#include <TParticle.h>
// --- AliRoot classes
+#include "AliLog.h"
#include "AliConst.h"
#include "AliMagF.h"
#include "AliRun.h"
}
//
// Parameters for hadronic calorimeters geometry
+ // Positions updated after post-installation measurements
fDimZN[0] = 3.52;
fDimZN[1] = 3.52;
fDimZN[2] = 50.;
fDimZP[2] = 75.;
fPosZNC[0] = 0.;
fPosZNC[1] = 1.2;
- fPosZNC[2] = -11600.;
- fPosZPC[0] = 23.9;
+ fPosZNC[2] = -11397.3;
+ fPosZPC[0] = 24.35;
fPosZPC[1] = 0.;
- fPosZPC[2] = -11600.;
+ fPosZPC[2] = -11389.3;
fPosZNA[0] = 0.;
fPosZNA[1] = 1.2;
- fPosZNA[2] = 11620.;
- fPosZPA[0] = 24.;
+ fPosZNA[2] = 11395.8;
+ fPosZPA[0] = 24.35;
fPosZPA[1] = 0.;
- fPosZPA[2] = 11620.;
+ fPosZPA[2] = 11387.8;
fFibZN[0] = 0.;
fFibZN[1] = 0.01825;
fFibZN[2] = 50.;
gMC->Gspos("ZDCC", 1, "ALIC", 0., 0., 0., 0, "ONLY");
- // -- FIRST SECTION OF THE BEAM PIPE (from compensator dipole to
- // the beginning of D1)
+ // -- BEAM PIPE from compensator dipole to the beginning of D1)
tubpar[0] = 6.3/2.;
tubpar[1] = 6.7/2.;
// From beginning of ZDC volumes to beginning of D1
gMC->Gsvolu("QT01", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QT01", 1, "ZDCC", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
// Ch.debug
- //printf(" QT01 TUBE pipe from z = %f to z= %f (D1 beg.)\n",-zd1,-2*tubpar[2]-zd1);
+ //printf(" QT01 TUBE pipe from z = %1.2f to z= %1.2f (D1 beg.)\n",-zd1,-2*tubpar[2]-zd1);
- //-- SECOND SECTION OF THE BEAM PIPE (from the end of D1 to the
- // beginning of D2)
-
- //-- FROM MAGNETIC BEGINNING OF D1 TO MAGNETIC END OF D1 + 13.5 cm
- //-- Cylindrical pipe (r = 3.47) + conical flare
+ //-- BEAM PIPE from the end of D1 to the beginning of D2)
+ //-- FROM MAGNETIC BEGINNING OF D1 TO MAGNETIC END OF D1
+ //-- Cylindrical pipe (r = 3.47) + conical flare
// -> Beginning of D1
zd1 += 2.*tubpar[2];
- tubpar[0] = 3.47;
- tubpar[1] = 3.47+0.2;
- tubpar[2] = 958.5/2.;
+ tubpar[0] = 6.94/2.;
+ tubpar[1] = 7.34/2.;
+ tubpar[2] = (6909.8-zd1)/2.;
gMC->Gsvolu("QT02", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QT02", 1, "ZDCC", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
// Ch.debug
- //printf(" QT02 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
+ //printf(" QT02 TUBE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*tubpar[2]-zd1);
+
+ zd1 += 2.*tubpar[2];
+
+ tubpar[0] = 9./2.;
+ tubpar[1] = 9.6/2.;
+ tubpar[2] = (7022.8-zd1)/2.;
+ gMC->Gsvolu("QT03", "TUBE", idtmed[7], tubpar, 3);
+ gMC->Gspos("QT03", 1, "ZDCC", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
+ // Ch.debug
+ //printf(" QT03 TUBE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*tubpar[2]-zd1);
zd1 += 2.*tubpar[2];
- conpar[0] = 25./2.;
- conpar[1] = 10./2.;
- conpar[2] = 10.4/2.;
- conpar[3] = 6.44/2.;
- conpar[4] = 6.84/2.;
+ conpar[0] = 39.2/2.;
+ conpar[1] = 18./2.;
+ conpar[2] = 18.6/2.;
+ conpar[3] = 9./2.;
+ conpar[4] = 9.6/2.;
gMC->Gsvolu("QC01", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QC01", 1, "ZDCC", 0., 0., -conpar[0]-zd1, 0, "ONLY");
// Ch.debug
- //printf(" QC01 CONE pipe from z = %f to z= %f\n",-zd1,-2*conpar[0]-zd1);
-
- zd1 += 2.*conpar[0];
+ //printf(" QC01 CONE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*conpar[0]-zd1);
- tubpar[0] = 10./2.;
- tubpar[1] = 10.4/2.;
- tubpar[2] = (50.+10.+3.16+190.)/2.;
- gMC->Gsvolu("QT03", "TUBE", idtmed[7], tubpar, 3);
- gMC->Gspos("QT03", 1, "ZDCC", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
+ zd1 += conpar[0] * 2.;
+
+ // ******************************************************
+ // N.B.-> according to last vacuum layout
+ // private communication by D. Macina, mail 27/1/2009
+ // ******************************************************
+ // 2nd section of VCTCQ+VAMTF+TCTVB+VAMTF+TCLIA+VAMTF+1st part of VCTCP
+ Float_t totLength1 = 160.8 + 78. + 148. + 78. + 148. + 78. + 9.3;
+ //
+ tubpar[0] = 18.6/2.;
+ tubpar[1] = 7.6/2.;
+ tubpar[2] = totLength1/2.;
+ gMC->Gsvolu("QE01", "ELTU", idtmed[7], tubpar, 3);
+
+ tubpar[0] = 18.0/2.;
+ tubpar[1] = 7.0/2.;
+ tubpar[2] = totLength1/2.;
+ gMC->Gsvolu("QE02", "ELTU", idtmed[10], tubpar, 3);
+ gMC->Gspos("QE02", 1, "ZDCC", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
+ gMC->Gspos("QE02", 1, "QE01", 0., 0., 0., 0, "ONLY");
// Ch.debug
- //printf(" QT03 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
+ //printf(" QE02 ELTU from z = %1.2f to z= %1.2f\n",-zd1,-2*tubpar[2]-zd1);
- zd1 += tubpar[2]*2.;
+ zd1 += tubpar[2] * 2.;
- conpar[0] = 30./2.;
- conpar[1] = 20.6/2.;
- conpar[2] = 21./2.;
- conpar[3] = 10./2.;
- conpar[4] = 10.4/2.;
+ // 2nd part of VCTCP
+ conpar[0] = 31.5/2.;
+ conpar[1] = 21.27/2.;
+ conpar[2] = 21.87/2.;
+ conpar[3] = 18.0/2.;
+ conpar[4] = 18.6/2.;
gMC->Gsvolu("QC02", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QC02", 1, "ZDCC", 0., 0., -conpar[0]-zd1, 0, "ONLY");
// Ch.debug
- //printf(" QC02 CONE pipe from z = %f to z= %f\n",-zd1,-2*conpar[0]-zd1);
+ //printf(" QC02 CONE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*conpar[0]-zd1);
zd1 += conpar[0] * 2.;
-
- tubpar[0] = 20.6/2.;
- tubpar[1] = 21./2.;
- tubpar[2] = 450./2.;
+
+ // 3rd section of VCTCP+VCDWC+VMLGB
+ Float_t totLenght2 = 9.2 + 530.5+40.;
+ tubpar[0] = 21.2/2.;
+ tubpar[1] = 21.9/2.;
+ tubpar[2] = totLenght2/2.;
gMC->Gsvolu("QT04", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QT04", 1, "ZDCC", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
// Ch.debug
- //printf(" QT04 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
+ //printf(" QT04 TUBE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*tubpar[2]-zd1);
zd1 += tubpar[2] * 2.;
- conpar[0] = 13.6/2.;
- conpar[1] = 25.4/2.;
- conpar[2] = 25.8/2.;
- conpar[3] = 20.6/2.;
- conpar[4] = 21./2.;
+ // First part of VCTCD
+ // skewed transition cone from ID=212.7 mm to ID=797 mm
+ conpar[0] = 121./2.;
+ conpar[1] = 79.7/2.;
+ conpar[2] = 81.3/2.;
+ conpar[3] = 21.27/2.;
+ conpar[4] = 21.87/2.;
gMC->Gsvolu("QC03", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QC03", 1, "ZDCC", 0., 0., -conpar[0]-zd1, 0, "ONLY");
// Ch.debug
- //printf(" QC03 CONE pipe from z = %f to z= %f\n",-zd1,-2*conpar[0]-zd1);
+ //printf(" QC03 CONE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*conpar[0]-zd1);
- zd1 += conpar[0] * 2.;
+ zd1 += 2.*conpar[0];
- tubpar[0] = 25.4/2.;
- tubpar[1] = 25.8/2.;
- tubpar[2] = 205.8/2.;
+ // VCDGB + 1st part of VCTCH
+ tubpar[0] = 79.7/2.;
+ tubpar[1] = 81.3/2.;
+ tubpar[2] = (5*475.2+97.)/2.;
gMC->Gsvolu("QT05", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QT05", 1, "ZDCC", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
// Ch.debug
- //printf(" QT05 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
+ //printf(" QT05 TUBE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*tubpar[2]-zd1);
- zd1 += tubpar[2] * 2.;
-
- tubpar[0] = 50./2.;
- tubpar[1] = 50.4/2.;
- tubpar[2] = (515.4+690.+778.5)/2.;
- gMC->Gsvolu("QT06", "TUBE", idtmed[7], tubpar, 3);
- gMC->Gspos("QT06", 1, "ZDCC", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
- // Ch.debug
- //printf(" QT06 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
-
- zd1 += tubpar[2] * 2.;
+ zd1 += 2.*tubpar[2];
+
+ // 2nd part of VCTCH
+ // Transition from ID=797 mm to ID=196 mm:
+ // in order to simulate the thin window opened in the transition cone
+ // we divide the transition cone in three cones:
+ // (1) 8 mm thick (2) 3 mm thick (3) the third 8 mm thick
- conpar[0] = 14.18/2.;
- conpar[1] = 55./2.;
- conpar[2] = 55.4/2.;
- conpar[3] = 50./2.;
- conpar[4] = 50.4/2.;
+ // (1) 8 mm thick
+ conpar[0] = 9.09/2.; // 15 degree
+ conpar[1] = 74.82868/2.;
+ conpar[2] = 76.42868/2.; // thickness 8 mm
+ conpar[3] = 79.7/2.;
+ conpar[4] = 81.3/2.; // thickness 8 mm
gMC->Gsvolu("QC04", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QC04", 1, "ZDCC", 0., 0., -conpar[0]-zd1, 0, "ONLY");
// Ch.debug
- //printf(" QC04 CONE pipe from z = %f to z= %f\n",-zd1,-2*conpar[0]-zd1);
+ //printf(" QC04 CONE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*conpar[0]-zd1);
+
+ zd1 += 2.*conpar[0];
+
+ // (2) 3 mm thick
+ conpar[0] = 96.2/2.; // 15 degree
+ conpar[1] = 23.19588/2.;
+ conpar[2] = 23.79588/2.; // thickness 3 mm
+ conpar[3] = 74.82868/2.;
+ conpar[4] = 75.42868/2.; // thickness 3 mm
+ gMC->Gsvolu("QC05", "CONE", idtmed[7], conpar, 5);
+ gMC->Gspos("QC05", 1, "ZDCC", 0., 0., -conpar[0]-zd1, 0, "ONLY");
+ // Ch.debug
+ //printf(" QC05 CONE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*conpar[0]-zd1);
+
+ zd1 += 2.*conpar[0];
- zd1 += conpar[0] * 2.;
+ // (3) 8 mm thick
+ conpar[0] = 6.71/2.; // 15 degree
+ conpar[1] = 19.6/2.;
+ conpar[2] = 21.2/2.;// thickness 8 mm
+ conpar[3] = 23.19588/2.;
+ conpar[4] = 24.79588/2.;// thickness 8 mm
+ gMC->Gsvolu("QC06", "CONE", idtmed[7], conpar, 5);
+ gMC->Gspos("QC06", 1, "ZDCC", 0., 0., -conpar[0]-zd1, 0, "ONLY");
+ // Ch.debug
+ //printf(" QC06 CONE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*conpar[0]-zd1);
+
+ zd1 += 2.*conpar[0];
- tubpar[0] = 55./2.;
- tubpar[1] = 55.4/2.;
- tubpar[2] = 730./2.;
+ // VMZAR (5 volumes)
+ tubpar[0] = 20.2/2.;
+ tubpar[1] = 20.6/2.;
+ tubpar[2] = 2.15/2.;
+ gMC->Gsvolu("QT06", "TUBE", idtmed[7], tubpar, 3);
+ gMC->Gspos("QT06", 1, "ZDCC", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
+ // Ch.debug
+ //printf(" QT06 TUBE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*tubpar[2]-zd1);
+
+ zd1 += 2.*tubpar[2];
+
+ conpar[0] = 6.9/2.;
+ conpar[1] = 23.9/2.;
+ conpar[2] = 24.3/2.;
+ conpar[3] = 20.2/2.;
+ conpar[4] = 20.6/2.;
+ gMC->Gsvolu("QC07", "CONE", idtmed[7], conpar, 5);
+ gMC->Gspos("QC07", 1, "ZDCC", 0., 0., -conpar[0]-zd1, 0, "ONLY");
+ // Ch.debug
+ //printf(" QC07 CONE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*conpar[0]-zd1);
+
+ zd1 += 2.*conpar[0];
+
+ tubpar[0] = 23.9/2.;
+ tubpar[1] = 25.5/2.;
+ tubpar[2] = 17.0/2.;
gMC->Gsvolu("QT07", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QT07", 1, "ZDCC", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
// Ch.debug
- //printf(" QT07 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
-
- zd1 += tubpar[2] * 2.;
+ //printf(" QT07 TUBE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*tubpar[2]-zd1);
+
+ zd1 += 2.*tubpar[2];
- conpar[0] = 36.86/2.;
- conpar[1] = 68./2.;
- conpar[2] = 68.4/2.;
- conpar[3] = 55./2.;
- conpar[4] = 55.4/2.;
- gMC->Gsvolu("QC05", "CONE", idtmed[7], conpar, 5);
- gMC->Gspos("QC05", 1, "ZDCC", 0., 0., -conpar[0]-zd1, 0, "ONLY");
+ conpar[0] = 6.9/2.;
+ conpar[1] = 20.2/2.;
+ conpar[2] = 20.6/2.;
+ conpar[3] = 23.9/2.;
+ conpar[4] = 24.3/2.;
+ gMC->Gsvolu("QC08", "CONE", idtmed[7], conpar, 5);
+ gMC->Gspos("QC08", 1, "ZDCC", 0., 0., -conpar[0]-zd1, 0, "ONLY");
// Ch.debug
- //printf(" QC05 CONE pipe from z = %f to z= %f\n",-zd1,-2*conpar[0]-zd1);
-
- zd1 += conpar[0] * 2.;
+ //printf(" QC08 CONE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*conpar[0]-zd1);
+
+ zd1 += 2.*conpar[0];
- tubpar[0] = 68./2.;
- tubpar[1] = 68.4/2.;
- tubpar[2] = 848.6/2.;
+ tubpar[0] = 20.2/2.;
+ tubpar[1] = 20.6/2.;
+ tubpar[2] = 2.15/2.;
gMC->Gsvolu("QT08", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QT08", 1, "ZDCC", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
// Ch.debug
- //printf(" QT08 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
+ //printf(" QT08 TUBE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*tubpar[2]-zd1);
+
+ zd1 += 2.*tubpar[2];
- zd1 += tubpar[2] * 2.;
+ // Flange (ID=196 mm)(last part of VMZAR and first part of VCTYB)
+ tubpar[0] = 19.6/2.;
+ tubpar[1] = 25.3/2.;
+ tubpar[2] = 4.9/2.;
+ gMC->Gsvolu("QT09", "TUBE", idtmed[7], tubpar, 3);
+ gMC->Gspos("QT09", 1, "ZDCC", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
+ // Ch.debug
+ //printf(" QT09 TUBE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*tubpar[2]-zd1);
+
+ zd1 += 2.*tubpar[2];
+ // Ch.debug
+ //printf(" Beginning of VCTYB volume @ z = %1.2f \n",-zd1);
+
+ // simulation of the trousers (VCTYB)
+ tubpar[0] = 19.6/2.;
+ tubpar[1] = 20.0/2.;
+ tubpar[2] = 3.9/2.;
+ gMC->Gsvolu("QT10", "TUBE", idtmed[7], tubpar, 3);
+ gMC->Gspos("QT10", 1, "ZDCC", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
+ // Ch.debug
+ //printf(" QT10 TUBE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*tubpar[2]-zd1);
+
+ zd1 += 2.*tubpar[2];
+
+ // transition cone from ID=196. to ID=216.6
+ conpar[0] = 32.55/2.;
+ conpar[1] = 21.66/2.;
+ conpar[2] = 22.06/2.;
+ conpar[3] = 19.6/2.;
+ conpar[4] = 20.0/2.;
+ gMC->Gsvolu("QC09", "CONE", idtmed[7], conpar, 5);
+ gMC->Gspos("QC09", 1, "ZDCC", 0., 0., -conpar[0]-zd1, 0, "ONLY");
+ // Ch.debug
+ //printf(" QC09 CONE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*conpar[0]-zd1);
+
+ zd1 += 2.*conpar[0];
+
+ // tube
+ tubpar[0] = 21.66/2.;
+ tubpar[1] = 22.06/2.;
+ tubpar[2] = 28.6/2.;
+ gMC->Gsvolu("QT11", "TUBE", idtmed[7], tubpar, 3);
+ gMC->Gspos("QT11", 1, "ZDCC", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
+ // Ch.debug
+ //printf(" QT11 TUBE pipe from z = %1.2f to z= %1.2f\n",-zd1,-2*tubpar[2]-zd1);
+
+ zd1 += 2.*tubpar[2];
+ // Ch.debug
+ //printf(" Beginning of recombination chamber @ z = %f \n",-zd1);
// --------------------------------------------------------
// RECOMBINATION CHAMBER IMPLEMENTED USING TGeo CLASSES!!!!
pQCLext->SetVisLeaves(kTRUE);
//
TGeoTranslation *tr1c = new TGeoTranslation(0., 0., (Double_t) -conpar[0]-0.95-zd1);
- //printf(" Recombination chamber from z = %f to z= %f\n",-zd1,-2*conpar[0]-0.95-zd1);
+ //printf(" Recombination chamber from z = %1.2f to z= %1.2f\n",-zd1,-2*conpar[0]-0.95-zd1);
//
pZDCC->AddNode(pQCLext, 1, tr1c);
// Inner trousers
tubpar[0] = 5.4/2.;
tubpar[1] = 5.8/2.;
tubpar[2] = 40.0/2.;
- gMC->Gsvolu("QC14", "TUBE", idtmed[7], tubpar, 3);
- gMC->Gspos("QC14", 1, "ZDCC", -15.8/2., 0., -tubpar[2]-zd1, 0, "ONLY");
- gMC->Gspos("QC14", 2, "ZDCC", 15.8/2., 0., -tubpar[2]-zd1, 0, "ONLY");
+ gMC->Gsvolu("QT12", "TUBE", idtmed[7], tubpar, 3);
+ gMC->Gspos("QT12", 1, "ZDCC", -15.8/2., 0., -tubpar[2]-zd1, 0, "ONLY");
+ gMC->Gspos("QT12", 2, "ZDCC", 15.8/2., 0., -tubpar[2]-zd1, 0, "ONLY");
// Ch.debug
- //printf(" QC14 TUBE from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
+ //printf(" QT12 TUBE from z = %1.2f to z= %1.2f\n",-zd1,-2*tubpar[2]-zd1);
zd1 += 2.*tubpar[2];
conpar[2] = 5.8/2.;
conpar[3] = 6.3/2.;
conpar[4] = 7.0/2.;
- gMC->Gsvolu("QC15", "CONE", idtmed[7], conpar, 5);
- gMC->Gspos("QC15", 1, "ZDCC", -7.9-0.175, 0., -conpar[0]-0.1-zd1, irotpipe1, "ONLY");
- gMC->Gspos("QC15", 2, "ZDCC", 7.9+0.175, 0., -conpar[0]-0.1-zd1, irotpipe2, "ONLY");
- //printf(" QC15 CONE from z = %f to z= %f\n",-zd1,-2*conpar[0]-0.2-zd1);
+ gMC->Gsvolu("QC10", "CONE", idtmed[7], conpar, 5);
+ gMC->Gspos("QC10", 1, "ZDCC", -7.9-0.175, 0., -conpar[0]-0.1-zd1, irotpipe1, "ONLY");
+ gMC->Gspos("QC10", 2, "ZDCC", 7.9+0.175, 0., -conpar[0]-0.1-zd1, irotpipe2, "ONLY");
+ //printf(" QC10 CONE from z = %1.2f to z= %1.2f\n",-zd1,-2*conpar[0]-0.2-zd1);
zd1 += 2.*conpar[0]+0.2;
tubpar[0] = 6.3/2.;
tubpar[1] = 7.0/2.;
tubpar[2] = 639.8/2.;
- gMC->Gsvolu("QC16", "TUBE", idtmed[7], tubpar, 3);
- gMC->Gspos("QC16", 1, "ZDCC", -16.5/2., 0., -tubpar[2]-zd1, 0, "ONLY");
- gMC->Gspos("QC16", 2, "ZDCC", 16.5/2., 0., -tubpar[2]-zd1, 0, "ONLY");
- //printf(" QC16 TUBE from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
+ gMC->Gsvolu("QT13", "TUBE", idtmed[7], tubpar, 3);
+ gMC->Gspos("QT13", 1, "ZDCC", -16.5/2., 0., -tubpar[2]-zd1, 0, "ONLY");
+ gMC->Gspos("QT13", 2, "ZDCC", 16.5/2., 0., -tubpar[2]-zd1, 0, "ONLY");
+ //printf(" QT13 TUBE from z = %1.2f to z= %1.2f\n",-zd1,-2*tubpar[2]-zd1);
zd1 += 2.*tubpar[2];
- //printf("\n END OF SIDE C BEAM PIPE DEFINITION @ z = %f\n",-zd1);
+ //printf(" END OF SIDE C BEAM PIPE DEFINITION @ z = %f\n",-zd1);
// -- Luminometer (Cu box) in front of ZN - side C
boxpar[2] = 15./2.;
gMC->Gsvolu("QLUC", "BOX ", idtmed[6], boxpar, 3);
gMC->Gspos("QLUC", 1, "ZDCC", 0., 0., fPosZNC[2]+66.+boxpar[2], 0, "ONLY");
- //printf(" QLUC LUMINOMETER from z = %f to z= %f\n", fPosZNC[2]+66., fPosZNC[2]+66.+2*boxpar[2]);
+ //printf(" QLUC LUMINOMETER from z = %1.2f to z= %1.2f\n", fPosZNC[2]+66., fPosZNC[2]+66.+2*boxpar[2]);
// -- END OF BEAM PIPE VOLUME DEFINITION FOR SIDE C (RB26 SIDE)
// ----------------------------------------------------------------
gMC->Gsvolu("QA01", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QA01", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA01 TUBE centred in %f from z = %f to z = %f (IT begin)\n",tubpar[2]+zd2,zd2,2*tubpar[2]+zd2);
+ //printf(" QA01 TUBE centred in %f from z = %1.2f to z= %1.2f (IT begin)\n",tubpar[2]+zd2,zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
gMC->Gsvolu("QA02", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QA02", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA02 TUBE from z = %f to z = %f (D1 begin)\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QA02 TUBE from z = %1.2f to z= %1.2f (D1 begin)\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
// 1) 80.1 cm still with ID = 6.75 radial beam screen
// 2) 2.5 cm conical section from ID = 6.75 to ID = 8.0 cm
// 3) 43.9 cm straight section (tube) with ID = 8.0 cm
- //
- //printf("\n Beginning of D1 at z = %f\n",zd2);
tubpar[0] = 6.75/2.;
tubpar[1] = 7.15/2.;
gMC->Gsvolu("QA03", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QA03", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA03 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QA03 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
conpar[4] = 8.4/2.;
gMC->Gsvolu("QA04", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QA04", 1, "ZDCA", 0., 0., conpar[0]+zd2, 0, "ONLY");
- //printf("\n QA04 CONE from z = %f to z = %f\n",zd2,2*conpar[0]+zd2);
+ //printf(" QA04 CONE from z = %1.2f to z= %1.2f\n",zd2,2*conpar[0]+zd2);
zd2 += 2.*conpar[0];
gMC->Gsvolu("QA05", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QA05", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA05 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QA05 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
conpar[4] = 10.2/2.;
gMC->Gsvolu("QAV1", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QAV1", 1, "ZDCA", 0., 0., conpar[0]+zd2, 0, "ONLY");
- //printf("\n QAV1 CONE from z = %f to z = %f\n",zd2,2*conpar[0]+zd2);
+ //printf(" QAV1 CONE from z = %1.2f to z= %1.2f\n",zd2,2*conpar[0]+zd2);
zd2 += 2.*conpar[0];
conpar[4] = 9.4/2.;
gMC->Gsvolu("QAV2", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QAV2", 1, "ZDCA", 0., 0., conpar[0]+zd2, 0, "ONLY");
- //printf("\n QAV2 CONE from z = %f to z = %f\n",zd2,2*conpar[0]+zd2);
+ //printf(" QAV2 CONE from z = %1.2f to z= %1.2f\n",zd2,2*conpar[0]+zd2);
zd2 += 2.*conpar[0];
gMC->Gsvolu("QAV3", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QAV3", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QAV3 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QAV3 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
conpar[4] = 13.0/2.;
gMC->Gsvolu("Q01T", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("Q01T", 1, "ZDCA", 0., 0., conpar[0]+zd2, 0, "ONLY");
- //printf("\n Q01T CONE from z = %f to z = %f\n",zd2,2*conpar[0]+zd2);
+ //printf(" Q01T CONE from z = %1.2f to z= %1.2f\n",zd2,2*conpar[0]+zd2);
zd2 += 2.*conpar[0];
gMC->Gsvolu("Q02T", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("Q02T", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n Q02T TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" Q02T TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
conpar[4] = 14.2/2.;
gMC->Gsvolu("Q03T", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("Q03T", 1, "ZDCA", 0., 0., conpar[0]+zd2, 0, "ONLY");
- //printf("\n Q03T CONE from z = %f to z = %f\n",zd2,2*conpar[0]+zd2);
+ //printf(" Q03T CONE from z = %1.2f to z= %1.2f\n",zd2,2*conpar[0]+zd2);
zd2 += 2.*conpar[0];
gMC->Gsvolu("Q04T", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("Q04T", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n Q04T TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" Q04T TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
gMC->Gsvolu("Q05T", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("Q05T", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n Q05T TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" Q05T TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
gMC->Gsvolu("Q06T", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("Q06T", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n Q06T TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" Q06T TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
conpar[4] = 18.4/2.;
gMC->Gsvolu("Q07T", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("Q07T", 1, "ZDCA", 0., 0., conpar[0]+zd2, 0, "ONLY");
- //printf("\n Q07T CONE from z = %f to z = %f\n",zd2,2*conpar[0]+zd2);
+ //printf(" Q07T CONE from z = %1.2f to z= %1.2f\n",zd2,2*conpar[0]+zd2);
zd2 += 2.*conpar[0];
tubspar[4] = 180.;
gMC->Gsvolu("Q08T", "TUBS", idtmed[7], tubspar, 5);
// Ch.debug
- //printf("\n upper part : one single phi segment of a tube (Q08T)\n");
+ //printf(" upper part : one single phi segment of a tube (Q08T)\n");
// rectangular beam pipe inside TCDD upper section (Vacuum)
boxpar[0] = 7.0/2.;
tubpar[1] = 7.4/2.;
tubpar[2] = 313.3/2.;
gMC->Gsvolu("QA06", "ELTU", idtmed[7], tubpar, 3);
- //printf("\n QA06 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QA06 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
tubpar[0] = 18.0/2.;
tubpar[1] = 7.0/2.;
tubpar[2] = 313.3/2.;
gMC->Gsvolu("QA07", "ELTU", idtmed[10], tubpar, 3);
- //printf("\n QA07 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QA07 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
gMC->Gspos("QA06", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
gMC->Gspos("QA07", 1, "QA06", 0., 0., 0., 0, "ONLY");
gMC->Gsvolu("QA08", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QA08", 1, "ZDCA", 0., 0., conpar[0]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA08 CONE from z = %Third part of VCTCR: tube (ID=196 mm) f to z = %f\n",zd2,2*conpar[0]+zd2);
+ //printf(" QA08 CONE from z = %Third part of VCTCR: tube (ID=196 mm) f to z = %f\n",zd2,2*conpar[0]+zd2);
zd2 += 2.*conpar[0];
tubpar[2] = 195.7/2.;
gMC->Gsvolu("QA09", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QA09", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
- //printf("\n QA09 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QA09 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
gMC->Gsvolu("QA10", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QA10", 1, "ZDCA", -1.66, 0., conpar[0]+0.73+zd2, irotpipe4, "ONLY");
// Ch.debug
- //printf("\n QA10 skewed CONE from z = %f to z = %f\n",zd2,2*conpar[0]+0.73+1.13+zd2);
+ //printf(" QA10 skewed CONE from z = %1.2f to z= %1.2f\n",zd2,2*conpar[0]+0.73+1.13+zd2);
zd2 += 2.*conpar[0]+0.73+1.13;
gMC->Gsvolu("Q13T", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("Q13T", 1, "Q13TM", 0., 0., 0., 0, "ONLY");
// Ch.debug
- //printf("\n Q13T TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" Q13T TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
gMC->Gsvolu("QA11", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QA11", 1, "ZDCA", 4.32-3.8, 0., conpar[0]+2.92+zd2, irotpipe5, "ONLY");
// Ch.debug
- //printf("\n QA11 skewed CONE from z = %f to z =%f\n",zd2,2*conpar[0]+2.92+1.89+zd2);
+ //printf(" QA11 skewed CONE from z = %f to z =%f\n",zd2,2*conpar[0]+2.92+1.89+zd2);
zd2 += 2.*conpar[0]+2.92+1.89;
- // The following tube ID 212.7 mm --- (volume QA14)
+ // The following tube ID 212.7 mm
// represents VMBGA (400 mm) + VCDWE (300 mm) + VMBGA (400 mm) +
// BTVTS (600 mm) + VMLGB (400 mm)
tubpar[0] = 21.27/2.;
gMC->Gsvolu("QA12", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QA12", 1, "ZDCA", 4., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA12 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QA12 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
conpar[4] = 81.3/2.;
gMC->Gsvolu("QA13", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QA13", 1, "ZDCA", 4.-2., 0., conpar[0]+0.37+zd2, irotpipe3, "ONLY");
- //printf("\n QA13 CONE from z = %f to z = %f\n",zd2,2*conpar[0]+0.37+1.35+zd2);
+ // Ch.debug
+ //printf(" QA13 CONE from z = %1.2f to z= %1.2f\n",zd2,2*conpar[0]+0.37+1.35+zd2);
zd2 += 2.*conpar[0]+0.37+1.35;
gMC->Gsvolu("QA14", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QA14", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA14 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QA14 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
conpar[4] = 76.42868/2.; // thickness 8 mm
gMC->Gsvolu("QA15", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QA15", 1, "ZDCA", 0., 0., conpar[0]+zd2, 0, "ONLY");
- //printf("\n QA15 CONE from z = %f to z = %f\n",zd2,2*conpar[0]+zd2);
+ //printf(" QA15 CONE from z = %1.2f to z= %1.2f\n",zd2,2*conpar[0]+zd2);
zd2 += 2.*conpar[0];
conpar[4] = 23.79588/2.; // thickness 3 mm
gMC->Gsvolu("QA16", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QA16", 1, "ZDCA", 0., 0., conpar[0]+zd2, 0, "ONLY");
- //printf("\n QA16 CONE from z = %f to z = %f\n",zd2,2*conpar[0]+zd2);
+ //printf(" QA16 CONE from z = %1.2f to z= %1.2f\n",zd2,2*conpar[0]+zd2);
zd2 += 2.*conpar[0];
conpar[4] = 21.2/2.;// thickness 8 mm
gMC->Gsvolu("QA17", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QA17", 1, "ZDCA", 0., 0., conpar[0]+zd2, 0, "ONLY");
- //printf("\n QA19 CONE from z = %f to z = %f\n",zd2,2*conpar[0]+zd2);
+ //printf(" QA19 CONE from z = %1.2f to z= %1.2f\n",zd2,2*conpar[0]+zd2);
zd2 += 2.*conpar[0];
gMC->Gsvolu("QA18", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QA18", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA18 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QA18 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
gMC->Gsvolu("QF01", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QF01", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QF01 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QF01 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
gMC->Gsvolu("QA19", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QA19", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA19 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QA19 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
gMC->Gsvolu("QA20", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QA20", 1, "ZDCA", 0., 0., conpar[0]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA20 CONE from z = %f to z = %f\n",zd2,2*conpar[0]+zd2);
+ //printf(" QA20 CONE from z = %1.2f to z= %1.2f\n",zd2,2*conpar[0]+zd2);
zd2 += 2.*conpar[0];
gMC->Gsvolu("QA21", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QA21", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA21 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QA21 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
gMC->Gsvolu("QA22", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QA22", 1, "ZDCA", 0., 0., conpar[0]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA22 CONE from z = %f to z = %f\n",zd2,2*conpar[0]+zd2);
+ //printf(" QA22 CONE from z = %1.2f to z= %1.2f\n",zd2,2*conpar[0]+zd2);
zd2 += 2.*conpar[0];
gMC->Gsvolu("QA23", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QA23", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA23 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QA23 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
gMC->Gsvolu("QF02", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QF02", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QF02 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QF02 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
gMC->Gsvolu("QA24", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QA24", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA24 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QA24 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
gMC->Gsvolu("QA25", "CONE", idtmed[7], conpar, 5);
gMC->Gspos("QA25", 1, "ZDCA", 0., 0., conpar[0]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA25 CONE from z = %f to z = %f\n",zd2,2*conpar[0]+zd2);
+ //printf(" QA25 CONE from z = %1.2f to z= %1.2f\n",zd2,2*conpar[0]+zd2);
zd2 += 2.*conpar[0];
gMC->Gsvolu("QA26", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QA26", 1, "ZDCA", 0., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA26 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QA26 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
gMC->Gspos("QA27", 1, "ZDCA", -15.8/2., 0., tubpar[2]+zd2, 0, "ONLY");
gMC->Gspos("QA27", 2, "ZDCA", 15.8/2., 0., tubpar[2]+zd2, 0, "ONLY");
// Ch.debug
- //printf("\n QA27 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QA27 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
conpar[3] = 6.3/2.;
conpar[4] = 7.0/2.;
gMC->Gsvolu("QA28", "CONE", idtmed[7], conpar, 5);
- gMC->Gspos("QA28", 1, "ZDCA", -7.9-0.175, 0., conpar[0]+0.5+zd2, irotpipe3, "ONLY");
- gMC->Gspos("QA28", 2, "ZDCA", 7.9+0.175, 0., conpar[0]+0.5+zd2, irotpipe4, "ONLY");
- printf("\n QA28 CONE from z = %f to z = %f\n",zd2,2*conpar[0]+0.2+zd2);
+ gMC->Gspos("QA28", 1, "ZDCA", -7.9-0.175, 0., conpar[0]+0.5+zd2, irotpipe1, "ONLY");
+ gMC->Gspos("QA28", 2, "ZDCA", 7.9+0.175, 0., conpar[0]+0.5+zd2, irotpipe2, "ONLY");
+ //printf(" QA28 CONE from z = %1.2f to z= %1.2f\n",zd2,2*conpar[0]+0.2+zd2);
zd2 += 2.*conpar[0]+1.;
- // Flange to simulate the support for the trousers
- tubspar[0] = 7.0/2.;
- tubspar[1] = 14.0/2.;
- tubspar[2] = 2.0/2.;
- tubspar[3] = -90.;
- tubspar[4] = 90.;
- gMC->Gsvolu("QF03", "TUBS", idtmed[7], tubspar, 5);
- gMC->Gspos("QF03", 1, "ZDCA", 16.5/2., 0., tubspar[2]+zd2, 0, "ONLY");
-
// 2 tubes (ID = 63 mm OD=70 mm)
tubpar[0] = 6.3/2.;
tubpar[1] = 7.0/2.;
gMC->Gsvolu("QA29", "TUBE", idtmed[7], tubpar, 3);
gMC->Gspos("QA29", 1, "ZDCA", -16.5/2., 0., tubpar[2]+zd2, 0, "ONLY");
gMC->Gspos("QA29", 2, "ZDCA", 16.5/2., 0., tubpar[2]+zd2, 0, "ONLY");
- printf("\n QA29 TUBE from z = %f to z = %f\n",zd2,2*tubpar[2]+zd2);
+ //printf(" QA29 TUBE from z = %1.2f to z= %1.2f\n",zd2,2*tubpar[2]+zd2);
zd2 += 2.*tubpar[2];
boxpar[2] = 15./2.;
gMC->Gsvolu("QLUA", "BOX ", idtmed[6], boxpar, 3);
gMC->Gspos("QLUA", 1, "ZDCA", 0., 0., fPosZNA[2]-66.-boxpar[2], 0, "ONLY");
- //printf("\n QLUA LUMINOMETER from z = %f to z = %f\n\n", fPosZNA[2]-66., fPosZNA[2]-66.-2*boxpar[2]);
+ //printf(" QLUA LUMINOMETER from z = %1.2f to z= %1.2f\n\n", fPosZNA[2]-66., fPosZNA[2]-66.-2*boxpar[2]);
- //printf("\n END OF BEAM PIPE VOLUME DEFINITION AT z = %f\n",zd2);
+ //printf(" END OF BEAM PIPE VOLUME DEFINITION AT z = %f\n",zd2);
// ----------------------------------------------------------------
gMC->Gspos("YD1 ", 1, "ZDCC", 0., 0., -tubpar[2]-zD1, 0, "ONLY");
gMC->Gspos("MD1 ", 1, "ZDCC", 0., 0., -tubpar[2]-zD1, 0, "ONLY");
// Ch debug
- //printf(" MD1 from z = %f to z = %f cm\n",-zD1, -zD1-2*tubpar[2]);
+ //printf(" MD1 from z = %1.2f to z= %1.2f cm\n",-zD1, -zD1-2*tubpar[2]);
// -- DIPOLE D2
zD2 = 12167.8;
gMC->Gspos("YD2 ", 1, "ZDCC", 0., 0., -tubpar[2]-zD2, 0, "ONLY");
// Ch debug
- //printf(" YD2 from z = %f to z = %f cm\n",-zD2, -zD2-2*tubpar[2]);
+ //printf(" YD2 from z = %1.2f to z= %1.2f cm\n",-zD2, -zD2-2*tubpar[2]);
gMC->Gspos("MD2 ", 1, "YD2 ", -9.4, 0., 0., 0, "ONLY");
gMC->Gspos("MD2 ", 2, "YD2 ", 9.4, 0., 0., 0, "ONLY");
gMC->Gsatt("QT11","SEEN",1);
gMC->Gsatt("QT12","SEEN",1);
gMC->Gsatt("QT13","SEEN",1);
- gMC->Gsatt("QT14","SEEN",1);
- gMC->Gsatt("QT15","SEEN",1);
- gMC->Gsatt("QT16","SEEN",1);
- gMC->Gsatt("QT17","SEEN",1);
- gMC->Gsatt("QT18","SEEN",1);
gMC->Gsatt("QC01","SEEN",1);
gMC->Gsatt("QC02","SEEN",1);
gMC->Gsatt("QC03","SEEN",1);
gMC->Gsatt("QC04","SEEN",1);
gMC->Gsatt("QC05","SEEN",1);
- gMC->Gsatt("QTD1","SEEN",1);
- gMC->Gsatt("QTD2","SEEN",1);
- gMC->Gsatt("QTD3","SEEN",1);
+ gMC->Gsatt("QC06","SEEN",1);
+ gMC->Gsatt("QC07","SEEN",1);
+ gMC->Gsatt("QC08","SEEN",1);
+ gMC->Gsatt("QC09","SEEN",1);
+ gMC->Gsatt("QC10","SEEN",1);
gMC->Gsatt("MQXL","SEEN",1);
gMC->Gsatt("YMQL","SEEN",1);
gMC->Gsatt("MQX ","SEEN",1);
gMC->Gsatt("ZEV1","SEEN",0);
gMC->Gsatt("ZES0","SEEN",0);
gMC->Gsatt("ZES1","SEEN",0);
-
//
gMC->Gdopt("hide", "on");
gMC->Gdopt("shad", "on");
// Routine called at every step in the Zero Degree Calorimeters
//
Int_t j, vol[2]={0,0}, ibeta=0, ialfa=0, ibe=0, nphe=0;
- Float_t hits[11], x[3], xdet[3], um[3], ud[3];
+ Float_t hits[12], x[3], xdet[3], um[3], ud[3];
Float_t m=0., ekin=0., destep=0., be=0., out=0.;
// Parametrization for light guide uniformity
// NEW!!! Light guide tilted @ 51 degrees
Double_t s[3], p[3];
const char *knamed;
//
- for(j=0;j<11;j++) hits[j]=-999.;
+ for(j=0;j<12;j++) hits[j]=-999.;
//
// --- This part is for no shower developement in beam pipe and TDI
// If particle interacts with beam pipe or TDI -> return
if(xdet[1]<=0.) vol[1]=2;
else vol[1]=4;
}
- if((vol[1]!=1) && (vol[1]!=2) && (vol[1]!=3) && (vol[1]!=4))
- printf("\n ZDC StepManager->ERROR in ZN!!! vol[1] = %d, xdet[0] = %f,"
- "xdet[1] = %f\n",vol[1], xdet[0], xdet[1]);
}
else if(vol[0]==2){ //Quadrant in ZPC
break;
}
}
- if((vol[1]!=1) && (vol[1]!=2) && (vol[1]!=3) && (vol[1]!=4))
- printf(" ZDC StepManager->ERROR in ZP!!! vol[1] = %d, xdet[0] = %f,"
- "xdet[1] = %f\n",vol[1], xdet[0], xdet[1]);
}
//
// Quadrant in ZEM: vol[1] = 1 -> particle in 1st ZEM (placed at x = 8.5 cm)
if(xdet[1]<=0.) vol[1]=2;
else vol[1]=4;
}
- if((vol[1]!=1) && (vol[1]!=2) && (vol[1]!=3) && (vol[1]!=4))
- printf("\n ZDC StepManager->ERROR in ZNA!!! vol[1] = %d, xdet[0] = %f,"
- "xdet[1] = %f\n",vol[1], xdet[0], xdet[1]);
}
//
else if(vol[0]==5){ //Quadrant in ZPA
break;
}
}
- if((vol[1]!=1) && (vol[1]!=2) && (vol[1]!=3) && (vol[1]!=4))
- printf(" ZDC StepManager->ERROR in ZPA!!! vol[1] = %d, xdet[0] = %f,"
- "xdet[1] = %f\n",vol[1], xdet[0], xdet[1]);
}
+ if((vol[1]!=1) && (vol[1]!=2) && (vol[1]!=3) && (vol[1]!=4))
+ AliError(Form("AliZDCv3 -> WRONG tower for det %d: tow %d with xdet=(%f, %f)\n",
+ vol[0], vol[1], xdet[0], xdet[1]));
+ // Ch. debug
+ //printf("\t *** det %d vol %d xdet(%f, %f)\n",vol[0], vol[1], xdet[0], xdet[1]);
// Store impact point and kinetic energy of the ENTERING particle
//Particle energy
gMC->TrackMomentum(p[0],p[1],p[2],p[3]);
hits[3] = p[3];
- // Impact point on ZDC
- hits[4] = xdet[0];
+ // Impact point on ZDC
+ // X takes into account the LHC x-axis sign
+ // which is opposite to positive x on detcetor front face
+ // for side A detectors (ZNA and ZPA)
+ if(vol[0]==4 || vol[0]==5) hits[4] = -xdet[0];
+ else hits[4] = xdet[0];
hits[5] = xdet[1];
hits[6] = 0;
hits[7] = 0;
TParticle *part = (gAlice->GetMCApp())->Particle(curTrackN);
hits[10] = part->GetPdgCode();
//printf("\t PDGCode = %d\n", part->GetPdgCode());
+ //
+ hits[11] = 1.0e09*gMC->TrackTime();
+ //printf("\t TrackTime = %f\n", hits[11]);
AddHit(curTrackN, vol, hits);
//knamed, vol[0], vol[1], x[0], x[1], x[2]);
if(vol[0]==1){
fnDetectedC += 1;
- printf("\n # of particles in ZNC = %d\n\n",fnDetectedC);
+ printf(" # of particles in ZNC = %d\n\n",fnDetectedC);
}
else if(vol[0]==2){
fpDetectedC += 1;
- printf("\n # of particles in ZPC = %d\n\n",fpDetectedC);
+ printf(" # of particles in ZPC = %d\n\n",fpDetectedC);
}
else if(vol[0]==4){
fnDetectedA += 1;
- printf("\n # of particles in ZNA = %d\n\n",fnDetectedA);
+ printf(" # of particles in ZNA = %d\n\n",fnDetectedA);
}
else if(vol[0]==5){
fpDetectedA += 1;
- printf("\n # of particles in ZPA = %d\n\n",fpDetectedA);
+ printf(" # of particles in ZPA = %d\n\n",fpDetectedA);
}
//
//printf("\t Particle: mass = %1.3f, E = %1.3f GeV, pz = %1.2f GeV -> stopped in volume %s\n",
// NB-> fPosZEM[2]+fZEMLength = -1000.+2*10.3 = 979.69 cm
Float_t z = -xalic[2]+fPosZEM[2]+2*fZEMLength-xalic[1];
//z = xalic[2]-fPosZEM[2]-fZEMLength-xalic[1]*(TMath::Tan(45.*kDegrad));
- //printf("\n fPosZEM[2]+2*fZEMLength = %f", fPosZEM[2]+2*fZEMLength);
+ //printf(" fPosZEM[2]+2*fZEMLength = %f", fPosZEM[2]+2*fZEMLength);
Float_t guiEff = guiPar[0]*(guiPar[1]*z*z+guiPar[2]*z+guiPar[3]);
out = out*guiEff;
nphe = gRandom->Poisson(out);
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff