/*
$Log$
-Revision 1.13 1999/11/01 20:41:57 fca
+Revision 1.16 2000/05/10 16:52:18 vicinanz
+New TOF version with holes for PHOS/RICH
+
+Revision 1.14.2.1 2000/05/10 09:37:16 vicinanz
+New version with Holes for PHOS/RICH
+
+Revision 1.14 1999/11/05 22:39:06 fca
+New hits structure
+
+Revision 1.13 1999/11/02 11:26:39 fca
+added stdlib.h for exit
+
+Revision 1.12 1999/11/01 20:41:57 fca
Added protections against using the wrong version of FRAME
-Revision 1.12 1999/10/22 08:04:14 fca
+Revision 1.11 1999/10/22 08:04:14 fca
Correct improper use of negative parameters
-Revision 1.11 1999/10/16 19:30:05 fca
+Revision 1.10 1999/10/16 19:30:06 fca
Corrected Rotation Matrix and CVS log
-Revision 1.10 1999/10/15 15:35:20 fca
+Revision 1.9 1999/10/15 15:35:20 fca
New version for frame1099 with and without holes
-Revision 1.9 1999/09/29 09:24:33 fca
+Revision 1.8 1999/09/29 09:24:33 fca
Introduction of the Copyright and cvs Log
*/
///////////////////////////////////////////////////////////////////////////////
// //
-// Time Of Flight: design of C.Williams FCA //
+// Time Of Flight: design of C.Williams
+//
// This class contains the functions for version 1 of the Time Of Flight //
// detector. //
//
// VERSION WITH 5 MODULES AND TILTED STRIPS
//
-// WITH HOLES FOR PHOS AND HMPID inside the
-// SPACE FRAME WITH HOLES
-//
+// HOLES FOR PHOS DETECTOR
//
// Authors:
-//
+//
// Alessio Seganti
// Domenico Vicinanza
//
#include <stdlib.h>
#include "AliTOFv1.h"
+#include "TBRIK.h"
+#include "TNode.h"
+#include "TObject.h"
#include "AliRun.h"
#include "AliConst.h"
+
ClassImp(AliTOFv1)
//_____________________________________________________________________________
AliTOFv1::AliTOFv1(const char *name, const char *title)
- : AliTOF(name,title)
+ : AliTOF(name,title)
{
//
// Standard constructor
//
+ //
+ // Check that FRAME is there otherwise we have no place where to
+ // put TOF
+ AliModule* FRAME=gAlice->GetModule("FRAME");
+ if(!FRAME) {
+ Error("Ctor","TOF needs FRAME to be present\n");
+ exit(1);
+ } else
+ if(FRAME->IsVersion()!=1) {
+ Error("Ctor","FRAME version 1 needed with this version of TOF\n");
+ exit(1);
+ }
+
+
+
}
+
+//_____________________________________________________________________________
+void AliTOFv1::BuildGeometry()
+{
+ //
+ // Build TOF ROOT geometry for the ALICE event display
+ //
+ TNode *Node, *Top;
+ const int kColorTOF = 27;
+
+ // Find top TNODE
+ Top = gAlice->GetGeometry()->GetNode("alice");
+
+ // Position the different copies
+ const Float_t rTof =(fRmax+fRmin)/2;
+ const Float_t hTof = fRmax-fRmin;
+ const Int_t fNTof = 18;
+ const Float_t kPi = TMath::Pi();
+ const Float_t angle = 2*kPi/fNTof;
+ Float_t ang;
+
+ // Define TOF basic volume
+
+ char NodeName0[7], NodeName1[7], NodeName2[7];
+ char NodeName3[7], NodeName4[7], RotMatNum[7];
+
+ new TBRIK("S_TOF_C","TOF box","void",
+ 120*0.5,hTof*0.5,fZlenC*0.5);
+ new TBRIK("S_TOF_B","TOF box","void",
+ 120*0.5,hTof*0.5,fZlenB*0.5);
+ new TBRIK("S_TOF_A","TOF box","void",
+ 120*0.5,hTof*0.5,fZlenA*0.5);
+
+ for (Int_t NodeNum=1;NodeNum<19;NodeNum++){
+
+ if (NodeNum<10) {
+ sprintf(RotMatNum,"rot50%i",NodeNum);
+ sprintf(NodeName0,"FTO00%i",NodeNum);
+ sprintf(NodeName1,"FTO10%i",NodeNum);
+ sprintf(NodeName2,"FTO20%i",NodeNum);
+ sprintf(NodeName3,"FTO30%i",NodeNum);
+ sprintf(NodeName4,"FTO40%i",NodeNum);
+ }
+ if (NodeNum>9) {
+ sprintf(RotMatNum,"rot5%i",NodeNum);
+ sprintf(NodeName0,"FTO0%i",NodeNum);
+ sprintf(NodeName1,"FTO1%i",NodeNum);
+ sprintf(NodeName2,"FTO2%i",NodeNum);
+ sprintf(NodeName3,"FTO3%i",NodeNum);
+ sprintf(NodeName4,"FTO4%i",NodeNum);
+ }
+
+ new TRotMatrix(RotMatNum,RotMatNum,90,-20*NodeNum,90,90-20*NodeNum,0,0);
+ ang = (4.5-NodeNum) * angle;
+
+ Top->cd();
+ Node = new TNode(NodeName0,NodeName0,"S_TOF_C",rTof*TMath::Cos(ang),rTof*TMath::Sin(ang),299.15,RotMatNum);
+ Node->SetLineColor(kColorTOF);
+ fNodes->Add(Node);
+
+ Top->cd();
+ Node = new TNode(NodeName1,NodeName1,"S_TOF_C",rTof*TMath::Cos(ang),rTof*TMath::Sin(ang),-299.15,RotMatNum);
+ Node->SetLineColor(kColorTOF);
+ fNodes->Add(Node);
+
+ Top->cd();
+ Node = new TNode(NodeName2,NodeName2,"S_TOF_B",rTof*TMath::Cos(ang),rTof*TMath::Sin(ang),146.45,RotMatNum);
+ Node->SetLineColor(kColorTOF);
+ fNodes->Add(Node);
+
+ Top->cd();
+ Node = new TNode(NodeName3,NodeName3,"S_TOF_B",rTof*TMath::Cos(ang),rTof*TMath::Sin(ang),-146.45,RotMatNum);
+ Node->SetLineColor(kColorTOF);
+ fNodes->Add(Node);
+
+if (NodeNum<8 || NodeNum>12) {
+ Top->cd();
+ Node = new TNode(NodeName4,NodeName4,"S_TOF_A",rTof*TMath::Cos(ang),rTof*TMath::Sin(ang),0.,RotMatNum);
+ Node->SetLineColor(kColorTOF);
+ fNodes->Add(Node);
+ } // Modules A which are not to be installed for PHOS holes.
+ }
+}
+
+
//_____________________________________________________________________________
void AliTOFv1::CreateGeometry()
}
//_____________________________________________________________________________
-void AliTOFv1::TOFpc(Float_t xtof, Float_t ytof, Float_t zlen1,
- Float_t zlen2, Float_t zlen3, Float_t ztof0)
+void AliTOFv1::TOFpc(Float_t xtof, Float_t ytof, Float_t zlenC,
+ Float_t zlenB, Float_t zlenA, Float_t ztof0)
{
//
// Definition of the Time Of Fligh Resistive Plate Chambers
// xFLT, yFLT, zFLT - sizes of TOF modules (large)
- Float_t ycoor;
- Float_t par[10];
- Int_t idrotm[100];
- Int_t nrot = 0;
+ Float_t ycoor, zcoor;
+ Float_t par[10];
+ Int_t *idtmed = fIdtmed->GetArray()-499;
+ Int_t idrotm[100];
+ Int_t nrot = 0;
+ Float_t hTof = fRmax-fRmin;
- Int_t *idtmed = fIdtmed->GetArray()-499;
-
+ Float_t Radius = fRmin+2.;//cm
- par[0] = xtof / 2.;
- par[1] = ytof / 2.;
- par[2] = zlen1 / 2.;
- gMC->Gsvolu("FTO1", "BOX ", idtmed[506], par, 3);
- par[2] = zlen2 / 2.;
- gMC->Gsvolu("FTO2", "BOX ", idtmed[506], par, 3);
- par[2] = zlen3 / 2.;
- gMC->Gsvolu("FTO3", "BOX ", idtmed[506], par, 3);
+ par[0] = xtof * 0.5;
+ par[1] = ytof * 0.5;
+ par[2] = zlenC * 0.5;
+ gMC->Gsvolu("FTOC", "BOX ", idtmed[506], par, 3);
+ par[2] = zlenB * 0.5;
+ gMC->Gsvolu("FTOB", "BOX ", idtmed[506], par, 3);
+ par[2] = zlenA * 0.5;
+ gMC->Gsvolu("FTOA", "BOX ", idtmed[506], par, 3);
// Positioning of modules
- Float_t zcoor;
-
- Float_t zcor1 = ztof0 - zlen1/2;
- Float_t zcor2 = ztof0 - zlen1 - zlen2/2.;
+ Float_t zcor1 = ztof0 - zlenC*0.5;
+ Float_t zcor2 = ztof0 - zlenC - zlenB*0.5;
Float_t zcor3 = 0.;
- AliMatrix(idrotm[0], 90., 0., 0., 0., 90, -90.);
- AliMatrix(idrotm[1], 90., 180., 0., 0., 90, 90.);
- gMC->Gspos("FTO1", 1, "BTO1", 0, zcor1, 0, idrotm[0], "ONLY");
- gMC->Gspos("FTO1", 2, "BTO1", 0, -zcor1, 0, idrotm[1], "ONLY");
- zcoor = (zlen1/2.);
- gMC->Gspos("FTO1", 1, "BTO2", 0, zcoor, 0, idrotm[0], "ONLY");
- zcoor = 0.;
- gMC->Gspos("FTO1", 1, "BTO3", 0, zcoor, 0, idrotm[0], "ONLY");
-
- gMC->Gspos("FTO2", 1, "BTO1", 0, zcor2, 0, idrotm[0], "ONLY");
- gMC->Gspos("FTO2", 2, "BTO1", 0, -zcor2, 0, idrotm[1], "ONLY");
- zcoor = -zlen2/2.;
- gMC->Gspos("FTO2", 0, "BTO2", 0, zcoor, 0, idrotm[0], "ONLY");
-
- gMC->Gspos("FTO3", 0, "BTO1", 0, zcor3, 0, idrotm[0], "ONLY");
-
-// Subtraction the distance to TOF module boundaries
+ AliMatrix(idrotm[0], 90., 0., 0., 0., 90,-90.);
+ AliMatrix(idrotm[1], 90.,180., 0., 0., 90, 90.);
+ gMC->Gspos("FTOC", 1, "BTO1", 0, zcor1, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOC", 2, "BTO1", 0, -zcor1, 0, idrotm[1], "ONLY");
+ gMC->Gspos("FTOC", 1, "BTO2", 0, zcor1, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOC", 2, "BTO2", 0, -zcor1, 0, idrotm[1], "ONLY");
+ gMC->Gspos("FTOC", 1, "BTO3", 0, zcor1, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOC", 2, "BTO3", 0, -zcor1, 0, idrotm[1], "ONLY");
+
+ gMC->Gspos("FTOB", 1, "BTO1", 0, zcor2, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOB", 2, "BTO1", 0, -zcor2, 0, idrotm[1], "ONLY");
+ gMC->Gspos("FTOB", 1, "BTO2", 0, zcor2, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOB", 2, "BTO2", 0, -zcor2, 0, idrotm[1], "ONLY");
+ gMC->Gspos("FTOB", 1, "BTO3", 0, zcor2, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOB", 2, "BTO3", 0, -zcor2, 0, idrotm[1], "ONLY");
+
+ gMC->Gspos("FTOA", 0, "BTO1", 0, zcor3, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOA", 0, "BTO3", 0, zcor3, 0, idrotm[0], "ONLY");
+
+ Float_t db = 0.5;//cm
+ Float_t xFLT, xFST, yFLT, zFLTA, zFLTB, zFLTC;
+
+ xFLT = fStripLn;
+ yFLT = ytof;
+ zFLTA = zlenA;
+ zFLTB = zlenB;
+ zFLTC = zlenC;
- Float_t db = 7.;
- Float_t xFLT, yFLT, zFLT1, zFLT2, zFLT3;
+ xFST = xFLT-fDeadBndX*2;//cm
- xFLT = xtof -(.5 +.5)*2;
- yFLT = ytof;
- zFLT1 = zlen1 - db;
- zFLT2 = zlen2 - db;
- zFLT3 = zlen3 - db;
-
// Sizes of MRPC pads
- Float_t yPad = 0.505;
+ Float_t yPad = 0.505;//cm
// Large not sensitive volumes with CO2
- par[0] = xFLT/2;
- par[1] = yFLT/2;
+ par[0] = xFLT*0.5;
+ par[1] = yFLT*0.5;
cout <<"************************* TOF geometry **************************"<<endl;
- par[2] = (zFLT1 / 2.);
- gMC->Gsvolu("FLT1", "BOX ", idtmed[506], par, 3); // CO2
- gMC->Gspos("FLT1", 0, "FTO1", 0., 0., 0., 0, "ONLY");
+ par[2] = (zFLTA *0.5);
+ gMC->Gsvolu("FLTA", "BOX ", idtmed[506], par, 3); // CO2
+ gMC->Gspos ("FLTA", 0, "FTOA", 0., 0., 0., 0, "ONLY");
- par[2] = (zFLT2 / 2.);
- gMC->Gsvolu("FLT2", "BOX ", idtmed[506], par, 3); // CO2
- gMC->Gspos("FLT2", 0, "FTO2", 0., 0., 0., 0, "ONLY");
+ par[2] = (zFLTB * 0.5);
+ gMC->Gsvolu("FLTB", "BOX ", idtmed[506], par, 3); // CO2
+ gMC->Gspos ("FLTB", 0, "FTOB", 0., 0., 0., 0, "ONLY");
- par[2] = (zFLT3 / 2.);
- gMC->Gsvolu("FLT3", "BOX ", idtmed[506], par, 3); // CO2
- gMC->Gspos("FLT3", 0, "FTO3", 0., 0., 0., 0, "ONLY");
+ par[2] = (zFLTC * 0.5);
+ gMC->Gsvolu("FLTC", "BOX ", idtmed[506], par, 3); // CO2
+ gMC->Gspos ("FLTC", 0, "FTOC", 0., 0., 0., 0, "ONLY");
////////// Layers before detector ////////////////////
-// Alluminium layer in front 1.0 mm thick at the beginning
+// MYlar layer in front 1.0 mm thick at the beginning
par[0] = -1;
- par[1] = 0.1;
+ par[1] = 0.1;//cm
par[2] = -1;
ycoor = -yFLT/2 + par[1];
- gMC->Gsvolu("FMY1", "BOX ", idtmed[508], par, 3); // Alluminium
- gMC->Gspos("FMY1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FMY2", "BOX ", idtmed[508], par, 3); // Alluminium
- gMC->Gspos("FMY2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FMY3", "BOX ", idtmed[508], par, 3); // Alluminium
- gMC->Gspos("FMY3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
-
-// Honeycomb layer (1cm of special polyethilene)
+ gMC->Gsvolu("FMYA", "BOX ", idtmed[508], par, 3); // Alluminium
+ gMC->Gspos ("FMYA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FMYB", "BOX ", idtmed[508], par, 3); // Alluminium
+ gMC->Gspos ("FMYB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FMYC", "BOX ", idtmed[508], par, 3); // Alluminium
+ gMC->Gspos ("FMYC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
+
+// honeycomb (special Polyethilene Layer of 1cm)
ycoor = ycoor + par[1];
par[0] = -1;
- par[1] = 0.5;
+ par[1] = 0.5;//cm
par[2] = -1;
ycoor = ycoor + par[1];
- gMC->Gsvolu("FPL1", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FPL1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FPL2", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FPL2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FPL3", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FPL3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FPLA", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FPLA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FPLB", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FPLB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FPLC", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FPLC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
///////////////// Detector itself //////////////////////
- const Float_t StripWidth = 7.81;//cm
- const Float_t DeadBound = 1.;//cm non-sensitive between the pad edge and the boundary of the strip
- const Int_t nx = 40; // number of pads along x
- const Int_t nz = 2; // number of pads along z
- const Float_t Gap=4.; //cm distance between the strip axis
- const Float_t Space = 5.5; //cm distance from the front plate of the box
+ const Float_t DeadBound = fDeadBndZ; //cm non-sensitive between the pad edge
+ //and the boundary of the strip
+ const Int_t nx = fNpadX; // number of pads along x
+ const Int_t nz = fNpadZ; // number of pads along z
+ const Float_t Space = fSpace; //cm distance from the front plate of the box
- Float_t zSenStrip;
- zSenStrip = StripWidth-2*DeadBound;//cm
+ Float_t zSenStrip = fZpad*fNpadZ;//cm
+ Float_t StripWidth = zSenStrip + 2*DeadBound;
- par[0] = xFLT/2;
- par[1] = yPad/2;
- par[2] = StripWidth/2.;
+ par[0] = xFLT*0.5;
+ par[1] = yPad*0.5;
+ par[2] = StripWidth*0.5;
- // Glass Layer of detector
+ // glass layer of detector STRip
gMC->Gsvolu("FSTR","BOX",idtmed[514],par,3);
- // Freon for non-sesitive boundaries
- par[0] = xFLT/2;
- par[1] = 0.110/2;
+ // Non-Sesitive Freon boundaries
+ par[0] = xFLT*0.5;
+ par[1] = 0.110*0.5;//cm
par[2] = -1;
gMC->Gsvolu("FNSF","BOX",idtmed[512],par,3);
- gMC->Gspos("FNSF",0,"FSTR",0.,0.,0.,0,"ONLY");
- // Mylar for non-sesitive boundaries
- par[1] = 0.025;
- gMC->Gsvolu("FMYI","BOX",idtmed[510],par,3);
- gMC->Gspos("FMYI",0,"FNSF",0.,0.,0.,0,"ONLY");
-
- // Mylar for outer layers
- par[1] = 0.035/2;
- ycoor = -yPad/2.+par[1];
+ gMC->Gspos ("FNSF",0,"FSTR",0.,0.,0.,0,"ONLY");
+
+ // MYlar for Internal non-sesitive boundaries
+// par[1] = 0.025;//cm
+// gMC->Gsvolu("FMYI","BOX",idtmed[510],par,3);
+// gMC->Gspos ("FMYI",0,"FNSF",0.,0.,0.,0,"MANY");
+
+ // MYlar eXternal layers
+ par[1] = 0.035*0.5;//cm
+ ycoor = -yPad*0.5+par[1];
gMC->Gsvolu("FMYX","BOX",idtmed[510],par,3);
- gMC->Gspos("FMYX",1,"FSTR",0.,ycoor,0.,0,"ONLY");
- gMC->Gspos("FMYX",2,"FSTR",0.,-ycoor,0.,0,"ONLY");
+ gMC->Gspos ("FMYX",1,"FSTR",0.,ycoor,0.,0,"ONLY");
+ gMC->Gspos ("FMYX",2,"FSTR",0.,-ycoor,0.,0,"ONLY");
ycoor += par[1];
- // Graphyte layers
- par[1] = 0.003/2;
+ // GRaphyte Layers
+ par[1] = 0.003*0.5;
ycoor += par[1];
gMC->Gsvolu("FGRL","BOX",idtmed[502],par,3);
- gMC->Gspos("FGRL",1,"FSTR",0.,ycoor,0.,0,"ONLY");
- gMC->Gspos("FGRL",2,"FSTR",0.,-ycoor,0.,0,"ONLY");
+ gMC->Gspos ("FGRL",1,"FSTR",0.,ycoor,0.,0,"ONLY");
+ gMC->Gspos ("FGRL",2,"FSTR",0.,-ycoor,0.,0,"ONLY");
- // Freon sensitive layer
- par[0] = -1;
- par[1] = 0.110/2.;
- par[2] = zSenStrip/2.;
+ // freon sensitive layer (Chlorine-Fluorine-Carbon)
+ par[0] = xFST*0.5;
+ par[1] = 0.110*0.5;
+ par[2] = zSenStrip*0.5;
gMC->Gsvolu("FCFC","BOX",idtmed[513],par,3);
- gMC->Gspos("FCFC",0,"FNSF",0.,0.,0.,0,"ONLY");
+ gMC->Gspos ("FCFC",0,"FNSF",0.,0.,0.,0,"ONLY");
// Pad definition x & z
gMC->Gsdvn("FLZ","FCFC", nz, 3);
gMC->Gsdvn("FLX","FLZ" , nx, 1);
- // MRPC pixel itself
+ // MRPC PAD itself
par[0] = -1;
par[1] = -1;
par[2] = -1;
gMC->Gsvolu("FPAD", "BOX ", idtmed[513], par, 3);
- gMC->Gspos("FPAD", 0, "FLX", 0., 0., 0., 0, "ONLY");
-
+ gMC->Gspos ("FPAD", 0, "FLX", 0., 0., 0., 0, "ONLY");
//// Positioning the Strips (FSTR) in the FLT volumes /////
-
- // 3 (Central) Plate
- Float_t t = zFLT1+zFLT2+zFLT3/2.+7.*2.5;//Half Width of Barrel
+ // Plate A (Central)
+
+ Float_t t = zFLTC+zFLTB+zFLTA*0.5+ 2*db;//Half Width of Barrel
+
+ Float_t Gap = fGapA; //cm distance between the strip axis
Float_t zpos = 0;
- Float_t ang;
- Float_t Offset;
- Float_t last;
- nrot = 0;
+ Float_t ang = 0;
Int_t i=1,j=1;
- zcoor=0;
- Int_t UpDown=-1; // UpDown=-1 -> Upper strip, UpDown=+1 -> Lower strip
-
+ nrot = 0;
+ zcoor = 0;
+ ycoor = -14.5 + Space ; //2 cm over front plate
+
+ AliMatrix (idrotm[0], 90., 0.,90.,90.,0., 90.);
+ gMC->Gspos("FSTR",j,"FLTA",0.,ycoor, 0.,idrotm[0],"ONLY");
+
+ printf("%f, St. %2i, Pl.3 ",ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+
+ zcoor -= zSenStrip;
+ j++;
+ Int_t UpDown = -1; // UpDown=-1 -> Upper strip
+ // UpDown=+1 -> Lower strip
do{
- ang = atan(zcoor/t);
- ang = ang * kRaddeg;
+ ang = atan(zcoor/Radius);
+ ang *= kRaddeg;
AliMatrix (idrotm[nrot], 90., 0.,90.-ang,90.,-ang, 90.);
- AliMatrix (idrotm[nrot+1],90.,180.,90.+ang,90.,ang, 90.);
+ AliMatrix (idrotm[nrot+1],90.,180.,90.+ang,90., ang, 90.);
+ ang /= kRaddeg;
ycoor = -14.5+ Space; //2 cm over front plate
ycoor += (1-(UpDown+1)/2)*Gap;
- gMC->Gspos("FSTR",j ,"FLT3",0.,ycoor, zcoor,idrotm[nrot], "ONLY");
- gMC->Gspos("FSTR",j+1,"FLT3",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY");
- ang = ang / kRaddeg;
-
- zcoor=zcoor-(zSenStrip/2)/TMath::Cos(ang)+UpDown*Gap*TMath::Tan(ang)-(zSenStrip/2)/TMath::Cos(ang);
+ gMC->Gspos("FSTR",j ,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY");
+ gMC->Gspos("FSTR",j+1,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY");
+
+ printf("%f, St. %2i, Pl.3 ",ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+
+ j += 2;
UpDown*= -1; // Alternate strips
- i++;
- j+=2;
- } while (zcoor-(StripWidth/2)*TMath::Cos(ang)>-t+zFLT1+zFLT2+7*2.5);
+ zcoor = zcoor-(zSenStrip/2)/TMath::Cos(ang)-
+ UpDown*Gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang);
+ } while (zcoor-(StripWidth/2)*TMath::Cos(ang)>-t+zFLTC+zFLTB+db*2);
- ycoor = -29./2.+ Space; //2 cm over front plate
+ zcoor = zcoor+(zSenStrip/2)/TMath::Cos(ang)+
+ UpDown*Gap*TMath::Tan(ang)+
+ (zSenStrip/2)/TMath::Cos(ang);
+
+ Gap = fGapB;
+ zcoor = zcoor-(zSenStrip/2)/TMath::Cos(ang)-
+ UpDown*Gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang);
+
+ ang = atan(zcoor/Radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0.,90.-ang,90.,-ang, 90.);
+ AliMatrix (idrotm[nrot+1],90.,180.,90.+ang,90., ang, 90.);
+ ang /= kRaddeg;
+
+ ycoor = -14.5+ Space; //2 cm over front plate
+ ycoor += (1-(UpDown+1)/2)*Gap;
+ gMC->Gspos("FSTR",j ,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY");
+ gMC->Gspos("FSTR",j+1,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY");
+
+ printf("%f, St. %2i, Pl.3 ",ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+
+ ycoor = -hTof/2.+ Space;//2 cm over front plate
+
+ // Plate B
- // Plate 2
- zpos = -zFLT3/2-7.;
- ang = atan(zpos/sqrt(2*t*t-zpos*zpos));
- Offset = StripWidth*TMath::Cos(ang)/2;
- zpos -= Offset;
nrot = 0;
i=1;
- // UpDown has not to be reinitialized, so that the arrangement of the strips can continue coherently
+ UpDown = 1;
+ Float_t DeadRegion = 1.0;//cm
+
+ zpos = zcoor - (zSenStrip/2)/TMath::Cos(ang)-
+ UpDown*Gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang)-
+ DeadRegion/TMath::Cos(ang);
+
+ ang = atan(zpos/Radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
+ ang /= kRaddeg;
+ ycoor = -hTof*0.5+ Space ; //2 cm over front plate
+ ycoor += (1-(UpDown+1)/2)*Gap;
+ zcoor = zpos+(zFLTA*0.5+zFLTB*0.5+db); // Moves to the system of the modulus FLTB
+ gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
+
+ printf("%f, St. %2i, Pl.4 ",ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+
+ i++;
+ UpDown*=-1;
do {
- ang = atan(zpos/sqrt(2*t*t-zpos*zpos));
- ang = ang * kRaddeg;
+ zpos = zpos - (zSenStrip/2)/TMath::Cos(ang)-
+ UpDown*Gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang);
+ ang = atan(zpos/Radius);
+ ang *= kRaddeg;
AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
- ycoor = -29./2.+ Space ; //2 cm over front plate
+ ang /= kRaddeg;
+ ycoor = -hTof*0.5+ Space ; //2 cm over front plate
ycoor += (1-(UpDown+1)/2)*Gap;
- zcoor = zpos+(zFLT3/2.+7+zFLT2/2); // Moves to the system of the centre of the modulus FLT2
- gMC->Gspos("FSTR",i, "FLT2", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
- ang = ang / kRaddeg;
- zpos = zpos - (zSenStrip/2)/TMath::Cos(ang)+UpDown*Gap*TMath::Tan(ang)-(zSenStrip/2)/TMath::Cos(ang);
- last = StripWidth*TMath::Cos(ang)/2;
+ zcoor = zpos+(zFLTA*0.5+zFLTB*0.5+db); // Moves to the system of the modulus FLTB
+ gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
+
+ printf("%f, St. %2i, Pl.4 ",ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+
UpDown*=-1;
- i++;
- } while (zpos-(StripWidth/2)*TMath::Cos(ang)>-t+zFLT1+7);
-
- // Plate 1
- zpos = -t+zFLT1+3.5;
- ang = atan(zpos/sqrt(2*t*t-zpos*zpos));
- Offset = StripWidth*TMath::Cos(ang)/2.;
- zpos -= Offset;
+ i++;
+ } while (TMath::Abs(ang*kRaddeg)<22.5);
+ //till we reach a tilting angle of 22.5 degrees
+
+ ycoor = -hTof*0.5+ Space ; //2 cm over front plate
+ zpos = zpos - zSenStrip/TMath::Cos(ang);
+
+ do {
+ ang = atan(zpos/Radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
+ ang /= kRaddeg;
+ zcoor = zpos+(zFLTB/2+zFLTA/2+db);
+ gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
+ zpos = zpos - zSenStrip/TMath::Cos(ang);
+ printf("%f, St. %2i, Pl.4 ",ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ i++;
+
+ } while (zpos-StripWidth*0.5/TMath::Cos(ang)>-t+zFLTC+db);
+
+ // Plate C
+
+ zpos = zpos + zSenStrip/TMath::Cos(ang);
+
+ zpos = zpos - (zSenStrip/2)/TMath::Cos(ang)+
+ Gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang);
+
nrot = 0;
i=0;
- ycoor= -29./2.+Space+Gap/2;
+ ycoor= -hTof*0.5+Space+Gap;
- do {
- ang = atan(zpos/sqrt(2*t*t-zpos*zpos));
- ang = ang * kRaddeg;
- AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
+ do {
i++;
- zcoor = zpos+(zFLT1/2+zFLT2+zFLT3/2+7.*2.);
- gMC->Gspos("FSTR",i, "FLT1", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
- ang = ang / kRaddeg;
- zpos = zpos - zSenStrip/TMath::Cos(ang);
- last = StripWidth*TMath::Cos(ang)/2.;
- } while (zpos>-t+7.+last);
+ ang = atan(zpos/Radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
+ ang /= kRaddeg;
+ zcoor = zpos+(zFLTC*0.5+zFLTB+zFLTA*0.5+db*2);
+ gMC->Gspos("FSTR",i, "FLTC", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
+
+ printf("%f, St. %2i, Pl.5 ",ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
-printf("#######################################################\n");
-printf(" Distance from the bound of the FLT3: %f cm \n", t+zpos-(zSenStrip/2)/TMath::Cos(ang));
- ang = atan(zpos/sqrt(2*t*t-zpos*zpos));
zpos = zpos - zSenStrip/TMath::Cos(ang);
-printf("NEXT Distance from the bound of the FLT3: %f cm \n", t+zpos-(zSenStrip/2)/TMath::Cos(ang));
-printf("#######################################################\n");
+ } while (zpos-StripWidth*TMath::Cos(ang)*0.5>-t);
+
////////// Layers after detector /////////////////
-// Honeycomb layer after (3cm)
+// honeycomb (Polyethilene) Layer after (3cm)
- Float_t OverSpace = Space + 7.3;
-/// StripWidth*TMath::Sin(ang) + 1.3;
+ Float_t OverSpace = fOverSpc;//cm
par[0] = -1;
par[1] = 0.6;
par[2] = -1;
ycoor = -yFLT/2 + OverSpace + par[1];
- gMC->Gsvolu("FPE1", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FPE1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FPE2", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FPE2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FPE3", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FPE3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FPEA", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FPEA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FPEB", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FPEB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FPEC", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FPEC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
// Electronics (Cu) after
ycoor += par[1];
par[0] = -1;
- par[1] = 1.43*0.05 / 2.; // 5% of X0
+ par[1] = 1.43*0.05*0.5; // 5% of X0
par[2] = -1;
ycoor += par[1];
- gMC->Gsvolu("FEC1", "BOX ", idtmed[501], par, 3); // Cu
- gMC->Gspos("FEC1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FEC2", "BOX ", idtmed[501], par, 3); // Cu
- gMC->Gspos("FEC2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FEC3", "BOX ", idtmed[501], par, 3); // Cu
- gMC->Gspos("FEC3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
-
-// Cooling water after
+ gMC->Gsvolu("FECA", "BOX ", idtmed[501], par, 3); // Cu
+ gMC->Gspos ("FECA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FECB", "BOX ", idtmed[501], par, 3); // Cu
+ gMC->Gspos ("FECB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FECC", "BOX ", idtmed[501], par, 3); // Cu
+ gMC->Gspos ("FECC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
+
+// cooling WAter after
ycoor += par[1];
par[0] = -1;
- par[1] = 36.1*0.02 / 2.; // 2% of X0
+ par[1] = 36.1*0.02*0.5; // 2% of X0
par[2] = -1;
ycoor += par[1];
- gMC->Gsvolu("FWA1", "BOX ", idtmed[515], par, 3); // Water
- gMC->Gspos("FWA1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FWA2", "BOX ", idtmed[515], par, 3); // Water
- gMC->Gspos("FWA2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FWA3", "BOX ", idtmed[515], par, 3); // Water
- gMC->Gspos("FWA3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
-
-//back plate honycomb (2cm)
+ gMC->Gsvolu("FWAA", "BOX ", idtmed[515], par, 3); // Water
+ gMC->Gspos ("FWAA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FWAB", "BOX ", idtmed[515], par, 3); // Water
+ gMC->Gspos ("FWAB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FWAC", "BOX ", idtmed[515], par, 3); // Water
+ gMC->Gspos ("FWAC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
+
+//Back Plate honycomb (2cm)
par[0] = -1;
- par[1] = 2 / 2.;
+ par[1] = 2 *0.5;
par[2] = -1;
ycoor = yFLT/2 - par[1];
- gMC->Gsvolu("FEG1", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FEG1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FEG2", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FEG2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FEG3", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos("FEG3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FBPA", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FBPA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FBPB", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FBPB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FBPC", "BOX ", idtmed[503], par, 3); // Hony
+ gMC->Gspos ("FBPC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
}
//_____________________________________________________________________________
//
// Set the volumes visible
gMC->Gsatt("ALIC","SEEN",0);
- gMC->Gsatt("FBAR","SEEN",1);
- gMC->Gsatt("FTO1","SEEN",1);
- gMC->Gsatt("FTO2","SEEN",1);
- gMC->Gsatt("FTO3","SEEN",1);
- gMC->Gsatt("FBT1","SEEN",1);
- gMC->Gsatt("FBT2","SEEN",1);
- gMC->Gsatt("FBT3","SEEN",1);
- gMC->Gsatt("FDT1","SEEN",1);
- gMC->Gsatt("FDT2","SEEN",1);
- gMC->Gsatt("FDT3","SEEN",1);
- gMC->Gsatt("FLT1","SEEN",1);
- gMC->Gsatt("FLT2","SEEN",1);
- gMC->Gsatt("FLT3","SEEN",1);
- gMC->Gsatt("FPL1","SEEN",1);
- gMC->Gsatt("FPL2","SEEN",1);
- gMC->Gsatt("FPL3","SEEN",1);
- gMC->Gsatt("FLD1","SEEN",1);
- gMC->Gsatt("FLD2","SEEN",1);
- gMC->Gsatt("FLD3","SEEN",1);
- gMC->Gsatt("FLZ1","SEEN",1);
- gMC->Gsatt("FLZ2","SEEN",1);
- gMC->Gsatt("FLZ3","SEEN",1);
- gMC->Gsatt("FLX1","SEEN",1);
- gMC->Gsatt("FLX2","SEEN",1);
- gMC->Gsatt("FLX3","SEEN",1);
- gMC->Gsatt("FPA0","SEEN",1);
- //
+
+ gMC->Gsatt("FTOA","SEEN",1);
+ gMC->Gsatt("FTOB","SEEN",1);
+ gMC->Gsatt("FTOC","SEEN",1);
+ gMC->Gsatt("FLTA","SEEN",1);
+ gMC->Gsatt("FLTB","SEEN",1);
+ gMC->Gsatt("FLTC","SEEN",1);
+ gMC->Gsatt("FPLA","SEEN",1);
+ gMC->Gsatt("FPLB","SEEN",1);
+ gMC->Gsatt("FPLC","SEEN",1);
+ gMC->Gsatt("FSTR","SEEN",1);
+ gMC->Gsatt("FPEA","SEEN",1);
+ gMC->Gsatt("FPEB","SEEN",1);
+ gMC->Gsatt("FPEC","SEEN",1);
+
+ gMC->Gsatt("FLZ1","SEEN",0);
+ gMC->Gsatt("FLZ2","SEEN",0);
+ gMC->Gsatt("FLZ3","SEEN",0);
+ gMC->Gsatt("FLX1","SEEN",0);
+ gMC->Gsatt("FLX2","SEEN",0);
+ gMC->Gsatt("FLX3","SEEN",0);
+ gMC->Gsatt("FPAD","SEEN",0);
+
gMC->Gdopt("hide", "on");
gMC->Gdopt("shad", "on");
gMC->Gsatt("*", "fill", 7);
printf("**************************************"
" TOF "
"**************************************\n");
- printf("\n Version 1 of TOF initialing, "
- "with openings for PHOS and RICH\n\n");
+ printf("\n Version 1 of TOF initialing, "
+ "TOF with holes for PHOS detector\n");
AliTOF::Init();
- //
- // Check that FRAME is there otherwise we have no place where to
- // put TOF
- AliModule* FRAME=gAlice->GetModule("FRAME");
- if(!FRAME) {
- Error("Ctor","TOF needs FRAME to be present\n");
- exit(1);
- } else
- if(FRAME->IsVersion()!=0) {
- Error("Ctor","FRAME version 0 needed with this version of TOF\n");
- exit(1);
- }
-
- fIdFTO2=gMC->VolId("FTO2");
- fIdFTO3=gMC->VolId("FTO3");
- fIdFLT1=gMC->VolId("FLT1");
- fIdFLT2=gMC->VolId("FLT2");
- fIdFLT3=gMC->VolId("FLT3");
+ fIdFTOA = gMC->VolId("FTOA");
+ fIdFTOB = gMC->VolId("FTOB");
+ fIdFTOC = gMC->VolId("FTOC");
+ fIdFLTA = gMC->VolId("FLTA");
+ fIdFLTB = gMC->VolId("FLTB");
+ fIdFLTC = gMC->VolId("FLTC");
printf("**************************************"
" TOF "
// Procedure called at each step in the Time Of Flight
//
TLorentzVector mom, pos;
- Float_t hits[8],rho,phi,phid,z;
- Int_t sector, plate, pad_x, pad_z, strip;
- Int_t copy, pad_z_id, pad_x_id, strip_id, i;
- Int_t *idtmed = fIdtmed->GetArray()-499;
-
+ Float_t xm[3],pm[3],xpad[3],ppad[3];
+ Float_t hits[13],phi,phid,z;
+ Int_t vol[5];
+ Int_t sector, plate, pad_x, pad_z, strip;
+ Int_t copy, pad_z_id, pad_x_id, strip_id, i;
+ Int_t *idtmed = fIdtmed->GetArray()-499;
+ Float_t IncidenceAngle;
if(gMC->GetMedium()==idtmed[513] &&
gMC->IsTrackEntering() && gMC->TrackCharge()
&& gMC->CurrentVolID(copy)==fIdSens)
- {
- TClonesArray &lhits = *fHits;
-
- //_________getting information about hit volumes_____________
+ {
+ // getting information about hit volumes
pad_z_id=gMC->CurrentVolOffID(2,copy);
pad_z=copy;
strip_id=gMC->CurrentVolOffID(5,copy);
strip=copy;
- pad_z = (strip-1)*2+pad_z;
-
gMC->TrackPosition(pos);
gMC->TrackMomentum(mom);
- rho = sqrt(pos[0]*pos[0]+pos[1]*pos[1]);
- phi = TMath::ACos(pos[0]/rho);
- Float_t as = TMath::ASin(pos[1]/rho);
- if (as<0) phi = 2*3.141592654-phi;
+// Double_t NormPos=1./pos.Rho();
+ Double_t NormMom=1./mom.Rho();
+
+// getting the cohordinates in pad ref system
+ xm[0] = (Float_t)pos.X();
+ xm[1] = (Float_t)pos.Y();
+ xm[2] = (Float_t)pos.Z();
+
+ pm[0] = (Float_t)mom.X()*NormMom;
+ pm[1] = (Float_t)mom.Y()*NormMom;
+ pm[2] = (Float_t)mom.Z()*NormMom;
+
+ gMC->Gmtod(xm,xpad,1);
+ gMC->Gmtod(pm,ppad,2);
+
+ IncidenceAngle = TMath::ACos(ppad[1])*kRaddeg;
z = pos[2];
-
- if (z<=62. && z>=-62) plate = 3;
- if (z<=216. && z>62.) plate = 4;
- if (z>=-216. && z<-62.) plate = 2;
- if (z>216.) plate = 5;
- if (z<-216.) plate = 1;
-
- phid = phi*kRaddeg;
+
+ plate = 0;
+ if (TMath::Abs(z) <= fZlenA*0.5) plate = 3;
+ if (z < (fZlenA*0.5+fZlenB) &&
+ z > fZlenA*0.5) plate = 4;
+ if (z >-(fZlenA*0.5+fZlenB) &&
+ z < -fZlenA*0.5) plate = 2;
+ if (z > (fZlenA*0.5+fZlenB)) plate = 5;
+ if (z <-(fZlenA*0.5+fZlenB)) plate = 1;
+
+ phi = pos.Phi();
+ phid = phi*kRaddeg+180.;
sector = Int_t (phid/20.);
sector++;
- Double_t ptot=mom.Rho();
- Double_t norm=1/ptot;
for(i=0;i<3;++i) {
- hits[i]=pos[i];
- hits[i+3]=mom[i]*norm;
+ hits[i] = pos[i];
+ hits[i+3] = pm[i];
}
- hits[6]=ptot;
- hits[7]=pos[3];
- new(lhits[fNhits++]) AliTOFhit(fIshunt,gAlice->CurrentTrack(),sector, plate, pad_x, pad_z, hits);
+
+ hits[6] = mom.Rho();
+ hits[7] = pos[3];
+ hits[8] = xpad[0];
+ hits[9] = xpad[1];
+ hits[10]= xpad[2];
+ hits[11]= IncidenceAngle;
+ hits[12]= gMC->Edep();
+
+ vol[0]= sector;
+ vol[1]= plate;
+ vol[2]= strip;
+ vol[3]= pad_x;
+ vol[4]= pad_z;
+
+ AddHit(gAlice->CurrentTrack(),vol, hits);
}
}
-
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff