#include "AliTPCPreprocessor.h"
+#include "AliShuttleInterface.h"
#include "AliCDBMetaData.h"
#include "AliDCSValue.h"
#include "AliLog.h"
#include "AliTPCSensorTempArray.h"
+#include "AliTPCROC.h"
+#include "AliTPCCalROC.h"
+#include "AliTPCCalPad.h"
+#include "AliTPCCalibPedestal.h"
+#include "AliTPCCalibPulser.h"
+#include "AliTPCCalibCE.h"
+#include "AliTPCCalibRaw.h"
+#include "AliTPCdataQA.h"
+#include "ARVersion.h"
+#include "TFile.h"
+#include "TTree.h"
+#include "TGraph.h"
+#include "TEnv.h"
+#include "TParameter.h"
#include <TTimeStamp.h>
-const char kFname[]="$ALICE_ROOT/TPC";
-const char kAmandaStringTemp[] = "tpc_PT_%d.Temperature";
+const Int_t kValCutTemp = 100; // discard temperatures > 100 degrees
+const Int_t kDiffCutTemp = 5; // discard temperature differences > 5 degrees
+const Double_t kHighVoltageDifference = 1e-4; // don't record High Voltage points
+ // differing by less than 1e-4 from
+ // previous point.
+const TString kPedestalRunType = "PEDESTAL"; // pedestal run identifier
+const TString kPulserRunType = "PULSER"; // pulser run identifier
+const TString kPhysicsRunType = "PHYSICS"; // physics run identifier
+const TString kCosmicRunType = "COSMIC"; // cosmic run identifier
+const TString kLaserRunType = "LASER"; // laser run identifier
+const TString kDaqRunType = "DAQ"; // DAQ run identifier
+const TString kAmandaTemp = "TPC_PT_%d_TEMPERATURE"; // Amanda string for temperature entries
+const TString kAmandaDDL = "DDL%d"; // Amanda string for list of active DDLs
+const Int_t kNumDDL = 216; // number of TPC DDLs
+const Int_t kFirstDDL = 768; // identifier of first DDL
+//const Double_t kFitFraction = 0.7; // Fraction of DCS sensor fits required
+const Double_t kFitFraction = -1.0; // Don't require minimum number of fits in commissioning run
+const Int_t kNumPressureSensors = 3; // number of pressure sensors
+const char* kPressureSensorNames[kNumPressureSensors] = {
+ "CavernAtmosPressure",
+ "CavernAtmosPressure2",
+ "SurfaceAtmosPressure" };
+const Int_t kMinCESectors = 32; // minimum number of sectors (per side)
+ // to accept CE calibration
+
//
// This class is the SHUTTLE preprocessor for the TPC detector.
-// It contains several components, this far the part containing
-// temperatures is implemented
//
ClassImp(AliTPCPreprocessor)
//______________________________________________________________________________________________
-AliTPCPreprocessor::AliTPCPreprocessor(const char* detector, AliShuttleInterface* shuttle) :
- AliPreprocessor(detector, shuttle),
- fTemp(0)
+AliTPCPreprocessor::AliTPCPreprocessor(AliShuttleInterface* shuttle) :
+ AliPreprocessor("TPC",shuttle),
+ fConfEnv(0), fTemp(0), fHighVoltage(0), fHighVoltageStat(0), fGoofie(0),
+ fPressure(0), fConfigOK(kTRUE), fROC(0)
{
// constructor
+ fROC = AliTPCROC::Instance();
+
+ // define run types to be processed
+
+ AddRunType(kPedestalRunType);
+ AddRunType(kPulserRunType);
+ AddRunType(kPhysicsRunType);
+ AddRunType(kCosmicRunType);
+ AddRunType(kLaserRunType);
+ AddRunType(kDaqRunType);
+
}
//______________________________________________________________________________________________
-// AliTPCPreprocessor::AliTPCPreprocessor(const AliTPCPreprocessor& org) :
-// AliPreprocessor(org),
-// fTemp(0)
-// {
-// // copy constructor not implemented
-// // -- missing underlying copy constructor in AliPreprocessor
-//
-// Fatal("AliTPCPreprocessor", "copy constructor not implemented");
-//
-// // fTemp = new AliTPCSensorTempArray(*(org.fTemp));
-// }
+ AliTPCPreprocessor::AliTPCPreprocessor(const AliTPCPreprocessor& ) :
+ AliPreprocessor("TPC",0),
+ fConfEnv(0), fTemp(0), fHighVoltage(0), fHighVoltageStat(0), fGoofie(0),
+ fPressure(0), fConfigOK(kTRUE), fROC(0)
+ {
+
+ Fatal("AliTPCPreprocessor", "copy constructor not implemented");
+//
+// // fTemp = new AliTPCSensorTempArray(*(org.fTemp));
+ }
//______________________________________________________________________________________________
AliTPCPreprocessor::~AliTPCPreprocessor()
{
// destructor
-
+
delete fTemp;
+ delete fHighVoltage;
+ delete fHighVoltageStat;
+ delete fGoofie;
+ delete fPressure;
}
//______________________________________________________________________________________________
AliTPCPreprocessor& AliTPCPreprocessor::operator = (const AliTPCPreprocessor& )
void AliTPCPreprocessor::Initialize(Int_t run, UInt_t startTime,
UInt_t endTime)
{
- // Creates AliTestDataDCS object
AliPreprocessor::Initialize(run, startTime, endTime);
AliInfo(Form("\n\tRun %d \n\tStartTime %s \n\tEndTime %s", run,
- TTimeStamp(startTime).AsString(),
- TTimeStamp(endTime).AsString()));
+ TTimeStamp((time_t)startTime,0).AsString(),
+ TTimeStamp((time_t)endTime,0).AsString()));
+
+ // Preprocessor configuration
+
+ AliCDBEntry* entry = GetFromOCDB("Config", "Preprocessor");
+ if (entry) fConfEnv = (TEnv*) entry->GetObject();
+ if ( fConfEnv==0 ) {
+ Log("AliTPCPreprocsessor: Preprocessor Config OCDB entry missing.\n");
+ fConfigOK = kFALSE;
+ return;
+ }
- fTemp = new AliTPCSensorTempArray(fStartTime, fEndTime, kFname);
- fTemp->SetAmandaString(kAmandaStringTemp);
+ // Temperature sensors
+
+ TTree *confTree = 0;
+
+ TString tempConf = fConfEnv->GetValue("Temperature","ON");
+ tempConf.ToUpper();
+ if (tempConf != "OFF" ) {
+ entry = GetFromOCDB("Config", "Temperature");
+ if (entry) confTree = (TTree*) entry->GetObject();
+ if ( confTree==0 ) {
+ Log("AliTPCPreprocsessor: Temperature Config OCDB entry missing.\n");
+ fConfigOK = kFALSE;
+ return;
+ }
+ fTemp = new AliTPCSensorTempArray(startTime, endTime, confTree, kAmandaTemp);
+ fTemp->SetValCut(kValCutTemp);
+ fTemp->SetDiffCut(kDiffCutTemp);
+ }
+
+ // High voltage measurements
+
+ TString hvConf = fConfEnv->GetValue("HighVoltage","ON");
+ hvConf.ToUpper();
+ if (hvConf != "OFF" ) {
+ confTree=0;
+ entry=0;
+ entry = GetFromOCDB("Config", "HighVoltage");
+ if (entry) confTree = (TTree*) entry->GetObject();
+ if ( confTree==0 ) {
+ Log("AliTPCPreprocsessor: High Voltage Config OCDB entry missing.\n");
+ fConfigOK = kFALSE;
+ return;
+ }
+ time_t timeStart = (time_t)(((TString)GetRunParameter("DAQ_time_start")).Atoi());
+ time_t timeEnd = (time_t)(((TString)GetRunParameter("DAQ_time_end")).Atoi());
+ fHighVoltage = new AliDCSSensorArray (UInt_t(timeStart),
+ UInt_t(timeEnd), confTree);
+ }
+
+ // High voltage status values
+
+ TString hvStatConf = fConfEnv->GetValue("HighVoltageStat","ON");
+ hvStatConf.ToUpper();
+ if (hvStatConf != "OFF" ) {
+ confTree=0;
+ entry=0;
+ entry = GetFromOCDB("Config", "HighVoltageStat");
+ if (entry) confTree = (TTree*) entry->GetObject();
+ if ( confTree==0 ) {
+ Log("AliTPCPreprocsessor: High Voltage Status Config OCDB entry missing.\n");
+ fConfigOK = kFALSE;
+ return;
+ }
+ fHighVoltageStat = new AliDCSSensorArray(startTime, endTime, confTree);
+ }
+
+ // Goofie values
+
+ TString goofieConf = fConfEnv->GetValue("Goofie","ON");
+ goofieConf.ToUpper();
+ if (goofieConf != "OFF" ) {
+ confTree=0;
+ entry=0;
+ entry = GetFromOCDB("Config", "Goofie");
+ if (entry) confTree = (TTree*) entry->GetObject();
+ if ( confTree==0 ) {
+ Log("AliTPCPreprocsessor: Goofie Config OCDB entry missing.\n");
+ fConfigOK = kFALSE;
+ return;
+ }
+ fGoofie = new AliDCSSensorArray(startTime, endTime, confTree);
+ }
+
+ // Pressure values
+
+ TString runType = GetRunType();
+
+ if( runType == kPhysicsRunType ||
+ runType == kLaserRunType ) {
+ TString pressureConf = fConfEnv->GetValue("Pressure","ON");
+ pressureConf.ToUpper();
+ if (pressureConf != "OFF" ) {
+ TClonesArray * array = new TClonesArray("AliDCSSensor",kNumPressureSensors);
+ for(Int_t j = 0; j < kNumPressureSensors; j++) {
+ AliDCSSensor * sens = new ((*array)[j])AliDCSSensor;
+ sens->SetStringID(kPressureSensorNames[j]);
+ }
+ fPressure = new AliDCSSensorArray(startTime, endTime, array);
+ }
+ }
}
//______________________________________________________________________________________________
{
// Fills data into TPC calibrations objects
- if (!dcsAliasMap) return 0;
-
// Amanda servers provide information directly through dcsAliasMap
+
+ if (!fConfigOK) return 9;
+ UInt_t result = 0;
+ TObjArray *resultArray = new TObjArray();
+ TString errorHandling = fConfEnv->GetValue("ErrorHandling","ON");
+ errorHandling.ToUpper();
+ TObject * status;
+
+ UInt_t dcsResult=0;
+ if (!dcsAliasMap) {
+ dcsResult=1;
+ } else {
+ if (dcsAliasMap->GetEntries() == 0 ) dcsResult=1;
+ }
+ status = new TParameter<int>("dcsResult",dcsResult);
+ resultArray->Add(status);
+
+
+ TString runType = GetRunType();
+
+ if ( dcsResult == 0 ) {
+
// Temperature sensors are processed by AliTPCCalTemp
- UInt_t tempResult = MapTemperature(dcsAliasMap);
- UInt_t result=tempResult;
-
+ TString tempConf = fConfEnv->GetValue("Temperature","ON");
+ tempConf.ToUpper();
+ if (tempConf != "OFF" ) {
+ UInt_t tempResult = MapTemperature(dcsAliasMap);
+ if ( tempConf != "TRY") result+=tempResult;
+ status = new TParameter<int>("tempResult",tempResult);
+ resultArray->Add(status);
+ }
+
+ // High Voltage recordings
+
+
+ TString hvConf = fConfEnv->GetValue("HighVoltage","ON");
+ hvConf.ToUpper();
+ if (hvConf != "OFF" ) {
+ UInt_t hvResult = MapHighVoltage(dcsAliasMap);
+ if (hvConf != "TRY") result+=hvResult;
+ status = new TParameter<int>("hvResult",hvResult);
+ resultArray->Add(status);
+ }
+
+ // Goofie values
+
+
+ TString goofieConf = fConfEnv->GetValue("Goofie","ON");
+ goofieConf.ToUpper();
+ if (goofieConf != "OFF" ) {
+ UInt_t goofieResult = MapGoofie(dcsAliasMap);
+ if (goofieConf != "TRY") result+=goofieResult;
+ status = new TParameter<int>("goofieResult",goofieResult);
+ resultArray->Add(status);
+ }
+
+ // Pressure values
+
+ if( runType == kPhysicsRunType ||
+ runType == kLaserRunType ) {
+
+ TString pressureConf = fConfEnv->GetValue("Pressure","ON");
+ pressureConf.ToUpper();
+ if (pressureConf != "OFF" ) {
+ UInt_t pressureResult = MapPressure(dcsAliasMap);
+ status = new TParameter<int>("pressureResult",pressureResult);
+ resultArray->Add(status);
+ }
+ }
+ }
// Other calibration information will be retrieved through FXS files
- // examples:
+ // examples:
// TList* fileSourcesDAQ = GetFile(AliShuttleInterface::kDAQ, "pedestals");
// const char* fileNamePed = GetFile(AliShuttleInterface::kDAQ, "pedestals", "LDC1");
//
// TList* fileSourcesHLT = GetFile(AliShuttleInterface::kHLT, "calib");
// const char* fileNameHLT = GetFile(AliShuttleInterface::kHLT, "calib", "LDC1");
+ // pedestal entries
+ if(runType == kPedestalRunType) {
+ Int_t numSources = 1;
+ Int_t pedestalSource[2] = {AliShuttleInterface::kDAQ,AliShuttleInterface::kHLT} ;
+ TString source = fConfEnv->GetValue("Pedestal","DAQ");
+ source.ToUpper();
+ if (source != "OFF" ) {
+ if ( source == "HLT") pedestalSource[0] = AliShuttleInterface::kHLT;
+ if (!GetHLTStatus()) pedestalSource[0] = AliShuttleInterface::kDAQ;
+ if (source == "HLTDAQ" ) {
+ numSources=2;
+ pedestalSource[0] = AliShuttleInterface::kHLT;
+ pedestalSource[1] = AliShuttleInterface::kDAQ;
+ }
+ if (source == "DAQHLT" ) numSources=2;
+ UInt_t pedestalResult=0;
+ for (Int_t i=0; i<numSources; i++ ) {
+ pedestalResult = ExtractPedestals(pedestalSource[i]);
+ if ( pedestalResult == 0 ) break;
+ }
+ result += pedestalResult;
+ status = new TParameter<int>("pedestalResult",pedestalResult);
+ resultArray->Add(status);
+ }
+ }
+
+ // pulser trigger processing
+
+ if(runType == kPulserRunType) {
+ Int_t numSources = 1;
+ Int_t pulserSource[2] = {AliShuttleInterface::kDAQ,AliShuttleInterface::kHLT} ;
+ TString source = fConfEnv->GetValue("Pulser","DAQ");
+ source.ToUpper();
+ if ( source != "OFF") {
+ if ( source == "HLT") pulserSource[0] = AliShuttleInterface::kHLT;
+ if (!GetHLTStatus()) pulserSource[0] = AliShuttleInterface::kDAQ;
+ if (source == "HLTDAQ" ) {
+ numSources=2;
+ pulserSource[0] = AliShuttleInterface::kHLT;
+ pulserSource[1] = AliShuttleInterface::kDAQ;
+ }
+ if (source == "DAQHLT" ) numSources=2;
+ if (source == "TRY" ) numSources=2;
+ UInt_t pulserResult=0;
+ for (Int_t i=0; i<numSources; i++ ) {
+ pulserResult = ExtractPulser(pulserSource[i]);
+ if ( pulserResult == 0 ) break;
+ }
+ if (source != "TRY") result += pulserResult;
+ status = new TParameter<int>("pulserResult",pulserResult);
+ resultArray->Add(status);
+ }
+ }
+
+
+// raw calibration processing
+
+ if(runType == kPhysicsRunType) {
+ Int_t numSources = 1;
+ Int_t rawSource[2] = {AliShuttleInterface::kDAQ,AliShuttleInterface::kHLT} ;
+ TString source = fConfEnv->GetValue("Raw","DAQ");
+ source.ToUpper();
+ if ( source != "OFF") {
+ if ( source == "HLT") rawSource[0] = AliShuttleInterface::kHLT;
+ if (!GetHLTStatus()) rawSource[0] = AliShuttleInterface::kDAQ;
+ if (source == "HLTDAQ" ) {
+ numSources=2;
+ rawSource[0] = AliShuttleInterface::kHLT;
+ rawSource[1] = AliShuttleInterface::kDAQ;
+ }
+ if (source == "DAQHLT" ) numSources=2;
+ if (source == "TRY" ) numSources=2;
+ UInt_t rawResult=0;
+ for (Int_t i=0; i<numSources; i++ ) {
+ rawResult = ExtractRaw(rawSource[i]);
+ if ( rawResult == 0 ) break;
+ }
+ if (source != "TRY" )result += rawResult;
+ status = new TParameter<int>("rawResult",rawResult);
+ resultArray->Add(status);
+ }
+ }
+
+
+ // Altro configuration
+
+
+ TString altroConf = fConfEnv->GetValue("AltroConf","ON");
+ altroConf.ToUpper();
+ if (altroConf != "OFF" ) {
+ UInt_t altroResult = ExtractAltro(AliShuttleInterface::kDCS,dcsAliasMap);
+ if (altroConf != "TRY" ) result+=altroResult;
+ status = new TParameter<int>("altroResult",altroResult);
+ resultArray->Add(status);
+ }
+
+
+ // Central Electrode processing
+
+ if( runType == kPhysicsRunType ||
+ runType == kLaserRunType ) {
+
+ Int_t numSources = 1;
+ Int_t ceSource[2] = {AliShuttleInterface::kDAQ,AliShuttleInterface::kHLT} ;
+ TString source = fConfEnv->GetValue("CE","DAQ");
+ source.ToUpper();
+ if ( source != "OFF" ) {
+ if ( source == "HLT") ceSource[0] = AliShuttleInterface::kHLT;
+ if (!GetHLTStatus()) ceSource[0] = AliShuttleInterface::kDAQ;
+ if (source == "HLTDAQ" ) {
+ numSources=2;
+ ceSource[0] = AliShuttleInterface::kHLT;
+ ceSource[1] = AliShuttleInterface::kDAQ;
+ }
+ if (source == "DAQHLT" ) numSources=2;
+ if (source == "TRY" ) numSources=2;
+ UInt_t ceResult=0;
+ for (Int_t i=0; i<numSources; i++ ) {
+ ceResult = ExtractCE(ceSource[i]);
+ if ( ceResult == 0 ) break;
+ }
+
+ // only flag error if CE result is missing from LASER runs
+ // -- for PHYSICS run do CE processing if data available
+
+ if ( runType == kLaserRunType && source != "TRY" && ceResult<10 ) result += ceResult;
+ status = new TParameter<int>("ceResult",ceResult);
+ resultArray->Add(status);
+
+ numSources = 1;
+ Int_t qaSource[2] = {AliShuttleInterface::kDAQ,AliShuttleInterface::kHLT} ;
+ source = fConfEnv->GetValue("QA","DAQ");
+ source.ToUpper();
+ if ( source != "OFF" ) {
+ if ( source == "HLT") qaSource[0] = AliShuttleInterface::kHLT;
+ if (!GetHLTStatus()) qaSource[0] = AliShuttleInterface::kDAQ;
+ if (source == "HLTDAQ" ) {
+ numSources=2;
+ qaSource[0] = AliShuttleInterface::kHLT;
+ qaSource[1] = AliShuttleInterface::kDAQ;
+ }
+ if (source == "DAQHLT" ) numSources=2;
+ if (source == "TRY" ) numSources=2;
+ UInt_t qaResult=0;
+ for (Int_t i=0; i<numSources; i++ ) {
+ qaResult = ExtractQA(qaSource[i]);
+ if ( qaResult == 0 ) break;
+ }
+// result += qaResult;
+ if ( qaResult !=0 ) Log ("ExtractQA failed, no QA entry available.");
+ status = new TParameter<int>("qaResult",qaResult);
+ resultArray->Add(status);
+ }
+ }
+ }
+
+// Store component status to OCDB
+
+ AliCDBMetaData metaData;
+ metaData.SetBeamPeriod(0);
+ metaData.SetResponsible("Haavard Helstrup");
+ metaData.SetAliRootVersion(ALIROOT_SVN_BRANCH);
+ metaData.SetComment("Preprocessor AliTPC status.");
+ Bool_t storeOK = Store("Calib", "PreprocStatus", resultArray, &metaData, 0, kFALSE);
+ if (!storeOK) Log ("Unable to store preprocessor status entry");
+
+ resultArray->Delete();
+ delete resultArray;
+
+ if (errorHandling == "OFF" ) return 0;
return result;
+
}
//______________________________________________________________________________________________
UInt_t AliTPCPreprocessor::MapTemperature(TMap* dcsAliasMap)
TMap *map = fTemp->ExtractDCS(dcsAliasMap);
if (map) {
fTemp->MakeSplineFit(map);
- AliInfo(Form("Temperature values extracted, fits performed.\n"));
+ Double_t fitFraction = 1.0*fTemp->NumFits()/fTemp->NumSensors();
+ if (fitFraction > kFitFraction ) {
+ AliInfo(Form("Temperature values extracted, fits performed.\n"));
+ } else {
+ Log ("Too few temperature maps fitted. \n");
+ result = 9;
+ }
} else {
- AliError(Form("No temperature map extracted.\n"));
- Log("AliTPCPreprocsessor: no temperature map extracted. \n");
+ Log("No temperature map extracted. \n");
result=9;
}
delete map;
// Now store the final CDB file
-
- if ( result == 0 ) {
+
+ if ( result == 0 ) {
AliCDBMetaData metaData;
metaData.SetBeamPeriod(0);
metaData.SetResponsible("Haavard Helstrup");
+ metaData.SetAliRootVersion(ALIROOT_SVN_BRANCH);
metaData.SetComment("Preprocessor AliTPC data base entries.");
- result = Store("Calib", "Temperature", fTemp, &metaData, 0, 0);
- if ( result == 1 ) {
- result = 0;
- } else {
- result = 1;
- } // revert to new return code conventions
+ Bool_t storeOK = Store("Calib", "Temperature", fTemp, &metaData, 0, kFALSE);
+ if ( !storeOK ) result=1;
+
+ }
+
+ return result;
+
+}
+//______________________________________________________________________________________________
+UInt_t AliTPCPreprocessor::MapPressure(TMap* dcsAliasMap)
+{
+
+ // extract DCS pressure maps. Perform fits to save space
+
+ UInt_t result=0;
+ TMap *map = fPressure->ExtractDCS(dcsAliasMap);
+ if (map) {
+ fPressure->MakeSplineFit(map);
+ Double_t fitFraction = 1.0*fPressure->NumFits()/fPressure->NumSensors();
+ if (fitFraction > kFitFraction ) {
+ AliInfo(Form("Pressure values extracted, fits performed.\n"));
+ } else {
+ Log ("Too few pressure maps fitted. \n");
+ result = 9;
+ }
+ } else {
+ Log("No pressure map extracted. \n");
+ result=9;
+ }
+ delete map;
+ return result;
+}
+
+//______________________________________________________________________________________________
+UInt_t AliTPCPreprocessor::MapHighVoltage(TMap* dcsAliasMap)
+{
+
+ // extract DCS HV maps. Perform fits to save space
+
+ UInt_t result=0;
+ TMap *map = fHighVoltage->ExtractDCS(dcsAliasMap);
+ if (map) {
+ fHighVoltage->ClearFit();
+ fHighVoltage->RemoveGraphDuplicates(kHighVoltageDifference);
+ // don't keep new point if too similar to previous one
+ fHighVoltage->SetGraph(map);
+ } else {
+ Log("No high voltage recordings extracted. \n");
+ result=9;
+ }
+ delete map;
+
+ TString hvStatConf = fConfEnv->GetValue("HighVoltageStat","ON");
+ hvStatConf.ToUpper();
+ if (hvStatConf != "OFF" ) {
+ TMap *map2 = fHighVoltageStat->ExtractDCS(dcsAliasMap);
+ if (map2) {
+ fHighVoltageStat->ClearFit();
+ fHighVoltageStat->SetGraph(map2);
+ } else {
+ Log("No high voltage status recordings extracted. \n");
+ result=9;
+ }
+ delete map2;
+
+ // add status maps to high voltage sensor array
+
+ fHighVoltage->AddSensors(fHighVoltageStat);
+ }
+ // Now store the final CDB file
+
+ if ( result == 0 ) {
+ AliCDBMetaData metaData;
+ metaData.SetBeamPeriod(0);
+ metaData.SetResponsible("Haavard Helstrup");
+ metaData.SetAliRootVersion(ALIROOT_SVN_BRANCH);
+ metaData.SetComment("Preprocessor AliTPC data base entries.");
+
+ Bool_t storeOK = Store("Calib", "HighVoltage", fHighVoltage, &metaData, 0, kFALSE);
+ if ( !storeOK ) result=1;
+
}
return result;
+
+}
+
+//______________________________________________________________________________________________
+UInt_t AliTPCPreprocessor::MapGoofie(TMap* dcsAliasMap)
+{
+
+ // extract DCS Goofie maps. Do not perform fits (low update rate)
+
+ UInt_t result=0;
+
+ TMap *map = fGoofie->ExtractDCS(dcsAliasMap);
+ if (map) {
+ fGoofie->ClearFit();
+ fGoofie->SetGraph(map);
+ } else {
+ Log("No Goofie recordings extracted. \n");
+ result=9;
+ }
+ delete map;
+
+ // Now store the final CDB file
+
+ if ( result == 0 ) {
+ AliCDBMetaData metaData;
+ metaData.SetBeamPeriod(0);
+ metaData.SetResponsible("Haavard Helstrup");
+ metaData.SetAliRootVersion(ALIROOT_SVN_BRANCH);
+ metaData.SetComment("Preprocessor AliTPC data base entries.");
+
+ Bool_t storeOK = Store("Calib", "Goofie", fGoofie, &metaData, 0, kFALSE);
+ if ( !storeOK ) result=1;
+
+ }
+
+ return result;
+
+}
+
+
+//______________________________________________________________________________________________
+
+UInt_t AliTPCPreprocessor::ExtractPedestals(Int_t sourceFXS)
+{
+ //
+ // Read pedestal file from file exchage server
+ // Keep original entry from OCDB in case no new pedestals are available
+ //
+ AliTPCCalPad *calPadPedOCDB=0;
+ AliCDBEntry* entry = GetFromOCDB("Calib", "Pedestals");
+ if (entry) calPadPedOCDB = (AliTPCCalPad*)entry->GetObject();
+ if ( calPadPedOCDB==NULL ) {
+ Log("AliTPCPreprocsessor: No previous TPC pedestal entry available.\n");
+ }
+
+ AliTPCCalPad *calPadRMSOCDB=0;
+ entry = GetFromOCDB("Calib", "PadNoise");
+ if (entry) calPadRMSOCDB = (AliTPCCalPad*)entry->GetObject();
+ if ( calPadRMSOCDB==NULL ) {
+ Log("AliTPCPreprocsessor: No previous TPC noise entry available.\n");
+ }
+
+ AliTPCCalPad* calPadPed = new AliTPCCalPad("PedestalsMean","PedestalsMean");
+ AliTPCCalPad* calPadRMS = new AliTPCCalPad("PedestalsRMS","PedestalsRMS");
+
+
+ UInt_t result=0;
+
+ Int_t nSectors = fROC->GetNSectors();
+ TVectorD foundSectorsPed(nSectors);
+ foundSectorsPed=0;
+ TVectorD foundSectorsRMS(nSectors);
+ foundSectorsRMS=0;
+
+ TList* list = GetFileSources(sourceFXS,"pedestals");
+
+ if (list && list->GetEntries()>0) {
+
+// loop through all files from LDCs
+
+ Bool_t changed=false;
+ UInt_t index = 0;
+ while (list->At(index)!=NULL) {
+ TObjString* fileNameEntry = (TObjString*) list->At(index);
+ if (fileNameEntry!=NULL) {
+ TString fileName = GetFile(sourceFXS, "pedestals",
+ fileNameEntry->GetString().Data());
+ TFile *f = TFile::Open(fileName);
+ if (!f) {
+ Log ("Error opening pedestal file.");
+ result =2;
+ break;
+ }
+ AliTPCCalibPedestal *calPed;
+ f->GetObject("tpcCalibPedestal",calPed);
+ if ( !calPed ) {
+ Log ("No pedestal calibration object in file.");
+ result = 2;
+ break;
+ }
+
+ // replace entries for the sectors available in the present file
+
+ changed=true;
+ for (Int_t sector=0; sector<nSectors; sector++) {
+ AliTPCCalROC *rocPed=calPed->GetCalRocPedestal(sector, kFALSE);
+ if ( rocPed ) {
+ AliTPCCalROC* roc=calPadPed->GetCalROC(sector);
+ roc->Add(rocPed,1);
+ foundSectorsPed[sector]++;
+ }
+ AliTPCCalROC *rocRMS=calPed->GetCalRocRMS(sector, kFALSE);
+ if ( rocRMS ) {
+ AliTPCCalROC* roc=calPadRMS->GetCalROC(sector);
+ roc->Add(rocRMS,1);
+ foundSectorsRMS[sector]++;
+ }
+ }
+ delete calPed;
+ f->Close();
+ }
+ ++index;
+ } // while(list)
+
+//
+// Check if calibration is complete -- otherwise take from old OCDB entry
+
+// inner sectors
+ for (Int_t sector=0; sector<nSectors/2; sector++) {
+ if (foundSectorsPed[sector] < 1 ) {
+ if (calPadPedOCDB) {
+ AliTPCCalROC *rocOCDB=calPadPedOCDB->GetCalROC(sector);
+ calPadPed->SetCalROC(rocOCDB,sector);
+ } else {
+ const int mess_length=100;
+ char message[mess_length];
+ snprintf(message,mess_length,"Missing pedestals for sector %d - also not available from previous OCDB entry.\n",
+ sector);
+ Log (message);
+ result = 2;
+ }
+ }
+ if (foundSectorsRMS[sector] < 1 ) {
+ if (calPadRMSOCDB) {
+ AliTPCCalROC *rocOCDB=calPadRMSOCDB->GetCalROC(sector);
+ calPadRMS->SetCalROC(rocOCDB,sector);
+ } else {
+ const int mess_length=100;
+ char message[mess_length];
+ snprintf(message,mess_length,"Missing pedestal RMS for sector %d - also not available from previous OCDB entry.\n",
+ sector);
+ Log (message);
+ result = 2;
+ }
+ }
+ }
+
+// outer sectors -- two updates needed
+
+ for (Int_t sector=nSectors/2; sector<nSectors; sector++) {
+ if (foundSectorsPed[sector] < 2 ) {
+ if (calPadPedOCDB) {
+ AliTPCCalROC *rocOCDB=calPadPedOCDB->GetCalROC(sector);
+ calPadPed->SetCalROC(rocOCDB,sector);
+ } else {
+ const int mess_length=100;
+ char message[mess_length];
+ snprintf(message,mess_length,"Missing pedestals for sector %d - also not available from previous OCDB entry.\n",
+ sector);
+ Log (message);
+ result = 2;
+ }
+
+ }
+ if (foundSectorsRMS[sector] < 2 ) {
+ if (calPadRMSOCDB) {
+ AliTPCCalROC *rocOCDB=calPadRMSOCDB->GetCalROC(sector);
+ calPadRMS->SetCalROC(rocOCDB,sector);
+ } else {
+ const int mess_length=100;
+ char message[mess_length];
+ snprintf(message,mess_length,"Missing pedestal RMS for sector %d - also not available from previous OCDB entry.\n",
+ sector);
+ Log (message);
+ result = 2;
+ }
+
+ }
+ }
+
+
+//
+// Store updated pedestal entry to OCDB
+//
+ if (changed) {
+ AliCDBMetaData metaData;
+ metaData.SetBeamPeriod(0);
+ metaData.SetResponsible("Haavard Helstrup");
+ metaData.SetAliRootVersion(ALIROOT_SVN_BRANCH);
+ metaData.SetComment("Preprocessor AliTPC data base entries.");
+
+ Bool_t storeOK = Store("Calib", "Pedestals", calPadPed, &metaData, 0, kTRUE);
+ if ( !storeOK ) ++result;
+ storeOK = Store("Calib", "PadNoise", calPadRMS, &metaData, 0, kTRUE);
+ if ( !storeOK ) ++result;
+ }
+ } else {
+ Log ("Error: no entries in pedestal file list!");
+ result = 1;
+ }
+
+ delete calPadPed;
+ delete calPadRMS;
+ delete calPadPedOCDB;
+ delete calPadRMSOCDB;
+
+ return result;
+}
+
+//______________________________________________________________________________________________
+
+
+UInt_t AliTPCPreprocessor::ExtractPulser(Int_t sourceFXS)
+{
+ //
+ // Read pulser calibration file from file exchage server
+ // Keep original entry from OCDB in case no new pulser calibration is available
+ //
+
+ TObjArray *pulserObjects = new TObjArray;
+ TObjArray *pulserObjectsOCDB=0;
+
+ AliCDBEntry* entry = GetFromOCDB("Calib", "Pulser");
+ if (entry) pulserObjectsOCDB = (TObjArray*)entry->GetObject();
+ if ( pulserObjectsOCDB==NULL ) {
+ Log("AliTPCPreprocsessor: No previous TPC pulser entry available.\n");
+ }
+
+ AliTPCCalPad *pulserTmean = new AliTPCCalPad("PulserTmean","PulserTmean");
+ pulserObjects->Add(pulserTmean);
+
+ AliTPCCalPad *pulserTrms = new AliTPCCalPad("PulserTrms","PulserTrms");
+ pulserObjects->Add(pulserTrms);
+
+ AliTPCCalPad *pulserQmean = new AliTPCCalPad("PulserQmean","PulserQmean");
+ pulserObjects->Add(pulserQmean);
+
+
+
+ UInt_t result=0;
+
+ Int_t nSectors = fROC->GetNSectors();
+ TVectorD foundTmean(nSectors);
+ foundTmean=0;
+ TVectorD foundTrms(nSectors);
+ foundTrms=0;
+ TVectorD foundQmean(nSectors);
+ foundQmean=0;
+
+
+ TList* list = GetFileSources(sourceFXS,"pulser");
+
+ if (list && list->GetEntries()>0) {
+
+// loop through all files from LDCs
+
+ Bool_t changed=false;
+ UInt_t index = 0;
+ while (list->At(index)!=NULL) {
+ TObjString* fileNameEntry = (TObjString*) list->At(index);
+ if (fileNameEntry!=NULL) {
+ TString fileName = GetFile(sourceFXS, "pulser",
+ fileNameEntry->GetString().Data());
+ TFile *f = TFile::Open(fileName);
+ if (!f) {
+ Log ("Error opening pulser file.");
+ result =2;
+ break;
+ }
+ AliTPCCalibPulser *calPulser;
+ f->GetObject("tpcCalibPulser",calPulser);
+ if ( !calPulser ) {
+ Log ("No pulser calibration object in file.");
+ result = 2;
+ break;
+ }
+
+ // replace entries for the sectors available in the present file
+
+ changed=true;
+ for (Int_t sector=0; sector<nSectors; sector++) {
+ AliTPCCalROC *rocTmean=calPulser->GetCalRocT0(sector);
+ if ( rocTmean ) {
+ AliTPCCalROC* roc=pulserTmean->GetCalROC(sector);
+ roc->Add(rocTmean,1);
+ foundTmean[sector]++;
+ }
+ AliTPCCalROC *rocTrms=calPulser->GetCalRocRMS(sector);
+ if ( rocTrms ) {
+ AliTPCCalROC* roc=pulserTrms->GetCalROC(sector);
+ roc->Add(rocTrms,1);
+ foundTrms[sector]++;
+ }
+ AliTPCCalROC *rocQmean=calPulser->GetCalRocQ(sector);
+ if ( rocQmean ) {
+ AliTPCCalROC* roc=pulserQmean->GetCalROC(sector);
+ roc->Add(rocQmean,1);
+ foundQmean[sector]++;
+ }
+ }
+ delete calPulser;
+ f->Close();
+ }
+ ++index;
+ } // while(list)
+
+
+
+
+if (pulserObjectsOCDB) {
+ AliTPCCalPad* pulserTmeanOCDB = (AliTPCCalPad*)pulserObjectsOCDB->FindObject("PulserTmean");
+ AliTPCCalPad* pulserTrmsOCDB = (AliTPCCalPad*)pulserObjectsOCDB->FindObject("PulserTrms");
+ AliTPCCalPad* pulserQmeanOCDB = (AliTPCCalPad*)pulserObjectsOCDB->FindObject("PulserQmean");
+
+//
+// Check if calibration is complete -- otherwise take from old OCDB entry
+
+// inner sectors
+ for (Int_t sector=0; sector<nSectors/2; sector++) {
+ if (foundTmean[sector] < 1 ) {
+ if (pulserTmeanOCDB) {
+ AliTPCCalROC* rocOCDB = pulserTmeanOCDB->GetCalROC(sector);
+ if ( rocOCDB ) pulserTmean->SetCalROC(rocOCDB,sector);
+ }
+ }
+ if (foundTrms[sector] < 1 ) {
+ if (pulserTrmsOCDB) {
+ AliTPCCalROC* rocOCDB = pulserTrmsOCDB->GetCalROC(sector);
+ if ( rocOCDB ) pulserTrms->SetCalROC(rocOCDB,sector);
+ }
+ }
+ if (foundQmean[sector] < 1 ) {
+ if (pulserQmeanOCDB) {
+ AliTPCCalROC* rocOCDB = pulserQmeanOCDB->GetCalROC(sector);
+ if ( rocOCDB ) pulserQmean->SetCalROC(rocOCDB,sector);
+ }
+ }
+ }
+
+// outer sectors -- two updates needed
+
+ for (Int_t sector=0; sector<nSectors/2; sector++) {
+ if (foundTmean[sector] < 2 ) {
+ if (pulserTmeanOCDB) {
+ AliTPCCalROC* rocOCDB = pulserTmeanOCDB->GetCalROC(sector);
+ if ( rocOCDB ) pulserTmean->SetCalROC(rocOCDB,sector);
+ }
+ }
+ if (foundTrms[sector] < 2 ) {
+ if (pulserTrmsOCDB) {
+ AliTPCCalROC* rocOCDB = pulserTrmsOCDB->GetCalROC(sector);
+ if ( rocOCDB ) pulserTrms->SetCalROC(rocOCDB,sector);
+ }
+ }
+ if (foundQmean[sector] < 2 ) {
+ if (pulserQmeanOCDB) {
+ AliTPCCalROC* rocOCDB = pulserQmeanOCDB->GetCalROC(sector);
+ if ( rocOCDB ) pulserQmean->SetCalROC(rocOCDB,sector);
+ }
+ }
+
+ }
+}
+
+//
+// Store updated pedestal entry to OCDB
+//
+ if (changed) {
+ AliCDBMetaData metaData;
+ metaData.SetBeamPeriod(0);
+ metaData.SetResponsible("Haavard Helstrup");
+ metaData.SetAliRootVersion(ALIROOT_SVN_BRANCH);
+ metaData.SetComment("Preprocessor AliTPC data base entries.");
+
+ Bool_t storeOK = Store("Calib", "Pulser", pulserObjects, &metaData, 0, kTRUE);
+ if ( !storeOK ) ++result;
+ }
+ } else {
+ Log ("Error: no entries in pulser file list!");
+ result = 1;
+ }
+ pulserObjects->Delete();
+ delete pulserObjects;
+ if (pulserObjectsOCDB) pulserObjectsOCDB->Delete();
+ delete pulserObjectsOCDB;
+
+ return result;
+}
+
+//______________________________________________________________________________________________
+
+
+UInt_t AliTPCPreprocessor::ExtractRaw(Int_t sourceFXS)
+{
+ //
+ // Read Raw calibration file from file exchage server
+ //
+
+ UInt_t result=0;
+ TObjArray* rawArray = new TObjArray;
+
+ TList* list = GetFileSources(sourceFXS,"tpcCalibRaw");
+
+ if (list && list->GetEntries()>0) {
+
+// loop through all files
+
+ UInt_t index = 0;
+ while (list->At(index)!=NULL) {
+ TObjString* fileNameEntry = (TObjString*) list->At(index);
+ if (fileNameEntry!=NULL) {
+ TString fileName = GetFile(sourceFXS, "tpcCalibRaw",
+ fileNameEntry->GetString().Data());
+ TFile *f = TFile::Open(fileName);
+ if (!f) {
+ Log ("Error opening raw file.");
+ result =2;
+ break;
+ }
+ AliTPCCalibRaw *calRaw;
+ f->GetObject("tpcCalibRaw",calRaw);
+ if ( !calRaw ) {
+ Log ("No raw calibration object in file.");
+ result = 2;
+ break;
+ }
+ rawArray->Add(calRaw);
+ f->Close();
+ }
+ ++index;
+ } // while(list)
+//
+// Store updated pedestal entry to OCDB
+//
+ AliCDBMetaData metaData;
+ metaData.SetBeamPeriod(0);
+ metaData.SetResponsible("Haavard Helstrup");
+ metaData.SetAliRootVersion(ALIROOT_SVN_BRANCH);
+ metaData.SetComment("Preprocessor AliTPC data base entries.");
+
+ Bool_t storeOK = Store("Calib", "Raw", rawArray, &metaData, 0, kTRUE);
+ if ( !storeOK ) ++result;
+ } else {
+ Log ("Error: no entries in raw file list!");
+ result = 1;
+ }
+
+ rawArray->Delete();
+ delete rawArray;
+
+ return result;
+}
+//______________________________________________________________________________________________
+
+UInt_t AliTPCPreprocessor::ExtractCE(Int_t sourceFXS)
+{
+ //
+ // Read Central Electrode file from file exchage server
+ //
+ //
+ AliTPCCalPad *ceTmean=0;
+ AliTPCCalPad *ceTrms=0;
+ AliTPCCalPad *ceQmean=0;
+ TObjArray *rocTtime=0;
+ TObjArray *rocQtime=0;
+
+ TObjArray *ceObjects= new TObjArray;
+
+
+ Int_t nSectors = fROC->GetNSectors();
+
+ ceTmean = new AliTPCCalPad("CETmean","CETmean");
+ ceObjects->Add(ceTmean);
+
+ ceTrms = new AliTPCCalPad("CETrms","CETrms");
+ ceObjects->Add(ceTrms);
+
+ ceQmean = new AliTPCCalPad("CEQmean","CEQmean");
+ ceObjects->Add(ceQmean);
+
+ rocTtime = new TObjArray(nSectors+2); // also make room for A and C side average
+ rocTtime->SetName("rocTtime");
+ ceObjects->Add(rocTtime);
+
+ rocQtime = new TObjArray(nSectors);
+ rocQtime->SetName("rocQtime");
+ ceObjects->Add(rocQtime);
+
+ //=== new part
+ TObjArray *arrFitGraphs=new TObjArray;
+ arrFitGraphs->SetName("ceFitsDrift");
+ ceObjects->Add(arrFitGraphs);
+
+// Temperature maps
+
+ if (fTemp) {
+ AliTPCSensorTempArray *tempMap = new AliTPCSensorTempArray(*fTemp);
+ tempMap->SetNameTitle("TempMap","TempMap");
+ ceObjects->Add(tempMap);
+ }
+
+// Pressure maps
+
+ if (fPressure) {
+ AliDCSSensor *sensor=0, *sensorCopy=0;
+ for (Int_t isensor=0; isensor<kNumPressureSensors; ++isensor ) {
+ sensor = fPressure->GetSensor(kPressureSensorNames[isensor]);
+ if (sensor) {
+ sensorCopy = new AliDCSSensor(*sensor);
+ sensorCopy->SetNameTitle(kPressureSensorNames[isensor],kPressureSensorNames[isensor]);
+ ceObjects->Add(sensorCopy);
+ }
+ }
+ }
+
+ UInt_t result=0;
+
+ TList* list = GetFileSources(sourceFXS,"CE");
+
+ if (list && list->GetEntries()>0) {
+
+// loop through all files from LDCs
+
+ UInt_t index = 0;
+ while (list->At(index)!=NULL) {
+ TObjString* fileNameEntry = (TObjString*) list->At(index);
+ if (fileNameEntry!=NULL) {
+ TString fileName = GetFile(sourceFXS, "CE",
+ fileNameEntry->GetString().Data());
+ AliTPCCalibCE *calCE=AliTPCCalibCE::ReadFromFile(fileName.Data());
+
+ if (!calCE) {
+ Log ("No valid calibCE object.");
+ result=2;
+ break;
+ }
+ // replace entries for the sectors available in the present file
+
+ for (Int_t sector=0; sector<nSectors; sector++) {
+ AliTPCCalROC *rocTmean=calCE->GetCalRocT0(sector);
+ if ( rocTmean ) ceTmean->SetCalROC(rocTmean,sector);
+ AliTPCCalROC *rocTrms=calCE->GetCalRocRMS(sector);
+ if ( rocTrms ) ceTrms->SetCalROC(rocTrms,sector);
+ AliTPCCalROC *rocQmean=calCE->GetCalRocQ(sector);
+ if ( rocQmean ) ceQmean->SetCalROC(rocQmean,sector);
+ TGraph *grT=calCE->MakeGraphTimeCE(sector,0,2); // T time graph
+ if ( grT ) rocTtime->AddAt(grT,sector);
+ TGraph *grQ=calCE->MakeGraphTimeCE(sector,0,3); // Q time graph
+ if ( grQ ) rocQtime->AddAt(grQ,sector);
+ }
+
+ TGraph *grT=calCE->MakeGraphTimeCE(-1,0,2); // A side average
+ if ( grT ) {
+ rocTtime->AddAt(grT,nSectors);
+ } else {
+ result=10;
+ }
+ grT=calCE->MakeGraphTimeCE(-2,0,2); // C side average
+ if ( grT ) {
+ rocTtime->AddAt(grT,nSectors+1);
+ } else {
+ result=10;
+ }
+
+ delete calCE;
+ }
+ ++index;
+ } // while(list)
+//
+// Check number of calibrated sectors per side
+//
+ Int_t aside=0, cside=0;
+ for (Int_t ind=0; ind<nSectors/4; ind++ ) {
+ TGraph *grT=(TGraph*)rocTtime->At(ind);
+ if (grT) aside++;
+ grT=(TGraph*)rocTtime->At(ind+nSectors/2);
+ if (grT) aside++;
+ grT=(TGraph*)rocTtime->At(ind+nSectors/4);
+ if (grT) cside++;
+ grT=(TGraph*)rocTtime->At(ind+3*nSectors/4);
+ if (grT) cside++;
+ }
+ if ( (aside<kMinCESectors) && (cside<kMinCESectors) ) {
+ Log (Form("ExtractCE: Too few fitted sectors: Aside =%d, Cside=%d\n",
+ aside, cside)) ;
+ result=10;
+ }
+
+ //
+ //=== New CE part
+ // if it is validated this part needs to be modified again
+ // currently its only processed if there is a valid standard CE object
+ //
+ list = GetFileSources(sourceFXS,"CEnew");
+
+ if (result==0 && list && list->GetEntries()>0) {
+
+// loop through all files from LDCs
+
+ UInt_t index2 = 0;
+ while (list->At(index2)!=NULL) {
+ TObjString* fileNameEntry = (TObjString*) list->At(index2);
+ if (fileNameEntry!=NULL) {
+ TString fileName = GetFile(sourceFXS, "CEnew",
+ fileNameEntry->GetString().Data());
+ AliTPCCalibCE *calCE=AliTPCCalibCE::ReadFromFile(fileName.Data());
+
+ if (!calCE) {
+ Log ("No valid new calibCE object.");
+// result=2;
+ break;
+ }
+
+ TIter nextObj(calCE->GetArrFitGraphs());
+ TObject *obj=0x0;
+ while ( (obj=nextObj()) ){
+ arrFitGraphs->Add(obj->Clone());
+ }
+ delete calCE;
+ }
+ ++index2;
+ }
+ }
+
+//
+// Store updated pedestal entry to OCDB
+//
+ AliCDBMetaData metaData;
+ metaData.SetBeamPeriod(0);
+ metaData.SetResponsible("Haavard Helstrup");
+ metaData.SetAliRootVersion(ALIROOT_SVN_BRANCH);
+ metaData.SetComment("Preprocessor AliTPC data base entries.");
+
+ if ( result == 0 ) {
+ Bool_t storeOK = Store("Calib", "CE", ceObjects, &metaData, 0, kTRUE);
+ if ( !storeOK ) ++result;
+ } else {
+ Log ("Warning: Average time graphs not available - no OCDB entry written");
+ }
+ } else {
+ Log ("Error: no CE entries available from FXS!");
+ result = 1;
+ }
+
+ ceObjects->Delete();
+ delete ceObjects;
+
+ return result;
+}
+//______________________________________________________________________________________________
+
+UInt_t AliTPCPreprocessor::ExtractQA(Int_t sourceFXS)
+{
+ //
+ // Read Quality Assurance file from file exchage server
+ //
+
+ UInt_t result=0;
+
+ TList* list = GetFileSources(sourceFXS,"QA");
+
+ if (list && list->GetEntries()>0) {
+
+// only one QA object should be available!
+
+ AliTPCdataQA *calQA;
+
+ UInt_t nentries = list->GetEntries();
+ UInt_t index=0;
+ if ( nentries > 1) Log ( "More than one QA entry. First one processed");
+ TObjString* fileNameEntry = (TObjString*) list->At(index);
+ if (fileNameEntry!=NULL) {
+ TString fileName = GetFile(sourceFXS, "QA",
+ fileNameEntry->GetString().Data());
+ TFile *f = TFile::Open(fileName);
+ if (!f) {
+ Log ("Error opening QA file.");
+ result =2;
+ } else {
+ f->GetObject("tpcCalibQA",calQA);
+ if ( calQA ) {
+//
+// Store updated pedestal entry to OCDB
+//
+ AliCDBMetaData metaData;
+ metaData.SetBeamPeriod(0);
+ metaData.SetResponsible("Haavard Helstrup");
+ metaData.SetAliRootVersion(ALIROOT_SVN_BRANCH);
+ metaData.SetComment("Preprocessor AliTPC data base entries.");
+
+ Bool_t storeOK = Store("Calib", "QA", calQA, &metaData, 0, kFALSE);
+ if ( !storeOK ) ++result;
+
+ delete calQA;
+ }
+ }
+ } else {
+ Log ("Error: no QA files on FXS!");
+ result = 2;
+ }
+ } else {
+ Log ("Error: no QA entries in FXS list!");
+ result = 1;
+ }
+ return result;
+}
+
+//______________________________________________________________________________________________
+
+
+UInt_t AliTPCPreprocessor::ExtractAltro(Int_t sourceFXS, TMap* dcsMap)
+{
+ //
+ // Read Altro configuration file from file exchage server
+ // Keep original entry from OCDB in case no new pulser calibration is available
+ //
+ TObjArray *altroObjects=0;
+ AliTPCCalPad *acqStart=0;
+ AliTPCCalPad *zsThr=0;
+ AliTPCCalPad *acqStop=0;
+ AliTPCCalPad *FPED=0;
+ AliTPCCalPad *masked=0;
+ AliTPCCalPad *k1=0, *k2=0, *k3=0;
+ AliTPCCalPad *l1=0, *l2=0, *l3=0;
+ TMap *mapRCUconfig=0;
+
+ AliCDBEntry* entry = GetFromOCDB("Calib", "AltroConfig");
+ if (entry) altroObjects = (TObjArray*)entry->GetObject();
+ if ( altroObjects==NULL ) {
+ Log("AliTPCPreprocsessor: No previous TPC altro calibration entry available.\n");
+ altroObjects = new TObjArray;
+ }
+
+ acqStart = (AliTPCCalPad*)altroObjects->FindObject("AcqStart");
+ if ( !acqStart ) {
+ acqStart = new AliTPCCalPad("AcqStart","AcqStart");
+ altroObjects->Add(acqStart);
+ }
+ zsThr = (AliTPCCalPad*)altroObjects->FindObject("ZsThr");
+ if ( !zsThr ) {
+ zsThr = new AliTPCCalPad("ZsThr","ZsThr");
+ altroObjects->Add(zsThr);
+ }
+ FPED = (AliTPCCalPad*)altroObjects->FindObject("FPED");
+ if ( !FPED ) {
+ FPED = new AliTPCCalPad("FPED","FPED");
+ altroObjects->Add(FPED);
+ }
+ acqStop = (AliTPCCalPad*)altroObjects->FindObject("AcqStop");
+ if ( !acqStop ) {
+ acqStop = new AliTPCCalPad("AcqStop","AcqStop");
+ altroObjects->Add(acqStop);
+ }
+ masked = (AliTPCCalPad*)altroObjects->FindObject("Masked");
+ if ( !masked ) {
+ masked = new AliTPCCalPad("Masked","Masked");
+ altroObjects->Add(masked);
+ }
+ k1 = (AliTPCCalPad*)altroObjects->FindObject("K1");
+ if ( !k1 ) {
+ k1 = new AliTPCCalPad("K1","K1");
+ altroObjects->Add(k1);
+ }
+ k2 = (AliTPCCalPad*)altroObjects->FindObject("K2");
+ if ( !k2 ) {
+ k2 = new AliTPCCalPad("K2","K2");
+ altroObjects->Add(k2);
+ }
+ k3 = (AliTPCCalPad*)altroObjects->FindObject("K3");
+ if ( !k3 ) {
+ k3 = new AliTPCCalPad("K3","K3");
+ altroObjects->Add(k3);
+ }
+ l1 = (AliTPCCalPad*)altroObjects->FindObject("L1");
+ if ( !l1 ) {
+ l1 = new AliTPCCalPad("L1","L1");
+ altroObjects->Add(l1);
+ }
+ l2 = (AliTPCCalPad*)altroObjects->FindObject("L2");
+ if ( !l2 ) {
+ l2 = new AliTPCCalPad("L2","L2");
+ altroObjects->Add(l2);
+ }
+ l3 = (AliTPCCalPad*)altroObjects->FindObject("L3");
+ if ( !l3 ) {
+ l3 = new AliTPCCalPad("L3","L3");
+ altroObjects->Add(l3);
+ }
+ mapRCUconfig = (TMap*)altroObjects->FindObject("RCUconfig");
+ if (!mapRCUconfig) {
+ mapRCUconfig = new TMap();
+ mapRCUconfig->SetName("RCUconfig");
+ altroObjects->Add(mapRCUconfig);
+ }
+
+
+ UInt_t result=0;
+ TString idFXS[2]={"AltroConfigA","AltroConfigC"};
+
+ Int_t nSectors = fROC->GetNSectors();
+ Bool_t changed=false;
+ if (altroObjects == 0 ) altroObjects = new TObjArray;
+
+// extract list of active DDLs
+
+ if (dcsMap) {
+ Bool_t found;
+ TString arrDDL(kNumDDL);
+ arrDDL.Append('x',kNumDDL);
+ for ( Int_t iDDL = 0; iDDL<kNumDDL; iDDL++ ) {
+ TString stringID = Form (kAmandaDDL.Data(),iDDL+kFirstDDL);
+ TPair *pair = (TPair*)dcsMap->FindObject(stringID.Data());
+ found = false;
+ if ( pair ) {
+ TObjArray *valueSet=(TObjArray*)pair->Value();
+ if ( valueSet) {
+ AliDCSValue *val = (AliDCSValue*)valueSet->At(0);
+ if (val) {
+ found = val->GetBool();
+ if (found){
+ arrDDL[iDDL] = '1';
+ } else {
+ arrDDL[iDDL] = '0';
+ }
+ }
+ }
+ }
+ }
+ TObjString *ddlArray = new TObjString;
+ ddlArray->SetString(arrDDL);
+ TMap *activeDDL = new TMap;
+ activeDDL->SetName("DDLArray");
+ TObjString *key = new TObjString("DDLArray");
+ activeDDL->Add(key,ddlArray);
+ altroObjects->Add(activeDDL);
+ changed=true;
+ } else {
+ Log ("ExtractAltro: No DCS map available. Active DDL list cannot be obtained.");
+ result = 3;
+ }
+
+// extract Altro configuration files
+
+ for ( Int_t id=0; id<2; id++) {
+ TList* list = GetFileSources(sourceFXS,idFXS[id].Data());
+
+ if (list && list->GetEntries()>0) {
+
+// loop through all files from LDCs
+
+ UInt_t index = 0;
+ while (list->At(index)!=NULL) {
+ TObjString* fileNameEntry = (TObjString*) list->At(index);
+ if (fileNameEntry!=NULL) {
+ TString fileName = GetFile(sourceFXS, idFXS[id].Data(),
+ fileNameEntry->GetString().Data());
+ TFile *f = TFile::Open(fileName);
+ if (!f) {
+ const int mess_length=40;
+ char message[mess_length];
+ snprintf(message,mess_length,"Error opening Altro configuration file, id = %d",id);
+ Log (message);
+ result =2;
+ break;
+ }
+ TObjArray *altroFXS;
+ f->GetObject("AltroConfig",altroFXS);
+ if ( !altroFXS ) {
+ Log ("No Altro configuration object in file.");
+ result = 2;
+ break;
+ }
+
+ // replace entries for the sectors available in the present file
+ AliTPCCalPad *acqStartFXS=(AliTPCCalPad*)altroFXS->FindObject("AcqStart");
+ AliTPCCalPad *zsThrFXS=(AliTPCCalPad*)altroFXS->FindObject("ZsThr");
+ AliTPCCalPad *acqStopFXS=(AliTPCCalPad*)altroFXS->FindObject("AcqStop");
+ AliTPCCalPad *FPEDFXS=(AliTPCCalPad*)altroFXS->FindObject("FPED");
+ AliTPCCalPad *maskedFXS=(AliTPCCalPad*)altroFXS->FindObject("Masked");
+ AliTPCCalPad *k1FXS=(AliTPCCalPad*)altroFXS->FindObject("K1");
+ AliTPCCalPad *k2FXS=(AliTPCCalPad*)altroFXS->FindObject("K2");
+ AliTPCCalPad *k3FXS=(AliTPCCalPad*)altroFXS->FindObject("K3");
+ AliTPCCalPad *l1FXS=(AliTPCCalPad*)altroFXS->FindObject("L1");
+ AliTPCCalPad *l2FXS=(AliTPCCalPad*)altroFXS->FindObject("L2");
+ AliTPCCalPad *l3FXS=(AliTPCCalPad*)altroFXS->FindObject("L3");
+ TMap *mapRCUconfigFXS = (TMap*)altroFXS->FindObject("RCUconfig");
+ TIterator *mapFXSiter = mapRCUconfigFXS->MakeIterator();
+
+ changed=true;
+ for (Int_t sector=0; sector<nSectors; sector++) {
+
+ if (acqStartFXS) {
+ AliTPCCalROC *rocAcqStart=acqStartFXS->GetCalROC(sector);
+ if ( rocAcqStart ) acqStart->SetCalROC(rocAcqStart,sector);
+ }
+ if (zsThrFXS ) {
+ AliTPCCalROC *rocZsThr=zsThrFXS->GetCalROC(sector);
+ if ( rocZsThr ) zsThr->SetCalROC(rocZsThr,sector);
+ }
+ if (acqStopFXS) {
+ AliTPCCalROC *rocAcqStop=acqStopFXS->GetCalROC(sector);
+ if ( rocAcqStop ) acqStop->SetCalROC(rocAcqStop,sector);
+ }
+ if (FPEDFXS ) {
+ AliTPCCalROC *rocFPED=FPEDFXS->GetCalROC(sector);
+ if ( rocFPED ) FPED->SetCalROC(rocFPED,sector);
+ }
+ if (maskedFXS) {
+ AliTPCCalROC *rocMasked=maskedFXS->GetCalROC(sector);
+ if ( rocMasked ) masked->SetCalROC(rocMasked,sector);
+ }
+ if (k1FXS) {
+ AliTPCCalROC *rocK1=k1FXS->GetCalROC(sector);
+ if ( rocK1 ) k1->SetCalROC(rocK1,sector);
+ }
+ if (k2FXS) {
+ AliTPCCalROC *rocK2=k2FXS->GetCalROC(sector);
+ if ( rocK2 ) k2->SetCalROC(rocK2,sector);
+ }
+ if (k3FXS) {
+ AliTPCCalROC *rocK3=k3FXS->GetCalROC(sector);
+ if ( rocK3 ) k3->SetCalROC(rocK3,sector);
+ }
+ if (l1FXS) {
+ AliTPCCalROC *rocL1=l1FXS->GetCalROC(sector);
+ if ( rocL1 ) l1->SetCalROC(rocL1,sector);
+ }
+ if (l2FXS) {
+ AliTPCCalROC *rocL2=l2FXS->GetCalROC(sector);
+ if ( rocL2 ) l2->SetCalROC(rocL2,sector);
+ }
+ if (l3FXS) {
+ AliTPCCalROC *rocL3=l3FXS->GetCalROC(sector);
+ if ( rocL3 ) l3->SetCalROC(rocL3,sector);
+ }
+ }
+ if (mapRCUconfigFXS) {
+ Int_t mapEntries = mapRCUconfigFXS->GetEntries();
+ TObjString* keyFXS;
+ TVectorF* vecFXS;
+ TVectorF* vec; // nSectors = 72 (total number of inner/outer sectors)
+ for (Int_t i=0; i<mapEntries; ++i) {
+ keyFXS=(TObjString*)mapFXSiter->Next();
+ vecFXS=(TVectorF*)mapRCUconfigFXS->GetValue(keyFXS);
+ vec=(TVectorF*)mapRCUconfig->GetValue(keyFXS);
+ if (!vec) {
+ vec = new TVectorF(3*nSectors);
+ *vec = -1;
+ mapRCUconfig->Add(keyFXS,vec);
+ }
+ if (vec->GetNoElements() != 3*nSectors ) {
+ vec->ResizeTo(3*nSectors);
+ }
+ if (id==0) { // A side
+ vec->SetSub(0,vecFXS->GetSub(0,nSectors/2-1));
+ vec->SetSub(nSectors,vecFXS->GetSub(nSectors,2*nSectors-1));
+ } else { // C side
+ vec->SetSub(nSectors/2,vecFXS->GetSub(nSectors/2,nSectors-1));
+ vec->SetSub(2*nSectors,vecFXS->GetSub(2*nSectors,3*nSectors-1));
+ }
+ }
+ }
+ delete altroFXS;
+ f->Close();
+ }
+ ++index;
+ } // while(list)
+ } else {
+ Log ("Error: no entries in AltroConfig file list!");
+ result = 1;
+ }
+
+ } // for - id
+//
+// Store updated pedestal entry to OCDB
+//
+ if (changed) {
+ AliCDBMetaData metaData;
+ metaData.SetBeamPeriod(0);
+ metaData.SetResponsible("Haavard Helstrup");
+ metaData.SetAliRootVersion(ALIROOT_SVN_BRANCH);
+ metaData.SetComment("Preprocessor AliTPC data base entries.");
+
+ Bool_t storeOK = Store("Calib", "AltroConfig", altroObjects, &metaData, 0, kFALSE);
+ if ( !storeOK ) ++result;
+ }
+
+ altroObjects->Delete();
+ delete altroObjects;
+
+ return result;
}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff