ClassImp(AliMUONTriggerGeometryBuilder)
/// \endcond
+// vertical gap between right and left chambers (kDXZERO*2=4cm)
+const Float_t AliMUONTriggerGeometryBuilder::fgkDXZERO=2.;
+// main distances for chamber definition in first plane/first station
+const Float_t AliMUONTriggerGeometryBuilder::fgkXMIN=34.;
+const Float_t AliMUONTriggerGeometryBuilder::fgkXMED=51.;
+const Float_t AliMUONTriggerGeometryBuilder::fgkXMAX=255.;
+// 090704 fgkXMAX changed from 272 to 255.
+// (see fig.2-4 & 2-5 of Local Trigger Board PRR)
+// segmentation updated accordingly
+const Float_t AliMUONTriggerGeometryBuilder::fgkYMIN=34.;
+const Float_t AliMUONTriggerGeometryBuilder::fgkYMAX=51.;
+// inner/outer radius of flange between beam shield. and chambers (1/station)
+//const Float_t AliMUONTriggerGeometryBuilder::fgkRMIN[2]={50.,50.};
+//const Float_t AliMUONTriggerGeometryBuilder::fgkRMAX[2]={64.,68.};
+// z position of the middle of the gas gap in mother vol
+const Float_t AliMUONTriggerGeometryBuilder::fgkZm=-3.6;
+const Float_t AliMUONTriggerGeometryBuilder::fgkZp=+3.6;
+
+// y positions of vertical supports
+const Float_t AliMUONTriggerGeometryBuilder::fgkYVSup[4]={61.45,122.45,192.95,236.95};
+// dimensions of vertical supports
+const Float_t AliMUONTriggerGeometryBuilder::fgkSizeVSupExt[3]={1.5,1.5,306.+5.};
+const Float_t AliMUONTriggerGeometryBuilder::fgkSizeVSupInt[3]={1.2,1.2,306.+5.};
+// transverse dimensions of angular supports
+const Float_t AliMUONTriggerGeometryBuilder::fgkSizeSupport1V[3]={0.,1.5,0.1};
+const Float_t AliMUONTriggerGeometryBuilder::fgkSizeSupport1H[3]={0.,0.1,1.15}; // z should be 1.4 in the installed set-up
+const Float_t AliMUONTriggerGeometryBuilder::fgkSizeSupport2V[3]={0.,3.0,0.1};
+const Float_t AliMUONTriggerGeometryBuilder::fgkSizeSupport2H[3]={0.,0.1,1.9};
+const Float_t AliMUONTriggerGeometryBuilder::fgkSizeSupportXV[3]={0.,1.25,0.25};
+const Float_t AliMUONTriggerGeometryBuilder::fgkSizeSupportXH[3]={0.,0.25,1.5};
+// transverse dimensions of horizontal cable supports
+const Float_t AliMUONTriggerGeometryBuilder::fgkSizeSupportCable[3]={0.,2.,3.};
+// dimensions of gas pipes (inner and outer radius)
+const Float_t AliMUONTriggerGeometryBuilder::fgkSizeGasPipe[3]={0.2,0.4,0.};
+// Position of gas pipe with respect to angular support
+const Float_t AliMUONTriggerGeometryBuilder::fgkOffsetGasPipe=0.75;
+// Small cut on some volumes to avoid extrusion from SC1x
+const Float_t AliMUONTriggerGeometryBuilder::fgkAvoidExtrusion=2.9;
+
//______________________________________________________________________________
AliMUONTriggerGeometryBuilder::AliMUONTriggerGeometryBuilder(AliMUON* muon)
: AliMUONVGeometryBuilder(16, 4),
- fMUON(muon)
+ fMUON(muon),
+ fIdtmed(0),
+ fIdAir(0),
+ fIdAlu1(0),
+ fIdInox(0),
+ fYEnvPsave(0.),
+ fYEnvMsave(0.),
+ fDYsave(0.),
+ fDXsave(0.),
+ fRsupportpipe()
{
/// Standard constructor
-
+ fRsupportpipe.SetAngles(90.,90.,0.);
}
//______________________________________________________________________________
AliMUONTriggerGeometryBuilder::AliMUONTriggerGeometryBuilder()
: AliMUONVGeometryBuilder(),
- fMUON(0)
+ fMUON(0),
+ fIdtmed(0),
+ fIdAir(0),
+ fIdAlu1(0),
+ fIdInox(0),
+ fYEnvPsave(0.),
+ fYEnvMsave(0.),
+ fDYsave(0.),
+ fDXsave(0.),
+ fRsupportpipe()
{
/// Default constructor
}
/// Destructor
}
-//
-// public methods
-//
+//______________________________________________________________________________
+TString AliMUONTriggerGeometryBuilder::GetVolumeName(const TString& volume, Int_t icount) const
+{
+// Function to generate a short volume name from its long variant
+
+ if ( volume == "volAlu" ) {
+ char volAlu[5]; // Alu
+ snprintf(volAlu,5,"SC%dA",icount+1);
+ return volAlu;
+ }
+ else if ( volume == "volAluSupportH") {
+ char volAluSupportH[6];
+ snprintf(volAluSupportH,6,"SALH%d",icount+1);
+ return volAluSupportH;
+ }
+ else if ( volume == "volAirSupportH") {
+ char volAirSupportH[6];
+ snprintf(volAirSupportH,6,"SAIH%d",icount+1);
+ return volAirSupportH;
+ }
+ else if ( volume == "volInoxGasPipe") {
+ char volInoxGasPipe[7];
+ snprintf(volInoxGasPipe,7,"SPINO%d",icount+1);
+ return volInoxGasPipe;
+ }
+
+ AliErrorStream() << "Volume " << volume << " name is not defined." << endl;
+ return "";
+}
//______________________________________________________________________________
-void AliMUONTriggerGeometryBuilder::CreateGeometry()
+TString AliMUONTriggerGeometryBuilder::GetVolEnvName(Int_t icount, Int_t ienv) const
{
-/// From AliMUONv1::CreateGeometry()
+/// Compose envelope names as:
+/// S0R1, S0R2, ..., S0R9, S0L1, S0L2, ..., S0L9
+/// where ienv = 0, .., 17
+
+ TString name = "S";
+ name += icount;
+ if ( ienv < 9 ) {
+ name += "R";
+ name += (ienv + 1);
+ }
+ else {
+ name += "L";
+ name += (ienv - 8) ;
+ }
+ return name;
+}
- /*
- zpos1 and zpos2 are the middle of the first and second
- planes of station 1 (+1m for second station):
- zpos1=(zpos1m+zpos1p)/2=(15999+16071)/2=16035 mm, thick/2=40 mm
- zpos2=(zpos2m+zpos2p)/2=(16169+16241)/2=16205 mm, thick/2=40 mm
- zposxm and zposxp= middles of gaz gaps within a detection plane
- rem: the total thickness accounts for 1 mm of al on both
- side of the RPCs (see zpos1 and zpos2)
- */
-
- Int_t *idtmed = fMUON->GetIdtmed()->GetArray()-1099;
- Int_t idAir= idtmed[1100]; // medium 1
- Int_t idAlu1=idtmed[1103]; // medium 4
- Int_t idInox = idtmed[1128]; // medium 29 Stainless Steel (18%Cr,9%Ni,Fe)
-
- Int_t detElemId=0; // Detection Element Number
- Float_t tpar[3];
- Double_t dpar[3];
- Double_t spar[3];
- Double_t ppar[3];
-
-// vertical gap between right and left chambers (kDXZERO*2=4cm)
- const Float_t kDXZERO=2.;
-// main distances for chamber definition in first plane/first station
- const Float_t kXMIN=34.;
- const Float_t kXMED=51.;
- const Float_t kXMAX=255.;
-// 090704 kXMAX changed from 272 to 255.
-// (see fig.2-4 & 2-5 of Local Trigger Board PRR)
-// segmentation updated accordingly
- const Float_t kYMIN=34.;
- const Float_t kYMAX=51.;
-// inner/outer radius of flange between beam shield. and chambers (1/station)
-// const Float_t kRMIN[2]={50.,50.};
-// const Float_t kRMAX[2]={64.,68.};
-// z position of the middle of the gas gap in mother vol
- const Float_t kZm=-3.6;
- const Float_t kZp=+3.6;
-
-// y positions of vertical supports
- const Float_t kYVSup[4]={61.45,122.45,192.95,236.95};
-// dimensions of vertical supports
- const Float_t kSizeVSupExt[3]={1.5,1.5,306.+5.};
- const Float_t kSizeVSupInt[3]={1.2,1.2,306.+5.};
-// transverse dimensions of angular supports
- const Float_t kSizeSupport1V[3]={0.,1.5,0.1};
- const Float_t kSizeSupport1H[3]={0.,0.1,1.15}; // z should be 1.4 in the installed set-up
- const Float_t kSizeSupport2V[3]={0.,3.0,0.1};
- const Float_t kSizeSupport2H[3]={0.,0.1,1.9};
- const Float_t kSizeSupportXV[3]={0.,1.25,0.25};
- const Float_t kSizeSupportXH[3]={0.,0.25,1.5};
-// transverse dimensions of horizontal cable supports
- const Float_t kSizeSupportCable[3]={0.,2.,3.};
-// dimensions of gas pipes (inner and outer radius)
- const Float_t kSizeGasPipe[3]={0.2,0.4,0.};
-// Position of gas pipe with respect to angular support
- const Float_t kOffsetGasPipe=0.75;
-// Small cut on some volumes to avoid extrusion from SC1x
- const Float_t kAvoidExtrusion=2.9;
+//______________________________________________________________________________
+TString AliMUONTriggerGeometryBuilder::GetVolAluAngSuppName(
+ const TString& type1234X,
+ const TString& typeHV,
+ Int_t icount) const
+{
+/// Utility function to generate volume name
+
+ TString name = "SA";
+ name += type1234X;
+ name += typeHV;
+ name += icount+1;
+ return name;
+}
- Float_t zpos1= AliMUONConstants::DefaultChamberZ(10);
- Double_t dstation = ( ( - AliMUONConstants::DefaultChamberZ(11)) -
- ( - AliMUONConstants::DefaultChamberZ(10)) ) /2.1;
- Float_t par[3];
- par[2] = dstation;
+//______________________________________________________________________________
+TString AliMUONTriggerGeometryBuilder::GetVolEnvSuppAngName(
+ const TString& type1234X,
+ const TString& typeHV,
+ const TString& typeABDEF,
+ Int_t icount, Int_t ivol) const
+{
+/// Utility function to generate volume name
-// ratio of zpos1m/zpos1p and inverse for first plane
- Float_t zmp=(zpos1-3.6)/(zpos1+3.6);
- Float_t zpm=1./zmp;
-
- Int_t icount=0; // chamber counter (0 1 2 3)
-
- for (Int_t istation=0; istation<2; istation++) { // loop on stations
- for (Int_t iplane=0; iplane<2; iplane++) { // loop on detection planes
-
- Int_t iVolNum=1; // counter Volume Number
- icount = Int_t(iplane<<0)+Int_t(istation<<1);
-
- par[0] = AliMUONConstants::Rmin(5+istation);
- par[1] = AliMUONConstants::Rmax(5+istation);
- Char_t volName[6];
- snprintf(volName,6,"%s%d", "SC",11+icount);
- gMC->Gsvolu(volName,"TUBE", idAir, par, 3);
- //SetVolume(10+icount, volName);
-// Float_t zpos = AliMUONConstants::DefaultChamberZ(10+icount);
-
-/* removed 03/18/05
-// Flange between beam shielding and RPC
- tpar[0]= kRMIN[istation];
- tpar[1]= kRMAX[istation];
- tpar[2]= 4.0;
- char volFlange[5];
- sprintf(volFlange,"SF%dA",icount+1);
- gMC->Gsvolu(volFlange,"TUBE",idAlu1,tpar,3); // Al
- // changed by ivana
- //gMC->Gspos(volFlange,1,"ALIC",0.,0.,zpos,0,"MANY");
- iChamber->GetGeometry()->GetEnvelopeStore()
- ->AddEnvelope(volFlange, 0, false, "MANY");
-*/
-
-// scaling factor
-// Float_t zRatio = zpos / zpos1;
- Float_t zRatio = AliMUONConstants::DefaultRatioTriggerChamber(icount);
+ TString name = "S";
+ name += typeHV;
+ name += type1234X;
+ name += icount+1;
+ name += typeABDEF;
+ name += ivol;
+ return name;
+}
+//______________________________________________________________________________
+TString AliMUONTriggerGeometryBuilder::GetVolEnvInoxGasPipeName(
+ const TString& type12,
+ const TString& typeABCDEF,
+ Int_t icount, Int_t ivol) const
+{
+/// Utility function to generate volume name
+ TString name = "SP";
+ name += type12;
+ name += icount+1;
+ name += typeABCDEF;
+ name += ivol;
+ return name;
+}
-
-// envelopes (same size except line 5, all virtual)
- char volEnv[18][5];
- tpar[1] = kYMIN * zRatio;
- tpar[2] = 0.4;
- Int_t i=0; // counter
- for (Int_t icolumn=0; icolumn<2; icolumn++) {
- for (Int_t iline=1; iline<10; iline++){
- tpar[0] = (kXMAX/2.) * zRatio;
- if (iline==5) tpar[0] = ((kXMAX-kXMED)/2.)*zRatio;
- if (icolumn==0)
- snprintf(volEnv[i],5,"S%dR%d",icount,iline);
- else
- snprintf(volEnv[i],5,"S%dL%d",icount,iline);
- // gMC->Gsvolu(volEnv[i],"BOX",idAir,tpar,0);
- i++;
- }
- }
+//______________________________________________________________________________
+void AliMUONTriggerGeometryBuilder::BuildChamberPrototype(Int_t icount) const
+{
+/// Build chamber prototype
-// chamber prototype
- tpar[0]= 0.;
- tpar[1]= 0.;
- tpar[2]= 0.;
- char volAlu[5]; // Alu
- char volBak[5]; // Bakelite
- char volGaz[5]; // Gas streamer
- snprintf(volAlu,5,"SC%dA",icount+1);
- snprintf(volBak,5,"SB%dA",icount+1);
- snprintf(volGaz,5,"S%dG",icount+11);
- gMC->Gsvolu(volAlu,"BOX",idAlu1,tpar,0); // Al
- gMC->Gsvolu(volBak,"BOX",idtmed[1107],tpar,0); // Bakelite
- gMC->Gsvolu(volGaz,"BOX",idtmed[1106],tpar,0); // Gas streamer
- tpar[0] = -1.;
- tpar[1] = -1.;
- tpar[2] = 0.1;
- gMC->Gsposp(volGaz,1,volBak,0.,0.,0.,0,"ONLY",tpar,3);
- tpar[2] = 0.3;
- gMC->Gsposp(volBak,1,volAlu,0.,0.,0.,0,"ONLY",tpar,3);
+ Float_t tpar[3];
+ tpar[0]= 0.;
+ tpar[1]= 0.;
+ tpar[2]= 0.;
+ char volBak[5]; // Bakelite
+ char volGaz[5]; // Gas streamer
+ snprintf(volBak,5,"SB%dA",icount+1);
+ snprintf(volGaz,5,"S%dG",icount+11);
+ gMC->Gsvolu(GetVolumeName("volAlu", icount),"BOX",fIdAlu1,tpar,0); // Al
+ gMC->Gsvolu(volBak,"BOX",fIdtmed[1107],tpar,0); // Bakelite
+ gMC->Gsvolu(volGaz,"BOX",fIdtmed[1106],tpar,0); // Gas streamer
+ tpar[0] = -1.;
+ tpar[1] = -1.;
+ tpar[2] = 0.1;
+ gMC->Gsposp(volGaz,1,volBak,0.,0.,0.,0,"ONLY",tpar,3);
+ tpar[2] = 0.3;
+ gMC->Gsposp(volBak,1,GetVolumeName("volAlu", icount),0.,0.,0.,0,"ONLY",tpar,3);
+}
-// RPC supports (vertical)
+//______________________________________________________________________________
+void AliMUONTriggerGeometryBuilder::BuildRPCSupportsVertical(Int_t& iVolNum, Int_t icount) const
+{
+/// Build RPC vertical supports
+
+ Float_t zRatio = AliMUONConstants::DefaultRatioTriggerChamber(icount);
+ char volAluSupport[5],volAirSupport[5];
+ snprintf(volAluSupport,5,"SAL%d",icount+1);
+ snprintf(volAirSupport,5,"SAI%d",icount+1);
+ char volEnvSupport[12][7];
+ for(Int_t ii=0;ii<8;ii++){
+ snprintf(volEnvSupport[ii],7,"SEA%dV%d",icount+1,ii);
+ }
+ Float_t tpar[3];
+ tpar[0]= 0.;
+ tpar[1]= 0.;
+ tpar[2]= 0.;
+ gMC->Gsvolu(volAluSupport,"BOX",fIdAlu1,tpar,0);
+ gMC->Gsvolu(volAirSupport,"BOX",fIdAir,tpar,0);
+ tpar[0]=fgkSizeVSupInt[0];
+ tpar[1]=fgkSizeVSupInt[1];
+ tpar[2]=-1.;
+ gMC->Gsposp(volAirSupport,1,volAluSupport,0.,0.,0.,0,"ONLY",tpar,3);
+
+ TGeoRotation rsupportv;
+ rsupportv.SetAngles(0.,90.,0.);
+ Double_t dpar[3];
+ dpar[0]=fgkSizeVSupExt[0];
+ dpar[1]=fgkSizeVSupExt[1];
+ dpar[2]=fgkSizeVSupExt[2]*zRatio;
+ for(Int_t ii=0;ii<4;ii++){
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupport[ii], 0, true,
+ TGeoTranslation(-fgkYVSup[ii]*zRatio,0.,0.),rsupportv);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluSupport,volEnvSupport[ii],iVolNum++,3, dpar);
+ }
+ for(Int_t ii=4;ii<8;ii++){
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupport[ii], 0, true,
+ TGeoTranslation(fgkYVSup[ii-4]*zRatio,0.,0.),rsupportv);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluSupport,volEnvSupport[ii],iVolNum++,3, dpar);
+ }
+}
+
+//______________________________________________________________________________
+void AliMUONTriggerGeometryBuilder::BuildRPCSupportsHorizontal(Int_t icount) const
+{
+/// Build RPC horizontal supports
- char volAluSupport[5],volAirSupport[5];
- snprintf(volAluSupport,5,"SAL%d",icount+1);
- snprintf(volAirSupport,5,"SAI%d",icount+1);
- char volEnvSupport[12][7];
- for(Int_t ii=0;ii<8;ii++){
- snprintf(volEnvSupport[ii],7,"SEA%dV%d",icount+1,ii);
- }
- tpar[0]= 0.;
- tpar[1]= 0.;
- tpar[2]= 0.;
- gMC->Gsvolu(volAluSupport,"BOX",idAlu1,tpar,0);
- gMC->Gsvolu(volAirSupport,"BOX",idAir,tpar,0);
- tpar[0]=kSizeVSupInt[0];
- tpar[1]=kSizeVSupInt[1];
- tpar[2]=-1.;
- gMC->Gsposp(volAirSupport,1,volAluSupport,0.,0.,0.,0,"ONLY",tpar,3);
-
- TGeoRotation rsupportv;
- rsupportv.SetAngles(0.,90.,0.);
- dpar[0]=kSizeVSupExt[0];
- dpar[1]=kSizeVSupExt[1];
- dpar[2]=kSizeVSupExt[2]*zRatio;
- for(Int_t ii=0;ii<4;ii++){
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupport[ii], 0, true,
- TGeoTranslation(-kYVSup[ii]*zRatio,0.,0.),rsupportv);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluSupport,volEnvSupport[ii],iVolNum++,3, dpar);
- }
- for(Int_t ii=4;ii<8;ii++){
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupport[ii], 0, true,
- TGeoTranslation(kYVSup[ii-4]*zRatio,0.,0.),rsupportv);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluSupport,volEnvSupport[ii],iVolNum++,3, dpar);
- }
-
// RPC supports (horizontal)
// supports for cables
- char volAluSupportH[6],volAirSupportH[6];
- snprintf(volAluSupportH,6,"SALH%d",icount+1);
- snprintf(volAirSupportH,6,"SAIH%d",icount+1);
- char volEnvSupportHA[6][8],volEnvSupportHBC[12][8],volEnvSupportHD[12][8],volEnvSupportHE[12][8],volEnvSupportHF[12][8];
- for(Int_t jj=0;jj<2;jj++){
- for(Int_t ii=0;ii<6;ii++){
- if(ii<3)snprintf(volEnvSupportHA[3*jj+ii],8,"SA%dHA%d",icount+1,3*jj+ii);
- snprintf(volEnvSupportHBC[6*jj+ii],8,"SA%dHB%d",icount+1,6*jj+ii);
- snprintf(volEnvSupportHD[6*jj+ii],8,"SA%dHD%d",icount+1,6*jj+ii);
- snprintf(volEnvSupportHE[6*jj+ii],8,"SA%dHE%d",icount+1,6*jj+ii);
- snprintf(volEnvSupportHF[6*jj+ii],8,"SA%dHF%d",icount+1,6*jj+ii);
- }
- }
- tpar[0]= 0.;
- tpar[1]= 0.;
- tpar[2]= 0.;
- gMC->Gsvolu(volAluSupportH,"BOX",idAlu1,tpar,0);
- gMC->Gsvolu(volAirSupportH,"BOX",idAir,tpar,0);
- tpar[0]=-1.;
- tpar[1]=1.9;
- tpar[2]=2.8;
- gMC->Gsposp(volAirSupportH,1,volAluSupportH,0.,0.,0.,0,"ONLY",tpar,3);
-
-// Angular supports for chambers
- char volAluAngSupport1V[6],volAluAngSupport1H[6];
- snprintf(volAluAngSupport1H,6,"SA1H%d",icount+1);
- snprintf(volAluAngSupport1V,6,"SA1V%d",icount+1);
- char volAluAngSupport2V[6],volAluAngSupport2H[6];
- snprintf(volAluAngSupport2H,6,"SA2H%d",icount+1);
- snprintf(volAluAngSupport2V,6,"SA2V%d",icount+1);
- char volAluAngSupport3V[6],volAluAngSupport3H[6];
- snprintf(volAluAngSupport3H,6,"SA3H%d",icount+1);
- snprintf(volAluAngSupport3V,6,"SA3V%d",icount+1);
- char volAluAngSupport4V[6],volAluAngSupport4H[6];
- snprintf(volAluAngSupport4H,6,"SA4H%d",icount+1);
- snprintf(volAluAngSupport4V,6,"SA4V%d",icount+1);
- char volAluAngSupportXV[6],volAluAngSupportXH[6];
- snprintf(volAluAngSupportXH,6,"SAXH%d",icount+1);
- snprintf(volAluAngSupportXV,6,"SAXV%d",icount+1);
- char volEnvSuppAng1HA[2][7],volEnvSuppAng1HBC[4][7],volEnvSuppAng1HD[4][7],volEnvSuppAng1HE[4][7],volEnvSuppAng1HF[4][7];
- char volEnvSuppAng1VA[2][7],volEnvSuppAng1VBC[4][7],volEnvSuppAng1VD[4][7],volEnvSuppAng1VE[4][7],volEnvSuppAng1VF[4][7];
- char volEnvSuppAng2HA[2][7],volEnvSuppAng2HBC[4][7],volEnvSuppAng2HD[4][7],volEnvSuppAng2HE[4][7],volEnvSuppAng2HF[4][7];
- char volEnvSuppAng2VA[2][7],volEnvSuppAng2VBC[4][7],volEnvSuppAng2VD[4][7],volEnvSuppAng2VE[4][7],volEnvSuppAng2VF[4][7];
- char volEnvSuppAng3HA[2][7],volEnvSuppAng3HBC[4][7],volEnvSuppAng3HD[4][7],volEnvSuppAng3HE[4][7],volEnvSuppAng3HF[4][7];
- char volEnvSuppAng3VA[2][7],volEnvSuppAng3VBC[4][7],volEnvSuppAng3VD[4][7],volEnvSuppAng3VE[4][7],volEnvSuppAng3VF[4][7];
- char volEnvSuppAng4HA[2][7],volEnvSuppAng4HBC[4][7],volEnvSuppAng4HD[4][7],volEnvSuppAng4HE[4][7],volEnvSuppAng4HF[4][7];
- char volEnvSuppAng4VA[2][7],volEnvSuppAng4VBC[4][7],volEnvSuppAng4VD[4][7],volEnvSuppAng4VE[4][7],volEnvSuppAng4VF[4][7];
- char volEnvSuppAngXHA[2][7],volEnvSuppAngXHBC[4][7],volEnvSuppAngXHD[4][7],volEnvSuppAngXHE[4][7],volEnvSuppAngXHF[4][7];
- char volEnvSuppAngXVA[2][7],volEnvSuppAngXVBC[4][7],volEnvSuppAngXVD[4][7],volEnvSuppAngXVE[4][7],volEnvSuppAngXVF[4][7];
- for(Int_t ii=0;ii<4;ii++){
- if(ii<2)snprintf(volEnvSuppAng1HA[ii],7,"SH1%dA%d",icount+1,ii);
- snprintf(volEnvSuppAng1HBC[ii],7,"SH1%dB%d",icount+1,ii);
- snprintf(volEnvSuppAng1HD[ii],7,"SH1%dD%d",icount+1,ii);
- snprintf(volEnvSuppAng1HE[ii],7,"SH1%dE%d",icount+1,ii);
- snprintf(volEnvSuppAng1HF[ii],7,"SH1%dF%d",icount+1,ii);
- if(ii<2)snprintf(volEnvSuppAng1VA[ii],7,"SV1%dA%d",icount+1,ii);
- snprintf(volEnvSuppAng1VBC[ii],7,"SV1%dB%d",icount+1,ii);
- snprintf(volEnvSuppAng1VD[ii],7,"SV1%dD%d",icount+1,ii);
- snprintf(volEnvSuppAng1VE[ii],7,"SV1%dE%d",icount+1,ii);
- snprintf(volEnvSuppAng1VF[ii],7,"SV1%dF%d",icount+1,ii);
- if(ii<2)snprintf(volEnvSuppAng2HA[ii],7,"SH2%dA%d",icount+1,ii);
- snprintf(volEnvSuppAng2HBC[ii],7,"SH2%dB%d",icount+1,ii);
- snprintf(volEnvSuppAng2HD[ii],7,"SH2%dD%d",icount+1,ii);
- snprintf(volEnvSuppAng2HE[ii],7,"SH2%dE%d",icount+1,ii);
- snprintf(volEnvSuppAng2HF[ii],7,"SH2%dF%d",icount+1,ii);
- if(ii<2)snprintf(volEnvSuppAng2VA[ii],7,"SV2%dA%d",icount+1,ii);
- snprintf(volEnvSuppAng2VBC[ii],7,"SV2%dB%d",icount+1,ii);
- snprintf(volEnvSuppAng2VD[ii],7,"SV2%dD%d",icount+1,ii);
- snprintf(volEnvSuppAng2VE[ii],7,"SV2%dE%d",icount+1,ii);
- snprintf(volEnvSuppAng2VF[ii],7,"SV2%dF%d",icount+1,ii);
- if(ii<2)snprintf(volEnvSuppAng3HA[ii],7,"SH3%dA%d",icount+1,ii);
- snprintf(volEnvSuppAng3HBC[ii],7,"SH3%dB%d",icount+1,ii);
- snprintf(volEnvSuppAng3HD[ii],7,"SH3%dD%d",icount+1,ii);
- snprintf(volEnvSuppAng3HE[ii],7,"SH3%dE%d",icount+1,ii);
- snprintf(volEnvSuppAng3HF[ii],7,"SH3%dF%d",icount+1,ii);
- if(ii<2)snprintf(volEnvSuppAng3VA[ii],7,"SV3%dA%d",icount+1,ii);
- snprintf(volEnvSuppAng3VBC[ii],7,"SV3%dB%d",icount+1,ii);
- snprintf(volEnvSuppAng3VD[ii],7,"SV3%dD%d",icount+1,ii);
- snprintf(volEnvSuppAng3VE[ii],7,"SV3%dE%d",icount+1,ii);
- snprintf(volEnvSuppAng3VF[ii],7,"SV3%dF%d",icount+1,ii);
- if(ii<2)snprintf(volEnvSuppAng4HA[ii],7,"SH4%dA%d",icount+1,ii);
- snprintf(volEnvSuppAng4HBC[ii],7,"SH4%dB%d",icount+1,ii);
- snprintf(volEnvSuppAng4HD[ii],7,"SH4%dD%d",icount+1,ii);
- snprintf(volEnvSuppAng4HE[ii],7,"SH4%dE%d",icount+1,ii);
- snprintf(volEnvSuppAng4HF[ii],7,"SH4%dF%d",icount+1,ii);
- if(ii<2)snprintf(volEnvSuppAng4VA[ii],7,"SV4%dA%d",icount+1,ii);
- snprintf(volEnvSuppAng4VBC[ii],7,"SV4%dB%d",icount+1,ii);
- snprintf(volEnvSuppAng4VD[ii],7,"SV4%dD%d",icount+1,ii);
- snprintf(volEnvSuppAng4VE[ii],7,"SV4%dE%d",icount+1,ii);
- snprintf(volEnvSuppAng4VF[ii],7,"SV4%dF%d",icount+1,ii);
- if(ii<2)snprintf(volEnvSuppAngXHA[ii],7,"SHX%dA%d",icount+1,ii);
- snprintf(volEnvSuppAngXHBC[ii],7,"SHX%dB%d",icount+1,ii);
- snprintf(volEnvSuppAngXHD[ii],7,"SHX%dD%d",icount+1,ii);
- snprintf(volEnvSuppAngXHE[ii],7,"SHX%dE%d",icount+1,ii);
- snprintf(volEnvSuppAngXHF[ii],7,"SHX%dF%d",icount+1,ii);
- if(ii<2)snprintf(volEnvSuppAngXVA[ii],7,"SVX%dA%d",icount+1,ii);
- snprintf(volEnvSuppAngXVBC[ii],7,"SVX%dB%d",icount+1,ii);
- snprintf(volEnvSuppAngXVD[ii],7,"SVX%dD%d",icount+1,ii);
- snprintf(volEnvSuppAngXVE[ii],7,"SVX%dE%d",icount+1,ii);
- snprintf(volEnvSuppAngXVF[ii],7,"SVX%dF%d",icount+1,ii);
- }
- tpar[0]= 0.;
- tpar[1]= 0.;
- tpar[2]= 0.;
- gMC->Gsvolu(volAluAngSupport1V,"BOX",idAlu1,tpar,0);
- gMC->Gsvolu(volAluAngSupport1H,"BOX",idAlu1,tpar,0);
- gMC->Gsvolu(volAluAngSupport2V,"BOX",idAlu1,tpar,0);
- gMC->Gsvolu(volAluAngSupport2H,"BOX",idAlu1,tpar,0);
- gMC->Gsvolu(volAluAngSupport3V,"BOX",idAlu1,tpar,0);
- gMC->Gsvolu(volAluAngSupport3H,"BOX",idAlu1,tpar,0);
- gMC->Gsvolu(volAluAngSupport4V,"BOX",idAlu1,tpar,0);
- gMC->Gsvolu(volAluAngSupport4H,"BOX",idAlu1,tpar,0);
- gMC->Gsvolu(volAluAngSupportXV,"BOX",idAlu1,tpar,0);
- gMC->Gsvolu(volAluAngSupportXH,"BOX",idAlu1,tpar,0);
-
-// gas pipes
- char volInoxGasPipe[7];
- snprintf(volInoxGasPipe,7,"SPINO%d",icount+1);
- char volEnvInoxGasPipe1A[2][7],volEnvInoxGasPipe1BC[4][8],volEnvInoxGasPipe1D[4][7],volEnvInoxGasPipe1E[4][7],volEnvInoxGasPipe1F[4][7];
- char volEnvInoxGasPipe2A[2][7],volEnvInoxGasPipe2BC[4][8],volEnvInoxGasPipe2D[4][7],volEnvInoxGasPipe2E[4][7],volEnvInoxGasPipe2F[4][7];
- for(Int_t ii=0;ii<4;ii++){
- if(ii<2)snprintf(volEnvInoxGasPipe1A[ii],7,"SP1%dA%d",icount+1,ii);
- snprintf(volEnvInoxGasPipe1BC[ii],8,"SP1%dBC%d",icount+1,ii);
- snprintf(volEnvInoxGasPipe1D[ii],7,"SP1%dD%d",icount+1,ii);
- snprintf(volEnvInoxGasPipe1E[ii],7,"SP1%dE%d",icount+1,ii);
- snprintf(volEnvInoxGasPipe1F[ii],7,"SP1%dF%d",icount+1,ii);
- }
- for(Int_t ii=0;ii<4;ii++){
- if(ii<2)snprintf(volEnvInoxGasPipe2A[ii],7,"SP2%dA%d",icount+1,ii);
- snprintf(volEnvInoxGasPipe2BC[ii],8,"SP2%dBC%d",icount+1,ii);
- snprintf(volEnvInoxGasPipe2D[ii],7,"SP2%dD%d",icount+1,ii);
- snprintf(volEnvInoxGasPipe2E[ii],7,"SP2%dE%d",icount+1,ii);
- snprintf(volEnvInoxGasPipe2F[ii],7,"SP2%dF%d",icount+1,ii);
- }
- tpar[0]= 0.;
- tpar[1]= 0.;
- tpar[2]= 0.;
- gMC->Gsvolu(volInoxGasPipe,"TUBE",idInox,tpar,0);
- TGeoRotation rsupportpipe;
- rsupportpipe.SetAngles(90.,90.,0.);
-
-// chamber type A
- Float_t xEnv = (kDXZERO+kXMED+(kXMAX-kXMED)/2.)*zRatio;
- Float_t yEnvM = 0.; // y low position of envelope in chamber
- Float_t yEnvP = 0.; // y up position of envelope in chamber
- Float_t yEnvPsave = 0.; // tmp data
- Float_t yEnvMsave = 0.; // tmp data
- Float_t xpos = 0.; // x position of RPC in envelope
- Float_t ypos = 0.; // y position of RPC in envelope
- dpar[2] = 0.4;
- dpar[0] = ((kXMAX-kXMED)/2.)*zRatio;
- dpar[1] = kYMIN * zRatio;
-
- detElemId = (10+icount+1)*100;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[4], detElemId, true, TGeoTranslation(xEnv,yEnvP,kZp));
- detElemId = (10+icount+1)*100+9;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[13], detElemId, true, TGeoTranslation(-xEnv,yEnvM,kZm),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[4],iVolNum++,3, dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[13],iVolNum++,3, dpar);
+ Float_t tpar[3];
+ tpar[0]= 0.;
+ tpar[1]= 0.;
+ tpar[2]= 0.;
+ TString volAluSupportH = GetVolumeName("volAluSupportH", icount);
+ TString volAirSupportH = GetVolumeName("volAirSupportH", icount);
+ gMC->Gsvolu(volAluSupportH,"BOX",fIdAlu1,tpar,0);
+ gMC->Gsvolu(volAirSupportH,"BOX",fIdAir,tpar,0);
+ tpar[0]=-1.;
+ tpar[1]=1.9;
+ tpar[2]=2.8;
+ gMC->Gsposp(volAirSupportH,1,volAluSupportH,0.,0.,0.,0,"ONLY",tpar,3);
+}
-// horizontal cable support chamber type A
+//______________________________________________________________________________
+void AliMUONTriggerGeometryBuilder::BuildAngularSupportForChambers(Int_t icount) const
+{
+/// Build angular supports for chambers
+
+ Float_t tpar[3];
+ tpar[0]= 0.;
+ tpar[1]= 0.;
+ tpar[2]= 0.;
+ gMC->Gsvolu(GetVolAluAngSuppName("1","V",icount),"BOX",fIdAlu1,tpar,0);
+ gMC->Gsvolu(GetVolAluAngSuppName("1","H",icount),"BOX",fIdAlu1,tpar,0);
+ gMC->Gsvolu(GetVolAluAngSuppName("2","V",icount),"BOX",fIdAlu1,tpar,0);
+ gMC->Gsvolu(GetVolAluAngSuppName("2","H",icount),"BOX",fIdAlu1,tpar,0);
+ gMC->Gsvolu(GetVolAluAngSuppName("3","V",icount),"BOX",fIdAlu1,tpar,0);
+ gMC->Gsvolu(GetVolAluAngSuppName("3","H",icount),"BOX",fIdAlu1,tpar,0);
+ gMC->Gsvolu(GetVolAluAngSuppName("4","V",icount),"BOX",fIdAlu1,tpar,0);
+ gMC->Gsvolu(GetVolAluAngSuppName("4","H",icount),"BOX",fIdAlu1,tpar,0);
+ gMC->Gsvolu(GetVolAluAngSuppName("X","V",icount),"BOX",fIdAlu1,tpar,0);
+ gMC->Gsvolu(GetVolAluAngSuppName("X","H",icount),"BOX",fIdAlu1,tpar,0);
+}
- spar[0]=((kXMAX/2)-kYVSup[0]/2.)*zRatio;
- spar[1]=kSizeSupportCable[1];
- spar[2]=kSizeSupportCable[2];
- Float_t offsetSuppA = ((kXMAX-kXMED)/2.)*zRatio-(((kXMAX/2)-kYVSup[0]/2.)*zRatio);
- for(Int_t in=0;in<3;in++){
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHA[in], 0, true,
- TGeoTranslation(xEnv+offsetSuppA/2.,yEnvP+dpar[1]/2.*(in-1),-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHA[in+3], 0, true,
- TGeoTranslation(-(xEnv+offsetSuppA/2.),yEnvM+dpar[1]/2.*(in-1),kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- }
- for(Int_t ii=0;ii<6;ii++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluSupportH,volEnvSupportHA[ii],iVolNum++,3, spar);
-
-// angular supports chamber type A
-// 1 vertical
-
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1V[1];
- spar[2]=kSizeSupport1V[2];
- Float_t sparysave=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VA[0], 0, true,
- TGeoTranslation(xEnv,yEnvP-dpar[1],kZp+dpar[2]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VA[1], 0, true,
- TGeoTranslation(-xEnv,yEnvM-dpar[1],kZm-dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VA[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VA[1],iVolNum++,3, spar);
+//______________________________________________________________________________
+void AliMUONTriggerGeometryBuilder::BuildGasPipes(Int_t icount) const
+{
+/// Build gas pipes
+ TString volInoxGasPipe = GetVolumeName("volInoxGasPipe", icount);
+ Float_t tpar[3];
+ tpar[0]= 0.;
+ tpar[1]= 0.;
+ tpar[2]= 0.;
+ gMC->Gsvolu(volInoxGasPipe,"TUBE",fIdInox,tpar,0);
+}
+
+//______________________________________________________________________________
+void AliMUONTriggerGeometryBuilder::BuildChamberTypeA(Int_t& iVolNum, Int_t icount)
+{
+/// Build chamber type A and horizontal support
+
+ Double_t dpar[3];
+ Double_t spar[3];
+ Double_t ppar[3];
+
+// chamber type A
+ Float_t zRatio = AliMUONConstants::DefaultRatioTriggerChamber(icount);
+ Float_t xEnv = (fgkDXZERO+fgkXMED+(fgkXMAX-fgkXMED)/2.)*zRatio;
+ Float_t yEnvM = 0.; // y low position of envelope in chamber
+ Float_t yEnvP = 0.; // y up position of envelope in chamber
+ fYEnvPsave = 0.; // tmp data
+ fYEnvMsave = 0.; // tmp data
+ //Float_t xpos = 0.; // x position of RPC in envelope
+ //Float_t ypos = 0.; // y position of RPC in envelope
+ dpar[2] = 0.4;
+ dpar[0] = ((fgkXMAX-fgkXMED)/2.)*zRatio;
+ dpar[1] = fgkYMIN * zRatio;
+
+ Int_t detElemId = (10+icount+1)*100;
+ TString volEnv4 = GetVolEnvName(icount, 4);
+ TString volEnv13 = GetVolEnvName(icount, 13);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnv4, detElemId, true,
+ TGeoTranslation(xEnv,yEnvP,fgkZp));
+ detElemId = (10+icount+1)*100+9;
+ GetEnvelopes(16+icount)->AddEnvelope(volEnv13, detElemId, true,
+ TGeoTranslation(-xEnv,yEnvM,fgkZm),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAlu = GetVolumeName("volAlu", icount);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv4,iVolNum++,3, dpar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv13,iVolNum++,3, dpar);
+
+// horizontal cable support chamber type A
+ char volEnvSupportHA[6][8];
+ for(Int_t jj=0;jj<2;jj++){
+ for(Int_t ii=0;ii<6;ii++){
+ if(ii<3)snprintf(volEnvSupportHA[3*jj+ii],8,"SA%dHA%d",icount+1,3*jj+ii);
+ }
+ }
+
+ spar[0]=((fgkXMAX/2)-fgkYVSup[0]/2.)*zRatio;
+ spar[1]=fgkSizeSupportCable[1];
+ spar[2]=fgkSizeSupportCable[2];
+ Float_t offsetSuppA = ((fgkXMAX-fgkXMED)/2.)*zRatio-(((fgkXMAX/2)-fgkYVSup[0]/2.)*zRatio);
+ for(Int_t in=0;in<3;in++){
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHA[in], 0, true,
+ TGeoTranslation(xEnv+offsetSuppA/2.,yEnvP+dpar[1]/2.*(in-1),-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHA[in+3], 0, true,
+ TGeoTranslation(-(xEnv+offsetSuppA/2.),yEnvM+dpar[1]/2.*(in-1),fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ }
+ for(Int_t ii=0;ii<6;ii++) {
+ TString volAluSupportH = GetVolumeName("volAluSupportH", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluSupportH,volEnvSupportHA[ii],iVolNum++,3, spar);
+ }
+
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1V[1];
+ spar[2]=fgkSizeSupport1V[2];
+ Float_t sparysave=spar[1];
+ TString volEnvSuppAng1VA0 = GetVolEnvSuppAngName("1", "V", "A", icount, 0);
+ TString volEnvSuppAng1VA1 = GetVolEnvSuppAngName("1", "V", "A", icount, 1);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VA0, 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1],fgkZp+dpar[2]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VA1, 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1],fgkZm-dpar[2]-spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport1V = GetVolAluAngSuppName("1", "V", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VA0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VA1,iVolNum++,3, spar);
// 1 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1H[1];
- spar[2]=kSizeSupport1H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HA[0], 0, true,
- TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,kZp+dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HA[1], 0, true,
- TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HA[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HA[1],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1H[1];
+ spar[2]=fgkSizeSupport1H[2];
+ TString volEnvSuppAng1HA0 = GetVolEnvSuppAngName("1", "H", "A", icount, 0);
+ TString volEnvSuppAng1HA1 = GetVolEnvSuppAngName("1", "H", "A", icount, 1);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HA0, 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,fgkZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HA1, 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,fgkZm-(dpar[2]-spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport1H = GetVolAluAngSuppName("1", "H", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HA0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HA1,iVolNum++,3, spar);
// gas pipe (low)
- ppar[0]=kSizeGasPipe[0];
- ppar[1]=kSizeGasPipe[1];
- ppar[2]=dpar[0];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1A[0], 0, true,
- TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1A[1], 0, true,
- TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1A[0],iVolNum++,3, ppar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1A[1],iVolNum++,3, ppar);
+ ppar[0]=fgkSizeGasPipe[0];
+ ppar[1]=fgkSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ TString volEnvInoxGasPipe1A0 = GetVolEnvInoxGasPipeName("1", "A", icount, 0);
+ TString volEnvInoxGasPipe1A1 = GetVolEnvInoxGasPipeName("1", "A", icount, 1);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1A0, 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave-fgkOffsetGasPipe,fgkZp),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1A1, 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave-fgkOffsetGasPipe,fgkZm),fRsupportpipe);
+ TString volInoxGasPipe = GetVolumeName("volInoxGasPipe", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1A0,iVolNum++,3, ppar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1A1,iVolNum++,3, ppar);
// 2 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2V[1];
- spar[2]=kSizeSupport2V[2];
- sparysave=spar[1]+kSizeSupport2H[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VA[0], 0, true,
- TGeoTranslation(xEnv,yEnvP-dpar[1],kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VA[1], 0, true,
- TGeoTranslation(-xEnv,yEnvM-dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VA[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VA[1],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2V[1];
+ spar[2]=fgkSizeSupport2V[2];
+ sparysave=spar[1]+fgkSizeSupport2H[1];
+ TString volEnvSuppAng2VA0 = GetVolEnvSuppAngName("2", "V", "A", icount, 0);
+ TString volEnvSuppAng2VA1 = GetVolEnvSuppAngName("2", "V", "A", icount, 1);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VA0, 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1],fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VA1, 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1],-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport2V = GetVolAluAngSuppName("2", "V", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VA0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VA1,iVolNum++,3, spar);
// 2 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2H[1];
- spar[2]=kSizeSupport2H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HA[0], 0, true,
- TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HA[1], 0, true,
- TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HA[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HA[1],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2H[1];
+ spar[2]=fgkSizeSupport2H[2];
+ TString volEnvSuppAng2HA0 = GetVolEnvSuppAngName("2", "H", "A", icount, 0);
+ TString volEnvSuppAng2HA1 = GetVolEnvSuppAngName("2", "H", "A", icount, 1);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HA0, 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HA1, 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport2H = GetVolAluAngSuppName("2", "H", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HA0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HA1,iVolNum++,3, spar);
// 3 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1V[1];
- spar[2]=kSizeSupport1V[2];
- sparysave=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VA[0], 0, true,
- TGeoTranslation(xEnv,yEnvP+dpar[1],kZp+dpar[2]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VA[1], 0, true,
- TGeoTranslation(-xEnv,yEnvM+dpar[1],kZm-dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VA[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VA[1],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1V[1];
+ spar[2]=fgkSizeSupport1V[2];
+ sparysave=spar[1];
+ TString volEnvSuppAng3VA0 = GetVolEnvSuppAngName("3", "V", "A", icount, 0);
+ TString volEnvSuppAng3VA1 = GetVolEnvSuppAngName("3", "V", "A", icount, 1);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VA0, 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1],fgkZp+dpar[2]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VA1, 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1],fgkZm-dpar[2]-spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport3V = GetVolAluAngSuppName("3", "V", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VA0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VA1,iVolNum++,3, spar);
// 3 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1H[1];
- spar[2]=kSizeSupport1H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HA[0], 0, true,
- TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,kZp+dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HA[1], 0, true,
- TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HA[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HA[1],iVolNum++,3, spar);
-
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1H[1];
+ spar[2]=fgkSizeSupport1H[2];
+ TString volEnvSuppAng3HA0 = GetVolEnvSuppAngName("3", "H", "A", icount, 0);
+ TString volEnvSuppAng3HA1 = GetVolEnvSuppAngName("3", "H", "A", icount, 1);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HA0, 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,fgkZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HA1, 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,fgkZm-(dpar[2]-spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport3H = GetVolAluAngSuppName("3", "H", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HA0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HA1,iVolNum++,3, spar);
+
// gas pipe (high)
- ppar[0]=kSizeGasPipe[0];
- ppar[1]=kSizeGasPipe[1];
- ppar[2]=dpar[0];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2A[0], 0, true,
- TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2A[1], 0, true,
- TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2A[0],iVolNum++,3, ppar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2A[1],iVolNum++,3, ppar);
+ ppar[0]=fgkSizeGasPipe[0];
+ ppar[1]=fgkSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ TString volEnvInoxGasPipe2A0 = GetVolEnvInoxGasPipeName("2", "A", icount, 0);
+ TString volEnvInoxGasPipe2A1 = GetVolEnvInoxGasPipeName("2", "A", icount, 1);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2A0, 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave+fgkOffsetGasPipe,fgkZp),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2A1, 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave+fgkOffsetGasPipe,fgkZm),fRsupportpipe);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2A0,iVolNum++,3, ppar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2A1,iVolNum++,3, ppar);
// 4 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2V[1];
- spar[2]=kSizeSupport2V[2];
- sparysave=spar[1]+kSizeSupport2H[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VA[0], 0, true,
- TGeoTranslation(xEnv,yEnvP+dpar[1],kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VA[1], 0, true,
- TGeoTranslation(-xEnv,yEnvM+dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VA[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VA[1],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2V[1];
+ spar[2]=fgkSizeSupport2V[2];
+ sparysave=spar[1]+fgkSizeSupport2H[1];
+ TString volEnvSuppAng4VA0 = GetVolEnvSuppAngName("4", "V", "A", icount, 0);
+ TString volEnvSuppAng4VA1 = GetVolEnvSuppAngName("4", "V", "A", icount, 1);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VA0, 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1],fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VA1, 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1],-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport4V = GetVolAluAngSuppName("4", "V", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VA0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VA1,iVolNum++,3, spar);
// 4 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2H[1];
- spar[2]=kSizeSupport2H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HA[0], 0, true,
- TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HA[1], 0, true,
- TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HA[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HA[1],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2H[1];
+ spar[2]=fgkSizeSupport2H[2];
+ TString volEnvSuppAng4HA0 = GetVolEnvSuppAngName("4", "H", "A", icount, 0);
+ TString volEnvSuppAng4HA1 = GetVolEnvSuppAngName("4", "H", "A", icount, 1);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HA0, 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HA1, 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport4H = GetVolAluAngSuppName("4", "H", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HA0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HA1,iVolNum++,3, spar);
// X horizontal
- spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
- spar[1]=kSizeSupportXH[1];
- spar[2]=kSizeSupportXH[2];
- Float_t sparysavex=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHA[0], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0,kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHA[1], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHA[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHA[1],iVolNum++,3, spar);
+ spar[0]=(fgkYVSup[3]-fgkYVSup[0])/2.*zRatio;
+ spar[1]=fgkSizeSupportXH[1];
+ spar[2]=fgkSizeSupportXH[2];
+ Float_t sparysavex=spar[1];
+ TString volEnvSuppAngXHA0 = GetVolEnvSuppAngName("X", "H", "A", icount, 0);
+ TString volEnvSuppAngXHA1 = GetVolEnvSuppAngName("X", "H", "A", icount, 1);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHA0, 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0,
+ fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHA1, 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0,
+ -(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupportXH = GetVolAluAngSuppName("X", "H", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHA0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHA1,iVolNum++,3, spar);
// X vertical
- spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
- spar[1]=kSizeSupportXV[1];
- spar[2]=kSizeSupportXV[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVA[0], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVA[1], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVA[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVA[1],iVolNum++,3, spar);
+ spar[0]=(fgkYVSup[3]-fgkYVSup[0])/2.*zRatio;
+ spar[1]=fgkSizeSupportXV[1];
+ spar[2]=fgkSizeSupportXV[2];
+ TString volEnvSuppAngXVA0 = GetVolEnvSuppAngName("X", "V", "A", icount, 0);
+ TString volEnvSuppAngXVA1 = GetVolEnvSuppAngName("X", "V", "A", icount, 1);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVA0, 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],
+ fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVA1, 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],
+ -(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupportXV = GetVolAluAngSuppName("X", "V", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVA0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVA1,iVolNum++,3, spar);
+
+ // keep values of yEnvP, yEnvM
+ fYEnvPsave = yEnvP;
+ fYEnvMsave = yEnvM;
+}
+//______________________________________________________________________________
+void AliMUONTriggerGeometryBuilder::BuildChamberTypeB(Int_t& iVolNum, Int_t icount)
+{
+// ratio of zpos1m/zpos1p and inverse for first plane
+ Float_t zpos1= AliMUONConstants::DefaultChamberZ(10);
+ Float_t zmp=(zpos1-3.6)/(zpos1+3.6);
+ Float_t zpm=1./zmp;
+
// chamber type B (plus envelope chambers B & C)
- xEnv = (kDXZERO+kXMAX/2.)*zRatio;
- yEnvPsave = yEnvP;
- yEnvMsave = yEnvM;
- yEnvP = (yEnvMsave + kYMIN * zRatio ) * zpm + kYMIN * zRatio;
- yEnvM = (yEnvPsave + kYMIN * zRatio ) * zmp + kYMIN * zRatio;
- dpar[0] = ((kXMAX-kXMIN)/2.) * zRatio;
- dpar[1] = ((kYMAX-kYMIN)/2.) * zRatio;
- Float_t dysave = dpar[1];
- Float_t dxsave = dpar[0];
- xpos = kXMIN/2. * zRatio;
- ypos = (kYMIN - kYMIN/4.) * zRatio;
- Float_t xpossave = xpos;
-
- detElemId = (10+icount+1)*100+17;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[3], detElemId, true, TGeoTranslation( xEnv,-yEnvM,kZm));
- detElemId = (10+icount+1)*100+1;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[5], detElemId, true, TGeoTranslation( xEnv, yEnvM,kZm));
- detElemId = (10+icount+1)*100+10;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[12], detElemId, true, TGeoTranslation(-xEnv,-yEnvP,kZp),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- detElemId = (10+icount+1)*100+8;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[14], detElemId, true, TGeoTranslation(-xEnv, yEnvP,kZp),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[3],iVolNum++,TGeoTranslation(xpos, ypos,0.),3,dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[5],iVolNum++,TGeoTranslation(xpos,-ypos,0.),3,dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[12],iVolNum++,TGeoTranslation(xpos, ypos,0.),3,dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[14],iVolNum++,TGeoTranslation(xpos,-ypos,0.),3,dpar);
-
-
-// chamber type C (note: same Z than type B)
- dpar[0] = (kXMAX/2)*zRatio;
- dpar[1] = (kYMAX/2)*zRatio;
- xpos = 0.;
- ypos = ((kYMAX - kYMIN)/2.) * zRatio;
+ Double_t dpar[3];
+ Double_t spar[3];
+ Double_t ppar[3];
+
+// chamber type B
+ Float_t zRatio = AliMUONConstants::DefaultRatioTriggerChamber(icount);
+ Float_t xEnv = (fgkDXZERO+fgkXMAX/2.)*zRatio;
+ Float_t yEnvP = 0;
+ Float_t yEnvM = 0;
+ yEnvP = (fYEnvMsave + fgkYMIN * zRatio ) * zpm + fgkYMIN * zRatio;
+ yEnvM = (fYEnvPsave + fgkYMIN * zRatio ) * zmp + fgkYMIN * zRatio;
+ dpar[0] = ((fgkXMAX-fgkXMIN)/2.) * zRatio;
+ dpar[1] = ((fgkYMAX-fgkYMIN)/2.) * zRatio;
+ dpar[2] = 0.4;
+ fDYsave = dpar[1];
+ fDXsave = dpar[0];
+ Float_t xpos = fgkXMIN/2. * zRatio;
+ Float_t ypos = (fgkYMIN - fgkYMIN/4.) * zRatio;
+ Float_t xpossave = xpos;
+
+ Int_t detElemId = (10+icount+1)*100+17;
+ TString volEnv3 = GetVolEnvName(icount, 3);
+ TString volEnv5 = GetVolEnvName(icount, 5);
+ TString volEnv12 = GetVolEnvName(icount, 12);
+ TString volEnv14 = GetVolEnvName(icount, 14);
+ TString volAlu = GetVolumeName("volAlu", icount);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnv3, detElemId, true,
+ TGeoTranslation(xEnv,-yEnvM,fgkZm));
+ detElemId = (10+icount+1)*100+1;
+ GetEnvelopes(16+icount)->AddEnvelope(volEnv5, detElemId, true,
+ TGeoTranslation( xEnv, yEnvM,fgkZm));
+ detElemId = (10+icount+1)*100+10;
+ GetEnvelopes(16+icount)->AddEnvelope(volEnv12, detElemId, true,
+ TGeoTranslation(-xEnv,-yEnvP,fgkZp),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ detElemId = (10+icount+1)*100+8;
+ GetEnvelopes(16+icount)->AddEnvelope(volEnv14, detElemId, true,
+ TGeoTranslation(-xEnv, yEnvP,fgkZp),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAlu,volEnv3,iVolNum++,TGeoTranslation(xpos, ypos,0.),3,dpar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAlu,volEnv5,iVolNum++,TGeoTranslation(xpos,-ypos,0.),3,dpar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAlu,volEnv12,iVolNum++,TGeoTranslation(xpos, ypos,0.),3,dpar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAlu,volEnv14,iVolNum++,TGeoTranslation(xpos,-ypos,0.),3,dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[3],iVolNum++,TGeoTranslation(xpos,-ypos,0.),3,dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[5],iVolNum++,TGeoTranslation(xpos, ypos,0.),3,dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[12],iVolNum++,TGeoTranslation(xpos,-ypos,0.),3,dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[14],iVolNum++,TGeoTranslation(xpos, ypos,0.),3,dpar);
+// chamber type C (note: same Z than type B)
+ dpar[0] = (fgkXMAX/2)*zRatio;
+ dpar[1] = (fgkYMAX/2)*zRatio;
+ xpos = 0.;
+ ypos = ((fgkYMAX - fgkYMIN)/2.) * zRatio;
+
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAlu,volEnv3,iVolNum++,TGeoTranslation(xpos,-ypos,0.),3,dpar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAlu,volEnv5,iVolNum++,TGeoTranslation(xpos, ypos,0.),3,dpar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAlu,volEnv12,iVolNum++,TGeoTranslation(xpos,-ypos,0.),3,dpar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAlu,volEnv14,iVolNum++,TGeoTranslation(xpos, ypos,0.),3,dpar);
// horizontal cable support chamber type B+C
- spar[0]=dpar[0]-kYVSup[0]/2.;
- spar[1]=kSizeSupportCable[1];
- spar[2]=kSizeSupportCable[2];
- for(Int_t in=0;in<3;in++){
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHBC[in], 0, true, TGeoTranslation(xEnv+kYVSup[0]/2.*zRatio,-(yEnvM+(kYMAX-kYMIN/2.*zRatio)/2.*(in-1)),kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHBC[in+3], 0, true, TGeoTranslation(xEnv+kYVSup[0]/2.*zRatio, yEnvM+(kYMAX-kYMIN/2.*zRatio)/2.*(in-1),kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHBC[in+6], 0, true, TGeoTranslation(-(xEnv+kYVSup[0]/2.*zRatio),-(yEnvP+(kYMAX-kYMIN/2.*zRatio)/2.*(in-1)),-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHBC[in+9], 0, true, TGeoTranslation(-(xEnv+kYVSup[0]/2.*zRatio), yEnvP+(kYMAX-kYMIN/2.*zRatio)/2.*(in-1),-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- }
- for(Int_t ii=0;ii<12;ii++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluSupportH,volEnvSupportHBC[ii],iVolNum++,3, spar);
+ char volEnvSupportHBC[12][8];
+ for(Int_t jj=0;jj<2;jj++){
+ for(Int_t ii=0;ii<6;ii++){
+ snprintf(volEnvSupportHBC[6*jj+ii],8,"SA%dHB%d",icount+1,6*jj+ii);
+ }
+ }
+
+ spar[0]=dpar[0]-fgkYVSup[0]/2.;
+ spar[1]=fgkSizeSupportCable[1];
+ spar[2]=fgkSizeSupportCable[2];
+ for(Int_t in=0;in<3;in++){
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHBC[in], 0, true,
+ TGeoTranslation(xEnv+fgkYVSup[0]/2.*zRatio,-(yEnvM+(fgkYMAX-fgkYMIN/2.*zRatio)/2.*(in-1)),
+ fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHBC[in+3], 0, true,
+ TGeoTranslation(xEnv+fgkYVSup[0]/2.*zRatio, yEnvM+(fgkYMAX-fgkYMIN/2.*zRatio)/2.*(in-1),
+ fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHBC[in+6], 0, true,
+ TGeoTranslation(-(xEnv+fgkYVSup[0]/2.*zRatio),-(yEnvP+(fgkYMAX-fgkYMIN/2.*zRatio)/2.*(in-1)),
+ -(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHBC[in+9], 0, true,
+ TGeoTranslation(-(xEnv+fgkYVSup[0]/2.*zRatio), yEnvP+(fgkYMAX-fgkYMIN/2.*zRatio)/2.*(in-1),
+ -(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ }
+ for(Int_t ii=0;ii<12;ii++) {
+ TString volAluSupportH = GetVolumeName("volAluSupportH", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluSupportH,volEnvSupportHBC[ii],iVolNum++,3, spar);
+ }
// angular supports chamber type B and C
// C
// 1 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1V[1];
- spar[2]=kSizeSupport1V[2];
- sparysave=spar[1];
-
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VBC[0], 0, true,
- TGeoTranslation(xEnv,-yEnvM-dpar[1]-dysave,kZm-dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VBC[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvP-dpar[1]-dysave,kZp+dpar[2]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VBC[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VBC[2],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1V[1];
+ spar[2]=fgkSizeSupport1V[2];
+ Float_t sparysave=spar[1];
+
+ TString volEnvSuppAng1VBC0 = GetVolEnvSuppAngName("1", "V", "B", icount, 0);
+ TString volEnvSuppAng1VBC2 = GetVolEnvSuppAngName("1", "V", "B", icount, 2);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VBC0, 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1]-fDYsave,fgkZm-dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VBC2, 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1]-fDYsave,fgkZp+dpar[2]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport1V = GetVolAluAngSuppName("1", "V", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VBC0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VBC2,iVolNum++,3, spar);
// 1 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1H[1];
- spar[2]=kSizeSupport1H[2];
-
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HBC[0], 0, true,
- TGeoTranslation(xEnv,-yEnvM-dpar[1]-dysave-sparysave,kZm-(dpar[2]-spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HBC[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvP-dpar[1]-dysave-sparysave,kZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HBC[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HBC[2],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1H[1];
+ spar[2]=fgkSizeSupport1H[2];
+
+ TString volEnvSuppAng1HBC0 = GetVolEnvSuppAngName("1", "H", "B", icount, 0);
+ TString volEnvSuppAng1HBC2 = GetVolEnvSuppAngName("1", "H", "B", icount, 2);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HBC0, 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1]-fDYsave-sparysave,fgkZm-(dpar[2]-spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HBC2, 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1]-fDYsave-sparysave,fgkZp+dpar[2]-spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport1H = GetVolAluAngSuppName("1", "H", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HBC0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HBC2,iVolNum++,3, spar);
// gas pipe (low)
- ppar[0]=kSizeGasPipe[0];
- ppar[1]=kSizeGasPipe[1];
- ppar[2]=dpar[0];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1BC[0], 0, true,
- TGeoTranslation(xEnv,-yEnvM-dpar[1]-dysave-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1BC[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvP-dpar[1]-dysave-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1BC[0],iVolNum++,3, ppar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1BC[2],iVolNum++,3, ppar);
+ ppar[0]=fgkSizeGasPipe[0];
+ ppar[1]=fgkSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ TString volEnvInoxGasPipe1BC0 = GetVolEnvInoxGasPipeName("1", "BC", icount, 0);
+ TString volEnvInoxGasPipe1BC2 = GetVolEnvInoxGasPipeName("1", "BC", icount, 2);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1BC0, 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1]-fDYsave-sparysave-fgkOffsetGasPipe,fgkZm),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1BC2, 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1]-fDYsave-sparysave-fgkOffsetGasPipe,fgkZp),fRsupportpipe);
+ TString volInoxGasPipe = GetVolumeName("volInoxGasPipe", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1BC0,iVolNum++,3, ppar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1BC2,iVolNum++,3, ppar);
// 2 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2V[1];
- spar[2]=kSizeSupport2V[2];
- sparysave=spar[1]+kSizeSupport2H[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VBC[0], 0, true,
- TGeoTranslation(xEnv,-yEnvM-dpar[1]-dysave,-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VBC[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvP-dpar[1]-dysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VBC[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VBC[2],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2V[1];
+ spar[2]=fgkSizeSupport2V[2];
+ sparysave=spar[1]+fgkSizeSupport2H[1];
+ TString volEnvSuppAng2VBC0 = GetVolEnvSuppAngName("2", "V", "B", icount, 0);
+ TString volEnvSuppAng2VBC2 = GetVolEnvSuppAngName("2", "V", "B", icount, 2);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VBC0, 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1]-fDYsave,-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VBC2, 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1]-fDYsave,fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport2V = GetVolAluAngSuppName("2", "V", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VBC0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VBC2,iVolNum++,3, spar);
// 2 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2H[1];
- spar[2]=kSizeSupport2H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HBC[0], 0, true,
- TGeoTranslation(xEnv,-yEnvM-dpar[1]-dysave-sparysave,-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HBC[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvP-dpar[1]-dysave-sparysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HBC[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HBC[2],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2H[1];
+ spar[2]=fgkSizeSupport2H[2];
+ TString volEnvSuppAng2HBC0 = GetVolEnvSuppAngName("2", "H", "B", icount, 0);
+ TString volEnvSuppAng2HBC2 = GetVolEnvSuppAngName("2", "H", "B", icount, 2);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HBC0, 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1]-fDYsave-sparysave,-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HBC2, 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1]-fDYsave-sparysave,fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport2H = GetVolAluAngSuppName("2", "H", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HBC0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HBC2,iVolNum++,3, spar);
// 3 vertical
- spar[0]=dxsave-kAvoidExtrusion;
- spar[1]=kSizeSupport1V[1];
- spar[2]=kSizeSupport1V[2];
- sparysave=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VBC[0], 0, true,
- TGeoTranslation(xEnv+xpossave,-yEnvM+dpar[1]+dysave,kZm-dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VBC[2], 0, true,
- TGeoTranslation(-xEnv-xpossave,-yEnvP+dpar[1]+dysave,kZp+dpar[2]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VBC[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VBC[2],iVolNum++,3, spar);
+ spar[0]=fDXsave-fgkAvoidExtrusion;
+ spar[1]=fgkSizeSupport1V[1];
+ spar[2]=fgkSizeSupport1V[2];
+ sparysave=spar[1];
+ TString volEnvSuppAng3VBC0 = GetVolEnvSuppAngName("3", "V", "B", icount, 0);
+ TString volEnvSuppAng3VBC2 = GetVolEnvSuppAngName("3", "V", "B", icount, 2);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VBC0, 0, true,
+ TGeoTranslation(xEnv+xpossave,-yEnvM+dpar[1]+fDYsave,fgkZm-dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VBC2, 0, true,
+ TGeoTranslation(-xEnv-xpossave,-yEnvP+dpar[1]+fDYsave,fgkZp+dpar[2]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport3V = GetVolAluAngSuppName("3", "V", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VBC0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VBC2,iVolNum++,3, spar);
// 3 horizontal
- spar[0]=dxsave-kAvoidExtrusion;
- spar[1]=kSizeSupport1H[1];
- spar[2]=kSizeSupport1H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HBC[0], 0, true,
- TGeoTranslation(xEnv+xpossave,-yEnvM+dpar[1]+dysave+sparysave,kZm-(dpar[2]-spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HBC[2], 0, true,
- TGeoTranslation(-xEnv-xpossave,-yEnvP+dpar[1]+dysave+sparysave,kZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HBC[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HBC[2],iVolNum++,3, spar);
-
+ spar[0]=fDXsave-fgkAvoidExtrusion;
+ spar[1]=fgkSizeSupport1H[1];
+ spar[2]=fgkSizeSupport1H[2];
+ TString volEnvSuppAng3HBC0 = GetVolEnvSuppAngName("3", "H", "B", icount, 0);
+ TString volEnvSuppAng3HBC2 = GetVolEnvSuppAngName("3", "H", "B", icount, 2);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HBC0, 0, true,
+ TGeoTranslation(xEnv+xpossave,-yEnvM+dpar[1]+fDYsave+sparysave,fgkZm-(dpar[2]-spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HBC2, 0, true,
+ TGeoTranslation(-xEnv-xpossave,-yEnvP+dpar[1]+fDYsave+sparysave,fgkZp+dpar[2]-spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport3H = GetVolAluAngSuppName("3", "H", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HBC0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HBC2,iVolNum++,3, spar);
+
// gas pipe (high)
- ppar[0]=kSizeGasPipe[0];
- ppar[1]=kSizeGasPipe[1];
- ppar[2]=dxsave-kAvoidExtrusion;
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2BC[0], 0, true,
- TGeoTranslation(xEnv+xpossave,-yEnvM+dpar[1]+dysave+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2BC[2], 0, true,
- TGeoTranslation(-xEnv-xpossave,-yEnvP+dpar[1]+dysave+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2BC[0],iVolNum++,3, ppar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2BC[2],iVolNum++,3, ppar);
+ ppar[0]=fgkSizeGasPipe[0];
+ ppar[1]=fgkSizeGasPipe[1];
+ ppar[2]=fDXsave-fgkAvoidExtrusion;
+ TString volEnvInoxGasPipe2BC0 = GetVolEnvInoxGasPipeName("2", "BC", icount, 0);
+ TString volEnvInoxGasPipe2BC2 = GetVolEnvInoxGasPipeName("2", "BC", icount, 2);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2BC0, 0, true,
+ TGeoTranslation(xEnv+xpossave,-yEnvM+dpar[1]+fDYsave+sparysave+fgkOffsetGasPipe,fgkZm),
+ fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2BC2, 0, true,
+ TGeoTranslation(-xEnv-xpossave,-yEnvP+dpar[1]+fDYsave+sparysave+fgkOffsetGasPipe,fgkZp),
+ fRsupportpipe);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2BC0,iVolNum++,3, ppar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2BC2,iVolNum++,3, ppar);
// 4 vertical
- spar[0]=dxsave-kAvoidExtrusion;
- spar[1]=kSizeSupport2V[1];
- spar[2]=kSizeSupport2V[2];
- sparysave=spar[1]+kSizeSupport2H[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VBC[0], 0, true,
- TGeoTranslation(xEnv+xpossave,-yEnvM+dpar[1]+dysave,-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VBC[2], 0, true,
- TGeoTranslation(-xEnv-xpossave,-yEnvP+dpar[1]+dysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VBC[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VBC[2],iVolNum++,3, spar);
+ spar[0]=fDXsave-fgkAvoidExtrusion;
+ spar[1]=fgkSizeSupport2V[1];
+ spar[2]=fgkSizeSupport2V[2];
+ sparysave=spar[1]+fgkSizeSupport2H[1];
+ TString volEnvSuppAng4VBC0 = GetVolEnvSuppAngName("4", "V", "B", icount, 0);
+ TString volEnvSuppAng4VBC2 = GetVolEnvSuppAngName("4", "V", "B", icount, 2);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VBC0, 0, true,
+ TGeoTranslation(xEnv+xpossave,-yEnvM+dpar[1]+fDYsave,-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VBC2, 0, true,
+ TGeoTranslation(-xEnv-xpossave,-yEnvP+dpar[1]+fDYsave,fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport4V = GetVolAluAngSuppName("4", "V", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VBC0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VBC2,iVolNum++,3, spar);
// 4 horizontal
- spar[0]=dxsave-kAvoidExtrusion;
- spar[1]=kSizeSupport2H[1];
- spar[2]=kSizeSupport2H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HBC[0], 0, true,
- TGeoTranslation(xEnv+xpossave,-yEnvM+dpar[1]+dysave+sparysave,-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HBC[2], 0, true,
- TGeoTranslation(-xEnv-xpossave,-yEnvP+dpar[1]+dysave+sparysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HBC[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HBC[2],iVolNum++,3, spar);
+ spar[0]=fDXsave-fgkAvoidExtrusion;
+ spar[1]=fgkSizeSupport2H[1];
+ spar[2]=fgkSizeSupport2H[2];
+ TString volEnvSuppAng4HBC0 = GetVolEnvSuppAngName("4", "H", "B", icount, 0);
+ TString volEnvSuppAng4HBC2 = GetVolEnvSuppAngName("4", "H", "B", icount, 2);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HBC0, 0, true,
+ TGeoTranslation(xEnv+xpossave,-yEnvM+dpar[1]+fDYsave+sparysave,-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HBC2, 0, true,
+ TGeoTranslation(-xEnv-xpossave,-yEnvP+dpar[1]+fDYsave+sparysave,fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport4H = GetVolAluAngSuppName("4", "H", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HBC0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HBC2,iVolNum++,3, spar);
// X horizontal
- spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
- spar[1]=kSizeSupportXH[1];
- spar[2]=kSizeSupportXH[2];
- sparysavex=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHBC[0], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,-yEnvM+dpar[1]+dysave+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHBC[2], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),-yEnvP+dpar[1]+dysave+sparysave+1.0,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHBC[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHBC[2],iVolNum++,3, spar);
-
+ spar[0]=(fgkYVSup[3]-fgkYVSup[0])/2.*zRatio;
+ spar[1]=fgkSizeSupportXH[1];
+ spar[2]=fgkSizeSupportXH[2];
+ Float_t sparysavex=spar[1];
+ TString volEnvSuppAngXHBC0 = GetVolEnvSuppAngName("X", "H", "B", icount, 0);
+ TString volEnvSuppAngXHBC2 = GetVolEnvSuppAngName("X", "H", "B", icount, 2);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHBC0, 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,-yEnvM+dpar[1]+fDYsave+sparysave+1.0,
+ -(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHBC2, 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),-yEnvP+dpar[1]+fDYsave+sparysave+1.0,
+ fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupportXH = GetVolAluAngSuppName("X", "H", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHBC0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHBC2,iVolNum++,3, spar);
// X vertical
- spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
- spar[1]=kSizeSupportXV[1];
- spar[2]=kSizeSupportXV[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVBC[0], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,-yEnvM+dpar[1]+dysave+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVBC[2], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),-yEnvP+dpar[1]+dysave+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVBC[0],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVBC[2],iVolNum++,3, spar);
+ spar[0]=(fgkYVSup[3]-fgkYVSup[0])/2.*zRatio;
+ spar[1]=fgkSizeSupportXV[1];
+ spar[2]=fgkSizeSupportXV[2];
+ TString volEnvSuppAngXVBC0 = GetVolEnvSuppAngName("X", "V", "B", icount, 0);
+ TString volEnvSuppAngXVBC2 = GetVolEnvSuppAngName("X", "V", "B", icount, 2);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVBC0, 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,
+ -yEnvM+dpar[1]+fDYsave+sparysave+1.0+sparysavex+spar[1],
+ -(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVBC2, 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),
+ -yEnvP+dpar[1]+fDYsave+sparysave+1.0+sparysavex+spar[1],
+ fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupportXV = GetVolAluAngSuppName("X", "V", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVBC0,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVBC2,iVolNum++,3, spar);
// B
// 1 vertical
- spar[0]=dxsave-kAvoidExtrusion;
- spar[1]=kSizeSupport1V[1];
- spar[2]=kSizeSupport1V[2];
- sparysave=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VBC[1], 0, true,
- TGeoTranslation(xEnv+xpossave,yEnvM-dpar[1]-dysave,kZm-dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VBC[3], 0, true,
- TGeoTranslation(-xEnv-xpossave,yEnvP-dpar[1]-dysave,kZp+dpar[2]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VBC[1],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VBC[3],iVolNum++,3, spar);
+ spar[0]=fDXsave-fgkAvoidExtrusion;
+ spar[1]=fgkSizeSupport1V[1];
+ spar[2]=fgkSizeSupport1V[2];
+ sparysave=spar[1];
+ TString volEnvSuppAng1VBC1 = GetVolEnvSuppAngName("1", "V", "B", icount, 1);
+ TString volEnvSuppAng1VBC3 = GetVolEnvSuppAngName("1", "V", "B", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VBC1, 0, true,
+ TGeoTranslation(xEnv+xpossave,yEnvM-dpar[1]-fDYsave,fgkZm-dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VBC3, 0, true,
+ TGeoTranslation(-xEnv-xpossave,yEnvP-dpar[1]-fDYsave,fgkZp+dpar[2]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ //TString volAluAngSupport1V = GetVolAluAngSuppName("1", "V", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VBC1,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VBC3,iVolNum++,3, spar);
// 1 horizontal
- spar[0]=dxsave-kAvoidExtrusion;
- spar[1]=kSizeSupport1H[1];
- spar[2]=kSizeSupport1H[2];
-
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HBC[1], 0, true,
- TGeoTranslation(xEnv+xpossave,yEnvM-dpar[1]-dysave-sparysave,kZm-(dpar[2]-spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HBC[3], 0, true,
- TGeoTranslation(-xEnv-xpossave,yEnvP-dpar[1]-dysave-sparysave,kZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HBC[1],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HBC[3],iVolNum++,3, spar);
+ spar[0]=fDXsave-fgkAvoidExtrusion;
+ spar[1]=fgkSizeSupport1H[1];
+ spar[2]=fgkSizeSupport1H[2];
+
+ TString volEnvSuppAng1HBC1 = GetVolEnvSuppAngName("1", "H", "B", icount, 1);
+ TString volEnvSuppAng1HBC3 = GetVolEnvSuppAngName("1", "H", "B", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HBC1, 0, true,
+ TGeoTranslation(xEnv+xpossave,yEnvM-dpar[1]-fDYsave-sparysave,fgkZm-(dpar[2]-spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HBC3, 0, true,
+ TGeoTranslation(-xEnv-xpossave,yEnvP-dpar[1]-fDYsave-sparysave,fgkZp+dpar[2]-spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ //TString volAluAngSupport1H = GetVolAluAngSuppName("1", "H", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HBC1,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HBC3,iVolNum++,3, spar);
// gas pipe (low)
- ppar[0]=kSizeGasPipe[0];
- ppar[1]=kSizeGasPipe[1];
- ppar[2]=dxsave-kAvoidExtrusion;
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1BC[1], 0, true,
- TGeoTranslation(xEnv+xpossave,yEnvM-dpar[1]-dysave-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1BC[3], 0, true,
- TGeoTranslation(-xEnv-xpossave,yEnvP-dpar[1]-dysave-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1BC[1],iVolNum++,3, ppar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1BC[3],iVolNum++,3, ppar);
+ ppar[0]=fgkSizeGasPipe[0];
+ ppar[1]=fgkSizeGasPipe[1];
+ ppar[2]=fDXsave-fgkAvoidExtrusion;
+ TString volEnvInoxGasPipe1BC1 = GetVolEnvInoxGasPipeName("1", "BC", icount, 1);
+ TString volEnvInoxGasPipe1BC3 = GetVolEnvInoxGasPipeName("1", "BC", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1BC1, 0, true,
+ TGeoTranslation(xEnv+xpossave,yEnvM-dpar[1]-fDYsave-sparysave-fgkOffsetGasPipe,fgkZm),
+ fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1BC3, 0, true,
+ TGeoTranslation(-xEnv-xpossave,yEnvP-dpar[1]-fDYsave-sparysave-fgkOffsetGasPipe,fgkZp),
+ fRsupportpipe);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1BC1,iVolNum++,3, ppar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1BC3,iVolNum++,3, ppar);
// 2 vertical
- spar[0]=dxsave-kAvoidExtrusion;
- spar[1]=kSizeSupport2V[1];
- spar[2]=kSizeSupport2V[2];
- sparysave=spar[1]+kSizeSupport2H[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VBC[1], 0, true,
- TGeoTranslation(xEnv+xpossave,yEnvM-dpar[1]-dysave,-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VBC[3], 0, true,
- TGeoTranslation(-xEnv-xpossave,yEnvP-dpar[1]-dysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VBC[1],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VBC[3],iVolNum++,3, spar);
-
+ spar[0]=fDXsave-fgkAvoidExtrusion;
+ spar[1]=fgkSizeSupport2V[1];
+ spar[2]=fgkSizeSupport2V[2];
+ sparysave=spar[1]+fgkSizeSupport2H[1];
+ TString volEnvSuppAng2VBC1 = GetVolEnvSuppAngName("2", "V", "B", icount, 1);
+ TString volEnvSuppAng2VBC3 = GetVolEnvSuppAngName("2", "V", "B", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VBC1, 0, true,
+ TGeoTranslation(xEnv+xpossave,yEnvM-dpar[1]-fDYsave,-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VBC3, 0, true,
+ TGeoTranslation(-xEnv-xpossave,yEnvP-dpar[1]-fDYsave,fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ //TString volAluAngSupport2V = GetVolAluAngSuppName("2", "V", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VBC1,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VBC3,iVolNum++,3, spar);
// 2 horizontal
- spar[0]=dxsave-kAvoidExtrusion;
- spar[1]=kSizeSupport2H[1];
- spar[2]=kSizeSupport2H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HBC[1], 0, true,
- TGeoTranslation(xEnv+xpossave,yEnvM-dpar[1]-dysave-sparysave,-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HBC[3], 0, true,
- TGeoTranslation(-xEnv-xpossave,yEnvP-dpar[1]-dysave-sparysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HBC[1],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HBC[3],iVolNum++,3, spar);
+ spar[0]=fDXsave-fgkAvoidExtrusion;
+ spar[1]=fgkSizeSupport2H[1];
+ spar[2]=fgkSizeSupport2H[2];
+ TString volEnvSuppAng2HBC1 = GetVolEnvSuppAngName("2", "H", "B", icount, 1);
+ TString volEnvSuppAng2HBC3 = GetVolEnvSuppAngName("2", "H", "B", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HBC1, 0, true,
+ TGeoTranslation(xEnv+xpossave,yEnvM-dpar[1]-fDYsave-sparysave,-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HBC3, 0, true,
+ TGeoTranslation(-xEnv-xpossave,yEnvP-dpar[1]-fDYsave-sparysave,fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ //TString volAluAngSupport2H = GetVolAluAngSuppName("2", "H", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HBC1,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HBC3,iVolNum++,3, spar);
// 3 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1V[1];
- spar[2]=kSizeSupport1V[2];
- sparysave=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VBC[1], 0, true,
- TGeoTranslation(xEnv,yEnvM+dpar[1]+dysave,kZm-dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VBC[3], 0, true,
- TGeoTranslation(-xEnv,yEnvP+dpar[1]+dysave,kZp+dpar[2]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VBC[1],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VBC[3],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1V[1];
+ spar[2]=fgkSizeSupport1V[2];
+ sparysave=spar[1];
+ TString volEnvSuppAng3VBC1 = GetVolEnvSuppAngName("3", "V", "B", icount, 1);
+ TString volEnvSuppAng3VBC3 = GetVolEnvSuppAngName("3", "V", "B", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VBC1, 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1]+fDYsave,fgkZm-dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VBC3, 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1]+fDYsave,fgkZp+dpar[2]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ //TString volAluAngSupport3V = GetVolAluAngSuppName("3", "V", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VBC1,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VBC3,iVolNum++,3, spar);
// 3 horizontal
- spar[1]=kSizeSupport1H[1];
- spar[2]=kSizeSupport1H[2];
-
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HBC[1], 0, true,
- TGeoTranslation(xEnv,yEnvM+dpar[1]+dysave+sparysave,kZm-(dpar[2]-spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HBC[3], 0, true,
- TGeoTranslation(-xEnv,yEnvP+dpar[1]+dysave+sparysave,kZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HBC[1],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HBC[3],iVolNum++,3, spar);
+ spar[1]=fgkSizeSupport1H[1];
+ spar[2]=fgkSizeSupport1H[2];
+
+ TString volEnvSuppAng3HBC1 = GetVolEnvSuppAngName("3", "H", "B", icount, 1);
+ TString volEnvSuppAng3HBC3 = GetVolEnvSuppAngName("3", "H", "B", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HBC1, 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1]+fDYsave+sparysave,fgkZm-(dpar[2]-spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HBC3, 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1]+fDYsave+sparysave,fgkZp+dpar[2]-spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HBC1,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HBC3,iVolNum++,3, spar);
// gas pipe (high)
- ppar[0]=kSizeGasPipe[0];
- ppar[1]=kSizeGasPipe[1];
- ppar[2]=dpar[0];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2BC[1], 0, true,
- TGeoTranslation(xEnv,yEnvM+dpar[1]+dysave+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2BC[3], 0, true,
- TGeoTranslation(-xEnv,yEnvP+dpar[1]+dysave+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2BC[1],iVolNum++,3, ppar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2BC[3],iVolNum++,3, ppar);
+ ppar[0]=fgkSizeGasPipe[0];
+ ppar[1]=fgkSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ TString volEnvInoxGasPipe2BC1 = GetVolEnvInoxGasPipeName("2", "BC", icount, 1);
+ TString volEnvInoxGasPipe2BC3 = GetVolEnvInoxGasPipeName("2", "BC", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2BC1, 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1]+fDYsave+sparysave+fgkOffsetGasPipe,fgkZm),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2BC3, 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1]+fDYsave+sparysave+fgkOffsetGasPipe,fgkZp),fRsupportpipe);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2BC1,iVolNum++,3, ppar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2BC3,iVolNum++,3, ppar);
// 4 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2V[1];
- spar[2]=kSizeSupport2V[2];
- sparysave=spar[1]+kSizeSupport2H[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VBC[1], 0, true,
- TGeoTranslation(xEnv,yEnvM+dpar[1]+dysave,-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VBC[3], 0, true,
- TGeoTranslation(-xEnv,yEnvP+dpar[1]+dysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VBC[1],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VBC[3],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2V[1];
+ spar[2]=fgkSizeSupport2V[2];
+ sparysave=spar[1]+fgkSizeSupport2H[1];
+ TString volEnvSuppAng4VBC1 = GetVolEnvSuppAngName("4", "V", "B", icount, 1);
+ TString volEnvSuppAng4VBC3 = GetVolEnvSuppAngName("4", "V", "B", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VBC1, 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1]+fDYsave,-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VBC3, 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1]+fDYsave,fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VBC1,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VBC3,iVolNum++,3, spar);
// 4 horizontal
- spar[1]=kSizeSupport2H[1];
- spar[2]=kSizeSupport2H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HBC[1], 0, true,
- TGeoTranslation(xEnv,yEnvM+dpar[1]+dysave+sparysave,-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HBC[3], 0, true,
- TGeoTranslation(-xEnv,yEnvP+dpar[1]+dysave+sparysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HBC[1],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HBC[3],iVolNum++,3, spar);
+ spar[1]=fgkSizeSupport2H[1];
+ spar[2]=fgkSizeSupport2H[2];
+ TString volEnvSuppAng4HBC1 = GetVolEnvSuppAngName("4", "H", "B", icount, 1);
+ TString volEnvSuppAng4HBC3 = GetVolEnvSuppAngName("4", "H", "B", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HBC1, 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1]+fDYsave+sparysave,-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HBC3, 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1]+fDYsave+sparysave,fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HBC1,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HBC3,iVolNum++,3, spar);
// X horizontal
- spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
- spar[1]=kSizeSupportXH[1];
- spar[2]=kSizeSupportXH[2];
- sparysavex=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHBC[1], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvM+dpar[1]+dysave+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHBC[3], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvP+dpar[1]+dysave+sparysave+1.0,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHBC[1],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHBC[3],iVolNum++,3, spar);
+ spar[0]=(fgkYVSup[3]-fgkYVSup[0])/2.*zRatio;
+ spar[1]=fgkSizeSupportXH[1];
+ spar[2]=fgkSizeSupportXH[2];
+ sparysavex=spar[1];
+ TString volEnvSuppAngXHBC1 = GetVolEnvSuppAngName("X", "H", "B", icount, 1);
+ TString volEnvSuppAngXHBC3 = GetVolEnvSuppAngName("X", "H", "B", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHBC1, 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,yEnvM+dpar[1]+fDYsave+sparysave+1.0,
+ -(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHBC3, 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),yEnvP+dpar[1]+fDYsave+sparysave+1.0,
+ fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHBC1,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHBC3,iVolNum++,3, spar);
// X vertical
- spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
- spar[1]=kSizeSupportXV[1];
- spar[2]=kSizeSupportXV[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVBC[1], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvM+dpar[1]+dysave+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVBC[3], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvP+dpar[1]+dysave+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVBC[1],iVolNum++,3, spar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVBC[3],iVolNum++,3, spar);
-
+ spar[0]=(fgkYVSup[3]-fgkYVSup[0])/2.*zRatio;
+ spar[1]=fgkSizeSupportXV[1];
+ spar[2]=fgkSizeSupportXV[2];
+ TString volEnvSuppAngXVBC1 = GetVolEnvSuppAngName("X", "V", "B", icount, 1);
+ TString volEnvSuppAngXVBC3 = GetVolEnvSuppAngName("X", "V", "B", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVBC1, 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,
+ yEnvM+dpar[1]+fDYsave+sparysave+1.0+sparysavex+spar[1],-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVBC3, 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),
+ yEnvP+dpar[1]+fDYsave+sparysave+1.0+sparysavex+spar[1],fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVBC1,iVolNum++,3, spar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVBC3,iVolNum++,3, spar);
+
+ // keep values of yEnvP, yEnvM
+ fYEnvPsave = yEnvP;
+ fYEnvMsave = yEnvM;
+}
-// chamber type D, E and F (same size)
-// D
- yEnvPsave = yEnvP;
- yEnvMsave = yEnvM;
- yEnvP = (yEnvMsave + kYMIN * zRatio ) * zpm + kYMIN * zRatio;
- yEnvM = (yEnvPsave + kYMIN * zRatio ) * zmp + kYMIN * zRatio;
- dpar[0] = (kXMAX/2.)*zRatio;
- dpar[1] = kYMIN*zRatio;
-
- detElemId = (10+icount+1)*100+16;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[2], detElemId, true, TGeoTranslation(xEnv,-yEnvP,kZp));
- detElemId = (10+icount+1)*100+2;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[6], detElemId, true, TGeoTranslation(xEnv, yEnvP,kZp));
- detElemId = (10+icount+1)*100+11;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[11], detElemId, true, TGeoTranslation(-xEnv,-yEnvM,kZm),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- detElemId = (10+icount+1)*100+7;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[15], detElemId, true, TGeoTranslation(-xEnv, yEnvM,kZm),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[2],iVolNum++,3, dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[6],iVolNum++,3, dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[11],iVolNum++,3, dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[15],iVolNum++,3, dpar);
+//______________________________________________________________________________
+void AliMUONTriggerGeometryBuilder::BuildChamberTypeD(Int_t& iVolNum, Int_t icount)
+{
+// ratio of zpos1m/zpos1p and inverse for first plane
+ Float_t zpos1= AliMUONConstants::DefaultChamberZ(10);
+ Float_t zmp=(zpos1-3.6)/(zpos1+3.6);
+ Float_t zpm=1./zmp;
+ Float_t zRatio = AliMUONConstants::DefaultRatioTriggerChamber(icount);
+ Float_t xEnv = (fgkDXZERO+fgkXMAX/2.)*zRatio;
+
+ Double_t dpar[3];
+ Double_t spar[3];
+ Double_t ppar[3];
+
+// D
+ Float_t yEnvP = 0;
+ Float_t yEnvM = 0;
+ yEnvP = (fYEnvMsave + fgkYMIN * zRatio ) * zpm + fgkYMIN * zRatio;
+ yEnvM = (fYEnvPsave + fgkYMIN * zRatio ) * zmp + fgkYMIN * zRatio;
+ dpar[0] = (fgkXMAX/2.)*zRatio;
+ dpar[1] = fgkYMIN*zRatio;
+ dpar[2] = 0.4;
+
+ Int_t detElemId = (10+icount+1)*100+16;
+ TString volEnv2 = GetVolEnvName(icount, 2);
+ TString volEnv6 = GetVolEnvName(icount, 6);
+ TString volEnv11 = GetVolEnvName(icount, 11);
+ TString volEnv15 = GetVolEnvName(icount, 15);
+ TString volAlu = GetVolumeName("volAlu", icount);
+
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnv2, detElemId, true, TGeoTranslation(xEnv,-yEnvP,fgkZp));
+ detElemId = (10+icount+1)*100+2;
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnv6, detElemId, true, TGeoTranslation(xEnv, yEnvP,fgkZp));
+ detElemId = (10+icount+1)*100+11;
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnv11, detElemId, true, TGeoTranslation(-xEnv,-yEnvM,fgkZm),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ detElemId = (10+icount+1)*100+7;
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnv15, detElemId, true, TGeoTranslation(-xEnv, yEnvM,fgkZm),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAlu,volEnv2,iVolNum++,3, dpar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAlu,volEnv6,iVolNum++,3, dpar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAlu,volEnv11,iVolNum++,3, dpar);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAlu,volEnv15,iVolNum++,3, dpar);
// horizontal cable support chamber type D
- spar[0]=dpar[0]-(kYVSup[0]/2.)*zRatio;
- spar[1]=kSizeSupportCable[1];
- spar[2]=kSizeSupportCable[2];
- for(Int_t in=0;in<3;in++){
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHD[in], 0, true, TGeoTranslation(xEnv+kYVSup[0]/2.*zRatio,-(yEnvP+dpar[1]/2.*(in-1)),-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHD[in+3], 0, true, TGeoTranslation(xEnv+kYVSup[0]/2.*zRatio, yEnvP+dpar[1]/2.*(in-1),-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHD[in+6], 0, true, TGeoTranslation(-(xEnv+kYVSup[0]/2.*zRatio),-(yEnvM+dpar[1]/2.*(in-1)),kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHD[in+9], 0, true, TGeoTranslation(-(xEnv+kYVSup[0]/2.*zRatio),yEnvM+dpar[1]/2.*(in-1),kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- }
- for(Int_t ii=0;ii<12;ii++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluSupportH,volEnvSupportHD[ii],iVolNum++,3, spar);
-
+ char volEnvSupportHD[12][8];
+ for(Int_t jj=0;jj<2;jj++){
+ for(Int_t ii=0;ii<6;ii++){
+ snprintf(volEnvSupportHD[6*jj+ii],8,"SA%dHD%d",icount+1,6*jj+ii);
+ }
+ }
+
+ spar[0]=dpar[0]-(fgkYVSup[0]/2.)*zRatio;
+ spar[1]=fgkSizeSupportCable[1];
+ spar[2]=fgkSizeSupportCable[2];
+ for(Int_t in=0;in<3;in++){
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHD[in], 0, true,
+ TGeoTranslation(xEnv+fgkYVSup[0]/2.*zRatio,-(yEnvP+dpar[1]/2.*(in-1)),
+ -(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHD[in+3], 0, true,
+ TGeoTranslation(xEnv+fgkYVSup[0]/2.*zRatio, yEnvP+dpar[1]/2.*(in-1),
+ -(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHD[in+6], 0, true,
+ TGeoTranslation(-(xEnv+fgkYVSup[0]/2.*zRatio),-(yEnvM+dpar[1]/2.*(in-1)),
+ fgkSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHD[in+9], 0, true,
+ TGeoTranslation(-(xEnv+fgkYVSup[0]/2.*zRatio),yEnvM+dpar[1]/2.*(in-1),
+ fgkSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ }
+ for(Int_t ii=0;ii<12;ii++) {
+ TString volAluSupportH = GetVolumeName("volAluSupportH", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluSupportH,volEnvSupportHD[ii],iVolNum++,3, spar);
+ }
+
// angular supports chamber type D
// 1 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1V[1];
- spar[2]=kSizeSupport1V[2];
- sparysave=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VD[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP-dpar[1],kZp+dpar[2]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VD[1], 0, true,
- TGeoTranslation(xEnv,yEnvP-dpar[1],kZp+dpar[2]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VD[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM-dpar[1],kZm-dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VD[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM-dpar[1],kZm-dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VD[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1V[1];
+ spar[2]=fgkSizeSupport1V[2];
+ Double_t sparysave=spar[1];
+
+ TString volEnvSuppAng1VD[4];
+ volEnvSuppAng1VD[0] = GetVolEnvSuppAngName("1", "V", "D", icount, 0);
+ volEnvSuppAng1VD[1] = GetVolEnvSuppAngName("1", "V", "D", icount, 1);
+ volEnvSuppAng1VD[2] = GetVolEnvSuppAngName("1", "V", "D", icount, 2);
+ volEnvSuppAng1VD[3] = GetVolEnvSuppAngName("1", "V", "D", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VD[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1],fgkZp+dpar[2]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VD[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1],fgkZp+dpar[2]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VD[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1],fgkZm-dpar[2]-spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VD[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1],fgkZm-dpar[2]-spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+
+ TString volAluAngSupport1V = GetVolAluAngSuppName("1", "V", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VD[i],iVolNum++,3, spar);
// 1 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1H[1];
- spar[2]=kSizeSupport1H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HD[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave,kZp+dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HD[1], 0, true,
- TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,kZp+dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HD[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HD[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HD[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1H[1];
+ spar[2]=fgkSizeSupport1H[2];
+
+ TString volEnvSuppAng1HD[4];
+ volEnvSuppAng1HD[0] = GetVolEnvSuppAngName("1", "H", "D", icount, 0);
+ volEnvSuppAng1HD[1] = GetVolEnvSuppAngName("1", "H", "D", icount, 1);
+ volEnvSuppAng1HD[2] = GetVolEnvSuppAngName("1", "H", "D", icount, 2);
+ volEnvSuppAng1HD[3] = GetVolEnvSuppAngName("1", "H", "D", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HD[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave,fgkZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HD[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,fgkZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HD[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave,fgkZm-(dpar[2]-spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HD[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,fgkZm-(dpar[2]-spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport1H = GetVolAluAngSuppName("1", "H", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HD[i],iVolNum++,3, spar);
// gas pipe (low)
- ppar[0]=kSizeGasPipe[0];
- ppar[1]=kSizeGasPipe[1];
- ppar[2]=dpar[0];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1D[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1D[1], 0, true,
- TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1D[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1D[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1D[i],iVolNum++,3, ppar);
+ ppar[0]=fgkSizeGasPipe[0];
+ ppar[1]=fgkSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ TString volEnvInoxGasPipe1D[4];
+ volEnvInoxGasPipe1D[0] = GetVolEnvInoxGasPipeName("1", "D", icount, 0);
+ volEnvInoxGasPipe1D[1] = GetVolEnvInoxGasPipeName("1", "D", icount, 1);
+ volEnvInoxGasPipe1D[2] = GetVolEnvInoxGasPipeName("1", "D", icount, 2);
+ volEnvInoxGasPipe1D[3] = GetVolEnvInoxGasPipeName("1", "D", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1D[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave-fgkOffsetGasPipe,fgkZp),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1D[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave-fgkOffsetGasPipe,fgkZp),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1D[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave-fgkOffsetGasPipe,fgkZm),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1D[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave-fgkOffsetGasPipe,fgkZm),fRsupportpipe);
+
+ TString volInoxGasPipe = GetVolumeName("volInoxGasPipe", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1D[i],iVolNum++,3, ppar);
// 2 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2V[1];
- spar[2]=kSizeSupport2V[2];
- sparysave=spar[1]+kSizeSupport2H[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VD[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP-dpar[1],kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VD[1], 0, true,
- TGeoTranslation(xEnv,yEnvP-dpar[1],kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VD[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM-dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VD[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM-dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VD[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2V[1];
+ spar[2]=fgkSizeSupport2V[2];
+ sparysave=spar[1]+fgkSizeSupport2H[1];
+ TString volEnvSuppAng2VD[4];
+ volEnvSuppAng2VD[0] = GetVolEnvSuppAngName("2", "V", "D", icount, 0);
+ volEnvSuppAng2VD[1] = GetVolEnvSuppAngName("2", "V", "D", icount, 1);
+ volEnvSuppAng2VD[2] = GetVolEnvSuppAngName("2", "V", "D", icount, 2);
+ volEnvSuppAng2VD[3] = GetVolEnvSuppAngName("2", "V", "D", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VD[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1],fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VD[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1],fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VD[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1],-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VD[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1],-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport2V = GetVolAluAngSuppName("2", "V", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VD[i],iVolNum++,3, spar);
// 2 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2H[1];
- spar[2]=kSizeSupport2H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HD[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave,kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HD[1], 0, true,
- TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HD[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HD[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HD[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2H[1];
+ spar[2]=fgkSizeSupport2H[2];
+ TString volEnvSuppAng2HD[4];
+ volEnvSuppAng2HD[0] = GetVolEnvSuppAngName("2", "H", "D", icount, 0);
+ volEnvSuppAng2HD[1] = GetVolEnvSuppAngName("2", "H", "D", icount, 1);
+ volEnvSuppAng2HD[2] = GetVolEnvSuppAngName("2", "H", "D", icount, 2);
+ volEnvSuppAng2HD[3] = GetVolEnvSuppAngName("2", "H", "D", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HD[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave,fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HD[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HD[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave,-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HD[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport2H = GetVolAluAngSuppName("2", "H", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HD[i],iVolNum++,3, spar);
// 3 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1V[1];
- spar[2]=kSizeSupport1V[2];
- sparysave=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VD[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP+dpar[1],kZp+dpar[2]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VD[1], 0, true,
- TGeoTranslation(xEnv,yEnvP+dpar[1],kZp+dpar[2]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VD[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM+dpar[1],kZm-dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VD[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM+dpar[1],kZm-dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VD[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1V[1];
+ spar[2]=fgkSizeSupport1V[2];
+ sparysave=spar[1];
+ TString volEnvSuppAng3VD[4];
+ volEnvSuppAng3VD[0] = GetVolEnvSuppAngName("3", "V", "D", icount, 0);
+ volEnvSuppAng3VD[1] = GetVolEnvSuppAngName("3", "V", "D", icount, 1);
+ volEnvSuppAng3VD[2] = GetVolEnvSuppAngName("3", "V", "D", icount, 2);
+ volEnvSuppAng3VD[3] = GetVolEnvSuppAngName("3", "V", "D", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VD[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1],fgkZp+dpar[2]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VD[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1],fgkZp+dpar[2]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VD[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1],fgkZm-dpar[2]-spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VD[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1],fgkZm-dpar[2]-spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport3V = GetVolAluAngSuppName("3", "V", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VD[i],iVolNum++,3, spar);
// 3 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1H[1];
- spar[2]=kSizeSupport1H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HD[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave,kZp+dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HD[1], 0, true,
- TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,kZp+dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HD[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HD[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HD[i],iVolNum++,3, spar);
-
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1H[1];
+ spar[2]=fgkSizeSupport1H[2];
+ TString volEnvSuppAng3HD[4];
+ volEnvSuppAng3HD[0] = GetVolEnvSuppAngName("3", "H", "D", icount, 0);
+ volEnvSuppAng3HD[1] = GetVolEnvSuppAngName("3", "H", "D", icount, 1);
+ volEnvSuppAng3HD[2] = GetVolEnvSuppAngName("3", "H", "D", icount, 2);
+ volEnvSuppAng3HD[3] = GetVolEnvSuppAngName("3", "H", "D", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HD[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave,fgkZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HD[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,fgkZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HD[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave,fgkZm-(dpar[2]-spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HD[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,fgkZm-(dpar[2]-spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport3H = GetVolAluAngSuppName("3", "H", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HD[i],iVolNum++,3, spar);
+
// gas pipe (high)
- ppar[0]=kSizeGasPipe[0];
- ppar[1]=kSizeGasPipe[1];
- ppar[2]=dpar[0];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2D[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2D[1], 0, true,
- TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2D[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2D[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2D[i],iVolNum++,3, ppar);
+ ppar[0]=fgkSizeGasPipe[0];
+ ppar[1]=fgkSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ TString volEnvInoxGasPipe2D[4];
+ volEnvInoxGasPipe2D[0] = GetVolEnvInoxGasPipeName("2", "D", icount, 0);
+ volEnvInoxGasPipe2D[1] = GetVolEnvInoxGasPipeName("2", "D", icount, 1);
+ volEnvInoxGasPipe2D[2] = GetVolEnvInoxGasPipeName("2", "D", icount, 2);
+ volEnvInoxGasPipe2D[3] = GetVolEnvInoxGasPipeName("2", "D", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2D[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave+fgkOffsetGasPipe,fgkZp),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2D[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave+fgkOffsetGasPipe,fgkZp),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2D[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave+fgkOffsetGasPipe,fgkZm),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2D[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave+fgkOffsetGasPipe,fgkZm),fRsupportpipe);
+
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2D[i],iVolNum++,3, ppar);
// 4 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2V[1];
- spar[2]=kSizeSupport2V[2];
- sparysave=spar[1]+kSizeSupport2H[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VD[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP+dpar[1],kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VD[1], 0, true,
- TGeoTranslation(xEnv,yEnvP+dpar[1],kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VD[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM+dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VD[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM+dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VD[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2V[1];
+ spar[2]=fgkSizeSupport2V[2];
+ sparysave=spar[1]+fgkSizeSupport2H[1];
+ TString volEnvSuppAng4VD[4];
+ volEnvSuppAng4VD[0] = GetVolEnvSuppAngName("4", "V", "D", icount, 0);
+ volEnvSuppAng4VD[1] = GetVolEnvSuppAngName("4", "V", "D", icount, 1);
+ volEnvSuppAng4VD[2] = GetVolEnvSuppAngName("4", "V", "D", icount, 2);
+ volEnvSuppAng4VD[3] = GetVolEnvSuppAngName("4", "V", "D", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VD[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1],fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VD[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1],fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VD[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1],-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VD[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1],-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport4V = GetVolAluAngSuppName("4", "V", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VD[i],iVolNum++,3, spar);
// 4 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2H[1];
- spar[2]=kSizeSupport2H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HD[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave,kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HD[1], 0, true,
- TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HD[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HD[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HD[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2H[1];
+ spar[2]=fgkSizeSupport2H[2];
+ TString volEnvSuppAng4HD[4];
+ volEnvSuppAng4HD[0] = GetVolEnvSuppAngName("4", "H", "D", icount, 0);
+ volEnvSuppAng4HD[1] = GetVolEnvSuppAngName("4", "H", "D", icount, 1);
+ volEnvSuppAng4HD[2] = GetVolEnvSuppAngName("4", "H", "D", icount, 2);
+ volEnvSuppAng4HD[3] = GetVolEnvSuppAngName("4", "H", "D", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HD[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave,fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HD[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HD[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave,-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HD[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport4H = GetVolAluAngSuppName("4", "H", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HD[i],iVolNum++,3, spar);
// X horizontal
- spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
- spar[1]=kSizeSupportXH[1];
- spar[2]=kSizeSupportXH[2];
- sparysavex=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHD[0], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,-yEnvP+dpar[1]+sparysave+1.0,kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHD[1], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0,kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHD[2], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHD[3], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),-yEnvM+dpar[1]+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHD[i],iVolNum++,3, spar);
+ spar[0]=(fgkYVSup[3]-fgkYVSup[0])/2.*zRatio;
+ spar[1]=fgkSizeSupportXH[1];
+ spar[2]=fgkSizeSupportXH[2];
+ Double_t sparysavex=spar[1];
+ TString volEnvSuppAngXHD[4];
+ volEnvSuppAngXHD[0] = GetVolEnvSuppAngName("X", "H", "D", icount, 0);
+ volEnvSuppAngXHD[1] = GetVolEnvSuppAngName("X", "H", "D", icount, 1);
+ volEnvSuppAngXHD[2] = GetVolEnvSuppAngName("X", "H", "D", icount, 2);
+ volEnvSuppAngXHD[3] = GetVolEnvSuppAngName("X", "H", "D", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHD[0], 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,-yEnvP+dpar[1]+sparysave+1.0,
+ fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHD[1], 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0,
+ fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHD[2], 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0,
+ -(fgkSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHD[3], 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),-yEnvM+dpar[1]+sparysave+1.0,
+ -(fgkSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupportXH = GetVolAluAngSuppName("X", "H", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHD[i],iVolNum++,3, spar);
// X vertical
- spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
- spar[1]=kSizeSupportXV[1];
- spar[2]=kSizeSupportXV[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVD[0], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,-yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVD[1], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVD[2], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVD[3], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),-yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVD[i],iVolNum++,3, spar);
+ spar[0]=(fgkYVSup[3]-fgkYVSup[0])/2.*zRatio;
+ spar[1]=fgkSizeSupportXV[1];
+ spar[2]=fgkSizeSupportXV[2];
+ TString volEnvSuppAngXVD[4];
+ volEnvSuppAngXVD[0] = GetVolEnvSuppAngName("X", "V", "D", icount, 0);
+ volEnvSuppAngXVD[1] = GetVolEnvSuppAngName("X", "V", "D", icount, 1);
+ volEnvSuppAngXVD[2] = GetVolEnvSuppAngName("X", "V", "D", icount, 2);
+ volEnvSuppAngXVD[3] = GetVolEnvSuppAngName("X", "V", "D", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVD[0], 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,-yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],
+ fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVD[1], 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],
+ fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVD[2], 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],
+ -(fgkSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVD[3], 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),-yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],
+ -(fgkSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupportXV = GetVolAluAngSuppName("X", "V", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVD[i],iVolNum++,3, spar);
+
+ // keep values of yEnvP, yEnvM
+ fYEnvPsave = yEnvP;
+ fYEnvMsave = yEnvM;
+}
+
+//______________________________________________________________________________
+void AliMUONTriggerGeometryBuilder::BuildChamberTypeE(Int_t& iVolNum, Int_t icount)
+{
+// ratio of zpos1m/zpos1p and inverse for first plane
+ Float_t zpos1= AliMUONConstants::DefaultChamberZ(10);
+ Float_t zmp=(zpos1-3.6)/(zpos1+3.6);
+ Float_t zpm=1./zmp;
+ Float_t zRatio = AliMUONConstants::DefaultRatioTriggerChamber(icount);
+ Float_t xEnv = (fgkDXZERO+fgkXMAX/2.)*zRatio;
+
+ Double_t dpar[3];
+ Double_t spar[3];
+ Double_t ppar[3];
// E
- yEnvPsave = yEnvP;
- yEnvMsave = yEnvM;
- yEnvP = (yEnvMsave + kYMIN * zRatio ) * zpm + kYMIN * zRatio;
- yEnvM = (yEnvPsave + kYMIN * zRatio ) * zmp + kYMIN * zRatio;
-
- detElemId = (10+icount+1)*100+15;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[1], detElemId, true, TGeoTranslation(xEnv,-yEnvM,kZm));
- detElemId = (10+icount+1)*100+3;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[7], detElemId, true, TGeoTranslation(xEnv, yEnvM,kZm));
- detElemId = (10+icount+1)*100+12;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[10], detElemId, true, TGeoTranslation(-xEnv,-yEnvP,kZp),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- detElemId = (10+icount+1)*100+6;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[16], detElemId, true, TGeoTranslation(-xEnv, yEnvP,kZp),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[1],iVolNum++,3,dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[7],iVolNum++,3,dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[10],iVolNum++,3,dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[16],iVolNum++,3,dpar);
+ Float_t yEnvP = 0;
+ Float_t yEnvM = 0;
+ yEnvP = (fYEnvMsave + fgkYMIN * zRatio ) * zpm + fgkYMIN * zRatio;
+ yEnvM = (fYEnvPsave + fgkYMIN * zRatio ) * zmp + fgkYMIN * zRatio;
+
+ Int_t detElemId = (10+icount+1)*100+15;
+ TString volEnv1 = GetVolEnvName(icount, 1);
+ TString volEnv7 = GetVolEnvName(icount, 7);
+ TString volEnv10 = GetVolEnvName(icount, 10);
+ TString volEnv16 = GetVolEnvName(icount, 16);
+ TString volAlu = GetVolumeName("volAlu", icount);
+
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnv1, detElemId, true, TGeoTranslation(xEnv,-yEnvM,fgkZm));
+ detElemId = (10+icount+1)*100+3;
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnv7, detElemId, true, TGeoTranslation(xEnv, yEnvM,fgkZm));
+ detElemId = (10+icount+1)*100+12;
+ GetEnvelopes(16+icount)->AddEnvelope(volEnv10, detElemId, true, TGeoTranslation(-xEnv,-yEnvP,fgkZp),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ detElemId = (10+icount+1)*100+6;
+ GetEnvelopes(16+icount)->AddEnvelope(volEnv16, detElemId, true, TGeoTranslation(-xEnv, yEnvP,fgkZp),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv1,iVolNum++,3,dpar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv7,iVolNum++,3,dpar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv10,iVolNum++,3,dpar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv16,iVolNum++,3,dpar);
// horizontal cable support chamber type E
- spar[0]=dpar[0]-(kYVSup[0]/2.)*zRatio;
- spar[1]=kSizeSupportCable[1];
- spar[2]=kSizeSupportCable[2];
- for(Int_t in=0;in<3;in++){
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHE[in], 0, true, TGeoTranslation(xEnv+kYVSup[0]/2.*zRatio,-(yEnvM+dpar[1]/2.*(in-1)),kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHE[in+3], 0, true, TGeoTranslation(xEnv+kYVSup[0]/2.*zRatio, yEnvM+dpar[1]/2.*(in-1),kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHE[in+6], 0, true, TGeoTranslation(-(xEnv+kYVSup[0]/2.*zRatio),-(yEnvP+dpar[1]/2.*(in-1)),-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHE[in+9], 0, true, TGeoTranslation(-(xEnv+kYVSup[0]/2.*zRatio), yEnvP+dpar[1]/2.*(in-1),-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- }
- for(Int_t ii=0;ii<12;ii++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluSupportH,volEnvSupportHE[ii],iVolNum++,3, spar);
-
+ char volEnvSupportHE[12][8];
+ for(Int_t jj=0;jj<2;jj++){
+ for(Int_t ii=0;ii<6;ii++){
+ snprintf(volEnvSupportHE[6*jj+ii],8,"SA%dHE%d",icount+1,6*jj+ii);
+ }
+ }
+
+ spar[0]=dpar[0]-(fgkYVSup[0]/2.)*zRatio;
+ spar[1]=fgkSizeSupportCable[1];
+ spar[2]=fgkSizeSupportCable[2];
+ for(Int_t in=0;in<3;in++){
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHE[in], 0, true, TGeoTranslation(xEnv+fgkYVSup[0]/2.*zRatio,-(yEnvM+dpar[1]/2.*(in-1)),fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHE[in+3], 0, true, TGeoTranslation(xEnv+fgkYVSup[0]/2.*zRatio, yEnvM+dpar[1]/2.*(in-1),fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHE[in+6], 0, true, TGeoTranslation(-(xEnv+fgkYVSup[0]/2.*zRatio),-(yEnvP+dpar[1]/2.*(in-1)),-(fgkSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHE[in+9], 0, true, TGeoTranslation(-(xEnv+fgkYVSup[0]/2.*zRatio), yEnvP+dpar[1]/2.*(in-1),-(fgkSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ }
+ for(Int_t ii=0;ii<12;ii++) {
+ TString volAluSupportH = GetVolumeName("volAluSupportH", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluSupportH,volEnvSupportHE[ii],iVolNum++,3, spar);
+ }
+
// angular supports chamber type E
// 1 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1V[1];
- spar[2]=kSizeSupport1V[2];
- sparysave=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VE[0], 0, true,
- TGeoTranslation(xEnv,-yEnvM-dpar[1],kZm-dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VE[1], 0, true,
- TGeoTranslation(xEnv,yEnvM-dpar[1],kZm-dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VE[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvP-dpar[1],kZp+dpar[2]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VE[3], 0, true,
- TGeoTranslation(-xEnv,yEnvP-dpar[1],kZp+dpar[2]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1V[1];
+ spar[2]=fgkSizeSupport1V[2];
+ Double_t sparysave=spar[1];
+
+ TString volEnvSuppAng1VE[4];
+ volEnvSuppAng1VE[0] = GetVolEnvSuppAngName("1", "V", "E", icount, 0);
+ volEnvSuppAng1VE[1] = GetVolEnvSuppAngName("1", "V", "E", icount, 1);
+ volEnvSuppAng1VE[2] = GetVolEnvSuppAngName("1", "V", "E", icount, 2);
+ volEnvSuppAng1VE[3] = GetVolEnvSuppAngName("1", "V", "E", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VE[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1],fgkZm-dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VE[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM-dpar[1],fgkZm-dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VE[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1],fgkZp+dpar[2]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VE[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP-dpar[1],fgkZp+dpar[2]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VE[i],iVolNum++,3, spar);
+ TString volAluAngSupport1V = GetVolAluAngSuppName("1", "V", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VE[i],iVolNum++,3, spar);
// 1 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1H[1];
- spar[2]=kSizeSupport1H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HE[0], 0, true,
- TGeoTranslation(xEnv,-yEnvM-dpar[1]-sparysave,kZm-(dpar[2]-spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HE[1], 0, true,
- TGeoTranslation(xEnv,yEnvM-dpar[1]-sparysave,kZm-(dpar[2]-spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HE[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvP-dpar[1]-sparysave,kZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HE[3], 0, true,
- TGeoTranslation(-xEnv,yEnvP-dpar[1]-sparysave,kZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HE[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1H[1];
+ spar[2]=fgkSizeSupport1H[2];
+
+ TString volEnvSuppAng1HE[4];
+ volEnvSuppAng1HE[0] = GetVolEnvSuppAngName("1", "H", "E", icount, 0);
+ volEnvSuppAng1HE[1] = GetVolEnvSuppAngName("1", "H", "E", icount, 1);
+ volEnvSuppAng1HE[2] = GetVolEnvSuppAngName("1", "H", "E", icount, 2);
+ volEnvSuppAng1HE[3] = GetVolEnvSuppAngName("1", "H", "E", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HE[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1]-sparysave,fgkZm-(dpar[2]-spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HE[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM-dpar[1]-sparysave,fgkZm-(dpar[2]-spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HE[2], 0, true, TGeoTranslation(-xEnv,-yEnvP-dpar[1]-sparysave,fgkZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HE[3], 0, true, TGeoTranslation(-xEnv,yEnvP-dpar[1]-sparysave,fgkZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport1H = GetVolAluAngSuppName("1", "H", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HE[i],iVolNum++,3, spar);
// gas pipe (low)
- ppar[0]=kSizeGasPipe[0];
- ppar[1]=kSizeGasPipe[1];
- ppar[2]=dpar[0];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1E[0], 0, true,
- TGeoTranslation(xEnv,-yEnvM-dpar[1]-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1E[1], 0, true,
- TGeoTranslation(xEnv,yEnvM-dpar[1]-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1E[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvP-dpar[1]-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1E[3], 0, true,
- TGeoTranslation(-xEnv,yEnvP-dpar[1]-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1E[i],iVolNum++,3, ppar);
+ ppar[0]=fgkSizeGasPipe[0];
+ ppar[1]=fgkSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ TString volEnvInoxGasPipe1E[4];
+ volEnvInoxGasPipe1E[0] = GetVolEnvInoxGasPipeName("1", "E", icount, 0);
+ volEnvInoxGasPipe1E[1] = GetVolEnvInoxGasPipeName("1", "E", icount, 1);
+ volEnvInoxGasPipe1E[2] = GetVolEnvInoxGasPipeName("1", "E", icount, 2);
+ volEnvInoxGasPipe1E[3] = GetVolEnvInoxGasPipeName("1", "E", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1E[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1]-sparysave-fgkOffsetGasPipe,fgkZm),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1E[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM-dpar[1]-sparysave-fgkOffsetGasPipe,fgkZm),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1E[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1]-sparysave-fgkOffsetGasPipe,fgkZp),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1E[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP-dpar[1]-sparysave-fgkOffsetGasPipe,fgkZp),fRsupportpipe);
+
+ TString volInoxGasPipe = GetVolumeName("volInoxGasPipe", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1E[i],iVolNum++,3, ppar);
// 2 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2V[1];
- spar[2]=kSizeSupport2V[2];
- sparysave=spar[1]+kSizeSupport2H[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VE[0], 0, true,
- TGeoTranslation(xEnv,-yEnvM-dpar[1],-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VE[1], 0, true,
- TGeoTranslation(xEnv,yEnvM-dpar[1],-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VE[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvP-dpar[1],kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VE[3], 0, true,
- TGeoTranslation(-xEnv,yEnvP-dpar[1],kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VE[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2V[1];
+ spar[2]=fgkSizeSupport2V[2];
+ sparysave=spar[1]+fgkSizeSupport2H[1];
+ TString volEnvSuppAng2VE[4];
+ volEnvSuppAng2VE[0] = GetVolEnvSuppAngName("2", "V", "E", icount, 0);
+ volEnvSuppAng2VE[1] = GetVolEnvSuppAngName("2", "V", "E", icount, 1);
+ volEnvSuppAng2VE[2] = GetVolEnvSuppAngName("2", "V", "E", icount, 2);
+ volEnvSuppAng2VE[3] = GetVolEnvSuppAngName("2", "V", "E", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VE[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1],-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VE[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM-dpar[1],-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VE[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1],fgkSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VE[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP-dpar[1],fgkSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport2V = GetVolAluAngSuppName("2", "V", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VE[i],iVolNum++,3, spar);
// 2 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2H[1];
- spar[2]=kSizeSupport2H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HE[0], 0, true,
- TGeoTranslation(xEnv,-yEnvM-dpar[1]-sparysave,-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HE[1], 0, true,
- TGeoTranslation(xEnv,yEnvM-dpar[1]-sparysave,-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HE[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvP-dpar[1]-sparysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HE[3], 0, true,
- TGeoTranslation(-xEnv,yEnvP-dpar[1]-sparysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HE[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2H[1];
+ spar[2]=fgkSizeSupport2H[2];
+
+ TString volEnvSuppAng2HE[4];
+ volEnvSuppAng2HE[0] = GetVolEnvSuppAngName("2", "H", "E", icount, 0);
+ volEnvSuppAng2HE[1] = GetVolEnvSuppAngName("2", "H", "E", icount, 1);
+ volEnvSuppAng2HE[2] = GetVolEnvSuppAngName("2", "H", "E", icount, 2);
+ volEnvSuppAng2HE[3] = GetVolEnvSuppAngName("2", "H", "E", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HE[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1]-sparysave,-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HE[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM-dpar[1]-sparysave,-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HE[2], 0, true, TGeoTranslation(-xEnv,-yEnvP-dpar[1]-sparysave,fgkSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HE[3], 0, true, TGeoTranslation(-xEnv,yEnvP-dpar[1]-sparysave,fgkSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport2H = GetVolAluAngSuppName("2", "H", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HE[i],iVolNum++,3, spar);
// 3 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1V[1];
- spar[2]=kSizeSupport1V[2];
- sparysave=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VE[0], 0, true,
- TGeoTranslation(xEnv,-yEnvM+dpar[1],kZm-dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VE[1], 0, true,
- TGeoTranslation(xEnv,yEnvM+dpar[1],kZm-dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VE[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvP+dpar[1],kZp+dpar[2]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VE[3], 0, true,
- TGeoTranslation(-xEnv,yEnvP+dpar[1],kZp+dpar[2]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1V[1];
+ spar[2]=fgkSizeSupport1V[2];
+ sparysave=spar[1];
+ TString volEnvSuppAng3VE[4];
+ volEnvSuppAng3VE[0] = GetVolEnvSuppAngName("3", "V", "E", icount, 0);
+ volEnvSuppAng3VE[1] = GetVolEnvSuppAngName("3", "V", "E", icount, 1);
+ volEnvSuppAng3VE[2] = GetVolEnvSuppAngName("3", "V", "E", icount, 2);
+ volEnvSuppAng3VE[3] = GetVolEnvSuppAngName("3", "V", "E", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VE[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM+dpar[1],fgkZm-dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VE[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1],fgkZm-dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VE[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP+dpar[1],fgkZp+dpar[2]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VE[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1],fgkZp+dpar[2]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VE[i],iVolNum++,3, spar);
+ TString volAluAngSupport3V = GetVolAluAngSuppName("3", "V", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VE[i],iVolNum++,3, spar);
// 3 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1H[1];
- spar[2]=kSizeSupport1H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HE[0], 0, true,
- TGeoTranslation(xEnv,-yEnvM+dpar[1]+sparysave,kZm-(dpar[2]-spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HE[1], 0, true,
- TGeoTranslation(xEnv,yEnvM+dpar[1]+sparysave,kZm-(dpar[2]-spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HE[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvP+dpar[1]+sparysave,kZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HE[3], 0, true,
- TGeoTranslation(-xEnv,yEnvP+dpar[1]+sparysave,kZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HE[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1H[1];
+ spar[2]=fgkSizeSupport1H[2];
+
+ TString volEnvSuppAng3HE[4];
+ volEnvSuppAng3HE[0] = GetVolEnvSuppAngName("3", "H", "E", icount, 0);
+ volEnvSuppAng3HE[1] = GetVolEnvSuppAngName("3", "H", "E", icount, 1);
+ volEnvSuppAng3HE[2] = GetVolEnvSuppAngName("3", "H", "E", icount, 2);
+ volEnvSuppAng3HE[3] = GetVolEnvSuppAngName("3", "H", "E", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HE[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM+dpar[1]+sparysave,fgkZm-(dpar[2]-spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HE[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1]+sparysave,fgkZm-(dpar[2]-spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HE[2], 0, true, TGeoTranslation(-xEnv,-yEnvP+dpar[1]+sparysave,fgkZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HE[3], 0, true, TGeoTranslation(-xEnv,yEnvP+dpar[1]+sparysave,fgkZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport3H = GetVolAluAngSuppName("3", "H", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HE[i],iVolNum++,3, spar);
// gas pipe (high)
- ppar[0]=kSizeGasPipe[0];
- ppar[1]=kSizeGasPipe[1];
- ppar[2]=dpar[0];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2E[0], 0, true,
- TGeoTranslation(xEnv,-yEnvM+dpar[1]+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2E[1], 0, true,
- TGeoTranslation(xEnv,yEnvM+dpar[1]+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2E[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvP+dpar[1]+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2E[3], 0, true,
- TGeoTranslation(-xEnv,yEnvP+dpar[1]+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2E[i],iVolNum++,3, ppar);
+ ppar[0]=fgkSizeGasPipe[0];
+ ppar[1]=fgkSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ TString volEnvInoxGasPipe2E[4];
+ volEnvInoxGasPipe2E[0] = GetVolEnvInoxGasPipeName("2", "E", icount, 0);
+ volEnvInoxGasPipe2E[1] = GetVolEnvInoxGasPipeName("2", "E", icount, 1);
+ volEnvInoxGasPipe2E[2] = GetVolEnvInoxGasPipeName("2", "E", icount, 2);
+ volEnvInoxGasPipe2E[3] = GetVolEnvInoxGasPipeName("2", "E", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2E[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM+dpar[1]+sparysave+fgkOffsetGasPipe,fgkZm),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2E[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1]+sparysave+fgkOffsetGasPipe,fgkZm),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2E[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP+dpar[1]+sparysave+fgkOffsetGasPipe,fgkZp),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2E[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1]+sparysave+fgkOffsetGasPipe,fgkZp),fRsupportpipe);
+
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2E[i],iVolNum++,3, ppar);
// 4 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2V[1];
- spar[2]=kSizeSupport2V[2];
- sparysave=spar[1]+kSizeSupport2H[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VE[0], 0, true,
- TGeoTranslation(xEnv,-yEnvM+dpar[1],-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VE[1], 0, true,
- TGeoTranslation(xEnv,yEnvM+dpar[1],-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VE[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvP+dpar[1],kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VE[3], 0, true,
- TGeoTranslation(-xEnv,yEnvP+dpar[1],kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VE[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2V[1];
+ spar[2]=fgkSizeSupport2V[2];
+ sparysave=spar[1]+fgkSizeSupport2H[1];
+
+ TString volEnvSuppAng4VE[4];
+ volEnvSuppAng4VE[0] = GetVolEnvSuppAngName("4", "V", "E", icount, 0);
+ volEnvSuppAng4VE[1] = GetVolEnvSuppAngName("4", "V", "E", icount, 1);
+ volEnvSuppAng4VE[2] = GetVolEnvSuppAngName("4", "V", "E", icount, 2);
+ volEnvSuppAng4VE[3] = GetVolEnvSuppAngName("4", "V", "E", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VE[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM+dpar[1],-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VE[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1],-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnvSuppAng4VE[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP+dpar[1],fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VE[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1],fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport4V = GetVolAluAngSuppName("4", "V", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VE[i],iVolNum++,3, spar);
// 4 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2H[1];
- spar[2]=kSizeSupport2H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HE[0], 0, true,
- TGeoTranslation(xEnv,-yEnvM+dpar[1]+sparysave,-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HE[1], 0, true,
- TGeoTranslation(xEnv,yEnvM+dpar[1]+sparysave,-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HE[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvP+dpar[1]+sparysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HE[3], 0, true,
- TGeoTranslation(-xEnv,yEnvP+dpar[1]+sparysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HE[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2H[1];
+ spar[2]=fgkSizeSupport2H[2];
+
+ TString volEnvSuppAng4HE[4];
+ volEnvSuppAng4HE[0] = GetVolEnvSuppAngName("4", "H", "E", icount, 0);
+ volEnvSuppAng4HE[1] = GetVolEnvSuppAngName("4", "H", "E", icount, 1);
+ volEnvSuppAng4HE[2] = GetVolEnvSuppAngName("4", "H", "E", icount, 2);
+ volEnvSuppAng4HE[3] = GetVolEnvSuppAngName("4", "H", "E", icount, 3);
+
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnvSuppAng4HE[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM+dpar[1]+sparysave,-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnvSuppAng4HE[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1]+sparysave,-(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnvSuppAng4HE[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP+dpar[1]+sparysave,fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HE[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1]+sparysave,fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport4H = GetVolAluAngSuppName("4", "H", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HE[i],iVolNum++,3, spar);
// X horizontal
- spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
- spar[1]=kSizeSupportXH[1];
- spar[2]=kSizeSupportXH[2];
- sparysavex=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHE[0], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,-yEnvM+dpar[1]+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHE[1], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvM+dpar[1]+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHE[2], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),-yEnvP+dpar[1]+sparysave+1.0,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHE[3], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvP+dpar[1]+sparysave+1.0,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHE[i],iVolNum++,3, spar);
+ spar[0]=(fgkYVSup[3]-fgkYVSup[0])/2.*zRatio;
+ spar[1]=fgkSizeSupportXH[1];
+ spar[2]=fgkSizeSupportXH[2];
+ Double_t sparysavex=spar[1];
+
+ TString volEnvSuppAngXHE[4];
+ volEnvSuppAngXHE[0] = GetVolEnvSuppAngName("X", "H", "E", icount, 0);
+ volEnvSuppAngXHE[1] = GetVolEnvSuppAngName("X", "H", "E", icount, 1);
+ volEnvSuppAngXHE[2] = GetVolEnvSuppAngName("X", "H", "E", icount, 2);
+ volEnvSuppAngXHE[3] = GetVolEnvSuppAngName("X", "H", "E", icount, 3);
+
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnvSuppAngXHE[0], 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,-yEnvM+dpar[1]+sparysave+1.0,
+ -(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnvSuppAngXHE[1], 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,yEnvM+dpar[1]+sparysave+1.0,
+ -(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHE[2], 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),-yEnvP+dpar[1]+sparysave+1.0,
+ fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHE[3], 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),yEnvP+dpar[1]+sparysave+1.0,
+ fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupportXH = GetVolAluAngSuppName("X", "H", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHE[i],iVolNum++,3, spar);
// X vertical
- spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
- spar[1]=kSizeSupportXV[1];
- spar[2]=kSizeSupportXV[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVE[0], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,-yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVE[1], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVE[2], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),-yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVE[3], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVE[i],iVolNum++,3, spar);
+ spar[0]=(fgkYVSup[3]-fgkYVSup[0])/2.*zRatio;
+ spar[1]=fgkSizeSupportXV[1];
+ spar[2]=fgkSizeSupportXV[2];
+
+ TString volEnvSuppAngXVE[4];
+ volEnvSuppAngXVE[0] = GetVolEnvSuppAngName("X", "V", "E", icount, 0);
+ volEnvSuppAngXVE[1] = GetVolEnvSuppAngName("X", "V", "E", icount, 1);
+ volEnvSuppAngXVE[2] = GetVolEnvSuppAngName("X", "V", "E", icount, 2);
+ volEnvSuppAngXVE[3] = GetVolEnvSuppAngName("X", "V", "E", icount, 3);
+
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnvSuppAngXVE[0], 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,-yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],
+ -(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnvSuppAngXVE[1], 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],
+ -(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnvSuppAngXVE[2], 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),-yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],
+ fgkSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnvSuppAngXVE[3], 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],
+ fgkSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupportXV = GetVolAluAngSuppName("X", "V", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVE[i],iVolNum++,3, spar);
+
+ // keep values of yEnvP, yEnvM
+ fYEnvPsave = yEnvP;
+ fYEnvMsave = yEnvM;
+}
+
+//______________________________________________________________________________
+void AliMUONTriggerGeometryBuilder::BuildChamberTypeF(Int_t& iVolNum, Int_t icount)
+{
+// ratio of zpos1m/zpos1p and inverse for first plane
+ Float_t zpos1= AliMUONConstants::DefaultChamberZ(10);
+ Float_t zmp=(zpos1-3.6)/(zpos1+3.6);
+ Float_t zpm=1./zmp;
+ Float_t zRatio = AliMUONConstants::DefaultRatioTriggerChamber(icount);
+ Float_t xEnv = (fgkDXZERO+fgkXMAX/2.)*zRatio;
+
+ Double_t dpar[3];
+ Double_t spar[3];
+ Double_t ppar[3];
// F
- yEnvPsave = yEnvP;
- yEnvMsave = yEnvM;
- yEnvP = (yEnvMsave + kYMIN * zRatio ) * zpm + kYMIN * zRatio;
- yEnvM = (yEnvPsave + kYMIN * zRatio ) * zmp + kYMIN * zRatio;
-
- detElemId = (10+icount+1)*100+14;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[0], detElemId, true, TGeoTranslation(xEnv,-yEnvP,kZp));
- detElemId = (10+icount+1)*100+4;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[8], detElemId, true, TGeoTranslation(xEnv, yEnvP,kZp));
- detElemId = (10+icount+1)*100+13;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[9], detElemId, true, TGeoTranslation(-xEnv,-yEnvM,kZm),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- detElemId = (10+icount+1)*100+5;
- GetEnvelopes(16+icount)->AddEnvelope(volEnv[17], detElemId, true, TGeoTranslation(-xEnv, yEnvM,kZm),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[0],iVolNum++,3,dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[8],iVolNum++,3,dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[9],iVolNum++,3,dpar);
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[17],iVolNum++,3,dpar);
+ dpar[0] = (fgkXMAX/2.)*zRatio;
+ dpar[1] = fgkYMIN*zRatio;
+ dpar[2] = 0.4;
+
+ Float_t yEnvP = 0;
+ Float_t yEnvM = 0;
+ yEnvP = (fYEnvMsave + fgkYMIN * zRatio ) * zpm + fgkYMIN * zRatio;
+ yEnvM = (fYEnvPsave + fgkYMIN * zRatio ) * zmp + fgkYMIN * zRatio;
+
+ Int_t detElemId = (10+icount+1)*100+14;
+ TString volEnv0 = GetVolEnvName(icount, 0);
+ TString volEnv8 = GetVolEnvName(icount, 8);
+ TString volEnv9 = GetVolEnvName(icount, 9);
+ TString volEnv17 = GetVolEnvName(icount, 17);
+ TString volAlu = GetVolumeName("volAlu", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnv0, detElemId, true, TGeoTranslation(xEnv,-yEnvP,fgkZp));
+ detElemId = (10+icount+1)*100+4;
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnv8, detElemId, true, TGeoTranslation(xEnv, yEnvP,fgkZp));
+ detElemId = (10+icount+1)*100+13;
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnv9, detElemId, true, TGeoTranslation(-xEnv,-yEnvM,fgkZm),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ detElemId = (10+icount+1)*100+5;
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnv17, detElemId, true, TGeoTranslation(-xEnv, yEnvM,fgkZm),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv0,iVolNum++,3,dpar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv8,iVolNum++,3,dpar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv9,iVolNum++,3,dpar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv17,iVolNum++,3,dpar);
// horizontal cable support chamber type F
- spar[0]=dpar[0]-(kYVSup[0]/2.)*zRatio;
- spar[1]=kSizeSupportCable[1];
- spar[2]=kSizeSupportCable[2];
- for(Int_t in=0;in<3;in++){
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHF[in], 0, true, TGeoTranslation(xEnv+kYVSup[0]/2.*zRatio,-(yEnvP+dpar[1]/2.*(in-1)),-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHF[in+3], 0, true, TGeoTranslation(xEnv+kYVSup[0]/2.*zRatio,yEnvP+dpar[1]/2.*(in-1),-(kSizeVSupExt[0]+spar[2])));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHF[in+6], 0, true, TGeoTranslation(-(xEnv+kYVSup[0]/2.*zRatio),-(yEnvM+dpar[1]/2.*(in-1)),kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHF[in+9], 0, true, TGeoTranslation(-(xEnv+kYVSup[0]/2.*zRatio), yEnvM+dpar[1]/2.*(in-1),kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- }
- for(Int_t ii=0;ii<12;ii++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluSupportH,volEnvSupportHF[ii],iVolNum++,3, spar);
+ char volEnvSupportHF[12][8];
+ for(Int_t jj=0;jj<2;jj++){
+ for(Int_t ii=0;ii<6;ii++){
+ snprintf(volEnvSupportHF[6*jj+ii],8,"SA%dHF%d",icount+1,6*jj+ii);
+ }
+ }
+
+ spar[0]=dpar[0]-(fgkYVSup[0]/2.)*zRatio;
+ spar[1]=fgkSizeSupportCable[1];
+ spar[2]=fgkSizeSupportCable[2];
+ for(Int_t in=0;in<3;in++){
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnvSupportHF[in], 0, true,
+ TGeoTranslation(xEnv+fgkYVSup[0]/2.*zRatio,-(yEnvP+dpar[1]/2.*(in-1)),
+ -(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnvSupportHF[in+3], 0, true,
+ TGeoTranslation(xEnv+fgkYVSup[0]/2.*zRatio,yEnvP+dpar[1]/2.*(in-1),
+ -(fgkSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnvSupportHF[in+6], 0, true,
+ TGeoTranslation(-(xEnv+fgkYVSup[0]/2.*zRatio),-(yEnvM+dpar[1]/2.*(in-1)),
+ fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)
+ ->AddEnvelope(volEnvSupportHF[in+9], 0, true,
+ TGeoTranslation(-(xEnv+fgkYVSup[0]/2.*zRatio), yEnvM+dpar[1]/2.*(in-1),
+ fgkSizeVSupExt[0]+spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ }
+ for(Int_t ii=0;ii<12;ii++) {
+ TString volAluSupportH = GetVolumeName("volAluSupportH", icount);
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluSupportH,volEnvSupportHF[ii],iVolNum++,3, spar);
+ }
// angular supports chamber type F
// 1 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1V[1];
- spar[2]=kSizeSupport1V[2];
- sparysave=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VF[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP-dpar[1],kZp+dpar[2]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VF[1], 0, true,
- TGeoTranslation(xEnv,yEnvP-dpar[1],kZp+dpar[2]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VF[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM-dpar[1],kZm-dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VF[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM-dpar[1],kZm-dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1V[1];
+ spar[2]=fgkSizeSupport1V[2];
+ Double_t sparysave=spar[1];
+ TString volEnvSuppAng1VF[4];
+ volEnvSuppAng1VF[0] = GetVolEnvSuppAngName("1", "V", "F", icount, 0);
+ volEnvSuppAng1VF[1] = GetVolEnvSuppAngName("1", "V", "F", icount, 1);
+ volEnvSuppAng1VF[2] = GetVolEnvSuppAngName("1", "V", "F", icount, 2);
+ volEnvSuppAng1VF[3] = GetVolEnvSuppAngName("1", "V", "F", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VF[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1],fgkZp+dpar[2]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VF[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1],fgkZp+dpar[2]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VF[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1],fgkZm-dpar[2]-spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VF[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1],fgkZm-dpar[2]-spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VF[i],iVolNum++,3, spar);
+ TString volAluAngSupport1V = GetVolAluAngSuppName("1", "V", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VF[i],iVolNum++,3, spar);
// 1 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1H[1];
- spar[2]=kSizeSupport1H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HF[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave,kZp+dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HF[1], 0, true,
- TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,kZp+dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HF[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HF[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HF[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1H[1];
+ spar[2]=fgkSizeSupport1H[2];
+
+ TString volEnvSuppAng1HF[4];
+ volEnvSuppAng1HF[0] = GetVolEnvSuppAngName("1", "H", "F", icount, 0);
+ volEnvSuppAng1HF[1] = GetVolEnvSuppAngName("1", "H", "F", icount, 1);
+ volEnvSuppAng1HF[2] = GetVolEnvSuppAngName("1", "H", "F", icount, 2);
+ volEnvSuppAng1HF[3] = GetVolEnvSuppAngName("1", "H", "F", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HF[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave,fgkZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HF[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,fgkZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HF[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave,fgkZm-(dpar[2]-spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HF[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,fgkZm-(dpar[2]-spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport1H = GetVolAluAngSuppName("1", "H", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HF[i],iVolNum++,3, spar);
// gas pipe (low)
- ppar[0]=kSizeGasPipe[0];
- ppar[1]=kSizeGasPipe[1];
- ppar[2]=dpar[0];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1F[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1F[1], 0, true,
- TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1F[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1F[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1F[i],iVolNum++,3, ppar);
+ ppar[0]=fgkSizeGasPipe[0];
+ ppar[1]=fgkSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ TString volEnvInoxGasPipe1F[4];
+ volEnvInoxGasPipe1F[0] = GetVolEnvInoxGasPipeName("1", "F", icount, 0);
+ volEnvInoxGasPipe1F[1] = GetVolEnvInoxGasPipeName("1", "F", icount, 1);
+ volEnvInoxGasPipe1F[2] = GetVolEnvInoxGasPipeName("1", "F", icount, 2);
+ volEnvInoxGasPipe1F[3] = GetVolEnvInoxGasPipeName("1", "F", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1F[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave-fgkOffsetGasPipe,fgkZp),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1F[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave-fgkOffsetGasPipe,fgkZp),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1F[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave-fgkOffsetGasPipe,fgkZm),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1F[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave-fgkOffsetGasPipe,fgkZm),fRsupportpipe);
+
+ TString volInoxGasPipe = GetVolumeName("volInoxGasPipe", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1F[i],iVolNum++,3, ppar);
// 2 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2V[1];
- spar[2]=kSizeSupport2V[2];
- sparysave=spar[1]+kSizeSupport2H[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VF[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP-dpar[1],kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VF[1], 0, true,
- TGeoTranslation(xEnv,yEnvP-dpar[1],kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VF[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM-dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VF[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM-dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VF[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2V[1];
+ spar[2]=fgkSizeSupport2V[2];
+ sparysave=spar[1]+fgkSizeSupport2H[1];
+
+ TString volEnvSuppAng2VF[4];
+ volEnvSuppAng2VF[0] = GetVolEnvSuppAngName("2", "V", "F", icount, 0);
+ volEnvSuppAng2VF[1] = GetVolEnvSuppAngName("2", "V", "F", icount, 1);
+ volEnvSuppAng2VF[2] = GetVolEnvSuppAngName("2", "V", "F", icount, 2);
+ volEnvSuppAng2VF[3] = GetVolEnvSuppAngName("2", "V", "F", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VF[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1],fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VF[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1],fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VF[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1],-(fgkSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VF[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1],-(fgkSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport2V = GetVolAluAngSuppName("2", "V", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VF[i],iVolNum++,3, spar);
// 2 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2H[1];
- spar[2]=kSizeSupport2H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HF[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave,kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HF[1], 0, true,
- TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HF[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HF[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HF[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2H[1];
+ spar[2]=fgkSizeSupport2H[2];
+
+ TString volEnvSuppAng2HF[4];
+ volEnvSuppAng2HF[0] = GetVolEnvSuppAngName("2", "H", "F", icount, 0);
+ volEnvSuppAng2HF[1] = GetVolEnvSuppAngName("2", "H", "F", icount, 1);
+ volEnvSuppAng2HF[2] = GetVolEnvSuppAngName("2", "H", "F", icount, 2);
+ volEnvSuppAng2HF[3] = GetVolEnvSuppAngName("2", "H", "F", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HF[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave,fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HF[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HF[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave,-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HF[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport2H = GetVolAluAngSuppName("2", "H", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HF[i],iVolNum++,3, spar);
// 3 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1V[1];
- spar[2]=kSizeSupport1V[2];
- sparysave=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VF[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP+dpar[1],kZp+dpar[2]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VF[1], 0, true,
- TGeoTranslation(xEnv,yEnvP+dpar[1],kZp+dpar[2]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VF[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM+dpar[1],kZm-dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VF[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM+dpar[1],kZm-dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VF[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1V[1];
+ spar[2]=fgkSizeSupport1V[2];
+ sparysave=spar[1];
+
+ TString volEnvSuppAng3VF[4];
+ volEnvSuppAng3VF[0] = GetVolEnvSuppAngName("3", "V", "F", icount, 0);
+ volEnvSuppAng3VF[1] = GetVolEnvSuppAngName("3", "V", "F", icount, 1);
+ volEnvSuppAng3VF[2] = GetVolEnvSuppAngName("3", "V", "F", icount, 2);
+ volEnvSuppAng3VF[3] = GetVolEnvSuppAngName("3", "V", "F", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VF[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1],fgkZp+dpar[2]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VF[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1],fgkZp+dpar[2]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VF[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1],fgkZm-dpar[2]-spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VF[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1],fgkZm-dpar[2]-spar[2]),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport3V = GetVolAluAngSuppName("3", "V", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VF[i],iVolNum++,3, spar);
// 3 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport1H[1];
- spar[2]=kSizeSupport1H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HF[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave,kZp+dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HF[1], 0, true,
- TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,kZp+dpar[2]-spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HF[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HF[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HF[i],iVolNum++,3, spar);
-
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport1H[1];
+ spar[2]=fgkSizeSupport1H[2];
+
+ TString volEnvSuppAng3HF[4];
+ volEnvSuppAng3HF[0] = GetVolEnvSuppAngName("3", "H", "F", icount, 0);
+ volEnvSuppAng3HF[1] = GetVolEnvSuppAngName("3", "H", "F", icount, 1);
+ volEnvSuppAng3HF[2] = GetVolEnvSuppAngName("3", "H", "F", icount, 2);
+ volEnvSuppAng3HF[3] = GetVolEnvSuppAngName("3", "H", "F", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HF[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave,fgkZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HF[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,fgkZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HF[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave,fgkZm-(dpar[2]-spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HF[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,fgkZm-(dpar[2]-spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport3H = GetVolAluAngSuppName("3", "H", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HF[i],iVolNum++,3, spar);
+
// gas pipe (high)
- ppar[0]=kSizeGasPipe[0];
- ppar[1]=kSizeGasPipe[1];
- ppar[2]=dpar[0];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2F[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2F[1], 0, true,
- TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2F[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
- GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2F[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2F[i],iVolNum++,3, ppar);
+ ppar[0]=fgkSizeGasPipe[0];
+ ppar[1]=fgkSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ TString volEnvInoxGasPipe2F[4];
+ volEnvInoxGasPipe2F[0] = GetVolEnvInoxGasPipeName("2", "F", icount, 0);
+ volEnvInoxGasPipe2F[1] = GetVolEnvInoxGasPipeName("2", "F", icount, 1);
+ volEnvInoxGasPipe2F[2] = GetVolEnvInoxGasPipeName("2", "F", icount, 2);
+ volEnvInoxGasPipe2F[3] = GetVolEnvInoxGasPipeName("2", "F", icount, 3);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2F[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave+fgkOffsetGasPipe,fgkZp),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2F[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave+fgkOffsetGasPipe,fgkZp),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2F[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave+fgkOffsetGasPipe,fgkZm),fRsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2F[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave+fgkOffsetGasPipe,fgkZm),fRsupportpipe);
+
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2F[i],iVolNum++,3, ppar);
// 4 vertical
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2V[1];
- spar[2]=kSizeSupport2V[2];
- sparysave=spar[1]+kSizeSupport2H[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VF[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP+dpar[1],kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VF[1], 0, true,
- TGeoTranslation(xEnv,yEnvP+dpar[1],kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VF[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM+dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VF[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM+dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VF[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2V[1];
+ spar[2]=fgkSizeSupport2V[2];
+ sparysave=spar[1]+fgkSizeSupport2H[1];
+
+ TString volEnvSuppAng4VF[4];
+ volEnvSuppAng4VF[0] = GetVolEnvSuppAngName("4", "V", "F", icount, 0);
+ volEnvSuppAng4VF[1] = GetVolEnvSuppAngName("4", "V", "F", icount, 1);
+ volEnvSuppAng4VF[2] = GetVolEnvSuppAngName("4", "V", "F", icount, 2);
+ volEnvSuppAng4VF[3] = GetVolEnvSuppAngName("4", "V", "F", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VF[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1],fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VF[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1],fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VF[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1],-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VF[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1],-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport4V = GetVolAluAngSuppName("4", "V", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VF[i],iVolNum++,3, spar);
// 4 horizontal
- spar[0]=dpar[0];
- spar[1]=kSizeSupport2H[1];
- spar[2]=kSizeSupport2H[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HF[0], 0, true,
- TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave,kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HF[1], 0, true,
- TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HF[2], 0, true,
- TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HF[3], 0, true,
- TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HF[i],iVolNum++,3, spar);
+ spar[0]=dpar[0];
+ spar[1]=fgkSizeSupport2H[1];
+ spar[2]=fgkSizeSupport2H[2];
+
+ TString volEnvSuppAng4HF[4];
+ volEnvSuppAng4HF[0] = GetVolEnvSuppAngName("4", "H", "F", icount, 0);
+ volEnvSuppAng4HF[1] = GetVolEnvSuppAngName("4", "H", "F", icount, 1);
+ volEnvSuppAng4HF[2] = GetVolEnvSuppAngName("4", "H", "F", icount, 2);
+ volEnvSuppAng4HF[3] = GetVolEnvSuppAngName("4", "H", "F", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HF[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave,fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HF[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HF[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave,-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HF[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,-(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupport4H = GetVolAluAngSuppName("4", "H", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HF[i],iVolNum++,3, spar);
// X horizontal
- spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
- spar[1]=kSizeSupportXH[1];
- spar[2]=kSizeSupportXH[2];
- sparysavex=spar[1];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHF[0], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,-yEnvP+dpar[1]+sparysave+1.0,kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHF[1], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0,kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHF[2], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),-yEnvM+dpar[1]+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHF[3], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHF[i],iVolNum++,3, spar);
+ spar[0]=(fgkYVSup[3]-fgkYVSup[0])/2.*zRatio;
+ spar[1]=fgkSizeSupportXH[1];
+ spar[2]=fgkSizeSupportXH[2];
+ Double_t sparysavex=spar[1];
+
+ TString volEnvSuppAngXHF[4];
+ volEnvSuppAngXHF[0] = GetVolEnvSuppAngName("X", "H", "F", icount, 0);
+ volEnvSuppAngXHF[1] = GetVolEnvSuppAngName("X", "H", "F", icount, 1);
+ volEnvSuppAngXHF[2] = GetVolEnvSuppAngName("X", "H", "F", icount, 2);
+ volEnvSuppAngXHF[3] = GetVolEnvSuppAngName("X", "H", "F", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHF[0], 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,-yEnvP+dpar[1]+sparysave+1.0,
+ fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHF[1], 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0,
+ fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHF[2], 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),-yEnvM+dpar[1]+sparysave+1.0,
+ -(fgkSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHF[3], 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0,
+ -(fgkSizeVSupExt[0]+spar[2])),
+ TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupportXH = GetVolAluAngSuppName("X", "H", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHF[i],iVolNum++,3, spar);
// X vertical
- spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
- spar[1]=kSizeSupportXV[1];
- spar[2]=kSizeSupportXV[2];
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVF[0], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,-yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVF[1], 0, true,
- TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVF[2], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),-yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
- GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVF[3], 0, true,
- TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
-
- for(i=0;i<4;i++)
- GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVF[i],iVolNum++,3, spar);
-
+ spar[0]=(fgkYVSup[3]-fgkYVSup[0])/2.*zRatio;
+ spar[1]=fgkSizeSupportXV[1];
+ spar[2]=fgkSizeSupportXV[2];
+
+ TString volEnvSuppAngXVF[4];
+ volEnvSuppAngXVF[0] = GetVolEnvSuppAngName("X", "V", "F", icount, 0);
+ volEnvSuppAngXVF[1] = GetVolEnvSuppAngName("X", "V", "F", icount, 1);
+ volEnvSuppAngXVF[2] = GetVolEnvSuppAngName("X", "V", "F", icount, 2);
+ volEnvSuppAngXVF[3] = GetVolEnvSuppAngName("X", "V", "F", icount, 3);
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVF[0], 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,-yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],
+ fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVF[1], 0, true,
+ TGeoTranslation(spar[0]+fgkYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],
+ fgkSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVF[2], 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),-yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],
+ -(fgkSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVF[3], 0, true,
+ TGeoTranslation(-(spar[0]+fgkYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],
+ -(fgkSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ TString volAluAngSupportXV = GetVolAluAngSuppName("X", "V", icount);
+ for (Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)
+ ->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVF[i],iVolNum++,3, spar);
+
+ // keep values of yEnvP, yEnvM
+ fYEnvPsave = yEnvP;
+ fYEnvMsave = yEnvM;
+}
+
+//
+// public methods
+//
+
+//______________________________________________________________________________
+void AliMUONTriggerGeometryBuilder::CreateGeometry()
+{
+/// From AliMUONv1::CreateGeometry()
+
+ /*
+ zpos1 and zpos2 are the middle of the first and second
+ planes of station 1 (+1m for second station):
+ zpos1=(zpos1m+zpos1p)/2=(15999+16071)/2=16035 mm, thick/2=40 mm
+ zpos2=(zpos2m+zpos2p)/2=(16169+16241)/2=16205 mm, thick/2=40 mm
+ zposxm and zposxp= middles of gaz gaps within a detection plane
+ rem: the total thickness accounts for 1 mm of al on both
+ side of the RPCs (see zpos1 and zpos2)
+ */
+
+ fIdtmed = fMUON->GetIdtmed()->GetArray()-1099;
+ fIdAir= fIdtmed[1100]; // medium 1
+ fIdAlu1=fIdtmed[1103]; // medium 4
+ fIdInox = fIdtmed[1128]; // medium 29 Stainless Steel (18%Cr,9%Ni,Fe)
+
+ Double_t dstation = ( ( - AliMUONConstants::DefaultChamberZ(11)) -
+ ( - AliMUONConstants::DefaultChamberZ(10)) ) /2.1;
+ Float_t par[3];
+ par[2] = dstation;
+
+ Int_t icount=0; // chamber counter (0 1 2 3)
+
+ for (Int_t istation=0; istation<2; istation++) { // loop on stations
+ for (Int_t iplane=0; iplane<2; iplane++) { // loop on detection planes
+
+ Int_t iVolNum=1; // counter Volume Number
+ icount = Int_t(iplane<<0)+Int_t(istation<<1);
+
+ cout << "## In AliMUONTriggerGeometryBuilder " << icount << endl;
+
+ par[0] = AliMUONConstants::Rmin(5+istation);
+ par[1] = AliMUONConstants::Rmax(5+istation);
+ Char_t volName[6];
+ snprintf(volName,6,"%s%d", "SC",11+icount);
+ gMC->Gsvolu(volName,"TUBE", fIdAir, par, 3);
+
+// chamber prototype
+ BuildChamberPrototype(icount);
+
+// RPC supports (vertical)
+ BuildRPCSupportsVertical(iVolNum, icount);
+
+// RPC supports (horizontal)
+
+// supports for cables
+ BuildRPCSupportsHorizontal(icount);
+
+// Angular supports for chambers
+ BuildAngularSupportForChambers(icount);
+
+// gas pipes
+ BuildGasPipes(icount);
+
+// chamber type A
+ BuildChamberTypeA(iVolNum, icount);
+
+// chamber type B (plus envelope chambers B & C)
+ BuildChamberTypeB(iVolNum, icount);
+
+// chamber type D, E and F (same size)
+ BuildChamberTypeD(iVolNum, icount);
+ BuildChamberTypeE(iVolNum, icount);
+ BuildChamberTypeF(iVolNum, icount);
} // end loop on detection planes
} // end loop on stations
}
git://git.uio.no / u / mrichter / AliRoot.git / commitdiff