// No. of ZDC cabled ch.
int const kNChannels = 24;
int const kNScChannels = 32;
+ Int_t kFirstADCGeo=0, kLastADCGeo=3;
+
+ Int_t ich=0;
+ Int_t adcMod[2*kNChannels], adcCh[2*kNChannels], sigCode[2*kNChannels];
+ Int_t det[2*kNChannels], sec[2*kNChannels];
+ for(Int_t y=0; y<2*kNChannels; y++){
+ adcMod[y]=adcCh[y]=sigCode[y]=det[y]=sec[y]=0;
+ }
/* log start of process */
printf("ZDC EMD program started\n");
for(int ii=0; ii<2; ii++){
fscanf(filePed,"%f",&readValues[ii][jj]);
}
- if(jj<kNChannels && jj<2*kNChannels){
+ if(jj<2*kNChannels){
MeanPed[jj] = readValues[0][jj];
- //printf("\t MeanPedhg[%d] = %1.1f\n",jj, MeanPedhg[jj]);
+ printf("\t MeanPed[%d] = %1.1f\n",jj, MeanPed[jj]);
}
- else if(jj>2*kNChannels && jj>4*kNChannels){
+ else if(jj>2*kNChannels){
CorrCoeff0[jj-4*kNChannels] = readValues[0][jj];
CorrCoeff1[jj-4*kNChannels] = readValues[1][jj];;
}
/* use event - here, just write event id to result file */
eventT=event->eventType;
- Int_t ich=0;
- Int_t adcMod[2*kNChannels], adcCh[2*kNChannels], sigCode[2*kNChannels];
- Int_t det[2*kNChannels], sec[2*kNChannels];
- for(Int_t y=0; y<2*kNChannels; y++){
- adcMod[y]=adcCh[y]=sigCode[y]=det[y]=sec[y]=0;
- }
-
Int_t iScCh=0;
Int_t scMod[kNScChannels], scCh[kNScChannels], scSigCode[kNScChannels];
Int_t scDet[kNScChannels], scSec[kNScChannels];
Int_t quad = rawStreamZDC->GetSector(1);
if(rawStreamZDC->IsADCDataWord() && !(rawStreamZDC->IsUnderflow())
- && !(rawStreamZDC->IsOverflow()) && det!=-1
- && (rawStreamZDC->GetADCGain() == 1)){ // Selecting LOW RES ch.s
-
- //printf(" IsADCWord %d, IsUnderflow %d, IsOverflow %d\n",
- // rawStreamZDC->IsADCDataWord(),rawStreamZDC->IsUnderflow(),rawStreamZDC->IsOverflow());
+ && !(rawStreamZDC->IsOverflow()) && det!=-1 && det!=3
+ && (rawStreamZDC->GetADCGain() == 1 && // Selecting LOW RES ch.s
+ rawStreamZDC->GetADCModule()>=kFirstADCGeo && rawStreamZDC->GetADCModule()<=kLastADCGeo)){
// Taking LOW RES channels -> ch.+kNChannels !!!!
Int_t DetIndex=999, PedIndex=999;
- // Not ZEM not PMRef && low gain chain
- if((det!=3) && (quad!=5) && (rawStreamZDC->GetADCGain()==1)){
+ // Not PMRef
+ if(quad!=5){
if(det == 1){
DetIndex = det-1;
PedIndex = quad+kNChannels;
ZDCCorrADC[DetIndex] = (rawStreamZDC->GetADCValue()) - Pedestal;
ZDCCorrADCSum[DetIndex] += ZDCCorrADC[DetIndex];
//
- /*printf("\t det %d quad %d res %d pedInd %d detInd %d:"
- "ADCCorr = %d, ZDCCorrADCSum = %d\n",
- det,quad,rawStreamZDC->GetADCGain(),PedIndex,DetIndex,
- (Int_t) ZDCCorrADC[DetIndex],(Int_t) ZDCCorrADCSum[DetIndex]);
- */
+ /*printf("\t det %d quad %d res %d pedInd %d "
+ "Pedestal %1.0f -> ADCCorr = %d ZDCCorrADCSum = %d\n",
+ det,quad,rawStreamZDC->GetADCGain(),PedIndex,Pedestal,
+ (Int_t) ZDCCorrADC[DetIndex],(Int_t) ZDCCorrADCSum[DetIndex]);*/
+
}
- // Not common nor ref. PM && low gain chain
- if((quad!=0) && (rawStreamZDC->GetADCGain()==1)){
+ // Not common PM
+ if(quad!=0){
Float_t corrADCval = (rawStreamZDC->GetADCValue()) - Pedestal;
- if(det==1) histZNCtow[quad]->Fill(corrADCval);
- else if(det==2) histZPCtow[quad]->Fill(corrADCval);
- else if(det==4) histZNAtow[quad]->Fill(corrADCval);
- else if(det==5) histZPAtow[quad]->Fill(corrADCval);
+ if(det==1) histZNCtow[quad-1]->Fill(corrADCval);
+ else if(det==2) histZPCtow[quad-1]->Fill(corrADCval);
+ else if(det==4) histZNAtow[quad-1]->Fill(corrADCval);
+ else if(det==5) histZPAtow[quad-1]->Fill(corrADCval);
+ //
+ //printf("\t det %d tow %d fill histo w. value %1.0f\n",
+ // det,quad,corrADCval);
}
if(DetIndex==999 || PedIndex==999)
- printf(" WARNING! Detector a/o pedestal index are WRONG!!!\n");
+ printf(" WARNING! Detector a/o pedestal index are WRONG!!!\n");
- }
+ }//quad!=5
}//IsADCDataWord()
}
//
nevents_physics++;
//
+ delete reader;
+ delete rawStreamZDC;
+ //
for(Int_t j=0; j<4; j++){
histoEMDRaw[j]->Fill(ZDCRawADC[j]);
histoEMDCorr[j]->Fill(ZDCCorrADCSum[j]);
}
}//(if PHYSICS_EVENT)
+
+ /* exit when last event received, no need to wait for TERM signal */
+ else if(eventT==END_OF_RUN) {
+ printf(" -> EOR event detected\n");
+ break;
+ }
nevents_total++;
//
FILE *fileShuttle1 = fopen(ENCALIBDATA_FILE,"w");
//
- Int_t BinMax[4];
- Float_t YMax[4];
- Int_t NBinsx[4];
- Float_t MeanFitVal[4];
+ Int_t BinMax[4]={0,0,0,0};
+ Float_t YMax[4]={0.,0.,0.,0.};
+ Int_t NBinsx[4]={0,0,0,0};
+ Float_t MeanFitVal[4]={0.,0.,0.,0.};
TF1 *fitfun[4];
for(Int_t k=0; k<4; k++){
if(histoEMDCorr[k]->GetEntries() == 0){
printf("\n WARNING! Empty histos -> ending DA WITHOUT writing output\n\n");
return -1;
}
+ //
BinMax[k] = histoEMDCorr[k]->GetMaximumBin();
+ if(BinMax[k]<=6){
+ printf("\n WARNING! Something wrong with det %d histo -> ending DA WITHOUT writing output\n\n", k);
+ return -1;
+ }
+ //
YMax[k] = (histoEMDCorr[k]->GetXaxis())->GetXmax();
NBinsx[k] = (histoEMDCorr[k]->GetXaxis())->GetNbins();
-// printf("\n\t Det%d -> BinMax = %d, ChXMax = %f\n", k+1, BinMax[k], BinMax[k]*YMax[k]/NBinsx[k]);
+ //printf("\n\t Det%d -> BinMax = %d, ChXMax = %f\n", k+1, BinMax[k], BinMax[k]*YMax[k]/NBinsx[k]);
histoEMDCorr[k]->Fit("gaus","Q","",BinMax[k]*YMax[k]/NBinsx[k]*0.7,BinMax[k]*YMax[k]/NBinsx[k]*1.25);
fitfun[k] = histoEMDCorr[k]->GetFunction("gaus");
MeanFitVal[k] = (Float_t) (fitfun[k]->GetParameter(1));
}
//
Float_t CalibCoeff[6];
- //Float_t icoeff[5];
//
for(Int_t j=0; j<6; j++){
if(j<4){
fclose(fileShuttle1);
FILE *fileShuttle2 = fopen(TOWCALIBDATA_FILE,"w");
- Float_t meanvalznc[4], meanvalzpc[4], meanvalzna[4], meanvalzpa[4];
+ //Float_t meanvalznc[4], meanvalzpc[4], meanvalzna[4], meanvalzpa[4];
for(Int_t j=0; j<4; j++){
- if(histZNCtow[j]->GetEntries() == 0){
+ /*if(histZNCtow[j]->GetEntries() == 0){
printf("\n WARNING! Empty histos -> ending DA WITHOUT writing output\n\n");
return -1;
}
meanvalznc[j] = histZNCtow[j]->GetMean();
meanvalzpc[j] = histZPCtow[j]->GetMean();
meanvalzna[j] = histZNAtow[j]->GetMean();
- meanvalzpa[j] = histZPAtow[j]->GetMean();
+ meanvalzpa[j] = histZPAtow[j]->GetMean();*/
// Note -> For the moment the inter-calibration coeff. are set to 1
- /*for(Int_t k=0; k<4; k++){
- icoeff[k] = 1.;
- fprintf(fileShuttle2,"\t%f",icoeff[k]);
+ for(Int_t k=0; k<4; k++){
+ Float_t icoeff = 1.;
+ fprintf(fileShuttle2,"\t%f",icoeff);
if(k==4) fprintf(fileShuttle2,"\n");
- }*/
+ }
}
- if(meanvalznc[1]!=0 && meanvalznc[2]!=0 && meanvalznc[3]!=0 &&
+ //
+ /*if(meanvalznc[1]!=0 && meanvalznc[2]!=0 && meanvalznc[3]!=0 &&
meanvalzpc[1]!=0 && meanvalzpc[2]!=0 && meanvalzpc[3]!=0 &&
meanvalzna[1]!=0 && meanvalzna[2]!=0 && meanvalzna[3]!=0 &&
meanvalzpa[1]!=0 && meanvalzpa[2]!=0 && meanvalzpa[3]!=0){
else{
printf("\n Tower intercalib. coeff. CAN'T be calculated (some mean values are ZERO)!!!\n\n");
return -1;
- }
+ }*/
fclose(fileShuttle2);
for(Int_t ij=0; ij<4; ij++){
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff