#include "EVGEN/AliGenGeVSim.h"
#include "EVGEN/AliGeVSimParticle.h"
#include "PYTHIA6/AliGenPythia.h"
-#include "STEER/AliMagFMaps.h"
+#include "STEER/AliMagF.h"
#include "STRUCT/AliBODY.h"
#include "STRUCT/AliMAG.h"
#include "STRUCT/AliABSOv3.h"
#include "STRUCT/AliFRAMEv2.h"
#include "STRUCT/AliSHILv3.h"
#include "STRUCT/AliPIPEv3.h"
-#include "ITS/AliITSvPPRasymmFMD.h"
+#include "ITS/AliITSv11.h"
#include "TPC/AliTPCv2.h"
#include "TOF/AliTOFv6T0.h"
-#include "HMPID/AliHMPIDv2.h"
-#include "ZDC/AliZDCv2.h"
+#include "HMPID/AliHMPIDv3.h"
+#include "ZDC/AliZDCv3.h"
#include "TRD/AliTRDv1.h"
#include "FMD/AliFMDv1.h"
#include "MUON/AliMUONv1.h"
#include "PMD/AliPMDv1.h"
#include "T0/AliT0v1.h"
#include "EMCAL/AliEMCALv2.h"
-#include "ACORDE/AliACORDEv0.h"
+#include "ACORDE/AliACORDEv1.h"
#include "VZERO/AliVZEROv7.h"
#include "EVGEN/AliGenExtFile.h"
#include "EVGEN/AliGenReaderTreeK.h"
kGluonRadiation, kNoGluonRadiation
};
-enum PprMag_t
-{
- k2kG, k4kG, k5kG
-};
-
enum PprTrigConf_t
{
kDefaultPPTrig, kDefaultPbPbTrig
"p-p","Pb-Pb"
};
+
// This part for configuration
static PprRad_t srad = kGluonRadiation;
-static PprMag_t smag = k5kG;
+static AliMagF::BMap_t smag = AliMagF::k5kG;
static Int_t sseed = 12345; //Set 0 to use the current time
static PprTrigConf_t strig = kDefaultPPTrig; // default PbPb trigger configuration
- // libraries required by geant321
+ // libraries required by geant321 and Pythia6
#if defined(__CINT__)
+ gSystem->Load("liblhapdf.so"); // Parton density functions
+ gSystem->Load("libEGPythia6.so"); // TGenerator interface
+ gSystem->Load("libpythia6.so"); // Pythia
+ gSystem->Load("libAliPythia6.so"); // ALICE specific implementations
gSystem->Load("libgeant321");
#endif
gAlice->SetRunLoader(rl);
// Set the trigger configuration
- gAlice->SetTriggerDescriptor(pprTrigConfName[strig]);
+ AliSimulation::Instance()->SetTriggerConfig(pprTrigConfName[strig]);
cout<<"Trigger configuration is set to "<<pprTrigConfName[strig]<<endl;
//forbid some decays
AliPythia * py= AliPythia::Instance();
- py->SetMDME(731,1,0); //forbid D*+->D+ + pi0
- py->SetMDME(732,1,0);//forbid D*+->D+ + gamma
+ py->SetMDME(737,1,0); //forbid D*+->D+ + pi0
+ py->SetMDME(738,1,0);//forbid D*+->D+ + gamma
- for(Int_t d=741; d<=756; d++){
+ for(Int_t d=747; d<=762; d++){
py->SetMDME(d,1,0);
}
- for(Int_t d=758; d<=801; d++){
+ for(Int_t d=764; d<=807; d++){
py->SetMDME(d,1,0);
}
gener->SetTrackingFlag(1);
gener->Init();
- if (smag == k2kG) {
+ if (smag == AliMagF::k2kG) {
comment = comment.Append(" | L3 field 0.2 T");
- } else if (smag == k4kG) {
- comment = comment.Append(" | L3 field 0.4 T");
- } else if (smag == k5kG) {
+ } else if (smag == AliMagF::k5kG) {
comment = comment.Append(" | L3 field 0.5 T");
}
// Field (L3 0.4 T)
- AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 1., 10., smag);
- field->SetL3ConstField(0); //Using const. field in the barrel
+ AliMagF* field = new AliMagF("Maps","Maps",-1., -1., smag);
+ TGeoGlobalMagField::Instance()->SetField(field);
+
rl->CdGAFile();
- gAlice->SetField(field);
-//
+ //
Int_t iABSO = 1;
Int_t iDIPO = 1;
Int_t iFMD = 1;
//=================== FRAME parameters ============================
AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
+ FRAME->SetHoles(1);
}
if (iSHIL)
AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
}
- if(iITS) {
+ if (iITS)
+ {
+ //=================== ITS parameters ============================
- //=================== ITS parameters ============================
- //
- // As the innermost detector in ALICE, the Inner Tracking System "impacts" on
- // almost all other detectors. This involves the fact that the ITS geometry
- // still has several options to be followed in parallel in order to determine
- // the best set-up which minimizes the induced background. All the geometries
- // available to date are described in the following. Read carefully the comments
- // and use the default version (the only one uncommented) unless you are making
- // comparisons and you know what you are doing. In this case just uncomment the
- // ITS geometry you want to use and run Aliroot.
- //
- // Detailed geometries:
- //
- //
- //AliITS *ITS = new AliITSv5symm("ITS","Updated ITS TDR detailed version with symmetric services");
- //
- //AliITS *ITS = new AliITSv5asymm("ITS","Updates ITS TDR detailed version with asymmetric services");
- //
- AliITSvPPRasymmFMD *ITS = new AliITSvPPRasymmFMD("ITS","New ITS PPR detailed version with asymmetric services");
- ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
- ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
- // ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det"); // don't touch this parameter if you're not an ITS developer
- ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
- ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
- ITS->SetThicknessChip1(150.); // chip thickness on layer 1 must be in the range [150,300]
- ITS->SetThicknessChip2(150.); // chip thickness on layer 2 must be in the range [150,300]
- ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
- ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
-
- // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful
- // for reconstruction !):
- //
- //
- //AliITSvPPRcoarseasymm *ITS = new AliITSvPPRcoarseasymm("ITS","New ITS PPR coarse version with asymmetric services");
- //ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
- //ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
- //
- //AliITS *ITS = new AliITSvPPRcoarsesymm("ITS","New ITS PPR coarse version with symmetric services");
- //ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
- //ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
- //
- //
- //
- // Geant3 <-> EUCLID conversion
- // ============================
- //
- // SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and
- // media to two ASCII files (called by default ITSgeometry.euc and
- // ITSgeometry.tme) in a format understandable to the CAD system EUCLID.
- // The default (=0) means that you dont want to use this facility.
- //
- ITS->SetEUCLID(0);
+ AliITS *ITS = new AliITSv11("ITS","ITS v11");
}
if (iTPC)
if (iHMPID)
{
//=================== HMPID parameters ===========================
- AliHMPID *HMPID = new AliHMPIDv2("HMPID", "normal HMPID");
+ AliHMPID *HMPID = new AliHMPIDv3("HMPID", "normal HMPID");
}
{
//=================== ZDC parameters ============================
- AliZDC *ZDC = new AliZDCv2("ZDC", "normal ZDC");
+ AliZDC *ZDC = new AliZDCv3("ZDC", "normal ZDC");
}
if (iTRD)
if (iEMCAL)
{
//=================== EMCAL parameters ============================
- AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "SHISH_77_TRD1_2X2_FINAL_110DEG");
+ AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "EMCAL_COMPLETEV1");
}
if (iACORDE)
{
//=================== ACORDE parameters ============================
- AliACORDE *ACORDE = new AliACORDEv0("ACORDE", "normal ACORDE");
+ AliACORDE *ACORDE = new AliACORDEv1("ACORDE", "normal ACORDE");
}
if (iVZERO)
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff