/*
$Log$
+Revision 1.11 2007/10/08 17:52:55 decaro
+hole region in front of PHOS detector: update of sectors' numbers
+
Revision 1.10 2007/10/07 19:40:46 decaro
right handling of l2t matrices and alignable entries in case of TOF staging geometry
// //
///////////////////////////////////////////////////////////////////////////////
-#include "TBRIK.h"
-#include "TGeometry.h"
-#include "TLorentzVector.h"
-#include "TNode.h"
-#include "TVirtualMC.h"
-#include "TGeoManager.h"
+#include <TDirectory.h>
+#include <TGeoGlobalMagField.h>
+#include <TGeoManager.h>
#include <TGeoMatrix.h>
#include <TGeoPhysicalNode.h>
#include <TGeoVolume.h>
+#include <TLorentzVector.h>
+#include <TVirtualMC.h>
#include "AliConst.h"
+#include "AliGeomManager.h"
#include "AliLog.h"
#include "AliMagF.h"
#include "AliMC.h"
ClassImp(AliTOFv6T0)
+// TOF sectors with Nino masks: 0, 8, 9, 10, 16
+const Bool_t AliTOFv6T0::fgkFEAwithMasks[18] =
+{kTRUE , kFALSE, kFALSE, kFALSE, kFALSE, kFALSE,
+ kFALSE, kFALSE, kTRUE , kTRUE , kTRUE , kFALSE,
+ kFALSE, kFALSE, kFALSE, kFALSE, kTRUE , kFALSE};
const Float_t AliTOFv6T0::fgkModuleWallThickness = 0.33; // cm
const Float_t AliTOFv6T0::fgkInterCentrModBorder1 = 49.5 ; // cm
const Float_t AliTOFv6T0::fgkInterCentrModBorder2 = 57.5 ; // cm
const Float_t AliTOFv6T0::fgkExterInterModBorder1 = 196.0 ; // cm
const Float_t AliTOFv6T0::fgkExterInterModBorder2 = 203.5 ; // cm
-const Float_t AliTOFv6T0::fgkLengthInCeModBorder = 4.7 ; // cm
-const Float_t AliTOFv6T0::fgkLengthExInModBorder = 7.0 ; // cm
+//const Float_t AliTOFv6T0::fgkLengthInCeModBorder = 7.2 ; // cm // it was 4.7 cm (AdC)
+const Float_t AliTOFv6T0::fgkLengthInCeModBorderU = 5.0 ; // cm
+const Float_t AliTOFv6T0::fgkLengthInCeModBorderD = 7.0 ; // cm
+const Float_t AliTOFv6T0::fgkLengthExInModBorder = 5.0 ; // cm // it was 7.0 cm (AdC)
const Float_t AliTOFv6T0::fgkModuleCoverThickness = 2.0 ; // cm
const Float_t AliTOFv6T0::fgkFEAwidth1 = 19.0; // cm
-const Float_t AliTOFv6T0::fgkFEAwidth2 = 38.5; // cm
+const Float_t AliTOFv6T0::fgkFEAwidth2 = 39.5;//38.5; // cm
const Float_t AliTOFv6T0::fgkSawThickness = 1.0; // cm
const Float_t AliTOFv6T0::fgkCBLw = 13.5; // cm
const Float_t AliTOFv6T0::fgkCBLh1 = 2.0; // cm
const Float_t AliTOFv6T0::fgkCBLh2 = 12.3; // cm
+const Float_t AliTOFv6T0::fgkBetweenLandMask = 0.1; // cm
+const Float_t AliTOFv6T0::fgkAl1parameters[3] = {fgkFEAwidth1*0.5, 0.4, 0.2}; // cm
+const Float_t AliTOFv6T0::fgkAl2parameters[3] = {7.25, 0.75, 0.25}; // cm
+const Float_t AliTOFv6T0::fgkAl3parameters[3] = {3., 4., 0.1}; // cm
+const Float_t AliTOFv6T0::fgkRoof1parameters[3] = {fgkAl1parameters[0], fgkAl1parameters[2], 1.45}; // cm
+const Float_t AliTOFv6T0::fgkRoof2parameters[3] = {fgkAl3parameters[0], 0.1, 1.15}; // cm
+const Float_t AliTOFv6T0::fgkFEAparameters[3] = {fgkFEAwidth1*0.5, 5.6, 0.1}; // cm
+const Float_t AliTOFv6T0::fgkBar[3] = {8.575, 0.6, 0.25}; // cm
+const Float_t AliTOFv6T0::fgkBar1[3] = {fgkBar[0], fgkBar[1], 0.1}; // cm
+const Float_t AliTOFv6T0::fgkBar2[3] = {fgkBar[0], 0.1, fgkBar[1] - 2.*fgkBar1[2]}; // cm
+const Float_t AliTOFv6T0::fgkBarS[3] = {2., fgkBar[1], fgkBar[2]}; // cm
+const Float_t AliTOFv6T0::fgkBarS1[3] = {fgkBarS[0], fgkBar1[1], fgkBar1[2]}; // cm
+const Float_t AliTOFv6T0::fgkBarS2[3] = {fgkBarS[0], fgkBar2[1], fgkBar2[2]}; // cm
//_____________________________________________________________________________
AliTOFv6T0::AliTOFv6T0():
fIdFTOC(-1),
fIdFLTA(-1),
fIdFLTB(-1),
- fIdFLTC(-1),
- fTOFHoles(kFALSE)
+ fIdFLTC(-1)//,
+//fTOFHoles(kFALSE)
{
//
// Default constructor
//
+
}
//_____________________________________________________________________________
fIdFTOC(-1),
fIdFLTA(-1),
fIdFLTB(-1),
- fIdFLTC(-1),
- fTOFHoles(kFALSE)
+ fIdFLTC(-1)//,
+ //fTOFHoles(kFALSE)
{
//
// Standard constructor
//
+
//
// Check that FRAME is there otherwise we have no place where to
// put TOF
-
+ /*
AliModule* frame = (AliModule*)gAlice->GetModule("FRAME");
+
if(!frame) {
AliFatal("TOF needs FRAME to be present");
- } else{
-
+ } else {
if (fTOFGeometry) delete fTOFGeometry;
fTOFGeometry = new AliTOFGeometry();
if(frame->IsVersion()==1) {
AliDebug(1,Form("Frame version %d", frame->IsVersion()));
AliDebug(1,"Full Coverage for TOF");
- fTOFHoles=false;}
+ fTOFHoles=false;}
else {
AliDebug(1,Form("Frame version %d", frame->IsVersion()));
AliDebug(1,"TOF with Holes for PHOS");
- fTOFHoles=true;}
+ fTOFHoles=true;}
+
}
+ */
+
+ if (fTOFGeometry) delete fTOFGeometry;
+ fTOFGeometry = new AliTOFGeometry();
fTOFGeometry->SetHoles(fTOFHoles);
//AliTOF::fTOFGeometry = fTOFGeometry;
// Save the geometry
TDirectory* saveDir = gDirectory;
- gAlice->GetRunLoader()->CdGAFile();
+ AliRunLoader::Instance()->CdGAFile();
fTOFGeometry->Write("TOFgeometry");
saveDir->cd();
// eventual changes in the geometry.
//
+ AliGeomManager::ELayerID idTOF = AliGeomManager::kTOF;
+ Int_t modUID, modnum=0;
+
TString volPath;
TString symName;
for (Int_t isect = 0; isect < nSectors; isect++) {
for (Int_t istr = 1; istr <= nStrips; istr++) {
- //if (fTOFSectors[isect]==-1) continue;
+ modUID = AliGeomManager::LayerToVolUID(idTOF, modnum++);
+ if (fTOFSectors[isect]==-1) continue;
if (fTOFHoles && (isect==13 || isect==14 || isect==15)) {
if (istr<39) {
AliDebug(2,Form("symName=%s\n",symName.Data()));
AliDebug(2,"--------------------------------------------");
- gGeoManager->SetAlignableEntry(symName.Data(),volPath.Data());
+ if(!gGeoManager->SetAlignableEntry(symName.Data(),volPath.Data(),modUID))
+ AliError(Form("Alignable entry %s not set",symName.Data()));
//T2L matrices for alignment
- TGeoPNEntry *e = gGeoManager->GetAlignableEntry(symName.Data());
+ TGeoPNEntry *e = gGeoManager->GetAlignableEntryByUID(modUID);
if (e) {
- const char *path = e->GetTitle();
- if (!gGeoManager->cd(path)) {
- AliFatal(Form("Volume path %s not valid!",path));
- }
- TGeoHMatrix *globMatrix = gGeoManager->GetCurrentMatrix();
+ TGeoHMatrix *globMatrix = e->GetGlobalOrig();
Double_t phi = 20.0 * (isect % 18) + 10.0;
TGeoHMatrix *t2l = new TGeoHMatrix();
t2l->RotateZ(phi);
else {
AliError(Form("Alignable entry %s is not valid!",symName.Data()));
}
-
imod++;
}
}
symName = snSM;
symName += Form("%02d",isect);
- AliDebug(2,"--------------------------------------------");
- AliDebug(2,Form("Alignable object %d", isect+imod));
- AliDebug(2,Form("volPath=%s\n",volPath.Data()));
- AliDebug(2,Form("symName=%s\n",symName.Data()));
- AliDebug(2,"--------------------------------------------");
-
- gGeoManager->SetAlignableEntry(symName.Data(),volPath.Data());
+ AliDebug(2,"--------------------------------------------");
+ AliDebug(2,Form("Alignable object %d", isect+imod));
+ AliDebug(2,Form("volPath=%s\n",volPath.Data()));
+ AliDebug(2,Form("symName=%s\n",symName.Data()));
+ AliDebug(2,"--------------------------------------------");
- }
-
-}
-//____________________________________________________________________________
-void AliTOFv6T0::BuildGeometry()
-{
- //
- // Build TOF ROOT geometry for the ALICE event display
- //
- TNode *node, *top;
- const int kColorTOF = 27;
-
- TGeometry *globalGeometry = (TGeometry*)gAlice->GetGeometry();
-
- // Find top TNODE
- top = globalGeometry->GetNode("alice");
-
- // Position the different copies
- const Float_t krTof =(fTOFGeometry->Rmax()+fTOFGeometry->Rmin())/2.;
- const Float_t khTof = fTOFGeometry->Rmax()-fTOFGeometry->Rmin();
- const Int_t kNTof = fTOFGeometry->NSectors();
- const Float_t kangle = k2PI/kNTof;
-
- //const Float_t fgkInterCentrModBorder1 = 49.5;
- //const Float_t fgkInterCentrModBorder2 = 57.5;
-
- Float_t ang;
-
- // define offset for nodes
- Float_t zOffsetB = (fTOFGeometry->ZlenA()*0.5 + (fgkInterCentrModBorder1+fgkInterCentrModBorder2)*0.5)*0.5;
- Float_t zOffsetA = 0.;
- // Define TOF basic volume
-
- char nodeName0[16], nodeName1[16], nodeName2[16];
- char nodeName3[16], nodeName4[16], rotMatNum[16];
+ gGeoManager->SetAlignableEntry(symName.Data(),volPath.Data());
- if (fTOFHoles) {
- new TBRIK("S_TOF_B","TOF box","void",
- fTOFGeometry->StripLength()*0.5, khTof*0.5, fTOFGeometry->ZlenB()*0.5);
- new TBRIK("S_TOF_C","TOF box","void",
- fTOFGeometry->StripLength()*0.5, khTof*0.5, fTOFGeometry->ZlenB()*0.5);
}
- new TBRIK("S_TOF_A","TOF box","void",
- fTOFGeometry->StripLength()*0.5, khTof*0.5, fTOFGeometry->ZlenA()*0.5);
- for (Int_t nodeNum=1;nodeNum<kNTof+1;nodeNum++){
-
- if (nodeNum<10) {
- sprintf(rotMatNum,"rot50%i",nodeNum);
- sprintf(nodeName0,"FTO00%i",nodeNum);
- sprintf(nodeName1,"FTO10%i",nodeNum);
- sprintf(nodeName2,"FTO20%i",nodeNum);
- sprintf(nodeName3,"FTO30%i",nodeNum);
- sprintf(nodeName4,"FTO40%i",nodeNum);
- }
- if (nodeNum>9) {
- sprintf(rotMatNum,"rot5%i",nodeNum);
- sprintf(nodeName0,"FTO0%i",nodeNum);
- sprintf(nodeName1,"FTO1%i",nodeNum);
- sprintf(nodeName2,"FTO2%i",nodeNum);
- sprintf(nodeName3,"FTO3%i",nodeNum);
- sprintf(nodeName4,"FTO4%i",nodeNum);
- }
-
- new TRotMatrix(rotMatNum,rotMatNum,90,-20*nodeNum,90,90-20*nodeNum,0,0);
- ang = (4.5-nodeNum) * kangle;
-
- if (fTOFHoles) {
- top->cd();
- node = new TNode(nodeName2,nodeName2,"S_TOF_B", krTof*TMath::Cos(ang), krTof*TMath::Sin(ang), zOffsetB,rotMatNum);
- node->SetLineColor(kColorTOF);
- fNodes->Add(node);
-
- top->cd();
- node = new TNode(nodeName3,nodeName3,"S_TOF_C", krTof*TMath::Cos(ang), krTof*TMath::Sin(ang),-zOffsetB,rotMatNum);
- node->SetLineColor(kColorTOF);
- fNodes->Add(node);
- }
-
- top->cd();
- node = new TNode(nodeName4,nodeName4,"S_TOF_A", krTof*TMath::Cos(ang), krTof*TMath::Sin(ang), zOffsetA,rotMatNum);
- node->SetLineColor(kColorTOF);
- fNodes->Add(node);
- } // end loop on nodeNum
-
}
//_____________________________________________________________________________
// Definition of the Time Of Fligh Resistive Plate Chambers
//
- // module wall thickness (cm)
- //const Float_t fgkModuleWallThickness = 0.33;
-
AliDebug(1, "************************* TOF geometry **************************");
- AliDebug(1,Form(" xtof %d", xtof));
- AliDebug(1,Form(" ytof %d", ytof));
- AliDebug(1,Form(" zlenA %d", zlenA));
- AliDebug(2,Form(" zlenA*0.5 = %d", zlenA*0.5));
+ AliDebug(1,Form(" xtof %f", xtof));
+ AliDebug(1,Form(" ytof %f", ytof));
+ AliDebug(1,Form(" zlenA %f", zlenA));
+ AliDebug(2,Form(" zlenA*0.5 = %f", zlenA*0.5));
Float_t xFLT, yFLT, zFLTA;
xFLT = xtof - 2.*fgkModuleWallThickness;
CreateModuleCovers(xtof, zlenA);
CreateBackZone(xtof, ytof, zlenA);
- MakeFrontEndElectronics();
- MakeFEACooling(xtof, ytof, zlenA);
- MakeNinoMask(xtof, ytof, zlenA);
+ MakeFrontEndElectronics(xtof);
+ MakeFEACooling(xtof);
+ MakeNinoMask(xtof);
MakeSuperModuleCooling(xtof, ytof, zlenA);
MakeSuperModuleServices(xtof, ytof, zlenA);
const Float_t kPi = TMath::Pi();
- //const Float_t fgkInterCentrModBorder1 = 49.5;
- //const Float_t fgkInterCentrModBorder2 = 57.5;
- //const Float_t fgkExterInterModBorder1 = 196.0;
- //const Float_t fgkExterInterModBorder2 = 203.5;
-
- //const Float_t fgkLengthExInModBorder = 4.7;
- //const Float_t fgkLengthInCeModBorder = 7.0;
-
- // module wall thickness (cm)
- //const Float_t fgkModuleWallThickness = 0.33;
-
- // Definition of the of fibre glass modules (FTOA, FTOB and FTOC)
-
Int_t *idtmed = fIdtmed->GetArray()-499;
Int_t idrotm[8];
+ // Definition of the of fibre glass modules (FTOA, FTOB and FTOC)
Float_t par[3];
par[0] = xtof * 0.5;
par[1] = ytof * 0.25;
// Definition and positioning
// of the not sensitive volumes with Insensitive Freon (FLTA, FLTB and FLTC)
-
par[0] = xFLT*0.5;
par[1] = yFLT*0.5;
par[2] = zFLTA*0.5;
// Definition and positioning
// of the fibre glass walls between central and intermediate modules (FWZ1 and FWZ2)
-
Float_t alpha, tgal, beta, tgbe, trpa[11];
- tgal = (yFLT - 2.*fgkLengthInCeModBorder)/(fgkInterCentrModBorder2 - fgkInterCentrModBorder1);
+ //tgal = (yFLT - 2.*fgkLengthInCeModBorder)/(fgkInterCentrModBorder2 - fgkInterCentrModBorder1);
+ tgal = (yFLT - fgkLengthInCeModBorderU - fgkLengthInCeModBorderD)/(fgkInterCentrModBorder2 - fgkInterCentrModBorder1);
alpha = TMath::ATan(tgal);
beta = (kPi*0.5 - alpha)*0.5;
tgbe = TMath::Tan(beta);
trpa[1] = 0.;
trpa[2] = 0.;
trpa[3] = 2.*fgkModuleWallThickness;
- trpa[4] = (fgkLengthInCeModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5;
- trpa[5] = (fgkLengthInCeModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5;
+ //trpa[4] = (fgkLengthInCeModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5;
+ //trpa[5] = (fgkLengthInCeModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5;
+ trpa[4] = (fgkLengthInCeModBorderD - 2.*fgkModuleWallThickness*tgbe)*0.5;
+ trpa[5] = (fgkLengthInCeModBorderD + 2.*fgkModuleWallThickness*tgbe)*0.5;
trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
trpa[7] = 2.*fgkModuleWallThickness;
- trpa[8] = (fgkLengthInCeModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5;
- trpa[9] = (fgkLengthInCeModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5;
+ trpa[8] = (fgkLengthInCeModBorderD - 2.*fgkModuleWallThickness*tgbe)*0.5;
+ trpa[9] = (fgkLengthInCeModBorderD + 2.*fgkModuleWallThickness*tgbe)*0.5;
+ //trpa[8] = (fgkLengthInCeModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5;
+ //trpa[9] = (fgkLengthInCeModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5;
trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
- gMC->Gsvolu("FWZ1","TRAP", idtmed[503], trpa, 11); // Fibre glass
+ gMC->Gsvolu("FWZ1D", "TRAP", idtmed[503], trpa, 11); // Fibre glass
AliMatrix (idrotm[0],90., 90.,180.,0.,90.,180.);
AliMatrix (idrotm[1],90., 90., 0.,0.,90., 0.);
//xcoor = 0.;
- ycoor = -(yFLT - fgkLengthInCeModBorder)*0.5;
+ //ycoor = -(yFLT - fgkLengthInCeModBorder)*0.5;
+ ycoor = -(yFLT - fgkLengthInCeModBorderD)*0.5;
zcoor = fgkInterCentrModBorder1;
- gMC->Gspos("FWZ1", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[0],"ONLY");
- gMC->Gspos("FWZ1", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[1],"ONLY");
+ gMC->Gspos("FWZ1D", 1, "FLTA", xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ gMC->Gspos("FWZ1D", 2, "FLTA", xcoor, ycoor,-zcoor, idrotm[1], "ONLY");
Float_t y0B, ycoorB, zcoorB;
if (fTOFHoles) {
- y0B = fgkLengthInCeModBorder - fgkModuleWallThickness*tgbe;
+ //y0B = fgkLengthInCeModBorder - fgkModuleWallThickness*tgbe;
+ y0B = fgkLengthInCeModBorderD - fgkModuleWallThickness*tgbe;
trpa[0] = xFLT*0.5;
trpa[1] = 0.;
trpa[2] = 0.;
//xcoor = 0.;
ycoorB = ycoor - fgkModuleWallThickness*0.5*tgbe;
zcoorB = (zlenA*0.5 - 2.*fgkModuleWallThickness - fgkInterCentrModBorder1)*0.5 - 2.*fgkModuleWallThickness;
- gMC->Gsvolu("FWZA","TRAP", idtmed[503], trpa, 11); // Fibre glass
- gMC->Gspos("FWZA", 1,"FLTB", xcoor, ycoorB, zcoorB,idrotm[1],"ONLY");
- gMC->Gspos("FWZA", 2,"FLTC", xcoor, ycoorB,-zcoorB,idrotm[0],"ONLY");
+ gMC->Gsvolu("FWZAD", "TRAP", idtmed[503], trpa, 11); // Fibre glass
+ gMC->Gspos("FWZAD", 1, "FLTB", xcoor, ycoorB, zcoorB, idrotm[1], "ONLY");
+ gMC->Gspos("FWZAD", 2, "FLTC", xcoor, ycoorB,-zcoorB, idrotm[0], "ONLY");
}
+
+
+ tgal = (yFLT - fgkLengthInCeModBorderU - fgkLengthInCeModBorderD)/(fgkInterCentrModBorder2 - fgkInterCentrModBorder1);
+ alpha = TMath::ATan(tgal);
+ beta = (kPi*0.5 - alpha)*0.5;
+ tgbe = TMath::Tan(beta);
+ trpa[0] = xFLT*0.5;
+ trpa[1] = 0.;
+ trpa[2] = 0.;
+ trpa[3] = 2.*fgkModuleWallThickness;
+ //trpa[4] = (fgkLengthInCeModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5;
+ //trpa[5] = (fgkLengthInCeModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5;
+ trpa[4] = (fgkLengthInCeModBorderU - 2.*fgkModuleWallThickness*tgbe)*0.5;
+ trpa[5] = (fgkLengthInCeModBorderU + 2.*fgkModuleWallThickness*tgbe)*0.5;
+ trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
+ trpa[7] = 2.*fgkModuleWallThickness;
+ trpa[8] = (fgkLengthInCeModBorderU - 2.*fgkModuleWallThickness*tgbe)*0.5;
+ trpa[9] = (fgkLengthInCeModBorderU + 2.*fgkModuleWallThickness*tgbe)*0.5;
+ //trpa[8] = (fgkLengthInCeModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5;
+ //trpa[9] = (fgkLengthInCeModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5;
+ trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
+ gMC->Gsvolu("FWZ1U", "TRAP", idtmed[503], trpa, 11); // Fibre glass
+
+
AliMatrix (idrotm[2],90.,270., 0.,0.,90.,180.);
AliMatrix (idrotm[3],90.,270.,180.,0.,90., 0.);
//xcoor = 0.;
- ycoor = (yFLT - fgkLengthInCeModBorder)*0.5;
+ //ycoor = (yFLT - fgkLengthInCeModBorder)*0.5;
+ ycoor = (yFLT - fgkLengthInCeModBorderU)*0.5;
zcoor = fgkInterCentrModBorder2;
- gMC->Gspos("FWZ1", 3,"FLTA", xcoor, ycoor, zcoor,idrotm[2],"ONLY");
- gMC->Gspos("FWZ1", 4,"FLTA", xcoor, ycoor,-zcoor,idrotm[3],"ONLY");
+ gMC->Gspos("FWZ1U", 1, "FLTA", xcoor, ycoor, zcoor,idrotm[2], "ONLY");
+ gMC->Gspos("FWZ1U", 2, "FLTA", xcoor, ycoor,-zcoor,idrotm[3], "ONLY");
if (fTOFHoles) {
- y0B = fgkLengthInCeModBorder + fgkModuleWallThickness*tgbe;
+ //y0B = fgkLengthInCeModBorder + fgkModuleWallThickness*tgbe;
+ y0B = fgkLengthInCeModBorderU + fgkModuleWallThickness*tgbe;
trpa[0] = xFLT*0.5;
trpa[1] = 0.;
trpa[2] = 0.;
trpa[8] = (y0B - fgkModuleWallThickness*tgbe)*0.5;
trpa[9] = (y0B + fgkModuleWallThickness*tgbe)*0.5;
trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
- gMC->Gsvolu("FWZB","TRAP", idtmed[503], trpa, 11); // Fibre glass
+ gMC->Gsvolu("FWZBU", "TRAP", idtmed[503], trpa, 11); // Fibre glass
//xcoor = 0.;
ycoorB = ycoor - fgkModuleWallThickness*0.5*tgbe;
zcoorB = (zlenA*0.5 - 2.*fgkModuleWallThickness - fgkInterCentrModBorder1)*0.5 -
(fgkInterCentrModBorder2 - fgkInterCentrModBorder1) - 2.*fgkModuleWallThickness;
- gMC->Gspos("FWZB", 1,"FLTB", xcoor, ycoorB, zcoorB,idrotm[3],"ONLY");
- gMC->Gspos("FWZB", 2,"FLTC", xcoor, ycoorB,-zcoorB,idrotm[2],"ONLY");
+ gMC->Gspos("FWZBU", 1, "FLTB", xcoor, ycoorB, zcoorB, idrotm[3], "ONLY");
+ gMC->Gspos("FWZBU", 2, "FLTC", xcoor, ycoorB,-zcoorB, idrotm[2], "ONLY");
}
trpa[0] = 0.5*(fgkInterCentrModBorder2 - fgkInterCentrModBorder1)/TMath::Cos(alpha);
trpa[3] = -beta*kRaddeg;
trpa[4] = 0.;
trpa[5] = 0.;
- gMC->Gsvolu("FWZ2","PARA", idtmed[503], trpa, 6); // Fibre glass
+ gMC->Gsvolu("FWZ2", "PARA", idtmed[503], trpa, 6); // Fibre glass
AliMatrix (idrotm[4], alpha*kRaddeg,90.,90.+alpha*kRaddeg,90.,90.,180.);
AliMatrix (idrotm[5],180.-alpha*kRaddeg,90.,90.-alpha*kRaddeg,90.,90., 0.);
//xcoor = 0.;
- ycoor = 0.;
+ //ycoor = 0.;
+ ycoor = (fgkLengthInCeModBorderD - fgkLengthInCeModBorderU)*0.5;
zcoor = (fgkInterCentrModBorder2 + fgkInterCentrModBorder1)*0.5;
- gMC->Gspos("FWZ2", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[4],"ONLY");
- gMC->Gspos("FWZ2", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[5],"ONLY");
+ gMC->Gspos("FWZ2", 1, "FLTA", xcoor, ycoor, zcoor, idrotm[4], "ONLY");
+ gMC->Gspos("FWZ2", 2, "FLTA", xcoor, ycoor,-zcoor, idrotm[5], "ONLY");
if (fTOFHoles) {
trpa[0] = 0.5*(fgkInterCentrModBorder2 - fgkInterCentrModBorder1)/TMath::Cos(alpha);
trpa[3] = -beta*kRaddeg;
trpa[4] = 0.;
trpa[5] = 0.;
- gMC->Gsvolu("FWZC","PARA", idtmed[503], trpa, 6); // Fibre glass
+ gMC->Gsvolu("FWZC", "PARA", idtmed[503], trpa, 6); // Fibre glass
//xcoor = 0.;
ycoorB = ycoor - fgkModuleWallThickness*tgbe;
zcoorB = (zlenA*0.5 - 2.*fgkModuleWallThickness - fgkInterCentrModBorder1)*0.5 -
(fgkInterCentrModBorder2 - fgkInterCentrModBorder1)*0.5 - 2.*fgkModuleWallThickness;
- gMC->Gspos("FWZC", 1,"FLTB", xcoor, ycoorB, zcoorB, idrotm[5],"ONLY");
- gMC->Gspos("FWZC", 2,"FLTC", xcoor, ycoorB,-zcoorB, idrotm[4],"ONLY");
+ gMC->Gspos("FWZC", 1, "FLTB", xcoor, ycoorB, zcoorB, idrotm[5], "ONLY");
+ gMC->Gspos("FWZC", 2, "FLTC", xcoor, ycoorB,-zcoorB, idrotm[4], "ONLY");
}
// Definition and positioning
// of the fibre glass walls between intermediate and lateral modules (FWZ3 and FWZ4)
-
tgal = (yFLT - 2.*fgkLengthExInModBorder)/(fgkExterInterModBorder2 - fgkExterInterModBorder1);
alpha = TMath::ATan(tgal);
beta = (kPi*0.5 - alpha)*0.5;
trpa[8] = (fgkLengthExInModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5;
trpa[9] = (fgkLengthExInModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5;
trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
- gMC->Gsvolu("FWZ3","TRAP", idtmed[503], trpa, 11); // Fibre glass
+ gMC->Gsvolu("FWZ3", "TRAP", idtmed[503], trpa, 11); // Fibre glass
//xcoor = 0.;
ycoor = (yFLT - fgkLengthExInModBorder)*0.5;
zcoor = fgkExterInterModBorder1;
- gMC->Gspos("FWZ3", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[3],"ONLY");
- gMC->Gspos("FWZ3", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[2],"ONLY");
+ gMC->Gspos("FWZ3", 1, "FLTA", xcoor, ycoor, zcoor,idrotm[3], "ONLY");
+ gMC->Gspos("FWZ3", 2, "FLTA", xcoor, ycoor,-zcoor,idrotm[2], "ONLY");
if (fTOFHoles) {
//xcoor = 0.;
//ycoor = (yFLT - fgkLengthExInModBorder)*0.5;
zcoor = -fgkExterInterModBorder1 + (zlenA*0.5 + fgkInterCentrModBorder1 - 2.*fgkModuleWallThickness)*0.5;
- gMC->Gspos("FWZ3", 5,"FLTB", xcoor, ycoor, zcoor,idrotm[2],"ONLY");
- gMC->Gspos("FWZ3", 6,"FLTC", xcoor, ycoor,-zcoor,idrotm[3],"ONLY");
+ gMC->Gspos("FWZ3", 5, "FLTB", xcoor, ycoor, zcoor, idrotm[2], "ONLY");
+ gMC->Gspos("FWZ3", 6, "FLTC", xcoor, ycoor,-zcoor, idrotm[3], "ONLY");
}
//xcoor = 0.;
ycoor = -(yFLT - fgkLengthExInModBorder)*0.5;
zcoor = fgkExterInterModBorder2;
- gMC->Gspos("FWZ3", 3,"FLTA", xcoor, ycoor, zcoor,idrotm[1],"ONLY");
- gMC->Gspos("FWZ3", 4,"FLTA", xcoor, ycoor,-zcoor,idrotm[0],"ONLY");
+ gMC->Gspos("FWZ3", 3, "FLTA", xcoor, ycoor, zcoor, idrotm[1], "ONLY");
+ gMC->Gspos("FWZ3", 4, "FLTA", xcoor, ycoor,-zcoor, idrotm[0], "ONLY");
if (fTOFHoles) {
//xcoor = 0.;
//ycoor = -(yFLT - fgkLengthExInModBorder)*0.5;
zcoor = -fgkExterInterModBorder2 + (zlenA*0.5 + fgkInterCentrModBorder1 - 2.*fgkModuleWallThickness)*0.5;
- gMC->Gspos("FWZ3", 7,"FLTB", xcoor, ycoor, zcoor,idrotm[0],"ONLY");
- gMC->Gspos("FWZ3", 8,"FLTC", xcoor, ycoor,-zcoor,idrotm[1],"ONLY");
+ gMC->Gspos("FWZ3", 7, "FLTB", xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ gMC->Gspos("FWZ3", 8, "FLTC", xcoor, ycoor,-zcoor, idrotm[1], "ONLY");
}
trpa[0] = 0.5*(fgkExterInterModBorder2 - fgkExterInterModBorder1)/TMath::Cos(alpha);
trpa[3] = -beta*kRaddeg;
trpa[4] = 0.;
trpa[5] = 0.;
- gMC->Gsvolu("FWZ4","PARA", idtmed[503], trpa, 6); // Fibre glass
+ gMC->Gsvolu("FWZ4", "PARA", idtmed[503], trpa, 6); // Fibre glass
AliMatrix (idrotm[6],alpha*kRaddeg,90.,90.+alpha*kRaddeg,90.,90.,180.);
AliMatrix (idrotm[7],180.-alpha*kRaddeg,90.,90.-alpha*kRaddeg,90.,90.,0.);
//xcoor = 0.;
ycoor = 0.;
zcoor = (fgkExterInterModBorder2 + fgkExterInterModBorder1)*0.5;
- gMC->Gspos("FWZ4", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[7],"ONLY");
- gMC->Gspos("FWZ4", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[6],"ONLY");
+ gMC->Gspos("FWZ4", 1, "FLTA", xcoor, ycoor, zcoor, idrotm[7], "ONLY");
+ gMC->Gspos("FWZ4", 2, "FLTA", xcoor, ycoor,-zcoor, idrotm[6], "ONLY");
if (fTOFHoles) {
//xcoor = 0.;
//ycoor = 0.;
zcoor = -(fgkExterInterModBorder2 + fgkExterInterModBorder1)*0.5 +
(zlenA*0.5 + fgkInterCentrModBorder1 - 2.*fgkModuleWallThickness)*0.5;
- gMC->Gspos("FWZ4", 3,"FLTB", xcoor, ycoor, zcoor,idrotm[6],"ONLY");
- gMC->Gspos("FWZ4", 4,"FLTC", xcoor, ycoor,-zcoor,idrotm[7],"ONLY");
+ gMC->Gspos("FWZ4", 3, "FLTB", xcoor, ycoor, zcoor, idrotm[6], "ONLY");
+ gMC->Gspos("FWZ4", 4, "FLTC", xcoor, ycoor,-zcoor, idrotm[7], "ONLY");
}
}
// Create covers for module:
// per each module zone, defined according to
// fgkInterCentrModBorder2, fgkExterInterModBorder1 and zlenA+2 values,
- // there is a CORNICE of thickness 2cm in Al
+ // there is a frame of thickness 2cm in Al
// and the contained zones in honeycomb of Al.
// There is also an interface layer (1.6mm thichness)
// and plastic and Cu corresponding to the flat cables.
//
- // module cover between strips and cards (cm)
- //const Float_t fgkModuleCoverThickness = 2.;
-
- //const Float_t fgkInterCentrModBorder2 = 57.5;
- //const Float_t fgkExterInterModBorder1 = 196.0;
-
Int_t *idtmed = fIdtmed->GetArray()-499;
Float_t par[3];
// volumes for flat cables
// plastic
- const Float_t kPlasticFlatCableThickness = 0.24;
+ const Float_t kPlasticFlatCableThickness = 0.25;
par[0] = xtof*0.5;
par[1] = kPlasticFlatCableThickness*0.5;
par[2] = fgkInterCentrModBorder2 - 2.;
par[1] = kCopperFlatCableThickness*0.5;
par[2] = fgkInterCentrModBorder2 - 2.;
gMC->Gsvolu("FCC1", "BOX ", idtmed[512], par, 3); // Cu
- //xcoor = 0.;
- ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness - kCopperFlatCableThickness*0.5;
- zcoor = 0.;
- gMC->Gspos("FCC1", 0, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FCC1", 0, "FFC1", 0., 0., 0., 0, "ONLY");
//par[0] = xtof*0.5;
//par[1] = kCopperFlatCableThickness*0.5;
par[2] = (fgkExterInterModBorder1 - fgkInterCentrModBorder2)*0.5 - 2.;
gMC->Gsvolu("FCC2", "BOX ", idtmed[512], par, 3); // Cu
- //xcoor = 0.;
- //ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness - kCopperFlatCableThickness*0.5;
- zcoor = (fgkExterInterModBorder1 + fgkInterCentrModBorder2)*0.5;
- gMC->Gspos("FCC2", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY");
- gMC->Gspos("FCC2", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY");
- if (fTOFHoles) {
- gMC->Gspos("FCC2", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY");
- gMC->Gspos("FCC2", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY");
- }
+ gMC->Gspos("FCC2", 0, "FFC2", 0., 0., 0., 0, "ONLY");
//par[0] = xtof*0.5;
//par[1] = kCopperFlatCableThickness*0.5;
par[2] = (zlenA*0.5 + 2. - fgkExterInterModBorder1)*0.5 - 2.;
gMC->Gsvolu("FCC3", "BOX ", idtmed[512], par, 3); // Cu
- //xcoor = 0.;
- //ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness - kCopperFlatCableThickness*0.5;
- zcoor = (zlenA*0.5 + 2. + fgkExterInterModBorder1)*0.5;
- gMC->Gspos("FCC3", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY");
- gMC->Gspos("FCC3", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY");
- if (fTOFHoles) {
- gMC->Gspos("FCC3", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY");
- gMC->Gspos("FCC3", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY");
- }
+ gMC->Gspos("FCC3", 0, "FFC3", 0., 0., 0., 0, "ONLY");
}
//
// Fill BTOF_%i (for i=0,...17) volumes
// with volumes FTOA (MRPC strip container),
- // In case of TOF holes, two sectors (i.e. 11th and 12th)
+ // In case of TOF holes, three sectors (i.e. 13th, 14th and 15th)
// are filled with volumes: FTOB and FTOC (MRPC containers),
//
- //const Float_t fgkInterCentrModBorder1 = 49.5;
+ const Int_t kSize=16;
Int_t idrotm[1];
xcoor = 0.;
// Positioning of fibre glass modules (FTOA, FTOB and FTOC)
-
for(Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++){
if(fTOFSectors[isec]==-1)continue;
- char name[16];
- sprintf(name, "BTOF%d",isec);
+
+ char name[kSize];
+ snprintf(name, kSize, "BTOF%d",isec);
if (fTOFHoles && (isec==13 || isec==14 || isec==15)) {
- //if (fTOFHoles && (isec==16||isec==17)) { \\Old 6h convention
//xcoor = 0.;
ycoor = (zlenA*0.5 + fgkInterCentrModBorder1)*0.5;
zcoor = -ytof * 0.25;
//
// Fill BTOF_%i (for i=0,...17) volumes
// with volumes FPEA (to separate strips from FEA cards)
- // In case of TOF holes, two sectors (i.e. 11th and 12th)
+ // In case of TOF holes, three sectors (i.e. 13th, 14th and 15th)
// are filled with FPEB volumes
// (to separate MRPC strips from FEA cards)
//
- // module cover between strips and cards (cm)
- //const Float_t fgkModuleCoverThickness = 2.;
+ const Int_t kSize=16;
Int_t idrotm[1];
ycoor = 0.;
zcoor = fgkModuleCoverThickness*0.5;
- char name[16];
+ char name[kSize];
// Positioning of module covers (FPEA, FPEB)
-
for(Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) {
if(fTOFSectors[isec]==-1)continue;
- sprintf(name, "BTOF%d",isec);
- //if (fTOFHoles && (isec==16||isec==17)) \\Old 6h convention
+ snprintf(name, kSize, "BTOF%d",isec);
if (fTOFHoles && (isec==13 || isec==14 || isec==15))
gMC->Gspos("FPEB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
else
void AliTOFv6T0::MakeBackInBTOFvolumes(Float_t ytof) const
{
//
- // Fill BTOF_%i (for i=0,...17) volumes
- // with volumes FAIA (FEA cards and services container)
- // In case of TOF holes, two sectors (i.e. 11th and 12th)
- // are filled with volumes FAIB (FEA cards and services container).
+ // Fill BTOF_%i (for i=0,...17) volumes with volumes called FAIA and
+ // FAIC (FEA cards and services container).
+ // In case of TOF holes, three sectors (i.e. 13th, 14th and 15th) are
+ // filled with volumes FAIB (FEA cards and services container).
//
- // module cover between strips and cards (cm)
- //const Float_t fgkModuleCoverThickness = 2.;
+ const Int_t kSize=16;
Int_t idrotm[1];
ycoor = 0.;
zcoor = fgkModuleCoverThickness + (ytof*0.5 - fgkModuleCoverThickness)*0.5;
- char name[16];
-
- // Positioning of FEA cards and services containers (FAIA and FAIB)
+ char name[kSize];
+ // Positioning of FEA cards and services containers (FAIA, FAIC and FAIB)
for(Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) {
if(fTOFSectors[isec]==-1)continue;
- sprintf(name, "BTOF%d",isec);
- //if (fTOFHoles && (isec==16||isec==17)) \\Old 6h convention
- if (fTOFHoles && (isec==13 || isec==14 || isec==15))
- gMC->Gspos("FAIB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
- else
+ snprintf(name, kSize, "BTOF%d",isec);
+ if (fgkFEAwithMasks[isec])
gMC->Gspos("FAIA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ else {
+ if (fTOFHoles && (isec==13 || isec==14 || isec==15))
+ gMC->Gspos("FAIB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ else
+ gMC->Gspos("FAIC", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ }
}
}
// Insert FSTR volume in FLTA/B/C volumes
//
- // module wall thickness (cm)
- //const Float_t fgkModuleWallThickness = 0.33;
-
- //const Float_t fgkInterCentrModBorder1 = 49.5;
-
Float_t yFLT = ytof*0.5 - fgkModuleWallThickness;
Int_t *idtmed = fIdtmed->GetArray()-499;
// FSTR volume definition-filling this volume with non sensitive Gas Mixture
Float_t parfp[3]={klstripx*0.5, khstripy*0.5, kwstripz*0.5};
- gMC->Gsvolu("FSTR","BOX",idtmed[506],parfp,3); // Freon mix
+ gMC->Gsvolu("FSTR", "BOX", idtmed[506], parfp, 3); // Freon mix
Float_t posfp[3]={0.,0.,0.};
//parfp[0] = klstripx*0.5;
parfp[1] = khhony*0.5;
parfp[2] = kwhonz*0.5;
- gMC->Gsvolu("FHON","BOX",idtmed[501],parfp,3); // Nomex (Honeycomb)
+ gMC->Gsvolu("FHON", "BOX", idtmed[501], parfp, 3); // Nomex (Honeycomb)
// positioning 2 NOMEX Layers on FSTR volume
//posfp[0] = 0.;
posfp[1] =-khstripy*0.5 + parfp[1];
//posfp[2] = 0.;
- gMC->Gspos("FHON",1,"FSTR",0., posfp[1],0.,0,"ONLY");
- gMC->Gspos("FHON",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FHON", 1, "FSTR", 0., posfp[1], 0., 0, "ONLY");
+ gMC->Gspos("FHON", 2, "FSTR", 0.,-posfp[1], 0., 0, "ONLY");
// Lower PCB Layer definition
//parfp[0] = klstripx*0.5;
parfp[1] = khpcby*0.5;
parfp[2] = kwpcbz1*0.5;
- gMC->Gsvolu("FPC1","BOX",idtmed[502],parfp,3); // G10
+ gMC->Gsvolu("FPC1", "BOX", idtmed[502], parfp, 3); // G10
// Upper PCB Layer definition
//parfp[0] = klstripx*0.5;
//parfp[1] = khpcby*0.5;
parfp[2] = kwpcbz2*0.5;
- gMC->Gsvolu("FPC2","BOX",idtmed[502],parfp,3); // G10
+ gMC->Gsvolu("FPC2", "BOX", idtmed[502], parfp, 3); // G10
// positioning 2 external PCB Layers in FSTR volume
//posfp[0] = 0.;
posfp[1] =-khstripy*0.5+khhony+parfp[1];
//posfp[2] = 0.;
- gMC->Gspos("FPC1",1,"FSTR",0.,-posfp[1],0.,0,"ONLY");
- gMC->Gspos("FPC2",1,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FPC1", 1, "FSTR", 0.,-posfp[1], 0., 0, "ONLY");
+ gMC->Gspos("FPC2", 1, "FSTR", 0., posfp[1], 0., 0, "ONLY");
// Central PCB layer definition
//parfp[0] = klstripx*0.5;
parfp[1] = khcpcby*0.5;
parfp[2] = kwcpcbz*0.5;
- gMC->Gsvolu("FPCB","BOX",idtmed[502],parfp,3); // G10
+ gMC->Gsvolu("FPCB", "BOX", idtmed[502], parfp, 3); // G10
+ gGeoManager->GetVolume("FPCB")->VisibleDaughters(kFALSE);
// positioning the central PCB layer
- gMC->Gspos("FPCB",1,"FSTR",0.,0.,0.,0,"ONLY");
+ gMC->Gspos("FPCB", 1, "FSTR", 0., 0., 0., 0, "ONLY");
// Sensitive volume definition
Float_t parfs[3] = {klsensmx*0.5, khsensmy*0.5, kwsensmz*0.5};
- gMC->Gsvolu("FSEN","BOX",idtmed[507],parfs,3); // Cu sensitive
+ gMC->Gsvolu("FSEN", "BOX", idtmed[507], parfs, 3); // Cu sensitive
// dividing FSEN along z in knz=2 and along x in knx=48
- gMC->Gsdvn("FSEZ","FSEN",knz,3);
- gMC->Gsdvn("FPAD","FSEZ",knx,1);
+ gMC->Gsdvn("FSEZ", "FSEN", knz, 3);
+ gMC->Gsdvn("FPAD", "FSEZ", knx, 1);
// positioning sensitive layer inside FPCB
- gMC->Gspos("FSEN",1,"FPCB",0.,0.,0.,0,"ONLY");
+ gMC->Gspos("FSEN", 1, "FPCB", 0., 0., 0., 0, "ONLY");
// RED GLASS Layer definition
//parfp[0] = klstripx*0.5;
parfp[1] = khrgly*0.5;
parfp[2] = kwrglz*0.5;
- gMC->Gsvolu("FRGL","BOX",idtmed[508],parfp,3); // red glass
+ gMC->Gsvolu("FRGL", "BOX", idtmed[508], parfp, 3); // red glass
// positioning 4 RED GLASS Layers in FSTR volume
//posfp[0] = 0.;
posfp[1] = -khstripy*0.5+khhony+khpcby+parfp[1];
//posfp[2] = 0.;
- gMC->Gspos("FRGL",1,"FSTR",0., posfp[1],0.,0,"ONLY");
- gMC->Gspos("FRGL",4,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FRGL", 1, "FSTR", 0., posfp[1], 0., 0, "ONLY");
+ gMC->Gspos("FRGL", 4, "FSTR", 0.,-posfp[1], 0., 0, "ONLY");
//posfp[0] = 0.;
posfp[1] = (khcpcby+khrgly)*0.5;
//posfp[2] = 0.;
- gMC->Gspos("FRGL",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
- gMC->Gspos("FRGL",3,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FRGL", 2, "FSTR", 0.,-posfp[1], 0., 0, "ONLY");
+ gMC->Gspos("FRGL", 3, "FSTR", 0., posfp[1], 0., 0, "ONLY");
// GLASS Layer definition
//parfp[0] = klstripx*0.5;
parfp[1] = khglassy;
parfp[2] = kwglfz*0.5;
- gMC->Gsvolu("FGLF","BOX",idtmed[508],parfp,3); // glass
+ gMC->Gsvolu("FGLF", "BOX", idtmed[508], parfp, 3); // glass
// positioning 2 GLASS Layers in FSTR volume
//posfp[0] = 0.;
posfp[1] = (khcpcby + khglfy)*0.5 + khrgly;
//posfp[2] = 0.;
- gMC->Gspos("FGLF",1,"FSTR",0.,-posfp[1],0.,0,"ONLY");
- gMC->Gspos("FGLF",2,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FGLF", 1, "FSTR", 0.,-posfp[1], 0., 0, "ONLY");
+ gMC->Gspos("FGLF", 2, "FSTR", 0., posfp[1], 0., 0, "ONLY");
// Positioning the Strips (FSTR volumes) in the FLT volumes
Int_t maxStripNumbers [5] ={fTOFGeometry->NStripC(),
xpos = 0.;
ypos = fTOFGeometry->GetHeights(iplate,istrip) + yFLT*0.5;
zpos = fTOFGeometry->GetDistances(iplate,istrip);
- gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTA", xpos, ypos,-zpos,idrotm[istrip+totalStrip], "ONLY");
+ gMC->Gspos("FSTR", istrip+totalStrip+1, "FLTA", xpos, ypos,-zpos, idrotm[istrip+totalStrip], "ONLY");
if (fTOFHoles) {
if (istrip+totalStrip+1>53)
- gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTC", xpos, ypos,-zpos-(zlenA*0.5 - 2.*fgkModuleWallThickness + fgkInterCentrModBorder1)*0.5,idrotm[istrip+totalStrip],"ONLY");
+ gMC->Gspos("FSTR", istrip+totalStrip+1, "FLTC", xpos, ypos,-zpos-(zlenA*0.5 - 2.*fgkModuleWallThickness + fgkInterCentrModBorder1)*0.5, idrotm[istrip+totalStrip], "ONLY");
if (istrip+totalStrip+1<39)
- gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTB", xpos, ypos,-zpos+(zlenA*0.5 - 2.*fgkModuleWallThickness + fgkInterCentrModBorder1)*0.5,idrotm[istrip+totalStrip],"ONLY");
+ gMC->Gspos("FSTR", istrip+totalStrip+1, "FLTB", xpos, ypos,-zpos+(zlenA*0.5 - 2.*fgkModuleWallThickness + fgkInterCentrModBorder1)*0.5, idrotm[istrip+totalStrip], "ONLY");
}
}
}
// Define:
// - containers for FEA cards, cooling system
// signal cables and supermodule support structure
- // (volumes called FAIA/B),
+ // (volumes called FAIA/B/C),
// - containers for FEA cards and some cooling
// elements for a FEA (volumes called FCA1/2).
//
- // module cover between strips and cards (cm)
- //const Float_t fgkModuleCoverThickness = 2.;
-
- //const Float_t fgkFEAwidth1 = 19.;
- //const Float_t fgkFEAwidth2 = 38.5;
-
Int_t *idtmed = fIdtmed->GetArray()-499;
Int_t idrotm[1];
- // Definition of the air card containers (FAIA and FAIB)
+ // Definition of the air card containers (FAIA, FAIC and FAIB)
Float_t par[3];
par[0] = xtof*0.5;
par[2] = zlenA*0.5;
gMC->Gsvolu("FAIA", "BOX ", idtmed[500], par, 3); // Air
if (fTOFHoles) gMC->Gsvolu("FAIB", "BOX ", idtmed[500], par, 3); // Air
+ gMC->Gsvolu("FAIC", "BOX ", idtmed[500], par, 3); // Air
+
+ Float_t feaParam[3] = {fgkFEAparameters[0], fgkFEAparameters[1], fgkFEAparameters[2]};
+ Float_t feaRoof1[3] = {fgkRoof1parameters[0], fgkRoof1parameters[1], fgkRoof1parameters[2]};
+ Float_t al3[3] = {fgkAl3parameters[0], fgkAl3parameters[1], fgkAl3parameters[2]};
+ //Float_t feaRoof2[3] = {fgkRoof2parameters[0], fgkRoof2parameters[1], fgkRoof2parameters[2]};
// FEA card mother-volume definition
- Float_t carpar[3] = {fgkFEAwidth1*0.5, 5.6, 0.45};
+ Float_t carpar[3] = {xtof*0.5 - fgkCBLw - fgkSawThickness,
+ feaParam[1] + feaRoof1[1] + fgkRoof2parameters[1]*0.5,
+ feaRoof1[2] + fgkBetweenLandMask*0.5 + al3[2]};
gMC->Gsvolu("FCA1", "BOX ", idtmed[500], carpar, 3); // Air
- carpar[0] = fgkFEAwidth2*0.5;
- //carpar[1] = 5.6;
- //carpar[2] = 0.45;
gMC->Gsvolu("FCA2", "BOX ", idtmed[500], carpar, 3); // Air
// rotation matrix
Float_t rowstep = 6.66;
Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4};
Int_t rowb[5] = {6, 7, 6, 19, 7};
- Float_t carpos[3] = {25. - xtof*0.5,
- (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5,
- 0.};
+ Float_t carpos[3] = {0.,
+ -(ytof*0.5 - fgkModuleCoverThickness)*0.5 + carpar[1],
+ -0.8};
+ gMC->Gspos("FCA1", 91, "FAIA", carpos[0], carpos[1], carpos[2], 0, "MANY");
+ gMC->Gspos("FCA2", 91, "FAIC", carpos[0], carpos[1], carpos[2], 0, "MANY");
+
Int_t row = 1;
Int_t nrow = 0;
for (Int_t sg= -1; sg< 2; sg+= 2) {
- carpos[2] = sg*zlenA*0.5;
+ carpos[2] = sg*zlenA*0.5 - 0.8;
for (Int_t nb=0; nb<5; ++nb) {
carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
nrow = row + rowb[nb];
carpos[2] -= sg*rowstep;
if (nb==4) {
- gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], 0,"ONLY");
- gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], 0,"ONLY");
- gMC->Gspos("FCA2", row, "FAIA", 0.,carpos[1],carpos[2], 0,"ONLY");
+ gMC->Gspos("FCA1", row, "FAIA", carpos[0], carpos[1], carpos[2], 0, "ONLY");
+ gMC->Gspos("FCA2", row, "FAIC", carpos[0], carpos[1], carpos[2], 0, "ONLY");
}
else {
switch (sg) {
case 1:
- gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], 0,"ONLY");
- gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], 0,"ONLY");
- gMC->Gspos("FCA2", row, "FAIA", 0.,carpos[1],carpos[2], 0,"ONLY");
+ gMC->Gspos("FCA1", row, "FAIA", carpos[0], carpos[1], carpos[2], 0, "ONLY");
+ gMC->Gspos("FCA2", row, "FAIC", carpos[0], carpos[1], carpos[2], 0, "ONLY");
break;
case -1:
- gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], idrotm[0],"ONLY");
- gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], idrotm[0],"ONLY");
- gMC->Gspos("FCA2", row, "FAIA", 0.,carpos[1],carpos[2], idrotm[0],"ONLY");
+ gMC->Gspos("FCA1", row, "FAIA", carpos[0], carpos[1], carpos[2], idrotm[0], "ONLY");
+ gMC->Gspos("FCA2", row, "FAIC", carpos[0], carpos[1], carpos[2], idrotm[0], "ONLY");
break;
}
}
+
}
}
}
- gMC->Gspos("FCA1", 182, "FAIA", carpos[0],carpos[1],0., 0,"ONLY");
- gMC->Gspos("FCA1", 181, "FAIA",-carpos[0],carpos[1],0., 0,"ONLY");
- gMC->Gspos("FCA2", 91, "FAIA", 0., carpos[1], 0., 0, "ONLY");
-
if (fTOFHoles) {
row = 1;
for (Int_t sg= -1; sg< 2; sg+= 2) {
- carpos[2] = sg*zlenA*0.5;
+ carpos[2] = sg*zlenA*0.5 - 0.8;
for (Int_t nb=0; nb<4; ++nb) {
carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
nrow = row + rowb[nb];
switch (sg) {
case 1:
- gMC->Gspos("FCA1",2*row, "FAIB", carpos[0],carpos[1],carpos[2], 0,"ONLY");
- gMC->Gspos("FCA1",2*row-1,"FAIB",-carpos[0],carpos[1],carpos[2], 0,"ONLY");
- gMC->Gspos("FCA2", row, "FAIB", 0.,carpos[1],carpos[2], 0,"ONLY");
+ gMC->Gspos("FCA1", row, "FAIB", carpos[0], carpos[1], carpos[2], 0, "ONLY");
break;
case -1:
- gMC->Gspos("FCA1",2*row, "FAIB", carpos[0],carpos[1],carpos[2], idrotm[0],"ONLY");
- gMC->Gspos("FCA1",2*row-1,"FAIB",-carpos[0],carpos[1],carpos[2], idrotm[0],"ONLY");
- gMC->Gspos("FCA2", row, "FAIB", 0.,carpos[1],carpos[2], idrotm[0],"ONLY");
+ gMC->Gspos("FCA1", row, "FAIB", carpos[0], carpos[1], carpos[2], idrotm[0], "ONLY");
break;
}
}
}
//_____________________________________________________________________________
-void AliTOFv6T0::MakeFrontEndElectronics() const
+void AliTOFv6T0::MakeFrontEndElectronics(Float_t xtof) const
{
//
// Fill FCA1/2 volumes with FEA cards (FFEA volumes).
Int_t *idtmed = fIdtmed->GetArray()-499;
- //const Float_t fgkFEAwidth1 = 19.;
-
// FEA card volume definition
- Float_t feaParam1[3] = {fgkFEAwidth1*0.5, 5.6, 0.1};
- gMC->Gsvolu("FFEA", "BOX ", idtmed[502], feaParam1, 3); // G10
+ Float_t feaParam[3] = {fgkFEAparameters[0], fgkFEAparameters[1], fgkFEAparameters[2]};
+ gMC->Gsvolu("FFEA", "BOX ", idtmed[502], feaParam, 3); // G10
+
+ Float_t al1[3] = {fgkAl1parameters[0], fgkAl1parameters[1], fgkAl1parameters[2]};
+ Float_t al3[3] = {fgkAl3parameters[0], fgkAl3parameters[1], fgkAl3parameters[2]};
+ Float_t feaRoof1[3] = {fgkRoof1parameters[0], fgkRoof1parameters[1], fgkRoof1parameters[2]};
+ //Float_t feaRoof2[3] = {fgkRoof2parameters[0], fgkRoof2parameters[1], fgkRoof2parameters[2]};
+
+ Float_t carpar[3] = {xtof*0.5 - fgkCBLw - fgkSawThickness,
+ feaParam[1] + feaRoof1[1] + fgkRoof2parameters[1]*0.5,
+ feaRoof1[2] + fgkBetweenLandMask*0.5 + al3[2]};
// FEA card volume positioning
- Float_t carpar[3] = {fgkFEAwidth1*0.5, 5.6, 0.45};
- gMC->Gspos("FFEA", 1, "FCA1", 0., 0., -carpar[2]+feaParam1[2], 0, "ONLY");
- gMC->Gspos("FFEA", 2, "FCA2", -(feaParam1[0]+0.25), 0., -carpar[2]+feaParam1[2], 0, "ONLY");
- gMC->Gspos("FFEA", 3, "FCA2", (feaParam1[0]+0.25), 0., -carpar[2]+feaParam1[2], 0, "ONLY");
+ Float_t xCoor = xtof*0.5 - 25.;
+ Float_t yCoor =-carpar[1] + feaParam[1];
+ Float_t zCoor =-carpar[2] + (2.*feaRoof1[2] - 2.*al1[2] - feaParam[2]);
+ gMC->Gspos("FFEA", 1, "FCA1",-xCoor, yCoor, zCoor, 0, "ONLY");
+ gMC->Gspos("FFEA", 4, "FCA1", xCoor, yCoor, zCoor, 0, "ONLY");
+ gMC->Gspos("FFEA", 1, "FCA2",-xCoor, yCoor, zCoor, 0, "ONLY");
+ gMC->Gspos("FFEA", 4, "FCA2", xCoor, yCoor, zCoor, 0, "ONLY");
+ xCoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1);
+ gMC->Gspos("FFEA", 2, "FCA1",-xCoor, yCoor, zCoor, 0, "ONLY");
+ gMC->Gspos("FFEA", 3, "FCA1", xCoor, yCoor, zCoor, 0, "ONLY");
+ gMC->Gspos("FFEA", 2, "FCA2",-xCoor, yCoor, zCoor, 0, "ONLY");
+ gMC->Gspos("FFEA", 3, "FCA2", xCoor, yCoor, zCoor, 0, "ONLY");
}
//_____________________________________________________________________________
-void AliTOFv6T0::MakeFEACooling(Float_t xtof, Float_t ytof, Float_t zlenA) const
+void AliTOFv6T0::MakeFEACooling(Float_t xtof) const
{
//
// Make cooling system attached to each FEA card
// (FAL1, FRO1 and FBAR/1/2 volumes)
- // in FAIA/B and FCA1/2 volume containers.
+ // in FCA1/2 volume containers.
//
- // honeycomb layer between strips and cards (cm)
- //const Float_t fgkModuleCoverThickness = 2.;
-
Int_t *idtmed = fIdtmed->GetArray()-499;
- //const Float_t fgkFEAwidth1 = 19.;
-
- Float_t feaParam1[3] = {fgkFEAwidth1*0.5, 5.6, 0.1};
-
// first FEA cooling element definition
- Float_t al1[3] = {fgkFEAwidth1*0.5, 0.4, 0.2};
+ Float_t al1[3] = {fgkAl1parameters[0], fgkAl1parameters[1], fgkAl1parameters[2]};
gMC->Gsvolu("FAL1", "BOX ", idtmed[504], al1, 3); // Al
- // first FEA cooling element positioning
- Float_t carpar[3] = {fgkFEAwidth1*0.5, 5.6, 0.45};
- gMC->Gspos("FAL1", 1, "FCA1", 0., carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY");
- gMC->Gspos("FAL1", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY");
- gMC->Gspos("FAL1", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY");
-
- // second FEA cooling element difinition
- //Float_t feaRoof1[3] = {9.5, 0.2, 1.45};
- Float_t feaRoof1[3] = {al1[0], al1[2], 1.45};
- gMC->Gsvolu("FRO1", "BOX ", idtmed[504], feaRoof1, 3); // Al
-
- // third FEA cooling element difinition
- Float_t bar[3] = {8.575, 0.6, 0.25};
- gMC->Gsvolu("FBAR", "BOX ", idtmed[504], bar, 3); // Al
-
- // fourth FEA cooling element difinition
- //Float_t bar1[3] = {8.575, 0.6, 0.1};
- Float_t bar1[3] = {bar[0], bar[1], 0.1};
- gMC->Gsvolu("FBA1", "BOX ", idtmed[504], bar1, 3); // Al
-
- // fifth FEA cooling element difinition
- //Float_t bar2[3] = {8.575, 0.1, 0.4};
- Float_t bar2[3] = {bar[0], 0.1, bar[1]-2.*bar[2]};
- gMC->Gsvolu("FBA2", "BOX ", idtmed[504], bar2, 3); // Al
-
- //const Float_t fgkCBLw = 13.5; // width of lateral cables and tubes block
-
- Float_t tubepar[3] = {0., 0.4, xtof*0.5 - fgkCBLw};
-
- // FEA cooling components positioning
- Float_t rowstep = 6.66;
- Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4};
- Int_t rowb[5] = {6, 7, 6, 19, 7};
- Float_t carpos[3] = {25. - xtof*0.5,
- (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5,
- 0.};
- Int_t row = 1;
- Int_t nrow = 0;
- for (Int_t sg= -1; sg< 2; sg+= 2) {
- carpos[2] = sg*zlenA*0.5;
- for (Int_t nb=0; nb<5; ++nb) {
- carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
- nrow = row + rowb[nb];
- for ( ; row < nrow ; ++row) {
-
- carpos[2] -= sg*rowstep;
-
- if (nb==4) {
-
- gMC->Gspos("FBAR",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
-
- gMC->Gspos("FBA1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
- gMC->Gspos("FBA1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
- gMC->Gspos("FBA1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
- gMC->Gspos("FBA1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
-
- gMC->Gspos("FBA2",8*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
-
- gMC->Gspos("FBA2",8*row-4,"FAIA", carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-5,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-6,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-7,"FAIA",-carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
-
-
- gMC->Gspos("FRO1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
-
- }
- else {
-
- gMC->Gspos("FBAR",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
-
- gMC->Gspos("FBA1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
- gMC->Gspos("FBA1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
- gMC->Gspos("FBA1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
- gMC->Gspos("FBA1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
-
- gMC->Gspos("FBA2",8*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
-
- gMC->Gspos("FBA2",8*row-4,"FAIA", carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-5,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-6,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-7,"FAIA",-carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
-
- gMC->Gspos("FRO1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
-
- }
- }
- }
- }
-
- gMC->Gspos("FBAR",364, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
- gMC->Gspos("FBAR",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
- gMC->Gspos("FBAR",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
- gMC->Gspos("FBAR",361, "FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
-
- gMC->Gspos("FBA1",364, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
- gMC->Gspos("FBA1",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
- gMC->Gspos("FBA1",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
- gMC->Gspos("FBA1",361, "FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
-
- gMC->Gspos("FBA2",728, "FAIA", carpos[0],carpos[1]+carpar[1]-bar2[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",727, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",726, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",725, "FAIA",-carpos[0],carpos[1]+carpar[1]-bar2[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",724,"FAIA", carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",723,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",722,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",721,"FAIA",-carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
-
- gMC->Gspos("FRO1",364, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",361, "FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+ // second FEA cooling element definition
+ Float_t feaRoof1[3] = {fgkRoof1parameters[0], fgkRoof1parameters[1], fgkRoof1parameters[2]};
+ gMC->Gsvolu("FRO1", "BOX ", idtmed[504], feaRoof1, 3); // Al
+ Float_t al3[3] = {fgkAl3parameters[0], fgkAl3parameters[1], fgkAl3parameters[2]};
+ //Float_t feaRoof2[3] = {fgkRoof2parameters[0], fgkRoof2parameters[1], fgkRoof2parameters[2]};
- if (fTOFHoles) {
- row = 1;
- for (Int_t sg= -1; sg< 2; sg+= 2) {
- carpos[2] = sg*zlenA*0.5;
- for (Int_t nb=0; nb<4; ++nb) {
- carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
- nrow = row + rowb[nb];
- for ( ; row < nrow ; ++row) {
- carpos[2] -= sg*rowstep;
+ // definition and positioning of a small air groove in the FRO1 volume
+ Float_t airHole[3] = {fgkRoof2parameters[0], fgkRoof2parameters[1]*0.5, feaRoof1[2]};
+ gMC->Gsvolu("FREE", "BOX ", idtmed[500], airHole, 3); // Air
+ gMC->Gspos("FREE", 1, "FRO1", 0., feaRoof1[1]-airHole[1], 0., 0, "ONLY");
+ gGeoManager->GetVolume("FRO1")->VisibleDaughters(kFALSE);
- gMC->Gspos("FBAR",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+ // third FEA cooling element definition
+ Float_t bar[3] = {fgkBar[0], fgkBar[1], fgkBar[2]};
+ gMC->Gsvolu("FBAR", "BOX ", idtmed[504], bar, 3); // Al
- gMC->Gspos("FBA1",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
- gMC->Gspos("FBA1",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
- gMC->Gspos("FBA1",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
- gMC->Gspos("FBA1",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+ Float_t feaParam[3] = {fgkFEAparameters[0], fgkFEAparameters[1], fgkFEAparameters[2]};
- gMC->Gspos("FBA2",8*row, "FAIB", carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ Float_t carpar[3] = {xtof*0.5 - fgkCBLw - fgkSawThickness,
+ feaParam[1] + feaRoof1[1] + fgkRoof2parameters[1]*0.5,
+ feaRoof1[2] + fgkBetweenLandMask*0.5 + al3[2]};
- gMC->Gspos("FBA2",8*row-4,"FAIB", carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-5,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-6,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
- gMC->Gspos("FBA2",8*row-7,"FAIB",-carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ // fourth FEA cooling element definition
+ Float_t bar1[3] = {fgkBar1[0], fgkBar1[1], fgkBar1[2]};
+ gMC->Gsvolu("FBA1", "BOX ", idtmed[504], bar1, 3); // Al
- gMC->Gspos("FRO1",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+ // fifth FEA cooling element definition
+ Float_t bar2[3] = {fgkBar2[0], fgkBar2[1], fgkBar2[2]};
+ gMC->Gsvolu("FBA2", "BOX ", idtmed[504], bar2, 3); // Al
- }
- }
- }
- }
+ // first FEA cooling element positioning
+ Float_t xcoor = xtof*0.5 - 25.;
+ Float_t ycoor = carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - al1[1];
+ Float_t zcoor =-carpar[2] + 2.*feaRoof1[2] - al1[2];
+ gMC->Gspos("FAL1", 1, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FAL1", 4, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FAL1", 1, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FAL1", 4, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY");
+ xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1);
+ gMC->Gspos("FAL1", 2, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FAL1", 3, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FAL1", 2, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FAL1", 3, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY");
+
+ // second FEA cooling element positioning
+ xcoor = xtof*0.5 - 25.;
+ ycoor = carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - feaRoof1[1];
+ zcoor =-carpar[2] + feaRoof1[2];
+ gMC->Gspos("FRO1", 1, "FCA1",-xcoor, ycoor, zcoor, 0, "MANY"); // (AdC)
+ gMC->Gspos("FRO1", 4, "FCA1", xcoor, ycoor, zcoor, 0, "MANY"); // (AdC)
+ gMC->Gspos("FRO1", 1, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FRO1", 4, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY");
+ xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1);
+ gMC->Gspos("FRO1", 2, "FCA1",-xcoor, ycoor, zcoor, 0, "MANY"); // (AdC)
+ gMC->Gspos("FRO1", 3, "FCA1", xcoor, ycoor, zcoor, 0, "MANY"); // (AdC)
+ gMC->Gspos("FRO1", 2, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FRO1", 3, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY");
+
+ // third FEA cooling element positioning
+ xcoor = xtof*0.5 - 25.;
+ ycoor = carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - bar[1];
+ zcoor =-carpar[2] + bar[2];
+ gMC->Gspos("FBAR", 1, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBAR", 4, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBAR", 1, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBAR", 4, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY");
+ xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1);
+ gMC->Gspos("FBAR", 2, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBAR", 3, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBAR", 2, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBAR", 3, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY");
+
+ // fourth FEA cooling element positioning
+ Float_t tubepar[3] = {0., 0.4, xtof*0.5 - fgkCBLw};
+ xcoor = xtof*0.5 - 25.;
+ ycoor = carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - bar[1];
+ zcoor =-carpar[2] + 2.*bar[2] + 2.*tubepar[1] + bar1[2];
+ gMC->Gspos("FBA1", 1, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA1", 4, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA1", 1, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA1", 4, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY");
+ xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1);
+ gMC->Gspos("FBA1", 2, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA1", 3, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA1", 2, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA1", 3, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY");
+
+ // fifth FEA cooling element positioning
+ xcoor = xtof*0.5 - 25.;
+ ycoor = carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - bar2[1];
+ zcoor =-carpar[2] + 2.*bar[2] + bar2[2];
+ gMC->Gspos("FBA2", 1, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA2", 4, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA2", 1, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA2", 4, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY");
+ xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1);
+ gMC->Gspos("FBA2", 2, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA2", 3, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA2", 2, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA2", 3, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY");
+
+ xcoor = xtof*0.5 - 25.;
+ ycoor = carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - 2.*bar2[1] - 2.*tubepar[1] - bar2[1];
+ zcoor =-carpar[2] + 2.*bar[2] + bar2[2];
+ gMC->Gspos("FBA2", 5, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA2", 8, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA2", 5, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA2", 8, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY");
+ xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1);
+ gMC->Gspos("FBA2", 6, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA2", 7, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA2", 6, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBA2", 7, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY");
}
//_____________________________________________________________________________
-void AliTOFv6T0::MakeNinoMask(Float_t xtof, Float_t ytof, Float_t zlenA) const
+void AliTOFv6T0::MakeNinoMask(Float_t xtof) const
{
//
// Make cooling Nino mask
- // for each FEA card (FAL2/3 and FRO2/3/4 volumes)
- // in FAIA/B and FCA1/2 volume containers.
+ // for each FEA card (FAL2/3 and FRO2 volumes)
+ // in FCA1 volume container.
//
- // honeycomb layer between strips and cards (cm)
- //const Float_t fgkModuleCoverThickness = 2.;
-
Int_t *idtmed = fIdtmed->GetArray()-499;
- //const Float_t fgkFEAwidth1 = 19.;
-
// first Nino ASIC mask volume definition
- Float_t al2[3] = {7.25, 0.75, 0.25};
+ Float_t al2[3] = {fgkAl2parameters[0], fgkAl2parameters[1], fgkAl2parameters[2]};
gMC->Gsvolu("FAL2", "BOX ", idtmed[504], al2, 3); // Al
// second Nino ASIC mask volume definition
- Float_t al3[3] = {3., 3.75, 0.1};
+ Float_t al3[3] = {fgkAl3parameters[0], fgkAl3parameters[1], fgkAl3parameters[2]};
gMC->Gsvolu("FAL3", "BOX ", idtmed[504], al3, 3); // Al
- // first Nino ASIC mask volume positioning
- Float_t feaParam1[3] = {fgkFEAwidth1*0.5, 5.6, 0.1};
- Float_t carpar[3] = {fgkFEAwidth1*0.5, 5.6, 0.45};
- gMC->Gspos("FAL2", 1, "FCA1", 0., carpar[1]-2.*al3[1]+0.25, carpar[2]-2.*al3[2]-al2[2], 0, "ONLY");
- gMC->Gspos("FAL2", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-2.*al3[1]+0.25, carpar[2]-2.*al3[2]-al2[2], 0, "ONLY");
- gMC->Gspos("FAL2", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-2.*al3[1]+0.25, carpar[2]-2.*al3[2]-al2[2], 0, "ONLY");
-
- // second Nino ASIC mask volume positioning
- gMC->Gspos("FAL3", 1, "FCA1", 0., carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY");
- gMC->Gspos("FAL3", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY");
- gMC->Gspos("FAL3", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY");
-
- //Float_t feaRoof1[3] = {9.5, 0.2, 1.45};
- Float_t feaRoof1[3] = {fgkFEAwidth1*0.5, 0.2, 1.45};
-
// third Nino ASIC mask volume definition
- //Float_t feaRoof2[3] = {3.35, 0.05, 1.05};
- Float_t feaRoof2[3] = {al3[0], 0.05, 1.05};
+ Float_t feaRoof2[3] = {fgkRoof2parameters[0], fgkRoof2parameters[1], fgkRoof2parameters[2]};
gMC->Gsvolu("FRO2", "BOX ", idtmed[504], feaRoof2, 3); // Al
- // fourth Nino ASIC mask volume definition
- //Float_t feaRoof3[3] = {3.35, feaRoof1[1]+feaRoof2[1], 0.1};
- Float_t feaRoof3[3] = {al3[0], feaRoof1[1]+feaRoof2[1], 0.1};
- gMC->Gsvolu("FRO3", "BOX ", idtmed[504], feaRoof3, 3); // Al
-
- // fifth Nino ASIC mask volume definition
- Float_t feaRoof4[3] = {al3[0], 0.05, carpar[2]-feaParam1[2]-feaRoof1[1]-al3[2]};
- gMC->Gsvolu("FRO4", "BOX ", idtmed[504], feaRoof4, 3); // Al
-
- // other Nino ASIC mask volumes positioning
- Float_t rowstep = 6.66;
- Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4};
- Int_t rowb[5] = {6, 7, 6, 19, 7};
- Float_t carpos[3] = {25. - xtof*0.5,
- (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5,
- 0.};
- Int_t row = 1;
- Int_t nrow = 0;
- for (Int_t sg= -1; sg< 2; sg+= 2) {
- carpos[2] = sg*zlenA*0.5;
- for (Int_t nb=0; nb<5; ++nb) {
- carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
- nrow = row + rowb[nb];
- for ( ; row < nrow ; ++row) {
-
- carpos[2] -= sg*rowstep;
-
- if (nb==4) {
-
- gMC->Gspos("FRO2",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
- gMC->Gspos("FRO2",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
- gMC->Gspos("FRO2",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
- gMC->Gspos("FRO2",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
-
- gMC->Gspos("FRO3",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+(carpar[2]-feaRoof3[2]), 0,"ONLY");
- gMC->Gspos("FRO3",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+(carpar[2]-feaRoof3[2]), 0,"ONLY");
- gMC->Gspos("FRO3",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+(carpar[2]-feaRoof3[2]), 0,"ONLY");
- gMC->Gspos("FRO3",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+(carpar[2]-feaRoof3[2]), 0,"ONLY");
-
- gMC->Gspos("FRO4",4*row, "FAIA", carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
- gMC->Gspos("FRO4",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
- gMC->Gspos("FRO4",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
- gMC->Gspos("FRO4",4*row-3,"FAIA",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
-
- }
- else {
-
- gMC->Gspos("FRO2",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
- gMC->Gspos("FRO2",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
- gMC->Gspos("FRO2",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
- gMC->Gspos("FRO2",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
-
- gMC->Gspos("FRO3",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY");
- gMC->Gspos("FRO3",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY");
- gMC->Gspos("FRO3",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY");
- gMC->Gspos("FRO3",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY");
-
- gMC->Gspos("FRO4",4*row, "FAIA", carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
- gMC->Gspos("FRO4",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
- gMC->Gspos("FRO4",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
- gMC->Gspos("FRO4",4*row-3,"FAIA",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
-
- }
- }
- }
- }
-
- gMC->Gspos("FRO2",364, "FAIA", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
- gMC->Gspos("FRO2",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
- gMC->Gspos("FRO2",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
- gMC->Gspos("FRO2",361, "FAIA",-carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
-
- gMC->Gspos("FRO3",364, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof3[1],(carpar[2]-feaRoof3[2]), 0,"ONLY");
- gMC->Gspos("FRO3",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],(carpar[2]-feaRoof3[2]), 0,"ONLY");
- gMC->Gspos("FRO3",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],(carpar[2]-feaRoof3[2]), 0,"ONLY");
- gMC->Gspos("FRO3",361, "FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof3[1],(carpar[2]-feaRoof3[2]), 0,"ONLY");
-
- gMC->Gspos("FRO4",364, "FAIA", carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
- gMC->Gspos("FRO4",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
- gMC->Gspos("FRO4",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
- gMC->Gspos("FRO4",361, "FAIA",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
-
-
- if (fTOFHoles) {
- row = 1;
- for (Int_t sg= -1; sg< 2; sg+= 2) {
- carpos[2] = sg*zlenA*0.5;
- for (Int_t nb=0; nb<4; ++nb) {
- carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
- nrow = row + rowb[nb];
- for ( ; row < nrow ; ++row) {
- carpos[2] -= sg*rowstep;
-
- gMC->Gspos("FRO2",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
- gMC->Gspos("FRO2",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
- gMC->Gspos("FRO2",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
- gMC->Gspos("FRO2",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
+ Float_t feaRoof1[3] = {fgkRoof1parameters[0], fgkRoof1parameters[1], fgkRoof1parameters[2]};
+ Float_t feaParam[3] = {fgkFEAparameters[0], fgkFEAparameters[1], fgkFEAparameters[2]};
- gMC->Gspos("FRO3",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY");
- gMC->Gspos("FRO3",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY");
- gMC->Gspos("FRO3",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY");
- gMC->Gspos("FRO3",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY");
+ Float_t carpar[3] = {xtof*0.5 - fgkCBLw - fgkSawThickness,
+ feaParam[1] + feaRoof1[1] + fgkRoof2parameters[1]*0.5,
+ feaRoof1[2] + fgkBetweenLandMask*0.5 + al3[2]};
- gMC->Gspos("FRO4",4*row, "FAIB", carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
- gMC->Gspos("FRO4",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
- gMC->Gspos("FRO4",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
- gMC->Gspos("FRO4",4*row-3,"FAIB",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
+ // first Nino ASIC mask volume positioning
+ Float_t xcoor = xtof*0.5 - 25.;
+ Float_t ycoor = carpar[1] - 2.*al3[1];
+ Float_t zcoor = carpar[2] - 2.*al3[2] - al2[2];
+ gMC->Gspos("FAL2", 1, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FAL2", 4, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY");
+ xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1);
+ gMC->Gspos("FAL2", 2, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FAL2", 3, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY");
- }
- }
- }
- }
+ // second Nino ASIC mask volume positioning
+ xcoor = xtof*0.5 - 25.;
+ ycoor = carpar[1] - al3[1];
+ zcoor = carpar[2] - al3[2];
+ gMC->Gspos("FAL3", 1, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FAL3", 4, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY");
+ xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1);
+ gMC->Gspos("FAL3", 2, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FAL3", 3, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY");
+
+ // third Nino ASIC mask volume positioning
+ xcoor = xtof*0.5 - 25.;
+ ycoor = carpar[1] - fgkRoof2parameters[1];
+ zcoor = carpar[2] - 2.*al3[2] - fgkRoof2parameters[2];
+ gMC->Gspos("FRO2", 1, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FRO2", 4, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY");
+ xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1);
+ gMC->Gspos("FRO2", 2, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FRO2", 3, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY");
}
{
//
// Make cooling tubes (FTUB volume)
- // and cooling bars (FTLN and FLTN volumes)
- // in FAIA/B volume containers.
+ // and cooling bars (FTLN and FLO1/2/3 volumes)
+ // in FAIA/B/C volume containers.
//
- //const Float_t fgkInterCentrModBorder2 = 57.5;
-
- // honeycomb layer between strips and cards (cm)
- //const Float_t fgkModuleCoverThickness = 2.;
-
Int_t *idtmed = fIdtmed->GetArray()-499;
Int_t idrotm[1];
- //const Float_t fgkFEAwidth1 = 19.;
-
- //const Float_t fgkCBLw = 13.5; // width of lateral cables and tubes block
- //const Float_t fgkSawThickness = 1.;
-
// cooling tube volume definition
Float_t tubepar[3] = {0., 0.4, xtof*0.5 - fgkCBLw - fgkSawThickness};
gMC->Gsvolu("FTUB", "TUBE", idtmed[512], tubepar, 3); // Cu
gMC->Gsvolu("FITU", "TUBE", idtmed[509], tubeparW, 3); // H2O
// Positioning of the water tube into the steel one
- gMC->Gspos("FITU",1,"FTUB",0.,0.,0.,0,"ONLY");
+ gMC->Gspos("FITU", 1, "FTUB", 0., 0., 0., 0, "ONLY");
// definition of transverse components of SM cooling system
- Float_t lonpar[3] = {tubepar[2], 6.15, 0.7};
- gMC->Gsvolu("FTLN", "BOX ", idtmed[504], lonpar, 3); // Al
- lonpar[0] = 2.;
- lonpar[1] = 1.;
- lonpar[2] = zlenA*0.5;
- // definition of longitudinal components of SM cooling system
- gMC->Gsvolu("FLON", "BOX ", idtmed[504], lonpar, 3); // Al
- if (fTOFHoles) {
- lonpar[2] = (zlenA*0.5 - fgkInterCentrModBorder2)*0.5;
- gMC->Gsvolu("FLOB", "BOX ", idtmed[504], lonpar, 3); // Al
- }
+ Float_t trapar[3] = {tubepar[2], 6.175/*6.15*/, 0.7};
+ gMC->Gsvolu("FTLN", "BOX ", idtmed[504], trapar, 3); // Al
// rotation matrix
AliMatrix(idrotm[0], 180., 90., 90., 90., 90., 0.);
- // Positioning of cooling tubes and transverse components of SM
- // cooling system
- Float_t carpar[3] = {fgkFEAwidth1*0.5, 5.6, 0.45};
- Float_t feaParam1[3] = {fgkFEAwidth1*0.5, 5.6, 0.1};
- Float_t al1[3] = {fgkFEAwidth1*0.5, 0.4, 0.2};
- Float_t feaRoof1[3] = {al1[0], al1[2], 1.45};
- Float_t bar[3] = {8.575, 0.6, 0.25};
- Float_t rowstep = 6.66;
- Float_t ytub= 3.65;
- Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4};
- Int_t rowb[5] = {6, 7, 6, 19, 7};
- Float_t carpos[3] = {25. - xtof*0.5,
- (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5,
- 0.};
- Int_t row = 1;
- Int_t nrow = 0;
- for (Int_t sg= -1; sg< 2; sg+= 2) {
- carpos[2] = sg*zlenA*0.5;
- for (Int_t nb=0; nb<5; ++nb) {
- carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
- nrow = row + rowb[nb];
- for ( ; row < nrow ; ++row) {
+ Float_t feaParam[3] = {fgkFEAparameters[0], fgkFEAparameters[1], fgkFEAparameters[2]};
+ Float_t feaRoof1[3] = {fgkRoof1parameters[0], fgkRoof1parameters[1], fgkRoof1parameters[2]};
+ Float_t bar[3] = {fgkBar[0], fgkBar[1], fgkBar[2]};
+ Float_t bar2[3] = {fgkBar2[0], fgkBar2[1], fgkBar2[2]};
+ Float_t al3[3] = {fgkAl3parameters[0], fgkAl3parameters[1], fgkAl3parameters[2]};
+ //Float_t feaRoof2[3] = {fgkRoof2parameters[0], fgkRoof2parameters[1], fgkRoof2parameters[2]};
- carpos[2] -= sg*rowstep;
+ Float_t carpar[3] = {xtof*0.5 - fgkCBLw - fgkSawThickness,
+ feaParam[1] + feaRoof1[1] + fgkRoof2parameters[1]*0.5,
+ feaRoof1[2] + fgkBetweenLandMask*0.5 + al3[2]};
- if (nb==4)
- gMC->Gspos("FTUB", row, "FAIA", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), idrotm[0], "ONLY");
- else
- gMC->Gspos("FTUB", row, "FAIA", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), idrotm[0], "ONLY");
- }
- }
- gMC->Gspos("FTLN", 5+4*sg, "FAIA", 0., -0.1, 369.9*sg, 0, "ONLY");
- gMC->Gspos("FTLN", 5+3*sg, "FAIA", 0., -0.1, 366.9*sg, 0, "ONLY");
- gMC->Gspos("FTLN", 5+2*sg, "FAIA", 0., -0.1, 198.8*sg, 0, "ONLY");
- gMC->Gspos("FTLN", 5+sg, "FAIA", 0., -0.1, 56.82*sg, 0, "ONLY");
- }
+ Float_t ytub =-(ytof*0.5 - fgkModuleCoverThickness)*0.5 + carpar[1] +
+ carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - 2.*bar2[1] - tubepar[1];
+
+ // Positioning of tubes for the SM cooling system
+ Float_t ycoor = carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - 2.*bar2[1] - tubepar[1];
+ Float_t zcoor =-carpar[2] + 2.*bar[2] + tubepar[1];
+ gMC->Gspos("FTUB", 1, "FCA1", 0., ycoor, zcoor, idrotm[0], "ONLY");
+ gMC->Gspos("FTUB", 1, "FCA2", 0., ycoor, zcoor, idrotm[0], "ONLY");
+ gGeoManager->GetVolume("FTUB")->VisibleDaughters(kFALSE);
- gMC->Gspos("FTUB", 91, "FAIA", 0., carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), idrotm[0], "ONLY");
+ Float_t yFLTN = trapar[1] - (ytof*0.5 - fgkModuleCoverThickness)*0.5;
+ for (Int_t sg= -1; sg< 2; sg+= 2) {
+ // Positioning of transverse components for the SM cooling system
+ gMC->Gspos("FTLN", 5+4*sg, "FAIA", 0., yFLTN, 369.9*sg, 0, "MANY");
+ gMC->Gspos("FTLN", 5+3*sg, "FAIA", 0., yFLTN, 366.9*sg, 0, "MANY");
+ gMC->Gspos("FTLN", 5+2*sg, "FAIA", 0., yFLTN, 198.8*sg, 0, "MANY");
+ gMC->Gspos("FTLN", 5+sg, "FAIA", 0., yFLTN, 56.82*sg, 0, "MANY");
+ gMC->Gspos("FTLN", 5+4*sg, "FAIC", 0., yFLTN, 369.9*sg, 0, "MANY");
+ gMC->Gspos("FTLN", 5+3*sg, "FAIC", 0., yFLTN, 366.9*sg, 0, "MANY");
+ gMC->Gspos("FTLN", 5+2*sg, "FAIC", 0., yFLTN, 198.8*sg, 0, "MANY");
+ gMC->Gspos("FTLN", 5+sg, "FAIC", 0., yFLTN, 56.82*sg, 0, "MANY");
+ }
- gMC->Gspos("FLON", 2, "FAIA",-24., ytub+1.4, 0., 0, "MANY");
- gMC->Gspos("FLON", 1, "FAIA", 24., ytub+1.4, 0., 0, "MANY");
+ // definition of longitudinal components of SM cooling system
+ Float_t lonpar1[3] = {2., 0.5, 56.82 - trapar[2]};
+ Float_t lonpar2[3] = {lonpar1[0], lonpar1[1], (198.8 - 56.82)*0.5 - trapar[2]};
+ Float_t lonpar3[3] = {lonpar1[0], lonpar1[1], (366.9 - 198.8)*0.5 - trapar[2]};
+ gMC->Gsvolu("FLO1", "BOX ", idtmed[504], lonpar1, 3); // Al
+ gMC->Gsvolu("FLO2", "BOX ", idtmed[504], lonpar2, 3); // Al
+ gMC->Gsvolu("FLO3", "BOX ", idtmed[504], lonpar3, 3); // Al
+
+ // Positioning of longitudinal components for the SM cooling system
+ ycoor = ytub + (tubepar[1] + 2.*bar2[1] + lonpar1[1]);
+ gMC->Gspos("FLO1", 4, "FAIA",-24., ycoor, 0., 0, "MANY");
+ gMC->Gspos("FLO1", 2, "FAIA", 24., ycoor, 0., 0, "MANY");
+ gMC->Gspos("FLO1", 4, "FAIC",-24., ycoor, 0., 0, "MANY");
+ gMC->Gspos("FLO1", 2, "FAIC", 24., ycoor, 0., 0, "MANY");
+
+ zcoor = (198.8 + 56.82)*0.5;
+ gMC->Gspos("FLO2", 4, "FAIA",-24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO2", 2, "FAIA", 24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO2", 4, "FAIC",-24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO2", 2, "FAIC", 24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO2", 8, "FAIA",-24., ycoor, zcoor, 0, "MANY");
+ gMC->Gspos("FLO2", 6, "FAIA", 24., ycoor, zcoor, 0, "MANY");
+ gMC->Gspos("FLO2", 8, "FAIC",-24., ycoor, zcoor, 0, "MANY");
+ gMC->Gspos("FLO2", 6, "FAIC", 24., ycoor, zcoor, 0, "MANY");
+
+ zcoor = (366.9 + 198.8)*0.5;
+ gMC->Gspos("FLO3", 4, "FAIA",-24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO3", 2, "FAIA", 24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO3", 4, "FAIC",-24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO3", 2, "FAIC", 24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO3", 8, "FAIA",-24., ycoor, zcoor, 0, "MANY");
+ gMC->Gspos("FLO3", 6, "FAIA", 24., ycoor, zcoor, 0, "MANY");
+ gMC->Gspos("FLO3", 8, "FAIC",-24., ycoor, zcoor, 0, "MANY");
+ gMC->Gspos("FLO3", 6, "FAIC", 24., ycoor, zcoor, 0, "MANY");
+
+ ycoor = ytub - (tubepar[1] + 2.*bar2[1] + lonpar1[1]);
+ gMC->Gspos("FLO1", 3, "FAIA",-24., ycoor, 0., 0, "MANY");
+ gMC->Gspos("FLO1", 1, "FAIA", 24., ycoor, 0., 0, "MANY");
+ gMC->Gspos("FLO1", 3, "FAIC",-24., ycoor, 0., 0, "MANY");
+ gMC->Gspos("FLO1", 1, "FAIC", 24., ycoor, 0., 0, "MANY");
+
+ zcoor = (198.8 + 56.82)*0.5;
+ gMC->Gspos("FLO2", 3, "FAIA",-24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO2", 1, "FAIA", 24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO2", 3, "FAIC",-24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO2", 1, "FAIC", 24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO2", 7, "FAIA",-24., ycoor, zcoor, 0, "MANY");
+ gMC->Gspos("FLO2", 5, "FAIA", 24., ycoor, zcoor, 0, "MANY");
+ gMC->Gspos("FLO2", 7, "FAIC",-24., ycoor, zcoor, 0, "MANY");
+ gMC->Gspos("FLO2", 5, "FAIC", 24., ycoor, zcoor, 0, "MANY");
+
+ zcoor = (366.9 + 198.8)*0.5;
+ gMC->Gspos("FLO3", 3, "FAIA",-24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO3", 1, "FAIA", 24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO3", 3, "FAIC",-24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO3", 1, "FAIC", 24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO3", 7, "FAIA",-24., ycoor, zcoor, 0, "MANY");
+ gMC->Gspos("FLO3", 5, "FAIA", 24., ycoor, zcoor, 0, "MANY");
+ gMC->Gspos("FLO3", 7, "FAIC",-24., ycoor, zcoor, 0, "MANY");
+ gMC->Gspos("FLO3", 5, "FAIC", 24., ycoor, zcoor, 0, "MANY");
+ Float_t carpos[3] = {25. - xtof*0.5,
+ (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5,
+ 0.};
if (fTOFHoles) {
- row = 1;
for (Int_t sg= -1; sg< 2; sg+= 2) {
carpos[2] = sg*zlenA*0.5;
- for (Int_t nb=0; nb<4; ++nb) {
- carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
- nrow = row + rowb[nb];
- for ( ; row < nrow ; ++row) {
- carpos[2] -= sg*rowstep;
- gMC->Gspos("FTUB", row, "FAIB", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), idrotm[0], "ONLY");
- }
- }
-
- gMC->Gspos("FTLN", 5+4*sg, "FAIB", 0., -0.1, 369.9*sg, 0, "ONLY");
- gMC->Gspos("FTLN", 5+3*sg, "FAIB", 0., -0.1, 366.9*sg, 0, "ONLY");
- gMC->Gspos("FTLN", 5+2*sg, "FAIB", 0., -0.1, 198.8*sg, 0, "ONLY");
- gMC->Gspos("FTLN", 5+sg, "FAIB", 0., -0.1, 56.82*sg, 0, "ONLY");
+ gMC->Gspos("FTLN", 5+4*sg, "FAIB", 0., yFLTN, 369.9*sg, 0, "MANY");
+ gMC->Gspos("FTLN", 5+3*sg, "FAIB", 0., yFLTN, 366.9*sg, 0, "MANY");
+ gMC->Gspos("FTLN", 5+2*sg, "FAIB", 0., yFLTN, 198.8*sg, 0, "MANY");
+ gMC->Gspos("FTLN", 5+sg, "FAIB", 0., yFLTN, 56.82*sg, 0, "MANY");
}
- gMC->Gspos("FLOB", 4, "FAIB",-24., ytub+1.4, (zlenA*0.5 + fgkInterCentrModBorder2)*0.5, 0, "MANY");
- gMC->Gspos("FLOB", 3, "FAIB", 24., ytub+1.4, (zlenA*0.5 + fgkInterCentrModBorder2)*0.5, 0, "MANY");
- gMC->Gspos("FLOB", 2, "FAIB",-24., ytub+1.4, -(zlenA*0.5 + fgkInterCentrModBorder2)*0.5, 0, "MANY");
- gMC->Gspos("FLOB", 1, "FAIB", 24., ytub+1.4, -(zlenA*0.5 + fgkInterCentrModBorder2)*0.5, 0, "MANY");
+ ycoor = ytub + (tubepar[1] + 2.*bar2[1] + lonpar1[1]);
+ zcoor = (198.8 + 56.82)*0.5;
+ gMC->Gspos("FLO2", 2, "FAIB",-24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO2", 1, "FAIB",-24., ycoor, zcoor, 0, "MANY");
+ zcoor = (366.9 + 198.8)*0.5;
+ gMC->Gspos("FLO3", 2, "FAIB",-24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO3", 1, "FAIB",-24., ycoor, zcoor, 0, "MANY");
+ ycoor = ytub - (tubepar[1] + 2.*bar2[1] + lonpar1[1]);
+ zcoor = (198.8 + 56.82)*0.5;
+ gMC->Gspos("FLO2", 4, "FAIB", 24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO2", 3, "FAIB", 24., ycoor, zcoor, 0, "MANY");
+ zcoor = (366.9 + 198.8)*0.5;
+ gMC->Gspos("FLO3", 4, "FAIB", 24., ycoor,-zcoor, 0, "MANY");
+ gMC->Gspos("FLO3", 3, "FAIB", 24., ycoor, zcoor, 0, "MANY");
}
+ Float_t barS[3] = {fgkBarS[0], fgkBarS[1], fgkBarS[2]};
+ gMC->Gsvolu("FBAS", "BOX ", idtmed[504], barS, 3); // Al
+
+ Float_t barS1[3] = {fgkBarS1[0], fgkBarS1[1], fgkBarS1[2]};
+ gMC->Gsvolu("FBS1", "BOX ", idtmed[504], barS1, 3); // Al
+
+ Float_t barS2[3] = {fgkBarS2[0], fgkBarS2[1], fgkBarS2[2]};
+ gMC->Gsvolu("FBS2", "BOX ", idtmed[504], barS2, 3); // Al
+
+ Float_t ytubBis = carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - 2.*barS2[1] - tubepar[1];
+ ycoor = ytubBis;
+ zcoor =-carpar[2] + barS[2];
+ gMC->Gspos("FBAS", 1, "FCA1",-24., ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBAS", 2, "FCA1", 24., ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBAS", 1, "FCA2",-24., ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBAS", 2, "FCA2", 24., ycoor, zcoor, 0, "ONLY");
+
+ zcoor =-carpar[2] + 2.*barS[2] + 2.*tubepar[1] + barS1[2];
+ gMC->Gspos("FBS1", 1, "FCA1",-24., ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBS1", 2, "FCA1", 24., ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBS1", 1, "FCA2",-24., ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBS1", 2, "FCA2", 24., ycoor, zcoor, 0, "ONLY");
+
+ ycoor = ytubBis + (tubepar[1] + barS2[1]);
+ zcoor =-carpar[2] + 2.*barS[2] + barS2[2];
+ gMC->Gspos("FBS2", 1, "FCA1",-24., ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBS2", 2, "FCA1", 24., ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBS2", 1, "FCA2",-24., ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBS2", 2, "FCA2", 24., ycoor, zcoor, 0, "ONLY");
+
+ ycoor = ytubBis - (tubepar[1] + barS2[1]);
+ //zcoor =-carpar[2] + 2.*barS[2] + barS2[2];
+ gMC->Gspos("FBS2", 3, "FCA1",-24., ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBS2", 4, "FCA1", 24., ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBS2", 3, "FCA2",-24., ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FBS2", 4, "FCA2", 24., ycoor, zcoor, 0, "ONLY");
+
}
//_____________________________________________________________________________
void AliTOFv6T0::MakeSuperModuleServices(Float_t xtof, Float_t ytof, Float_t zlenA) const
{
//
- // Make signal cables (FCAB and FCBL/B volumes),
+ // Make signal cables (FCAB/L and FCBL/B volumes),
// supemodule cover (FCOV volume) and wall (FSAW volume)
- // in FAIA/B volume containers.
+ // in FAIA/B/C volume containers.
//
- //const Float_t fgkInterCentrModBorder2 = 57.5;
-
- // honeycomb layer between strips and cards (cm)
- //const Float_t fgkModuleCoverThickness = 2.;
-
Int_t *idtmed = fIdtmed->GetArray()-499;
Int_t idrotm[3];
- //const Float_t fgkCBLw = 13.5; // width of lateral cables and tubes block
- //const Float_t fgkSawThickness = 1.;
- //const Float_t fgkFEAwidth1 = 19.;
- //const Float_t fgkFEAwidth2 = 38.5;
-
Float_t tubepar[3] = {0., 0.4, xtof*0.5 - fgkCBLw - fgkSawThickness};
+ Float_t al1[3] = {fgkAl1parameters[0], fgkAl1parameters[1], fgkAl1parameters[2]};
+ Float_t al3[3] = {fgkAl3parameters[0], fgkAl3parameters[1], fgkAl3parameters[2]};
+ Float_t feaRoof1[3] = {fgkRoof1parameters[0], fgkRoof1parameters[1], fgkRoof1parameters[2]};
+ //Float_t feaRoof2[3] = {fgkRoof2parameters[0], fgkRoof2parameters[1], fgkRoof2parameters[2]};
+ Float_t feaParam[3] = {fgkFEAparameters[0], fgkFEAparameters[1], fgkFEAparameters[2]};
// FEA cables definition
- Float_t cbpar[3] = {0., 0.5, (tubepar[2] - fgkFEAwidth2*0.5)*0.5};
+ Float_t cbpar[3] = {0., 0.5, (tubepar[2] - (fgkFEAwidth2 - fgkFEAwidth1/6.)*0.5)*0.5};
gMC->Gsvolu("FCAB", "TUBE", idtmed[510], cbpar, 3); // copper+alu
- cbpar[2] = (xtof*0.5 - fgkCBLw - fgkSawThickness - (xtof*0.5 - 25. + fgkFEAwidth1*0.5))*0.5;
- gMC->Gsvolu("FCAL", "TUBE", idtmed[510], cbpar, 3); // copper+alu
+
+ Float_t cbparS[3] = {cbpar[0], cbpar[1], (tubepar[2] - (xtof*0.5 - 25. + (fgkFEAwidth1 - fgkFEAwidth1/6.)*0.5))*0.5};
+ gMC->Gsvolu("FCAL", "TUBE", idtmed[510], cbparS, 3); // copper+alu
// rotation matrix
AliMatrix(idrotm[0], 180., 90., 90., 90., 90., 0.);
- // FEA cables positioning
- Float_t rowstep = 6.66;
- Float_t ytub= 3.65;
- Float_t ycab= ytub-3.;
- Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4};
- Int_t rowb[5] = {6, 7, 6, 19, 7};
- Float_t carpos[3] = {25. - xtof*0.5,
- (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5,
- 0.};
- Int_t row = 1;
- Int_t nrow = 0;
- Float_t xCable = (xtof*0.5 - fgkCBLw - fgkSawThickness + fgkFEAwidth2*0.5)*0.5;
- Float_t xCableL = (xtof*0.5 - fgkCBLw - fgkSawThickness + (xtof*0.5 - 25. + fgkFEAwidth1*0.5))*0.5;
- for (Int_t sg= -1; sg< 2; sg+= 2) {
- carpos[2] = sg*zlenA*0.5;
- for (Int_t nb=0; nb<5; ++nb) {
- carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
- nrow = row + rowb[nb];
- for ( ; row < nrow ; ++row) {
+ Float_t carpar[3] = {xtof*0.5 - fgkCBLw - fgkSawThickness,
+ feaParam[1] + feaRoof1[1] + fgkRoof2parameters[1]*0.5,
+ feaRoof1[2] + fgkBetweenLandMask*0.5 + al3[2]};
- carpos[2] -= sg*rowstep;
+ Float_t bar2[3] = {fgkBar2[0], fgkBar2[1], fgkBar2[2]};
+ Float_t ytub =-(ytof*0.5 - fgkModuleCoverThickness)*0.5 + carpar[1] +
+ carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - 2.*bar2[1] - tubepar[1];
- if (nb==4)
- {
- gMC->Gspos("FCAB", 2*row, "FAIA", xCable, ycab, carpos[2]-1.1, idrotm[0], "ONLY");
- gMC->Gspos("FCAB", 2*row-1, "FAIA",-xCable, ycab, carpos[2]-1.1, idrotm[0], "ONLY");
- gMC->Gspos("FCAL", 2*row, "FAIA", xCableL, ycab-2.*cbpar[1], carpos[2]-1.1, idrotm[0], "ONLY");
- gMC->Gspos("FCAL", 2*row-1, "FAIA",-xCableL, ycab-2.*cbpar[1], carpos[2]-1.1, idrotm[0], "ONLY");
- }
- else
- {
- gMC->Gspos("FCAB", 2*row, "FAIA", xCable, ycab, carpos[2]-sg*1.1, idrotm[0], "ONLY");
- gMC->Gspos("FCAB", 2*row-1, "FAIA",-xCable, ycab, carpos[2]-sg*1.1, idrotm[0], "ONLY");
- gMC->Gspos("FCAL", 2*row, "FAIA", xCableL, ycab-2.*cbpar[1], carpos[2]-sg*1.1, idrotm[0], "ONLY");
- gMC->Gspos("FCAL", 2*row-1, "FAIA",-xCableL, ycab-2.*cbpar[1], carpos[2]-sg*1.1, idrotm[0], "ONLY");
- }
- }
- }
- }
-
- gMC->Gspos("FCAB", 182, "FAIA", xCable, ycab, -1.1, idrotm[0], "ONLY");
- gMC->Gspos("FCAB", 181, "FAIA",-xCable, ycab, -1.1, idrotm[0], "ONLY");
- gMC->Gspos("FCAL", 182, "FAIA", xCableL, ycab-2.*cbpar[1], -1.1, idrotm[0], "ONLY");
- gMC->Gspos("FCAL", 181, "FAIA",-xCableL, ycab-2.*cbpar[1], -1.1, idrotm[0], "ONLY");
+ // FEA cables positioning
+ Float_t xcoor = (tubepar[2] + (fgkFEAwidth2 - fgkFEAwidth1/6.)*0.5)*0.5;
+ Float_t ycoor = ytub - 3.;
+ Float_t zcoor =-carpar[2] + (2.*feaRoof1[2] - 2.*al1[2] - 2.*feaParam[2] - cbpar[1]);
+ gMC->Gspos("FCAB", 1, "FCA1",-xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ gMC->Gspos("FCAB", 2, "FCA1", xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ gMC->Gspos("FCAB", 1, "FCA2",-xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ gMC->Gspos("FCAB", 2, "FCA2", xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ xcoor = (tubepar[2] + (xtof*0.5 - 25. + (fgkFEAwidth1 - fgkFEAwidth1/6.)*0.5))*0.5;
+ ycoor -= 2.*cbpar[1];
+ gMC->Gspos("FCAL", 1, "FCA1",-xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ gMC->Gspos("FCAL", 2, "FCA1", xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ gMC->Gspos("FCAL", 1, "FCA2",-xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ gMC->Gspos("FCAL", 2, "FCA2", xcoor, ycoor, zcoor, idrotm[0], "ONLY");
- if (fTOFHoles) {
- row = 1;
- for (Int_t sg= -1; sg< 2; sg+= 2) {
- carpos[2] = sg*zlenA*0.5;
- for (Int_t nb=0; nb<4; ++nb) {
- carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
- nrow = row + rowb[nb];
- for ( ; row < nrow ; ++row) {
- carpos[2] -= sg*rowstep;
- gMC->Gspos("FCAB", 2*row, "FAIB", xCable, ycab, carpos[2]-sg*1.1, idrotm[0], "ONLY");
- gMC->Gspos("FCAB", 2*row-1, "FAIB",-xCable, ycab, carpos[2]-sg*1.1, idrotm[0], "ONLY");
- gMC->Gspos("FCAL", 2*row, "FAIB", xCableL, ycab-2.*cbpar[1], carpos[2]-sg*1.1, idrotm[0], "ONLY");
- gMC->Gspos("FCAL", 2*row-1, "FAIB",-xCableL, ycab-2.*cbpar[1], carpos[2]-sg*1.1, idrotm[0], "ONLY");
- }
- }
- }
- }
// Cables and tubes on the side blocks
// constants definition
AliMatrix(idrotm[2], 90., 90., 0., 0., 90., 0.);
// lateral cable and tube volume positioning
- Float_t xcoor, ycoor, zcoor;
xcoor = (xtof - fgkCBLw)*0.5 - 2.*sawpar[0];
ycoor = (fgkCBLh1 + fgkCBLh2)*0.25 - (ytof*0.5 - fgkModuleCoverThickness)*0.5;
zcoor = kCBLl*0.5;
gMC->Gspos("FCBL", 2, "FAIA", xcoor, ycoor, -zcoor, idrotm[1], "ONLY");
gMC->Gspos("FCBL", 3, "FAIA", -xcoor, ycoor, zcoor, idrotm[2], "ONLY");
gMC->Gspos("FCBL", 4, "FAIA", xcoor, ycoor, zcoor, idrotm[2], "ONLY");
+ gMC->Gspos("FCBL", 1, "FAIC", -xcoor, ycoor, -zcoor, idrotm[1], "ONLY");
+ gMC->Gspos("FCBL", 2, "FAIC", xcoor, ycoor, -zcoor, idrotm[1], "ONLY");
+ gMC->Gspos("FCBL", 3, "FAIC", -xcoor, ycoor, zcoor, idrotm[2], "ONLY");
+ gMC->Gspos("FCBL", 4, "FAIC", xcoor, ycoor, zcoor, idrotm[2], "ONLY");
if (fTOFHoles) {
cblpar[3] = kCBLlh *0.5;
}
// lateral cable and tube volume positioning
- xcoor = xtof*0.5-sawpar[0];
+ xcoor = xtof*0.5 - sawpar[0];
ycoor = (fgkCBLh2 - ytof*0.5 + fgkModuleCoverThickness)*0.5;
zcoor = 0.;
gMC->Gspos("FSAW", 1, "FAIA", -xcoor, ycoor, zcoor, 0, "ONLY");
gMC->Gspos("FSAW", 2, "FAIA", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FSAW", 1, "FAIC", -xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FSAW", 2, "FAIC", xcoor, ycoor, zcoor, 0, "ONLY");
if (fTOFHoles) {
xcoor = xtof*0.5 - sawpar[0];
}
xcoor = 0.;
- ycoor = 12.5*0.5 - covpar[1];
+ ycoor = (ytof*0.5 - fgkModuleCoverThickness)*0.5 - covpar[1];
zcoor = 0.;
gMC->Gspos("FCOV", 0, "FAIA", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FCOV", 0, "FAIC", xcoor, ycoor, zcoor, 0, "ONLY");
if (fTOFHoles) {
zcoor = (zlenA*0.5 + fgkInterCentrModBorder2)*0.5;
gMC->Gspos("FCOB", 1, "FAIB", xcoor, ycoor, zcoor, 0, "ONLY");
}
zcoor = (90. - 223.)*0.5;
- gMC->Gspos("FTOS", 1, "BBCE", ra, 0., zcoor, 0, "ONLY");
-
-}
-
-//_____________________________________________________________________________
-void AliTOFv6T0::DrawModule() const
-{
- //
- // Draw a shaded view of the Time Of Flight version 5
- //
-
- // Set everything unseen
- gMC->Gsatt("*", "seen", -1);
-
- //
- //Set volumes visible
- //
-
- //Set ALIC mother transparent
- gMC->Gsatt("ALIC","SEEN", 0);
-
-//=====> Level 1
- // Level 1 for TOF volumes
- gMC->Gsatt("B077","seen", 0);
-
-//=====> Level 2
- // Level 2 for TOF volumes
- gMC->Gsatt("B071","seen", 0);
- gMC->Gsatt("B074","seen", 0);
- gMC->Gsatt("B075","seen", 0);
- gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped -
- gMC->Gsatt("B080","seen", 0); // B080 does not has sub-level
-
- // Level 2 of B071
- gMC->Gsatt("B056","seen", 0); // B056 does not has sub-levels -
- gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped -
- gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped -
- gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped -
- gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped -
-
- char name[16];
- for (Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) {
- sprintf(name, "BREF%d",isec);
- gMC->Gsatt(name,"seen", 0); // all BREF%d sub-levels skipped -
- sprintf(name, "BTRD%d",isec);
- gMC->Gsatt(name,"seen", 0); // all BTRD%d sub-levels skipped -
- sprintf(name, "BTOF%d",isec);
- gMC->Gsatt(name,"seen",-2); // all BTOF%d sub-levels skipped -
- }
-
- gMC->Gdopt("hide", "on");
- gMC->Gdopt("shad", "on");
- gMC->Gsatt("*", "fill", 7);
- gMC->SetClipBox(".");
- gMC->SetClipBox("*", 100, 1000, 100, 1000, 100, 1000);
- gMC->DefaultRange();
- gMC->Gdraw("alic", 40, 30, 0, 10, 9.5, .018, .018);
- gMC->Gdhead(1111, "Time Of Flight");
- gMC->Gdman(18, 3, "MAN");
- gMC->Gdopt("hide","off");
-}
-//_____________________________________________________________________________
-void AliTOFv6T0::DrawDetectorModules() const
-{
- //
- // Draw a shaded view of the TOF detector SuperModules version 5
- //
-
- // Set everything unseen
- gMC->Gsatt("*", "seen", -1);
-
- //
- //Set volumes visible
- //
-
- //Set ALIC mother transparent
- gMC->Gsatt("ALIC","SEEN", 0);
-
-//=====> Level 1
- // Level 1 for TOF volumes
- gMC->Gsatt("B077","seen", 0);
-
-//=====> Level 2
- // Level 2 for TOF volumes
- gMC->Gsatt("B071","seen", 0);
- gMC->Gsatt("B074","seen", 0);
- gMC->Gsatt("B075","seen", 0);
- gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped -
- gMC->Gsatt("B080","seen", 0); // B080 does not has sub-level
-
- // Level 2 of B071
- gMC->Gsatt("B056","seen", 0); // B056 does not has sub-levels -
- gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped -
- gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped -
- gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped -
- gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped -
-
- char name[16];
- for (Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) {
- sprintf(name, "BREF%d",isec);
- gMC->Gsatt(name,"seen", 0); // all BREF%d sub-levels skipped -
- sprintf(name, "BTRD%d",isec);
- gMC->Gsatt(name,"seen", 0); // all BTRD%d sub-levels skipped -
- sprintf(name, "BTOF%d",isec);
- gMC->Gsatt(name,"seen", 0); // all BTOF%d sub-levels skipped -
- }
-
- // Level 3 of B071, B075 and B074
- gMC->Gsatt("FTOA","seen",-2); // all FTOA sub-levels skipped -
- if (fTOFHoles) gMC->Gsatt("FTOB","seen",-2); // all FTOB sub-levels skipped -
- if (fTOFHoles) gMC->Gsatt("FTOC","seen",-2); // all FTOC sub-levels skipped -
-
- // Level 3 of B071, B075 and B074
- gMC->Gsatt("FAIA","seen",-1); // all FAIA sub-levels skipped -
- if (fTOFHoles) gMC->Gsatt("FAIB","seen",-1); // all FAIB sub-levels skipped -
-
- // Level 3 of B071, B075 and B074
- gMC->Gsatt("FPEA","seen",-2/*1*/); // all FPEA sub-levels skipped -
- if (fTOFHoles) gMC->Gsatt("FPEB","seen",-2/*1*/); // all FPEB sub-levels skipped -
-
- gMC->Gdopt("hide","on");
- gMC->Gdopt("shad","on");
- gMC->Gsatt("*", "fill", 5);
- gMC->SetClipBox(".");
- gMC->SetClipBox("*", 100, 1000, 100, 1000, 0, 1000);
- gMC->DefaultRange();
- gMC->Gdraw("alic", 40, 30, 0, 10, 9.5, .018, .018);
- gMC->Gdhead(1111,"TOF detector");
- gMC->Gdman(18, 3, "MAN");
- gMC->Gdopt("hide","off");
-}
-
-//_____________________________________________________________________________
-void AliTOFv6T0::DrawDetectorStrips() const
-{
- //
- // Draw a shaded view of the TOF strips for version 5
- //
-
- // Set everything unseen
- gMC->Gsatt("*", "seen", -1);
-
- //
- //Set volumes visible
- //
-
- //Set ALIC mother transparent
- gMC->Gsatt("ALIC","SEEN", 0);
-
-//=====> Level 1
- // Level 1 for TOF volumes
- gMC->Gsatt("B077","seen", 0);
-
-//=====> Level 2
- // Level 2 for TOF volumes
- gMC->Gsatt("B071","seen", 0);
- gMC->Gsatt("B074","seen", 0);
- gMC->Gsatt("B075","seen", 0);
- gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped -
- gMC->Gsatt("B080","seen", 0); // B080 does not has sub-level
-
- // Level 2 of B071
- gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped -
- gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped -
- gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped -
- gMC->Gsatt("B056","seen", 0); // B056 does not has sub-levels -
- gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped -
-
- char name[16];
- for (Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) {
- sprintf(name, "BREF%d",isec);
- gMC->Gsatt(name,"seen", 0); // all BREF%d sub-levels skipped -
- sprintf(name, "BTRD%d",isec);
- gMC->Gsatt(name,"seen", 0); // all BTRD%d sub-levels skipped -
- sprintf(name, "BTOF%d",isec);
- gMC->Gsatt(name,"seen", 0); // all BTOF%d sub-levels skipped -
- }
-
- // Level 3 of B071, B074 and B075
- gMC->Gsatt("FTOA","SEEN", 0);
- if (fTOFHoles) gMC->Gsatt("FTOB","SEEN", 0);
- if (fTOFHoles) gMC->Gsatt("FTOC","SEEN", 0);
-
- // Level 4 of B071, B074 and B075
- gMC->Gsatt("FLTA","SEEN", 0);
- if (fTOFHoles) gMC->Gsatt("FLTB","SEEN", 0);
- if (fTOFHoles) gMC->Gsatt("FLTC","SEEN", 0);
-
- // Level 5 of B071, B074 and B075
- gMC->Gsatt("FAIA","SEEN", 0);
- if (fTOFHoles) gMC->Gsatt("FAIB","SEEN", 0);
-
- gMC->Gsatt("FPEA","SEEN", -2/*1*/);
- if (fTOFHoles) gMC->Gsatt("FPEB","SEEN", -2/*1*/);
-
- gMC->Gsatt("FSTR","SEEN",-2); // all FSTR sub-levels skipped -
-
- gMC->Gsatt("FWZ1","SEEN", 1);
- gMC->Gsatt("FWZ2","SEEN", 1);
- gMC->Gsatt("FWZ3","SEEN", 1);
- gMC->Gsatt("FWZ4","SEEN", 1);
- if (fTOFHoles) {
- gMC->Gsatt("FWZA","SEEN", 1);
- gMC->Gsatt("FWZB","SEEN", 1);
- gMC->Gsatt("FWZC","SEEN", 1);
- }
-
- // Level 2 of FAIA
- // Level 2 of FAIB
- gMC->Gsatt("FCA1","SEEN", 0);
- gMC->Gsatt("FCA2","SEEN", 0);
- gMC->Gsatt("FCAB","SEEN", 0);
- gMC->Gsatt("FCAL","SEEN", 0);
- gMC->Gsatt("FTUB","SEEN",-1); // all FTUB sub-levels skipped -
- gMC->Gsatt("FTLN","SEEN", 0);
- gMC->Gsatt("FLTN","SEEN", 0);
- gMC->Gsatt("FCBL","SEEN", 0);
- if (fTOFHoles) gMC->Gsatt("FCBB","SEEN", 0);
- gMC->Gsatt("FSAW","SEEN", 0);
- gMC->Gsatt("FCOV","SEEN", 0);
- if (fTOFHoles) {
- gMC->Gsatt("FCOB","SEEN", 0);
- gMC->Gsatt("FCOP","SEEN", 0);
- }
+ gMC->Gspos("FTOS", 1, "BBCE", ra, -3., zcoor, 0, "ONLY");
- // Level 2 of FTUB
- gMC->Gsatt("FITU","SEEN", 0);
-
- // Level 2 of FSTR
- gMC->Gsatt("FHON","SEEN", 1);
- gMC->Gsatt("FPC1","SEEN", 1);
- gMC->Gsatt("FPC2","SEEN", 1);
- gMC->Gsatt("FPCB","SEEN", 1);
- gMC->Gsatt("FRGL","SEEN", 1);
- gMC->Gsatt("FGLF","SEEN", 1);
-
- // Level 2 of FPCB => Level 3 of FSTR
- gMC->Gsatt("FSEN","SEEN", 0);
- gMC->Gsatt("FSEZ","SEEN", 0);
- gMC->Gsatt("FPAD","SEEN", 1);
-
- gMC->Gdopt("hide","on");
- gMC->Gdopt("shad","on");
- gMC->Gsatt("*", "fill", 5);
- gMC->SetClipBox(".");
- gMC->SetClipBox("*", 0, 1000, 0, 1000, 0, 1000);
- gMC->DefaultRange();
- gMC->Gdraw("alic", 40, 30, 0, 10, 9.5, .018, .018);
- gMC->Gdhead(1111,"TOF Strips");
- gMC->Gdman(18, 3, "MAN");
- gMC->Gdopt("hide","off");
}
//_____________________________________________________________________________
//AliTOF::CreateMaterials();
- AliMagF *magneticField = (AliMagF*)gAlice->Field();
+ AliMagF *magneticField = (AliMagF*)((AliMagF*)TGeoGlobalMagField::Instance()->GetField());
Int_t isxfld = magneticField->Integ();
Float_t sxmgmx = magneticField->Max();
wmatg10[2]= we[2]*0.4;
wmatg10[3]= we[3]*0.4;
wmatg10[4]= we[4]*0.4;
- AliDebug(1,Form("wg10 %d %d %d %d %d", wmatg10[0], wmatg10[1], wmatg10[2], wmatg10[3], wmatg10[4]));
+ AliDebug(1,Form("wg10 %f %f %f %f %f", wmatg10[0], wmatg10[1], wmatg10[2], wmatg10[3], wmatg10[4]));
//Float_t densg10 = 1.7; //old value
Float_t densg10 = 2.0; // (+17.8%)
AliMC *mcApplication = (AliMC*)gAlice->GetMCApp();
- //AddTrackReference(mcApplication->GetCurrentTrackNumber(), AliTrackReference::kTOF);
- AddTrackReference(mcApplication->GetCurrentTrackNumber());
+ AddTrackReference(mcApplication->GetCurrentTrackNumber(), AliTrackReference::kTOF);
+ //AddTrackReference(mcApplication->GetCurrentTrackNumber());
// getting information about hit volumes
}
}
//-------------------------------------------------------------------
-void AliTOFv6T0::MaterialMixer(Float_t* p,Float_t* a,Float_t* m,Int_t n) const
+void AliTOFv6T0::MaterialMixer(Float_t * p, const Float_t * const a,
+ const Float_t * const m, Int_t n) const
{
// a[] atomic weights vector (in)
// (atoms present in more compound appear separately)
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff