#include "AliMUONRecoParam.h"
+#include "AliMUONPadStatusMaker.h"
+#include "AliRecoParam.h"
#include "AliLog.h"
-#include "AliMUONPadStatusMaker.h"
+
+#include "AliCDBManager.h"
+#include "AliCDBEntry.h"
#include <Riostream.h>
: AliDetectorRecoParam(),
fClusteringMode("MLEM"),
fTrackingMode("KALMAN"),
- fMostProbBendingMomentum(0.),
fMinBendingMomentum(0.),
fMaxBendingMomentum(0.),
fMaxNonBendingSlope(0.),
fSaveFullClusterInESD(kTRUE),
fCalibrationMode("NOGAIN"),
fBypassSt45(0),
- fPadGoodnessMask(0)
-{
+ fPadGoodnessMask(0),
+ fChargeSigmaCut(4.0),
+ fRemoveConnectedTracksInSt12(kFALSE),
+ fMaxTriggerTracks(0),
+ fMaxTrackCandidates(0),
+ fSelectTrackOnSlope(kFALSE),
+ fMissingPadFractionLimit(-1),
+ fFractionOfBuspatchOutsideOccupancyLimit(0),
+ fAverageNoisePadCharge(0.22875),
+ fClusterChargeCut(2.0),
+ fEventSizeSoftLimit(35.0),
+ fEventSizeHardLimit(45.0),
+ fTokenLostLimit(0.0),
+ fTryRecover(kFALSE)
+{
/// Constructor
- SetNameTitle("MUON","MUON");
- SetDefaultLimits();
-
- // use the default parameters for low flux environment
- SetLowFluxParam();
+ SetNameTitle("Dummy","Dummy");
+ for (Int_t iCh = 0; iCh < 10; iCh++) {
+ fUseChamber[iCh] = kTRUE;
+ fDefaultNonBendingReso[iCh] = 0.;
+ fDefaultBendingReso[iCh] = 0.;
+ }
+ for (Int_t iSt = 0; iSt < 5; iSt++) fRequestStation[iSt] = kTRUE;
+ SetDefaultLimits();
}
//_____________________________________________________________________________
/// NOGAIN : only do pedestal subtraction
/// GAIN : do pedestal subtraction, and apply gain correction, but with a
/// single capacitance value for all channels
+ /// INJECTIONGAIN : as GAIN, but with gain values taken as EMELEC factory values
/// GAINCONSTANTCAPA : as GAIN, but with a channel-dependent capacitance value
return fCalibrationMode.Data();
return param;
}
+//_____________________________________________________________________________
+AliMUONRecoParam *AliMUONRecoParam::GetCalibrationParam()
+{
+ /// Return default (dummy) reconstruction parameters for calibration environment
+
+ AliMUONRecoParam *param = new AliMUONRecoParam();
+ param->SetCalibrationParam();
+
+ return param;
+}
+
+
//_____________________________________________________________________________
void AliMUONRecoParam::SetLowFluxParam()
{
/// Set reconstruction parameters for low flux environment
- fMostProbBendingMomentum = 2.;
- fMinBendingMomentum = 1.;
- fMaxBendingMomentum = 3000.;
+ SetNameTitle("Low Flux","Low Flux");
+ SetEventSpecie(AliRecoParam::kLowMult);
+ fMinBendingMomentum = 0.8;
+ fMaxBendingMomentum = 1.e10;
fMaxNonBendingSlope = 0.3;
fMaxBendingSlope = 0.4;
- fNonBendingVertexDispersion = 10.;
- fBendingVertexDispersion = 10.;
+ fSelectTrackOnSlope = kFALSE;
+ fNonBendingVertexDispersion = 70.;
+ fBendingVertexDispersion = 70.;
fMaxNonBendingDistanceToTrack = 1.;
fMaxBendingDistanceToTrack = 1.;
fSigmaCutForTracking = 6.;
fSigmaCutForImprovement = 5.;
- fSigmaCutForTrigger = 8.;
+ fSigmaCutForTrigger = 4.;
fStripCutForTrigger = 1.;
fMaxStripAreaForTrigger = 3.;
- fMaxNormChi2MatchTrigger = 16.;
+ fMaxNormChi2MatchTrigger = fSigmaCutForTrigger * fSigmaCutForTrigger;
fCombinedClusterTrackReco = kFALSE;
fTrackAllTracks = kTRUE;
fRecoverTracks = kTRUE;
fMakeMoreTrackCandidates = kFALSE;
fComplementTracks = kTRUE;
fImproveTracks = kTRUE;
+ fRemoveConnectedTracksInSt12 = kFALSE;
fUseSmoother = kTRUE;
- for (Int_t iCh = 0; iCh < 10; iCh++) fUseChamber[iCh] = kTRUE;
+ for (Int_t iCh = 0; iCh < 10; iCh++) {
+ fUseChamber[iCh] = kTRUE;
+ fDefaultNonBendingReso[iCh] = 0.144;
+ fDefaultBendingReso[iCh] = 0.01;
+ }
for (Int_t iSt = 0; iSt < 5; iSt++) fRequestStation[iSt] = kTRUE;
fBypassSt45 = 0;
-
+ fMaxTriggerTracks = 100;
+ fMaxTrackCandidates = 10000;
}
//_____________________________________________________________________________
{
/// Set reconstruction parameters for high flux environment
- fMostProbBendingMomentum = 2.;
- fMinBendingMomentum = 1.;
- fMaxBendingMomentum = 3000.;
+ SetNameTitle("High Flux","High Flux");
+ SetEventSpecie(AliRecoParam::kHighMult);
+ fMinBendingMomentum = 0.8;
+ fMaxBendingMomentum = 1.e10;
fMaxNonBendingSlope = 0.3;
fMaxBendingSlope = 0.4;
- fNonBendingVertexDispersion = 10.;
- fBendingVertexDispersion = 10.;
+ fSelectTrackOnSlope = kFALSE;
+ fNonBendingVertexDispersion = 70.;
+ fBendingVertexDispersion = 70.;
fMaxNonBendingDistanceToTrack = 1.;
fMaxBendingDistanceToTrack = 1.;
fSigmaCutForTracking = 6.;
fSigmaCutForImprovement = 5.;
- fSigmaCutForTrigger = 8.;
+ fSigmaCutForTrigger = 4.;
fStripCutForTrigger = 1.;
fMaxStripAreaForTrigger = 3.;
- fMaxNormChi2MatchTrigger = 16.;
+ fMaxNormChi2MatchTrigger = fSigmaCutForTrigger * fSigmaCutForTrigger;
fCombinedClusterTrackReco = kFALSE;
fTrackAllTracks = kTRUE;
fRecoverTracks = kTRUE;
fMakeMoreTrackCandidates = kFALSE;
fComplementTracks = kTRUE;
fImproveTracks = kTRUE;
+ fRemoveConnectedTracksInSt12 = kFALSE;
fUseSmoother = kTRUE;
- for (Int_t iCh = 0; iCh < 10; iCh++) fUseChamber[iCh] = kTRUE;
+ for (Int_t iCh = 0; iCh < 10; iCh++) {
+ fUseChamber[iCh] = kTRUE;
+ fDefaultNonBendingReso[iCh] = 0.144;
+ fDefaultBendingReso[iCh] = 0.01;
+ }
for (Int_t iSt = 0; iSt < 5; iSt++) fRequestStation[iSt] = kTRUE;
fBypassSt45 = 0;
-
+ fMaxTriggerTracks = 100;
+ fMaxTrackCandidates = 10000;
}
//_____________________________________________________________________________
{
/// Set reconstruction parameters for high flux environment
- fMostProbBendingMomentum = 2.;
- fMinBendingMomentum = 1.;
- fMaxBendingMomentum = 10000000.;
+ SetNameTitle("Cosmic","Cosmic");
+ SetEventSpecie(AliRecoParam::kCosmic);
+ fMinBendingMomentum = 0.8;
+ fMaxBendingMomentum = 1.e10;
fMaxNonBendingSlope = 0.3;
fMaxBendingSlope = 0.4;
- fNonBendingVertexDispersion = 10.;
- fBendingVertexDispersion = 10.;
- fMaxNonBendingDistanceToTrack = 10.;
- fMaxBendingDistanceToTrack = 10.;
- fSigmaCutForTracking = 20.;
- fSigmaCutForImprovement = 20.;
- fSigmaCutForTrigger = 8.;
- fMaxNormChi2MatchTrigger = 16.;
+ fSelectTrackOnSlope = kTRUE;
+ fNonBendingVertexDispersion = 170.;
+ fBendingVertexDispersion = 170.;
+ fMaxNonBendingDistanceToTrack = 1.;
+ fMaxBendingDistanceToTrack = 1.;
+ fSigmaCutForTracking = 7.;
+ fSigmaCutForImprovement = 6.;
+ fSigmaCutForTrigger = 4.;
+ fStripCutForTrigger = 1.5;
+ fMaxStripAreaForTrigger = 3.;
+ fMaxNormChi2MatchTrigger = fSigmaCutForTrigger * fSigmaCutForTrigger;
fPercentOfFullClusterInESD = 100.;
fCombinedClusterTrackReco = kFALSE;
fTrackAllTracks = kTRUE;
fMakeMoreTrackCandidates = kFALSE;
fComplementTracks = kTRUE;
fImproveTracks = kTRUE;
+ fRemoveConnectedTracksInSt12 = kTRUE;
fUseSmoother = kTRUE;
fSaveFullClusterInESD = kTRUE;
- for (Int_t iCh = 0; iCh < 10; iCh++) fUseChamber[iCh] = kTRUE;
- for (Int_t iSt = 0; iSt < 5; iSt++) fRequestStation[iSt] = kTRUE;
+ for (Int_t iCh = 0; iCh < 10; iCh++) {
+ fUseChamber[iCh] = kTRUE;
+ fDefaultNonBendingReso[iCh] = 0.4;
+ fDefaultBendingReso[iCh] = 0.4;
+ }
+ fRequestStation[0] = kTRUE;
+ fRequestStation[1] = kTRUE;
+ fRequestStation[2] = kTRUE;
+ fRequestStation[3] = kTRUE;
+ fRequestStation[4] = kTRUE;
fBypassSt45 = 0;
+ fPadGoodnessMask = 0x400BE80; // Ped Mean is Zero | Ped Mean Too Low | Ped Mean Too High | Ped Sigma Too Low | Ped Sigma Too High | Ped is missing | HV is missing | manu occupancy too high
+ fMaxTriggerTracks = 100;
+ fMaxTrackCandidates = 10000;
+ SetPedMeanLimits(20, 700);
+ SetManuOccupancyLimits(-1.,0.01); // reject manu above occ=1%
+
+ SetBuspatchOccupancyLimits(-1,0.05);
+ SetFractionOfBuspatchOutsideOccupancyLimit(0.10); // 10 %
+}
+
+
+//_____________________________________________________________________________
+void AliMUONRecoParam::SetCalibrationParam()
+{
+ /// Set (dummy) reconstruction parameters for calibration environment
+
+ SetNameTitle("Calibration","Calibration");
+ SetEventSpecie(AliRecoParam::kCalib);
+
+ fPedMeanLimits[0] = 5000;
+ fPedMeanLimits[1] = 0;
+
+ fPadGoodnessMask = 0x8C00; // Pedestal is missing | is too low | too high
+
+}
+
+//_____________________________________________________________________________
+UInt_t
+AliMUONRecoParam::RequestedStationMask() const
+{
+ /// Get the mask of the requested station, i.e. an integer where
+ /// bit n is set to one if the station n was requested
+
+ UInt_t m(0);
+
+ for ( Int_t i = 0; i < 5; ++i )
+ {
+ if ( RequestStation(i) ) m |= ( 1 << i );
+ }
+ return m;
}
//_____________________________________________________________________________
/// print reconstruction parameters
/// if option = FULL then print also unused parameters
- cout<<endl<<"\t------Reconstruction parameters------"<<endl;
+ cout<<endl<<"\t------MUON Reconstruction parameters ("<<GetName()<<")------"<<endl;
+
+ if (IsDefault()) cout<<"\t\t*** Parameters used by default ***"<<endl;
cout<<Form("Calibration mode = %s",fCalibrationMode.Data())<<endl;
cout<<Form("Clustering mode = %s",fClusteringMode.Data())<<endl;
if (fSaveFullClusterInESD) cout<<Form("Save all cluster info in ESD for %5.2f %% of events",fPercentOfFullClusterInESD)<<endl;
else cout<<"Save partial cluster info in ESD"<<endl;
+
+ cout<<"Selection of track candidates:"<<endl;
+ if (fSelectTrackOnSlope) cout<<Form("\t- Non-bending slope < %5.2f",fMaxNonBendingSlope)<<endl;
+ else cout<<"\t- Impact parameter < 3 * vertex dispersion in the non-bending direction"<<endl;
+ cout<<Form("\t- if B!=0: Bending momentum > %5.2f",fMinBendingMomentum)<<endl;
+ if (fSelectTrackOnSlope) cout<<Form("\t if B==0: Bending slope < %5.2f",fMaxBendingSlope)<<endl;
+ else cout<<"\t if B==0: Impact parameter < 3 * vertex dispersion in the bending direction"<<endl;
- cout<<Form("Most probable bending momentum (used only if B=0) = %5.2f",fMostProbBendingMomentum)<<endl;
-
- cout<<Form("Bending momentum range = [%5.2f,%5.2f]",fMinBendingMomentum,fMaxBendingMomentum)<<endl;
-
- cout<<Form("Maximum non bending slope = %5.2f",fMaxNonBendingSlope)<<endl;
-
- cout<<Form("Maximum bending slope (used only if B=0) = %5.2f",fMaxBendingSlope)<<endl;
-
- if (strstr(fTrackingMode,"ORIGINAL"))
- cout<<Form("Vertex dispertion = (%5.2f,%5.2f)",fNonBendingVertexDispersion,fBendingVertexDispersion)<<endl;
- else if (strstr(option,"FULL"))
- cout<<Form("Vertex dispertion (used for original tracking only) = (%5.2f,%5.2f)",fNonBendingVertexDispersion,fBendingVertexDispersion)<<endl;
+ cout<<Form("Vertex dispersion (used to estimate initial bending momentum resolution) = (%5.2f,%5.2f)",fNonBendingVertexDispersion,fBendingVertexDispersion)<<endl;
cout<<Form("Maximum distance to track = (%5.2f,%5.2f)",fMaxNonBendingDistanceToTrack,fMaxBendingDistanceToTrack)<<endl;
} else if (fImproveTracks)
cout<<Form("Try to improve the reconstructed tracks by removing bad clusters (sigma cut = %5.2f)",fSigmaCutForImprovement)<<endl;
+ if (fRemoveConnectedTracksInSt12) cout<<"Remove tracks sharing one cluster or more in any station"<<endl;
+ else cout<<"Remove tracks sharing one cluster or more in stations 3, 4 and 5"<<endl;
+
if (strstr(option,"FULL")) {
cout<<"Use smoother to compute final track parameters, etc, at each cluster (used for Kalman tracking only): ";
if (fUseSmoother) cout<<"ON"<<endl;
} while (++st < 5);
if (discardedSt) cout<<endl;
- cout << Form("Pad goodness policy mask is 0x%x",PadGoodnessMask()) << endl;
- cout << "Which means we reject pads having the condition = " <<
- AliMUONPadStatusMaker::AsCondition(PadGoodnessMask()).Data() << endl;
-
- cout << "The pad limits we are using are :" << endl;
-
- cout << Form("%5.0f <= HVSt12 <= %5.0f Volts",HVSt12LowLimit(),HVSt12HighLimit()) << endl;
- cout << Form("%5.0f <= HVSt345 <= %5.0f Volts",HVSt345LowLimit(),HVSt345HighLimit()) << endl;
- cout << Form("%7.2f <= Pedestal mean <= %7.2f",PedMeanLowLimit(),PedMeanHighLimit()) << endl;
- cout << Form("%7.2f <= Pedestal sigma <= %7.2f",PedSigmaLowLimit(),PedSigmaHighLimit()) << endl;
- cout << Form("%e <= Gain linear term <= %e",GainA1LowLimit(),GainA1HighLimit()) << endl;
- cout << Form("%e <= Gain quadratic term <= %e",GainA2LowLimit(),GainA2HighLimit()) << endl;
- cout << Form("%5.0f <= Gain threshold term <= %5.0f",GainThresLowLimit(),GainThresHighLimit()) << endl;
-
- cout<<"\t-------------------------------------"<<endl<<endl;
+ cout << Form("Pad goodness policy mask is 0x%x",PadGoodnessMask()) << endl;
+ cout << "Which means we reject pads having the condition = " <<
+ AliMUONPadStatusMaker::AsCondition(PadGoodnessMask()).Data() << endl;
+
+ cout << "The pad limits we are using are :" << endl;
+
+ cout << Form("%5.0f <= HVSt12 <= %5.0f Volts",HVSt12LowLimit(),HVSt12HighLimit()) << endl;
+ cout << Form("%5.0f <= HVSt345 <= %5.0f Volts",HVSt345LowLimit(),HVSt345HighLimit()) << endl;
+ cout << Form("%7.2f <= Pedestal mean <= %7.2f",PedMeanLowLimit(),PedMeanHighLimit()) << endl;
+ cout << Form("%7.2f <= Pedestal sigma <= %7.2f",PedSigmaLowLimit(),PedSigmaHighLimit()) << endl;
+ cout << Form("%e <= Gain linear term <= %e",GainA1LowLimit(),GainA1HighLimit()) << endl;
+ cout << Form("%e <= Gain quadratic term <= %e",GainA2LowLimit(),GainA2HighLimit()) << endl;
+ cout << Form("%5.0f <= Gain threshold term <= %5.0f",GainThresLowLimit(),GainThresHighLimit()) << endl;
+
+ cout << Form("And we cut on charge >= %7.2f x ( pedestal sigma ) ",ChargeSigmaCut()) << endl;
+
+ cout << "Occupancy limits are :" << endl;
+
+ cout << Form("%e <= Manu occupancy < %7.2f",ManuOccupancyLowLimit(),ManuOccupancyHighLimit()) << endl;
+ cout << Form("%e <= Buspatch occupancy < %7.2f",BuspatchOccupancyLowLimit(),BuspatchOccupancyHighLimit()) << endl;
+ cout << Form("%e <= DE occupancy < %7.2f",DEOccupancyLowLimit(),DEOccupancyHighLimit()) << endl;
+
+ cout << "'QAChecker' limits" << endl;
+ cout << Form("FractionOfBuspatchOutsideOccupancyLimit = %5.2f %%",FractionOfBuspatchOutsideOccupancyLimit()*100.0) << endl;
+ cout << Form("Event size limit = %5.2f KB/event (soft) and %5.2f KB/event (hard)",fEventSizeSoftLimit,fEventSizeHardLimit) << endl;
+ if ( fTokenLostLimit > 0 )
+ {
+ cout << Form("We tolerate up to %5.2f %% token lost errors per event",fTokenLostLimit) << endl;
+ }
+ else
+ {
+ cout << "We dot not tolerate any token lost error !" << endl;
+ }
+
+ cout << "chamber non bending resolution = |";
+ for (Int_t iCh = 0; iCh < 10; iCh++) cout << Form(" %6.3f |",fDefaultNonBendingReso[iCh]);
+ cout << endl;
+ cout << "chamber bending resolution = |";
+ for (Int_t iCh = 0; iCh < 10; iCh++) cout << Form(" %6.3f |",fDefaultBendingReso[iCh]);
+ cout << endl;
+ cout<<Form("maximum number of trigger tracks above which the tracking is cancelled = %d",fMaxTriggerTracks)<<endl;
+ cout<<Form("maximum number of track candidates above which the tracking is abandonned = %d",fMaxTrackCandidates)<<endl;
+
+ cout << Form("The average noise pad charge is assumed to be %7.2f fC",AverageNoisePadCharge()) << endl;
+ cout << Form("and clusters below %5.2f times this noise charge (i.e. %7.2f fC) are discarded",
+ ClusterChargeCut(),ClusterChargeCut()*AverageNoisePadCharge()) << endl;
+ cout << Form("Note that LowestPadCharge is then %7.2f fC",LowestPadCharge()) << endl;
+
+ if (TryRecover())
+ {
+ cout << "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" << endl;
+ cout << "!!! WILL TRY TO RECOVER CORRUPTED RAW DATA !!!" << endl;
+ cout << "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" << endl;
+ }
+ cout<<"\t-----------------------------------------------------"<<endl<<endl;
}
fHVSt345Limits[0]=1500;
fHVSt345Limits[1]=2000;
- fPedMeanLimits[0] = 50;
+ fPedMeanLimits[0] = 20;
fPedMeanLimits[1] = 1024;
- fPedSigmaLimits[0] = 0.1;
+ fPedSigmaLimits[0] = 0.6;
fPedSigmaLimits[1] = 100;
fGainA1Limits[0] = 0.1;
fGainThresLimits[0] = 0;
fGainThresLimits[1] = 4095;
- fPadGoodnessMask = 0x8080;
+ fPadGoodnessMask = 0x8080; // Ped is missing | HV is missing
+
+ fManuOccupancyLimits[0] = -1.0;
+ fManuOccupancyLimits[1] = 1.0;
+
+ fBuspatchOccupancyLimits[0] = 1E-6;
+ fBuspatchOccupancyLimits[1] = 1.0;
+
+ fDEOccupancyLimits[0] = -1.0;
+ fDEOccupancyLimits[1] = 1.0;
+
+ fMissingPadFractionLimit = -1; // DEPRECATED
+ fFractionOfBuspatchOutsideOccupancyLimit = 0.10; // 10 %
+
+ ChargeSigmaCut(4.0); // pad with charge < 4.0 x sigma will be removed (where sigma is the actual noise of that very pad, i.e. not the average)
+
+ AverageNoisePadCharge(0.22875); // 0.22875 coulombs ~ 1.5 ADC channels
+
+ ClusterChargeCut(2.0); // will cut cluster below 2.0 x LowestPadCharge()
+
+ SetEventSizeLimits(35.0,45.0);
+
+ SetTokenLostLimit(0.0);
+
+ fTryRecover = kFALSE;
+}
+
+
+//-----------------------------------------------------------------------
+TObjArray*
+AliMUONRecoParam::Create(const char* settings)
+{
+ /// Create pre-defined recoparam array, according to settings.
+ /// settings is case-insensitive.
+ ///
+ /// Currently defined are :
+ ///
+ /// "cosmics" :
+ /// Cosmic (default)
+ /// Calibration
+ /// "ppideal"
+ /// LowFlux (default)
+ /// Calibration
+ /// "ppreal"
+ /// LowFlux (modified to reconstruct real p-p data)
+ /// Calibration
+ /// "pprealsim"
+ /// LowFlux (modified to reconstruct realistic p-p simulation)
+ /// Calibration
+
+ AliMUONRecoParam* param(0x0);
+
+ AliRecoParam::EventSpecie_t defaultParam = AliRecoParam::kLowMult;
+
+ TString stype(settings);
+ stype.ToLower();
+
+ if ( stype == "cosmics" )
+ {
+ // set parameters for cosmic runs
+ param = AliMUONRecoParam::GetCosmicParam();
+ defaultParam = AliRecoParam::kCosmic;
+ }
+ else if ( stype == "ppideal" )
+ {
+ // set default lowFlux parameters
+ param = AliMUONRecoParam::GetLowFluxParam();
+ }
+ else if ( stype == "ppreal" || stype == "pprealsim" || stype == "pprealnofield" )
+ {
+ // common parameters for p-p data and realistic p-p simu
+ param = AliMUONRecoParam::GetLowFluxParam();
+ param->SaveFullClusterInESD(kTRUE, 100.);
+ for (Int_t iCh=0; iCh<10; iCh++)
+ {
+ param->SetDefaultNonBendingReso(iCh,0.4);
+ param->SetDefaultBendingReso(iCh,0.4);
+ }
+ param->SetSigmaCutForTracking(7.);
+ param->SetStripCutForTrigger(1.5);
+ param->SetSigmaCutForTrigger(6.);
+ param->ImproveTracks(kTRUE, 6.);
+ param->SetPedMeanLimits(20, 700);
+ param->SetManuOccupancyLimits(-1.,0.01);
+ param->SetBuspatchOccupancyLimits(-1.,0.01);
+ param->SetFractionOfBuspatchOutsideOccupancyLimit(0.05); // 5 %
+
+ // specific parameters for p-p data or realistic p-p simu
+ if ( stype == "ppreal" || stype == "pprealnofield" )
+ {
+ param->SetPadGoodnessMask(0x400BE80);
+ }
+ else
+ {
+ param->SetPadGoodnessMask(0x8080);
+ }
+
+ if ( stype == "pprealnofield" )
+ {
+ param->TryRecover(kTRUE);
+ }
+ }
+ else
+ {
+ AliErrorClass("Unknown settings !");
+ return 0x0;
+ }
+
+ TObjArray* recoParams = new TObjArray;
+
+ recoParams->AddLast(param);
+
+ // set (dummy) parameters for calibration runs
+ param = AliMUONRecoParam::GetCalibrationParam();
+ recoParams->AddLast(param);
+
+ // set parameters for Pb-Pb runs
+ // param = AliMUONRecoParam::GetHighFluxParam();
+ // recoParams.AddLast(param);
+
+ // identify default parameters (exit if identification failed)
+ Bool_t defaultIsSet = kFALSE;
+ TIter next(recoParams);
+ while ( (param = static_cast<AliMUONRecoParam*>(next())) )
+ {
+ if (param->GetEventSpecie() == defaultParam)
+ {
+ param->SetAsDefault();
+ defaultIsSet = kTRUE;
+ }
+ param->Print("FULL");
+ }
+
+ if (!defaultIsSet)
+ {
+ AliErrorClass("The default reconstruction parameters are not set! Exiting...");
+ return 0x0;
+ }
+
+ return recoParams;
}
+//______________________________________________________________________________
+void
+AliMUONRecoParam::Show(Int_t runNumber, const char* ocdb)
+{
+ /// Show what we have in the designated OCDB for that run, as far as RecoParams are concerned
+
+ AliCDBManager::Instance()->SetDefaultStorage(ocdb);
+ AliCDBManager::Instance()->SetRun(runNumber);
+
+ AliCDBEntry* entry = AliCDBManager::Instance()->Get("MUON/Calib/RecoParam");
+
+ if (!entry) return;
+
+ TObject* o = entry->GetObject();
+
+ if ( o->IsA() == TObjArray::Class() )
+ {
+ TObjArray* array = static_cast<TObjArray*>(o);
+ for ( Int_t i = 0; i <= array->GetLast(); ++i )
+ {
+ AliDetectorRecoParam* p = static_cast<AliDetectorRecoParam*>(array->At(i));
+ cout << Form("array[%d]=%s %s %s",i,
+ p ? p->ClassName() : "",
+ p ? AliRecoParam::GetEventSpecieName(AliRecoParam::Convert(p->GetEventSpecie())) :"",
+ p ? ( p->IsDefault() ? "default" : "") : "" ) << endl;
+ }
+ cout << "=========== dumps below ====== " << endl;
+
+ for ( Int_t i = 0; i <= array->GetLast(); ++i )
+ {
+ AliDetectorRecoParam* p = static_cast<AliDetectorRecoParam*>(array->At(i));
+ if ( p ) p->Print("");
+ }
+ }
+ else
+ {
+ o->Print();
+ }
+}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff