* about the suitability of this software for any purpose. It is *
* provided "as is" without express or implied warranty. *
**************************************************************************/
-
/* $Id$ */
+/* History of cvs commits:
+ *
+ * $Log$
+ * Revision 1.94 2007/10/18 08:40:02 kharlov
+ * Misalignment-related bug fixed
+ *
+ * Revision 1.93 2007/10/06 22:24:40 kharlov
+ * Bug in strip unit geometry is corrected
+ *
+ * Revision 1.92 2007/07/04 16:38:19 policheh
+ * Tracking2LocalCS matrices corrected for CPV.
+ *
+ * Revision 1.91 2007/07/02 14:50:49 policheh
+ * Tracking2LocalCS matrices corrected.
+ *
+ * Revision 1.90 2007/05/24 13:04:05 policheh
+ * AddAlignableVolumes: local to tracking CS transformation matrices creates for each
+ * PHOS supermodule
+ *
+ * Revision 1.89 2007/04/24 14:34:39 hristov
+ * Additional protection: do not search for alignable object if the CPV is not in the geometry
+ *
+ * Revision 1.88 2007/04/19 15:28:30 kharlov
+ * Modify strip unit geometry according to the final drawings (Timur)
+ *
+ * Revision 1.87 2007/04/01 07:37:10 kharlov
+ * TGeo RS to Local RS transf matr added
+ *
+ * Revision 1.86 2007/03/06 06:55:46 kharlov
+ * DP:Misalignment of CPV added
+ *
+ * Revision 1.85 2007/03/01 11:37:37 kharlov
+ * Strip units changed from 8x1 to 8x2 (T.Pocheptsov)
+ *
+ * Revision 1.84 2006/12/20 16:56:43 kharlov
+ * Optional geometry without CPV
+ *
+ * Revision 1.83 2006/11/14 17:11:15 hristov
+ * Removing inheritances from TAttLine, TAttMarker and AliRndm in AliModule. The copy constructor and assignment operators are moved to the private part of the class and not implemented. The corresponding changes are propagated to the detectors
+ *
+ * Revision 1.82 2006/09/27 19:55:57 kharlov
+ * Alignment object with symbolic volume names are introduced
+ *
+ * Revision 1.81 2006/03/04 20:25:56 kharlov
+ * Set geom parameters from CDB
+ *
+ * Revision 1.80 2005/06/17 07:39:07 hristov
+ * Removing GetDebug and SetDebug from AliRun and AliModule. Using AliLog for the messages
+ *
+ * Revision 1.79 2005/05/28 14:19:05 schutz
+ * Compilation warnings fixed by T.P.
+ *
+ */
+
//_________________________________________________________________________
// Implementation version v0 of PHOS Manager class
-// Layout EMC + PPSD has name GPS2
// An object of this class does not produce hits nor digits
// It is the one to use if you do not want to produce outputs in TREEH or TREED
//
-//*-- Author: Yves Schutz (SUBATECH)
+//*-- Author: Yves Schutz (SUBATECH) & Dmitri Peressounko (RRC KI & SUBATECH)
// --- ROOT system ---
-#include "TBRIK.h"
-#include "TNode.h"
-#include "TRandom.h"
-#include "TGeometry.h"
-
+#include <TFolder.h>
+#include <TGeometry.h>
+#include <TROOT.h>
+#include <TRandom.h>
+#include <TTree.h>
+#include <TVirtualMC.h>
+#include <TGeoPhysicalNode.h>
+#include <TGeoManager.h>
+#include <TGeoMatrix.h>
+#include <TVector3.h>
// --- Standard library ---
-#include <stdio.h>
#include <string.h>
#include <stdlib.h>
-#include <strstream.h>
// --- AliRoot header files ---
+#include "AliConst.h"
+#include "AliPHOSGeometry.h"
+#include "AliPHOSLoader.h"
#include "AliPHOSv0.h"
#include "AliRun.h"
-#include "AliConst.h"
-#include "AliMC.h"
+#include "AliLog.h"
+#include "AliGeomManager.h"
ClassImp(AliPHOSv0)
AliPHOS(name,title)
{
// ctor : title is used to identify the layout
- // GPS2 = 5 modules (EMC + PPSD)
-
- // gets an instance of the geometry parameters class
-
- if (strcmp(GetTitle(),"") != 0 )
- fGeom = AliPHOSGeometry::GetInstance(GetTitle(), "") ;
-
-}
-
-//____________________________________________________________________________
-void AliPHOSv0::BuildGeometry()
-{
- // Build the PHOS geometry for the ROOT display
- //BEGIN_HTML
- /*
- <H2>
- PHOS in ALICE displayed by root
- </H2>
- <UL>
- <LI> All Views
- <P>
- <CENTER>
- <IMG Align=BOTTOM ALT="All Views" SRC="../images/AliPHOSv0AllViews.gif">
- </CENTER></P></LI>
- <LI> Front View
- <P>
- <CENTER>
- <IMG Align=BOTTOM ALT="Front View" SRC="../images/AliPHOSv0FrontView.gif">
- </CENTER></P></LI>
- <LI> 3D View 1
- <P>
- <CENTER>
- <IMG Align=BOTTOM ALT="3D View 1" SRC="../images/AliPHOSv03DView1.gif">
- </CENTER></P></LI>
- <LI> 3D View 2
- <P>
- <CENTER>
- <IMG Align=BOTTOM ALT="3D View 2" SRC="../images/AliPHOSv03DView2.gif">
- </CENTER></P></LI>
- </UL>
- */
- //END_HTML
-
- this->BuildGeometryforPHOS() ;
- if ( ( strcmp(fGeom->GetName(), "GPS2" ) == 0 ) )
- this->BuildGeometryforPPSD() ;
- else if ( ( strcmp(fGeom->GetName(), "IHEP" ) == 0 ) )
- this->BuildGeometryforCPV() ;
- else
- cout << "AliPHOSv0::BuildGeometry : no charged particle identification system installed" << endl;
-
-}
-
-//____________________________________________________________________________
-void AliPHOSv0:: BuildGeometryforPHOS(void)
-{
- // Build the PHOS-EMC geometry for the ROOT display
-
- const Int_t kColorPHOS = kRed ;
- const Int_t kColorXTAL = kBlue ;
-
- Double_t const kRADDEG = 180.0 / kPI ;
-
- new TBRIK( "OuterBox", "PHOS box", "void", fGeom->GetOuterBoxSize(0)/2,
- fGeom->GetOuterBoxSize(1)/2,
- fGeom->GetOuterBoxSize(2)/2 );
-
- // Textolit Wall box, position inside PHOS
-
- new TBRIK( "TextolitBox", "PHOS Textolit box ", "void", fGeom->GetTextolitBoxSize(0)/2,
- fGeom->GetTextolitBoxSize(1)/2,
- fGeom->GetTextolitBoxSize(2)/2);
-
- // Polystyrene Foam Plate
-
- new TBRIK( "UpperFoamPlate", "PHOS Upper foam plate", "void", fGeom->GetTextolitBoxSize(0)/2,
- fGeom->GetSecondUpperPlateThickness()/2,
- fGeom->GetTextolitBoxSize(2)/2 ) ;
-
- // Air Filled Box
-
- new TBRIK( "AirFilledBox", "PHOS air filled box", "void", fGeom->GetAirFilledBoxSize(0)/2,
- fGeom->GetAirFilledBoxSize(1)/2,
- fGeom->GetAirFilledBoxSize(2)/2 );
-
- // Crystals Box
-
- Float_t xtlX = fGeom->GetCrystalSize(0) ;
- Float_t xtlY = fGeom->GetCrystalSize(1) ;
- Float_t xtlZ = fGeom->GetCrystalSize(2) ;
-
- Float_t xl = fGeom->GetNPhi() * ( xtlX + 2 * fGeom->GetGapBetweenCrystals() ) / 2.0 + fGeom->GetModuleBoxThickness() ;
- Float_t yl = ( xtlY + fGeom->GetCrystalSupportHeight() + fGeom->GetCrystalWrapThickness() + fGeom->GetCrystalHolderThickness() ) / 2.0
- + fGeom->GetModuleBoxThickness() / 2.0 ;
- Float_t zl = fGeom->GetNZ() * ( xtlZ + 2 * fGeom->GetGapBetweenCrystals() ) / 2.0 + fGeom->GetModuleBoxThickness() ;
-
- new TBRIK( "CrystalsBox", "PHOS crystals box", "void", xl, yl, zl ) ;
-
-// position PHOS into ALICE
-
- Float_t r = fGeom->GetIPtoOuterCoverDistance() + fGeom->GetOuterBoxSize(1) / 2.0 ;
- Int_t number = 988 ;
- Float_t pphi = TMath::ATan( fGeom->GetOuterBoxSize(0) / ( 2.0 * fGeom->GetIPtoOuterCoverDistance() ) ) ;
- pphi *= kRADDEG ;
- TNode * top = gAlice->GetGeometry()->GetNode("alice") ;
-
- char * nodename = new char[20] ;
- char * rotname = new char[20] ;
-
- for( Int_t i = 1; i <= fGeom->GetNModules(); i++ ) {
- Float_t angle = pphi * 2 * ( i - fGeom->GetNModules() / 2.0 - 0.5 ) ;
- sprintf(rotname, "%s%d", "rot", number++) ;
- new TRotMatrix(rotname, rotname, 90, angle, 90, 90 + angle, 0, 0);
- top->cd();
- sprintf(nodename,"%s%d", "Module", i) ;
- Float_t x = r * TMath::Sin( angle / kRADDEG ) ;
- Float_t y = -r * TMath::Cos( angle / kRADDEG ) ;
- TNode * outerboxnode = new TNode(nodename, nodename, "OuterBox", x, y, 0, rotname ) ;
- outerboxnode->SetLineColor(kColorPHOS) ;
- fNodes->Add(outerboxnode) ;
- outerboxnode->cd() ;
- // now inside the outer box the textolit box
- y = ( fGeom->GetOuterBoxThickness(1) - fGeom->GetUpperPlateThickness() ) / 2. ;
- sprintf(nodename,"%s%d", "TexBox", i) ;
- TNode * textolitboxnode = new TNode(nodename, nodename, "TextolitBox", 0, y, 0) ;
- textolitboxnode->SetLineColor(kColorPHOS) ;
- fNodes->Add(textolitboxnode) ;
- // upper foam plate inside outre box
- outerboxnode->cd() ;
- sprintf(nodename, "%s%d", "UFPlate", i) ;
- y = ( fGeom->GetTextolitBoxSize(1) - fGeom->GetSecondUpperPlateThickness() ) / 2.0 ;
- TNode * upperfoamplatenode = new TNode(nodename, nodename, "UpperFoamPlate", 0, y, 0) ;
- upperfoamplatenode->SetLineColor(kColorPHOS) ;
- fNodes->Add(upperfoamplatenode) ;
- // air filled box inside textolit box (not drawn)
- textolitboxnode->cd();
- y = ( fGeom->GetTextolitBoxSize(1) - fGeom->GetAirFilledBoxSize(1) ) / 2.0 - fGeom->GetSecondUpperPlateThickness() ;
- sprintf(nodename, "%s%d", "AFBox", i) ;
- TNode * airfilledboxnode = new TNode(nodename, nodename, "AirFilledBox", 0, y, 0) ;
- fNodes->Add(airfilledboxnode) ;
- // crystals box inside air filled box
- airfilledboxnode->cd() ;
- y = fGeom->GetAirFilledBoxSize(1) / 2.0 - yl
- - ( fGeom->GetIPtoCrystalSurface() - fGeom->GetIPtoOuterCoverDistance() - fGeom->GetModuleBoxThickness()
- - fGeom->GetUpperPlateThickness() - fGeom->GetSecondUpperPlateThickness() ) ;
- sprintf(nodename, "%s%d", "XTBox", i) ;
- TNode * crystalsboxnode = new TNode(nodename, nodename, "CrystalsBox", 0, y, 0) ;
- crystalsboxnode->SetLineColor(kColorXTAL) ;
- fNodes->Add(crystalsboxnode) ;
- }
-
- delete[] rotname ;
- delete[] nodename ;
-}
-
-//____________________________________________________________________________
-void AliPHOSv0:: BuildGeometryforPPSD(void)
-{
- // Build the PHOS-PPSD geometry for the ROOT display
- //BEGIN_HTML
- /*
- <H2>
- PPSD displayed by root
- </H2>
- <UL>
- <LI> Zoom on PPSD: Front View
- <P>
- <CENTER>
- <IMG Align=BOTTOM ALT="PPSD Front View" SRC="../images/AliPHOSv0PPSDFrontView.gif">
- </CENTER></P></LI>
- <LI> Zoom on PPSD: Perspective View
- <P>
- <CENTER>
- <IMG Align=BOTTOM ALT="PPSD Prespective View" SRC="../images/AliPHOSv0PPSDPerspectiveView.gif">
- </CENTER></P></LI>
- </UL>
- */
- //END_HTML
- Double_t const kRADDEG = 180.0 / kPI ;
-
- const Int_t kColorPHOS = kRed ;
- const Int_t kColorPPSD = kGreen ;
- const Int_t kColorGas = kBlue ;
- const Int_t kColorAir = kYellow ;
-
- // Box for a full PHOS module
-
- new TBRIK( "PPSDBox", "PPSD box", "void", fGeom->GetCPVBoxSize(0)/2,
- fGeom->GetCPVBoxSize(1)/2,
- fGeom->GetCPVBoxSize(2)/2 );
-
- // Box containing one micromegas module
-
- new TBRIK( "PPSDModule", "PPSD module", "void", fGeom->GetPPSDModuleSize(0)/2,
- fGeom->GetPPSDModuleSize(1)/2,
- fGeom->GetPPSDModuleSize(2)/2 );
- // top lid
-
- new TBRIK ( "TopLid", "Micromegas top lid", "void", fGeom->GetPPSDModuleSize(0)/2,
- fGeom->GetLidThickness()/2,
- fGeom->GetPPSDModuleSize(2)/2 ) ;
- // composite panel (top and bottom)
-
- new TBRIK ( "TopPanel", "Composite top panel", "void", ( fGeom->GetPPSDModuleSize(0) - fGeom->GetMicromegasWallThickness() )/2,
- fGeom->GetCompositeThickness()/2,
- ( fGeom->GetPPSDModuleSize(2) - fGeom->GetMicromegasWallThickness() )/2 ) ;
-
- new TBRIK ( "BottomPanel", "Composite bottom panel", "void", ( fGeom->GetPPSDModuleSize(0) - fGeom->GetMicromegasWallThickness() )/2,
- fGeom->GetCompositeThickness()/2,
- ( fGeom->GetPPSDModuleSize(2) - fGeom->GetMicromegasWallThickness() )/2 ) ;
- // gas gap (conversion and avalanche)
-
- new TBRIK ( "GasGap", "gas gap", "void", ( fGeom->GetPPSDModuleSize(0) - fGeom->GetMicromegasWallThickness() )/2,
- ( fGeom->GetConversionGap() + fGeom->GetAvalancheGap() )/2,
- ( fGeom->GetPPSDModuleSize(2) - fGeom->GetMicromegasWallThickness() )/2 ) ;
-
- // anode and cathode
-
- new TBRIK ( "Anode", "Anode", "void", ( fGeom->GetPPSDModuleSize(0) - fGeom->GetMicromegasWallThickness() )/2,
- fGeom->GetAnodeThickness()/2,
- ( fGeom->GetPPSDModuleSize(2) - fGeom->GetMicromegasWallThickness() )/2 ) ;
-
- new TBRIK ( "Cathode", "Cathode", "void", ( fGeom->GetPPSDModuleSize(0) - fGeom->GetMicromegasWallThickness() )/2,
- fGeom->GetCathodeThickness()/2,
- ( fGeom->GetPPSDModuleSize(2) - fGeom->GetMicromegasWallThickness() )/2 ) ;
- // PC
-
- new TBRIK ( "PCBoard", "Printed Circuit", "void", ( fGeom->GetPPSDModuleSize(0) - fGeom->GetMicromegasWallThickness() )/2,
- fGeom->GetPCThickness()/2,
- ( fGeom->GetPPSDModuleSize(2) - fGeom->GetMicromegasWallThickness() )/2 ) ;
- // Gap between Lead and top micromegas
-
- new TBRIK ( "LeadToM", "Air Gap top", "void", fGeom->GetCPVBoxSize(0)/2,
- fGeom->GetMicro1ToLeadGap()/2,
- fGeom->GetCPVBoxSize(2)/2 ) ;
-
-// Gap between Lead and bottom micromegas
-
- new TBRIK ( "MToLead", "Air Gap bottom", "void", fGeom->GetCPVBoxSize(0)/2,
- fGeom->GetLeadToMicro2Gap()/2,
- fGeom->GetCPVBoxSize(2)/2 ) ;
- // Lead converter
-
- new TBRIK ( "Lead", "Lead converter", "void", fGeom->GetCPVBoxSize(0)/2,
- fGeom->GetLeadConverterThickness()/2,
- fGeom->GetCPVBoxSize(2)/2 ) ;
-
- // position PPSD into ALICE
-
- char * nodename = new char[20] ;
- char * rotname = new char[20] ;
-
- Float_t r = fGeom->GetIPtoTopLidDistance() + fGeom->GetCPVBoxSize(1) / 2.0 ;
- Int_t number = 988 ;
- TNode * top = gAlice->GetGeometry()->GetNode("alice") ;
-
- for( Int_t i = 1; i <= fGeom->GetNModules(); i++ ) { // the number of PHOS modules
- Float_t angle = fGeom->GetPHOSAngle(i) ;
- sprintf(rotname, "%s%d", "rotg", number++) ;
- new TRotMatrix(rotname, rotname, 90, angle, 90, 90 + angle, 0, 0);
- top->cd();
- sprintf(nodename, "%s%d", "Moduleg", i) ;
- Float_t x = r * TMath::Sin( angle / kRADDEG ) ;
- Float_t y = -r * TMath::Cos( angle / kRADDEG ) ;
- TNode * ppsdboxnode = new TNode(nodename , nodename ,"PPSDBox", x, y, 0, rotname ) ;
- ppsdboxnode->SetLineColor(kColorPPSD) ;
- fNodes->Add(ppsdboxnode) ;
- ppsdboxnode->cd() ;
- // inside the PPSD box:
- // 1. fNumberOfModulesPhi x fNumberOfModulesZ top micromegas
- x = ( fGeom->GetCPVBoxSize(0) - fGeom->GetPPSDModuleSize(0) ) / 2. ;
- {
- for ( Int_t iphi = 1; iphi <= fGeom->GetNumberOfModulesPhi(); iphi++ ) { // the number of micromegas modules in phi per PHOS module
- Float_t z = ( fGeom->GetCPVBoxSize(2) - fGeom->GetPPSDModuleSize(2) ) / 2. ;
- TNode * micro1node ;
- for ( Int_t iz = 1; iz <= fGeom->GetNumberOfModulesZ(); iz++ ) { // the number of micromegas modules in z per PHOS module
- y = ( fGeom->GetCPVBoxSize(1) - fGeom->GetMicromegas1Thickness() ) / 2. ;
- sprintf(nodename, "%s%d%d%d", "Mic1", i, iphi, iz) ;
- micro1node = new TNode(nodename, nodename, "PPSDModule", x, y, z) ;
- micro1node->SetLineColor(kColorPPSD) ;
- fNodes->Add(micro1node) ;
- // inside top micromegas
- micro1node->cd() ;
- // a. top lid
- y = ( fGeom->GetMicromegas1Thickness() - fGeom->GetLidThickness() ) / 2. ;
- sprintf(nodename, "%s%d%d%d", "Lid", i, iphi, iz) ;
- TNode * toplidnode = new TNode(nodename, nodename, "TopLid", 0, y, 0) ;
- toplidnode->SetLineColor(kColorPPSD) ;
- fNodes->Add(toplidnode) ;
- // b. composite panel
- y = y - fGeom->GetLidThickness() / 2. - fGeom->GetCompositeThickness() / 2. ;
- sprintf(nodename, "%s%d%d%d", "CompU", i, iphi, iz) ;
- TNode * compupnode = new TNode(nodename, nodename, "TopPanel", 0, y, 0) ;
- compupnode->SetLineColor(kColorPPSD) ;
- fNodes->Add(compupnode) ;
- // c. anode
- y = y - fGeom->GetCompositeThickness() / 2. - fGeom->GetAnodeThickness() / 2. ;
- sprintf(nodename, "%s%d%d%d", "Ano", i, iphi, iz) ;
- TNode * anodenode = new TNode(nodename, nodename, "Anode", 0, y, 0) ;
- anodenode->SetLineColor(kColorPHOS) ;
- fNodes->Add(anodenode) ;
- // d. gas
- y = y - fGeom->GetAnodeThickness() / 2. - ( fGeom->GetConversionGap() + fGeom->GetAvalancheGap() ) / 2. ;
- sprintf(nodename, "%s%d%d%d", "GGap", i, iphi, iz) ;
- TNode * ggapnode = new TNode(nodename, nodename, "GasGap", 0, y, 0) ;
- ggapnode->SetLineColor(kColorGas) ;
- fNodes->Add(ggapnode) ;
- // f. cathode
- y = y - ( fGeom->GetConversionGap() + fGeom->GetAvalancheGap() ) / 2. - fGeom->GetCathodeThickness() / 2. ;
- sprintf(nodename, "%s%d%d%d", "Cathode", i, iphi, iz) ;
- TNode * cathodenode = new TNode(nodename, nodename, "Cathode", 0, y, 0) ;
- cathodenode->SetLineColor(kColorPHOS) ;
- fNodes->Add(cathodenode) ;
- // g. printed circuit
- y = y - fGeom->GetCathodeThickness() / 2. - fGeom->GetPCThickness() / 2. ;
- sprintf(nodename, "%s%d%d%d", "PC", i, iphi, iz) ;
- TNode * pcnode = new TNode(nodename, nodename, "PCBoard", 0, y, 0) ;
- pcnode->SetLineColor(kColorPPSD) ;
- fNodes->Add(pcnode) ;
- // h. composite panel
- y = y - fGeom->GetPCThickness() / 2. - fGeom->GetCompositeThickness() / 2. ;
- sprintf(nodename, "%s%d%d%d", "CompDown", i, iphi, iz) ;
- TNode * compdownnode = new TNode(nodename, nodename, "BottomPanel", 0, y, 0) ;
- compdownnode->SetLineColor(kColorPPSD) ;
- fNodes->Add(compdownnode) ;
- z = z - fGeom->GetPPSDModuleSize(2) ;
- ppsdboxnode->cd() ;
- } // end of Z module loop
- x = x - fGeom->GetPPSDModuleSize(0) ;
- ppsdboxnode->cd() ;
- } // end of phi module loop
- }
- // 2. air gap
- ppsdboxnode->cd() ;
- y = ( fGeom->GetCPVBoxSize(1) - 2 * fGeom->GetMicromegas1Thickness() - fGeom->GetMicro1ToLeadGap() ) / 2. ;
- sprintf(nodename, "%s%d", "GapUp", i) ;
- TNode * gapupnode = new TNode(nodename, nodename, "LeadToM", 0, y, 0) ;
- gapupnode->SetLineColor(kColorAir) ;
- fNodes->Add(gapupnode) ;
- // 3. lead converter
- y = y - fGeom->GetMicro1ToLeadGap() / 2. - fGeom->GetLeadConverterThickness() / 2. ;
- sprintf(nodename, "%s%d", "LeadC", i) ;
- TNode * leadcnode = new TNode(nodename, nodename, "Lead", 0, y, 0) ;
- leadcnode->SetLineColor(kColorPPSD) ;
- fNodes->Add(leadcnode) ;
- // 4. air gap
- y = y - fGeom->GetLeadConverterThickness() / 2. - fGeom->GetLeadToMicro2Gap() / 2. ;
- sprintf(nodename, "%s%d", "GapDown", i) ;
- TNode * gapdownnode = new TNode(nodename, nodename, "MToLead", 0, y, 0) ;
- gapdownnode->SetLineColor(kColorAir) ;
- fNodes->Add(gapdownnode) ;
- // 5. fNumberOfModulesPhi x fNumberOfModulesZ bottom micromegas
- x = ( fGeom->GetCPVBoxSize(0) - fGeom->GetPPSDModuleSize(0) ) / 2. - fGeom->GetPhiDisplacement() ;
- {
- for ( Int_t iphi = 1; iphi <= fGeom->GetNumberOfModulesPhi(); iphi++ ) {
- Float_t z = ( fGeom->GetCPVBoxSize(2) - fGeom->GetPPSDModuleSize(2) ) / 2. - fGeom->GetZDisplacement() ;;
- TNode * micro2node ;
- for ( Int_t iz = 1; iz <= fGeom->GetNumberOfModulesZ(); iz++ ) {
- y = - ( fGeom->GetCPVBoxSize(1) - fGeom->GetMicromegas2Thickness() ) / 2. ;
- sprintf(nodename, "%s%d%d%d", "Mic2", i, iphi, iz) ;
- micro2node = new TNode(nodename, nodename, "PPSDModule", x, y, z) ;
- micro2node->SetLineColor(kColorPPSD) ;
- fNodes->Add(micro2node) ;
- // inside bottom micromegas
- micro2node->cd() ;
- // a. top lid
- y = ( fGeom->GetMicromegas2Thickness() - fGeom->GetLidThickness() ) / 2. ;
- sprintf(nodename, "%s%d", "Lidb", i) ;
- TNode * toplidbnode = new TNode(nodename, nodename, "TopLid", 0, y, 0) ;
- toplidbnode->SetLineColor(kColorPPSD) ;
- fNodes->Add(toplidbnode) ;
- // b. composite panel
- y = y - fGeom->GetLidThickness() / 2. - fGeom->GetCompositeThickness() / 2. ;
- sprintf(nodename, "%s%d", "CompUb", i) ;
- TNode * compupbnode = new TNode(nodename, nodename, "TopPanel", 0, y, 0) ;
- compupbnode->SetLineColor(kColorPPSD) ;
- fNodes->Add(compupbnode) ;
- // c. anode
- y = y - fGeom->GetCompositeThickness() / 2. - fGeom->GetAnodeThickness() / 2. ;
- sprintf(nodename, "%s%d", "Anob", i) ;
- TNode * anodebnode = new TNode(nodename, nodename, "Anode", 0, y, 0) ;
- anodebnode->SetLineColor(kColorPPSD) ;
- fNodes->Add(anodebnode) ;
- // d. conversion gas
- y = y - fGeom->GetAnodeThickness() / 2. - ( fGeom->GetConversionGap() + fGeom->GetAvalancheGap() ) / 2. ;
- sprintf(nodename, "%s%d", "GGapb", i) ;
- TNode * ggapbnode = new TNode(nodename, nodename, "GasGap", 0, y, 0) ;
- ggapbnode->SetLineColor(kColorGas) ;
- fNodes->Add(ggapbnode) ;
- // f. cathode
- y = y - ( fGeom->GetConversionGap() + fGeom->GetAvalancheGap() ) / 2. - fGeom->GetCathodeThickness() / 2. ;
- sprintf(nodename, "%s%d", "Cathodeb", i) ;
- TNode * cathodebnode = new TNode(nodename, nodename, "Cathode", 0, y, 0) ;
- cathodebnode->SetLineColor(kColorPPSD) ;
- fNodes->Add(cathodebnode) ;
- // g. printed circuit
- y = y - fGeom->GetCathodeThickness() / 2. - fGeom->GetPCThickness() / 2. ;
- sprintf(nodename, "%s%d", "PCb", i) ;
- TNode * pcbnode = new TNode(nodename, nodename, "PCBoard", 0, y, 0) ;
- pcbnode->SetLineColor(kColorPPSD) ;
- fNodes->Add(pcbnode) ;
- // h. composite pane
- y = y - fGeom->GetPCThickness() / 2. - fGeom->GetCompositeThickness() / 2. ;
- sprintf(nodename, "%s%d", "CompDownb", i) ;
- TNode * compdownbnode = new TNode(nodename, nodename, "BottomPanel", 0, y, 0) ;
- compdownbnode->SetLineColor(kColorPPSD) ;
- fNodes->Add(compdownbnode) ;
- z = z - fGeom->GetPPSDModuleSize(2) ;
- ppsdboxnode->cd() ;
- } // end of Z module loop
- x = x - fGeom->GetPPSDModuleSize(0) ;
- ppsdboxnode->cd() ;
- } // end of phi module loop
- }
- } // PHOS modules
-
- delete[] rotname ;
- delete[] nodename ;
-
-}
-
-//____________________________________________________________________________
-void AliPHOSv0:: BuildGeometryforCPV(void)
-{
- // Build the PHOS-CPV geometry for the ROOT display
- // Author: Yuri Kharlov 11 September 2000
- //
- //BEGIN_HTML
- /*
- <H2>
- CPV displayed by root
- </H2>
- <table width=700>
-
- <tr>
- <td>CPV perspective view</td>
- <td>CPV front view </td>
- </tr>
-
- <tr>
- <td> <img height=300 width=290 src="../images/CPVRootPersp.gif"> </td>
- <td> <img height=300 width=290 src="../images/CPVRootFront.gif"> </td>
- </tr>
-
- </table>
-
- */
- //END_HTML
-
- const Double_t kRADDEG = 180.0 / kPI ;
- const Int_t kColorCPV = kGreen ;
- const Int_t kColorFrame = kYellow ;
- const Int_t kColorGassiplex = kRed;
- const Int_t kColorPCB = kCyan;
-
- // Box for a full PHOS module
-
- new TBRIK ("CPVBox", "CPV box", "void", fGeom->GetCPVBoxSize(0)/2,
- fGeom->GetCPVBoxSize(1)/2,
- fGeom->GetCPVBoxSize(2)/2 );
- new TBRIK ("CPVFrameLR", "CPV frame Left-Right", "void", fGeom->GetCPVFrameSize(0)/2,
- fGeom->GetCPVFrameSize(1)/2,
- fGeom->GetCPVBoxSize(2)/2 );
- new TBRIK ("CPVFrameUD", "CPV frame Up-Down", "void", fGeom->GetCPVBoxSize(0)/2 - fGeom->GetCPVFrameSize(0),
- fGeom->GetCPVFrameSize(1)/2,
- fGeom->GetCPVFrameSize(2)/2);
- new TBRIK ("CPVPCB", "CPV PCB", "void", fGeom->GetCPVActiveSize(0)/2,
- fGeom->GetCPVTextoliteThickness()/2,
- fGeom->GetCPVActiveSize(1)/2);
- new TBRIK ("CPVGassiplex", "CPV Gassiplex PCB", "void", fGeom->GetGassiplexChipSize(0)/2,
- fGeom->GetGassiplexChipSize(1)/2,
- fGeom->GetGassiplexChipSize(2)/2);
-
- // position CPV into ALICE
-
- char * nodename = new char[25] ;
- char * rotname = new char[25] ;
-
- Float_t r = fGeom->GetIPtoCPVDistance() + fGeom->GetCPVBoxSize(1) / 2.0 ;
- Int_t number = 988 ;
- TNode * top = gAlice->GetGeometry()->GetNode("alice") ;
- for( Int_t i = 1; i <= fGeom->GetNModules(); i++ ) { // the number of PHOS modules
-
- // One CPV module
-
- Float_t angle = fGeom->GetPHOSAngle(i) ;
- sprintf(rotname, "%s%d", "rotg", number++) ;
- new TRotMatrix(rotname, rotname, 90, angle, 90, 90 + angle, 0, 0);
- top->cd();
- sprintf(nodename, "%s%d", "CPVModule", i) ;
- Float_t x = r * TMath::Sin( angle / kRADDEG ) ;
- Float_t y = -r * TMath::Cos( angle / kRADDEG ) ;
- Float_t z;
- TNode * cpvBoxNode = new TNode(nodename , nodename ,"CPVBox", x, y, 0, rotname ) ;
- cpvBoxNode->SetLineColor(kColorCPV) ;
- fNodes->Add(cpvBoxNode) ;
- cpvBoxNode->cd() ;
-
- // inside each CPV box:
-
- // Frame around CPV
- for (Int_t j=0; j<=1; j++) {
- sprintf(nodename, "CPVModule%d Frame%d", i, j+1) ;
- x = TMath::Sign(1,2*j-1) * (fGeom->GetCPVBoxSize(0) - fGeom->GetCPVFrameSize(0)) / 2;
- TNode * cpvFrameNode = new TNode(nodename , nodename ,"CPVFrameLR", x, 0, 0) ;
- cpvFrameNode->SetLineColor(kColorFrame) ;
- fNodes->Add(cpvFrameNode) ;
-
- sprintf(nodename, "CPVModule%d Frame%d", i, j+3) ;
- z = TMath::Sign(1,2*j-1) * (fGeom->GetCPVBoxSize(2) - fGeom->GetCPVFrameSize(2)) / 2;
- cpvFrameNode = new TNode(nodename , nodename ,"CPVFrameUD", 0, 0, z) ;
- cpvFrameNode->SetLineColor(kColorFrame) ;
- fNodes->Add(cpvFrameNode) ;
- }
-
- // 4 printed circuit boards
- for (Int_t j=0; j<4; j++) {
- sprintf(nodename, "CPVModule%d PCB%d", i, j+1) ;
- y = fGeom->GetCPVFrameSize(1) / 2 - fGeom->GetFTPosition(j) + fGeom->GetCPVTextoliteThickness()/2;
- TNode * cpvPCBNode = new TNode(nodename , nodename ,"CPVPCB", 0, y, 0) ;
- cpvPCBNode->SetLineColor(kColorPCB) ;
- fNodes->Add(cpvPCBNode) ;
- }
-
- // Gassiplex chips
- Float_t xStep = fGeom->GetCPVActiveSize(0) / (fGeom->GetNumberOfCPVChipsPhi() + 1);
- Float_t zStep = fGeom->GetCPVActiveSize(1) / (fGeom->GetNumberOfCPVChipsZ() + 1);
- y = fGeom->GetCPVFrameSize(1)/2 - fGeom->GetFTPosition(0) +
- fGeom->GetCPVTextoliteThickness() / 2 + fGeom->GetGassiplexChipSize(1) / 2 + 0.1;
- for (Int_t ix=0; ix<fGeom->GetNumberOfCPVChipsPhi(); ix++) {
- x = xStep * (ix+1) - fGeom->GetCPVActiveSize(0)/2;
- for (Int_t iz=0; iz<fGeom->GetNumberOfCPVChipsZ(); iz++) {
- z = zStep * (iz+1) - fGeom->GetCPVActiveSize(1)/2;
- sprintf(nodename, "CPVModule%d Chip(%dx%d)", i, ix+1,iz+1) ;
- TNode * cpvGassiplexNode = new TNode(nodename , nodename ,"CPVGassiplex", x, y, z) ;
- cpvGassiplexNode->SetLineColor(kColorGassiplex) ;
- fNodes->Add(cpvGassiplexNode) ;
- }
- }
-
- } // PHOS modules
-
- delete[] rotname ;
- delete[] nodename ;
+ GetGeometry() ;
}
//____________________________________________________________________________
{
// Create the PHOS geometry for Geant
- AliPHOSv0 *phostmp = (AliPHOSv0*)gAlice->GetModule("PHOS") ;
+ AliPHOSv0 *phostmp = dynamic_cast<AliPHOSv0*>(gAlice->GetModule("PHOS")) ;
if ( phostmp == NULL ) {
return;
}
+
+ AliPHOSGeometry * geom = GetGeometry() ;
+
// Get pointer to the array containing media indeces
Int_t *idtmed = fIdtmed->GetArray() - 699 ;
- Float_t bigbox[3] ;
- bigbox[0] = fGeom->GetOuterBoxSize(0) / 2.0 ;
- bigbox[1] = ( fGeom->GetOuterBoxSize(1) + fGeom->GetCPVBoxSize(1) ) / 2.0 ;
- bigbox[2] = fGeom->GetOuterBoxSize(2) / 2.0 ;
+ // Create a PHOS module.
- gMC->Gsvolu("PHOS", "BOX ", idtmed[798], bigbox, 3) ;
+ gMC->Gsvolu("PHOS", "TRD1", idtmed[798], geom->GetPHOSParams(), 4) ;
- this->CreateGeometryforPHOS() ;
- if ( strcmp( fGeom->GetName(), "GPS2") == 0 )
- this->CreateGeometryforPPSD() ;
- else if ( strcmp( fGeom->GetName(), "IHEP") == 0 )
+ this->CreateGeometryforEMC() ;
+
+ if (strstr(fTitle.Data(),"noCPV") == 0)
this->CreateGeometryforCPV() ;
- else
- cout << "AliPHOSv0::CreateGeometry : no charged particle identification system installed" << endl;
- // --- Position PHOS mdules in ALICE setup ---
+ this->CreateGeometryforSupport() ;
+ // --- Position PHOS mdules in ALICE setup ---
Int_t idrotm[99] ;
- Double_t const kRADDEG = 180.0 / kPI ;
-
- for( Int_t i = 1; i <= fGeom->GetNModules(); i++ ) {
+ Int_t iXYZ,iAngle;
+ char im[5] ;
+ Bool_t anyModuleCreated=0 ;
+ for (Int_t iModule = 0; iModule < 5 ; iModule++ ) {
+ sprintf(im,"%d",iModule+1) ;
+ if(strstr(GetTitle(),im)==0 && strcmp(GetTitle(),"IHEP")!=0 && strcmp(GetTitle(),"noCPV")!=0)
+ continue ;
+ anyModuleCreated=1 ;
+ Float_t angle[3][2];
+ for (iXYZ=0; iXYZ<3; iXYZ++)
+ for (iAngle=0; iAngle<2; iAngle++)
+ angle[iXYZ][iAngle] = geom->GetModuleAngle(iModule,iXYZ, iAngle);
+ AliMatrix(idrotm[iModule],
+ angle[0][0],angle[0][1],
+ angle[1][0],angle[1][1],
+ angle[2][0],angle[2][1]) ;
- Float_t angle = fGeom->GetPHOSAngle(i) ;
- AliMatrix(idrotm[i-1], 90.0, angle, 90.0, 90.0+angle, 0.0, 0.0) ;
-
- Float_t r = fGeom->GetIPtoOuterCoverDistance() + ( fGeom->GetOuterBoxSize(1) + fGeom->GetCPVBoxSize(1) ) / 2.0 ;
-
- Float_t xP1 = r * TMath::Sin( angle / kRADDEG ) ;
- Float_t yP1 = -r * TMath::Cos( angle / kRADDEG ) ;
-
- gMC->Gspos("PHOS", i, "ALIC", xP1, yP1, 0.0, idrotm[i-1], "ONLY") ;
-
- } // for GetNModules
-
+ Float_t pos[3];
+ for (iXYZ=0; iXYZ<3; iXYZ++)
+ pos[iXYZ] = geom->GetModuleCenter(iModule,iXYZ);
+ gMC->Gspos("PHOS", iModule+1, "ALIC", pos[0], pos[1], pos[2],
+ idrotm[iModule], "ONLY") ;
+ }
+ if(!anyModuleCreated)
+ AliError("No one PHOS module was created") ;
}
//____________________________________________________________________________
-void AliPHOSv0::CreateGeometryforPHOS()
+void AliPHOSv0::CreateGeometryforEMC()
{
// Create the PHOS-EMC geometry for GEANT
+ // Author: Dmitri Peressounko August 2001
+ // The used coordinate system:
+ // 1. in Module: X along longer side, Y out of beam, Z along shorter side (along beam)
+ // 2. In Strip the same: X along longer side, Y out of beam, Z along shorter side (along beam)
+
+
//BEGIN_HTML
/*
<H2>
// Get pointer to the array containing media indexes
Int_t *idtmed = fIdtmed->GetArray() - 699 ;
- // ---
- // --- Define PHOS box volume, fPUFPill with thermo insulating foam ---
- // --- Foam Thermo Insulating outer cover dimensions ---
- // --- Put it in bigbox = PHOS
-
- Float_t dphos[3] ;
- dphos[0] = fGeom->GetOuterBoxSize(0) / 2.0 ;
- dphos[1] = fGeom->GetOuterBoxSize(1) / 2.0 ;
- dphos[2] = fGeom->GetOuterBoxSize(2) / 2.0 ;
-
- gMC->Gsvolu("EMCA", "BOX ", idtmed[706], dphos, 3) ;
+ AliPHOSGeometry * geom = GetGeometry() ;
+ AliPHOSEMCAGeometry * emcg = geom->GetEMCAGeometry() ;
+ Float_t par[4];
+ Int_t ipar;
- Float_t yO = - fGeom->GetCPVBoxSize(1) / 2.0 ;
+ // ======= Define the strip ===============
- gMC->Gspos("EMCA", 1, "PHOS", 0.0, yO, 0.0, 0, "ONLY") ;
-
- // ---
- // --- Define Textolit Wall box, position inside EMCA ---
- // --- Textolit Wall box dimentions ---
-
-
- Float_t dptxw[3];
- dptxw[0] = fGeom->GetTextolitBoxSize(0) / 2.0 ;
- dptxw[1] = fGeom->GetTextolitBoxSize(1) / 2.0 ;
- dptxw[2] = fGeom->GetTextolitBoxSize(2) / 2.0 ;
-
- gMC->Gsvolu("PTXW", "BOX ", idtmed[707], dptxw, 3);
-
- yO = ( fGeom->GetOuterBoxThickness(1) - fGeom->GetUpperPlateThickness() ) / 2. ;
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetStripHalfSize() + ipar);
+ gMC->Gsvolu("PSTR", "BOX ", idtmed[716], par, 3) ; //Made of steel
- gMC->Gspos("PTXW", 1, "EMCA", 0.0, yO, 0.0, 0, "ONLY") ;
-
- // ---
- // --- Define Upper Polystyrene Foam Plate, place inside PTXW ---
- // --- immediately below Foam Thermo Insulation Upper plate ---
-
- // --- Upper Polystyrene Foam plate thickness ---
-
- Float_t dpufp[3] ;
- dpufp[0] = fGeom->GetTextolitBoxSize(0) / 2.0 ;
- dpufp[1] = fGeom->GetSecondUpperPlateThickness() / 2. ;
- dpufp[2] = fGeom->GetTextolitBoxSize(2) /2.0 ;
-
- gMC->Gsvolu("PUFP", "BOX ", idtmed[703], dpufp, 3) ;
-
- yO = ( fGeom->GetTextolitBoxSize(1) - fGeom->GetSecondUpperPlateThickness() ) / 2.0 ;
-
- gMC->Gspos("PUFP", 1, "PTXW", 0.0, yO, 0.0, 0, "ONLY") ;
-
- // ---
- // --- Define air-filled box, place inside PTXW ---
- // --- Inner AIR volume dimensions ---
+ // --- define steel volume (cell of the strip unit)
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetAirCellHalfSize() + ipar);
+ gMC->Gsvolu("PCEL", "BOX ", idtmed[798], par, 3);
+
+ // --- define wrapped crystal and put it into steel cell
+
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetWrappedHalfSize() + ipar);
+ gMC->Gsvolu("PWRA", "BOX ", idtmed[702], par, 3);
+ const Float_t * pin = emcg->GetAPDHalfSize() ;
+ const Float_t * preamp = emcg->GetPreampHalfSize() ;
+ Float_t y = (emcg->GetAirGapLed()-2*pin[1]-2*preamp[1])/2;
+ gMC->Gspos("PWRA", 1, "PCEL", 0.0, y, 0.0, 0, "ONLY") ;
+
+ // --- Define crystal and put it into wrapped crystall ---
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetCrystalHalfSize() + ipar);
+ gMC->Gsvolu("PXTL", "BOX ", idtmed[699], par, 3) ;
+ gMC->Gspos("PXTL", 1, "PWRA", 0.0, 0.0, 0.0, 0, "ONLY") ;
+
+ // --- define APD/PIN preamp and put it into AirCell
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetAPDHalfSize() + ipar);
+ gMC->Gsvolu("PPIN", "BOX ", idtmed[705], par, 3) ;
+ const Float_t * crystal = emcg->GetCrystalHalfSize() ;
+ y = crystal[1] + emcg->GetAirGapLed() /2 - preamp[1];
+ gMC->Gspos("PPIN", 1, "PCEL", 0.0, y, 0.0, 0, "ONLY") ;
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetPreampHalfSize() + ipar);
+ gMC->Gsvolu("PREA", "BOX ", idtmed[711], par, 3) ; // Here I assumed preamp as a printed Circuit
+ y = crystal[1] + emcg->GetAirGapLed() /2 + pin[1] ; // May it should be changed
+ gMC->Gspos("PREA", 1, "PCEL", 0.0, y, 0.0, 0, "ONLY") ; // to ceramics?
+
+
+ // --- Fill strip with wrapped cristals in steel cells
+
+ const Float_t* splate = emcg->GetSupportPlateHalfSize();
+ y = -splate[1] ;
+ const Float_t* acel = emcg->GetAirCellHalfSize() ;
+
+ for(Int_t lev = 2, icel = 1;
+ icel <= emcg->GetNCellsXInStrip()*emcg->GetNCellsZInStrip();
+ icel += 2, lev += 2) {
+ Float_t x = (2*(lev / 2) - 1 - emcg->GetNCellsXInStrip())* acel[0] ;
+ Float_t z = acel[2];
+ gMC->Gspos("PCEL", icel, "PSTR", x, y, +z, 0, "ONLY") ;
+ gMC->Gspos("PCEL", icel + 1, "PSTR", x, y, -z, 0, "ONLY") ;
+ }
- Float_t dpair[3] ;
- dpair[0] = fGeom->GetAirFilledBoxSize(0) / 2.0 ;
- dpair[1] = fGeom->GetAirFilledBoxSize(1) / 2.0 ;
- dpair[2] = fGeom->GetAirFilledBoxSize(2) / 2.0 ;
-
- gMC->Gsvolu("PAIR", "BOX ", idtmed[798], dpair, 3) ;
-
- yO = ( fGeom->GetTextolitBoxSize(1) - fGeom->GetAirFilledBoxSize(1) ) / 2.0 - fGeom->GetSecondUpperPlateThickness() ;
-
- gMC->Gspos("PAIR", 1, "PTXW", 0.0, yO, 0.0, 0, "ONLY") ;
-
-// --- Dimensions of PbWO4 crystal ---
-
- Float_t xtlX = fGeom->GetCrystalSize(0) ;
- Float_t xtlY = fGeom->GetCrystalSize(1) ;
- Float_t xtlZ = fGeom->GetCrystalSize(2) ;
-
- Float_t dptcb[3] ;
- dptcb[0] = fGeom->GetNPhi() * ( xtlX + 2 * fGeom->GetGapBetweenCrystals() ) / 2.0 + fGeom->GetModuleBoxThickness() ;
- dptcb[1] = ( xtlY + fGeom->GetCrystalSupportHeight() + fGeom->GetCrystalWrapThickness() + fGeom->GetCrystalHolderThickness() ) / 2.0
- + fGeom->GetModuleBoxThickness() / 2.0 ;
- dptcb[2] = fGeom->GetNZ() * ( xtlZ + 2 * fGeom->GetGapBetweenCrystals() ) / 2.0 + fGeom->GetModuleBoxThickness() ;
+ // --- define the support plate, hole in it and position it in strip ----
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetSupportPlateHalfSize() + ipar);
+ gMC->Gsvolu("PSUP", "BOX ", idtmed[701], par, 3) ;
- gMC->Gsvolu("PTCB", "BOX ", idtmed[706], dptcb, 3) ;
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetSupportPlateInHalfSize() + ipar);
+ gMC->Gsvolu("PSHO", "BOX ", idtmed[798], par, 3) ;
+ Float_t z = emcg->GetSupportPlateThickness()/2 ;
+ gMC->Gspos("PSHO", 1, "PSUP", 0.0, 0.0, z, 0, "ONLY") ;
- yO = fGeom->GetAirFilledBoxSize(1) / 2.0 - dptcb[1]
- - ( fGeom->GetIPtoCrystalSurface() - fGeom->GetIPtoOuterCoverDistance() - fGeom->GetModuleBoxThickness()
- - fGeom->GetUpperPlateThickness() - fGeom->GetSecondUpperPlateThickness() ) ;
-
- gMC->Gspos("PTCB", 1, "PAIR", 0.0, yO, 0.0, 0, "ONLY") ;
+ y = acel[1] ;
+ gMC->Gspos("PSUP", 1, "PSTR", 0.0, y, 0.0, 0, "ONLY") ;
- // ---
- // --- Define Crystal BLock filled with air, position it inside PTCB ---
- Float_t dpcbl[3] ;
- dpcbl[0] = fGeom->GetNPhi() * ( xtlX + 2 * fGeom->GetGapBetweenCrystals() ) / 2.0 ;
- dpcbl[1] = ( xtlY + fGeom->GetCrystalSupportHeight() + fGeom->GetCrystalWrapThickness() + fGeom->GetCrystalHolderThickness() ) / 2.0 ;
- dpcbl[2] = fGeom->GetNZ() * ( xtlZ + 2 * fGeom->GetGapBetweenCrystals() ) / 2.0 ;
+ // ========== Fill module with strips and put them into inner thermoinsulation=============
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetInnerThermoHalfSize() + ipar);
+ gMC->Gsvolu("PTII", "BOX ", idtmed[706], par, 3) ;
- gMC->Gsvolu("PCBL", "BOX ", idtmed[798], dpcbl, 3) ;
+ const Float_t * inthermo = emcg->GetInnerThermoHalfSize() ;
+ const Float_t * strip = emcg->GetStripHalfSize() ;
+ y = inthermo[1] - strip[1] ;
+ Int_t irow;
+ Int_t nr = 1 ;
+ Int_t icol ;
- // --- Divide PCBL in X (phi) and Z directions --
- gMC->Gsdvn("PROW", "PCBL", Int_t (fGeom->GetNPhi()), 1) ;
- gMC->Gsdvn("PCEL", "PROW", Int_t (fGeom->GetNZ()), 3) ;
-
- yO = -fGeom->GetModuleBoxThickness() / 2.0 ;
+ for(irow = 0; irow < emcg->GetNStripX(); irow ++){
+ Float_t x = (2*irow + 1 - emcg->GetNStripX())* strip[0] ;
+ for(icol = 0; icol < emcg->GetNStripZ(); icol ++){
+ z = (2*icol + 1 - emcg->GetNStripZ()) * strip[2] ;
+ gMC->Gspos("PSTR", nr, "PTII", x, y, z, 0, "ONLY") ;
+ nr++ ;
+ }
+ }
- gMC->Gspos("PCBL", 1, "PTCB", 0.0, yO, 0.0, 0, "ONLY") ;
-
- // ---
- // --- Define STeel (actually, it's titanium) Cover volume, place inside PCEL
- Float_t dpstc[3] ;
- dpstc[0] = ( xtlX + 2 * fGeom->GetCrystalWrapThickness() ) / 2.0 ;
- dpstc[1] = ( xtlY + fGeom->GetCrystalSupportHeight() + fGeom->GetCrystalWrapThickness() + fGeom->GetCrystalHolderThickness() ) / 2.0 ;
- dpstc[2] = ( xtlZ + 2 * fGeom->GetCrystalWrapThickness() + 2 * fGeom->GetCrystalHolderThickness() ) / 2.0 ;
+ // ------- define the air gap between thermoinsulation and cooler
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetAirGapHalfSize() + ipar);
+ gMC->Gsvolu("PAGA", "BOX ", idtmed[798], par, 3) ;
+ const Float_t * agap = emcg->GetAirGapHalfSize() ;
+ y = agap[1] - inthermo[1] ;
- gMC->Gsvolu("PSTC", "BOX ", idtmed[704], dpstc, 3) ;
-
- gMC->Gspos("PSTC", 1, "PCEL", 0.0, 0.0, 0.0, 0, "ONLY") ;
+ gMC->Gspos("PTII", 1, "PAGA", 0.0, y, 0.0, 0, "ONLY") ;
- // ---
- // --- Define Tyvek volume, place inside PSTC ---
- Float_t dppap[3] ;
- dppap[0] = xtlX / 2.0 + fGeom->GetCrystalWrapThickness() ;
- dppap[1] = ( xtlY + fGeom->GetCrystalSupportHeight() + fGeom->GetCrystalWrapThickness() ) / 2.0 ;
- dppap[2] = xtlZ / 2.0 + fGeom->GetCrystalWrapThickness() ;
+ // ------- define the Al passive cooler
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetCoolerHalfSize() + ipar);
+ gMC->Gsvolu("PCOR", "BOX ", idtmed[701], par, 3) ;
+ const Float_t * cooler = emcg->GetCoolerHalfSize() ;
+ y = cooler[1] - agap[1] ;
- gMC->Gsvolu("PPAP", "BOX ", idtmed[702], dppap, 3) ;
+ gMC->Gspos("PAGA", 1, "PCOR", 0.0, y, 0.0, 0, "ONLY") ;
- yO = ( xtlY + fGeom->GetCrystalSupportHeight() + fGeom->GetCrystalWrapThickness() ) / 2.0
- - ( xtlY + fGeom->GetCrystalSupportHeight() + fGeom->GetCrystalWrapThickness() + fGeom->GetCrystalHolderThickness() ) / 2.0 ;
-
- gMC->Gspos("PPAP", 1, "PSTC", 0.0, yO, 0.0, 0, "ONLY") ;
-
- // ---
- // --- Define PbWO4 crystal volume, place inside PPAP ---
- Float_t dpxtl[3] ;
-
- dpxtl[0] = xtlX / 2.0 ;
- dpxtl[1] = xtlY / 2.0 ;
- dpxtl[2] = xtlZ / 2.0 ;
+ // ------- define the outer thermoinsulating cover
+ for (ipar=0; ipar<4; ipar++) par[ipar] = *(emcg->GetOuterThermoParams() + ipar);
+ gMC->Gsvolu("PTIO", "TRD1", idtmed[706], par, 4) ;
+ const Float_t * outparams = emcg->GetOuterThermoParams() ;
- gMC->Gsvolu("PXTL", "BOX ", idtmed[699], dpxtl, 3) ;
-
- yO = ( xtlY + fGeom->GetCrystalSupportHeight() + fGeom->GetCrystalWrapThickness() ) / 2.0 - xtlY / 2.0 - fGeom->GetCrystalWrapThickness() ;
-
- gMC->Gspos("PXTL", 1, "PPAP", 0.0, yO, 0.0, 0, "ONLY") ;
-
- // ---
- // --- Define crystal support volume, place inside PPAP ---
- Float_t dpsup[3] ;
-
- dpsup[0] = xtlX / 2.0 + fGeom->GetCrystalWrapThickness() ;
- dpsup[1] = fGeom->GetCrystalSupportHeight() / 2.0 ;
- dpsup[2] = xtlZ / 2.0 + fGeom->GetCrystalWrapThickness() ;
-
- gMC->Gsvolu("PSUP", "BOX ", idtmed[798], dpsup, 3) ;
-
- yO = fGeom->GetCrystalSupportHeight() / 2.0 - ( xtlY + fGeom->GetCrystalSupportHeight() + fGeom->GetCrystalWrapThickness() ) / 2.0 ;
-
- gMC->Gspos("PSUP", 1, "PPAP", 0.0, yO, 0.0, 0, "ONLY") ;
-
- // ---
- // --- Define PIN-diode volume and position it inside crystal support ---
- // --- right behind PbWO4 crystal
-
- // --- PIN-diode dimensions ---
-
-
- Float_t dppin[3] ;
- dppin[0] = fGeom->GetPinDiodeSize(0) / 2.0 ;
- dppin[1] = fGeom->GetPinDiodeSize(1) / 2.0 ;
- dppin[2] = fGeom->GetPinDiodeSize(2) / 2.0 ;
-
- gMC->Gsvolu("PPIN", "BOX ", idtmed[705], dppin, 3) ;
-
- yO = fGeom->GetCrystalSupportHeight() / 2.0 - fGeom->GetPinDiodeSize(1) / 2.0 ;
-
- gMC->Gspos("PPIN", 1, "PSUP", 0.0, yO, 0.0, 0, "ONLY") ;
-
- // ---
- // --- Define Upper Cooling Panel, place it on top of PTCB ---
- Float_t dpucp[3] ;
- // --- Upper Cooling Plate thickness ---
-
- dpucp[0] = dptcb[0] ;
- dpucp[1] = fGeom->GetUpperCoolingPlateThickness() ;
- dpucp[2] = dptcb[2] ;
-
- gMC->Gsvolu("PUCP", "BOX ", idtmed[701], dpucp,3) ;
+ Int_t idrotm[99] ;
+ AliMatrix(idrotm[1], 90.0, 0.0, 0.0, 0.0, 90.0, 270.0) ;
+ // Frame in outer thermoinsulation and so on: z out of beam, y along beam, x across beam
+
+ z = outparams[3] - cooler[1] ;
+ gMC->Gspos("PCOR", 1, "PTIO", 0., 0.0, z, idrotm[1], "ONLY") ;
+
+ // -------- Define the outer Aluminium cover -----
+ for (ipar=0; ipar<4; ipar++) par[ipar] = *(emcg->GetAlCoverParams() + ipar);
+ gMC->Gsvolu("PCOL", "TRD1", idtmed[701], par, 4) ;
+ const Float_t * covparams = emcg->GetAlCoverParams() ;
+ z = covparams[3] - outparams[3] ;
+ gMC->Gspos("PTIO", 1, "PCOL", 0., 0.0, z, 0, "ONLY") ;
+
+ // --------- Define front fiberglass cover -----------
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetFiberGlassHalfSize() + ipar);
+ gMC->Gsvolu("PFGC", "BOX ", idtmed[717], par, 3) ;
+ z = - outparams[3] ;
+ gMC->Gspos("PFGC", 1, "PCOL", 0., 0.0, z, 0, "ONLY") ;
+
+ //=============This is all with cold section==============
+
+
+ //------ Warm Section --------------
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetWarmAlCoverHalfSize() + ipar);
+ gMC->Gsvolu("PWAR", "BOX ", idtmed[701], par, 3) ;
+ const Float_t * warmcov = emcg->GetWarmAlCoverHalfSize() ;
+
+ // --- Define the outer thermoinsulation ---
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetWarmThermoHalfSize() + ipar);
+ gMC->Gsvolu("PWTI", "BOX ", idtmed[706], par, 3) ;
+ const Float_t * warmthermo = emcg->GetWarmThermoHalfSize() ;
+ z = -warmcov[2] + warmthermo[2] ;
+
+ gMC->Gspos("PWTI", 1, "PWAR", 0., 0.0, z, 0, "ONLY") ;
+
+ // --- Define cables area and put in it T-supports ----
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetTCables1HalfSize() + ipar);
+ gMC->Gsvolu("PCA1", "BOX ", idtmed[718], par, 3) ;
+ const Float_t * cbox = emcg->GetTCables1HalfSize() ;
+
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetTSupport1HalfSize() + ipar);
+ gMC->Gsvolu("PBE1", "BOX ", idtmed[701], par, 3) ;
+ const Float_t * beams = emcg->GetTSupport1HalfSize() ;
+ Int_t isup ;
+ for(isup = 0; isup < emcg->GetNTSuppots(); isup++){
+ Float_t x = -cbox[0] + beams[0] + (2*beams[0]+emcg->GetTSupportDist())*isup ;
+ gMC->Gspos("PBE1", isup, "PCA1", x, 0.0, 0.0, 0, "ONLY") ;
+ }
- yO = ( fGeom->GetAirFilledBoxSize(1) - fGeom->GetUpperCoolingPlateThickness() ) / 2.
- - ( fGeom->GetIPtoCrystalSurface() - fGeom->GetIPtoOuterCoverDistance() - fGeom->GetModuleBoxThickness()
- - fGeom->GetUpperPlateThickness() - fGeom->GetSecondUpperPlateThickness() - fGeom->GetUpperCoolingPlateThickness() ) ;
+ z = -warmthermo[2] + cbox[2];
+ gMC->Gspos("PCA1", 1, "PWTI", 0.0, 0.0, z, 0, "ONLY") ;
- gMC->Gspos("PUCP", 1, "PAIR", 0.0, yO, 0.0, 0, "ONLY") ;
-
- // ---
- // --- Define Al Support Plate, position it inside PAIR ---
- // --- right beneath PTCB ---
- // --- Al Support Plate thickness ---
-
- Float_t dpasp[3] ;
- dpasp[0] = fGeom->GetAirFilledBoxSize(0) / 2.0 ;
- dpasp[1] = fGeom->GetSupportPlateThickness() / 2.0 ;
- dpasp[2] = fGeom->GetAirFilledBoxSize(2) / 2.0 ;
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetTCables2HalfSize() + ipar);
+ gMC->Gsvolu("PCA2", "BOX ", idtmed[718], par, 3) ;
+ const Float_t * cbox2 = emcg->GetTCables2HalfSize() ;
- gMC->Gsvolu("PASP", "BOX ", idtmed[701], dpasp, 3) ;
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetTSupport2HalfSize() + ipar);
+ gMC->Gsvolu("PBE2", "BOX ", idtmed[701], par, 3) ;
+ for(isup = 0; isup < emcg->GetNTSuppots(); isup++){
+ Float_t x = -cbox[0] + beams[0] + (2*beams[0]+emcg->GetTSupportDist())*isup ;
+ gMC->Gspos("PBE2", isup, "PCA2", x, 0.0, 0.0, 0, "ONLY") ;
+ }
- yO = ( fGeom->GetAirFilledBoxSize(1) - fGeom->GetSupportPlateThickness() ) / 2.
- - ( fGeom->GetIPtoCrystalSurface() - fGeom->GetIPtoOuterCoverDistance()
- - fGeom->GetUpperPlateThickness() - fGeom->GetSecondUpperPlateThickness() + dpcbl[1] * 2 ) ;
+ z = -warmthermo[2] + 2*cbox[2] + cbox2[2];
+ gMC->Gspos("PCA2", 1, "PWTI", 0.0, 0.0, z, 0, "ONLY") ;
- gMC->Gspos("PASP", 1, "PAIR", 0.0, yO, 0.0, 0, "ONLY") ;
-
- // ---
- // --- Define Thermo Insulating Plate, position it inside PAIR ---
- // --- right beneath PASP ---
- // --- Lower Thermo Insulating Plate thickness ---
- Float_t dptip[3] ;
- dptip[0] = fGeom->GetAirFilledBoxSize(0) / 2.0 ;
- dptip[1] = fGeom->GetLowerThermoPlateThickness() / 2.0 ;
- dptip[2] = fGeom->GetAirFilledBoxSize(2) / 2.0 ;
-
- gMC->Gsvolu("PTIP", "BOX ", idtmed[706], dptip, 3) ;
-
- yO = ( fGeom->GetAirFilledBoxSize(1) - fGeom->GetLowerThermoPlateThickness() ) / 2.
- - ( fGeom->GetIPtoCrystalSurface() - fGeom->GetIPtoOuterCoverDistance() - fGeom->GetUpperPlateThickness()
- - fGeom->GetSecondUpperPlateThickness() + dpcbl[1] * 2 + fGeom->GetSupportPlateThickness() ) ;
-
- gMC->Gspos("PTIP", 1, "PAIR", 0.0, yO, 0.0, 0, "ONLY") ;
-
- // ---
- // --- Define Textolit Plate, position it inside PAIR ---
- // --- right beneath PTIP ---
- // --- Lower Textolit Plate thickness ---
-
- Float_t dptxp[3] ;
- dptxp[0] = fGeom->GetAirFilledBoxSize(0) / 2.0 ;
- dptxp[1] = fGeom->GetLowerTextolitPlateThickness() / 2.0 ;
- dptxp[2] = fGeom->GetAirFilledBoxSize(2) / 2.0 ;
-
- gMC->Gsvolu("PTXP", "BOX ", idtmed[707], dptxp, 3) ;
-
- yO = ( fGeom->GetAirFilledBoxSize(1) - fGeom->GetLowerTextolitPlateThickness() ) / 2.
- - ( fGeom->GetIPtoCrystalSurface() - fGeom->GetIPtoOuterCoverDistance() - fGeom->GetUpperPlateThickness()
- - fGeom->GetSecondUpperPlateThickness() + dpcbl[1] * 2 + fGeom->GetSupportPlateThickness()
- + fGeom->GetLowerThermoPlateThickness() ) ;
-
- gMC->Gspos("PTXP", 1, "PAIR", 0.0, yO, 0.0, 0, "ONLY") ;
-
-}
-
-//____________________________________________________________________________
-void AliPHOSv0::CreateGeometryforPPSD()
-{
- // Create the PHOS-PPSD geometry for GEANT
-
- //BEGIN_HTML
- /*
- <H2>
- Geant3 geometry tree of PHOS-PPSD in ALICE
- </H2>
- <P><CENTER>
- <IMG Align=BOTTOM ALT="PPSD geant tree" SRC="../images/PPSDinAlice.gif">
- </CENTER><P>
- */
- //END_HTML
-
- // Get pointer to the array containing media indexes
- Int_t *idtmed = fIdtmed->GetArray() - 699 ;
+ // --- Define frame ---
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetFrameXHalfSize() + ipar);
+ gMC->Gsvolu("PFRX", "BOX ", idtmed[716], par, 3) ;
+ const Float_t * posit1 = emcg->GetFrameXPosition() ;
+ gMC->Gspos("PFRX", 1, "PWTI", posit1[0], posit1[1], posit1[2], 0, "ONLY") ;
+ gMC->Gspos("PFRX", 2, "PWTI", posit1[0], -posit1[1], posit1[2], 0, "ONLY") ;
- // The box containing all ppsd's for one PHOS module filled with air
- Float_t ppsd[3] ;
- ppsd[0] = fGeom->GetCPVBoxSize(0) / 2.0 ;
- ppsd[1] = fGeom->GetCPVBoxSize(1) / 2.0 ;
- ppsd[2] = fGeom->GetCPVBoxSize(2) / 2.0 ;
-
- gMC->Gsvolu("PPSD", "BOX ", idtmed[798], ppsd, 3) ;
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetFrameZHalfSize() + ipar);
+ gMC->Gsvolu("PFRZ", "BOX ", idtmed[716], par, 3) ;
+ const Float_t * posit2 = emcg->GetFrameZPosition() ;
+ gMC->Gspos("PFRZ", 1, "PWTI", posit2[0], posit2[1], posit2[2], 0, "ONLY") ;
+ gMC->Gspos("PFRZ", 2, "PWTI", -posit2[0], posit2[1], posit2[2], 0, "ONLY") ;
- Float_t yO = fGeom->GetOuterBoxSize(1) / 2.0 ;
+ // --- Define Fiber Glass support ---
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetFGupXHalfSize() + ipar);
+ gMC->Gsvolu("PFG1", "BOX ", idtmed[717], par, 3) ;
+ const Float_t * posit3 = emcg->GetFGupXPosition() ;
+ gMC->Gspos("PFG1", 1, "PWTI", posit3[0], posit3[1], posit3[2], 0, "ONLY") ;
+ gMC->Gspos("PFG1", 2, "PWTI", posit3[0], -posit3[1], posit3[2], 0, "ONLY") ;
- gMC->Gspos("PPSD", 1, "PHOS", 0.0, yO, 0.0, 0, "ONLY") ;
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetFGupZHalfSize() + ipar);
+ gMC->Gsvolu("PFG2", "BOX ", idtmed[717], par, 3) ;
+ const Float_t * posit4 = emcg->GetFGupZPosition();
+ gMC->Gspos("PFG2", 1, "PWTI", posit4[0], posit4[1], posit4[2], 0, "ONLY") ;
+ gMC->Gspos("PFG2", 2, "PWTI", -posit4[0], posit4[1], posit4[2], 0, "ONLY") ;
- // Now we build a micromegas module
- // The box containing the whole module filled with epoxy (FR4)
-
- Float_t mppsd[3] ;
- mppsd[0] = fGeom->GetPPSDModuleSize(0) / 2.0 ;
- mppsd[1] = fGeom->GetPPSDModuleSize(1) / 2.0 ;
- mppsd[2] = fGeom->GetPPSDModuleSize(2) / 2.0 ;
-
- gMC->Gsvolu("MPPS", "BOX ", idtmed[708], mppsd, 3) ;
-
- // Inside mppsd :
- // 1. The Top Lid made of epoxy (FR4)
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetFGlowXHalfSize() + ipar);
+ gMC->Gsvolu("PFG3", "BOX ", idtmed[717], par, 3) ;
+ const Float_t * posit5 = emcg->GetFGlowXPosition() ;
+ gMC->Gspos("PFG3", 1, "PWTI", posit5[0], posit5[1], posit5[2], 0, "ONLY") ;
+ gMC->Gspos("PFG3", 2, "PWTI", posit5[0], -posit5[1], posit5[2], 0, "ONLY") ;
- Float_t tlppsd[3] ;
- tlppsd[0] = fGeom->GetPPSDModuleSize(0) / 2.0 ;
- tlppsd[1] = fGeom->GetLidThickness() / 2.0 ;
- tlppsd[2] = fGeom->GetPPSDModuleSize(2) / 2.0 ;
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetFGlowZHalfSize() + ipar);
+ gMC->Gsvolu("PFG4", "BOX ", idtmed[717], par, 3) ;
+ const Float_t * posit6 = emcg->GetFGlowZPosition() ;
+ gMC->Gspos("PFG4", 1, "PWTI", posit6[0], posit6[1], posit6[2], 0, "ONLY") ;
+ gMC->Gspos("PFG4", 2, "PWTI", -posit6[0], posit6[1], posit6[2], 0, "ONLY") ;
- gMC->Gsvolu("TLPS", "BOX ", idtmed[708], tlppsd, 3) ;
-
- Float_t y0 = ( fGeom->GetMicromegas1Thickness() - fGeom->GetLidThickness() ) / 2. ;
-
- gMC->Gspos("TLPS", 1, "MPPS", 0.0, y0, 0.0, 0, "ONLY") ;
-
- // 2. the upper panel made of composite material
-
- Float_t upppsd[3] ;
- upppsd[0] = ( fGeom->GetPPSDModuleSize(0) - fGeom->GetMicromegasWallThickness() ) / 2.0 ;
- upppsd[1] = fGeom->GetCompositeThickness() / 2.0 ;
- upppsd[2] = ( fGeom->GetPPSDModuleSize(2) - fGeom->GetMicromegasWallThickness() ) / 2.0 ;
-
- gMC->Gsvolu("UPPS", "BOX ", idtmed[709], upppsd, 3) ;
+ // --- Define Air Gap for FEE electronics -----
- y0 = y0 - fGeom->GetLidThickness() / 2. - fGeom->GetCompositeThickness() / 2. ;
-
- gMC->Gspos("UPPS", 1, "MPPS", 0.0, y0, 0.0, 0, "ONLY") ;
-
- // 3. the anode made of Copper
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetFEEAirHalfSize() + ipar);
+ gMC->Gsvolu("PAFE", "BOX ", idtmed[798], par, 3) ;
+ const Float_t * posit7 = emcg->GetFEEAirPosition() ;
+ gMC->Gspos("PAFE", 1, "PWTI", posit7[0], posit7[1], posit7[2], 0, "ONLY") ;
- Float_t anppsd[3] ;
- anppsd[0] = ( fGeom->GetPPSDModuleSize(0) - fGeom->GetMicromegasWallThickness() ) / 2.0 ;
- anppsd[1] = fGeom->GetAnodeThickness() / 2.0 ;
- anppsd[2] = ( fGeom->GetPPSDModuleSize(2) - fGeom->GetMicromegasWallThickness() ) / 2.0 ;
-
- gMC->Gsvolu("ANPS", "BOX ", idtmed[710], anppsd, 3) ;
+ // Define the EMC module volume and combine Cool and Warm sections
- y0 = y0 - fGeom->GetCompositeThickness() / 2. - fGeom->GetAnodeThickness() / 2. ;
+ for (ipar=0; ipar<4; ipar++) par[ipar] = *(emcg->GetEMCParams() + ipar);
+ gMC->Gsvolu("PEMC", "TRD1", idtmed[798], par, 4) ;
+ z = - warmcov[2] ;
+ gMC->Gspos("PCOL", 1, "PEMC", 0., 0., z, 0, "ONLY") ;
+ z = covparams[3] ;
+ gMC->Gspos("PWAR", 1, "PEMC", 0., 0., z, 0, "ONLY") ;
- gMC->Gspos("ANPS", 1, "MPPS", 0.0, y0, 0.0, 0, "ONLY") ;
-
- // 4. the conversion gap + avalanche gap filled with gas
-
- Float_t ggppsd[3] ;
- ggppsd[0] = ( fGeom->GetPPSDModuleSize(0) - fGeom->GetMicromegasWallThickness() ) / 2.0 ;
- ggppsd[1] = ( fGeom->GetConversionGap() + fGeom->GetAvalancheGap() ) / 2.0 ;
- ggppsd[2] = ( fGeom->GetPPSDModuleSize(2) - fGeom->GetMicromegasWallThickness() ) / 2.0 ;
-
- gMC->Gsvolu("GGPS", "BOX ", idtmed[715], ggppsd, 3) ;
- // --- Divide GGPP in X (phi) and Z directions --
- gMC->Gsdvn("GROW", "GGPS", fGeom->GetNumberOfPadsPhi(), 1) ;
- gMC->Gsdvn("GCEL", "GROW", fGeom->GetNumberOfPadsZ() , 3) ;
-
- y0 = y0 - fGeom->GetAnodeThickness() / 2. - ( fGeom->GetConversionGap() + fGeom->GetAvalancheGap() ) / 2. ;
-
- gMC->Gspos("GGPS", 1, "MPPS", 0.0, y0, 0.0, 0, "ONLY") ;
-
-
- // 6. the cathode made of Copper
-
- Float_t cappsd[3] ;
- cappsd[0] = ( fGeom->GetPPSDModuleSize(0) - fGeom->GetMicromegasWallThickness() ) / 2.0 ;
- cappsd[1] = fGeom->GetCathodeThickness() / 2.0 ;
- cappsd[2] = ( fGeom->GetPPSDModuleSize(2) - fGeom->GetMicromegasWallThickness() ) / 2.0 ;
-
- gMC->Gsvolu("CAPS", "BOX ", idtmed[710], cappsd, 3) ;
-
- y0 = y0 - ( fGeom->GetAvalancheGap() + fGeom->GetAvalancheGap() ) / 2. - fGeom->GetCathodeThickness() / 2. ;
-
- gMC->Gspos("CAPS", 1, "MPPS", 0.0, y0, 0.0, 0, "ONLY") ;
-
- // 7. the printed circuit made of G10
-
- Float_t pcppsd[3] ;
- pcppsd[0] = ( fGeom->GetPPSDModuleSize(0) - fGeom->GetMicromegasWallThickness() ) / 2,.0 ;
- pcppsd[1] = fGeom->GetPCThickness() / 2.0 ;
- pcppsd[2] = ( fGeom->GetPPSDModuleSize(2) - fGeom->GetMicromegasWallThickness() ) / 2.0 ;
-
- gMC->Gsvolu("PCPS", "BOX ", idtmed[711], cappsd, 3) ;
-
- y0 = y0 - fGeom->GetCathodeThickness() / 2. - fGeom->GetPCThickness() / 2. ;
-
- gMC->Gspos("PCPS", 1, "MPPS", 0.0, y0, 0.0, 0, "ONLY") ;
-
- // 8. the lower panel made of composite material
-
- Float_t lpppsd[3] ;
- lpppsd[0] = ( fGeom->GetPPSDModuleSize(0) - fGeom->GetMicromegasWallThickness() ) / 2.0 ;
- lpppsd[1] = fGeom->GetCompositeThickness() / 2.0 ;
- lpppsd[2] = ( fGeom->GetPPSDModuleSize(2) - fGeom->GetMicromegasWallThickness() ) / 2.0 ;
-
- gMC->Gsvolu("LPPS", "BOX ", idtmed[709], lpppsd, 3) ;
-
- y0 = y0 - fGeom->GetPCThickness() / 2. - fGeom->GetCompositeThickness() / 2. ;
-
- gMC->Gspos("LPPS", 1, "MPPS", 0.0, y0, 0.0, 0, "ONLY") ;
-
- // Position the fNumberOfModulesPhi x fNumberOfModulesZ modules (mppsd) inside PPSD to cover a PHOS module
- // the top and bottom one's (which are assumed identical) :
-
- Float_t yt = ( fGeom->GetCPVBoxSize(1) - fGeom->GetMicromegas1Thickness() ) / 2. ;
- Float_t yb = - ( fGeom->GetCPVBoxSize(1) - fGeom->GetMicromegas2Thickness() ) / 2. ;
-
- Int_t copyNumbertop = 0 ;
- Int_t copyNumberbot = fGeom->GetNumberOfModulesPhi() * fGeom->GetNumberOfModulesZ() ;
-
- Float_t x = ( fGeom->GetCPVBoxSize(0) - fGeom->GetPPSDModuleSize(0) ) / 2. ;
-
- for ( Int_t iphi = 1; iphi <= fGeom->GetNumberOfModulesPhi(); iphi++ ) { // the number of micromegas modules in phi per PHOS module
- Float_t z = ( fGeom->GetCPVBoxSize(2) - fGeom->GetPPSDModuleSize(2) ) / 2. ;
-
- for ( Int_t iz = 1; iz <= fGeom->GetNumberOfModulesZ(); iz++ ) { // the number of micromegas modules in z per PHOS module
- gMC->Gspos("MPPS", ++copyNumbertop, "PPSD", x, yt, z, 0, "ONLY") ;
- gMC->Gspos("MPPS", ++copyNumberbot, "PPSD", x, yb, z, 0, "ONLY") ;
- z = z - fGeom->GetPPSDModuleSize(2) ;
- } // end of Z module loop
- x = x - fGeom->GetPPSDModuleSize(0) ;
- } // end of phi module loop
-
- // The Lead converter between two air gaps
- // 1. Upper air gap
-
- Float_t uappsd[3] ;
- uappsd[0] = fGeom->GetCPVBoxSize(0) / 2.0 ;
- uappsd[1] = fGeom->GetMicro1ToLeadGap() / 2.0 ;
- uappsd[2] = fGeom->GetCPVBoxSize(2) / 2.0 ;
-
- gMC->Gsvolu("UAPPSD", "BOX ", idtmed[798], uappsd, 3) ;
-
- y0 = ( fGeom->GetCPVBoxSize(1) - 2 * fGeom->GetMicromegas1Thickness() - fGeom->GetMicro1ToLeadGap() ) / 2. ;
-
- gMC->Gspos("UAPPSD", 1, "PPSD", 0.0, y0, 0.0, 0, "ONLY") ;
-
- // 2. Lead converter
-
- Float_t lcppsd[3] ;
- lcppsd[0] = fGeom->GetCPVBoxSize(0) / 2.0 ;
- lcppsd[1] = fGeom->GetLeadConverterThickness() / 2.0 ;
- lcppsd[2] = fGeom->GetCPVBoxSize(2) / 2.0 ;
-
- gMC->Gsvolu("LCPPSD", "BOX ", idtmed[712], lcppsd, 3) ;
+ // Put created EMC geometry into PHOS volume
- y0 = y0 - fGeom->GetMicro1ToLeadGap() / 2. - fGeom->GetLeadConverterThickness() / 2. ;
-
- gMC->Gspos("LCPPSD", 1, "PPSD", 0.0, y0, 0.0, 0, "ONLY") ;
-
- // 3. Lower air gap
-
- Float_t lappsd[3] ;
- lappsd[0] = fGeom->GetCPVBoxSize(0) / 2.0 ;
- lappsd[1] = fGeom->GetLeadToMicro2Gap() / 2.0 ;
- lappsd[2] = fGeom->GetCPVBoxSize(2) / 2.0 ;
-
- gMC->Gsvolu("LAPPSD", "BOX ", idtmed[798], lappsd, 3) ;
-
- y0 = y0 - fGeom->GetLeadConverterThickness() / 2. - fGeom->GetLeadToMicro2Gap() / 2. ;
+ z = geom->GetCPVBoxSize(1) / 2. ;
+ gMC->Gspos("PEMC", 1, "PHOS", 0., 0., z, 0, "ONLY") ;
- gMC->Gspos("LAPPSD", 1, "PPSD", 0.0, y0, 0.0, 0, "ONLY") ;
-
}
-
//____________________________________________________________________________
void AliPHOSv0::CreateGeometryforCPV()
{
// Create the PHOS-CPV geometry for GEANT
// Author: Yuri Kharlov 11 September 2000
-
//BEGIN_HTML
/*
<H2>
// Get pointer to the array containing media indexes
Int_t *idtmed = fIdtmed->GetArray() - 699 ;
-
+
+ AliPHOSGeometry * geom = GetGeometry() ;
+
// The box containing all CPV for one PHOS module filled with air
- par[0] = fGeom->GetCPVBoxSize(0) / 2.0 ;
- par[1] = fGeom->GetCPVBoxSize(1) / 2.0 ;
- par[2] = fGeom->GetCPVBoxSize(2) / 2.0 ;
- gMC->Gsvolu("CPV ", "BOX ", idtmed[798], par, 3) ;
-
- y = fGeom->GetOuterBoxSize(1) / 2.0 ;
- gMC->Gspos("CPV ", 1, "PHOS", 0.0, y, 0.0, 0, "ONLY") ;
+ par[0] = geom->GetCPVBoxSize(0) / 2.0 ;
+ par[1] = geom->GetCPVBoxSize(1) / 2.0 ;
+ par[2] = geom->GetCPVBoxSize(2) / 2.0 ;
+ gMC->Gsvolu("PCPV", "BOX ", idtmed[798], par, 3) ;
+
+ const Float_t * emcParams = geom->GetEMCAGeometry()->GetEMCParams() ;
+ z = - emcParams[3] ;
+ Int_t rotm ;
+ AliMatrix(rotm, 90.,0., 0., 0., 90., 90.) ;
+
+ gMC->Gspos("PCPV", 1, "PHOS", 0.0, 0.0, z, rotm, "ONLY") ;
// Gassiplex board
- par[0] = fGeom->GetGassiplexChipSize(0)/2.;
- par[1] = fGeom->GetGassiplexChipSize(1)/2.;
- par[2] = fGeom->GetGassiplexChipSize(2)/2.;
- gMC->Gsvolu("CPVC","BOX ",idtmed[707],par,3);
+ par[0] = geom->GetGassiplexChipSize(0)/2.;
+ par[1] = geom->GetGassiplexChipSize(1)/2.;
+ par[2] = geom->GetGassiplexChipSize(2)/2.;
+ gMC->Gsvolu("PCPC","BOX ",idtmed[707],par,3);
// Cu+Ni foil covers Gassiplex board
- par[1] = fGeom->GetCPVCuNiFoilThickness()/2;
- gMC->Gsvolu("CPVD","BOX ",idtmed[710],par,3);
- y = -(fGeom->GetGassiplexChipSize(1)/2 - par[1]);
- gMC->Gspos("CPVD",1,"CPVC",0,y,0,0,"ONLY");
+ par[1] = geom->GetCPVCuNiFoilThickness()/2;
+ gMC->Gsvolu("PCPD","BOX ",idtmed[710],par,3);
+ y = -(geom->GetGassiplexChipSize(1)/2 - par[1]);
+ gMC->Gspos("PCPD",1,"PCPC",0,y,0,0,"ONLY");
// Position of the chip inside CPV
- Float_t xStep = fGeom->GetCPVActiveSize(0) / (fGeom->GetNumberOfCPVChipsPhi() + 1);
- Float_t zStep = fGeom->GetCPVActiveSize(1) / (fGeom->GetNumberOfCPVChipsZ() + 1);
+ Float_t xStep = geom->GetCPVActiveSize(0) / (geom->GetNumberOfCPVChipsPhi() + 1);
+ Float_t zStep = geom->GetCPVActiveSize(1) / (geom->GetNumberOfCPVChipsZ() + 1);
Int_t copy = 0;
- y = fGeom->GetCPVFrameSize(1)/2 - fGeom->GetFTPosition(0) +
- fGeom->GetCPVTextoliteThickness() / 2 + fGeom->GetGassiplexChipSize(1) / 2 + 0.1;
- for (Int_t ix=0; ix<fGeom->GetNumberOfCPVChipsPhi(); ix++) {
- x = xStep * (ix+1) - fGeom->GetCPVActiveSize(0)/2;
- for (Int_t iz=0; iz<fGeom->GetNumberOfCPVChipsZ(); iz++) {
+ y = geom->GetCPVFrameSize(1)/2 - geom->GetFTPosition(0) +
+ geom->GetCPVTextoliteThickness() / 2 + geom->GetGassiplexChipSize(1) / 2 + 0.1;
+ for (Int_t ix=0; ix<geom->GetNumberOfCPVChipsPhi(); ix++) {
+ x = xStep * (ix+1) - geom->GetCPVActiveSize(0)/2;
+ for (Int_t iz=0; iz<geom->GetNumberOfCPVChipsZ(); iz++) {
copy++;
- z = zStep * (iz+1) - fGeom->GetCPVActiveSize(1)/2;
- gMC->Gspos("CPVC",copy,"CPV",x,y,z,0,"ONLY");
+ z = zStep * (iz+1) - geom->GetCPVActiveSize(1)/2;
+ gMC->Gspos("PCPC",copy,"PCPV",x,y,z,0,"ONLY");
}
}
// Foiled textolite (1 mm of textolite + 50 mkm of Cu + 6 mkm of Ni)
- par[0] = fGeom->GetCPVActiveSize(0) / 2;
- par[1] = fGeom->GetCPVTextoliteThickness() / 2;
- par[2] = fGeom->GetCPVActiveSize(1) / 2;
- gMC->Gsvolu("CPVF","BOX ",idtmed[707],par,3);
+ par[0] = geom->GetCPVActiveSize(0) / 2;
+ par[1] = geom->GetCPVTextoliteThickness() / 2;
+ par[2] = geom->GetCPVActiveSize(1) / 2;
+ gMC->Gsvolu("PCPF","BOX ",idtmed[707],par,3);
// Argon gas volume
- par[1] = (fGeom->GetFTPosition(2) - fGeom->GetFTPosition(1) - fGeom->GetCPVTextoliteThickness()) / 2;
- gMC->Gsvolu("CPVG","BOX ",idtmed[715],par,3);
+ par[1] = (geom->GetFTPosition(2) - geom->GetFTPosition(1) - geom->GetCPVTextoliteThickness()) / 2;
+ gMC->Gsvolu("PCPG","BOX ",idtmed[715],par,3);
for (Int_t i=0; i<4; i++) {
- y = fGeom->GetCPVFrameSize(1) / 2 - fGeom->GetFTPosition(i) + fGeom->GetCPVTextoliteThickness()/2;
- gMC->Gspos("CPVF",i+1,"CPV",0,y,0,0,"ONLY");
+ y = geom->GetCPVFrameSize(1) / 2 - geom->GetFTPosition(i) + geom->GetCPVTextoliteThickness()/2;
+ gMC->Gspos("PCPF",i+1,"PCPV",0,y,0,0,"ONLY");
if(i==1){
- y-= (fGeom->GetFTPosition(2) - fGeom->GetFTPosition(1)) / 2;
- gMC->Gspos("CPVG",1,"CPV ",0,y,0,0,"ONLY");
+ y-= (geom->GetFTPosition(2) - geom->GetFTPosition(1)) / 2;
+ gMC->Gspos("PCPG",1,"PCPV ",0,y,0,0,"ONLY");
}
}
// Dummy sensitive plane in the middle of argone gas volume
par[1]=0.001;
- gMC->Gsvolu("CPVQ","BOX ",idtmed[715],par,3);
- gMC->Gspos ("CPVQ",1,"CPVG",0,0,0,0,"ONLY");
+ gMC->Gsvolu("PCPQ","BOX ",idtmed[715],par,3);
+ gMC->Gspos ("PCPQ",1,"PCPG",0,0,0,0,"ONLY");
// Cu+Ni foil covers textolite
- par[1] = fGeom->GetCPVCuNiFoilThickness() / 2;
- gMC->Gsvolu("CPV1","BOX ",idtmed[710],par,3);
- y = fGeom->GetCPVTextoliteThickness()/2 - par[1];
- gMC->Gspos ("CPV1",1,"CPVF",0,y,0,0,"ONLY");
+ par[1] = geom->GetCPVCuNiFoilThickness() / 2;
+ gMC->Gsvolu("PCP1","BOX ",idtmed[710],par,3);
+ y = geom->GetCPVTextoliteThickness()/2 - par[1];
+ gMC->Gspos ("PCP1",1,"PCPF",0,y,0,0,"ONLY");
// Aluminum frame around CPV
- par[0] = fGeom->GetCPVFrameSize(0)/2;
- par[1] = fGeom->GetCPVFrameSize(1)/2;
- par[2] = fGeom->GetCPVBoxSize(2) /2;
- gMC->Gsvolu("CFR1","BOX ",idtmed[701],par,3);
+ par[0] = geom->GetCPVFrameSize(0)/2;
+ par[1] = geom->GetCPVFrameSize(1)/2;
+ par[2] = geom->GetCPVBoxSize(2) /2;
+ gMC->Gsvolu("PCF1","BOX ",idtmed[701],par,3);
- par[0] = fGeom->GetCPVBoxSize(0)/2 - fGeom->GetCPVFrameSize(0);
- par[1] = fGeom->GetCPVFrameSize(1)/2;
- par[2] = fGeom->GetCPVFrameSize(2)/2;
- gMC->Gsvolu("CFR2","BOX ",idtmed[701],par,3);
+ par[0] = geom->GetCPVBoxSize(0)/2 - geom->GetCPVFrameSize(0);
+ par[1] = geom->GetCPVFrameSize(1)/2;
+ par[2] = geom->GetCPVFrameSize(2)/2;
+ gMC->Gsvolu("PCF2","BOX ",idtmed[701],par,3);
for (Int_t j=0; j<=1; j++) {
- x = TMath::Sign(1,2*j-1) * (fGeom->GetCPVBoxSize(0) - fGeom->GetCPVFrameSize(0)) / 2;
- gMC->Gspos("CFR1",j+1,"CPV", x,0,0,0,"ONLY");
- z = TMath::Sign(1,2*j-1) * (fGeom->GetCPVBoxSize(2) - fGeom->GetCPVFrameSize(2)) / 2;
- gMC->Gspos("CFR2",j+1,"CPV",0, 0,z,0,"ONLY");
+ x = TMath::Sign(1,2*j-1) * (geom->GetCPVBoxSize(0) - geom->GetCPVFrameSize(0)) / 2;
+ gMC->Gspos("PCF1",j+1,"PCPV", x,0,0,0,"ONLY");
+ z = TMath::Sign(1,2*j-1) * (geom->GetCPVBoxSize(2) - geom->GetCPVFrameSize(2)) / 2;
+ gMC->Gspos("PCF2",j+1,"PCPV",0, 0,z,0,"ONLY");
+ }
+
+}
+
+
+//____________________________________________________________________________
+void AliPHOSv0::CreateGeometryforSupport()
+{
+ // Create the PHOS' support geometry for GEANT
+ //BEGIN_HTML
+ /*
+ <H2>
+ Geant3 geometry of the PHOS's support
+ </H2>
+ <P><CENTER>
+ <IMG Align=BOTTOM ALT="EMC geant tree" SRC="../images/PHOS_support.gif">
+ </CENTER><P>
+ */
+ //END_HTML
+
+ Float_t par[5], x0,y0,z0 ;
+ Int_t i,j,copy;
+
+ // Get pointer to the array containing media indexes
+ Int_t *idtmed = fIdtmed->GetArray() - 699 ;
+
+ AliPHOSGeometry * geom = GetGeometry() ;
+
+ // --- Dummy box containing two rails on which PHOS support moves
+ // --- Put these rails to the bottom of the L3 magnet
+
+ par[0] = geom->GetRailRoadSize(0) / 2.0 ;
+ par[1] = geom->GetRailRoadSize(1) / 2.0 ;
+ par[2] = geom->GetRailRoadSize(2) / 2.0 ;
+ gMC->Gsvolu("PRRD", "BOX ", idtmed[798], par, 3) ;
+
+ y0 = -(geom->GetRailsDistanceFromIP() - geom->GetRailRoadSize(1) / 2.0) ;
+ gMC->Gspos("PRRD", 1, "ALIC", 0.0, y0, 0.0, 0, "ONLY") ;
+
+ // --- Dummy box containing one rail
+
+ par[0] = geom->GetRailOuterSize(0) / 2.0 ;
+ par[1] = geom->GetRailOuterSize(1) / 2.0 ;
+ par[2] = geom->GetRailOuterSize(2) / 2.0 ;
+ gMC->Gsvolu("PRAI", "BOX ", idtmed[798], par, 3) ;
+
+ for (i=0; i<2; i++) {
+ x0 = (2*i-1) * geom->GetDistanceBetwRails() / 2.0 ;
+ gMC->Gspos("PRAI", i, "PRRD", x0, 0.0, 0.0, 0, "ONLY") ;
+ }
+
+ // --- Upper and bottom steel parts of the rail
+
+ par[0] = geom->GetRailPart1(0) / 2.0 ;
+ par[1] = geom->GetRailPart1(1) / 2.0 ;
+ par[2] = geom->GetRailPart1(2) / 2.0 ;
+ gMC->Gsvolu("PRP1", "BOX ", idtmed[716], par, 3) ;
+
+ y0 = - (geom->GetRailOuterSize(1) - geom->GetRailPart1(1)) / 2.0 ;
+ gMC->Gspos("PRP1", 1, "PRAI", 0.0, y0, 0.0, 0, "ONLY") ;
+ y0 = (geom->GetRailOuterSize(1) - geom->GetRailPart1(1)) / 2.0 - geom->GetRailPart3(1);
+ gMC->Gspos("PRP1", 2, "PRAI", 0.0, y0, 0.0, 0, "ONLY") ;
+
+ // --- The middle vertical steel parts of the rail
+
+ par[0] = geom->GetRailPart2(0) / 2.0 ;
+ par[1] = geom->GetRailPart2(1) / 2.0 ;
+ par[2] = geom->GetRailPart2(2) / 2.0 ;
+ gMC->Gsvolu("PRP2", "BOX ", idtmed[716], par, 3) ;
+
+ y0 = - geom->GetRailPart3(1) / 2.0 ;
+ gMC->Gspos("PRP2", 1, "PRAI", 0.0, y0, 0.0, 0, "ONLY") ;
+
+ // --- The most upper steel parts of the rail
+
+ par[0] = geom->GetRailPart3(0) / 2.0 ;
+ par[1] = geom->GetRailPart3(1) / 2.0 ;
+ par[2] = geom->GetRailPart3(2) / 2.0 ;
+ gMC->Gsvolu("PRP3", "BOX ", idtmed[716], par, 3) ;
+
+ y0 = (geom->GetRailOuterSize(1) - geom->GetRailPart3(1)) / 2.0 ;
+ gMC->Gspos("PRP3", 1, "PRAI", 0.0, y0, 0.0, 0, "ONLY") ;
+
+ // --- The wall of the cradle
+ // --- The wall is empty: steel thin walls and air inside
+
+ par[1] = TMath::Sqrt(TMath::Power((geom->GetIPtoCPVDistance() + geom->GetOuterBoxSize(3)),2) +
+ TMath::Power((geom->GetOuterBoxSize(1)/2),2))+10. ;
+ par[0] = par[1] - geom->GetCradleWall(1) ;
+ par[2] = geom->GetCradleWall(2) / 2.0 ;
+ par[3] = geom->GetCradleWall(3) ;
+ par[4] = geom->GetCradleWall(4) ;
+ gMC->Gsvolu("PCRA", "TUBS", idtmed[716], par, 5) ;
+
+ par[0] += geom->GetCradleWallThickness() ;
+ par[1] -= geom->GetCradleWallThickness() ;
+ par[2] -= geom->GetCradleWallThickness() ;
+ gMC->Gsvolu("PCRE", "TUBS", idtmed[798], par, 5) ;
+ gMC->Gspos ("PCRE", 1, "PCRA", 0.0, 0.0, 0.0, 0, "ONLY") ;
+
+ for (i=0; i<2; i++) {
+ z0 = (2*i-1) * (geom->GetOuterBoxSize(2) + geom->GetCradleWall(2) )/ 2.0 ;
+ gMC->Gspos("PCRA", i, "ALIC", 0.0, 0.0, z0, 0, "ONLY") ;
+ }
+
+ // --- The "wheels" of the cradle
+
+ par[0] = geom->GetCradleWheel(0) / 2;
+ par[1] = geom->GetCradleWheel(1) / 2;
+ par[2] = geom->GetCradleWheel(2) / 2;
+ gMC->Gsvolu("PWHE", "BOX ", idtmed[716], par, 3) ;
+
+ y0 = -(geom->GetRailsDistanceFromIP() - geom->GetRailRoadSize(1) -
+ geom->GetCradleWheel(1)/2) ;
+ for (i=0; i<2; i++) {
+ z0 = (2*i-1) * ((geom->GetOuterBoxSize(2) + geom->GetCradleWheel(2))/ 2.0 +
+ geom->GetCradleWall(2));
+ for (j=0; j<2; j++) {
+ copy = 2*i + j;
+ x0 = (2*j-1) * geom->GetDistanceBetwRails() / 2.0 ;
+ gMC->Gspos("PWHE", copy, "ALIC", x0, y0, z0, 0, "ONLY") ;
+ }
+ }
+
+}
+
+//_____________________________________________________________________________
+void AliPHOSv0::AddAlignableVolumes() const
+{
+ //
+ // Create entries for alignable volumes associating the symbolic volume
+ // name with the corresponding volume path. Needs to be syncronized with
+ // eventual changes in the geometry
+ // Alignable volumes are:
+ // 1) PHOS modules as a whole
+ // 2) Cradle
+ // 3) Cradle wheels
+ // 4) Strip units (group of 2x8 crystals)
+
+ TString volpath, symname;
+
+ // Alignable modules
+ // Volume path /ALIC_1/PHOS_<i> => symbolic name /PHOS/Module<i>, <i>=1,2,3,4,5
+
+ AliGeomManager::ELayerID idPHOS1 = AliGeomManager::kPHOS1;
+ AliGeomManager::ELayerID idPHOS2 = AliGeomManager::kPHOS2;
+ Int_t modUID, modnum = 0;
+ TString physModulePath="/ALIC_1/PHOS_";
+ TString symbModuleName="PHOS/Module";
+ Int_t nModules = GetGeometry()->GetNModules();
+
+ char im[5] ;
+ for(Int_t iModule=1; iModule<=nModules; iModule++){
+ sprintf(im,"%d",iModule) ;
+ modUID = AliGeomManager::LayerToVolUID(idPHOS1,modnum++);
+ if(strstr(GetTitle(),im)==0 && strcmp(GetTitle(),"IHEP")!=0 && strcmp(GetTitle(),"noCPV")!=0)
+ continue ;
+ volpath = physModulePath;
+ volpath += iModule;
+ // volpath += "/PEMC_1/PCOL_1/PTIO_1/PCOR_1/PAGA_1/PTII_1";
+
+ // Check the volume path if not all 5 modules exist
+ if (!gGeoManager->CheckPath(volpath.Data())) {
+ AliError(Form("Volume path %s not valid!",volpath.Data()));
+ continue;
+ }
+
+ symname = symbModuleName;
+ symname += iModule;
+ if(!gGeoManager->SetAlignableEntry(symname.Data(),volpath.Data(),modUID))
+ continue ;
+// AliFatal(Form("Alignable entry %s not created. Volume path %s not valid", symname.Data(),volpath.Data()));
+
+ // Creates the Tracking to Local transformation matrix for PHOS modules
+ TGeoPNEntry *alignableEntry = gGeoManager->GetAlignableEntryByUID(modUID) ;
+
+ Float_t angle = GetGeometry()->GetPHOSAngle(iModule);
+ TGeoHMatrix* globMatrix = alignableEntry->GetGlobalOrig();
+
+ TGeoHMatrix *matTtoL = new TGeoHMatrix;
+ matTtoL->RotateZ(-90.+angle);
+ matTtoL->MultiplyLeft(&(globMatrix->Inverse()));
+ alignableEntry->SetMatrix(matTtoL);
+ }
+
+ //Aligning of CPV should be done for volume PCPV_1
+ symbModuleName="PHOS/Module";
+ modnum=0;
+ for(Int_t iModule=1; iModule<=nModules; iModule++){
+ if(strstr(GetTitle(),"noCPV"))
+ continue ;
+ sprintf(im,"%d",iModule) ;
+ modUID = AliGeomManager::LayerToVolUID(idPHOS2,modnum++);
+ if(strstr(GetTitle(),im)==0 && strcmp(GetTitle(),"IHEP")!=0)
+ continue ;
+ volpath = physModulePath;
+ volpath += iModule;
+ volpath += "/PCPV_1";
+ // Check the volume path
+ if (!gGeoManager->CheckPath(volpath.Data())) {
+ AliError(Form("Volume path %s not valid!",volpath.Data()));
+ continue;
+ }
+
+ symname = symbModuleName;
+ symname += iModule;
+ symname += "/CPV";
+ if(!gGeoManager->SetAlignableEntry(symname.Data(),volpath.Data(),modUID))
+ AliFatal(Form("Alignable entry %s not created. Volume path %s not valid", symname.Data(),volpath.Data()));
+
+ // Creates the TGeo Local to Tracking transformation matrix ...
+ TGeoPNEntry *alignableEntry = gGeoManager->GetAlignableEntryByUID(modUID) ;
+
+ Float_t angle = GetGeometry()->GetPHOSAngle(iModule);
+ TGeoHMatrix* globMatrix = alignableEntry->GetGlobalOrig();
+
+ TGeoHMatrix *matTtoL = new TGeoHMatrix;
+ matTtoL->RotateZ(-90.+angle);
+ matTtoL->MultiplyLeft(&(globMatrix->Inverse()));
+ alignableEntry->SetMatrix(matTtoL);
+
}
+
+
+ // Alignable cradle walls
+ // Volume path /ALIC_1/PCRA_<i> => symbolic name /PHOS/Cradle<i>, <i>=0,1
+
+ TString physCradlePath="/ALIC_1/PCRA_";
+ TString symbCradleName="PHOS/Cradle";
+ Int_t nCradles = 2;
+
+ for(Int_t iCradle=0; iCradle<nCradles; iCradle++){
+ volpath = physCradlePath;
+ volpath += iCradle;
+ symname = symbCradleName;
+ symname += iCradle;
+ gGeoManager->SetAlignableEntry(symname.Data(),volpath.Data());
+ }
+
+ // Alignable wheels
+ // Volume path /ALIC_1/PWHE_<i> => symbolic name /PHOS/Wheel<i>, i=0,1,2,3
+
+ TString physWheelPath="/ALIC_1/PWHE_";
+ TString symbWheelName="PHOS/Wheel";
+ Int_t nWheels = 4;
+
+ for(Int_t iWheel=0; iWheel<nWheels; iWheel++){
+ volpath = physWheelPath;
+ volpath += iWheel;
+ symname = symbWheelName;
+ symname += iWheel;
+ gGeoManager->SetAlignableEntry(symname.Data(),volpath.Data());
+ }
+
+ //Physical strip path is a combination of: physModulePath + module number +
+ //physStripPath + strip number == ALIC_1/PHOS_N/..../PSTR_M
+ const Int_t nStripsX = GetGeometry()->GetEMCAGeometry()->GetNStripX();
+ const Int_t nStripsZ = GetGeometry()->GetEMCAGeometry()->GetNStripZ();
+ TString partialPhysStripName(100);
+ TString fullPhysStripName(100);
+ TString partialSymbStripName(100);
+ TString fullSymbStripName(100);
+
+ for(Int_t module = 1; module <= nModules; ++module){
+
+ sprintf(im,"%d",module) ;
+ if(strstr(GetTitle(),im)==0 && strcmp(GetTitle(),"IHEP")!=0 && strcmp(GetTitle(),"noCPV")!=0)
+ continue ;
+
+ volpath = physModulePath;
+ volpath += module;
+ // Check the volume path if not all 5 modules exist
+ if (!gGeoManager->CheckPath(volpath.Data())) {
+ AliError(Form("Volume path %s does not exist",volpath.Data())) ;
+ continue;
+ }
+ partialPhysStripName = physModulePath;
+ partialPhysStripName += module;
+ partialPhysStripName += "/PEMC_1/PCOL_1/PTIO_1/PCOR_1/PAGA_1/PTII_1/PSTR_";
+
+ partialSymbStripName = symbModuleName;
+ partialSymbStripName += module;
+ partialSymbStripName += "/Strip_";
+
+ for(Int_t i = 0, ind1D = 1; i < nStripsX; ++i){//ind1D starts from 1 (PSTR_1...PSTR_224...)
+ for(Int_t j = 0; j < nStripsZ; ++j, ++ind1D){
+ fullPhysStripName = partialPhysStripName;
+ fullPhysStripName += ind1D;
+
+ fullSymbStripName = partialSymbStripName;
+ fullSymbStripName += i;//ind1D;
+ fullSymbStripName += '_';
+ fullSymbStripName += j;
+
+ gGeoManager->SetAlignableEntry(fullSymbStripName.Data(), fullPhysStripName.Data());
+
+ // Creates the TGeo Local to Tracking transformation matrix ...
+ TGeoPNEntry *alignableEntry = gGeoManager->GetAlignableEntry(fullSymbStripName.Data()) ;
+ const char *path = alignableEntry->GetTitle();
+ if (!gGeoManager->cd(path))
+ AliFatal(Form("Volume path %s not valid!",path));
+ TGeoHMatrix matLtoT = *gGeoManager->GetCurrentMatrix() ;
+ Double_t refl[3]={-1.,-1.,-1.} ;
+ matLtoT.SetScale(refl) ;
+ TGeoHMatrix *matTtoL = new TGeoHMatrix(matLtoT.Inverse());
+
+ char phosPath[50] ;
+ sprintf(phosPath,"/ALIC_1/PHOS_%d",module) ;
+ if (!gGeoManager->cd(phosPath)){
+ AliFatal("Geo manager can not find path \n");
+ }
+ TGeoHMatrix *mPHOS = gGeoManager->GetCurrentMatrix();
+ if (mPHOS)
+ matTtoL->Multiply(mPHOS);
+ else{
+ AliFatal("Geo matrixes are not loaded \n") ;
+ }
+ //Switch y<->z
+ Double_t rot[9]={1.,0.,0., 0.,1.,0., 0.,0.,1.} ;
+ matTtoL->SetRotation(rot) ;
+ alignableEntry->SetMatrix(matTtoL);
+
+/*
+ //Check poisition of corner cell of the strip
+ AliPHOSGeometry * geom = AliPHOSGeometry::GetInstance() ;
+ Int_t relid[4] ;
+ relid[0] = module ;
+ relid[1] = 0 ;
+ Int_t iStrip=ind1D ;
+ Int_t icell=1 ;
+ Int_t raw = geom->GetEMCAGeometry()->GetNCellsXInStrip()*((iStrip-1)/geom->GetEMCAGeometry()->GetNStripZ()) +
+ 1 + (icell-1)/geom->GetEMCAGeometry()->GetNCellsZInStrip() ;
+ Int_t col = geom->GetEMCAGeometry()->GetNCellsZInStrip()*(1+(iStrip-1)%geom->GetEMCAGeometry()->GetNStripZ()) -
+ (icell-1)%geom->GetEMCAGeometry()->GetNCellsZInStrip() ;
+ if(col==0) col=geom->GetNZ() ;
+ relid[2] = raw ;
+ relid[3] = col ;
+ Float_t xG,zG ;
+ geom->RelPosInModule(relid, xG, zG) ;
+printf("============\n") ;
+printf("Geometry: x=%f, z=%f \n",xG,zG) ;
+ Int_t absid ;
+ geom->RelToAbsNumbering(relid,absid) ;
+ Double_t pos[3]= {-2.2*3.5,0.0,1.1}; //Position incide the strip (Y coordinalte is not important)
+ Double_t posC[3]={0.0,0.0,0.}; //Global position
+
+ matTtoL->MasterToLocal(pos,posC);
+printf("Matrix: x=%f, z=%f, y=%f \n",posC[0],posC[2],posC[1]) ;
+*/
+ }
+ }
+ }
}
+//____________________________________________________________________________
+Float_t AliPHOSv0::ZMin(void) const
+{
+ // Overall dimension of the PHOS (min)
+
+ AliPHOSGeometry * geom = GetGeometry() ;
+
+ return -geom->GetOuterBoxSize(2)/2.;
+}
+
+//____________________________________________________________________________
+Float_t AliPHOSv0::ZMax(void) const
+{
+ // Overall dimension of the PHOS (max)
+
+ AliPHOSGeometry * geom = GetGeometry() ;
+
+ return geom->GetOuterBoxSize(2)/2.;
+}
//____________________________________________________________________________
void AliPHOSv0::Init(void)
Int_t i;
- printf("\n");
- for(i=0;i<35;i++) printf("*");
- printf(" PHOS_INIT ");
- for(i=0;i<35;i++) printf("*");
- printf("\n");
+ if(AliLog::GetGlobalDebugLevel()>0) {
+ TString st ;
+ for(i=0;i<35;i++)
+ st += "*";
+ Info("Init", "%s", st.Data()) ;
+ // Here the PHOS initialisation code (if any!)
+
+ AliPHOSGeometry * geom = GetGeometry() ;
- // Here the PHOS initialisation code (if any!)
+ if (geom!=0)
+ Info("Init", "AliPHOS%s: PHOS geometry intialized for %s", Version().Data(), geom->GetName()) ;
+ else
+ Info("Init", "AliPHOS%s: PHOS geometry initialization failed !", Version().Data()) ;
- if (fGeom!=0)
- cout << "AliPHOS" << Version() << " : PHOS geometry intialized for " << fGeom->GetName() << endl ;
- else
- cout << "AliPHOS" << Version() << " : PHOS geometry initialization failed !" << endl ;
-
- for(i=0;i<80;i++) printf("*");
- printf("\n");
-
+ Info("Init", "%s", st.Data()) ;
+ }
}
-
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff