// //
///////////////////////////////////////////////////////////////////////////////
-#include "TObjArray.h"
-
#include "AliGeometry.h"
class TGeoHMatrix;
virtual Int_t IsVersion() { return 1; }
virtual Bool_t Impact(const TParticle* ) const { return kTRUE; }
virtual Bool_t IsHole(Int_t la, Int_t st, Int_t se) const;
-
- virtual Bool_t RotateBack(Int_t det, Double_t *loc, Double_t *glb) const;
+ virtual Bool_t IsOnBoundary(Int_t det, Float_t y, Float_t z, Float_t eps = .5) const;
+ virtual Bool_t RotateBack(Int_t det, const Double_t * const loc, Double_t *glb) const;
Bool_t ChamberInGeometry(Int_t det);
- void GroupChamber(Int_t ilayer, Int_t istack, Int_t *idtmed);
+ void AssembleChamber(Int_t ilayer, Int_t istack);
void CreateFrame(Int_t *idtmed);
void CreateServices(Int_t *idtmed);
- Bool_t CreateClusterMatrixArray();
- TGeoHMatrix *GetClusterMatrix(Int_t det) { return (TGeoHMatrix *)
- fClusterMatrixArray->At(det); }
+ static Bool_t CreateClusterMatrixArray();
+ static TGeoHMatrix *GetClusterMatrix(Int_t det);
void SetSMstatus(Int_t sm, Char_t status) { fSMstatus[sm] = status; }
Int_t GetStack(Double_t z, Int_t layer);
static Int_t GetSector(Int_t det);
- void CreatePadPlaneArray();
- AliTRDpadPlane *CreatePadPlane(Int_t layer, Int_t stack);
- AliTRDpadPlane *GetPadPlane(Int_t layer, Int_t stack);
- AliTRDpadPlane *GetPadPlane(Int_t det) { return GetPadPlane(GetLayer(det)
+ static void CreatePadPlaneArray();
+ static AliTRDpadPlane *CreatePadPlane(Int_t layer, Int_t stack);
+ static AliTRDpadPlane *GetPadPlane(Int_t layer, Int_t stack);
+ static AliTRDpadPlane *GetPadPlane(Int_t det) { return GetPadPlane(GetLayer(det)
,GetStack(det)); }
- Int_t GetRowMax(Int_t layer, Int_t stack, Int_t /*sector*/);
- Int_t GetColMax(Int_t layer);
- Double_t GetRow0(Int_t layer, Int_t stack, Int_t /*sector*/);
- Double_t GetCol0(Int_t layer);
+ static Int_t GetRowMax(Int_t layer, Int_t stack, Int_t /*sector*/);
+ static Int_t GetColMax(Int_t layer);
+ static Double_t GetRow0(Int_t layer, Int_t stack, Int_t /*sector*/);
+ static Double_t GetCol0(Int_t layer);
static Float_t GetTime0(Int_t layer) { return fgkTime0[layer]; }
static Double_t GetXtrdEnd() { return fgkXtrdEnd; }
Char_t GetSMstatus(Int_t sm) const { return fSMstatus[sm]; }
- Float_t GetChamberWidth(Int_t layer) const { return fCwidth[layer] ; }
- Float_t GetChamberLength(Int_t layer, Int_t stack) const { return fClength[layer][stack]; }
+ static Float_t GetChamberWidth(Int_t layer) { return fgkCwidth[layer] ; }
+ static Float_t GetChamberLength(Int_t layer, Int_t stack) { return fgkClength[layer][stack]; }
virtual void GetGlobal(const AliRecPoint*, TVector3&, TMatrixF& ) const { };
virtual void GetGlobal(const AliRecPoint*, TVector3& ) const { };
static Int_t Ndet() { return fgkNdet; }
static Float_t Cheight() { return fgkCH; }
+ static Float_t CheightSV() { return fgkCHsv; }
static Float_t Cspace() { return fgkVspace; }
static Float_t CraHght() { return fgkCraH; }
static Float_t CdrHght() { return fgkCdrH; }
static Float_t CamHght() { return fgkCamH; }
static Float_t CroHght() { return fgkCroH; }
+ static Float_t CsvHght() { return fgkCsvH; }
static Float_t CroWid() { return fgkCroW; }
static Float_t AnodePos() { return fgkAnodePos; }
- static Float_t MyThick() { return fgkMyThick; }
+ static Float_t MyThick() { return fgkRMyThick; }
static Float_t DrThick() { return fgkDrThick; }
static Float_t AmThick() { return fgkAmThick; }
static Float_t DrZpos() { return fgkDrZpos; }
static const Float_t fgkCdrH; // Height of the drift region of the chambers
static const Float_t fgkCamH; // Height of the amplification region of the chambers
static const Float_t fgkCroH; // Height of the readout of the chambers
- static const Float_t fgkCH; // Total height of the chambers
+ static const Float_t fgkCsvH; // Height of the services on top of the chambers
+ static const Float_t fgkCH; // Total height of the chambers (w/o services)
+ static const Float_t fgkCHsv; // Total height of the chambers (with services)
static const Float_t fgkAnodePos; // Distance of anode wire plane relative to alignabl volume
static const Float_t fgkVspace; // Vertical spacing of the chambers
static const Float_t fgkHspace; // Horizontal spacing of the chambers
static const Float_t fgkVrocsm; // Radial distance of the first ROC to the outer SM plates
+
static const Float_t fgkCalT; // Thickness of the lower aluminum frame
- static const Float_t fgkCalW; // Width of additional aluminum on lower frame
+ static const Float_t fgkCalW; // Width of additional aluminum ledge on lower frame
+ static const Float_t fgkCalH; // Height of additional aluminum ledge on lower frame
+ static const Float_t fgkCalWmod; // Width of additional aluminum ledge on lower frame
+ static const Float_t fgkCalHmod; // Height of additional aluminum ledge on lower frame
+ static const Float_t fgkCwsW; // Width of additional wacosit ledge on lower frame
+ static const Float_t fgkCwsH; // Height of additional wacosit ledge on lower frame
static const Float_t fgkCclsT; // Thickness of the lower Wacosit frame sides
static const Float_t fgkCclfT; // Thickness of the lower Wacosit frame front
static const Float_t fgkCglT; // Thichness of the glue around the radiator
- static const Float_t fgkCcuT; // Thickness of the upper Wacosit frame
+ static const Float_t fgkCcuTa; // Thickness of the upper Wacosit frame around amp. region
+ static const Float_t fgkCcuTb; // Thickness of the upper Wacosit frame around amp. region
static const Float_t fgkCauT; // Thickness of the aluminum frame of the back panel
-
static const Float_t fgkCroW; // Additional width of the readout chamber frames
static const Float_t fgkCpadW; // Difference of outer chamber width and pad plane width
static const Float_t fgkRpadW; // Difference of outer chamber width and pad plane width
- static const Float_t fgkMyThick; // Thickness of the mylar-layer
- static const Float_t fgkRaThick; // Thickness of the radiator
static const Float_t fgkXeThick; // Thickness of the gas volume
static const Float_t fgkDrThick; // Thickness of the drift region
static const Float_t fgkAmThick; // Thickness of the amplification region
static const Float_t fgkWrThick; // Thickness of the wire planes
- static const Float_t fgkCuThick; // Thickness of the pad plane
- static const Float_t fgkGlThick; // Thickness of the glue layer
- static const Float_t fgkSuThick; // Thickness of the NOMEX support structure
- static const Float_t fgkRpThick; // Thickness of the PCB readout boards
- static const Float_t fgkRcThick; // Thickness of the PCB copper layers
- static const Float_t fgkRoThick; // Thickness of all other ROB componentes (caps, etc.)
-
- static const Float_t fgkRaZpos; // Position of the radiator
+
+ static const Float_t fgkPPdThick; // Thickness of copper of the pad plane
+ static const Float_t fgkPPpThick; // Thickness of PCB board of the pad plane
+ static const Float_t fgkPGlThick; // Thickness of the glue layer
+ static const Float_t fgkPCbThick; // Thickness of the carbon layers
+ static const Float_t fgkPHcThick; // Thickness of the honeycomb support structure
+ static const Float_t fgkPPcThick; // Thickness of the PCB readout boards
+ static const Float_t fgkPRbThick; // Thickness of the PCB copper layers
+ static const Float_t fgkPElThick; // Thickness of all other electronics components (caps, etc.)
+
+ static const Float_t fgkRFbThick; // Thickness of the fiber layers in the radiator
+ static const Float_t fgkRRhThick; // Thickness of the rohacell layers in the radiator
+ static const Float_t fgkRGlThick; // Thickness of the glue layers in the radiator
+ static const Float_t fgkRCbThick; // Thickness of the carbon layers in the radiator
+ static const Float_t fgkRMyThick; // Thickness of the mylar layers in the radiator
+
static const Float_t fgkDrZpos; // Position of the drift region
static const Float_t fgkAmZpos; // Position of the amplification region
- static const Float_t fgkWrZpos; // Position of the wire planes
- static const Float_t fgkCuZpos; // Position of the pad plane
- static const Float_t fgkGlZpos; // Position of the glue layer
- static const Float_t fgkSuZpos; // Position of the HEXCEL+G10 support structure
- static const Float_t fgkRpZpos; // Position of the PCB readout boards
- static const Float_t fgkRcZpos; // Position of the PCB copper layers
- static const Float_t fgkRoZpos; // Position of all other ROB componentes (caps, etc.)
+ static const Float_t fgkWrZposA; // Position of the wire planes
+ static const Float_t fgkWrZposB; // Position of the wire planes
+ static const Float_t fgkCalZpos; // Position of the additional aluminum ledges
static const Int_t fgkMCMmax; // Maximum number of MCMs per ROB
static const Int_t fgkMCMrow; // Maximum number of MCMs per ROB Row
static const Int_t fgkRowmaxC0; // Maximum number of Rows per C0 chamber
static const Int_t fgkRowmaxC1; // Maximum number of Rows per C1 chamber
- Float_t fCwidth[kNlayer]; // Outer widths of the chambers
- Float_t fClength[kNlayer][kNstack]; // Outer lengths of the chambers
+ static const Float_t fgkCwidth[kNlayer]; // Outer widths of the chambers
+ static const Float_t fgkClength[kNlayer][kNstack]; // Outer lengths of the chambers
- Float_t fRotB11[kNsector]; // Matrix elements for the backward rotation
- Float_t fRotB12[kNsector]; // Matrix elements for the backward rotation
- Float_t fRotB21[kNsector]; // Matrix elements for the backward rotation
- Float_t fRotB22[kNsector]; // Matrix elements for the backward rotation
+ Float_t fRotB11[kNsector]; // Matrix elements for the backward rotation
+ Float_t fRotB12[kNsector]; // Matrix elements for the backward rotation
+ Float_t fRotB21[kNsector]; // Matrix elements for the backward rotation
+ Float_t fRotB22[kNsector]; // Matrix elements for the backward rotation
static const Double_t fgkTime0Base; // Base value for calculation of Time-position of pad 0
static const Float_t fgkTime0[kNlayer]; // Time-position of pad 0
static const Double_t fgkXtrdBeg; // X-coordinate in tracking system of begin of TRD mother volume
static const Double_t fgkXtrdEnd; // X-coordinate in tracking system of end of TRD mother volume
- Float_t fChamberUAorig[3*kNdets][3]; // Volumes origin in
- Float_t fChamberUDorig[3*kNdets][3]; // the chamber
- Float_t fChamberUForig[3*kNdets][3]; // [3] = x, y, z
- Float_t fChamberUUorig[3*kNdets][3]; //
-
- Float_t fChamberUAboxd[3*kNdets][3]; // Volumes box
- Float_t fChamberUDboxd[3*kNdets][3]; // dimensions (half)
- Float_t fChamberUFboxd[3*kNdets][3]; // [3] = x, y, z
- Float_t fChamberUUboxd[3*kNdets][3]; //
-
- TObjArray *fClusterMatrixArray; //! Transformation matrices loc. cluster to tracking cs
- TObjArray *fPadPlaneArray; //! Array of pad plane objects
+ static TObjArray *fgClusterMatrixArray; //! Transformation matrices loc. cluster to tracking cs
+ static TObjArray *fgPadPlaneArray; //! Array of pad plane objects
Char_t fSMstatus[kNsector]; // Super module status byte
- ClassDef(AliTRDgeometry,22) // TRD geometry class
+ ClassDef(AliTRDgeometry,24) // TRD geometry class
};
#endif
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff