#include "STEER/AliMagFMaps.h"
#include "STRUCT/AliBODY.h"
#include "STRUCT/AliMAG.h"
-#include "STRUCT/AliABSOv0.h"
-#include "STRUCT/AliDIPOv2.h"
-#include "STRUCT/AliHALL.h"
+#include "STRUCT/AliABSOv3.h"
+#include "STRUCT/AliDIPOv3.h"
+#include "STRUCT/AliHALLv3.h"
#include "STRUCT/AliFRAMEv2.h"
-#include "STRUCT/AliSHILv2.h"
-#include "STRUCT/AliPIPEv0.h"
-#include "ITS/AliITSvPPRasymmFMD.h"
+#include "STRUCT/AliSHILv3.h"
+#include "STRUCT/AliPIPEv3.h"
+#include "ITS/AliITSv11Hybrid.h"
#include "TPC/AliTPCv2.h"
-#include "TOF/AliTOFv4T0.h"
-#include "RICH/AliRICHv1.h"
-#include "ZDC/AliZDCv2.h"
+#include "TOF/AliTOFv6T0.h"
+#include "HMPID/AliHMPIDv3.h"
+#include "ZDC/AliZDCv3.h"
#include "TRD/AliTRDv1.h"
#include "FMD/AliFMDv1.h"
#include "MUON/AliMUONv1.h"
-#include "MUON/AliMUONSt1GeometryBuilderV2.h"
-#include "MUON/AliMUONSt2GeometryBuilderV2.h"
-#include "MUON/AliMUONSlatGeometryBuilder.h"
-#include "MUON/AliMUONTriggerGeometryBuilder.h"
#include "PHOS/AliPHOSv1.h"
#include "PMD/AliPMDv1.h"
-#include "START/AliSTARTv1.h"
+#include "T0/AliT0v1.h"
#include "EMCAL/AliEMCALv2.h"
-#include "CRT/AliCRTv0.h"
-#include "VZERO/AliVZEROv5.h"
+#include "ACORDE/AliACORDEv0.h"
+#include "VZERO/AliVZEROv7.h"
#endif
enum PprRun_t
"kFlow_2_2000", "kFlow_10_2000", "kFlow_6_2000", "kFlow_6_5000", "kHIJINGplus"
};
-enum PprGeo_t
-{
- kHoles, kNoHoles
-};
-
enum PprRad_t
{
kGluonRadiation, kNoGluonRadiation
k2kG, k4kG, k5kG
};
+enum PprTrigConf_t
+{
+ kDefaultPPTrig, kDefaultPbPbTrig
+};
+
+const char * pprTrigConfName[] = {
+ "p-p","Pb-Pb"
+};
+
+enum PprGeo_t
+ {
+ kHoles, kNoHoles
+ };
// This part for configuration
//static PprRun_t srun = test50;
-static PprRun_t srun = kHIJINGplus;
-static PprGeo_t sgeo = kNoHoles;
-static PprRad_t srad = kGluonRadiation;
-static PprMag_t smag = k5kG;
+static PprRun_t srun = kHIJINGplus;
+static PprRad_t srad = kGluonRadiation;
+static PprMag_t smag = k5kG;
+static PprGeo_t geo = kHoles;
static Int_t sseed = 12345; //Set 0 to use the current time
+//static PprTrigConf_t strig = kDefaultPPTrig; // default pp trigger configuration
+static PprTrigConf_t strig = kDefaultPbPbTrig; // default PbPb trigger configuration
// Comment line
static TString comment;
AliGenHijing* HijingStandard();
AliGenGeVSim* GeVSimStandard(Float_t, Float_t);
void ProcessEnvironmentVars();
+void LoadPythia();
void Config()
{
gRandom->SetSeed(sseed);
cout<<"Seed for random number generation= "<<gRandom->GetSeed()<<endl;
-
- // libraries required by geant321
+ // Load Pythia libraries
+ LoadPythia();
+
+ // libraries required by geant321
#if defined(__CINT__)
gSystem->Load("libgeant321");
#endif
new TGeant3TGeo("C++ Interface to Geant3");
+ if(!AliCDBManager::Instance()->IsDefaultStorageSet()){
+ AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT");
+ AliCDBManager::Instance()->SetRun(0);
+ }
+
AliRunLoader* rl=0x0;
- cout<<"Config.C: Creating Run Loader ..."<<endl;
+ AliLog::Message(AliLog::kInfo, "Creating Run Loader", "", "", "Config()"," ConfigPPR.C", __LINE__);
+
rl = AliRunLoader::Open("galice.root",
AliConfig::GetDefaultEventFolderName(),
"recreate");
rl->SetCompressionLevel(2);
rl->SetNumberOfEventsPerFile(3);
gAlice->SetRunLoader(rl);
+ // gAlice->SetGeometryFromFile("geometry.root");
+ // gAlice->SetGeometryFromCDB();
+
+ // Set the trigger configuration
+ gAlice->SetTriggerDescriptor(pprTrigConfName[strig]);
+ cout<<"Trigger configuration is set to "<<pprTrigConfName[strig]<<endl;
//
// Set External decayer
comment = comment.Append(" | Gluon Radiation Off");
}
- if (sgeo == kHoles)
- {
- comment = comment.Append(" | Holes for PHOS/RICH");
-
- } else {
- comment = comment.Append(" | No holes for PHOS/RICH");
- }
-
printf("\n \n Comment: %s \n \n", comment.Data());
Int_t iPHOS = 1;
Int_t iPIPE = 1;
Int_t iPMD = 1;
- Int_t iRICH = 1;
+ Int_t iHMPID = 1;
Int_t iSHIL = 1;
- Int_t iSTART = 1;
+ Int_t iT0 = 1;
Int_t iTOF = 1;
Int_t iTPC = 1;
Int_t iTRD = 1;
Int_t iZDC = 1;
Int_t iEMCAL = 1;
Int_t iVZERO = 1;
- Int_t iCRT = 0;
+ Int_t iACORDE = 0;
//=================== Alice BODY parameters =============================
AliBODY *BODY = new AliBODY("BODY", "Alice envelop");
if (iABSO)
{
//=================== ABSO parameters ============================
- AliABSO *ABSO = new AliABSOv0("ABSO", "Muon Absorber");
+ AliABSO *ABSO = new AliABSOv3("ABSO", "Muon Absorber");
}
if (iDIPO)
{
//=================== DIPO parameters ============================
- AliDIPO *DIPO = new AliDIPOv2("DIPO", "Dipole version 2");
+ AliDIPO *DIPO = new AliDIPOv3("DIPO", "Dipole version 3");
}
if (iHALL)
{
//=================== HALL parameters ============================
- AliHALL *HALL = new AliHALL("HALL", "Alice Hall");
+ AliHALL *HALL = new AliHALLv3("HALL", "Alice Hall");
}
//=================== FRAME parameters ============================
AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
- if (sgeo == kHoles) {
- FRAME->SetHoles(1);
+ if (geo == kHoles) {
+ FRAME->SetHoles(1);
} else {
- FRAME->SetHoles(0);
+ FRAME->SetHoles(0);
}
}
{
//=================== SHIL parameters ============================
- AliSHIL *SHIL = new AliSHILv2("SHIL", "Shielding Version 2");
+ AliSHIL *SHIL = new AliSHILv3("SHIL", "Shielding Version 3");
}
{
//=================== PIPE parameters ============================
- AliPIPE *PIPE = new AliPIPEv0("PIPE", "Beam Pipe");
+ AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
}
- if(iITS) {
+ if (iITS)
+ {
+ //=================== ITS parameters ============================
- //=================== ITS parameters ============================
- //
- // As the innermost detector in ALICE, the Inner Tracking System "impacts" on
- // almost all other detectors. This involves the fact that the ITS geometry
- // still has several options to be followed in parallel in order to determine
- // the best set-up which minimizes the induced background. All the geometries
- // available to date are described in the following. Read carefully the comments
- // and use the default version (the only one uncommented) unless you are making
- // comparisons and you know what you are doing. In this case just uncomment the
- // ITS geometry you want to use and run Aliroot.
- //
- // Detailed geometries:
- //
- //
- //AliITS *ITS = new AliITSv5symm("ITS","Updated ITS TDR detailed version with symmetric services");
- //
- //AliITS *ITS = new AliITSv5asymm("ITS","Updates ITS TDR detailed version with asymmetric services");
- //
- AliITSvPPRasymmFMD *ITS = new AliITSvPPRasymmFMD("ITS","New ITS PPR detailed version with asymmetric services");
- ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
- ITS->SetReadDet(kTRUE); // don't touch this parameter if you're not an ITS developer
- // ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det"); // don't touch this parameter if you're not an ITS developer
- ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
- ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
- ITS->SetThicknessChip1(200.); // chip thickness on layer 1 must be in the range [150,300]
- ITS->SetThicknessChip2(200.); // chip thickness on layer 2 must be in the range [150,300]
- ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
- ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
-
- // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful
- // for reconstruction !):
- //
- //
- //AliITSvPPRcoarseasymm *ITS = new AliITSvPPRcoarseasymm("ITS","New ITS PPR coarse version with asymmetric services");
- //ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
- //ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
- //
- //AliITS *ITS = new AliITSvPPRcoarsesymm("ITS","New ITS PPR coarse version with symmetric services");
- //ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
- //ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
- //
- //
- //
- // Geant3 <-> EUCLID conversion
- // ============================
- //
- // SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and
- // media to two ASCII files (called by default ITSgeometry.euc and
- // ITSgeometry.tme) in a format understandable to the CAD system EUCLID.
- // The default (=0) means that you dont want to use this facility.
- //
- ITS->SetEUCLID(0);
+ AliITS *ITS = new AliITSv11Hybrid("ITS","ITS v11Hybrid");
}
if (iTPC)
{
- //============================ TPC parameters ================================
- // --- This allows the user to specify sectors for the SLOW (TPC geometry 2)
- // --- Simulator. SecAL (SecAU) <0 means that ALL lower (upper)
- // --- sectors are specified, any value other than that requires at least one
- // --- sector (lower or upper)to be specified!
- // --- Reminder: sectors 1-24 are lower sectors (1-12 -> z>0, 13-24 -> z<0)
- // --- sectors 25-72 are the upper ones (25-48 -> z>0, 49-72 -> z<0)
- // --- SecLows - number of lower sectors specified (up to 6)
- // --- SecUps - number of upper sectors specified (up to 12)
- // --- Sens - sensitive strips for the Slow Simulator !!!
- // --- This does NOT work if all S or L-sectors are specified, i.e.
- // --- if SecAL or SecAU < 0
- //
- //
- //-----------------------------------------------------------------------------
-
- // gROOT->LoadMacro("SetTPCParam.C");
- // AliTPCParam *param = SetTPCParam();
+ //============================ TPC parameters =====================
AliTPC *TPC = new AliTPCv2("TPC", "Default");
-
- // All sectors included
- TPC->SetSecAL(-1);
- TPC->SetSecAU(-1);
-
}
if (iTOF) {
//=================== TOF parameters ============================
- AliTOF *TOF = new AliTOFv4T0("TOF", "normal TOF");
+ AliTOF *TOF = new AliTOFv6T0("TOF", "normal TOF");
}
- if (iRICH)
+ if (iHMPID)
{
- //=================== RICH parameters ===========================
- AliRICH *RICH = new AliRICHv1("RICH", "normal RICH");
+ //=================== HMPID parameters ===========================
+ AliHMPID *HMPID = new AliHMPIDv3("HMPID", "normal HMPID");
}
{
//=================== ZDC parameters ============================
- AliZDC *ZDC = new AliZDCv2("ZDC", "normal ZDC");
+ AliZDC *ZDC = new AliZDCv3("ZDC", "normal ZDC");
}
if (iTRD)
//=================== TRD parameters ============================
AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
-
- // Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2)
- TRD->SetGasMix(1);
- if (sgeo == kHoles) {
- // With hole in front of PHOS
- TRD->SetPHOShole();
- // With hole in front of RICH
- TRD->SetRICHhole();
- }
- // Switch on TR
- AliTRDsim *TRDsim = TRD->CreateTR();
}
if (iFMD)
//=================== MUON parameters ===========================
// New MUONv1 version (geometry defined via builders)
AliMUON *MUON = new AliMUONv1("MUON", "default");
- ((AliMUONv1*)MUON)->SetStepManagerVersionDE(true);
- MUON->AddGeometryBuilder(new AliMUONSt1GeometryBuilderV2(MUON));
- MUON->AddGeometryBuilder(new AliMUONSt2GeometryBuilderV2(MUON));
- MUON->AddGeometryBuilder(new AliMUONSlatGeometryBuilder(MUON));
- MUON->AddGeometryBuilder(new AliMUONTriggerGeometryBuilder(MUON));
}
//=================== PHOS parameters ===========================
AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
}
- if (iSTART)
+ if (iT0)
{
- //=================== START parameters ============================
- AliSTART *START = new AliSTARTv1("START", "START Detector");
+ //=================== T0 parameters ============================
+ AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
}
if (iEMCAL)
{
//=================== EMCAL parameters ============================
- AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "SHISH");
+ AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "SHISH_77_TRD1_2X2_FINAL_110DEG");
}
- if (iCRT)
+ if (iACORDE)
{
- //=================== CRT parameters ============================
- AliCRT *CRT = new AliCRTv0("CRT", "normal ACORDE");
+ //=================== ACORDE parameters ============================
+ AliACORDE *ACORDE = new AliACORDEv0("ACORDE", "normal ACORDE");
}
if (iVZERO)
{
- //=================== CRT parameters ============================
- AliVZERO *VZERO = new AliVZEROv5("VZERO", "normal VZERO");
+ //=================== VZERO parameters ============================
+ AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
}
gener->SetMuonPtCut(0.8);
gener->SetMuonThetaCut(171.,178.);
gener->SetMuonMultiplicity(2);
- gener->SetImpactParameterRange(12.,16.); //Centrality class Cent1 for PDC04
+ gener->SetImpactParameterRange(0.,5.); //Centrality class Cent1 for PDC04
gGener=gener;
}
break;
sseed = atoi(gSystem->Getenv("CONFIG_SEED"));
}
}
+
+
+void LoadPythia()
+{
+ // Load Pythia related libraries
+ gSystem->Load("liblhapdf.so"); // Parton density functions
+ gSystem->Load("libEGPythia6.so"); // TGenerator interface
+ gSystem->Load("libpythia6.so"); // Pythia
+ gSystem->Load("libAliPythia6.so"); // ALICE specific implementations
+}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff