12 };
+ Float_t dAlCu12 = 2.96;
+
// Kapton
+
Float_t aKapton[4]={1.00794,12.0107, 14.010,15.9994};
Float_t zKapton[4]={1.,6.,7.,8.};
Float_t wKapton[4]={0.026362,0.69113,0.07327,0.209235};
Float_t dKapton = 1.42;
+
+ // Kapton + Cu (for Pixel Bus)
+
+ Float_t aKaptonCu[5]={1.00794, 12.0107, 14.010, 15.9994, 63.5460};
+ Float_t zKaptonCu[5]={1., 6., 7., 8., 29.};
+ Float_t wKaptonCuBus[5];
+
+ // Kapton + Cu (for Pixel MCM)
+
+ Float_t wKaptonCuMCM[5];
+
+ // Kapton + Cu (mix of two above)
+
+ Float_t wKaptonCuMix[5];
//SDD ruby sph.
Float_t aAlOxide[2] = { 26.981539,15.9994};
Float_t wAlOxide[2] = {0.4707, 0.5293};
Float_t dAlOxide = 3.97;
- //---------
- AliMaterial(1,"ITSsddSi",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(1,"ITSsddSi",1,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
-
- AliMixture(5,"ITSair",aAir,zAir,dAir,4,wAir);
- AliMedium(5,"ITSair",5,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
-
- AliMixture(7,"ITSsddSiChip",aSICHIP,zSICHIP,dSICHIP,6,wSICHIP);
- AliMedium(7,"ITSsddSiChip",7,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
-
- AliMaterial(79,"SDD SI insensitive$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(79,"SDD SI insensitive$",79,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(11,"ITSal",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
- AliMedium(11,"ITSal",11,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(9,"ITSsddCarbonM55J",aCM55J,zCM55J,dCM55J,4,wCM55J);
- AliMedium(9,"ITSsddCarbonM55J",9,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(10,"SDD AIR$",aAir,zAir,dAir,4,wAir);
- AliMedium(10,"SDD AIR$",10,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
-
- AliMixture(12, "WATER",aWater,zWater,dWater,2,wWater);
- AliMedium(12,"WATER",12,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(69,"ITSsddCAlM55J",aALCM55J,zALCM55J,dALCM55J,5,wALCM55J);
- AliMedium(69,"ITSsddCAlM55J",69,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(70, "ITSsddKAPTON_POLYCH2", aKapton, zKapton, dKapton, 4, wKapton);
- AliMedium(70,"ITSsddKAPTON_POLYCH2",70,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(77,"SDDX7Rcapacitors",aX7R,zX7R,dX7R,7,wX7R);
- AliMedium(77,"SDDX7Rcapacitors",77,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(78,"SDD ruby sph. Al2O3$",aAlOxide,zAlOxide,dAlOxide,2,wAlOxide);
- AliMedium(78,"SDD ruby sph. Al2O3$",78,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
-
- AliMaterial(64,"ALUMINUM$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
- AliMedium(64,"ALUMINUM$",64,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(14,"COPPER",0.63546E+02,0.29000E+02,0.89600E+01,0.14300E+01,0.99900E+03);
- AliMedium(14,"COPPER",14,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+ // Silica for optical fibers: Si O2
+ Float_t aoptfib[2] = { 28.0855, 15.9994};
+ Float_t zoptfib[2] = { 14., 8. };
+ Float_t woptfib[2] = { 1., 2. };
+ Float_t doptfib = 2.55;
+
+ // Tetrafluorethylene-Perfluorpropylene (FEP) - 08 Mar 10
+ Float_t aFEP[2] = { 12.0107, 18.9984};
+ Float_t zFEP[2] = { 6. , 9. };
+ Float_t wFEP[2] = { 1. , 2. };
+ Float_t dFEP = 2.15;
+
+ // PVC (C2H3Cl)n - 08 Jul 10
+ Float_t aPVC[3] = { 12.0107, 1.00794, 35.4527};
+ Float_t zPVC[3] = { 6. , 1. , 35. };
+ Float_t wPVC[3] = { 2. , 3. , 1. };
+ Float_t dPVC = 1.3;
+
+ // PBT (Polybutylene terephthalate = C12-H12-O4) - 01 Sep 10
+ Float_t aPBT[3] = { 12.0107, 1.00794, 15.9994};
+ Float_t zPBT[3] = { 6. , 1. , 8. };
+ Float_t wPBT[3] = { 12. ,12. , 4. };
+ Float_t dPBT = 1.31;
+
+ // POLYAX (POLYAX = C37-H24-O6-N2) - 03 Sep 10
+ Float_t aPOLYAX[4] = { 12.0107, 1.00794, 15.9994, 14.00674};
+ Float_t zPOLYAX[4] = { 6. , 1. , 8. , 7. };
+ Float_t wPOLYAX[4] = { 37. ,24. , 6. , 2. };
+ Float_t dPOLYAX = 1.27;
+
+ // PPS (PPS = C6-H4-S) - 05 Sep 10
+ Float_t aPPS[3] = { 12.0107, 1.00794, 32.066};
+ Float_t zPPS[3] = { 6. , 1. , 16. };
+ Float_t wPPS[3] = { 6. , 4. , 1. };
+ Float_t dPPS = 1.35;
+
+ // Megolon (Polyolefin = (C-H2)n) - 20 Oct 10
+ Float_t aMegolon[2] = { 12.0107, 1.00794};
+ Float_t zMegolon[2] = { 6. , 1. };
+ Float_t wMegolon[2] = { 1. , 2. };
+ Float_t dMegolon = 1.51; // Mean of various types
+
+ // Standard glass (from glassproperties.com/glasses - M.S. 21 Oct 10)
+ Float_t aStdGlass[7] = {15.9994 ,28.0855 ,22.98977 ,40.078 ,
+ 24.305 ,26.981539,39.0983 };
+ Float_t zStdGlass[7] = { 8. ,14. ,11. ,20. ,
+ 12. ,13. ,19. };
+ Float_t wStdGlass[7] = { 0.468377, 0.348239, 0.096441, 0.071469,
+ 0.006030, 0.005293, 0.004151};
+ Float_t dStdGlass = 2.53;
+
+ // Glass Fiber (from F.Tosello's web page - M.S. 15 Oct 10)
+ Float_t aGlass[11] = {15.9994 ,28.0855 ,40.078 ,26.981539,10.811 ,
+ 24.305 ,39.0983 ,22.98977 ,18.9984 ,47.867 ,55.845};
+ Float_t zGlass[11] = { 8. ,14. ,20 ,13 , 5 ,
+ 12. ,19 ,11 , 9 ,22 ,26 };
+ Float_t wGlass[11] = { 0.473610, 0.252415, 0.135791, 0.068803, 0.023293,
+ 0.015076, 0.008301, 0.007419, 0.007000, 0.004795, 0.003497};
+ Float_t dGlass = 2.61;
+
+ // Ryton R-4 04 (from F.Tosello's web page - M.S. 15 Oct 10)
+ Float_t aRyton[14] = {15.9994 ,28.0855 ,40.078 ,26.981539,10.811 ,
+ 24.305 ,39.0983 ,22.98977 ,18.9984 ,47.867 ,
+ 55.845 ,12.0107 , 1.00794 ,32.066 };
+ Float_t zRyton[14] = { 8. ,14. ,20. ,13. , 5. ,
+ 12. ,19. ,11. , 9. ,22. ,
+ 26. , 6. , 1. ,16. };
+ Float_t wRyton[14] = { 0.189445, 0.100966, 0.054316, 0.027521, 0.009317,
+ 0.006030, 0.003320, 0.002968, 0.002800, 0.001918,
+ 0.001399, 0.399760, 0.022365, 0.177875};
+ Float_t dRyton = 1.65;
+
+ // Plexiglas (Poly(methyl methacrylate) (C5O2H8)n - M.S. 05 nov 10)
+ Float_t aPlexy[3] = { 12.0107, 15.9994, 1.00794};
+ Float_t zPlexy[3] = { 6. , 8. , 1. };
+ Float_t wPlexy[3] = { 5. , 2. , 8. };
+ Float_t dPlexy = 1.18;
+
+ //SSD NiSn capacitor ends
+ Float_t aNiSn[2] = { 56.6934,118.710};
+ Float_t zNiSn[2] = { 28., 50.};
+ Float_t wNiSn[2] = {0.33, 0.67};
+ Float_t dNiSn = wNiSn[0]*8.908 + wNiSn[1]*7.310;
+
+ AliMaterial(1,"SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
+ AliMedium(1,"SI$",1,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
AliMaterial(2,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
AliMedium(2,"SPD SI CHIP$",2,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
AliMixture(4,"C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
AliMedium(4,"C (M55J)$",4,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
+ AliMixture(5,"AIR$",aAir,zAir,dAir,4,wAir);
+ AliMedium(5,"AIR$",5,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
+
AliMixture(6,"GEN AIR$",aAir,zAir,dAir,4,wAir);
AliMedium(6,"GEN AIR$",6,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
+ AliMixture(7,"SDD SI CHIP$",aSICHIP,zSICHIP,dSICHIP,6,wSICHIP);
+ AliMedium(7,"SDD SI CHIP$",7,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
+
+ AliMixture(9,"SDD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
+ AliMedium(9,"SDD C (M55J)$",9,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(10,"SDD AIR$",aAir,zAir,dAir,4,wAir);
+ AliMedium(10,"SDD AIR$",10,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
+
+ AliMaterial(11,"AL$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
+ AliMedium(11,"AL$",11,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(12, "Water$",aWater,zWater,dWater,2,wWater);
+ AliMedium(12,"WATER$",12,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
AliMixture(13,"Freon$",afre,zfre,densfre,-2,wfre);
AliMedium(13,"Freon$",13,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
+ AliMaterial(14,"COPPER$",0.63546E+02,0.29000E+02,0.89600E+01,0.14300E+01,0.99900E+03);
+ AliMedium(14,"COPPER$",14,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMixture(15,"CERAMICS$",acer,zcer,denscer,5,wcer);
AliMedium(15,"CERAMICS$",15,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMixture(27,"GEN Air$",aAir,zAir,dAir,4,wAir);
AliMedium(27,"GEN Air$",27,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
+ AliMixture(35,"PLEXYGLAS$",aPlexy,zPlexy,dPlexy,-3,wPlexy);
+ AliMedium(35,"PLEXYGLAS$",35,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(36,"STDGLASS$",aStdGlass,zStdGlass,dStdGlass,7,wStdGlass);
+ AliMedium(36,"STDGLASS$",36,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(37,"ALCU12$",aAlCu12,zAlCu12,dAlCu12,2,wAlCu12);
+ AliMedium(37,"ALCU12$",37,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(38,"MEGOLON$",aMegolon,zMegolon,dMegolon,-2,wMegolon);
+ AliMedium(38,"MEGOLON$",38,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(39,"RYTON$",aRyton,zRyton,dRyton,14,wRyton);
+ AliMedium(39,"RYTON$",39,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(40,"GLASS FIBER$",aGlass,zGlass,dGlass,11,wGlass);
+ AliMedium(40,"GLASS FIBER$",40,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(41,"AISI304L$",a304L,z304L,d304L,8,w304L);
+ AliMedium(41,"AISI304L$",41,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMaterial(42,"NICKEL$",0.58693E+02,0.28000E+02,0.89080E+01,0.14200E+01,0.99900E+03);
+ AliMedium(42,"NICKEL$",42,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(43,"SDD X7R weld$",aX7Rweld,zX7Rweld,dX7Rweld,2,wX7Rweld);
+ AliMedium(43,"SDD X7R weld$",43,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(44,"PPS$",aPPS,zPPS,dPPS,-3,wPPS);
+ AliMedium(44,"PPS$",44,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(45,"POLYAX$",aPOLYAX,zPOLYAX,dPOLYAX,-4,wPOLYAX);
+ AliMedium(45,"POLYAX$",45,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(46,"PBT$",aPBT,zPBT,dPBT,-3,wPBT);
+ AliMedium(46,"PBT$",46,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(47,"PVC$",aPVC,zPVC,dPVC,-3,wPVC);
+ AliMedium(47,"PVC$",47,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ Double_t cuFrac = 0.56;
+ Double_t kFrac = 1.0 - cuFrac;
+ Double_t cuDens = 8.96;
+ Float_t dKaptonCuBus = cuFrac * cuDens + kFrac * dKapton;
+ for (Int_t j=0; j<4; j++)
+ wKaptonCuBus[j] = wKapton[j]*kFrac;
+ wKaptonCuBus[4] = cuFrac;
+ AliMixture(48, "SPD-BUS CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuBus, 5, wKaptonCuBus);
+ AliMedium(48,"SPD-BUS CU KAPTON$",48,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ cuFrac = 0.5;
+ kFrac = 1.0 - cuFrac;
+ Float_t dKaptonCuMCM = cuFrac * cuDens + kFrac * dKapton;
+ for (Int_t j=0; j<4; j++)
+ wKaptonCuMCM[j] = wKapton[j]*kFrac;
+ wKaptonCuMCM[4] = cuFrac;
+ AliMixture(49, "SPD-MCM CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuMCM, 5, wKaptonCuMCM);
+ AliMedium(49,"SPD-MCM CU KAPTON$",49,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ cuFrac = (0.56 + 0.5) / 2.0;
+ kFrac = 1.0 - cuFrac;
+ Float_t dKaptonCuMix = cuFrac * cuDens + kFrac * dKapton;
+ for (Int_t j=0; j<4; j++)
+ wKaptonCuMix[j] = wKapton[j]*kFrac;
+ wKaptonCuMix[4] = cuFrac;
+ AliMixture(50, "SPD-MIX CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuMix, 5, wKaptonCuMix);
+ AliMedium(50,"SPD-MIX CU KAPTON$",50,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
AliMaterial(51,"SPD SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
AliMedium(51,"SPD SI$",51,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
AliMixture(56, "SPD KAPTON(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
AliMedium(56,"SPD KAPTON(POLYCH2)$",56,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+ // Gaseous Freon has same chemical composition but air density at 1.7 atm
+ AliMixture(59,"GASEOUS FREON$",afre,zfre,1.7*dAir,-2,wfre);
+ AliMedium(59,"GASEOUS FREON$",59,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
AliMixture(61,"EPOXY$",aEpoxy,zEpoxy,dEpoxy,-3,wEpoxy);
AliMedium(61,"EPOXY$",61,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMixture(63, "KAPTONH(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
AliMedium(63,"KAPTONH(POLYCH2)$",63,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+ AliMaterial(64,"ALUMINUM$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
+ AliMedium(64,"ALUMINUM$",64,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMixture(65,"INOX$",aINOX,zINOX,dINOX,9,wINOX);
AliMedium(65,"INOX$",65,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+ AliMixture(66,"NiSn$",aNiSn,zNiSn,dNiSn,2,wNiSn);
+ AliMedium(66,"NiSn$",66,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMaterial(67,"Sn$", 118.710, 50., 7.310, 1.206, 999.);
+ AliMedium(67,"Sn$",67,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
AliMixture(68,"ROHACELL$",arohac,zrohac,drohac,-4,wrohac);
AliMedium(68,"ROHACELL$",68,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+ AliMixture(69,"SDD C AL (M55J)$",aALCM55J,zALCM55J,dALCM55J,5,wALCM55J);
+ AliMedium(69,"SDD C AL (M55J)$",69,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(70, "SDDKAPTON (POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
+ AliMedium(70,"SDDKAPTON (POLYCH2)$",70,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMaterial(71,"ITS SANDW A$",0.12011E+02,0.60000E+01,0.2115E+00,0.17479E+03,0.99900E+03);
AliMedium(71,"ITS SANDW A$",71,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMaterial(75,"ELASTO SIL$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
AliMedium(75,"ELASTO SIL$",75,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(76,"SPDBUS(AL+KPT+EPOX)$",0.19509E+02,0.96502E+01,0.19060E+01,0.15413E+02,0.99900E+03);
+ // SPD bus (data from Petra Riedler)
+ Float_t aSPDbus[5] = {1.00794,12.0107,14.01,15.9994,26.982 };
+ Float_t zSPDbus[5] = {1.,6.,7.,8.,13.};
+ Float_t wSPDbus[5] = {0.023523,0.318053,0.009776,0.078057,0.570591};
+ Float_t dSPDbus = 2.128505;
+
+ // AliMaterial(76,"SPDBUS(AL+KPT+EPOX)$",0.19509E+02,0.96502E+01,0.19060E+01,0.15413E+02,0.99900E+03);
+ AliMixture(76,"SPDBUS(AL+KPT+EPOX)$",aSPDbus,zSPDbus,dSPDbus,5,wSPDbus);
AliMedium(76,"SPDBUS(AL+KPT+EPOX)$",76,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+ AliMixture(77,"SDD X7R capacitors$",aX7R,zX7R,dX7R,6,wX7R);
+ AliMedium(77,"SDD X7R capacitors$",77,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(78,"SDD ruby sph. Al2O3$",aAlOxide,zAlOxide,dAlOxide,2,wAlOxide);
+ AliMedium(78,"SDD ruby sph. Al2O3$",78,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMaterial(79,"SDD SI insensitive$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
+ AliMedium(79,"SDD SI insensitive$",79,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMixture(80,"SDD HV microcable$",aHVm,zHVm,dHVm,5,wHVm);
AliMedium(80,"SDD HV microcable$",80,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMixture(83,"SDD anode microcab$",aALVm,zALVm,dALVm,5,wALVm);
AliMedium(83,"SDD anode microcab$",83,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(84,"SDD/SSD rings$",0.123565E+02,0.64561E+01,0.18097E+01,0.229570E+02,0.99900E+03);
+ Float_t aDSring[4]={12.0107, 1.00794, 14.0067, 15.9994};
+ Float_t zDSring[4]={ 6., 1., 7., 8.};
+ Float_t wDSring[4]={ 0.854323888, 0.026408778, 0.023050265, 0.096217069};
+ Float_t dDSring = 0.2875;
+ AliMixture(84,"SDD/SSD rings$",aDSring,zDSring,dDSring,4,wDSring);
AliMedium(84,"SDD/SSD rings$",84,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMixture(85,"inox/alum$",aInAl,zInAl,dInAl,5,wInAl);
AliMedium(85,"inox/alum$",85,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
// special media to take into account services in the SDD and SSD
// cones for the FMD
-
- Float_t aA[13],zZ[13],wW[13],den;
+ //Begin_Html
+ /*
+ <A HREF="http://www.Physics.ohio-state.edu/~nilsen/ITS/ITS_MatBudget_4B.xls">
+ </pre>
+ <br clear=left>
+ <font size=+2 color=blue>
+ <p> The Exel spread sheet from which these density number come from.
+ </font></A>
+ */
+ //End_Html
+
+ // AliMaterial(86,"AIRFMDSDD$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
+ Float_t aA[13],zZ[13],wW[13],den;
// From Pierluigi Barberis calculations of 2SPD+1SDD October 2 2002.
zZ[0] = 1.0; aA[0] = 1.00794; // Hydrogen
zZ[1] = 6.0; aA[1] = 12.011; // Carbon
AliMedium(86,"AIRFMDSDD$",86,0,ifield,fieldm,tmaxfdAir,stemaxAir,
deemaxAir,epsilAir,stminAir);
-
+ //AliMaterial(87,"AIRFMDSSD$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
+ // From Pierluigi Barberis calculations of SSD October 2 2002.
wW[0] = 0.019777;
wW[1] = 0.325901;
wW[2] = 0.031848;
AliMedium(87,"AIRFMDSSD$",87,0,ifield,fieldm,tmaxfdAir,stemaxAir,
deemaxAir,epsilAir,stminAir);
+ //AliMaterial(88,"ITS SANDW CFMDSDD$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
+ // From Pierluigi Barberis calculations of 1SDD+Carbon fiber October 2 2002
wW[0] = 0.016302;
wW[1] = 0.461870;
wW[2] = 0.033662;
AliMedium(88,"ITS SANDW CFMDSDD$",88,0,ifield,fieldm,tmaxfd,stemax,
deemax,epsil,stmin);
+ //AliMaterial(89,"ITS SANDW CFMDSSD$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
+ // From Pierluigi Barberis calculations of SSD+Carbon fiber October 2 2002.
wW[0] = 0.014065;
wW[1] = 0.520598;
wW[2] = 0.022650;
AliMedium(89,"ITS SANDW CFMDSSD$",89,0,ifield,fieldm,tmaxfd,stemax,
deemax,epsil,stmin);
+ //AliMaterial(97,"SPD SERVICES$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
+ // From Pierluigi Barberis calculations of 1SPD October 2 2002.
wW[0] = 0.005970;
wW[1] = 0.304704;
wW[2] = 0.042510;
AliMedium(97,"SPD SERVICES$",97,0,ifield,fieldm,tmaxfd,stemax,
deemax,epsil,stmin);
+
// Special media
- AliMaterial(90,"SPD shield$", 12.011, 6., 1.93/10. , 22.1*10., 999);
- AliMedium(90,"SPD shield$",90,0,ifield,fieldm,tmaxfdServ,stemaxServ,
- deemaxServ,epsilServ,stminServ);
+ AliMaterial(90,"SPD shield$", 12.011, 6., 1.93 , 22.36, 999);
+ AliMedium(90,"SPD shield$",90,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
- AliMaterial(91, "SPD End ladder$", 47.0447, 21.7963, 3.6374, 4.4711, 999);
- AliMedium(91,"SPD End ladder$",91,0,ifield,fieldm,tmaxfdServ,stemaxServ,
- deemaxServ,epsilServ,stminServ);
+ // SPD End Ladder (data from Petra Riedler)
+ Float_t aSPDel[5] = {1.00794,12.0107,14.01,15.9994,63.54 };
+ Float_t zSPDel[5] = {1.,6.,7.,8.,29.};
+ Float_t wSPDel[5] = {0.004092,0.107274,0.011438,0.032476,0.844719};
+ Float_t dSPDel = 3.903403;
- AliMaterial(92, "SPD cone$",28.0855, 14., 2.33, 9.36, 999);
- AliMedium(92,"SPD cone$",92,0,ifield,fieldm,tmaxfdServ,stemaxServ,
- deemaxServ,epsilServ,stminServ);
-
-// Material with fractional Z not actually used
-// AliMaterial(93, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999);
-// AliMedium(93,"SDD End ladder$",93,0,ifield,fieldm,tmaxfdServ,stemaxServ,
-// deemaxServ,epsilServ,stminServ);
+ // AliMaterial(91, "SPD End ladder$", 47.0447, 21.7963, 3.6374, 4.4711, 999);
+ AliMixture(91,"SPD End ladder$",aSPDel,zSPDel,dSPDel,5,wSPDel);
+ AliMedium(91,"SPD End ladder$",91,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
+ AliMaterial(92, "SPD cone$",28.0855, 14., 2.33, 9.36, 999);
+ AliMedium(92,"SPD cone$",92,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
+ /* Material with fractional Z not actually used
+ AliMaterial(93, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999);
+ AliMedium(93,"SDD End ladder$",93,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
+ */
AliMaterial(94, "SDD cone$",63.546, 29., 1.15, 1.265, 999);
- AliMedium(94,"SDD cone$",94,0,ifield,fieldm,tmaxfdServ,stemaxServ,
- deemaxServ,epsilServ,stminServ);
-
-// Material with fractional Z not actually used
-// AliMaterial(95, "SSD End ladder$", 32.0988, 15.4021, 0.68, 35.3238, 999);
-// AliMedium(95,"SSD End ladder$",95,0,ifield,fieldm,tmaxfdServ,stemaxServ,
-// deemaxServ,epsilServ,stminServ);
-
+ AliMedium(94,"SDD cone$",94,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
+ /* Material with fractional Z not actually used
+ AliMaterial(95, "SSD End ladder$", 32.0988, 15.4021, 0.68, 35.3238, 999);
+ AliMedium(95,"SSD End ladder$",95,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
+ */
AliMaterial(96, "SSD cone$",63.546, 29., 1.15, 1.265, 999);
- AliMedium(96,"SSD cone$",96,0,ifield,fieldm,tmaxfdServ,stemaxServ,
- deemaxServ,epsilServ,stminServ);
-
-}
-
-
-//______________________________________________________________________
-void AliITSv11::InitAliITSgeom(){
- //
- // Fill fITSgeom with the 3 sub-detector geometries
- //
-
- const Int_t knlayers = 2; // only SDD for the moment
- Int_t nlad[knlayers],ndet[knlayers];
- nlad[0]=14; nlad[1]=22;
- ndet[0]=6; ndet[1]=8;
- Int_t mod = nlad[0]*ndet[0]+nlad[1]*ndet[1];
- if (fITSgeom) delete fITSgeom;
- fITSgeom = new AliITSgeom(0,knlayers,nlad,ndet,mod);
+ AliMedium(96,"SSD cone$",96,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
+
+ AliMixture(98,"SDD OPTICFIB$",aoptfib,zoptfib,doptfib,-2,woptfib);
+ AliMedium(98,"SDD OPTICFIB$",98,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(95,"SSD FEP$",aFEP,zFEP,dFEP,-2,wFEP);
+ AliMedium(95,"SSD FEP$",95,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ // Mean material for low-voltage cables on SPD trays Side A
+ // (Copper + PolyEthylene (C2-H4)) (D.Elia for cable number and
+ // cross-section area, M.Sitta for elemental computation) - 26 Feb 10
+ wW[0] = 0.323024;//H
+ wW[2] = 0.515464;//Cu
+ wW[1] = 0.161512;//C
+ wW[3] = 0.000000;//O
+ wW[4] = 0.000000;//S
+ wW[5] = 0.000000;//F
+ wW[6] = 0.000000;//Sn
+ wW[7] = 0.000000;//Pb
+ wW[8] = 0.000000;//Cr
+ wW[9] = 0.000000;//Si
+ wW[10] = 0.000000;//Ni
+ wW[11] = 0.000000;//Ca
+
+ den = 5.078866;
+ AliMixture(60,"SPD_LOWCABLES$",aA,zZ,den,+3,wW);
+ AliMedium(60,"SPD_LOWCABLES$",60,0,ifield,fieldm,tmaxfd,stemax,
+ deemax,epsil,stmin);
+ // Mean material for high-voltage cables on SPD trays Side A & C
+ // (Copper + HD PolyEthylene (C2-H2)) (D.Elia for cable number and
+ // cross-section area, M.Sitta for elemental computation) - 10 Jun 10
+ wW[0] = 0.083766;//H
+ wW[2] = 0.417136;//Cu
+ wW[1] = 0.499098;//C
+ wW[3] = 0.000000;//O
+ wW[4] = 0.000000;//S
+ wW[5] = 0.000000;//F
+ wW[6] = 0.000000;//Sn
+ wW[7] = 0.000000;//Pb
+ wW[8] = 0.000000;//Cr
+ wW[9] = 0.000000;//Si
+ wW[10] = 0.000000;//Ni
+ wW[11] = 0.000000;//Ca
+
+ den = 1.514930;
+ AliMixture(58,"SPD_HICABLES$",aA,zZ,den,+3,wW);
+ AliMedium(58,"SPD_HICABLES$",58,0,ifield,fieldm,tmaxfd,stemax,
+ deemax,epsil,stmin);
- //***************************************************
- // Set default shapes
- // (These default shapes won't exist anymore when all
- // layers are coded)
+ // PolyUrethane [C25-H42-N2-O6] - 07 Mar 10
+ zZ[2] = 7.0; aA[2] = 14.0067; // Nitrogen - From Root TGeoElementTable
+
+ wW[0] = 0.090724;//H
+ wW[2] = 0.060035;//N
+ wW[1] = 0.643513;//C
+ wW[3] = 0.205728;//O
+ wW[4] = 0.000000;//S
+ wW[5] = 0.000000;//F
+ wW[6] = 0.000000;//Sn
+ wW[7] = 0.000000;//Pb
+ wW[8] = 0.000000;//Cr
+ wW[9] = 0.000000;//Si
+ wW[10] = 0.000000;//Ni
+ wW[11] = 0.000000;//Ca
+
+ den = 1.158910;
+ AliMixture(67,"POLYURETHANE$",aA,zZ,den,+4,wW);
+ AliMedium(67,"POLYURETHANE$",67,0,ifield,fieldm,tmaxfd,stemax,
+ deemax,epsil,stmin);
- const Float_t kDxyzSPD[] = {0.6400, 0.015, 3.480};
- if(!(fITSgeom->IsShapeDefined(kSPD)))
- fITSgeom->ReSetShape(kSPD,
- new AliITSgeomSPD425Short(3,(Float_t *)kDxyzSPD));
+ // POM (Polyoxymethylene = (CH2O)n ) - 02 May 10
+ zZ[2] = 8.0; aA[2] = 15.9994; // Oxigen
+
+ wW[0] = 0.067137;//H
+ wW[1] = 0.400016;//C
+ wW[2] = 0.532847;//O
+ wW[3] = 0.000000;//O
+ wW[4] = 0.000000;//S
+ wW[5] = 0.000000;//F
+ wW[6] = 0.000000;//Sn
+ wW[7] = 0.000000;//Pb
+ wW[8] = 0.000000;//Cr
+ wW[9] = 0.000000;//Si
+ wW[10] = 0.000000;//Ni
+ wW[11] = 0.000000;//Ca
+
+ den = 1.4200;
+ AliMixture(57,"POLYOXYMETHYLENE$",aA,zZ,den,+3,wW);
+ AliMedium(57,"POLYOXYMETHYLENE$",57,0,ifield,fieldm,tmaxfd,stemax,
+ deemax,epsil,stmin);
- const Float_t kDxyzSSD[] = {3.6500, 0.0150, 2.000};
- if(!(fITSgeom->IsShapeDefined(kSSD)))
- fITSgeom->ReSetShape(kSSD,
- new AliITSgeomSSD75and275(3,(Float_t *)kDxyzSSD));
- //*****************************************
- fSDDgeom->ExportSensorGeometry(fITSgeom, +1, 0); //SDD
+ // Anticorodal (Aliminum alloy) - 08 nov 10
+ // A,Z from Root TGeoElementTable, W from Web sites
+ zZ[0] = 13.0; aA[0] = 26.9815; // Aluminium
+ zZ[1] = 29.0; aA[1] = 63.546 ; // Copper
+ zZ[2] = 26.0; aA[2] = 55.845 ; // Iron
+ zZ[3] = 25.0; aA[3] = 54.938 ; // Manganese
+ zZ[4] = 12.0; aA[4] = 24.305 ; // Magnesium
+ zZ[5] = 14.0; aA[5] = 28.0855; // Silicon
+ zZ[6] = 30.0; aA[6] = 65.39 ; // Zinc
+ zZ[7] = 24.0; aA[7] = 51.9961; // Chromium
+ zZ[8] = 22.0; aA[8] = 47.867 ; // Titanium
+
+ wW[1] = 0.001000;//Cu
+ wW[2] = 0.005000;//Fe
+ wW[3] = 0.007000;//Mn - mean value
+ wW[4] = 0.009000;//Mg - mean value
+ wW[5] = 0.001000;//Si - mean value
+ wW[6] = 0.002000;//Zn
+ wW[7] = 0.002500;//Cr
+ wW[8] = 0.001000;//Ti
+
+ Double_t totFrac = 0;
+ for (Int_t j=1; j<9; j++)
+ totFrac += wW[j];
+ wW[0] = 1. - totFrac;//Al - the remainder
+
+ den = 2.69;
+ AliMixture(93,"ANTICORODAL$",aA,zZ,den,+9,wW);
+ AliMedium(93,"ANTICORODAL$",93,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ // Hokotol (another Aluminium alloy) - 08 nov 10
+ // A,Z from Root TGeoElementTable, W from Web sites
+ zZ[0] = 13.0; aA[0] = 26.9815; // Aluminium
+ zZ[1] = 29.0; aA[1] = 63.546 ; // Copper
+ zZ[2] = 26.0; aA[2] = 55.845 ; // Iron
+ zZ[3] = 25.0; aA[3] = 54.938 ; // Manganese
+ zZ[4] = 12.0; aA[4] = 24.305 ; // Magnesium
+ zZ[5] = 14.0; aA[5] = 28.0855; // Silicon
+ zZ[6] = 30.0; aA[6] = 65.39 ; // Zinc
+ zZ[7] = 24.0; aA[7] = 51.9961; // Chromium
+ zZ[8] = 22.0; aA[8] = 47.867 ; // Titanium
+ zZ[9] = 40.0; aA[9] = 91.224 ; // Zirconium
+
+ wW[1] = 0.020500;//Cu - mean value
+ wW[2] = 0.000300;//Fe
+ wW[3] = 0.022000;//Mn - mean value
+ wW[4] = 0.001000;//Mg - mean value
+ wW[5] = 0.002000;//Si - mean value
+ wW[6] = 0.066500;//Zn
+ wW[7] = 0.005000;//Cr
+ wW[8] = 0.000600;//Ti
+ wW[9] = 0.001650;//Zr - mean value
+
+ totFrac = 0;
+ for (Int_t j=1; j<10; j++)
+ totFrac += wW[j];
+ wW[0] = 1. - totFrac;//Al - the remainder
+
+ den = 2.69;
+ AliMixture(34,"HOKOTOL$",aA,zZ,den,+10,wW);
+ AliMedium(34,"HOKOTOL$",34,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ // Ergal (7075) (yet another Aluminium alloy) - 09 nov 10
+ // A,Z from Root TGeoElementTable, W from Web sites
+ zZ[0] = 13.0; aA[0] = 26.9815; // Aluminium
+ zZ[1] = 29.0; aA[1] = 63.546 ; // Copper
+ zZ[2] = 26.0; aA[2] = 55.845 ; // Iron
+ zZ[3] = 25.0; aA[3] = 54.938 ; // Manganese
+ zZ[4] = 12.0; aA[4] = 24.305 ; // Magnesium
+ zZ[5] = 14.0; aA[5] = 28.0855; // Silicon
+ zZ[6] = 30.0; aA[6] = 65.39 ; // Zinc
+ zZ[7] = 24.0; aA[7] = 51.9961; // Chromium
+ zZ[8] = 22.0; aA[8] = 47.867 ; // Titanium
+
+ wW[1] = 0.016000;//Cu - mean value
+ wW[2] = 0.005000;//Fe
+ wW[3] = 0.003000;//Mn
+ wW[4] = 0.025000;//Mg - mean value
+ wW[5] = 0.004000;//Si
+ wW[6] = 0.056000;//Zn - mean value
+ wW[7] = 0.002300;//Cr - mean value
+ wW[8] = 0.002000;//Ti
+
+ totFrac = 0;
+ for (Int_t j=1; j<9; j++)
+ totFrac += wW[j];
+ wW[0] = 1. - totFrac;//Al - the remainder
+
+ den = 2.69;
+ AliMixture(33,"ERGAL$",aA,zZ,den,+9,wW);
+ AliMedium(33,"ERGAL$",33,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- return;
}
-
//______________________________________________________________________
-void AliITSv11::Init(){
- //
- // Initialise the ITS after it has been created.
- //
-
- Int_t i;
-
- for(i=0;i<20;i++) printf("*");
- printf( " ITSv%i.%i_Init ", fMajorVersion,fMinorVersion );
- for(i=0;i<20;i++) printf("*"); printf("\n");
-
- // Create geometry
- if(fRead[0]=='\0') strncpy(fRead,fEuclidGeomDet,60);
- if(fWrite[0]=='\0') strncpy(fWrite,fEuclidGeomDet,60);
- if(fITSgeom!=0) delete fITSgeom;
- fITSgeom = new AliITSgeom();
- if(fGeomDetIn) fITSgeom->ReadNewFile(fRead);
- else this->InitAliITSgeom();
- if(fGeomDetOut) fITSgeom->WriteNewFile(fWrite);
-
- // Initialize AliITS
+void AliITSv11::Init()
+{
+ // Initialise the ITS after it has been created.
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return:
+ // none.
+
+ AliDebug(1,Form("Init: Major version %d Minor version %d",fMajorVersion,
+ fMinorVersion));
+ UpdateInternalGeometry();
AliITS::Init();
- for(i=0;i<40+16;i++) printf("*"); printf("\n");
+ fIDMother = gMC->VolId("ITSV"); // ITS Mother Volume ID.
}
-
//______________________________________________________________________
-void AliITSv11::SetDefaults(){
- //
- // Set response ans segmentation models for SPD, SDD and SSD
- //
-
- printf("AliITSv11::SetDefaults :\n");
- const Float_t kconv = 1.0e+04; // convert cm to microns
-
- AliITSDetType *iDetType;
- AliITSgeomSPD *s0;
- AliITSgeomSDD *s1;
- AliITSgeomSSD *s2;
- Int_t i;
- Float_t bx[256],bz[280];
-
- //================================================ SPD
- iDetType=DetType(kSPD);
- s0 = (AliITSgeomSPD*) fITSgeom->GetShape(kSPD);// Get shape info. Do it this way for now.
- // If some SPD detectors have been inserted in t
- if (s0) {
- AliITSresponse *resp0=new AliITSresponseSPD();
- SetResponseModel(kSPD,resp0);
- AliITSsegmentationSPD *seg0=new AliITSsegmentationSPD(fITSgeom);
- seg0->SetDetSize(s0->GetDx()*2.*kconv, // base this on AliITSgeomSPD
- s0->GetDz()*2.*kconv, // for now.
- s0->GetDy()*2.*kconv); // x,z,y full width in microns.
- seg0->SetNPads(256,160);// Number of Bins in x and z
- for(i=000;i<256;i++) bx[i] = 50.0; // in x all are 50 microns.
- for(i=000;i<160;i++) bz[i] = 425.0; // most are 425 microns except below
- for(i=160;i<280;i++) bz[i] = 0.0; // Outside of detector.
- bz[ 31] = bz[ 32] = 625.0; // first chip boundry
- bz[ 63] = bz[ 64] = 625.0; // first chip boundry
- bz[ 95] = bz[ 96] = 625.0; // first chip boundry
- bz[127] = bz[128] = 625.0; // first chip boundry
- bz[160] = 425.0; // Set so that there is no zero pixel size for fNz.
- seg0->SetBinSize(bx,bz); // Based on AliITSgeomSPD for now.
- SetSegmentationModel(kSPD,seg0);
- // set digit and raw cluster classes to be used
- const char *kData0=(iDetType->GetResponseModel())->DataType();
- if (strstr(kData0,"real")) iDetType->ClassNames("AliITSdigit",
- "AliITSRawClusterSPD");
- else iDetType->ClassNames("AliITSdigitSPD","AliITSRawClusterSPD");
- };
-
- //================================================ SDD
- iDetType=DetType(kSDD);
- s1 = (AliITSgeomSDD*) fITSgeom->GetShape(kSDD);// Get shape info. Do it this way for now.
- if (s1) {
- AliITSresponseSDD *resp1=new AliITSresponseSDD("simulated");
- SetResponseModel(kSDD,resp1);
- AliITSsegmentationSDD *seg1=new AliITSsegmentationSDD(fITSgeom,resp1);
- seg1->SetDetSize(s1->GetDx()*kconv, // base this on AliITSgeomSDD
- s1->GetDz()*2.*kconv, // for now.
- s1->GetDy()*2.*kconv); // x,z,y full width in microns.
- seg1->SetNPads(256,256);// Use AliITSgeomSDD for now
- SetSegmentationModel(kSDD,seg1);
- const char *kData1=(iDetType->GetResponseModel())->DataType();
- const char *kopt=iDetType->GetResponseModel()->ZeroSuppOption();
- if((!strstr(kopt,"2D")) && (!strstr(kopt,"1D")) || strstr(kData1,"real") ){
- iDetType->ClassNames("AliITSdigit","AliITSRawClusterSDD");
- } else iDetType->ClassNames("AliITSdigitSDD","AliITSRawClusterSDD");
- };
-
- //================================================ SSD Layer 5
- iDetType=DetType(kSSD);
- s2 = (AliITSgeomSSD*) fITSgeom->GetShape(kSSD);// Get shape info. Do it this way for now.
- if (s2) {
- AliITSresponse *resp2=new AliITSresponseSSD("simulated");
- SetResponseModel(kSSD,resp2);
- AliITSsegmentationSSD *seg2=new AliITSsegmentationSSD(fITSgeom);
- seg2->SetDetSize(s2->GetDx()*2.*kconv, // base this on AliITSgeomSSD
- s2->GetDz()*2.*kconv, // for now.
- s2->GetDy()*2.*kconv); // x,z,y full width in microns.
- seg2->SetPadSize(95.,0.); // strip x pitch in microns
- seg2->SetNPads(768,0); // number of strips on each side.
- seg2->SetAngles(0.0075,0.0275); // strip angels rad P and N side.
- seg2->SetAnglesLay5(0.0075,0.0275); // strip angels rad P and N side.
- seg2->SetAnglesLay6(0.0275,0.0075); // strip angels rad P and N side.
- SetSegmentationModel(kSSD,seg2);
- const char *kData2=(iDetType->GetResponseModel())->DataType();
- if(strstr(kData2,"real") ) iDetType->ClassNames("AliITSdigit",
- "AliITSRawClusterSSD");
- else iDetType->ClassNames("AliITSdigitSSD","AliITSRawClusterSSD");
- };
-
- if(kNTYPES>3){
- Warning("SetDefaults",
- "Only the four basic detector types are initialised!");
- }// end if
- return;
-};
-
-
-
-
-//______________________________________________________________________
-void AliITSv11::DrawModule() const{
+void AliITSv11::SetDefaults()
+{
+ // sets the default segmentation, response, digit and raw cluster classes
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return:
+ // none.
+
+ if(!fDetTypeSim){
+ Warning("SetDefaults","Error fDetTypeSim not defined");
+ return;
+ }
+
+ fDetTypeSim->SetDefaults();
+
+ if(fgkNTYPES>3){
+ Warning("SetDefaults",
+ "Only the four basic detector types are initialised!");
+ }// end if
+ return;
}
//______________________________________________________________________
-void AliITSv11::StepManager(){
- //
- // Called for every step in the ITS, then calles the AliITShit class
- // creator with the information to be recoreded about that hit.
- //
+void AliITSv11::StepManager()
+{
+ // Called for every step in the ITS, then calles the AliITShit class
+ // creator with the information to be recoreded about that hit.
+ // The value of the macro ALIITSPRINTGEOM if set to 1 will allow the
+ // printing of information to a file which can be used to create a .det
+ // file read in by the routine CreateGeometry(). If set to 0 or any other
+ // value except 1, the default behavior, then no such file is created nor
+ // it the extra variables and the like used in the printing allocated.
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return:
+ // none.
+
+ if(!(this->IsActive())) return;
+ if(!(gMC->TrackCharge())) return;
+
+ Int_t copy, lay = 0;
+ Int_t id = gMC->CurrentVolID(copy);
+
+ Bool_t notSens = kFALSE;
+ while ((lay<fIdN) && (notSens = id != fIdSens[lay])) ++lay;
+ if (notSens) return;
+
+ if(gMC->IsTrackExiting()) {
+ AddTrackReference(gAlice->GetMCApp()->GetCurrentTrackNumber(), AliTrackReference::kITS);
+ } // if Outer ITS mother Volume
+
+ static TLorentzVector position, momentum; // Saves on calls to construtors
+ static AliITShit hit;// Saves on calls to constructors
+
+ TClonesArray &lhits = *(Hits());
+ Int_t cpn0, cpn1, mod, status = 0;
+ //
+ // Track status
+ if(gMC->IsTrackInside()) status += 1;
+ if(gMC->IsTrackEntering()) status += 2;
+ if(gMC->IsTrackExiting()) status += 4;
+ if(gMC->IsTrackOut()) status += 8;
+ if(gMC->IsTrackDisappeared()) status += 16;
+ if(gMC->IsTrackStop()) status += 32;
+ if(gMC->IsTrackAlive()) status += 64;
+
+ //
+ // retrieve the indices with the volume path
+ //
+ switch (lay) {
+ case 0:case 1: // SPD
+ gMC->CurrentVolOffID(1,copy); // ladder
+ gMC->CurrentVolOffID(3,cpn1); // stave
+ gMC->CurrentVolOffID(5,cpn0); // sector
+ break;
+ case 2:case 3: // SDD
+ copy = 1;
+ gMC->CurrentVolOffID(2,cpn1);
+ gMC->CurrentVolOffID(3,cpn0);
+ break;
+ case 4:case 5: // SSD
+ copy = 1;
+ gMC->CurrentVolOffID(1,cpn1);
+ gMC->CurrentVolOffID(2,cpn0);
+ break;
+ default:
+ AliError(Form("Invalid value: lay= %d . Not an ITS sensitive volume",lay));
+ return; // not an ITS sensitive volume.
+ } //
+
+ fInitGeom.DecodeDetector(mod,lay+1,cpn0,cpn1,copy);
+ // We should not need to pass by the switch !
+ // This is time consuming...
+ // therefore DecodeDetectorv11(...) shouldn't be private !
+ // and we should be able to use instead :
+ //fInitGeom.DecodeDetectorv11(mod,lay+1,cpn0,cpn1,copy);
+
+ //
+ // Fill hit structure.
+ //
+ hit.SetModule(mod);
+ hit.SetTrack(gAlice->GetMCApp()->GetCurrentTrackNumber());
+ gMC->TrackPosition(position);
+ gMC->TrackMomentum(momentum);
+ hit.SetPosition(position);
+ hit.SetTime(gMC->TrackTime());
+ hit.SetMomentum(momentum);
+ hit.SetStatus(status);
+ hit.SetEdep(gMC->Edep());
+ hit.SetShunt(GetIshunt());
+ if(gMC->IsTrackEntering()){
+ hit.SetStartPosition(position);
+ hit.SetStartTime(gMC->TrackTime());
+ hit.SetStartStatus(status);
+ return; // don't save entering hit.
+ } // end if IsEntering
+ // Fill hit structure with this new hit.
+ //Info("StepManager","Calling Copy Constructor");
+ new(lhits[fNhits++]) AliITShit(hit); // Use Copy Construtor.
+ // Save old position... for next hit.
+ hit.SetStartPosition(position);
+ hit.SetStartTime(gMC->TrackTime());
+ hit.SetStartStatus(status);
- Int_t copy, id;
- TLorentzVector position, momentum;
- static TLorentzVector position0;
- static Int_t stat0=0;
-
- if(!(this->IsActive())){
return;
- } // end if !Active volume.
-
- if(!(gMC->TrackCharge())) return;
-
- id=gMC->CurrentVolID(copy);
-
- Bool_t sensvol = kFALSE;
- for(Int_t kk = 0; kk < fIdN; kk++)
- if(id == fIdSens[kk]) sensvol = kTRUE;
-
- if (sensvol && (gMC->IsTrackExiting())) {
- copy = fTrackReferences->GetEntriesFast();
- TClonesArray &lTR = *fTrackReferences;
- // Fill TrackReference structure with this new TrackReference.
- new(lTR[copy]) AliTrackReference(gAlice->GetMCApp()->GetCurrentTrackNumber());
- } // if Outer ITS mother Volume
-
- Int_t vol[5];
- TClonesArray &lhits = *fHits;
- //
- // Track status
- vol[3] = 0;
- vol[4] = 0;
- // Fill hit structure.
- if(gMC->IsTrackInside()) vol[3] += 1;
- if(gMC->IsTrackEntering()) vol[3] += 2;
- if(gMC->IsTrackExiting()) vol[3] += 4;
- if(gMC->IsTrackOut()) vol[3] += 8;
- if(gMC->IsTrackDisappeared()) vol[3] += 16;
- if(gMC->IsTrackStop()) vol[3] += 32;
- if(gMC->IsTrackAlive()) vol[3] += 64;
-
- // Only entering charged tracks
- if(!(gMC->TrackCharge())) return;
-
- if((id = gMC->CurrentVolID(copy)) == fIdSens[0]) {
- fSDDgeom->GetCurrentLayLaddDet(vol[0], vol[2], vol[1]);
- // vol[2], vol[1]) : in this order because the ladder
- // index and the det. index are exchanged in the constructor
- // of AliITShit ... ???
-
- } else {
- return; // not an ITS volume?
- };
-
- gMC->TrackPosition(position);
- gMC->TrackMomentum(momentum);
- vol[4] = stat0;
- if(gMC->IsTrackEntering()){
- position0 = position;
- stat0 = vol[3];
- return;
- } // end if IsEntering
- // Fill hit structure with this new hit.
- new(lhits[fNhits++]) AliITShit(fIshunt,gAlice->GetMCApp()->GetCurrentTrackNumber(),
- vol, gMC->Edep(),gMC->TrackTime(),position,
- position0,momentum);
- //
- position0 = position;
- stat0 = vol[3];
-
- return;
-};
+}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff