-\documentclass[11pt,a4paper]{article}\r
-\usepackage[latin1]{inputenc}\r
-\usepackage[english]{babel}\r
-\usepackage{amsmath}\r
-\usepackage{amsfonts}\r
-\usepackage{amssymb}\r
-\usepackage{hyperref}\r
-\usepackage[a4paper, left=1.5cm, right=1cm, top=2cm]{geometry}\r
-%\author{Marian Ivano, Nicole Martin, Patrick Reichelt and Jens Wiechula}\r
-%\title{Naming conventions for trending variables and QA WEB directory}\r
-\begin{document}\r
-\title{Naming conventions for trending variables and QA WEB directory}\r
-\author{Marian Ivano, Nicole Martin, Patrick Riechelt and Jens Wiechula}\r
-\maketitle\r
-\r
-This file explains the definition of the naming convention for trending variables and the QA WEB directory. You can also find a presentation explaining the naming conventions for the trending variables here: \r
-\url{https://indico.cern.ch/getFile.py/access?contribId=4&resId=0&materialId=slides&confId=171449} . \r
-As well as a presentation explaining the naming conventions for the QA WEB directory here:\r
-\url{https://indico.cern.ch/getFile.py/access?contribId=3&resId=0&materialId=slides&confId=235865}.\r
-\r
-\section{Trending variables}\r
-\r
-\subsection{General}\r
-\r
-\begin{itemize}\r
-\r
-\item Seperate `properties' by a `\_' : \\ \setlength{\parskip}{1pt} \r
-\r
-Variable name as main identifyer \hspace*{3cm} Statisctics and fit propertie \\ \r
-\hspace*{0.3cm} $ \downarrow $ \hspace*{10cm} $ \downarrow $ \r
-\r
- \small{Type\_ SideA/C\_ ChargePlus/Minus\_ StatisicType(StatMean/StatRMS/StatChi2/FitSlope/FitMean/FitSigma)\_ Err} \\ \r
- \hspace*{1.5cm} $ \uparrow $\hspace*{2cm} $ \uparrow $ \hspace*{13.1cm} $ \uparrow $ \\\r
- \hspace*{1cm} Further type specifications \hspace*{10cm} Error of an-\hspace*{15.5cm} other variable\r
- \r
-\item Further description: \\\r
- Type: Variable name as main identifyer \\\r
- SideA/C and ChargePlus/Minus: Further type specifications $ \rightarrow $ Side and particle type \\\r
- StatisicType: Statisctics and fit properties \\\r
- Err: Indicates that this is an error of another variable with the same name \\\r
- \r
- \item IROC vs OROC: Differentiate variables which are different for IRCO's and OROC's by: \_ IROC\_ or \_OROC \_\r
-\r
-\end{itemize}\r
-\r
-\subsection{Special variables}\r
-\r
-To avoid confusions between similar short cuts for variables please respect the following capital and small letters!!!\r
-\r
-\begin{itemize}\r
- \r
-\item velocity vs voltage \r
-\r
-v = velocity (small) \\\r
-V = voltage (capital)\r
-\r
-\item time vs temperature\r
-\r
-t = time (small)\\\r
-T = temperature (capital)\r
-\r
-\item momentum vs pressure\r
-\r
-p = momentum (small) \\\r
-P = pressure (capital)\r
-\r
-\end{itemize}\r
-\r
-\r
-\subsection{Statistic vs Gau\ss{} fit variables}\r
-\r
-Please use the prefix 'Stat' or 'Fit' to diffenrentiate between statistic and Gau\ss{} fit variables: \\ \setlength{\parskip}{1pt}\r
- \r
-StatMean --- FitMean \\\r
-\hspace*{0.5cm} StatRMS --- FitSigma\r
-\r
-\subsection{Examples}\r
-\r
-The following examples should illustrate the naming convention and help you to implement it.\r
-\r
-\subsubsection{QA tree}\r
-\begin{tabular}{l l}\r
-%\hline \r
-Old & New \\ \r
-\hline \r
- & \\\r
-%\hline \r
-meanTPCnclF & TPCnclF\_ StatMean \\ \r
-%\hline \r
-slopeATPCnclF & TPCnclF\_ SideA\_ FitSlope\\ \r
-%\hline \r
-SlopeATPCnclFErr & TPCnclF\_ SideA\_ FitSlope\_ Err\\ \r
-%\hline \r
-SlopedZAErrPos & dZ\_ SideA\_ ChargePlus\_ FitSlope\_ Err\\ \r
-%\hline \r
-\end{tabular} \r
-\r
-\subsubsection{OCDB tree}\r
-\begin{tabular}{ l l}\r
-%\hline \r
-Old & New \\ \r
-\hline \r
- & \\ \r
-%\hline \r
-VIROC & V\_ IROC\\ \r
-%\hline \r
-medianVIROC & V\_ IROC\_ StatMedian \\ \r
-%\hline \r
-rocGainIROC & rocGain\_ IROC \\ \r
-%\hline \r
-rocGAinERRIROC & rocGain\_ IROC\_ Err\\ \r
-%\hline \r
-\end{tabular} \r
-\r
-%\r
-% Old ------------------ New\r
-% \r
-% meanTPCnclF ------------------ TPCnclF_StatMean\r
-% slopeATPCnclF ------------------ TPCnclF_SideA_FitSlope \r
-% SlopeATPCnclFErr ------------------ TPCnclF_SideA_FitSlope_Err\r
-% SlopedZAErrPos ------------------ dZ_SideA_ChargePlus_FitSlope_Err\r
-%\r
-%4.2) OCDB tree\r
-%\r
-% Old ------------------ New\r
-% \r
-% VIROC ------------------ V_IROC\r
-% medianVIROC ------------------ V_IROC_StatMedian\r
-% rocGainIROC ------------------ rocGain_IROC\r
-% rocGAinERRIROC ------------------ rocGain_IROC_Err\r
-\r
-\section{QA WEB directory}\r
-\r
-The generic path, where everything goes, has to follow this convention: \\\r
-\parindent0pt\r
-\r
-\framebox{PATH=\${prefix}/\${datatype}/\${year}/\${period}/\${recopass}/\${suffix}} \\\r
-\r
-\begin{itemize}\r
-\r
-\item with prefix according to the website of the respective institute and detector \r
-\item e.g. at GSI:\r
-\r
-\subitem Official: prefix $=$ http://www-alice.gsi.de/TPC/PWG1train \\\r
-\subitem Development: prefix $=$ http://web-docs.gsi.de/{\raise.17ex\hbox{$\scriptstyle\mathtt{\sim}$}}username/TPC/PWG1train \\\r
-\r
-\item datatype: datatype $=$ data or datatype $=$ sim (nothing like data\_year anymore!) \\\r
-\item suffix: StandardQA or ExpertQA or CalibrationQA or ExpertCalibrationQA \\\r
-\r
-\end{itemize}\r
-\r
-\underline{Also to be used by all detectors which will merge trending trees with the TPC}\r
-\begin{itemize}\r
-\item rootfiles with the trees should have a static name, e.g. trending.root, TRDtree.root, ...\r
-\r
-\end{itemize}\r
-\r
+\documentclass[11pt,a4paper]{article}
+\usepackage[latin1]{inputenc}
+\usepackage[english]{babel}
+\usepackage{amsmath}
+\usepackage{amsfonts}
+\usepackage{amssymb}
+\usepackage{hyperref}
+\usepackage[a4paper, left=1.5cm, right=1cm, top=2cm]{geometry}
+%\author{Marian Ivano, Nicole Martin, Patrick Reichelt and Jens Wiechula}
+%\title{Naming conventions for trending variables and QA WEB directory}
+\begin{document}
+\title{Naming conventions for trending variables and QA WEB directory}
+\author{Marian Ivano, Nicole Martin, Patrick Riechelt and Jens Wiechula}
+\maketitle
+
+This file explains the definition of the naming convention for trending variables and the QA WEB directory. You can also find a presentation explaining the naming conventions for the trending variables here:
+\url{https://indico.cern.ch/getFile.py/access?contribId=4&resId=0&materialId=slides&confId=171449} .
+As well as a presentation explaining the naming conventions for the QA WEB directory here:
+\url{https://indico.cern.ch/getFile.py/access?contribId=3&resId=0&materialId=slides&confId=235865}.
+
+\section{Trending variables}
+
+\subsection{General}
+
+\begin{itemize}
+
+\item Seperate `properties' by a `\_' : \\ \setlength{\parskip}{1pt}
+
+Variable name as main identifyer \hspace*{3cm} Statisctics and fit propertie \\
+\hspace*{0.3cm} $ \downarrow $ \hspace*{10cm} $ \downarrow $
+
+ \small{Type\_ SideA/C\_ ChargePlus/Minus\_ StatisicType(StatMean/StatRMS/StatChi2/FitSlope/FitMean/FitSigma)\_ Err} \\
+ \hspace*{1.5cm} $ \uparrow $\hspace*{2cm} $ \uparrow $ \hspace*{13.1cm} $ \uparrow $ \\
+ \hspace*{1cm} Further type specifications \hspace*{10cm} Error of an-\hspace*{15.5cm} other variable
+
+\item Further description: \\
+ Type: Variable name as main identifyer \\
+ SideA/C and ChargePlus/Minus: Further type specifications $ \rightarrow $ Side and particle type \\
+ StatisicType: Statisctics and fit properties \\
+ Err: Indicates that this is an error of another variable with the same name \\
+
+ \item IROC vs OROC: Differentiate variables which are different for IRCO's and OROC's by: \_ IROC\_ or \_OROC \_
+
+\end{itemize}
+
+\subsection{Special variables}
+
+To avoid confusions between similar short cuts for variables please respect the following capital and small letters!!!
+
+\begin{itemize}
+
+\item velocity vs voltage
+
+v = velocity (small) \\
+V = voltage (capital)
+
+\item time vs temperature
+
+t = time (small)\\
+T = temperature (capital)
+
+\item momentum vs pressure
+
+p = momentum (small) \\
+P = pressure (capital)
+
+\end{itemize}
+
+
+\subsection{Statistic vs Gau\ss{} fit variables}
+
+Please use the prefix 'Stat' or 'Fit' to diffenrentiate between statistic and Gau\ss{} fit variables: \\ \setlength{\parskip}{1pt}
+
+StatMean --- FitMean \\
+\hspace*{0.5cm} StatRMS --- FitSigma
+
+\subsection{Examples}
+
+The following examples should illustrate the naming convention and help you to implement it.
+
+\subsubsection{QA tree}
+\begin{tabular}{l l}
+%\hline
+Old & New \\
+\hline
+ & \\
+%\hline
+meanTPCnclF & TPCnclF\_ StatMean \\
+%\hline
+slopeATPCnclF & TPCnclF\_ SideA\_ FitSlope\\
+%\hline
+SlopeATPCnclFErr & TPCnclF\_ SideA\_ FitSlope\_ Err\\
+%\hline
+SlopedZAErrPos & dZ\_ SideA\_ ChargePlus\_ FitSlope\_ Err\\
+%\hline
+\end{tabular}
+
+\subsubsection{OCDB tree}
+\begin{tabular}{ l l}
+%\hline
+Old & New \\
+\hline
+ & \\
+%\hline
+VIROC & V\_ IROC\\
+%\hline
+medianVIROC & V\_ IROC\_ StatMedian \\
+%\hline
+rocGainIROC & rocGain\_ IROC \\
+%\hline
+rocGAinERRIROC & rocGain\_ IROC\_ Err\\
+%\hline
+\end{tabular}
+
+%
+% Old ------------------ New
+%
+% meanTPCnclF ------------------ TPCnclF_StatMean
+% slopeATPCnclF ------------------ TPCnclF_SideA_FitSlope
+% SlopeATPCnclFErr ------------------ TPCnclF_SideA_FitSlope_Err
+% SlopedZAErrPos ------------------ dZ_SideA_ChargePlus_FitSlope_Err
+%
+%4.2) OCDB tree
+%
+% Old ------------------ New
+%
+% VIROC ------------------ V_IROC
+% medianVIROC ------------------ V_IROC_StatMedian
+% rocGainIROC ------------------ rocGain_IROC
+% rocGAinERRIROC ------------------ rocGain_IROC_Err
+
+\section{QA WEB directory}
+
+The generic path, where everything goes, has to follow this convention: \\
+\parindent0pt
+
+\framebox{PATH=\${prefix}/\${datatype}/\${year}/\${period}/\${recopass}/\${suffix}} \\
+
+\begin{itemize}
+
+\item with prefix according to the website of the respective institute and detector
+\item e.g. at GSI:
+
+\subitem Official: prefix $=$ http://www-alice.gsi.de/TPC/PWG1train \\
+\subitem Development: prefix $=$ http://web-docs.gsi.de/{\raise.17ex\hbox{$\scriptstyle\mathtt{\sim}$}}username/TPC/PWG1train \\
+
+\item datatype: datatype $=$ data or datatype $=$ sim (nothing like data\_year anymore!) \\
+\item suffix: StandardQA or ExpertQA or CalibrationQA or ExpertCalibrationQA \\
+
+\end{itemize}
+
+\underline{Also to be used by all detectors which will merge trending trees with the TPC}
+\begin{itemize}
+\item rootfiles with the trees should have a static name, e.g. trending.root, TRDtree.root, ...
+
+\end{itemize}
+
\end{document}
\ No newline at end of file
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff