* provided "as is" without express or implied warranty. *
**************************************************************************/
-/*
-$Log$
-*/
+/* $Id$ */
///////////////////////////////////////////////////////////////////////////////
// //
// //
///////////////////////////////////////////////////////////////////////////////
+#include <TVirtualMC.h>
+
+#include "AliConst.h"
#include "AliHALL.h"
+#include "AliMagF.h"
#include "AliRun.h"
-#include "AliConst.h"
+#include "AliLog.h"
ClassImp(AliHALL)
//
// Standard constructor for the experimental Hall
//
- SetMarkerColor(7);
- SetMarkerStyle(2);
- SetMarkerSize(0.4);
+ //PH SetMarkerColor(7);
+ //PH SetMarkerStyle(2);
+ //PH SetMarkerSize(0.4);
}
//_____________________________________________________________________________
Float_t r2;
- Float_t phid, phim, tpar[3], pbox[3], zfil_out, h, r, tspar[5];
+ Float_t phid, phim, pbox[3], h, r, tspar[5];
Float_t w1, dh, am, bm, dl,cm, hm, dr, dx, xl;
Int_t idrotm[1999];
Float_t trdpar[4], trapar[11], hullen;
- Float_t dz, phi, par[3], zfil_in;
+ Float_t phi;
Int_t *idtmed = fIdtmed->GetArray()-1899;
- //abs_d = 90.; // DEFINES DRIFT LENGTH
- //z_nose = 102.;
- //z_cone = 285.;
- //theta1 = 24.; // 1. angle defining the front absorber
- //theta2 = 5.; // 2. angle defining the front absorbe
- //acc_max = 9.; // ANGLE POLAIRE MAXIMUM
- //acc_min = 2.; // ANGLE POLAIRE MINIMUM DE DETECTION
- //abs_l = 503.;
- //d_steel = 1.; // THICKNESS OF STEEL SUPPORT
- //d_poly = 7.5;
- //d_pb = 2.5;
- //abs_cc = 315.; // DEFINES LENGTH OF CARBON
- //abs_c = 358.;
- //abs_s = 150.; // DEFINES W-SHIELD LENGTH
- //abs_n = 80.; // START OF NOSE
- //r_abs = 4.;
- //r_pb = .1;
- //epsilon = .01;
- //theta_r = 3.;
- //d_rear = 35.;
- //theta_open = .75;
-
- //z_l3 = 700.;
- //zmag_in = 725.;
- //zmag_out = 1225.;
- zfil_in = 1471.;
- zfil_out = 1591.;
- //zcon_in = 1900.;
- //zcon_out = 2e3;
- //zcone_e = 859.0875;
- //spec_l = 1800.;
- //zplug_in = 1780.;
- //zplug_out= 1900.;
-
- // Chamber position
- // CZ1=515.5
- //cz1 = 511.;
- //cz2 = 686.;
- //cz3 = 971.;
- //cz4 = 1245.;
- //cz5 = 1445.;
- //cz6 = 1610.;
- //cz7 = 1710.;
-
-
// RB24/26 TUNNEL FLOOR
r = 220.;
h = 140.;
phi = TMath::ACos(h / r);
xl = r * TMath::Sin(phi);
- dr = 100.;
+ dr = 1600.;
dh = dr * TMath::Cos(phi);
dl = dr * TMath::Sin(phi);
if (gAlice->GetModule("ZDC") == 0) {
// No ZDC
- hullen = 250.;
+ hullen = 370.;
} else {
// ZDC is present
- hullen = 6400.;
+ hullen = 6520.;
}
trdpar[0] = xl + dl;
trdpar[1] = xl;
AliMatrix(idrotm[1900], 90., 0., 0., 0., 90., 90.);
AliMatrix(idrotm[1901], 270., 0., 90., 90., 0., 0.);
gMC->Gsvolu("HUFL", "TRD1", idtmed[1956], trdpar, 4);
- r2 = hullen + 2020.;
- gMC->Gspos("HUFL", 1, "ALIC", 70.,-100-trdpar[3] , r2, idrotm[1900], "ONLY");
+ r2 = hullen + 1900.;
+ gMC->Gspos("HUFL", 1, "ALIC", 70.,-100-trdpar[3] , -r2, idrotm[1900], "ONLY");
// RB24/26 wall
tspar[3] = phid - 90.;
tspar[4] = 270. - phid;
gMC->Gsvolu("HUWA", "TUBS", idtmed[1956], tspar, 5);
- gMC->Gspos("HUWA", 1, "ALIC", 70., 40.,2020+hullen , 0, "ONLY");
-
- // tunnelplug
-
- tpar[0] = 0.;
- tpar[1] = 50.;
- tpar[2] = 60.;
- gMC->Gsvolu("HUP2", "TUBE", idtmed[1954], tpar, 3);
+ gMC->Gspos("HUWA", 1, "ALIC", 70., 40., -1900 - hullen , 0, "ONLY");
// END WALL
-
- pbox[0] = 1200.;
- pbox[1] = 1300.;
- pbox[2] = 60.;
- gMC->Gsvolu("HEW1", "BOX ", idtmed[1956], pbox, 3);
- gMC->Gspos("HUP2", 1, "HEW1", 0.,-404., 0., 0, "ONLY");
- gMC->Gspos("HEW1", 1, "ALIC", 0., 404., 1960, 0, "ONLY");
-
+ //gMC->Gsvolu("HEW1", "BOX ", idtmed[1956], pbox, 0);
+ //pbox[0] = 600.;
+ //pbox[1] = 418.;
+ //pbox[2] = 60.;
+ //gMC->Gsposp("HEW1", 1, "ALIC", 0., -pbox[1]-60., -1960, 0, "ONLY", pbox, 3);
+ //pbox[1] = 822.;
+ //gMC->Gsposp("HEW1", 2, "ALIC", 0., pbox[1]+60., -1960, 0, "ONLY", pbox, 3);
+ //pbox[0] = 270.;
+ //pbox[1] = 60.;
+ //gMC->Gsposp("HEW1", 3, "ALIC", pbox[0]+60., 0. , -1960, 0, "ONLY", pbox, 3);
+ //gMC->Gsposp("HEW1", 4, "ALIC", -pbox[0]-60., 0. , -1960, 0, "ONLY", pbox, 3);
+
// hall floor
phid = 16.197;
// pillars for working platform
pbox[0] = 40.;
- pbox[1] = 120.;
+ pbox[1] = 96.;
pbox[2] = 550.;
gMC->Gsvolu("HPIL", "BOX ", idtmed[1956], pbox, 3);
- gMC->Gspos("HPIL", 1, "ALIC", 165.,-706+pbox[1] , 1350., 0, "ONLY");
- gMC->Gspos("HPIL", 2, "ALIC",-165.,-706+pbox[1] , 1350., 0, "ONLY");
-
- // concrete beam shield
-
- pbox[0] = 402.5;
- pbox[1] = 260.;
- pbox[2] = 120.;
- gMC->Gsvolu("HMBS", "BOX ", idtmed[1956], pbox, 3);
- pbox[0] = 85.;
- pbox[1] = 100.;
- gMC->Gsvolu("HBBS", "BOX ", idtmed[1956], pbox, 3);
- gMC->Gspos("HBBS", 1, "HMBS", -157.5, 0., 0., 0, "ONLY");
- pbox[0] = 40.;
- pbox[1] = 130.;
- gMC->Gsvolu("HPBS", "BOX ", idtmed[1956], pbox, 3);
- gMC->Gspos("HPBS", 1, "HMBS", 202.5, 30., 0., 0, "ONLY");
- gMC->Gspos("HMBS", 1, "ALIC", 157.5, -50., -820., 0, "ONLY");
-
- // MUON FILTER
- par[0] = 30.;
- par[1] = 310.;
- par[2] = (zfil_out - zfil_in) / 2.;
- gMC->Gsvolu("HXFI", "TUBE", idtmed[1949], par, 3);
- dz = (zfil_in + zfil_out) / 2.;
- par[2] -= 10.;
- gMC->Gsvolu("HXII", "TUBE", idtmed[1909], par, 3);
- gMC->Gspos("HXII", 1, "HXFI", 0., 0., 0., 0, "ONLY");
- gMC->Gspos("HXFI", 1, "ALIC", 0., 0., dz, 0, "ONLY");
+ gMC->Gspos("HPIL", 1, "ALIC", 165.,-706+pbox[1] , -1350., 0, "ONLY");
+ gMC->Gspos("HPIL", 2, "ALIC",-165.,-706+pbox[1] , -1350., 0, "ONLY");
+
+ // simple concrete beam shield
+
+ Float_t ppgon[10];
+ ppgon[0] = 45.;
+ ppgon[1] = 360.;
+ ppgon[2] = 4.;
+ ppgon[3] = 2.;
+ ppgon[7] = 1800.;
+ ppgon[8] = 150.;
+ ppgon[9] = 250.;
+ ppgon[4] = 720.;
+ ppgon[5] = 150.;
+ ppgon[6] = 250.;
+
+ gMC->Gsvolu("HMBS", "PGON", idtmed[1956], ppgon, 10);
+ gMC->Gspos("HMBS", 1, "ALIC", 0., 70., 0., 0, "ONLY");
}
//_____________________________________________________________________________
//
// Create materials for the experimental hall
//
-
-
- Int_t ISXFLD = gAlice->Field()->Integ();
- Float_t SXMGMX = gAlice->Field()->Max();
+
+ Int_t isxfld = 0;
+ Float_t sxmgmx = gAlice->Field()->Max();
Float_t aconc[10] = { 1.,12.01,15.994,22.99,24.305,26.98,28.086,39.1,40.08,55.85 };
Float_t zconc[10] = { 1.,6.,8.,11.,12.,13.,14.,19.,20.,26. };
Float_t wconc[10] = { .01,.001,.529107,.016,.002,.033872,.337021,.013,.044,.014 };
+ Float_t aAir[4]={12.0107,14.0067,15.9994,39.948};
+ Float_t zAir[4]={6.,7.,8.,18.};
+ Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827};
+ Float_t dAir = 1.20479E-3;
+
Float_t epsil, stmin, deemax, tmaxfd, stemax;
// FOR CONCRETE
- AliMaterial(10, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1);
- AliMaterial(30, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1);
- AliMaterial(50, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1);
- AliMaterial(15, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500);
- AliMaterial(35, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500);
- AliMaterial(55, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500);
- AliMixture(17, "CONCRETE$", aconc, zconc, 2.35, 10, wconc);
- AliMixture(37, "CONCRETE$", aconc, zconc, 2.35, 10, wconc);
- AliMixture(57, "CONCRETE$", aconc, zconc, 2.35, 10, wconc);
+ AliMaterial(10, "IRON0$ ", 55.85, 26., 7.87, 1.76, 17.1);
+ AliMaterial(30, "IRON1$ ", 55.85, 26., 7.87, 1.76, 17.1);
+ AliMaterial(50, "IRON2$ ", 55.85, 26., 7.87, 1.76, 17.1);
+
+ AliMixture(15, "AIR0$ ", aAir, zAir, dAir, 4, wAir);
+ AliMixture(35, "AIR1$ ", aAir, zAir, dAir, 4, wAir);
+ AliMixture(55, "AIR2$ ", aAir, zAir, dAir, 4, wAir);
+
+ AliMixture(17, "CONCRETE0$", aconc, zconc, 2.35, 10, wconc);
+ AliMixture(37, "CONCRETE1$", aconc, zconc, 2.35, 10, wconc);
+ AliMixture(57, "CONCRETE2$", aconc, zconc, 2.35, 10, wconc);
// ****************
// Defines tracking media parameters.
// IRON
- AliMedium(10, "FE_C0 ", 10, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(30, "FE_C1 ", 30, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(50, "FE_C2 ", 50, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(10, "FE_C0 ", 10, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(30, "FE_C1 ", 30, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(50, "FE_C2 ", 50, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
// Air
- AliMedium(15, "AIR_C0 ", 15, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(35, "AIR_C1 ", 35, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(55, "AIR_C2 ", 55, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(15, "AIR_C0 ", 15, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(35, "AIR_C1 ", 35, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(55, "AIR_C2 ", 55, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
// Concrete
- AliMedium(17, "CC_C0 ", 17, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(37, "CC_C1 ", 37, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(57, "CC_C2 ", 57, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(17, "CC_C0 ", 17, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(37, "CC_C1 ", 37, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(57, "CC_C2 ", 57, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
}
//_____________________________________________________________________________
//
Int_t i;
//
- printf("\n");
- for(i=0;i<35;i++) printf("*");
- printf(" HALL_INIT ");
- for(i=0;i<35;i++) printf("*");
- printf("\n");
- //
- // Here the HALL initialisation code (if any!)
- for(i=0;i<80;i++) printf("*");
- printf("\n");
+ if(AliLog::GetGlobalDebugLevel()>0) {
+ printf("\n%s: ",ClassName());
+ for(i=0;i<35;i++) printf("*");
+ printf(" HALL_INIT ");
+ for(i=0;i<35;i++) printf("*");
+ printf("\n%s: ",ClassName());
+ //
+ // Here the HALL initialisation code (if any!)
+ for(i=0;i<80;i++) printf("*");
+ printf("\n");
+ }
}
//_____________________________________________________________________________
-void AliHALL::DrawModule()
+void AliHALL::DrawModule() const
{
//
// Draw a shaded view of Experimental Hall
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff