--- /dev/null
+//
+// Parameter for the TRD
+//
+
+//_____________________________________________________________________________
+// Geometry parameter
+
+const Int_t kNsect = 18; // Number of sectors in the full detector
+const Int_t kNplan = 6; // Number of planes of the TRD
+
+const Float_t kRmin = 294.0; // r-dimensions of the TRD
+const Float_t kRmax = 368.0;
+
+const Float_t kZmax1 = 378.35; // z-dimensions of the TRD
+const Float_t kZmax2 = 302.0;
+
+const Float_t kSheight = 74.0; // Height of the TRD-volume in spaceframe
+const Float_t kSwidth1 = 103.674; // Lower width of the TRD-volume in spaceframe
+const Float_t kSwidth2 = 129.768; // Upper width of the TRD-volume in spaceframe
+const Float_t kSlength = 751.0; // Length of the TRD-volume in spaceframe
+
+const Float_t kCheight = 11.0; // Height of the chambers
+const Float_t kCspace = 1.6; // Vertical spacing of the chambers
+const Float_t kCaframe = 2.675; // Height of the aluminum frame
+const Float_t kCathick = 1.0; // Thickness of the aluminum frame
+const Float_t kCcthick = 1.0; // Thickness of the carbon frame
+
+const Float_t kCwidcha = (kSwidth2 - kSwidth1) / kSheight * (kCheight + kCspace);
+const Float_t kCcframe = kCheight - kCaframe;
+
+// Thicknesses of the the material layers
+const Float_t kSeThick = 0.02; // Radiator seal
+const Float_t kRaThick = 4.8; // Radiator
+const Float_t kPeThick = 0.20; // PE-layer in the radiator
+const Float_t kMyThick = 0.005; // Mylar-layer
+const Float_t kXeThick = 3.5; // Gas mixture
+const Float_t kDrThick = 3.0; // Drift region
+const Float_t kAmThick = kXeThick - kDrThick; // Amplification region
+
+const Float_t kCuThick = 0.001; // Pad plane
+const Float_t kSuThick = 0.06; // HEXCEL+G10 support structure (= 0.31% X0)
+const Float_t kFeThick = 0.0044; // FEE + signal lines (= 0.31% X0)
+const Float_t kCoThick = 0.02; // PE of the cooling device
+const Float_t kWaThick = 0.01; // Cooling water
+
+// Position of the material layers
+const Float_t kSeZpos = -4.1525; // Radiator seal
+const Float_t kRaZpos = -1.7425; // Radiator
+const Float_t kPeZpos = 0.0000; // PE-layer in the radiator
+const Float_t kMyZpos = 0.6600; // Mylar-layer
+const Float_t kDrZpos = 2.1625; // Drift region
+const Float_t kAmZpos = 4.1125; // Amplification region
+
+const Float_t kCuZpos = -1.3370; // Pad plane
+const Float_t kSuZpos = 0.0000; // Support structure
+const Float_t kFeZpos = 1.3053; // FEE + signal lines
+const Float_t kCoZpos = 1.3175; // PE of the cooling device
+const Float_t kWaZpos = 1.3325; // Cooling Water
+
+//_____________________________________________________________________________