+++ /dev/null
-Bool_t kBackgroundMode = 0; // 0/1 = bkg subtraction (off/on)
-
-AliAnalysisDataContainer* cin_jet_cont = 0x0;
-
-void SetJetFinderExchangeContainer(AliAnalysisDataContainer* acont) {
- cin_jet_cont = acont;
-
-}
-
-AliAnalysisDataContainer* GetJetFinderExchangeContainer() {return cin_jet_cont;}
-
-AliJetFinder *CreateJetFinder(AliAnalysisDataContainer* contname,Char_t *jf,Float_t radius = -1);
-
-AliAnalysisTaskJetsFinder *AddTaskJetsFinder(AliAnalysisDataContainer* contname,Char_t *jf,Float_t radius = -1,Int_t iBack = 0); // for the new AF
-Int_t AddTaskJetsFinderDelta(AliAnalysisDataContainer* contname,char *nonStdFile = "",Bool_t kUseAODMC = kTRUE,UInt_t runFlag = 1|4|32|128|256);
-AliAnalysisTaskJetsFinder *AddTaskJetsFinder(AliAnalysisDataContainer* contname);
-
-AliAnalysisTaskJetsFinder *AddTaskJetsFinder(const char* contname,Char_t *jf = "", Float_t radius = 0.4,Int_t iBack = 0) // LEGO trains
-{
- AliAnalysisDataContainer* cont = ((AliAnalysisDataContainer*)AliAnalysisManager::GetAnalysisManager()->GetContainers()->FindObject(contname));
-
- if (jf != "") {
- return AddTaskJetsFinder(cont,jf,radius,iBack);
- } else {
- return AddTaskJetsFinder(cont);
- }
-
-}
-
-AliAnalysisTaskJetsFinder *AddTaskJetsFinder(AliAnalysisDataContainer* contname){
- // Reads the standard input "jets" branch in the AOD
- // UA1 as standard chosen, since it is the most robust and simple JF
- // R = 0.4 suffficient to provide accurate jet axis for correlation studies
- // energy resolution suffers a little
- // Acceptance of jets not limited by the Jet Finder but should be done
- // by user to abs(eta) < 0.5
-
-
- return AddTaskJetsFinder(contname,"UA1",0.4);
-
-
-}
-
-
-
-Int_t AddTaskJetsFinderDelta(AliAnalysisDataContainer* contname,char *nonStdFile,Bool_t kUseAODMC,UInt_t runFlag){
-
- // Adds a whole set of jet finders all to be written
- // to a delta AOD
-
- // this can in principle be done also with on the fly
- // if we have an ESD input jet fidner task does automatically fetch the ouput aod
-
-
- AliAnalysisManager *mgr = AliAnalysisManager::GetAnalysisManager();
- if (!mgr) {
- ::Error("AddTaskJetsFinderDelta", "No analysis manager to connect to.");
- return 0;
- }
-
-
- // Check the analysis type using the event handlers connected to the analysis manager.
- //==============================================================================
- if (!mgr->GetInputEventHandler()) {
- ::Error("AddTaskJetsFinderDelta", "This task requires an input event handler");
- return 0;
- }
-
-
- AliAODHandler *aodh = (AliAODHandler*)mgr->GetOutputEventHandler();
- if (!aodh) {
- ::Error("AddTaskJetsFinderDelta", "This task needs an output event handler");
- return 0;
- }
-
-
- TString outFile(nonStdFile);
-
-
- AliAnalysisTaskJetsFinder *taskjetsFinder = 0;
- Int_t iCount = 0;
-
- // Jet Fidners Selected by run flag first bit 2^0 second by 2^1 etc
- const char *cJF[14] = {"UA1","UA1","UA1", "CDF", "CDF","DA","DA","SISCONE","SISCONE","FASTJET","FASTJET","FASTKT","FASTKT","UA1LO"};
- const Float_t radius[14] = { 0.4, 0.7, 1.0, 0.4, 0.7, 0.4, 0.7, 0.4, 0.7, 0.4, 0.7, 0.4, 0.7, 0.4};
- UInt_t flag[14] = { 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7};
-
- // flag[5] = 0; // set siscone to 0 for proof mode...
- // flag first bit AOD, second bit AODMC2 third bit AODMC2 third (8) bit AOODMC2b (limited acceptance)
- // i.e. 7 all, 6 only MC2 and MC
- // this stay at three
-
-
-
-
- // for(int i = 0; i< 17;i++){
- for(int i = 0; i< 14;i++){
- if(!(runFlag&(1<<i)))continue;
- cout << ", cJF[" << i << "]: " << cJF[i] << ", radius[" << i << "]: " << radius[i] << endl;
- taskjetsFinder = AddTaskJetsFinder(contname,cJF[i],radius[i]);
- // if(i==4 || i==5) taskjetsFinder = AddTaskJetsFinder(cJF[i],radius[i]);
- // if(kMergeAODs)
- // To be commented for no pythia/hijing merging
- //taskjetsFinder->ReadAODFromOutput();
- // taskjetsFinder->SetDetConfig(1);
- // if(i==4 || i==5) taskjetsFinder->SetDetConfig(3);
- // else taskjetsFinder->SetDetConfig(1);
- cout << "taskjetsFinder: " << taskjetsFinder << endl;
- if(taskjetsFinder){
-
- char *cRadius = "";
- if(radius[i]>0)cRadius = Form("%02d",(int)((radius[i]+0.01)*10.)); // add an offset beacuse of precision
- cout << "cRadius: " << cRadius << endl;
- // taskjetsFinder->SetNonStdBranch(Form("jets%s_%s%s",cReader[ib],cJF[i],cRadius)); // done in addtask jets
- if(outFile.Length()>0)taskjetsFinder->SetNonStdOutputFile(outFile.Data());
- iCount++;
- }
- }
- Printf("Added %d JetFinders",iCount);
- return 0;
-}
-
-AliAnalysisTaskJetsFinder *AddTaskJetsFinder(AliAnalysisDataContainer* contname,Char_t *jf, Float_t radius,Int_t iBack)
-{
- // Creates a jet finder task, configures it and adds it to the analysis manager.
- kBackgroundMode = iBack;
-
- SetJetFinderExchangeContainer(contname);
-
- // Get the pointer to the existing analysis manager via the static access method.
- //==============================================================================
- AliAnalysisManager *mgr = AliAnalysisManager::GetAnalysisManager();
- if (!mgr) {
- ::Error("AddTaskJetsFinder", "No analysis manager to connect to.");
- return NULL;
- }
-
- // Check the analysis type using the event handlers connected to the analysis manager.
- //==============================================================================
- if (!mgr->GetInputEventHandler()) {
- ::Error("AddTaskJetsFinder", "This task requires an input event handler");
- return NULL;
- }
-
- AliAODHandler *aodh = (AliAODHandler*)mgr->GetOutputEventHandler();
- if (!aodh) {
- ::Error("AddTaskJetsFinder", "This task needs an output event handler");
- return NULL;
- }
-
-
- // Create the task and configure it.
- //===========================================================================
-
- Bool_t kIsreaderOptionsValid = 0;
- TString readerOptions = mgr->GetGlobalStr(cin_jet_cont->GetName(), kIsreaderOptionsValid);
- if(!kIsreaderOptionsValid) { ::Error("AddTaskJetsFinder", "This task needs a to be associated with a Jet Reader Task."); }
-
- AliAnalysisTaskJetsFinder *taskjetsFinder;
- // Define jet header and jet finder
- AliJetFinder *jetFinder = CreateJetFinder(contname,jf,radius);
-
- TString jr = readerOptions.Tokenize("#")->At(0)->GetName();
- TString cAdd = "";
- cAdd += Form("%02d",(int)((radius+0.01)*10.));
- cAdd += Form("_B%d",(int)((kBackgroundMode)));
- cAdd += readerOptions.Tokenize("#")->At(1)->GetName(); //returns Form("_Filter%05d_Cut%05d",filterMask,(int)((1000.*ptTrackMin)))
- Printf("%s",cAdd.Data());
-
- taskjetsFinder = new AliAnalysisTaskJetsFinder(Form("JetAnalysis%s_%s%s",jr.Data(),jf,cAdd.Data()));
-
- TString c_jr(jr);
- c_jr.ToLower();
- TString c_jf(jf);
- c_jf.ToLower();
-
-
- TString bName = Form("jets%s_%s%s",jr.Data(),jf,cAdd.Data());
- taskjetsFinder->SetNonStdBranch(bName.Data());
- Printf("Set jet branchname \"%s\"",bName.Data());
-
-
- // Connect jet finder to task.
- taskjetsFinder->SetJetFinder(jetFinder);
- taskjetsFinder->SetConfigFile("");
- taskjetsFinder->SetDebugLevel(-1);
- taskjetsFinder->SetFilterPt(0.1);
- //taskjetsFinder->SetBookAODBackground(1);
- mgr->AddTask(taskjetsFinder);
-
- cin_jet_cont = GetJetFinderExchangeContainer();
- if (! cin_jet_cont) { ::Error("AddTaskJetFinder", "This task needs an Exchange container and none were explicitly defined, taking the default one"); cin_jet_cont = mgr->GetContainers()->At(2); }
- if (! cin_jet_cont) { ::Error("AddTaskJetFinder", "This task needs an Exchange container"); return NULL;}
-
- AliAnalysisDataContainer *cout_jet = mgr->CreateContainer(Form("jethist_%s_%s%s",c_jr.Data(),c_jf.Data(),cAdd.Data()), TList::Class(),
- AliAnalysisManager::kOutputContainer, Form("%s:PWGJE_jethist_%s_%s%s",
- AliAnalysisManager::GetCommonFileName(),c_jr.Data(),c_jf.Data(),cAdd.Data()));
-
- // Create ONLY the output containers for the data produced by the task.
- // Get and connect other common input/output containers via the manager as below
- //==============================================================================
-
- mgr->ConnectInput (taskjetsFinder, 0, mgr->GetCommonInputContainer());
- mgr->ConnectInput (taskjetsFinder, 1, cin_jet_cont);
- mgr->ConnectOutput (taskjetsFinder, 0, mgr->GetCommonOutputContainer());
- mgr->ConnectOutput (taskjetsFinder, 1, cout_jet);
-
-
- return taskjetsFinder;
-}
-
-AliJetFinder *CreateJetFinder(AliAnalysisDataContainer* contname,Char_t *jf,Float_t radius){
- AliJetFinder *jetFinder = 0;
-
- switch (jf) {
- // CDF Jet finder ------------------------------------------------
- case "CDF":
- AliCdfJetHeader *jh = new AliCdfJetHeader();
- jh->SetRadius(0.7);
- if(radius>0)jh->SetRadius(radius);
- jh->SetAODwrite(kTRUE);
- jh->SetAODtracksWrite(kTRUE);
- jh->SetDebug(-1);
- jh->SetAnalyseJets(kTRUE);
- jetFinder = new AliCdfJetFinder();
- if (jh) jetFinder->SetJetHeader(jh);
- break;
-
- // DA Jet finder ------------------------------------------------
- case "DA":
- AliDAJetHeader *jh=new AliDAJetHeader();
- jh->SetComment("DA jet code with default parameters");
- jh->SelectJets(kTRUE);
- jh->SetDebug(-1);
- // jh->SetNeff(200);
- // jh->SetEtaEff(2.2);
- if(radius>0)jh->SetRadius(radius);
- jh->SetEtMin(5.);
- jh->SetFiducialEtaMin(-0.9);
- jh->SetFiducialEtaMax(0.9);
- jetFinder = new AliDAJetFinder();
- if (jh) jetFinder->SetJetHeader(jh);
- break;
-
- // Anti Kt Jet finder ------------------------------------------------
- case "FASTJET":
- // ANTI KT
- AliFastJetHeaderV1 *jh = new AliFastJetHeaderV1();
- jh->SetRparam(0.4); // setup parameters
- if(radius>0)jh->SetRparam(radius);
- jh->SetJetEtaMax(0.9 - radius);
- jh->SetJetEtaMin(-0.9 + radius);
- jh->SetJetPhiMin( 0.);
- jh->SetJetPhiMax(2.*TMath::Pi());
- jh->SetAlgorithm(2); // antikt from fastjet/JetDefinition.hh
- jh->SetDebug(-1);
- /*
- $FASTJET/include/fastjet/JetDefinition.hh
- enum JetAlgorithm {kt_algorithm, cambridge_algorithm,
- antikt_algorithm, genkt_algorithm,
- ee_kt_algorithm, ee_genkt_algorithm, ...};
-
- */
- jetFinder = new AliFastJetFinder();
- jh->SetPtMin(5);
- // Background
- jh->SetBGMode(kBackgroundMode);
- Double_t rBkg = 0.4;
- jh->SetBGAlgorithm(1);
- jh->SetRparamBkg(rBkg);
- jh->SetGhostEtaMax(0.9);
- jh->SetGhostArea(0.005); // area of a ghost
- jh->SetRapRange( -0.9+rBkg, 0.9-rBkg); // rapidity range for subtracting background must be < ghostmaxrap-0.95*R
- jh->SetPhiRange(0 , 2*TMath::Pi()); // phi range for subtracting background
-
- // Additional background
- jh->SetBkgFastJetb(1);
- jh->SetBkgFastJetWoHardest(1);
- if (jh) jetFinder->SetJetHeader(jh);
- break;
-
- // Fast Kt Jet finder ------------------------------------------------
- case "FASTKT":
- AliFastJetHeaderV1 *jh = new AliFastJetHeaderV1();
- jh->SetRparam(0.4); // setup parameters
- if(radius>0)jh->SetRparam(radius);
- jh->SetAlgorithm(0); // kt from fastjet/JetDefinition.hh
- jh->SetDebug(-1);
- jh->SetPtMin(5);
- jh->SetJetEtaMax(0.9 - radius);
- jh->SetJetEtaMin(-0.9 + radius);
- jh->SetJetPhiMin( 0.);
- jh->SetJetPhiMax(2.*TMath::Pi());
- // Background
- jh->SetBGMode(kBackgroundMode);
- jh->SetBGAlgorithm(1);
- Double_t rBkg = 0.4;
- jh->SetRparamBkg(rBkg);
- jh->SetGhostEtaMax(0.9);
- jh->SetGhostArea(0.005); // area of a ghost
- jh->SetRapRange( -0.9+rBkg, 0.9-rBkg); // rapidity range for subtracting background must be < ghostmaxrap-0.95*R
- jh->SetPhiRange(0 , 2*TMath::Pi()); // phi range for subtracting background
-
- jetFinder = new AliFastJetFinder();
- if (jh) jetFinder->SetJetHeader(jh);
- break;
-
- // SISCone Jet finder ------------------------------------------------
- case "SISCONE":
- AliSISConeJetHeader * jh = new AliSISConeJetHeader();
-
- //siscone parameters
- jh->SetConeRadius(0.4); // default cone radius
- if(radius>0)jh->SetConeRadius(radius); // cone radius
- jh->SetDebug(-1);
- jh->SetJetEtaMax(0.9 - radius);
- jh->SetJetEtaMin(-0.9 + radius);
- jh->SetJetPhiMin( 0.);
- jh->SetJetPhiMax(2.*TMath::Pi());
-
- jh->SetOverlapThreshold(0.75); // overlap parameter, between 0 and 1 excluded!! 0.75 value is advised
- jh->SetPtProtojetMin(0); // pt min of protojets
- jh->SetMinJetPt(5); // Ptmin of jets (GeV)
-
- // Background
- //do you want to subtract BG (0 = no, 1 = yes)
- jh->SetBGMode(kBackgroundMode);
-
- //for background
- Double_t rBkg = 0.4;
- jh->SetRapRange( -0.9+rBkg, 0.9-rBkg); // rapidity range for subtracting background must be < ghostmaxrap-0.95*R
- jh->SetPhiRange(0 , 2*TMath::Pi()); // phi range for subtracting background
-
- //to determine jets area
- jh->SetBGAlgorithm(1); // algorithm for rho calculation : 0 = kT, 1 = Cambridge
- jh->SetGhostEtaMax(0.9); // eta max where ghosts are generated
- jh->SetGhostArea(0.005); // area of a ghost
- jh->SetMeanGhostKt(1e-100); // average transverse momentum of the ghosts.
- jh->SetAreaTypeNumber(4); // from 1 to 5 : 1 = active_area, 2 = active_area_explicit_ghosts, 3 = one_ghost_passive_area, 4 = passive_area, 5 = voronoi_area
- jetFinder = new AliSISConeJetFinder();
- if (jh) jetFinder->SetJetHeader(jh);
- break;
-
- // UA1 Jet finder ------------------------------------------------
- case "UA1":
- AliUA1JetHeader *jh=new AliUA1JetHeader();
- jh->SetComment("UA1 jet code with default parameters");
- jh->SetRadius(0.4);
- if(radius>0)jh->SetRadius(radius);
- jh->SetDebug(-1);
- jh->SetEtSeed(2.);
- jh->SetNAcceptJets(6);
- jh->SetLegoNbinPhi(432);
- jh->SetLegoNbinEta(274);
- jh->SetLegoEtaMin(-0.9);
- jh->SetLegoEtaMax(+0.9);
- jh->SetMinJetEt(5.);
- jh->SetJetEtaMax(0.9 - radius);
- jh->SetJetEtaMin(-0.9 + radius);
- jh->SetJetPhiMin(0.);
- jh->SetJetPhiMax(2.*TMath::Pi());
- jh->BackgMode(kBackgroundMode);
-
- jetFinder = new AliUA1JetFinder();
- if (jh) jetFinder->SetJetHeader(jh);
- break;
-
- case "UA1LO":
- AliUA1JetHeader *jh=new AliUA1JetHeader();
- jh->SetComment("UA1 jet code with Lo Pt settings parameters");
- jh->BackgMode(kBackgroundMode);
- jh->SetRadius(0.4);
- if(radius>0)jh->SetRadius(radius);
- jh->SetDebug(-1);
- jh->SetEtSeed(1.);
- jh->SetNAcceptJets(6);
- jh->SetLegoNbinPhi(432);
- jh->SetLegoNbinEta(274);
- jh->SetLegoEtaMin(-2);
- jh->SetLegoEtaMax(+2);
- jh->SetMinJetEt(1.);
- jh->SetJetEtaMax(1.5);
- jh->SetJetEtaMin(-1.5);
-
- jetFinder = new AliUA1JetFinder();
- if (jh) jetFinder->SetJetHeader(jh);
- break;
-
- case "UA1MC":
- AliUA1JetHeader *jh=new AliUA1JetHeader();
- jh->SetComment("UA1 jet code with default MC parameters");
- jh->BackgMode(kBackgroundMode);
- jh->SetRadius(1.0);
- if(radius>0)jh->SetRadius(radius);
- jh->SetDebug(-1);
- jh->SetEtSeed(4.);
- jh->SetNAcceptJets(6);
- jh->SetLegoNbinPhi(432);
- jh->SetLegoNbinEta(274);
- jh->SetLegoEtaMin(-2);
- jh->SetLegoEtaMax(+2);
- jh->SetMinJetEt(5.);
- jh->SetJetEtaMax(1.5);
- jh->SetJetEtaMin(-1.5);
- jetFinder = new AliUA1JetFinder();
- if (jh) jetFinder->SetJetHeader(jh);
- break;
-
- default:
- ::Error("AddTaskJetsReader",Form("Wrong jet finder selected: %s\n",jf));
- return 0x0;
- break;
- }
-
- return jetFinder;
-
-}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff