+/*
+Contact: henrik.tydesjo@cern.ch
+Link: tydes.home.cern.ch/tydes/doc/CalibrationOverview/CalibrationAlgorithms/
+Run Type: PHYSICS
+DA Type: MON
+Number of events needed: Depending on muliplicity per event
+Input Files: spd_physics_params , ./calibResults/DeadReferenceTmp/* , ./calibResults/DeadToFXS/*
+Output Files: ./calibResults/NoisyReference/* , ./calibResults/DeadReference/* , ./calibResults/NoisyToFXS/* , ./calibResults/DeadReferenceTmp/*,./calibResults/DeadToFXS/*
+Trigger types used: PHYSICS
+*/
+
+////////////////////////////////////////////////////////////////////////////////
+// This program can be compiled in two modes. //
+// //
+// 1. Online. With the DAQ DA framework. This is the default operating mode. //
+// //
+// 2. Offline. Without the DAQ DA framework. Define the SPD_DA_OFF //
+// environment var. Call this program with the name of the executable //
+// followed by the runNr and the data files to process. //
+// //
+////////////////////////////////////////////////////////////////////////////////
+
+#ifndef SPD_DA_OFF
+extern "C" {
+#include "daqDA.h"
+}
+#endif
+#include "event.h"
+#include "monitor.h"
+#include "AliRawReaderDate.h"
+#include "AliITSRawStreamSPD.h"
+#include "AliITSOnlineSPDphys.h"
+#include "AliITSOnlineSPDphysAnalyzer.h"
+#include "AliITSOnlineCalibrationSPDhandler.h"
+#include "AliLog.h"
+#include <iostream>
+#include <fstream>
+#include <time.h>
+#include <TROOT.h>
+#include <TPluginManager.h>
+#include <TObjArray.h>
+#include <TObjString.h>
+#include <TString.h>
+
+
+int main(int argc, char **argv) {
+ if (argc<2) {
+ printf("SPD DA ERROR: Wrong number of arguments\n");
+ return -1;
+ }
+
+ UInt_t nrErrors = 0;
+
+ // directory structure, hard coded // FOR OFFLINE VERSION:
+ char *saveDirDead = "./calibResults/Dead"; // may NOT delete content
+ char *saveDirDeadToFXS = "./calibResults/DeadToFXS"; // may delete content
+ char *saveDirDeadRef = "./calibResults/DeadReference"; // may delete content
+ char *saveDirDeadRefTmp = "./calibResults/DeadReferenceTmp"; // may NOT delete content
+ char *saveDirNoisyToFXS = "./calibResults/NoisyToFXS"; // may delete content
+ char *saveDirNoisyRef = "./calibResults/NoisyReference"; // may delete content
+ char *saveDirIdsToFXS = "./calibResults/IdsToFXS"; // may delete content
+ char *configFilesDir = "./configFiles"; // may delete content
+ // clean up and make sure the directory structure is put up correctly:
+#ifndef SPD_DA_OFF
+ system("rm ./calibResults -rf >& /dev/null");
+ system("rm ./ITS -rf >& /dev/null");
+#else
+ system("rm ./calibResults/DeadToFXS -rf >& /dev/null");
+ system("rm ./calibResults/DeadReference -rf >& /dev/null");
+ system("rm ./calibResults/NoisyToFXS -rf >& /dev/null");
+ system("rm ./calibResults/NoisyReference -rf >& /dev/null");
+ system("rm ./calibResults/IdsToFXS -rf >& /dev/null");
+#endif
+ system("mkdir ./calibResults >& /dev/null");
+ system("mkdir ./calibResults/Dead >& /dev/null");
+ system("mkdir ./calibResults/DeadToFXS >& /dev/null");
+ system("mkdir ./calibResults/DeadReference >& /dev/null");
+ system("mkdir ./calibResults/DeadReferenceTmp >& /dev/null");
+ system("mkdir ./calibResults/NoisyToFXS >& /dev/null");
+ system("mkdir ./calibResults/NoisyReference >& /dev/null");
+ system("mkdir ./calibResults/IdsToFXS >& /dev/null");
+ system("mkdir ./configFiles >& /dev/null");
+#ifndef SPD_DA_OFF
+ system("mkdir ./ITS >& /dev/null");
+ system("mkdir ./ITS/Calib >& /dev/null");
+ system("mkdir ./ITS/Calib/SPDNoisy >& /dev/null");
+#endif
+ // parameters config file
+ TString paramsFileName = Form("%s/physics_params.txt",configFilesDir);
+
+ // This line is needed in case of a stand-alone application w/o
+ // $ROOTSYS/etc/system.rootrc file
+ gROOT->GetPluginManager()->AddHandler("TVirtualStreamerInfo",
+ "*",
+ "TStreamerInfo",
+ "RIO",
+ "TStreamerInfo()");
+
+ // turn off annoying warning messages
+ // NB: Should not be handled here
+ AliLog logger = AliLog::GetRootLogger();
+ logger->SetGlobalDebugLevel(-20);
+
+ // ********* STEP 0: Get configuration files from db (if there are any) , then read parameters*********
+ UInt_t nrTuningParams = 0;
+ TObjArray paramNames; paramNames.SetOwner(kTRUE);
+ TObjArray paramVals; paramVals.SetOwner(kTRUE);
+
+ // tuning parameters:
+ Int_t par_status = 0;
+#ifndef SPD_DA_OFF
+ TString idp = "spd_physics_params";
+ par_status=daqDA_DB_getFile(idp.Data(),paramsFileName.Data());
+ if (par_status) {
+ printf("SPD DA: Failed to get config file %s: status=%d. Using default tuning parameters.\n",idp.Data(),par_status);
+ TString rmCmd = Form("rm -f %s",paramsFileName.Data());
+ system(rmCmd.Data());
+ }
+#endif
+ if (par_status==0) {
+ ifstream paramsFile;
+ paramsFile.open(paramsFileName.Data(), ifstream::in);
+ if (paramsFile.fail()) {
+ printf("SPD DA: No config file (%s) present. Using default tuning parameters.\n",paramsFileName.Data());
+ }
+ else {
+ while(1) {
+ Char_t paramN[50];
+ Char_t paramV[50];
+ paramsFile >> paramN;
+ if (paramsFile.eof()) break;
+ paramsFile >> paramV;
+ paramNames.AddAtAndExpand(new TObjString(paramN),nrTuningParams);
+ paramVals.AddAtAndExpand(new TObjString(paramV),nrTuningParams);
+ nrTuningParams++;
+ if (paramsFile.eof()) break;
+ }
+ paramsFile.close();
+ }
+ }
+ // for (UInt_t i=0; i<nrTuningParams; i++) {
+ // // printf("Entry %d: N=%s , V=%s\n",i,((TString*)paramNames.At(i))->Data(),((TString*)paramVals.At(i))->Data());
+ // printf("Entry %d: N=%s , V=%s\n",i,((TObjString*)paramNames.At(i))->GetString().Data(),((TObjString*)paramVals.At(i))->GetString().Data());
+ // }
+
+
+
+
+
+ // create calibration handler (needed already at step 1 in order to fill which eq,hs,chips are active
+ AliITSOnlineCalibrationSPDhandler* handler = new AliITSOnlineCalibrationSPDhandler();
+
+ // Read silent=dead+inactive info from previous calibrations
+#ifndef SPD_DA_OFF
+ for (UInt_t eq=0; eq<20; eq++) {
+ Int_t getPreviousDead_status = 0;
+ TString idpd = Form("spd_previous_dead_%d",eq);
+ TString fileName = Form("%s/SPD_Dead_%d.root",saveDirDead,eq);
+ getPreviousDead_status = daqDA_DB_getFile(idpd.Data(),fileName.Data());
+ // printf("daqDA_DB_getFile(%s,%s)\n",idpd.Data(),fileName.Data());
+ if (getPreviousDead_status) {
+ printf("SPD DA: Failed to get dead file %s: status=%d. Dead search will start from zero for this eq.\n",idpd.Data(),getPreviousDead_status);
+ TString rmCmd = Form("rm -f %s",fileName.Data());
+ system(rmCmd.Data());
+ }
+ }
+#endif
+ handler->SetFileLocation(saveDirDead);
+ handler->ReadSilentFromFiles();
+ printf("SPD DA: Number of single dead pixels from previous runs: %d\n",handler->GetNrDead());
+
+ // Read hit-maps from previous runs
+#ifndef SPD_DA_OFF
+ for (UInt_t eq=0; eq<20; eq++) {
+ Int_t getPreviousHitmap_status = 0;
+ TString idph = Form("spd_previous_hitmap_%d",eq);
+ TString fileName = Form("%s/SPDphys_dead_run_0_0_eq_%d.root",saveDirDeadRefTmp,eq);
+ getPreviousHitmap_status = daqDA_DB_getFile(idph.Data(),fileName.Data());
+ // printf("daqDA_DB_getFile(%s,%s)\n",idph.Data(),fileName.Data());
+ if (getPreviousHitmap_status) {
+ printf("SPD DA: Failed to get previous hitmap file %s: status=%d. Dead search will start with empty hitmap for this eq.\n",idph.Data(),getPreviousHitmap_status);
+ TString rmCmd = Form("rm -f %s",fileName.Data());
+ system(rmCmd.Data());
+ }
+ }
+#endif
+
+
+
+
+ // ********* STEP 1: Produce phys container files (Reference Data). ***********************************
+
+#ifndef SPD_DA_OFF
+ if (getenv("DATE_RUN_NUMBER")==0) {
+ printf("SPD DA ERROR: DATE_RUN_NUMBER not properly set.\n");
+ return -1;
+ }
+ int runNr = atoi(getenv("DATE_RUN_NUMBER"));
+#else
+ int runNr = atoi(argv[1]);
+ int startSeg = 2;
+#endif
+
+
+ // container objects
+ AliITSOnlineSPDphys *physObj[20];
+ Bool_t bPhysInit[20];
+ for (UInt_t eq=0; eq<20; eq++) {
+ physObj[eq]=NULL;
+ bPhysInit[eq]=kFALSE;
+ }
+
+
+ UInt_t eventNr=0;
+
+ // loop over run segments in case of offline mode
+#ifdef SPD_DA_OFF
+ for (int segNr=startSeg; segNr<argc; segNr++) {
+#endif
+
+ int status;
+
+ /* define data source : */
+#ifndef SPD_DA_OFF
+ status=monitorSetDataSource( argv[1] ); // should be "^SPD" in order to get full detector online
+#else
+ status=monitorSetDataSource( argv[segNr] );
+#endif
+ if (status!=0) {
+ printf("SPD DA ERROR: monitorSetDataSource() failed : %s\n",monitorDecodeError(status));
+ return -1;
+ }
+ /* declare monitoring program */
+ status=monitorDeclareMp("ITS_SPD_PHYS");
+ if (status!=0) {
+ printf("SPD DA ERROR: monitorDeclareMp() failed : %s\n",monitorDecodeError(status));
+ return -1;
+ }
+ /* define wait event timeout - 1s max */
+ monitorSetNowait();
+ monitorSetNoWaitNetworkTimeout(1000);
+
+
+ /* main loop (infinite) */
+ for(;;) {
+
+ struct eventHeaderStruct *event;
+ eventTypeType eventT;
+
+ /* check shutdown condition */
+#ifndef SPD_DA_OFF
+ if (daqDA_checkShutdown()) {break;}
+#endif
+
+ /* get next event (blocking call until timeout) */
+ status=monitorGetEventDynamic((void **)&event);
+ if (status==MON_ERR_EOF) {
+ printf ("SPD DA: End of File detected\n");
+ break; /* end of monitoring file has been reached */
+ }
+
+ if (status!=0) {
+ printf("SPD DA: monitorGetEventDynamic() failed : %s\n",monitorDecodeError(status));
+ break;
+ }
+
+ /* retry if got no event */
+ if (event==NULL) {
+ continue;
+ }
+
+ eventT=event->eventType;
+ if (eventT == PHYSICS_EVENT){
+
+ // printf("eventNr %d\n",eventNr);
+
+ AliRawReader *reader = new AliRawReaderDate((void*)event);
+ AliITSRawStreamSPD *str = new AliITSRawStreamSPD(reader);
+
+ while (str->Next()) {
+
+ Int_t eq = reader->GetDDLID();
+ // check that this hs is active in handler object
+ if (!(handler->IsActiveEq(eq))) {
+ printf("SPD DA: Found Eq (%d) , previously inactive\n",eq);
+ handler->ActivateEq(eq);
+ }
+ if (eq>=0 && eq<20) {
+ if (!bPhysInit[eq]) { // this code is duplicated for the moment... (see also below)
+ TString fileName = Form("%s/SPDphys_run_%d_eq_%d.root",saveDirNoisyRef,runNr,eq);
+ physObj[eq] = new AliITSOnlineSPDphys(fileName.Data());
+ physObj[eq]->AddRunNr(runNr);
+ physObj[eq]->SetEqNr(eq);
+ bPhysInit[eq]=kTRUE;
+ }
+
+ UInt_t hs = str->GetHalfStaveNr();
+ // check that this hs is active in handler object
+ if (!(handler->IsActiveHS(eq,hs))) {
+ printf("SPD DA: Found HS (%d,%d) , previously inactive\n",eq,hs);
+ handler->ActivateHS(eq,hs);
+ }
+ UInt_t chip = str->GetChipAddr();
+ // check that this chip is active in handler object
+ if (!(handler->IsActiveChip(eq,hs,chip))) {
+ printf("SPD DA: Found Chip (%d,%d,%d) , previously inactive\n",eq,hs,chip);
+ handler->ActivateChip(eq,hs,chip);
+ }
+ physObj[eq]->IncrementHits(hs,chip,str->GetChipCol(),str->GetChipRow());
+
+ }
+ }
+
+
+ // check which eq and hs are active, for first event only
+ if (eventNr==0) {
+ for (UInt_t eq=0; eq<20; eq++) {
+ // activate Eq and HSs in handler object
+ if (str->IsActiveEq(eq)) {
+ handler->ActivateEq(eq);
+ for (UInt_t hs=0; hs<6; hs++) {
+ if (str->IsActiveHS(eq,hs)) {
+ handler->ActivateHS(eq,hs);
+ for (UInt_t chip=0; chip<10; chip++) {
+ if (str->IsActiveChip(eq,hs,chip)) {
+ handler->ActivateChip(eq,hs,chip);
+ }
+ else {
+ handler->ActivateChip(eq,hs,chip,kFALSE);
+ }
+ }
+ }
+ else {
+ handler->ActivateHS(eq,hs,kFALSE);
+ }
+ }
+ if (!bPhysInit[eq]) { // this code is duplicated for the moment... (see also above)
+ TString fileName = Form("%s/SPDphys_run_%d_eq_%d.root",saveDirNoisyRef,runNr,eq);
+ physObj[eq] = new AliITSOnlineSPDphys(fileName.Data());
+ physObj[eq]->AddRunNr(runNr);
+ physObj[eq]->SetEqNr(eq);
+ bPhysInit[eq]=kTRUE;
+ }
+ }
+ else {
+ handler->ActivateEq(eq,kFALSE);
+ }
+ }
+ }
+
+
+ for (UInt_t eq=0; eq<20; eq++) {
+ if (bPhysInit[eq]) {
+ physObj[eq]->IncrementNrEvents();
+ }
+ }
+
+ delete str;
+ delete reader;
+
+ eventNr++;
+
+ }
+
+ /* free resources */
+ free(event);
+
+ }
+
+
+#ifdef SPD_DA_OFF
+ printf("SPD DA: progress: %d\n",(unsigned int)( ((Float_t)(segNr-startSeg+1))/(argc-startSeg)*50 ));
+ }
+#endif
+
+ // clean up phys objects (also saves them)
+ for (UInt_t eq=0; eq<20; eq++) {
+ if (physObj[eq]!=NULL) delete physObj[eq];
+ }
+
+ printf("SPD DA: %d events collected for this run.\n",eventNr);
+
+
+
+
+ // ********* STEP 2: Analyze phys container files. ************************************************
+
+ time_t timeStamp = time(NULL);
+ // printf("*** Start step2 , %d\n",time(NULL) - timeStamp);
+
+ UInt_t firstRunNrDead = runNr;
+
+
+ UInt_t nrEnoughStatNoisy = 0;
+ UInt_t nrEqActiveNoisy = 0;
+ Bool_t eqActiveNoisy[20];
+
+ // *** *** *** start loop over equipments (eq_id)
+ for (UInt_t eq=0; eq<20; eq++) {
+ eqActiveNoisy[eq] = kFALSE;
+
+ // create analyzer for this eq
+ TString fileName = Form("%s/SPDphys_run_%d_eq_%d.root",saveDirNoisyRef,runNr,eq);
+ AliITSOnlineSPDphysAnalyzer *noisyAnalyzer = new AliITSOnlineSPDphysAnalyzer(fileName.Data(),handler);
+
+ // check data in container
+ if (noisyAnalyzer->GetEqNr() != eq) {
+ if (noisyAnalyzer->GetEqNr() != 999) {
+ printf("SPD DA ERROR: Mismatching EqId in Container data and filename (%d!=%d). Skipping eq.\n",noisyAnalyzer->GetEqNr(),eq);
+ }
+ delete noisyAnalyzer;
+ continue;
+ }
+
+ nrEqActiveNoisy++;
+ eqActiveNoisy[eq] = kTRUE;
+
+ // configure analyzer with tuning parameters etc:
+ for (UInt_t i=0; i<nrTuningParams; i++) {
+ noisyAnalyzer->SetParam(((TObjString*)paramNames.At(i))->GetString().Data(),((TObjString*)paramVals.At(i))->GetString().Data());
+ }
+
+ printf("SPD DA: SPD phys STEP 2: Noisy search for eq %d\n",eq);
+
+ // search for noisy pixels:
+ nrEnoughStatNoisy += noisyAnalyzer->ProcessNoisyPixels();
+
+ // copy this phys obj to temporary dead reference dir to process after noisy search
+ TString fileNameDead = Form("%s/SPDphys_dead_run_0_0_eq_%d.root",saveDirDeadRefTmp,eq);
+ AliITSOnlineSPDphys* physObj = new AliITSOnlineSPDphys(fileNameDead.Data());
+ physObj->AddPhys(noisyAnalyzer->GetOnlinePhys());
+ if (physObj->GetNrRuns()>0) {
+ UInt_t firstRunNr = physObj->GetRunNr(0);
+ if (firstRunNrDead>firstRunNr) {
+ firstRunNrDead=firstRunNr;
+ }
+ }
+ // remove noisy pixels from dead hitmap
+ for (UInt_t hs=0; hs<6; hs++) {
+ for (UInt_t chip=0; chip<10; chip++) {
+ for (UInt_t ind=0; ind<handler->GetNrNoisyC(eq,hs,chip); ind++) {
+ UInt_t col = handler->GetNoisyColAtC(eq,hs,chip,ind);
+ UInt_t row = handler->GetNoisyRowAtC(eq,hs,chip,ind);
+ physObj->AddHits(hs,chip,col,row,-noisyAnalyzer->GetOnlinePhys()->GetHits(hs,chip,col,row));
+ }
+ }
+ }
+
+ delete physObj;
+ delete noisyAnalyzer;
+
+#ifndef SPD_DA_OFF
+ // daqDA_progressReport((unsigned int)((eq+1)*2.5));
+ printf("SPD DA: progress: %d , %ld\n",(unsigned int)(50+(eq+1)*2.5), time(NULL) - timeStamp);
+#else
+ // printf("SPD DA: progress: %d\n",(unsigned int)(50+(eq+1)*1.25));
+ printf("SPD DA: progress: %d , %ld\n",(unsigned int)(50+(eq+1)*1.25), time(NULL) - timeStamp);
+#endif
+ }
+ // *** *** *** end loop over equipments (eq_id)
+
+ printf("SPD DA: Noisy search finished. %d noisy pixels found. %d chips had enough statistics.\n",
+ handler->GetNrNoisy(),nrEnoughStatNoisy);
+ handler->SetFileLocation(saveDirNoisyToFXS);
+ UInt_t nrNoisyFilesProduced = handler->WriteNoisyToFiles();
+#ifndef SPD_DA_OFF
+ // save noisy to local OCDB
+ handler->WriteNoisyToDB(runNr,9999999,".");
+ // store local OCDB file in daq Det DB
+ TString ocdb_fileName = Form("./ITS/Calib/SPDNoisy/Run%d_9999999_v0_s0.root",runNr);
+ TString idod = "spd_noisy_ocdb";
+ Int_t ocdb_store_status = daqDA_DB_storeFile(ocdb_fileName.Data(),idod.Data());
+ // printf("daqDA_DB_storeFile(%s,%s)\n",ocdb_fileName.Data(),idod.Data());
+ if (ocdb_store_status) {
+ printf("SPD DA ERROR: Failed to store noisy ocdb file %s in daqDetDB: status=%d.\n",idod.Data(),ocdb_store_status);
+ }
+#endif
+
+
+
+
+
+ UInt_t nrEnoughStatChips = 0;
+ UInt_t nrDeadChips = 0;
+ UInt_t nrInefficientChips = 0;
+ UInt_t nrEqActiveDead = 0;
+ Bool_t eqActiveDead[20];
+
+ // *** *** *** start loop over equipments (eq_id)
+ for (UInt_t eq=0; eq<20; eq++) {
+ eqActiveDead[eq] = kFALSE;
+
+ // setup analyzer for dead search
+ TString fileNameDead = Form("%s/SPDphys_dead_run_0_0_eq_%d.root",saveDirDeadRefTmp,eq);
+ AliITSOnlineSPDphys* physObj = new AliITSOnlineSPDphys(fileNameDead.Data());
+ AliITSOnlineSPDphysAnalyzer* deadAnalyzer = new AliITSOnlineSPDphysAnalyzer(physObj,handler);
+ // check data in container
+ if (deadAnalyzer->GetEqNr() != eq) {
+ if (deadAnalyzer->GetEqNr() != 999) {
+ printf("SPD DA ERROR: Mismatching EqId in Dead Container data and filename (%d!=%d). Skipping eq.\n",deadAnalyzer->GetEqNr(),eq);
+ }
+ delete deadAnalyzer;
+ nrDeadChips+=60; // since this eq is inactive...
+ continue;
+ }
+
+ nrEqActiveDead++;
+ eqActiveDead[eq] = kTRUE;
+
+ // configure analyzer with tuning parameters etc:
+ for (UInt_t i=0; i<nrTuningParams; i++) {
+ deadAnalyzer->SetParam(((TObjString*)paramNames.At(i))->GetString().Data(),((TObjString*)paramVals.At(i))->GetString().Data());
+ }
+
+ UInt_t nrEventsCollected = physObj->GetNrEvents();
+ printf("SPD DA: SPD phys STEP 2: Dead search for eq %d (%d events)\n",eq,nrEventsCollected);
+
+ // search for dead pixels:
+ nrEnoughStatChips += deadAnalyzer->ProcessDeadPixels();
+ nrDeadChips += deadAnalyzer->GetNrDeadChips();
+ nrInefficientChips += deadAnalyzer->GetNrInefficientChips();
+
+ delete deadAnalyzer;
+
+
+#ifndef SPD_DA_OFF
+ // daqDA_progressReport((unsigned int)(50+(eq+1)*2.5));
+ printf("SPD DA: progress: %d , %ld\n",(unsigned int)(50+(eq+1)*2.5), time(NULL) - timeStamp);
+#else
+ // printf("SPD DA: progress: %d\n",(unsigned int)(75+(eq+1)*1.25));
+ printf("SPD DA: progress: %d , %ld\n",(unsigned int)(75+(eq+1)*1.25), time(NULL) - timeStamp);
+#endif
+ }
+ // *** *** *** end loop over equipments (eq)
+
+
+
+
+ printf("SPD DA: Dead search finished.\n");
+ printf("SPD DA: %d single dead pixels , %d dead or inactive pixels in total.\n",handler->GetNrDead(),handler->GetNrSilent());
+ printf("SPD DA: %d chips had enough statistics. %d chips are dead. %d chips are inefficient.\n",nrEnoughStatChips,nrDeadChips,nrInefficientChips);
+ handler->SetFileLocation(saveDirDead);
+ handler->WriteSilentToFilesAlways();
+ handler->SetFileLocation(saveDirDeadToFXS);
+ handler->WriteSilentToFilesAlways();
+
+
+ // printf("SPD DA: Opening id list file\n");
+ printf("SPD DA: Opening id list file , %ld\n",time(NULL) - timeStamp);
+ TString idsFXSFileName = Form("%s/FXSids_run_%d.txt",saveDirIdsToFXS,runNr);
+ ofstream idsFXSfile;
+ idsFXSfile.open(idsFXSFileName.Data());
+
+
+ // store dead+inactive pixels in DB, used as starting point for later runs
+#ifndef SPD_DA_OFF
+ printf("store previous dead in DB , %ld\n",time(NULL) - timeStamp);
+ for (UInt_t eq=0; eq<20; eq++) {
+ Int_t storePreviousDead_status = 0;
+ TString idpd = Form("spd_previous_dead_%d",eq);
+ TString fileName = Form("%s/SPD_Dead_%d.root",saveDirDead,eq);
+ storePreviousDead_status = daqDA_DB_storeFile(fileName.Data(),idpd.Data());
+ // printf("daqDA_DB_storeFile(%s,%s)\n",fileName.Data(),idpd.Data());
+ if (storePreviousDead_status) {
+ printf("SPD DA ERROR: Failed to store dead file %s in daqDetDB: status=%d.\n",idpd.Data(),storePreviousDead_status);
+ }
+ }
+#endif
+
+
+ // send (dead) reference data for this run to FXS - only if there is no chip in category "needsMoreStat"
+ if (nrEnoughStatChips>0 && nrEnoughStatChips+nrDeadChips+nrInefficientChips == 1200) {
+ printf("SPD DA: Dead calibration is complete.\n");
+ printf("SPD DA: Preparing dead reference data\n");
+ // send reference data for dead pixels to FXS
+ TString tarFiles = "";
+ for (UInt_t eq=0; eq<20; eq++) {
+ if (eqActiveDead[eq]) {
+ printf("SPD DA: Preparing dead pixels for eq %d\n",eq);
+ // move file to ref dir
+ TString fileName = Form("%s/SPDphys_dead_run_0_0_eq_%d.root",saveDirDeadRefTmp,eq);
+ TString newFileName = Form("%s/SPDphys_dead_run_%d_%d_eq_%d.root",saveDirDeadRef,firstRunNrDead,runNr,eq);
+ TString command = Form("mv -f %s %s",fileName.Data(),newFileName.Data());
+ system(command.Data());
+ tarFiles.Append(Form("SPDphys_dead_run_%d_%d_eq_%d.root ",firstRunNrDead,runNr,eq));
+ // create empty hitmap file to send to DB later
+ AliITSOnlineSPDphys* physObj = new AliITSOnlineSPDphys(fileName.Data());
+ physObj->SetEqNr(eq);
+ delete physObj;
+ }
+ }
+ if (tarFiles.Length() > 0) { // make sure there are some files to send
+ TString send_command = Form("cd %s; tar -cf ref_phys_dead.tar %s",saveDirDeadRef,tarFiles.Data());
+ system(send_command.Data());
+ TString fileName = Form("%s/ref_phys_dead.tar",saveDirDeadRef);
+ TString id = "SPD_ref_phys_dead";
+#ifndef SPD_DA_OFF
+ status = daqDA_FES_storeFile(fileName.Data(),id.Data());
+ if (status!=0) {
+ printf("SPD DA ERROR: Failed to export file %s , status %d\n",fileName.Data(),status);
+ nrErrors++;
+ }
+#endif
+ idsFXSfile << Form("%s\n",id.Data());
+ }
+ }
+
+ // store hitmaps (maybe empty) in DB, used as starting point for later runs:
+#ifndef SPD_DA_OFF
+ printf("store previous hitmaps in DB , %ld\n",time(NULL) - timeStamp);
+ for (UInt_t eq=0; eq<20; eq++) {
+ Int_t storePreviousHitmap_status = 0;
+ TString idph = Form("spd_previous_hitmap_%d",eq);
+ TString fileName = Form("%s/SPDphys_dead_run_0_0_eq_%d.root",saveDirDeadRefTmp,eq);
+ storePreviousHitmap_status = daqDA_DB_storeFile(fileName.Data(),idph.Data());
+ // printf("daqDA_DB_storeFile(%s,%s)\n",fileName.Data(),idph.Data());
+ if (storePreviousHitmap_status) {
+ printf("SPD DA ERROR: Failed to store hitmap file %s in daqDetDB: status=%d.\n",idph.Data(),storePreviousHitmap_status);
+ }
+ }
+#endif
+
+
+
+ // send (noisy) reference data for this run to FXS
+ // printf("SPD DA: Preparing physics reference data for this run\n");
+ printf("SPD DA: Preparing physics reference data for this run , %ld\n",time(NULL) - timeStamp);
+ TString tarFiles = "";
+ for (UInt_t eq=0; eq<20; eq++) {
+ if (eqActiveNoisy[eq]) {
+ tarFiles.Append(Form("SPDphys_run_%d_eq_%d.root ",runNr,eq));
+ }
+ }
+ if (tarFiles.Length() > 0) { // make sure there are any files to send
+ TString send_command = Form("cd %s; tar -cf ref_phys.tar %s",saveDirNoisyRef,tarFiles.Data());
+ system(send_command.Data());
+ TString fileName = Form("%s/ref_phys.tar",saveDirNoisyRef);
+ TString id = "SPD_ref_phys";
+#ifndef SPD_DA_OFF
+ status = daqDA_FES_storeFile(fileName.Data(),id.Data());
+ if (status!=0) {
+ printf("SPD DA ERROR: Failed to export file %s , status %d\n",fileName.Data(),status);
+ nrErrors++;
+ }
+#endif
+ idsFXSfile << Form("%s\n",id.Data());
+ }
+
+
+
+ // send dead pixels to FXS
+ // printf("SPD DA: Preparing dead files for FXS\n");
+ printf("SPD DA: Preparing dead files for FXS , %ld\n",time(NULL) - timeStamp);
+ // send a tared file of all the dead files
+ TString send_command = Form("cd %s; tar -cf dead_phys.tar *",saveDirDeadToFXS);
+ // printf("\n\n%s\n\n",command.Data());
+ system(send_command.Data());
+ TString fileName = Form("%s/dead_phys.tar",saveDirDeadToFXS);
+ TString id = "SPD_phys_dead";
+#ifndef SPD_DA_OFF
+ Int_t send_status = daqDA_FES_storeFile(fileName.Data(),id.Data());
+ if (send_status!=0) {
+ printf("SPD DA ERROR: Failed to export file %s , status %d\n",fileName.Data(),send_status);
+ nrErrors++;
+ }
+#endif
+ idsFXSfile << Form("%s\n",id.Data());
+
+
+
+ // send noisy pixels to FXS
+ if (nrNoisyFilesProduced > 0) { // make sure there is at least one file created
+ // printf("SPD DA: Preparing noisy files for FXS\n");
+ printf("SPD DA: Preparing noisy files for FXS , %ld\n",time(NULL) - timeStamp);
+ // send a tared file of all the noisy files
+ TString command = Form("cd %s; tar -cf noisy_phys.tar *",saveDirNoisyToFXS);
+ // printf("\n\n%s\n\n",command.Data());
+ system(command.Data());
+ TString fileName = Form("%s/noisy_phys.tar",saveDirNoisyToFXS);
+ TString id = "SPD_phys_noisy";
+#ifndef SPD_DA_OFF
+ status = daqDA_FES_storeFile(fileName.Data(),id.Data());
+ if (status!=0) {
+ printf("SPD DA ERROR: Failed to export file %s , status %d\n",fileName.Data(),status);
+ nrErrors++;
+ }
+#endif
+ idsFXSfile << Form("%s\n",id.Data());
+ }
+
+
+
+ // send ids file to FXS
+ idsFXSfile.close();
+ id = "SPD_id_list";
+#ifndef SPD_DA_OFF
+ status = daqDA_FES_storeFile(idsFXSFileName.Data(),id.Data());
+ if (status!=0) {
+ printf("SPD DA ERROR: Failed to export file %s , status %d\n",idsFXSFileName.Data(),status);
+ nrErrors++;
+ }
+#endif
+
+
+
+
+ delete handler;
+
+ printf("SPD DA: End of all operations, %d errors, %ld\n", nrErrors, time(NULL) - timeStamp);
+
+ if (nrErrors>0) return -1;
+
+ return 0;
+
+}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff