-/**************************************************************************
+ /**************************************************************************
* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
* *
* Author: The ALICE Off-line Project. *
* provided "as is" without express or implied warranty. *
**************************************************************************/
-/*
-$Log$
-Revision 1.8 2000/10/27 13:03:08 barbera
-Small changes in the SPD volumes and materials
-
-Revision 1.6 2000/10/16 14:45:37 barbera
-Mother volume ITSD modified to avoid some overlaps
-
-Revision 1.5 2000/10/16 13:49:15 barbera
-Services volumes slightly modified and material added following Pierluigi Barberis' information
-
-Revision 1.4 2000/10/07 15:33:07 barbera
-Small corrections to the ITSV mother volume
-
-Revision 1.3 2000/10/07 13:06:50 barbera
-Some new materials and media defined
-
-Revision 1.2 2000/10/07 10:58:15 barbera
-Mother volume ITSV corrected
-
-Revision 1.1 2000/10/06 23:09:24 barbera
-New coarse geometry (asymmetric services
-
-Revision 1.20 2000/10/02 21:28:08 fca
-Removal of useless dependecies via forward declarations
-
-Revision 1.19 2000/07/10 16:07:19 fca
-Release version of ITS code
-
-Revision 1.14.2.2 2000/05/19 10:09:21 nilsen
-fix for bug with HP and Sun unix + fix for event display in ITS-working branch
-
-Revision 1.14.2.1 2000/03/04 23:45:19 nilsen
-Fixed up the comments/documentation.
-
-Revision 1.14 1999/11/25 06:52:56 fca
-Correct value of drca
-
-Revision 1.13.2.1 1999/11/25 06:52:21 fca
-Correct value of drca
-
-Revision 1.13 1999/10/27 11:16:26 fca
-Correction of problem in geometry
-
-Revision 1.12 1999/10/22 08:25:25 fca
-remove double definition of destructors
-
-Revision 1.11 1999/10/22 08:16:49 fca
-Correct destructors, thanks to I.Hrivnacova
-
-Revision 1.10 1999/10/06 19:56:50 fca
-Add destructor
-
-Revision 1.9 1999/10/05 08:05:09 fca
-Minor corrections for uninitialised variables.
-
-Revision 1.8 1999/09/29 09:24:20 fca
-Introduction of the Copyright and cvs Log
-
-*/
+/* $Id$ */
///////////////////////////////////////////////////////////////////////////////
// //
// strongly encouraged to uses AliITSv5.
// //
///////////////////////////////////////////////////////////////////////////////
-
+#include <Riostream.h>
+#include <TGeoGlobalMagField.h>
+#include <TGeoManager.h>
#include <TMath.h>
+#include <TObjArray.h>
#include <TRandom.h>
#include <TVector.h>
-#include <TGeometry.h>
-#include <TNode.h>
-#include <TTUBE.h>
-#include <TFile.h> // only required for Tracking function?
-#include <TCanvas.h>
-#include <TObjArray.h>
-#include <TClonesArray.h>
+#include <TVirtualMC.h>
-
-#include "AliMC.h"
#include "AliMagF.h"
#include "AliConst.h"
-
#include "AliITShit.h"
#include "AliITSvPPRcoarseasymm.h"
+#include "AliMagF.h"
#include "AliRun.h"
-
ClassImp(AliITSvPPRcoarseasymm)
//_____________________________________________________________________________
-AliITSvPPRcoarseasymm::AliITSvPPRcoarseasymm() {
+AliITSvPPRcoarseasymm::AliITSvPPRcoarseasymm():
+AliITS(),
+fMajorVersion(IsVersion()),
+fMinorVersion(0),
+fRails(0),
+fSuppMat(0),
+fIgm(kvPPRcourseasymm) {
////////////////////////////////////////////////////////////////////////
// Standard default constructor for the ITS version 6.
////////////////////////////////////////////////////////////////////////
- fIdN = 6;
- fIdName = new TString[fIdN];
- fIdName[0] = "ITS1";
- fIdName[1] = "ITS2";
- fIdName[2] = "ITS3";
- fIdName[3] = "ITS4";
- fIdName[4] = "ITS5";
- fIdName[5] = "ITS6";
- fIdSens = new Int_t[fIdN];
- for (Int_t i=0;i<fIdN;i++) fIdSens[i]=fIdName[i].Length();
+ fIdN = 0;
+ fIdName = 0;
+ fIdSens = 0;
}
//_____________________________________________________________________________
-AliITSvPPRcoarseasymm::AliITSvPPRcoarseasymm(const char *name, const char *title) : AliITS(name, title){
+AliITSvPPRcoarseasymm::AliITSvPPRcoarseasymm(const char *name, const char *title) :
+AliITS(name, title),
+fMajorVersion(IsVersion()),
+fMinorVersion(0),
+fRails(0),
+fSuppMat(0),
+fIgm(kvPPRcourseasymm) {
////////////////////////////////////////////////////////////////////////
// Standard constructor for the ITS version 6.
////////////////////////////////////////////////////////////////////////
- fIdN = 6;
- fIdName = new TString[fIdN];
- fIdName[0] = "ITS1";
- fIdName[1] = "ITS2";
- fIdName[2] = "ITS3";
- fIdName[3] = "ITS4";
- fIdName[4] = "ITS5";
- fIdName[5] = "ITS6";
- fIdSens = new Int_t[fIdN];
- for (Int_t i=0;i<fIdN;i++) fIdSens[i]=fIdName[i].Length();
-
-}
-//____________________________________________________________________________
-AliITSvPPRcoarseasymm::AliITSvPPRcoarseasymm(const AliITSvPPRcoarseasymm &source){
-////////////////////////////////////////////////////////////////////////
-// Copy Constructor for ITS version 6.
-////////////////////////////////////////////////////////////////////////
- if(&source == this) return;
- printf("Not allowed to copy AliITSvPPRcoarseasymm\n");
- return;
-}
-//_____________________________________________________________________________
-AliITSvPPRcoarseasymm& AliITSvPPRcoarseasymm::operator=(const AliITSvPPRcoarseasymm &source){
-////////////////////////////////////////////////////////////////////////
-// Assignment operator for the ITS version 6.
-////////////////////////////////////////////////////////////////////////
- if(&source == this) return *this;
- printf("Not allowed to copy AliITSvPPRcoarseasymm\n");
- return *this;
+ fIdN = 6;
+ fIdName = new TString[fIdN];
+ fIdName[0] = "ITS1";
+ fIdName[1] = "ITS2";
+ fIdName[2] = "ITS3";
+ fIdName[3] = "ITS4";
+ fIdName[4] = "ITS5";
+ fIdName[5] = "ITS6";
+ fIdSens = new Int_t[fIdN];
+ for (Int_t i=0;i<fIdN;i++) fIdSens[i]=0;
}
//_____________________________________________________________________________
AliITSvPPRcoarseasymm::~AliITSvPPRcoarseasymm() {
////////////////////////////////////////////////////////////////////////
}
-//__________________________________________________________________________
-void AliITSvPPRcoarseasymm::BuildGeometry(){
-////////////////////////////////////////////////////////////////////////
-// Geometry builder for the ITS version 6.
-////////////////////////////////////////////////////////////////////////
- TNode *node, *top;
- const int kColorITS=kYellow;
- //
- top = gAlice->GetGeometry()->GetNode("alice");
-
- new TTUBE("S_layer1","Layer1 of ITS","void",3.95,3.95+0.05475,12.25);
- top->cd();
- node = new TNode("Layer1","Layer1","S_layer1",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer2","Layer2 of ITS","void",7.,7.+0.05475,16.3);
- top->cd();
- node = new TNode("Layer2","Layer2","S_layer2",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer3","Layer3 of ITS","void",15.,15.+0.05288,21.1);
- top->cd();
- node = new TNode("Layer3","Layer3","S_layer3",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer4","Layer4 of ITS","void",24,24+0.05288,29.6);
- top->cd();
- node = new TNode("Layer4","Layer4","S_layer4",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer5","Layer5 of ITS","void",40,40+0.05382,45.1);
- top->cd();
- node = new TNode("Layer5","Layer5","S_layer5",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer6","Layer6 of ITS","void",45,45+0.05382,50.4);
- top->cd();
- node = new TNode("Layer6","Layer6","S_layer6",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-}
//_____________________________________________________________________________
void AliITSvPPRcoarseasymm::CreateGeometry(){
-////////////////////////////////////////////////////////////////////////
-// This routine defines and Creates the geometry for version 6 of the ITS.
-////////////////////////////////////////////////////////////////////////
-
- //INNER RADII OF THE SILICON LAYERS
- Float_t rl[6] = { 3.8095,7.,15.,24.,38.1,43.5765 };
- //THICKNESSES OF LAYERS (in % radiation length)
- Float_t drl[6] = { 1.03,1.03,0.94,0.95,0.91,0.87 };
- //HALF LENGTHS OF LAYERS
- Float_t dzl[6] = { 14.35,14.35,25.1,32.1,49.405,55.27 };
- //LENGTHS OF END-LADDER BOXES (ALL INCLUDED)
- Float_t dzb[6] = { 12.4,12.4,19.,19.,12.,11. };
- //THICKNESSES OF END-LADDER BOXES (ALL INCLUDED)
- Float_t drb[6] = { rl[1]-rl[0],0.2,5.,5.,3.,3. };
+ ////////////////////////////////////////////////////////////////////////
+ // This routine defines and Creates the geometry for version 6 of the ITS.
+ ////////////////////////////////////////////////////////////////////////
+
+ //INNER RADII OF THE SILICON LAYERS
+ Float_t rl[6] = { 3.8095,7.,15.,24.,38.5,43.5765 };
+ //THICKNESSES OF LAYERS (in % radiation length)
+ Float_t drl[6] = { 1.03,1.03,0.94,0.95,0.91,0.87 };
+ //HALF LENGTHS OF LAYERS
+ Float_t dzl[6] = { 14.35,14.35,25.1,32.1,49.405,55.27 };
+ //LENGTHS OF END-LADDER BOXES (ALL INCLUDED)
+ Float_t dzb[6] = { 12.4,12.4,13.5,15.,7.5,7.5 };
+ //THICKNESSES OF END-LADDER BOXES (ALL INCLUDED)
+ Float_t drb[6] = { rl[1]-rl[0],0.2,5.,5.,4.,4. };
- Float_t dits[3], rlim, zmax;
- Float_t zpos;
- Float_t pcits[15], xltpc;
- Int_t idrotm[399], i;
- Float_t dgh[50];
-
- Int_t *idtmed = fIdtmed->GetArray()-199;
+ Float_t dits[3], rlim, zmax;
+ Float_t zpos;
+ Float_t pcits[100], ztpc;
+ Int_t idrotm[1999], i;
+ Float_t dgh[100];
+
+ Int_t rails = 1; // flag for rails (1 --> rails in; 0 --> rails out)
+ Int_t suppmat = 0; // flag to change the material of the services
+ // supports (=0 copper, =1 aluminum, =2 carbon)
+ // These constant character strings are set by cvs during commit
+ // do not change them unless you know what you are doing!
+ const Char_t *cvsDate="$Date$";
+ const Char_t *cvsRevision="$Revision$";
+ rails = GetRails();
+
+ if(rails != 0 && rails != 1) {
+ cout << "ITS - WARNING: the switch for rails is not set "
+ "neither to 0 (rails out) nor to 1 (rails in)."
+ " The default value of 1 (rails in) will be used." << endl;
+ } // end if
+
+ if (rails == 0 ) {
+ cout << "ITS: Rails are out." << endl;
+ } else {
+ cout << "ITS: Rails are in." << endl;
+ } // end if
+ suppmat = GetSupportMaterial();
+
+ if (suppmat != 0 && suppmat != 1 && suppmat != 2) {
+ cout << "ITS - WARNING: the flag for the material of "
+ "services supports is not set neither to 0 (copper) "
+ "nor to 1 (aluminum) nor to 2 (carbon)."
+ " The default value of 0 (copper) will be used." << endl;
+ } // end if
+
+ if (suppmat == 0) {
+ cout << "ITS: The material of the services supports is copper."
+ << endl;
+ } else if (suppmat == 1){
+ cout << "ITS: The material of the services supports is aluminum."
+ << endl;
+ } else {
+ cout << "ITS: The material of the services supports is carbon."
+ << endl;
+ } // end if
+
+
+ Int_t *idtmed = fIdtmed->GetArray()-199;
- // CONVERT INTO CM (RL(SI)=9.36 CM)
- for (i = 0; i < 6; ++i) {
- drl[i] = drl[i] / 100. * 9.36;
- }
+ // CONVERT INTO CM (RL(SI)=9.36 CM)
+ for (i = 0; i < 6; ++i) {
+ drl[i] = drl[i] / 100. * 9.36;
+ } // end if
- // FIELD CAGE HALF LENGTH
-
- rlim = 56.;
- zmax = 76.708;
- xltpc = 284.;
-
- // --- Define ghost volume containing the whole ITS (including services)
- // and fill it with air
-
- dgh[0] = 0.;
- dgh[1] = 360.;
- dgh[2] = 12.;
- dgh[3] = -xltpc-5.-0.1;
- dgh[4] = 44.9;
- dgh[5] = 85.;
- dgh[6] = -xltpc;
- dgh[7] = 44.9;
- dgh[8] = 85.;
- dgh[9] = -xltpc;
- dgh[10] = 44.9;
- dgh[11] = 56.1;
- dgh[12] = -100.7;
- dgh[13] = 44.9;
- dgh[14] = 56.1;
- dgh[15] = -77.2;
- dgh[16] = 44.9;
- dgh[17] = 56.1;
- dgh[18] = -40.;
- dgh[19] = 3.29;
- dgh[20] = 56.1;
- dgh[21] = 40.;
- dgh[22] = 3.29;
- dgh[23] = 56.1;
- dgh[24] = 77.2;
- dgh[25] = 44.9;
- dgh[26] = 56.1;
- dgh[27] = 100.7;
- dgh[28] = 44.9;
- dgh[29] = 56.1;
- dgh[30] = xltpc;
- dgh[31] = 61.5;
- dgh[32] = 61.5+4.;
- dgh[33] = xltpc;
- dgh[34] = 61.5;
- dgh[35] = 85.;
- dgh[36] = xltpc+4.+0.1;
- dgh[37] = 62.4;
- dgh[38] = 85.;
-
- gMC->Gsvolu("ITSV", "PCON", idtmed[275], dgh, 39);
-
- // --- Place the ghost volume in its mother volume (ALIC) and make it
- // invisible
-
- gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "ONLY");
- gMC->Gsatt("ITSV", "SEEN", 0);
+ // FIELD CAGE HALF LENGTH
+
+ rlim = 50.;
+ zmax = 74.;
+ ztpc = 284.;
+
+ // --- Define ghost volume containing the whole ITS (including services)
+ // and fill it with air
+ /*
+ dgh[0] = 0.;
+ dgh[1] = 360.;
+ dgh[2] = 16.;
+ dgh[3] = -ztpc-5.-0.1;
+ dgh[4] = 46;
+ dgh[5] = 85.;
+ dgh[6] = -ztpc;
+ dgh[7] = 46;
+ dgh[8] = 85.;
+ dgh[9] = -ztpc;
+ dgh[10] = 46;
+ dgh[11] = rlim+6;
+ dgh[12] = -97.5;
+ dgh[13] = 46;
+ dgh[14] = rlim+6;
+ dgh[15] = -zmax;
+ dgh[16] = 46;
+ dgh[17] = rlim+6;
+ dgh[18] = -48;
+ dgh[19] = 6;
+ dgh[20] = rlim+6;
+ dgh[21] = -28.6;
+ dgh[22] = 6;
+ dgh[23] = rlim+6;
+ dgh[24] = -27.6;
+ dgh[25] = 3.295;
+ dgh[26] = rlim+6;
+ dgh[27] = 27.6;
+ dgh[28] = 3.295;
+ dgh[29] = rlim+6;
+ dgh[30] = 28.6;
+ dgh[31] = 6;
+ dgh[32] = rlim+6;
+ dgh[33] = 48;
+ dgh[34] = 6;
+ dgh[35] = rlim+6;
+ dgh[36] = zmax;
+ dgh[37] = 46;
+ dgh[38] = rlim+6;
+ dgh[39] = 97.5;
+ dgh[40] = 46;
+ dgh[41] = rlim+6;
+ dgh[42] = ztpc;
+ dgh[43] = 62;
+ dgh[44] = 62+4.;
+ dgh[45] = ztpc;
+ dgh[46] = 62;
+ dgh[47] = 85.;
+ dgh[48] = ztpc+4.+0.1;
+ dgh[49] = 62.4;
+ dgh[50] = 85.;
+ gMC->Gsvolu("ITSV", "PCON", idtmed[275], dgh, 51);
+
+ // --- Place the ghost volume in its mother volume (ALIC) and make it
+ // invisible
+
+ gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "ONLY");
+ //gMC->Gsatt("ITSV", "SEEN", 0);
+ */
+ TGeoVolumeAssembly *itsV = gGeoManager->MakeVolumeAssembly("ITSV");
+ const Int_t length=100;
+ Char_t vstrng[length];
+ if(fIgm.WriteVersionString(vstrng,length,(AliITSVersion_t)IsVersion(),
+ fMinorVersion,cvsDate,cvsRevision))
+ itsV->SetTitle(vstrng);
+ TGeoVolume *alic = gGeoManager->GetVolume("ALIC");
+ if(alic==0) {
+ Error("CreateGeometry","alic=0");
+ return;
+ } // end if
+ // See idrotm[199] for angle definitions.
+ //alic->AddNode(itsV,1,new TGeoRotation("", 90.,180., 90.,90., 180.,0.));
+ alic->AddNode(itsV,1,0);
- // --- Define ghost volume containing the six layers and fill it with air
+ // --- Define ghost volume containing the six layers and fill it with air
dgh[0] = 0.;
dgh[1] = 360.;
- dgh[2] = 4.;
- dgh[3] = -77.2;
- dgh[4] = 45.;
- dgh[5] = 56.;
- dgh[6] = -40.;
- dgh[7] = 3.3;
- dgh[8] = 56.;
- dgh[9] = 40.;
- dgh[10] = 3.3;
- dgh[11] = 56.;
- dgh[12] = 77.2;
- dgh[13] = 45.;
- dgh[14] = 56.;
- gMC->Gsvolu("ITSD", "PCON", idtmed[275], dgh, 15);
+ dgh[2] = 8.;
+ dgh[3] = -zmax;
+ dgh[4] = 46.;
+ dgh[5] = rlim;
+ dgh[6] = -47.5;
+ dgh[7] = 6.005;
+ dgh[8] = rlim;
+ dgh[9] = -28.5;
+ dgh[10] = 6.005;
+ dgh[11] = rlim;
+ dgh[12] = -27.5;
+ dgh[13] = 3.3;
+ dgh[14] = rlim;
+ dgh[15] = 27.5;
+ dgh[16] = 3.3;
+ dgh[17] = rlim;
+ dgh[18] = 28.5;
+ dgh[19] = 6.005;
+ dgh[20] = rlim;
+ dgh[21] = 47.5;
+ dgh[22] = 6.005;
+ dgh[23] = rlim;
+ dgh[24] = zmax;
+ dgh[25] = 46.;
+ dgh[26] = rlim;
+ gMC->Gsvolu("ITSD", "PCON", idtmed[275], dgh, 27);
// --- Place the ghost volume in its mother volume (ITSV) and make it
// invisible
gMC->Gspos("ITSD", 1, "ITSV", 0., 0., 0., 0, "ONLY");
//gMC->Gsatt("ITSD", "SEEN", 0);
+
// ITS LAYERS (SILICON)
dits[0] = rl[0];
// END-LADDER ELECTRONICS BOXES AND CABLES FOR SDD
gMC->Gsvolu("IEL2", "TUBE", idtmed[237], dits, 0);
- for (i = 2; i < 4; i++) {
- dits[0] = rl[i];
+ for (i = 2; i < 3; i++) {
+ dits[0] = rl[i]-2.5;
+ dits[1] = dits[0] + drb[i];
+ dits[2] = dzb[i] / 2.;
+ zpos = dzl[i] + dits[2];
+ gMC->Gsposp("IEL2", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3);
+ gMC->Gsposp("IEL2", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3);
+ }
+ for (i = 3; i < 4; i++) {
+ dits[0] = rl[i]-1.4;
dits[1] = dits[0] + drb[i];
dits[2] = dzb[i] / 2.;
zpos = dzl[i] + dits[2];
// END-LADDER ELECTRONICS BOXES AND CABLES FOR SSD
gMC->Gsvolu("IEL3", "TUBE", idtmed[263], dits, 0);
- for (i = 4; i < 6; i++) {
- dits[0] = rl[i];
+ for (i = 4; i < 5; i++) {
+ dits[0] = rl[i]+1.4;
dits[1] = dits[0] + drb[i];
dits[2] = dzb[i] / 2.;
zpos = dzl[i] + dits[2];
gMC->Gsposp("IEL3", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3);
gMC->Gsposp("IEL3", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3);
}
-
+ for (i = 5; i < 6; i++) {
+ dits[0] = rl[i]+0.4235;
+ dits[1] = dits[0] + drb[i];
+ dits[2] = dzb[i] / 2.;
+ zpos = dzl[i] + dits[2];
+ gMC->Gsposp("IEL3", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3);
+ gMC->Gsposp("IEL3", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3);
+ }
// DEFINE THERMAL SCREEN FOR SPD
// DEFINE END CONES FOR SDD
- pcits[0] = 0.;
- pcits[1] = 360.;
- pcits[2] = 2.;
- pcits[3] = 42.5;
- pcits[4] = 8.5;
- pcits[5] = 8.5+3.0;
- pcits[6] = 59.;
- pcits[7] = 28.;
- pcits[8] = 28.+3.0;
- gMC->Gsvolu("ICO1", "PCON", idtmed[274], pcits, 9);
+ pcits[0] = (59.-42.5)/2.;
+ pcits[1] = 8.5;
+ pcits[2] = 8.5+0.1;
+ pcits[3] = 28.;
+ pcits[4] = 28.+0.1;
+ gMC->Gsvolu("ICO1", "CONE", idtmed[238], pcits, 5);
AliMatrix(idrotm[200], 90., 0., 90., 90., 180., 0.);
- gMC->Gspos("ICO1", 1, "ITSD", 0., 0., 0., 0, "ONLY");
- gMC->Gspos("ICO1", 2, "ITSD", 0., 0., 0., idrotm[200], "ONLY");
+ gMC->Gspos("ICO1", 1, "ITSD", 0., 0., 42.5+pcits[0], 0, "ONLY");
+ gMC->Gspos("ICO1", 2, "ITSD", 0., 0., -(42.5+pcits[0]), idrotm[200], "ONLY");
// DEFINE CYLINDER BETWEEN SDD AND SSD
// DEFINE END CONES FOR SSD
- pcits[0] = 0.;
- pcits[1] = 360.;
- pcits[2] = 2.;
- pcits[3] = 59.;
- pcits[4] = 28.0;
- pcits[5] = 28.0+4.0;
- pcits[6] = 74.0;
- pcits[7] = 47.;
- pcits[8] = 47.+4.0;
- gMC->Gsvolu("ICO2", "PCON", idtmed[274], pcits, 9);
- gMC->Gspos("ICO2", 1, "ITSD", 0., 0., 0., 0, "ONLY");
- gMC->Gspos("ICO2", 2, "ITSD", 0., 0., 0., idrotm[200], "ONLY");
+ pcits[0] = (74.-59.)/2.;
+ pcits[1] = 28.;
+ pcits[2] = 28.+0.1;
+ pcits[3] = 47.;
+ pcits[4] = 47.+0.1;
+ gMC->Gsvolu("ICO2", "CONE", idtmed[264], pcits, 5);
+ gMC->Gspos("ICO2", 1, "ITSD", 0., 0., 59.+pcits[0], 0, "ONLY");
+ gMC->Gspos("ICO2", 2, "ITSD", 0., 0., -(59.+pcits[0]), idrotm[200], "ONLY");
+
+
+ // **************************** SERVICES *********************************
- // SERVICES
-
// --- DEFINE CABLES AT THE END OF THE ITS CONES - COPPER PART
+ // UPPER PART
- dgh[0] = 45.;
- dgh[1] = 45.+1.0;
+ dgh[0] = 46.;
+ dgh[1] = 46.+1.0;
dgh[2] = 9.5;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+
+ if (suppmat == 0) {
+ gMC->Gsvolu("I1CU", "TUBS", idtmed[279], dgh, 5); // copper
+ } else if (suppmat == 1) {
+ gMC->Gsvolu("I1CU", "TUBS", idtmed[285], dgh, 5); // aluminum
+ } else {
+ gMC->Gsvolu("I1CU", "TUBS", idtmed[274], dgh, 5); // carbon
+ }
+ gMC->Gspos("I1CU", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
+ gMC->Gspos("I1CU", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
- gMC->Gsvolu("ICCU", "TUBE", idtmed[279], dgh, 3);
- gMC->Gspos("ICCU", 1, "ITSV", 0., 0., 86.7, 0, "ONLY");
- gMC->Gspos("ICCU", 2, "ITSV", 0., 0., -86.7, idrotm[200], "ONLY");
+ // --- DEFINE CABLES AT THE END OF THE ITS CONES - COPPER PART
+ // LOWER PART
+ dgh[0] = 46.;
+ dgh[1] = 46.+1.0;
+ dgh[2] = 9.5;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+
+ if (suppmat == 0) {
+ gMC->Gsvolu("I2CU", "TUBS", idtmed[279], dgh, 5); // copper
+ } else if (suppmat == 1) {
+ gMC->Gsvolu("I2CU", "TUBS", idtmed[285], dgh, 5); // aluminum
+ } else {
+ gMC->Gsvolu("I2CU", "TUBS", idtmed[274], dgh, 5); // carbon
+ }
+ gMC->Gspos("I2CU", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
+ gMC->Gspos("I2CU", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
+
+
// --- DEFINE CABLES AT THE END OF THE ITS CONES - CARBON PART
+ // UPPER PART
- dgh[0] = 45.+1.0;
- dgh[1] = 45.+1.0+1.5;
+ dgh[0] = 46.+1.0;
+ dgh[1] = 46.+1.0+1.5;
dgh[2] = 9.5;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
- gMC->Gsvolu("ICCC", "TUBE", idtmed[274], dgh, 3);
- gMC->Gspos("ICCC", 1, "ITSV", 0., 0., 86.7, 0, "ONLY");
- gMC->Gspos("ICCC", 2, "ITSV", 0., 0., -86.7, idrotm[200], "ONLY");
+ gMC->Gsvolu("I1CC", "TUBS", idtmed[274], dgh, 5);
+ gMC->Gspos("I1CC", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
+ gMC->Gspos("I1CC", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
- // --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES
+ // --- DEFINE CABLES AT THE END OF THE ITS CONES - CARBON PART
+ // LOWER PART
+
+ dgh[0] = 46.+1.0;
+ dgh[1] = 46.+1.0+1.5;
+ dgh[2] = 9.5;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
- dgh[0] = 45.;
+ gMC->Gsvolu("I2CC", "TUBS", idtmed[274], dgh, 5);
+ gMC->Gspos("I2CC", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
+ gMC->Gspos("I2CC", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
+
+ // --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES
+ // UPPER PART
+
+ dgh[0] = 46.;
dgh[1] = 56.;
dgh[2] = 2.25;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
- gMC->Gsvolu("IPAN", "TUBE", idtmed[285], dgh, 3);
- gMC->Gspos("IPAN", 1, "ITSV", 0., 0., 98.45, 0, "ONLY");
- gMC->Gspos("IPAN", 2, "ITSV", 0., 0., -98.45, idrotm[200], "ONLY");
+ gMC->Gsvolu("IPA1", "TUBS", idtmed[285], dgh, 5);
+ gMC->Gspos("IPA1", 1, "ITSV", 0., 0., 95.25, 0, "ONLY");
+ gMC->Gspos("IPA1", 2, "ITSV", 0., 0., -95.25, idrotm[200], "ONLY");
+
+
+ // --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES
+ // LOWER PART
+
+ dgh[0] = 46.;
+ dgh[1] = 56.;
+ dgh[2] = 2.25;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ gMC->Gsvolu("IPA2", "TUBS", idtmed[285], dgh, 5);
+ gMC->Gspos("IPA2", 1, "ITSV", 0., 0., 95.25, 0, "ONLY");
+ gMC->Gspos("IPA2", 2, "ITSV", 0., 0., -95.25, idrotm[200], "ONLY");
+
+
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - COPPER PART
+ // UPPER PART
+
+ dgh[0] = (ztpc-97.5)/2.;
+ dgh[1] = 46.2;
+ dgh[2] = 46.2+1.0;
+ dgh[3] = 62.3;
+ dgh[4] = 62.3+1.0;
+ dgh[5] = 12.;
+ dgh[6] = 168.;
+ if (suppmat == 0) {
+ gMC->Gsvolu("ICU1", "CONS", idtmed[279], dgh, 7); // copper
+ } else if (suppmat == 1) {
+ gMC->Gsvolu("ICU1", "CONS", idtmed[285], dgh, 7); // aluminum
+ } else {
+ gMC->Gsvolu("ICU1", "CONS", idtmed[274], dgh, 7); // carbon
+ }
+ gMC->Gspos("ICU1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
- dgh[0] = 0.;
- dgh[1] = 360.;
- dgh[2] = 2.;
- dgh[3] = 100.7;
- dgh[4] = 45.2;
- dgh[5] = 45.2+1.0;
- dgh[6] = xltpc;
- dgh[7] = 61.8;
- dgh[8] = 61.8+1.0;
- gMC->Gsvolu("ICU1", "PCON", idtmed[279], dgh, 9);
- gMC->Gspos("ICU1", 1, "ITSV", 0., 0., 0., 0, "ONLY");
+ // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - COPPER PART
+ // LOWER PART
+
+ dgh[0] = (ztpc-97.5)/2.;
+ dgh[1] = 46.2;
+ dgh[2] = 46.2+1.0;
+ dgh[3] = 62.3;
+ dgh[4] = 62.3+1.0;
+ dgh[5] = 192.;
+ dgh[6] = 348.;
+ if (suppmat == 0) {
+ gMC->Gsvolu("ICU2", "CONS", idtmed[279], dgh, 7); // copper
+ } else if (suppmat == 1) {
+ gMC->Gsvolu("ICU2", "CONS", idtmed[285], dgh, 7); // aluminum
+ } else {
+ gMC->Gsvolu("ICU2", "CONS", idtmed[274], dgh, 7); // carbon
+ }
+ gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+
+
+ // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - CARBON PART
+ // UPPER PART
+
+ dgh[0] = (ztpc-97.5)/2.;
+ dgh[1] = 46.2+1.0;
+ dgh[2] = 46.2+1.0+1.5;
+ dgh[3] = 62.3+1.0;
+ dgh[4] = 62.3+1.0+1.5;
+ dgh[5] = 12.;
+ dgh[6] = 168.;
+ gMC->Gsvolu("ICC1", "CONS", idtmed[274], dgh, 7);
+ gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - CARBON PART
-
- dgh[0] = 0.;
- dgh[1] = 360.;
- dgh[2] = 2.;
- dgh[3] = 100.7;
- dgh[4] = 45.2+1.0;
- dgh[5] = 45.2+1.0+1.5;
- dgh[6] = xltpc;
- dgh[7] = 61.8+1.0;
- dgh[8] = 61.8+1.0+1.5;
- gMC->Gsvolu("ICC1", "PCON", idtmed[274], dgh, 9);
- gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 0., 0, "ONLY");
-
-
+ // LOWER PART
+
+ dgh[0] = (ztpc-97.5)/2.;
+ dgh[1] = 46.2+1.0;
+ dgh[2] = 46.2+1.0+1.5;
+ dgh[3] = 62.3+1.0;
+ dgh[4] = 62.3+1.0+1.5;
+ dgh[5] = 192.;
+ dgh[6] = 348.;
+ gMC->Gsvolu("ICC2", "CONS", idtmed[274], dgh, 7);
+ gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART
-
- dgh[0] = 0.;
- dgh[1] = 360.;
- dgh[2] = 2.;
- dgh[3] = xltpc+1.5;
- dgh[4] = 62.5;
- dgh[5] = 74.5;
- dgh[6] = xltpc+1.5+1.0;
- dgh[7] = 62.5;
- dgh[8] = 74.5;
- gMC->Gsvolu("ICU2", "PCON", idtmed[279], dgh, 9);
- gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 0., 0, "ONLY");
-
+ // UPPER PART
+
+ dgh[0] = 62.1;
+ dgh[1] = 74.5;
+ dgh[2] = 0.5;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+ if (suppmat == 0) {
+ gMC->Gsvolu("ICU3", "TUBS", idtmed[279], dgh, 5); // copper
+ } else if (suppmat == 1) {
+ gMC->Gsvolu("ICU3", "TUBS", idtmed[285], dgh, 5); // aluminum
+ } else {
+ gMC->Gsvolu("ICU3", "TUBS", idtmed[274], dgh, 5); // carbon
+ }
+ gMC->Gspos("ICU3", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
+
+ // --- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART
+ // LOWER PART
+
+ dgh[0] = 62.1;
+ dgh[1] = 74.5;
+ dgh[2] = 0.5;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ if (suppmat == 0) {
+ gMC->Gsvolu("ICU4", "TUBS", idtmed[279], dgh, 5); // copper
+ } else if (suppmat == 1) {
+ gMC->Gsvolu("ICU4", "TUBS", idtmed[285], dgh, 5); // aluminum
+ } else {
+ gMC->Gsvolu("ICU4", "TUBS", idtmed[274], dgh, 5); // carbon
+ }
+ gMC->Gspos("ICU4", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
+
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - CARBON PART
-
- dgh[0] = 0.;
- dgh[1] = 360.;
- dgh[2] = 2.;
- dgh[3] = xltpc;
- dgh[4] = 62.5;
- dgh[5] = 74.5;
- dgh[6] = xltpc+1.5;
- dgh[7] = 62.5;
- dgh[8] = 74.5;
- gMC->Gsvolu("ICC2", "PCON", idtmed[274], dgh, 9);
- gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 0., 0, "ONLY");
+ // UPPER PART
+
+ dgh[0] = 62.1;
+ dgh[1] = 74.5;
+ dgh[2] = 0.75;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+ gMC->Gsvolu("ICC3", "TUBS", idtmed[274], dgh, 5);
+ gMC->Gspos("ICC3", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
+
+ // --- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - CARBON PART
+ // LOWER PART
+
+ dgh[0] = 62.1;
+ dgh[1] = 74.5;
+ dgh[2] = 0.75;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ gMC->Gsvolu("ICC4", "TUBS", idtmed[274], dgh, 5);
+ gMC->Gspos("ICC4", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
- // THE ABSORBER - COPPER PART
+ // THE ABSORBER - COPPER PART - UPPER PART
+
+ dgh[0] = 46.;
+ dgh[1] = 46.+1.0;
+ dgh[2] = (ztpc-97.5+1.5)/2.;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+ if (suppmat == 0) {
+ gMC->Gsvolu("ICU5", "TUBS", idtmed[279], dgh, 5); // copper
+ } else if (suppmat == 1) {
+ gMC->Gsvolu("ICU5", "TUBS", idtmed[285], dgh, 5); // aluminum
+ } else {
+ gMC->Gsvolu("ICU5", "TUBS", idtmed[274], dgh, 5); // carbon
+ }
+ gMC->Gspos("ICU5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
- dgh[0] = 45.;
- dgh[1] = 45.+1.0;
- dgh[2] = (xltpc-100.7+1.5)/2.;
- gMC->Gsvolu("ICU3", "TUBE", idtmed[279], dgh, 3);
- gMC->Gspos("ICU3", 1, "ITSV", 0., 0., -100.7-dgh[2], 0, "ONLY");
+ // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
+ // THE ABSORBER - COPPER PART - LOWER PART
+
+ dgh[0] = 46.;
+ dgh[1] = 46.+1.0;
+ dgh[2] = (ztpc-97.5+1.5)/2.;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ if (suppmat == 0) {
+ gMC->Gsvolu("ICU6", "TUBS", idtmed[279], dgh, 5); // copper
+ } else if (suppmat == 1) {
+ gMC->Gsvolu("ICU6", "TUBS", idtmed[285], dgh, 5); // aluminum
+ } else {
+ gMC->Gsvolu("ICU6", "TUBS", idtmed[274], dgh, 5); // carbon
+ }
+ gMC->Gspos("ICU6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
- // THE ABSORBER - CARBON PART
+ // THE ABSORBER - CARBON PART - UPPER PART
- dgh[0] = 45.+1.0;
- dgh[1] = 45.+1.0+1.5;
- dgh[2] = (xltpc-100.7)/2.;
- gMC->Gsvolu("ICC3", "TUBE", idtmed[274], dgh, 3);
- gMC->Gspos("ICC3", 1, "ITSV", 0., 0., -100.7-dgh[2], 0, "ONLY");
+ dgh[0] = 46.+1.0;
+ dgh[1] = 46.+1.0+1.5;
+ dgh[2] = (ztpc-97.5)/2.;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+ gMC->Gsvolu("ICC5", "TUBS", idtmed[274], dgh, 5);
+ gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
+
+ // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
+ // THE ABSORBER - CARBON PART - LOWER PART
+
+ dgh[0] = 46.+1.0;
+ dgh[1] = 46.+1.0+1.5;
+ dgh[2] = (ztpc-97.5)/2.;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ gMC->Gsvolu("ICC6", "TUBS", idtmed[274], dgh, 5);
+ gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
+ // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
+ // COPPER PART - UPPER PART
+
+ dgh[0] = 46.;
+ dgh[1] = 74.5;
+ dgh[2] = 0.5;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+ if (suppmat == 0) {
+ gMC->Gsvolu("ICU7", "TUBS", idtmed[279], dgh, 5); // copper
+ } else if (suppmat == 1) {
+ gMC->Gsvolu("ICU7", "TUBS", idtmed[285], dgh, 5); // aluminum
+ } else {
+ gMC->Gsvolu("ICU7", "TUBS", idtmed[274], dgh, 5); // carbon
+ }
+ gMC->Gspos("ICU7", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]), 0, "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
- // COPPER PART
+ // COPPER PART - LOWER PART
+
+ dgh[0] = 46.;
+ dgh[1] = 74.5;
+ dgh[2] = 0.5;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ if (suppmat == 0) {
+ gMC->Gsvolu("ICU8", "TUBS", idtmed[279], dgh, 5); // copper
+ } else if (suppmat == 1) {
+ gMC->Gsvolu("ICU8", "TUBS", idtmed[285], dgh, 5); // aluminum
+ } else {
+ gMC->Gsvolu("ICU8", "TUBS", idtmed[274], dgh, 5); // carbon
+ }
+ gMC->Gspos("ICU8", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]), 0, "ONLY");
+
+ // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
+ // CARBON PART - UPPER PART
- dgh[0] = 0.;
- dgh[1] = 360.;
- dgh[2] = 2.;
- dgh[3] = -xltpc-1.5-1.0;
- dgh[4] = 45.;
- dgh[5] = 74.5;
- dgh[6] = -xltpc-1.5;
- dgh[7] = 45.;
- dgh[8] = 74.5;
- gMC->Gsvolu("ICU4", "PCON", idtmed[279], dgh, 9);
- gMC->Gspos("ICU4", 1, "ITSV", 0., 0., 0., 0, "ONLY");
+ dgh[0] = 46.+1.0;
+ dgh[1] = 74.5;
+ dgh[2] = 0.75;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+ gMC->Gsvolu("ICC7", "TUBS", idtmed[274], dgh, 5);
+ gMC->Gspos("ICC7", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), 0, "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
- // CARBON PART
-
- dgh[0] = 0.;
- dgh[1] = 360.;
- dgh[2] = 2.;
- dgh[3] = -xltpc-1.5;
- dgh[4] = 45.+1.0;
- dgh[5] = 74.5;
- dgh[6] = -xltpc;
- dgh[7] = 45.+1.0;
- dgh[8] = 74.5;
- gMC->Gsvolu("ICC4", "PCON", idtmed[274], dgh, 9);
- gMC->Gspos("ICC4", 1, "ITSV", 0., 0., 0., 0, "ONLY");
+ // CARBON PART - LOWER PART
+
+ dgh[0] = 46.+1.0;
+ dgh[1] = 74.5;
+ dgh[2] = 0.75;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ gMC->Gsvolu("ICC8", "TUBS", idtmed[274], dgh, 5);
+ gMC->Gspos("ICC8", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), 0, "ONLY");
- // --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
+ // --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - UPPER PART
+
+ dgh[0] = 74.5;
+ dgh[1] = 79.5;
+ dgh[2] = 2.5;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+ gMC->Gsvolu("IHK1", "TUBS", idtmed[284], dgh, 5);
+ gMC->Gspos("IHK1", 1, "ITSV", 0., 0., -ztpc-dgh[2], 0, "ONLY");
+
+ // --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - LOWER PART
dgh[0] = 74.5;
dgh[1] = 79.5;
dgh[2] = 2.5;
- gMC->Gsvolu("IHOK", "TUBE", idtmed[284], dgh, 3);
- gMC->Gspos("IHOK", 1, "ITSV", 0., 0., -xltpc-dgh[2], 0, "ONLY");
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ gMC->Gsvolu("IHK2", "TUBS", idtmed[284], dgh, 5);
+ gMC->Gspos("IHK2", 1, "ITSV", 0., 0., -ztpc-dgh[2], 0, "ONLY");
// --- DEFINE RAILS BETWEEN THE ITS AND THE TPC
- dgh[0] = 0.85;
- dgh[1] = 10.;
- dgh[2] = 145.; // actual half length is 190. but clashes with services !
- gMC->Gsvolu("IRAI", "BOX ", idtmed[285], dgh, 3);
- gMC->Gspos("IRAI", 1, "ITSV", 53., 0., 0., 0, "ONLY");
- gMC->Gspos("IRAI", 2, "ITSV", -53., 0., 0., 0, "ONLY");
-
+ if (rails == 1) {
+ dgh[0] = 2.;
+ dgh[1] = 8.;
+ dgh[2] = 190.;
+ gMC->Gsvolu("IRA1", "BOX ", idtmed[239], dgh, 3);
+ gMC->Gspos("IRA1", 1, "ITSV", 53.5, 0., -69.5, 0, "ONLY");
+ gMC->Gsvolu("IRA2", "BOX ", idtmed[239], dgh, 3);
+ gMC->Gspos("IRA2", 1, "ITSV", -53.5, 0., -69.5, 0, "ONLY");
+
+ dgh[0] = 2.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
+ dgh[1] = 8.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
+ dgh[2] = 190.;
+ gMC->Gsvolu("IRA3", "BOX ", idtmed[275], dgh, 3);
+ gMC->Gspos("IRA3", 1, "IRA1", 0., 0., 0., 0, "ONLY");
+ gMC->Gsvolu("IRA4", "BOX ", idtmed[275], dgh, 3);
+ gMC->Gspos("IRA4", 1, "IRA2", 0., 0., 0., 0, "ONLY");
+
+ }
+
+ // --- DEFINE CYLINDERS HOLDING RAILS BETWEEN THE ITS AND THE TPC
+
+ dgh[0] = 56.9;
+ dgh[1] = 59.;
+ dgh[2] = 0.6;
+ gMC->Gsvolu("ICYL", "TUBE", idtmed[285], dgh, 3);
+ gMC->Gspos("ICYL", 1, "ALIC", 0., 0., 74.1, 0, "ONLY");
+ gMC->Gspos("ICYL", 2, "ALIC", 0., 0., -74.1, idrotm[200], "ONLY");
+
+ // --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE CYLINDERS
+
+ dgh[0] = 0.;
+ dgh[1] = 3.;
+ dgh[2] = 5.; // 5. comes from the fact that the volume has to be 567.6/2 cm^3
+ gMC->Gsvolu("ISR1", "TUBE", idtmed[286], dgh, 3);
+ gMC->Gspos("ISR1", 1, "ITSV", 53.4292, 10.7053, 79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 2, "ITSV", 53.4292, -10.7053, 79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 3, "ITSV", -53.4292, 10.7053, 79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 4, "ITSV", -53.4292, -10.7053, 79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 5, "ITSV", 53.4292, 10.7053, -79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 6, "ITSV", 53.4292, -10.7053, -79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 7, "ITSV", -53.4292, 10.7053, -79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 8, "ITSV", -53.4292, -10.7053, -79.75, 0, "ONLY");
+
+ // --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE ABSORBER
+
+ dgh[0] = 5.;
+ dgh[1] = 12.;
+ dgh[2] = 5.;
+ gMC->Gsvolu("ISR2", "BOX ", idtmed[285], dgh, 3);
+ gMC->Gspos("ISR2", 1, "ALIC", 53.5, 0., 125.5, 0, "ONLY");
+ gMC->Gsvolu("ISR3", "BOX ", idtmed[285], dgh, 3);
+ gMC->Gspos("ISR3", 1, "ALIC", -53.5, 0., 125.5, 0, "ONLY");
+
+ dgh[0] = 5.-2.;
+ dgh[1] = 12.-2.;
+ dgh[2] = 5.;
+ gMC->Gsvolu("ISR4", "BOX ", idtmed[275], dgh, 3);
+ gMC->Gspos("ISR4", 1, "ISR2", 0., 0., 0., 0, "ONLY");
+ gMC->Gsvolu("ISR5", "BOX ", idtmed[275], dgh, 3);
+ gMC->Gspos("ISR5", 1, "ISR3", 0., 0., 0., 0, "ONLY");
+
+ // --- DEFINE SUPPORTS TO ATTACH THE ITS TO THE TPC
+
+ dgh[0] = 0.;
+ dgh[1] = 5.;
+ dgh[2] = 2.;
+ gMC->Gsvolu("ISR6", "TUBE", idtmed[285], dgh, 3);
+ gMC->Gspos("ISR6", 1, "ALIC", 0., 54., 77., 0, "ONLY");
+ gMC->Gspos("ISR6", 2, "ALIC", 0., 54., -77., 0, "ONLY");
+ gMC->Gspos("ISR6", 3, "ALIC", 0., -54., -77., 0, "ONLY");
+
+
// --- Outputs the geometry tree in the EUCLID/CAD format
if (fEuclidOut) {
// Monte Carlo simulations for the geometries AliITSv1, AliITSv3,
// AliITSvPPRcoarseasymm.
// In general it is automatically replaced by
- // the CreatMaterials routine defined in AliITSv?. Should the function
+ // the CreateMaterials routine defined in AliITSv?. Should the function
// CreateMaterials not exist for the geometry version you are using this
// one is used. See the definition found in AliITSv5 or the other routine
// for a complete definition.
Float_t wsteel[4] = { .715,.18,.1,.005 };
- Int_t isxfld = gAlice->Field()->Integ();
- Float_t sxmgmx = gAlice->Field()->Max();
+ Int_t isxfld = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Integ();
+ Float_t sxmgmx = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Max();
// --- Define the various materials for GEANT ---
// 200-224 --> Silicon Pixel Detectors (detectors, chips, buses, cooling,..)
- AliMaterial(0, "SPD Si$", 28.0855, 14., 2.33, 9.36, 999);
- AliMaterial(1, "SPD Si chip$", 28.0855, 14., 2.33, 9.36, 999);
- AliMaterial(2, "SPD Si bus$", 28.0855, 14., 2.33, 9.36, 999);
- AliMaterial(3, "SPD C$", 12.011, 6., 2.265,18.8, 999);
+ AliMaterial(0, "SPD Si$", 28.0855, 14., 2.33, 9.36, 999.);
+ AliMaterial(1, "SPD Si chip$", 28.0855, 14., 2.33, 9.36, 999.);
+ AliMaterial(2, "SPD Si bus$", 28.0855, 14., 2.33, 9.36, 999.);
+ AliMaterial(3, "SPD C$", 12.011, 6., 2.265,18.8, 999.);
// v. dens
- AliMaterial(4, "SPD Air$", 14.61, 7.3, .001205, 30423., 999);
+ AliMaterial(4, "SPD Air$", 14.61, 7.3, .001205, 30423., 999.);
AliMaterial(5, "SPD Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16);
- AliMaterial(6, "SPD Al$", 26.981539, 13., 2.6989, 8.9, 999);
+ AliMaterial(6, "SPD Al$", 26.981539, 13., 2.6989, 8.9, 999.);
AliMixture( 7, "SPD Water $", awat, zwat, denswat, -2, wwat);
AliMixture( 8, "SPD Freon$", afre, zfre, densfre, -2, wfre);
- AliMaterial(9, "SPD End ladder$", 55.845, 26., 7.87/10., 1.76*10., 999);
- AliMaterial(10, "SPD cone$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
+ AliMaterial(9, "SPD End ladder$", 55.845, 26., 7.87/10., 1.76*10., 999.);
+ //AliMaterial(9, "SPD End ladder$", 55.845, 26., -7.87/10., -1.76*10., 999.);
+ AliMaterial(10, "SPD cone$",28.0855, 14., 2.33, 9.36, 999.); // check !!!!
// **
- AliMedium(0, "SPD Si$", 0, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(1, "SPD Si chip$", 1, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(2, "SPD Si bus$", 2, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(3, "SPD C$", 3, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(4, "SPD Air$", 4, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(5, "SPD Vacuum$", 5, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00);
- AliMedium(6, "SPD Al$", 6, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(7, "SPD Water $", 7, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(8, "SPD Freon$", 8, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(9, "SPD End ladder",9, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(10, "SPD cone$", 10, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(0, "SPD Si$", 0, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(1, "SPD Si chip$", 1, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(2, "SPD Si bus$", 2, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(3, "SPD C$", 3, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(4, "SPD Air$", 4, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(5, "SPD Vacuum$", 5, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00);
+ AliMedium(6, "SPD Al$", 6, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(7, "SPD Water $", 7, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(8, "SPD Freon$", 8, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(9, "SPD End ladder$",9, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(10, "SPD cone$", 10, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
// 225-249 --> Silicon Drift Detectors (detectors, chips, buses, cooling,..)
- AliMaterial(25, "SDD Si$", 28.0855, 14., 2.33, 9.36, 999);
- AliMaterial(26, "SDD Si chip$", 28.0855, 14., 2.33, 9.36, 999);
- AliMaterial(27, "SDD Si bus$", 28.0855, 14., 2.33, 9.36, 999);
- AliMaterial(28, "SDD C$", 12.011, 6., 2.265,18.8, 999);
+ AliMaterial(25, "SDD Si$", 28.0855, 14., 2.33, 9.36, 999.);
+ AliMaterial(26, "SDD Si chip$", 28.0855, 14., 2.33, 9.36, 999.);
+ AliMaterial(27, "SDD Si bus$", 28.0855, 14., 2.33, 9.36, 999.);
+ AliMaterial(28, "SDD C$", 12.011, 6., 2.265,18.8, 999.);
// v. dens
- AliMaterial(29, "SDD Air$", 14.61, 7.3, .001205, 30423., 999);
+ AliMaterial(29, "SDD Air$", 14.61, 7.3, .001205, 30423., 999.);
AliMaterial(30, "SDD Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16);
- AliMaterial(31, "SDD Al$", 26.981539, 13., 2.6989, 8.9, 999);
+ AliMaterial(31, "SDD Al$", 26.981539, 13., 2.6989, 8.9, 999.);
// After a call with ratios by number (negative number of elements),
// the ratio array is changed to the ratio by weight, so all successive
// calls with the same array must specify the number of elements as
// positive
AliMixture( 33, "SDD Freon$", afre, zfre, densfre, 2, wfre);
AliMixture( 34, "SDD PCB$", apcb, zpcb, denspcb, 3, wpcb);
- AliMaterial(35, "SDD Copper$", 63.546, 29., 8.96, 1.43, 999);
+ AliMaterial(35, "SDD Copper$", 63.546, 29., 8.96, 1.43, 999.);
AliMixture( 36, "SDD Ceramics$", acer, zcer, denscer, -5, wcer);
- AliMaterial(37, "SDD Kapton$", 12.011, 6., 1.3, 31.27, 999);
- AliMaterial(38, "SDD End ladder$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
- AliMaterial(39, "SDD cone$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
+ AliMaterial(37, "SDD Kapton$", 12.011, 6., 1.3, 31.27, 999.);
+ AliMaterial(38, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999.);
+ AliMaterial(39, "SDD cone$",63.546, 29., 1.15, 1.265, 999.);
+ AliMaterial(40, "SDD M55J$",12.3565, 6.4561, 1.8097, 22.9570, 999.);
+ //AliMaterial(38, "SDD End ladder$", 69.9298, 29.8246, -0.3824, -36.5103, 999.);
+ //AliMaterial(39, "SDD cone$",63.546, 29., -1.15, -1.265, 999.);
+
// **
// check A and Z
- AliMedium(25, "SDD Si$", 25, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(26, "SDD Si chip$", 26, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(27, "SDD Si bus$", 27, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(28, "SDD C$", 28, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(29, "SDD Air$", 29, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(30, "SDD Vacuum$", 30, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00);
- AliMedium(31, "SDD Al$", 31, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(32, "SDD Water $", 32, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(33, "SDD Freon$", 33, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(34, "SDD PCB$", 34, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(35, "SDD Copper$", 35, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(36, "SDD Ceramics$",36, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(37, "SDD Kapton$", 37, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(38, "SDD End ladder",38, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(39, "SDD cone$", 39, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
+ AliMedium(25, "SDD Si$", 25, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(26, "SDD Si chip$", 26, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(27, "SDD Si bus$", 27, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(28, "SDD C$", 28, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(29, "SDD Air$", 29, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(30, "SDD Vacuum$", 30, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00);
+ AliMedium(31, "SDD Al$", 31, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(32, "SDD Water $", 32, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(33, "SDD Freon$", 33, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(34, "SDD PCB$", 34, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(35, "SDD Copper$", 35, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(36, "SDD Ceramics$", 36, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(37, "SDD Kapton$", 37, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(38, "SDD End ladder$",38, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(39, "SDD cone$", 39, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(40, "SDD M55J$", 40, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
// 250-274 --> Silicon Strip Detectors (detectors, chips, buses, cooling,..)
AliMaterial(50, "SSD Si$", 28.0855, 14., 2.33, 9.36, 999.);
AliMaterial(52, "SSD Si bus$", 28.0855, 14., 2.33, 9.36, 999.);
AliMaterial(53, "SSD C$", 12.011, 6., 2.265,18.8, 999.);
// v. dens
- AliMaterial(54, "SSD Air$", 14.61, 7.3, .001205, 30423., 999);
+ AliMaterial(54, "SSD Air$", 14.61, 7.3, .001205, 30423., 999.);
AliMaterial(55, "SSD Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16);
- AliMaterial(56, "SSD Al$", 26.981539, 13., 2.6989, 8.9, 999);
+ AliMaterial(56, "SSD Al$", 26.981539, 13., 2.6989, 8.9, 999.);
// After a call with ratios by number (negative number of elements),
// the ratio array is changed to the ratio by weight, so all successive
// calls with the same array must specify the number of elements as
// the ratio array is changed to the ratio by weight, so all successive
// calls with the same array must specify the number of elements as
// positive
- AliMixture( 61, "SSD Ceramics$", acer, zcer, denscer, 5, wcer);
+ AliMixture(61, "SSD Ceramics$", acer, zcer, denscer, 5, wcer);
AliMaterial(62, "SSD Kapton$", 12.011, 6., 1.3, 31.27, 999.);
// check A and Z
AliMaterial(63, "SSD G10FR4$", 17.749, 8.875, 1.8, 21.822, 999.);
- AliMaterial(64, "SSD End ladder$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
- AliMaterial(65, "SSD cone$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
+ AliMaterial(64, "SSD End ladder$", 32.0988, 15.4021, 0.68, 35.3238, 999.);
+ AliMaterial(65, "SSD cone$",63.546, 29., 1.15, 1.265, 999.);
+ //AliMaterial(64, "SSD End ladder$", 32.0988, 15.4021, -0.68, -35.3238, 999.);
+ //AliMaterial(65, "SSD cone$",63.546, 29., -1.15, -1.265, 999.);
// **
- AliMedium(50, "SSD Si$", 50, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(51, "SSD Si chip$", 51, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(52, "SSD Si bus$", 52, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(53, "SSD C$", 53, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(54, "SSD Air$", 54, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(55, "SSD Vacuum$", 55, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00);
- AliMedium(56, "SSD Al$", 56, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(57, "SSD Water $", 57, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(58, "SSD Freon$", 58, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(59, "SSD PCB$", 59, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(60, "SSD Copper$", 60, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(61, "SSD Ceramics$",61, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(62, "SSD Kapton$", 62, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(63, "SSD G10FR4$", 63, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(64, "SPD End ladder",64, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(65, "SPD cone$", 65, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
+ AliMedium(50, "SSD Si$", 50, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(51, "SSD Si chip$", 51, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(52, "SSD Si bus$", 52, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(53, "SSD C$", 53, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(54, "SSD Air$", 54, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(55, "SSD Vacuum$", 55, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00);
+ AliMedium(56, "SSD Al$", 56, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(57, "SSD Water $", 57, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(58, "SSD Freon$", 58, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(59, "SSD PCB$", 59, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(60, "SSD Copper$", 60, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(61, "SSD Ceramics$", 61, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(62, "SSD Kapton$", 62, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(63, "SSD G10FR4$", 63, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(64, "SSD End ladder$",64, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(65, "SSD cone$", 65, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+
// 275-299 --> General (end-caps, frames, cooling, cables, etc.)
AliMaterial(75, "GEN C$", 12.011, 6., 2.265, 18.8, 999.);
// verify density
- AliMaterial(76, "GEN Air$", 14.61, 7.3, .001205, 30423., 999);
+ AliMaterial(76, "GEN Air$", 14.61, 7.3, .001205, 30423., 999.);
AliMaterial(77, "GEN Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16);
AliMixture( 78, "GEN POLYETHYL$", apoly, zpoly, .95, -2, wpoly);
AliMixture( 79, "GEN SERVICES$", aserv, zserv, 4.68, 4, wserv);
// AliMaterial(83, "GEN patch pan$", 12.011, 6., 2.265, 18.8, 999.); // check !!!
// AliMaterial(84, "GEN serv$", 12.011, 6., 2.265, 18.8, 999.); // check !!!
AliMixture(85, "GEN Inox$", asteel, zsteel, 7.88, 4, wsteel);
- AliMaterial(86, "GEN Al$", 26.981539, 13., 2.6989, 8.9, 999);
+ AliMaterial(86, "GEN Al$", 26.981539, 13., 2.6989, 8.9, 999.);
+ AliMaterial(87,"inox/alum$", 32.1502,15.3383,3.0705,6.9197,999.);
// **
AliMedium(75,"GEN C$", 75, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(76,"GEN Air$", 76, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
// AliMedium(84,"GEN serv$", 84, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(85,"GEN Inox$", 85, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(86, "GEN Al$", 86, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(87,"inox/alum$", 87, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+
}
//_____________________________________________________________________________
void AliITSvPPRcoarseasymm::Init(){
////////////////////////////////////////////////////////////////////////
// Initialise the ITS after it has been created.
////////////////////////////////////////////////////////////////////////
+ Int_t i;
- //
+ cout << endl;
+ for(i=0;i<24;i++) cout << "*";cout << " ITSvPPRcoarseasymm_Init ";
+ for(i=0;i<25;i++) cout << "*";cout << endl;
+//
AliITS::Init();
- fMajorVersion = 1;
- fMinorVersion = 0;
+//
+ for(i=0;i<72;i++) cout << "*";
+ cout << endl;
}
//_____________________________________________________________________________
-void AliITSvPPRcoarseasymm::DrawModule(){
+void AliITSvPPRcoarseasymm::DrawModule() const {
////////////////////////////////////////////////////////////////////////
// Draw a shaded view of the FMD version 6.
////////////////////////////////////////////////////////////////////////
hits[5]=momentum[2];
hits[6]=gMC->Edep();
hits[7]=gMC->TrackTime();
-// new(lhits[fNhits++]) AliITShit(fIshunt,gAlice->CurrentTrack(),vol,hits);
+// new(lhits[fNhits++]) AliITShit(fIshunt,gAlice->GetMCApp()->GetCurrentTrackNumber(),vol,hits);
//
// no hits for this coarse asymmetric version.
//
*/
}
-/*
-//____________________________________________________________________________
-void AliITSvPPRcoarseasymm::Streamer(TBuffer &R__b){
-////////////////////////////////////////////////////////////////////////
-// A dummy Streamer function for this class AliITSvPPRcoarseasymm. By default it
-// only streams the AliITS class as it is required. Since this class
-// dosen't contain any "real" data to be saved, it doesn't.
-////////////////////////////////////////////////////////////////////////
- if (R__b.IsReading()) {
- Version_t R__v = R__b.ReadVersion(); if (R__v) { }
- AliITS::Streamer(R__b);
- } else {
- R__b.WriteVersion(AliITSvPPRcoarseasymm::IsA());
- AliITS::Streamer(R__b);
- } // end if R__b.IsReading()
-}
-*/
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff