-enum gentype_t {hijing, gun, box, pythia, param, cocktail, fluka, halo, ntuple, scan};
-
-gentype_t gentype=param;
+enum gentype_t {hijing, hijingParam, gun, box, pythia,
+ param1, param2, param3, param4,
+ cocktail, fluka, halo, ntuple, scan, doublescan};
+gentype_t gentype=param4;
ntracks=1;
rootfile->SetCompressionLevel(2);
TGeant3 *geant3 = (TGeant3*)gMC;
+//
+// Set External decayer
+ AliDecayer* decayer = new AliDecayerPythia();
+ decayer->SetForceDecay(kAll);
+ decayer->Init();
+ gMC->SetExternalDecayer(decayer);
+
//=======================================================================
// ******* GEANT STEERING parameters FOR ALICE SIMULATION *******
geant3->SetTRIG(1); //Number of events to be processed
gener->SetRange(20, -100, 100, 20, -100, 100, 1, 500, 500);
break;
- case hijing:
+ case hijingParam:
AliGenHIJINGpara *gener = new AliGenHIJINGpara(ntracks);
gener->SetMomentumRange(0,999);
gener->SetPhiRange(0,360);
gener->SetOrigin(0,0,0); //vertex position
gener->SetSigma(0,0,0); //Sigma in (X,Y,Z) (cm) on IP position
break;
-
+ case hijing:
+ AliGenHijing *gener = new AliGenHijing(-1);
+// centre of mass energy
+ gener->SetEnergyCMS(5500);
+// reference frame
+ gener->SetReferenceFrame("CMS ");
+// projectile
+ gener->SetProjectile("A ", 208, 82);
+ gener->SetTarget ("A ", 208, 82);
+// impact parameter range
+ gener->SetImpactParameterRange(0, 3.);
+// evaluate cross section before run
+ gener->SetEvaluate(1);
+// tell hijing to keep the full parent child chain
+ gener->KeepFullEvent();
+// enable jet quenching
+ gener->SetJetQuenching(1);
+// enable shadowing
+ gener->SetShadowing(1);
+// neutral pion and heavy particle decays switched off
+ gener->SetDecaysOff(1);
+// trigger
+ gener->SetTrigger(0);
+// kinematic selection
+ gener->SetSelectAll(0);
+// momentum range
+ gener->SetMomentumRange(0,999);
+// phi range
+ gener->SetPhiRange(-180,180);
+// theta range
+ gener->SetThetaRange(0,180.);
+// select flavor (0: no, 4: charm+beauty, 5:beauty)
+ gener->SetFlavor(4);
+//
+ gener->SetOrigin(0., 0.0 ,0);
+ gener->SetSigma(0,0,5.3);
+ gener->SetVertexSmear(kPerEvent);
+// no tracking
+ gener->SetTrackingFlag(0);
+ break;
+
case pythia:
//********************************************
// Example for Charm Production with Pythia *
//********************************************
-
- AliGenPythia *gener = new AliGenPythia(ntracks);
+ AliGenPythia *gener = new AliGenPythia(-1);
+// final state kinematic cuts
gener->SetMomentumRange(0,999);
- gener->SetPhiRange(0,360);
+ gener->SetPhiRange(-180,180);
gener->SetThetaRange(0., 180.);
gener->SetYRange(-10,10);
gener->SetPtRange(0,100);
- gener->SetOrigin(0,0,0); // vertex position
- gener->SetVertexSmear(perEvent);
- gener->SetSigma(0,0,5.6); // Sigma in (X,Y,Z) (cm) on IP position
-// gener->SetStrucFunc(DO_Set_1);
- gener->SetProcess(mb);
+// vertex position and smearing
+ gener->SetOrigin(0,0,0); // vertex position
+ gener->SetVertexSmear(kPerEvent);
+ gener->SetSigma(0,0,5.6); // Sigma in (X,Y,Z) (cm) on IP position
+// Structure function
+// DO_Set_1
+// GRV_LO
+// GRV_HO
+// MRS_D_minus
+// MRS_D0
+// MRS_G
+// CTEQ_2pM
+// CTEQ_4M
+ gener->SetStrucFunc(kGRV_HO);
+// Select corection for nuclear structure functions
+// gener->SetNuclei(208,208);
+//
+// Process type
+// charm, beauty, charm_unforced, beauty_unforced, jpsi, jpsi_chi, mb
+ gener->SetProcess(kPyBeauty);
+//
+// Pt transfer of the hard scattering
+ gener->SetPtHard(0.,5.);
+// Decay type (semielectronic, semimuonic, nodecay)
+ gener->SetForceDecay(kSemiElectronic);
+// Centre of mass energy
gener->SetEnergyCMS(5500.);
- break;
-
- case param:
+// No Tracking
+ gener->SetTrackingFlag(0);
+ break;
+
+ case param1:
//*******************************************************
-// Example for J/psi Production from Parameterisation *
+// Example for J/psi Production from Parameterisation
+// using default library (AliMUONlib)
//*******************************************************
- AliGenParam *gener = new AliGenParam(ntracks, upsilon_p);
+ AliGenParam *gener =
+ new AliGenParam(ntracks, AliGenMUONlib::kUpsilon);
gener->SetMomentumRange(0,999);
- gener->SetPhiRange(0,360);
+ gener->SetPtRange(0,999);
+ gener->SetPhiRange(-180, 180);
gener->SetYRange(2.5,4);
- gener->SetThetaRange(2,9);
-
- gener->SetPtRange(0,10);
+ gener->SetCutOnChild(1);
+ gener->SetChildThetaRange(2,9);
gener->SetOrigin(0,0,0); //vertex position
- gener->SetSigma(0,0,0);//Sigma in (X,Y,Z) (cm) on IP position
- gener->ForceDecay(dimuon);
+ gener->SetSigma(0,0,5.3); //Sigma in (X,Y,Z) (cm) on IP position
+ gener->SetForceDecay(kDiMuon);
+ gener->SetTrackingFlag(0);
+ break;
+
+ case param2:
+//*******************************************************
+// Example for Omega Production from Parameterisation
+// specifying library.
+//*******************************************************
+ AliGenParam *gener = new AliGenParam(1000,new AliGenPHOSlib(),
+ AliGenPHOSlib::kOmega);
+ gener->SetWeighting(kNonAnalog);
+ gener->SetForceDecay(kNoDecay);
+ gener->SetPtRange(0,100);
+ gener->SetThetaRange(45,135);
+ gener->SetTrackingFlag(0);
+ break;
+
+ case param3:
+//*******************************************************
+// Example for Upsilon Production from Parameterisation
+// specifying library.
+// GSI style
+//*******************************************************
+ AliGenParam *gener = new AliGenParam(1000,new AliGenGSIlib(),
+ AliGenGSIlib::kUpsilon, "MUON");
+ gener->SetMomentumRange(0,999);
+ gener->SetPtRange(0,999);
+ gener->SetPhiRange(-180, 180);
+ gener->SetYRange(2.5,4);
gener->SetCutOnChild(1);
+ gener->SetChildThetaRange(2,9);
+ gener->SetOrigin(0,0,0); //vertex position
+ gener->SetSigma(0,0,5.3); //Sigma in (X,Y,Z) (cm) on IP position
+ gener->SetForceDecay(kDiMuon);
+ gener->SetTrackingFlag(0);
+ break;
+
+ case param4:
+//*******************************************************
+// Example for Omega Production from Parameterisation
+// specifying library.
+// The alternative way.
+//*******************************************************
+ AliGenLib* Lib=new AliGenPHOSlib();
+ Int_t iOmega = AliGenPHOSlib::kOmega;
+ AliGenParam *gener = new AliGenParam(50, iOmega,
+ Lib->GetPt(iOmega, ""),
+ Lib->GetY (iOmega, ""),
+ Lib->GetIp(iOmega, ""));
+ gener->SetWeighting(kNonAnalog);
+ gener->SetForceDecay(kNoDecay);
+ gener->SetTrackingFlag(0);
break;
case fluka:
//*******************************************************
AliGenExtFile *gener = new AliGenExtFile(-1);
gener->SetFileName("$(ALICE_ROOT)/data/dtujet93.root");
- gener->SetVertexSmear(perEvent);
+ gener->SetVertexSmear(kPerEvent);
gener->SetTrackingFlag(1);
break;
gener->SetMomentumRange(0,999);
AliGenParam *jpsi = new AliGenParam(1,jpsi_p);
- jpsi->ForceDecay(dimuon);
+ jpsi->SetForceDecay(dimuon);
jpsi->SetCutOnChild(1);
// Activate this line if you want the vertex smearing to happen
// track by track
//
-// gener->SetVertexSmear(perTrack);
+// gener->SetVertexSmear(kPerTrack);
gener->Init();
gAlice->SetField(-999,2); //Specify maximum magnetic field in Tesla (neg. ==> default field)
Int_t iMAG=1;
-Int_t iITS=1;
-Int_t iTPC=1;
-Int_t iTOF=1;
-Int_t iRICH=1;
-Int_t iZDC=0;
-Int_t iCASTOR=1;
-Int_t iTRD=1;
-Int_t iABSO=1;
-Int_t iDIPO=1;
-Int_t iHALL=1;
-Int_t iFRAME=1;
-Int_t iSHIL=1;
-Int_t iPIPE=1;
-Int_t iFMD=1;
-Int_t iMUON=1;
-Int_t iPHOS=1;
-Int_t iPMD=1;
-Int_t iSTART=0;
//=================== Alice BODY parameters =============================
AliBODY *BODY = new AliBODY("BODY","Alice envelop");
// --- on the selected Magnet dimensions ---
AliMAG *MAG = new AliMAG("MAG","Magnet");
}
-
-
-if(iABSO) {
-//=================== ABSO parameters ============================
-AliABSO *ABSO = new AliABSO("ABSO","Muon Absorber");
-}
-
-if(iDIPO) {
-//=================== DIPO parameters ============================
-
-AliDIPO *DIPO = new AliDIPOv2("DIPO","Dipole version 2");
-}
-
-if(iHALL) {
-//=================== HALL parameters ============================
-
-AliHALL *HALL = new AliHALL("HALL","Alice Hall");
-}
-
-
-if(iFRAME) {
-//=================== FRAME parameters ============================
-
-AliFRAME *FRAME = new AliFRAMEv0("FRAME","Space Frame");
-}
-
-if(iSHIL) {
-//=================== SHIL parameters ============================
-
-AliSHIL *SHIL = new AliSHIL("SHIL","Shielding");
-}
-
-
-if(iPIPE) {
-//=================== PIPE parameters ============================
-
-AliPIPE *PIPE = new AliPIPEv0("PIPE","Beam Pipe");
-}
-
-
-if(iITS) {
-//=================== ITS parameters ============================
-//
-// EUCLID is a flag to output (=1) both geometry and media to two ASCII files
-// (called by default ITSgeometry.euc and ITSgeometry.tme) in a format
-// understandable to the CAD system EUCLID. The default (=0) means that you
-// dont want to use this facility.
-//
-AliITS *ITS = new AliITSv5("ITS","normal ITS");
-ITS->SetEUCLID(0);
-}
-
-if(iTPC) {
-//============================ TPC parameters ================================
-// --- This allows the user to specify sectors for the SLOW (TPC geometry 2)
-// --- Simulator. SecAL (SecAU) <0 means that ALL lower (upper)
-// --- sectors are specified, any value other than that requires at least one
-// --- sector (lower or upper)to be specified!
-// --- Reminder: sectors 1-24 are lower sectors (1-12 -> z>0, 13-24 -> z<0)
-// --- sectors 25-72 are the upper ones (25-48 -> z>0, 49-72 -> z<0)
-// --- SecLows - number of lower sectors specified (up to 6)
-// --- SecUps - number of upper sectors specified (up to 12)
-// --- Sens - sensitive strips for the Slow Simulator !!!
-// --- This does NOT work if all S or L-sectors are specified, i.e.
-// --- if SecAL or SecAU < 0
-//
-//
-//-----------------------------------------------------------------------------
-
-AliTPC *TPC = new AliTPCv2("TPC","Normal TPC");
-AliTPCD *paramd = TPC->GetDigParam();
-AliTPCParam *param = &(paramd->GetParam());
-
-// Set geometrical parameters
-
-param->SetSectorAngles(20.,0.,20.,0.);
-param->SetInnerRadiusLow(83.9);
-param->SetInnerRadiusUp(141.3);
-param->SetOuterRadiusLow(146.9);
-param->SetOuterRadiusUp(249.4);
-param->SetInSecLowEdge(81.6);
-param->SetInSecUpEdge(143.6);
-param->SetOuSecLowEdge(144.2);
-param->SetOuSecUpEdge(252.1);
-param->SetEdge(1.5);
-param->SetDeadZone(1.15);
-param->SetPadLength(2.0);
-param->SetPadWidth(0.3);
-param->SetPadPitchLength(2.05);
-param->SetPadPitchWidth(0.35);
-param->Update();
-
-if (TPC->IsVersion() != 2) paramd->Write("Param1");
-
-// set gas mixture
-
-TPC->SetGasMixt(2,20,10,-1,0.9,0.1,0.);
-TPC->SetSecAL(1);
-TPC->SetSecAU(1);
-TPC->SetSecLows(1, 2, 3, 1+18, 2+18, 3+18);
-TPC->SetSecUps(1+36, 2+36, 3+36, 1+38+18, 2+38+18, 3+38+18, -1,-1,-1,-1,-1,-1);
-TPC->SetSens(1);
-
-}
-
-if(iTOF) {
-//=================== TOF parameters ============================
-AliTOF *TOF = new AliTOFv2("TOF","normal TOF");
-}
-
-if(iRICH) {
-//=================== RICH parameters ===========================
-
- AliRICH *RICH = new AliRICHv0("RICH","normal RICH");
-
- RICH->SetSMAXAR(0.03);
- RICH->SetSMAXAL(-1);
-//
-// Version 0
-// Default Segmentation
- AliRICHsegmentationV0* RsegV0 = new AliRICHsegmentationV0;
- RsegV0->SetPADSIZ(.8, .8);
- RsegV0->SetDAnod(0.8/3);
-// Default response
- AliRICHresponseV0* Rresponse0 = new AliRICHresponseV0;
- AliRICHresponseCkv* RresponseCkv = new AliRICHresponseCkv;
-
-//------------------------Chambers 0-6 ----------------------------
- for (Int_t i=0; i<7; i++) {
- RICH->SetSegmentationModel(i, 1, RsegV0);
- RICH->SetResponseModel(i, mip , Rresponse0);
- RICH->SetResponseModel(i, cerenkov, RresponseCkv);
- RICH->Chamber(i).SetRSIGM(5.);
- RICH->Chamber(i).SetMUCHSP(43.);
- RICH->Chamber(i).SetMUSIGM(0.18, 0.18);
- RICH->Chamber(i).SetMAXADC( 1024);
- RICH->Chamber(i).SetSqrtKx3(0.77459667);
- RICH->Chamber(i).SetKx2(0.962);
- RICH->Chamber(i).SetKx4(0.379);
- RICH->Chamber(i).SetSqrtKy3(0.77459667);
- RICH->Chamber(i).SetKy2(0.962);
- RICH->Chamber(i).SetKy4(0.379);
- RICH->Chamber(i).SetPitch(0.25);
- RICH->SetNsec(i,1);
- }
-}
-
-if(iZDC) {
-//=================== ZDC parameters ============================
-
-AliZDC *ZDC = new AliZDCv1("ZDC","normal ZDC");
-}
-
-if(iCASTOR) {
-//=================== CASTOR parameters ============================
-
-AliCASTOR *CASTOR = new AliCASTORv1("CASTOR","normal CASTOR");
-}
-
-if(iTRD) {
-//=================== TRD parameters ============================
-
-AliTRD *TRD = new AliTRDv0("TRD","TRD version 0");
-// Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2)
-TRD->SetGasMix(0);
-TRD->SetHits(1);
-}
-
-if(iFMD) {
-//=================== FMD parameters ============================
-
-AliFMD *FMD = new AliFMDv1("FMD","normal FMD");
-}
-
-if(iMUON) {
-//=================== MUON parameters ===========================
-
-AliMUON *MUON = new AliMUONv0("MUON","normal MUON");
-
- MUON->SetMaxStepGas(0.1);
- MUON->SetMaxStepAlu(0.1);
-//
-// Version 0
-//
-// First define the number of planes that are segmented (1 or 2) by a call
-// to SetNsec.
-// Then chose for each chamber (chamber plane) the segmentation
-// and response model.
-// They should be equal for the two chambers of each station. In a future
-// version this will be enforced.
-//
-//
- Int_t chamber;
- Int_t station;
-// Default response
- AliMUONresponseV0* response0 = new AliMUONresponseV0;
- response0->SetSqrtKx3(0.7131);
- response0->SetKx2(1.0107);
- response0->SetKx4(0.4036);
- response0->SetSqrtKy3(0.7642);
- response0->SetKy2(0.9706);
- response0->SetKy4(0.3831);
- response0->SetPitch(0.25);
- response0->SetSigmaIntegration(10.);
- response0->SetChargeSlope(50);
- response0->SetChargeSpread(0.18, 0.18);
- response0->SetMaxAdc(4096);
-//--------------------------------------------------------
-// Configuration for Chamber TC1/2 (Station 1) ----------
-//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-// Float_t rseg1[4]={17.5, 55.2, 71.3, 95.5};
- Float_t rseg1[4]={15.5, 55.2, 71.3, 95.5};
- Int_t nseg1[4]={4, 4, 2, 1};
-//
- chamber=1;
-//^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
-//
- AliMUONsegmentationV01 *seg11=new AliMUONsegmentationV01;
-
- seg11->SetSegRadii(rseg1);
- seg11->SetPADSIZ(3, 0.5);
- seg11->SetDAnod(3.0/3./4);
- seg11->SetPadDivision(nseg1);
-
- MUON->SetSegmentationModel(chamber-1, 1, seg11);
-//
- AliMUONsegmentationV02 *seg12=new AliMUONsegmentationV02;
- seg12->SetSegRadii(rseg1);
- seg12->SetPADSIZ(0.75, 2.0);
- seg12->SetDAnod(3.0/3./4);
- seg12->SetPadDivision(nseg1);
-
- MUON->SetSegmentationModel(chamber-1, 2, seg12);
-
- MUON->SetResponseModel(chamber-1, response0);
-
- chamber=2;
-//^^^^^^^^^
-//
- MUON->SetNsec(chamber-1,2);
-//
- AliMUONsegmentationV01 *seg21=new AliMUONsegmentationV01;
- seg21->SetSegRadii(rseg1);
- seg21->SetPADSIZ(3, 0.5);
- seg21->SetDAnod(3.0/3./4);
- seg21->SetPadDivision(nseg1);
- MUON->SetSegmentationModel(chamber-1, 1, seg21);
-//
- AliMUONsegmentationV02 *seg22=new AliMUONsegmentationV02;
- seg22->SetSegRadii(rseg1);
- seg22->SetPADSIZ(0.75, 2.);
- seg22->SetDAnod(3.0/3./4);
- seg22->SetPadDivision(nseg1);
- MUON->SetSegmentationModel(chamber-1, 2, seg22);
-
- MUON->SetResponseModel(chamber-1, response0);
-//
-//--------------------------------------------------------
-// Configuration for Chamber TC3/4 -----------------------
-//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-// Float_t rseg2[4]={23.5, 47.1, 87.7, 122.5};
- Float_t rseg2[4]={21.5, 47.1, 87.7, 122.5};
- Int_t nseg2[4]={4, 4, 2, 1};
-//
- chamber=3;
-//^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
-//
- AliMUONsegmentationV01 *seg31=new AliMUONsegmentationV01;
- seg31->SetSegRadii(rseg2);
- seg31->SetPADSIZ(3, 0.5);
- seg31->SetDAnod(3.0/3./4);
- seg31->SetPadDivision(nseg2);
- MUON->SetSegmentationModel(chamber-1, 1, seg31);
-//
- AliMUONsegmentationV02 *seg32=new AliMUONsegmentationV02;
- seg32->SetSegRadii(rseg2);
- seg32->SetPADSIZ(0.75, 2.);
- seg32->SetPadDivision(nseg2);
- seg32->SetDAnod(3.0/3./4);
-
- MUON->SetSegmentationModel(chamber-1, 2, seg32);
-
- MUON->SetResponseModel(chamber-1, response0);
-
- chamber=4;
-//^^^^^^^^^
-//
- MUON->SetNsec(chamber-1,2);
-//
- AliMUONsegmentationV01 *seg41=new AliMUONsegmentationV01;
- seg41->SetSegRadii(rseg2);
- seg41->SetPADSIZ(3, 0.5);
- seg41->SetDAnod(3.0/3./4);
- seg41->SetPadDivision(nseg2);
- MUON->SetSegmentationModel(chamber-1, 1, seg41);
-//
- AliMUONsegmentationV02 *seg42=new AliMUONsegmentationV02;
- seg42->SetSegRadii(rseg2);
- seg42->SetPADSIZ(0.75, 2.);
- seg42->SetPadDivision(nseg2);
- seg42->SetDAnod(3.0/3./4);
-
- MUON->SetSegmentationModel(chamber-1, 2, seg42);
-
- MUON->SetResponseModel(chamber-1, response0);
-
-
-//--------------------------------------------------------
-// Configuration for Chamber TC5/6 -----------------------
-//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-/*
- seg5 = new AliMUONsegmentationV1;
- AliMUONresponseV0* response5 = new AliMUONresponseV0;
- // K3 = 0.62
- response5->SetSqrtKx3(0.78740079);
- response5->SetKx2(0.95237319); // 0.5 * kPI * (1- 0.5*sqrtky3 )
- response5->SetKx4(0.37480633); // 0.25/TMath::ATan(sqrtkx3)
- // K3 = 0.55
- response5->SetSqrtKy3(0.74161985);
- response5->SetKy2(0.98832946);
- response5->SetKy4(0.39177817);
- response5->SetPitch(0.325);
- response5->SetSigmaIntegration(10.);
- response5->SetChargeSlope(50);
- response5->SetChargeSpread(0.4, 0.4);
- response5->SetMaxAdc(4096);
-
- chamber=5;
- MUON->SetNsec(chamber-1,1);
- MUON->SetSegmentationModel(chamber-1, 1, seg5);
- MUON->SetResponseModel(chamber-1, response5);
-
- chamber=6;
- MUON->SetNsec(chamber-1,1);
- MUON->SetSegmentationModel(chamber-1, 1, seg5);
- MUON->SetResponseModel(chamber-1, response5);
-//
-// Station 3
- station=3;
- MUON->SetPADSIZ(station, 1, 0.975, 0.55);
-*/
-
- chamber=5;
-//^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
-//
- AliMUONsegmentationV0 *seg51=new AliMUONsegmentationV0;
- seg51->SetPADSIZ(0.75, 0.5);
- seg51->SetDAnod(3.0/3./4);
- MUON->SetSegmentationModel(chamber-1, 1, seg51);
-//
- AliMUONsegmentationV0 *seg52=new AliMUONsegmentationV0;
- seg52->SetPADSIZ(0.5,0.75);
- seg52->SetDAnod(3.0/3./4);
- MUON->SetSegmentationModel(chamber-1, 2, seg52);
-
- MUON->SetResponseModel(chamber-1, response0);
-
- chamber=6;
-//^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
-//
- AliMUONsegmentationV0 *seg61=new AliMUONsegmentationV0;
- seg61->SetPADSIZ(0.75, 0.5);
- seg61->SetDAnod(3.0/3./4);
- MUON->SetSegmentationModel(chamber-1, 1, seg61);
-//
- AliMUONsegmentationV0 *seg62=new AliMUONsegmentationV0;
- seg62->SetPADSIZ(0.5,0.75);
- seg62->SetDAnod(3.0/3./4);
- MUON->SetSegmentationModel(chamber-1, 2, seg62);
-
- MUON->SetResponseModel(chamber-1, response0);
-
-//--------------------------------------------------------
-// Configuration for Chamber TC7/8 (Station 4) ----------
-//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
- Int_t nseg4[4]={4, 4, 2, 1};
-
- chamber=7;
-//^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
-//
- AliMUONsegmentationV04 *seg71=new AliMUONsegmentationV04;
- seg71->SetPADSIZ(10.,0.5);
- seg71->SetDAnod(0.25);
- seg71->SetPadDivision(nseg4);
- MUON->SetSegmentationModel(chamber-1, 1, seg71);
-
- AliMUONsegmentationV05 *seg72=new AliMUONsegmentationV05;
- seg72->SetPADSIZ(1,10);
- seg72->SetDAnod(0.25);
- seg72->SetPadDivision(nseg4);
- MUON->SetSegmentationModel(chamber-1, 2, seg72);
-
- MUON->SetResponseModel(chamber-1, response0);
-
- chamber=8;
-//^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
- AliMUONsegmentationV04 *seg81=new AliMUONsegmentationV04;
- seg81->SetPADSIZ(10., 0.5);
- seg81->SetPadDivision(nseg4);
- seg81->SetDAnod(0.25);
- MUON->SetSegmentationModel(chamber-1, 1, seg81);
-
- AliMUONsegmentationV05 *seg82=new AliMUONsegmentationV05;
- seg82->SetPADSIZ(1, 10);
- seg82->SetPadDivision(nseg4);
- seg82->SetDAnod(0.25);
- MUON->SetSegmentationModel(chamber-1, 2, seg82);
-
- MUON->SetResponseModel(chamber-1, response0);
-//--------------------------------------------------------
-// Configuration for Chamber TC9/10 (Station 5) ---------
-//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- chamber=9;
-//^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
-//
- AliMUONsegmentationV04 *seg91=new AliMUONsegmentationV04;
- seg91->SetPADSIZ(10.,0.5);
- seg91->SetDAnod(0.25);
- seg91->SetPadDivision(nseg4);
- MUON->SetSegmentationModel(chamber-1, 1, seg91);
-
- AliMUONsegmentationV05 *seg92=new AliMUONsegmentationV05;
- seg92->SetPADSIZ(1,10);
- seg92->SetDAnod(0.25);
- seg92->SetPadDivision(nseg4);
-
- MUON->SetSegmentationModel(chamber-1, 2, seg92);
-
- MUON->SetResponseModel(chamber-1, response0);
-
- chamber=10;
-//^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
- AliMUONsegmentationV04 *seg101=new AliMUONsegmentationV04;
- seg101->SetPADSIZ(10., 0.5);
- seg101->SetPadDivision(nseg4);
- seg101->SetDAnod(0.25);
- MUON->SetSegmentationModel(chamber-1, 1, seg101);
-
- AliMUONsegmentationV05 *seg102=new AliMUONsegmentationV05;
- seg102->SetPADSIZ(1,10);
- seg102->SetPadDivision(nseg4);
- seg102->SetDAnod(0.25);
- MUON->SetSegmentationModel(chamber-1, 2, seg102);
-
- MUON->SetResponseModel(chamber-1, response0);
-//--------------------------------------------------------
-// Configuration for Trigger staions ---------------------
-// (not yet used/implemented) ----------------------------
-//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
- chamber=11;
- MUON->SetNsec(chamber-1,1);
- AliMUONsegmentationV0 *seg1112=new AliMUONsegmentationV0;
- seg1112->SetDAnod(0.51/3.);
-
- MUON->SetSegmentationModel(chamber-1, 1, seg1112);
- MUON->SetResponseModel(chamber-1, response0);
-
- chamber=12;
- MUON->SetNsec(chamber-1,1);
- MUON->SetSegmentationModel(chamber-1, 1, seg1112);
- MUON->SetResponseModel(chamber-1, response0);
-//
-// Trigger Station 1
- station=6;
- MUON->SetPADSIZ(station, 1, 0.75, 0.5);
-
- chamber=13;
- MUON->SetNsec(chamber-1,1);
- AliMUONsegmentationV0 *seg1314=new AliMUONsegmentationV0;
- seg1314->SetDAnod(0.51/3.);
-
- MUON->SetSegmentationModel(chamber-1, 1, seg1314);
- MUON->SetResponseModel(chamber-1, response0);
-
- chamber=14;
- MUON->SetNsec(chamber-1,1);
- MUON->SetSegmentationModel(chamber-1, 1, seg1314);
- MUON->SetResponseModel(chamber-1, response0);
-//
-// Trigger Station 2
- station=7;
- MUON->SetPADSIZ(station, 1, 0.75, 0.5);
-}
-
-if(iPHOS) {
- AliPHOS *PHOS = new AliPHOSv0("PHOS","GPS2");
-}
-
-if(iPMD) {
-//=================== PMD parameters ============================
-
-AliPMD *PMD = new AliPMDv0("PMD","normal PMD");
-PMD->SetPAR(1., 1., 0.8, 0.02);
-PMD->SetIN(6., 18., -580., 27., 27.);
-PMD->SetGEO(0.0, 0.2, 4.);
-PMD->SetPadSize(0.8, 1.0, 1.0, 1.5);
-
-}
-
-if(iSTART) {
-//=================== START parameters ============================
-AliSTART *START = new AliSTARTv0("START","START Detector");
-}
-
}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff